witeg GER100920-1 - PMI-Labortechnik · Fuzzy Control System 4, 5 - Digital Intelligence, Maximum...
Transcript of witeg GER100920-1 - PMI-Labortechnik · Fuzzy Control System 4, 5 - Digital Intelligence, Maximum...
witeg
Laboratory Instruments
Gel Doc. SystemPage. 38~41
HomogenizersPage. 64~68
Heating & Cooling BlockPage. 45~49
Digital RotatorPage. 132
Vortex MixerPage. 133
ULT(Deep) FreezersPage. 120~129
Hotplate StirrersCompact & Round-plate Page. 75, 78, 79
Heating MantlePage. 50~63
ISO 9001:2000 CertifiedISO 13485 Certified Products
CE-Marked ProductsCE-MDD Marked Products
Validation (IQ, OQ & PQ) Service
www.witeg.de
ww
w.w
iteg
.de
ISO 9001 : 2000 CertifiedISO 13485 Certified ProductsCE-Marked ProductsCE-MDD Marked ProductsValidation (IQ, OQ & PQ) Service
www.witeg.de
GER100920
GER
100920
witeg Labortechnik GmbHAm Bildacker 16 ● D-97877 WertheimP.O.Box16 63 ● D-97866 Wertheimphone : +49 (0) 9342 / 9301-0fax : +49 (0) 9342 / 9301-77Internet :www.witeg.deE-mail : [email protected]
DIN ISO 9001
Quality-assurance at the users, an additionalachievement at no cost... from witeg
Together with witeg into the future
It is our aim to keep on translating our company’s philosophy into reality,
preliminarily quality to the benefit of our customers. We permanently
perform investment of qualified and engaged collaboration in order to reach
the optimum level of quality.
Furthermore, we stress to make use of the latest computer-aided
equipment and technique which is necessary to obtain best performance
and utmost quality.
witeg-qualitycertified according to DIN 9001 at a very early stage
Already in May 1994 we obtained the Certification "ISO 9001 "
ensuring officially that witeg complies with the highest international
standards of requirement.
To our business partners this means confidence and reliability for a
common safety handling of our products in the future. In order to offer high
value instruments, in a period of tough international competition, it is
important to rely on rational quality-ensuring economical processes.
Eventually, we wish to remain powerful pricewise.
Whenever you work according to EN ISO9000 et seq., with the products of witeg
you process it easily. Quality is our target tothe benefit of our partnership. Quality
SafetyEnvironment Management
●CE-marks EMC & LVD Compliance.
The certified Laboratory Instruments are
specified in this catalog
●ISO 9001:2000 System Certification
Design, Development, Manufacture & Servicing
for All Laboraory Instruments.
www.witeg.de
Certificates
CERTIFICATES
3
Legal notice
Factory 1 - Production & ManagementAm Bildacker 16D-97877 Wertheim
Factory 2 - Stock & ForwardingHüttenweg 3D-97877 Wertheim
phone : +49 (0) 9342 / 9301 - 0fax : +49 (0) 9342 / 9301 - 77Internet: www.witeg.deE-mail: [email protected]
�� copyright 2010 witeg Labortechnik GmbH
Digital Fuzzy Control System - Digital Feedback control by High-Performance
Microprocessor- Superior control accuracy for Temperature & RPM
Easy-to-Use- Compact Design and Simplest User-Interface- 1 or 2 Mode Buttons + Jog-Shuttle Switch
Patented User-Interface- Specially Designed Operation Mode Mechanism
for Intuitive Setting & Control
- Simple Mode Transition (eg. Set Temp Mode �
Set RPM Mode � Set Timer Mode � Locking Mode)
Digital LCD Display- High-Quality LCD with Back-Light Function
- Displays Set Value, Present Value and Operation Status
Intuitive Operation Lamps- Indicates Operation Status of the Machine
Heating, Stirring, Timer, Refrigeration, etc.
Jog-Shuttle (Turn + Push)Unified Controlling Knob for All Operation of the Unit- Input of Set Value, Start & Stop of Operation,
Storage of Set Values
Fuzzy Control SystemDigital Intelligence, Maximum Efficiency
Multi-Functional Digital Feedback Controllerincorporated into all witeg Digital Instruments
Innovative Laboratory Instruments with Intelligent Digital Control Technology
◀
◀
◀
▶
▶
▶
Fuzzy ControlD
igit
al I
nte
llig
ence
,M
axim
um
Eff
icie
ncy
4
WiseBath�� Water Baths, Extraction Baths, High-temp Baths,Shaking Water Baths and Viscosity Baths
WiseCircu�� Circulation Water Baths, High-temp Bath Circulators,Refrigerated Bath Circulators and Cold Trap Baths
WiseClave�� Autoclaves (Steam Sterilizers)WiseCryo�� Freezers & Ultra Low Temperature FreezersWiseCube�� Incubators, Cold Lab Chambers, Growth Chambers and Temp./Humidity
ChambersWiseDoc�� Gel Documentation SystemWiseMix�� Mills, Mixers, Rockers, Rotators and Vortex MixerWiseShake�� ShakersWiseStir�� Magnetic Stirrers, Overhead Stirrers and Jar TestersWiseTherm�� Furnaces, Heating Mantles, Hotplates and Thermo BlocksWiseTis�� HomogenizersWiseUv�� TransilluminatorsWiseVen�� Ovens
Registered Trademarks for Intelligent LaboratoryInstruments made by witeg Labortechnik GmbH▶▶
www.witeg.de 5
Family
Fuzzy Control System 4, 5- Digital Intelligence, Maximum Efficiency -
Autoclaves - Steam Sterilizer WiseClave� 8~11Baths 12~34
Circulation Water Baths WiseCircu� 15, 16Cold Trap Baths WiseCircu� 30Extraction Water Baths WiseBath� 18, 19General Purpose Water Baths WiseBath� 13, 14 High Temperature Circulators WiseCircu� 24, 25High Temperature Oil Baths WiseBath� 22, 23Immersion Circulator Head WiseCircu� 17Multi - Chamber Water Baths WiseBath� 20, 21Refrigerated Bath Circulators WiseCircu� 26~29Shaking Water Baths WiseBath� 31, 32Viscosity Water Baths WiseBath� 33, 34
Centrifuges WiseSpin� 35Dry Bath-Heating & Cooling WiseTherm� 45~49Electrophoresis 36~41
Gel Documentation Systems WiseDoc� 38~41UV Transilluminators WiseUV � 37
Freezers WiseCryo� 117~129Lab Freezers 119Ultra Low Temperature Freezer WiseCryo� 120~129
Upright Type 122~126Chest Type 127Personal Type 128, 129
Furnaces WiseTherm� 42~44Heating Mantles WiseTherm� 50~63
Beaker Heating Mantles 56, 57Digital Controller for Heating Mantles 62, 63Heating Tapes 63Multi Heating Mantles 61Reaction Vessel Heating Mantles 58~60Spherical Flask Heating Mantles 52~55
Homogenizers WiseTis� 64~68Hotplates WiseTherm� 70~73Hotplate Stirrers WiseStir � 74~80
Multi-Hotplate Stirrer 80Round-plate Hotplate Stirrer 75, 78, 79Square-plate Hotplate Stirrer 74, 76, 77
Incubators WiseCube� 81~104
6
Environmental(Temp./Humidity) Chambers 88~91Gravity/Natural-Flow, Incubators 84, 85Horizontal/Forced-Flow, Incubators 82, 83Low Temperature(BOD) Incubators 96, 97Multi-Room Incubators 86, 87Plant Growth / Environmental Chambers 92~95Shaking Incubators 98~103
Jar Tester for Flocculation Test WiseStir� 159Mill - Ball Mills WiseMix� 104Ovens WiseVen� 105~116
Gravity / Natural-Flow Ovens 110, 111Hi-Clean Air Ovens 106, 107Industrial Ovens 112, 113Mechanical / Forced-Air (Horizontal-flow) 108, 109Vacuum Ovens 114, 115Vacuum Pumps 116
Refrigerators WiseCryo� 117~129Cold Lab Chambers WiseCube� 118Lab Freezers 119Ultra Low Temperature Freezer WiseCryo� 120~129
Upright Type 122~126Chest Type 127Personal Type 128, 129
Rockers WiseMix� 131Rotators WiseMix� 132Shakers WiseShake� 134~137
Orbital Shakers 134, 135Reciprocating Shakers 136, 137
Stirrers, Magnetic WiseStir� 138~148Stirring only 139~141With Heating (Hotplate Stirrer) 74~80/142~148
Stirrers, Overhead WiseStir� 149~158High - Speed Models 150~152High - Torque Models 153~1556-Paddle Stirrer / Jar Tester 159Accessories 156, 157Selection Guide 158
Ultrasonic Cleaners WiseClean� 160~162UV Transilluminators WiseUV� 37Validation Service (IQ,OQ & PQ) 168Vortex Mixer WiseMix� 133
Product Lines 163~167Certificates 171
7www.witeg.de
●● Steam Sterilizers Digital Fuzzy-Controlled Autoclaves.
- Complete Safety Pressure Mechanism.
- Strong and Safety Screw Handle Door.
- Special Steam Condensing Mechanism for User Safety.
WAC-60
▶▶Steam Sterilizer Digital Fuzzy-Controlled Autoclave
WiseClave��
AutoclavesAutoclaves
8
10
Autoclaves, Steam Sterilizer Au
SpecificationModel WAC-47 WAC-60 WAC-80
Controller Digital Fuzzy-Control System (Fully Automatic)
Dimension(w××d××h)
Inner (mm) Φ300×h670 Φ350×h650 Φ400×h650
Outer (mm) 680×470×880 680×470×900 780×580×900
Dimension of Basket Φ 270×h 250 Φ 320×h 250 Φ 370×h 250
Heater 2 kW 3 kW 2 kW ×2
Capacity 47 Lit. 60 Lit. 80 Lit.
Temp.Range Ambient 5 ℃ to 132 ℃
Accuracy ±0,5 ℃ at 121 ℃
Sterilization mode Liquid or Solid mode
Display Digital LCD Display with Back-Light Function
Timer 99 hr 59 min 59 sec
Pressure 1,2 Kgf / cm2 at 121 ℃, 2,0 Kgf / cm2 at 132 ℃
Gauge 0 ~ 3 kgf / cm2
MaterialPressure Vessel Stainless Steel (#304)
External Powder Coated Steel
Door Locking One Touch Pressure Handle Type
Safety Device
Over Temp., Over Pressure and Over Current ProtectorElectronic Door Lock Sensing System
Steam Condensing SystemAlarm (Error Status)
Basket 2 ea of Wire Baskets Included
Others CE-MDD (Medical Device Directive)
Packing Dimension(w××d××h) (mm) 800×700×1.280 940×800×1.350
Gross Weight 116 kg 171 kg
Power Consumption 2 kW 3 kW 4 kW
Power plug type Hybrid E+F 3~ 16A CEE
Power Supply� AC 230 V, 50 / 60 Hz 3~, AC 230 V, 50 / 60 Hz
Digital Fuzzy-Controlled Autoclave (WAC-60)
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseClave��WAC Steam Sterilizers, Digital Fuzzy-controlled Autoclaveswith Steam Condensing Mechanism, 2×Wire Basket, up to 132℃, Max.2 Kgf/cm2,47- /60- /80- Lit.
Strong and Safety-Screw Handle DoorStrong and Safety-Screw Handle Door
Digital Fuzzy Controller
Manual VentilationValve
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Steam Condensing Mechanism &Complete Safety Pressure Mechanism
■■ Special Steam Condensing Mechanism■■ Patented Jog-Shuttle Control System■■“CE-MDD (CE 0470-Medical Device Directive)
Application & Features� Ideal for Biotechnology, Clinical, Environmental, Medical and Food Industry.� Innovative Easy-to-Use Digital Fuzzy Controller. � Top-loading type Sterilizer for Easy Loading of Large Working Volume.� Casters equipped for Excellent Mobility. � Digital LCD Display with Back-Light Function.� Digital Timer Function -‘Delay Time’and ‘Operation Time’can be Controlled.� Solid / Liquid Mode can be chosen considering a Sample Phase.� Strong and Safety Screw Handle Door. � Complete Safety Pressure Mechanism.� Over-Temperature/-Pressure/-Current protection, Sensor Error Detection, Automatic Over
Pressure Release Valve Ensure User Safety.� Electronic Door Lock Sensing System for User Safety.� Special Steam Condensing Mechanism-/ Heat-Protective Lid Cover for User Safety.� Patented Jog-Shuttle Control System.�“CE-MDD (CE 0470 -Medical Device Directive).
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
0470
<Continued on Next page>
witeg Labortechnik GmbH
www.witeg.de 11
AuAutoclaves, Steam Sterilizer
Stainless SteelBottom Perforated Basket
: Option
Stainless SteelWire Basket
: Spare
Ordering Information
DH.WAC01047� Autoclave, WAC-47, 47 Lit.DH.WAC01060� Autoclave, WAC-60, 60 Lit.DH.WAC01080� Autoclave, WAC-80, 80 Lit.
�2×Wire basket Included
Spare AccessoriesDH.WAC10047 Wire Basket, Stainless Steel, WAC10047,
Φ 270×h 250 mm, for 47 Lit.DH.WAC10060 Wire Basket, Stainless Steel, WAC10060,
Φ 320×h 250 mm, for 60 Lit.DH.WAC10080 Wire Basket, Stainless Steel, WAC10080,
Φ 370×h 250 mm, for 80 Lit.
Optional AccessoriesDH.WAC20047 Perforated Basket, Stainless Steel, WAC20047,
Φ 270×h 250 mm, for 47 Lit.DH.WAC20060 Perforated Basket, Stainless Steel, WAC20060,
Φ 320×h 250 mm, for 60 Lit.DH.WAC20080 Perforated Basket, Stainless Steel, WAC20080,
Φ 370×h 250 mm, for 80 Lit.
Validation (IQ, OQ & PQ) ServiceDH.WAC30047 Validation Service(IQ, OQ & PQ), ACV47, for WAC-47DH.WAC30060 Validation Service(IQ, OQ & PQ), ACV60, for WAC-60DH.WAC30080 Validation Service(IQ, OQ & PQ), ACV80, for WAC-80
<Continued from...““witeg””WiseClave��WAC Steam Sterilizers, Digital Fuzzy-controlled Autoclaves>
PPoowweerreedd bbyy FFuuzzzzyy CCoonnttrrooll SSyysstteemm
●● General Purpose Water Baths ●● Circulation Water Baths ●● Extraction Water Baths●● Multi- Chamber Water Baths●● High Temperature Oil Baths●● High Temperature Bath Circulators●● Refrigerated Bath Circulators●● Cold Trap Baths●● Shaking Water Baths●● Viscosity Water Baths
- Digital Fuzzy Controller Implementing Maximum Temperature Accuracy.
- Stainless Steel Bath for Superior Durability & High Thermal Efficiency.
WVB-30
▶▶Refrigerated Bath Circulators
▶▶High Temperature Bath Circulators
▶▶General Purpose Water Bath
▶▶Viscosity Water Bath
WB-11
WiseBath��& WiseCircu��
BathsBaths
WCH-12
WCH-8
WCR-P8WCR-P12
12
www.witeg.de 13
BaBaths, General Purpose
■■ Digital Fuzzy Controller Implementing Maximum Temp. Accuracy■■ Patented Jog-Shuttle Control System and Digital LCD Display
with Back-Light Function■■ CE Certified
Application & Features� Ideal for Biotechnology, Clinical, Environmental, Medical, Petroleum, Food Industry,
Pharmaceutical and Industrial Applications.�Digital Fuzzy Controller Implementing Maximum Temperature Accuracy.�User's Self-Compensation Function to Control Difference Between Real Temperature and
Indicated Temperature. (±10,0 ℃)�Stainless Steel Bath for Superior Durability & High Thermal Efficiency.�Stainless Steel Lid prevents Evaporation and keeps Constant Temperature.�Over Temperature & Over Current Protection, Sensor Error Detection.�Digital Timer Function(99 hr 59 min) :‘Delay Time’and ‘Operation Time’can be Controlled.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
Model WB - 6 WB - 11 WB - 22
Dimension(w××d××h)
Bath (mm) 300×155×150 302×240×150 500×295×150
External (mm) 325×180×260 325×265×260 535×330×260
Heater 800 W 1 kW 2 kW
Capacity 6 Lit. 11 Lit. 22 Lit.
Temp.
Range Ambient +5 ℃~ 100 ℃
Accuracy ± 0,1 ℃
Uniformity ± 1,0 ℃
Sensor PT100
Controller Digital Fuzzy Controller with Jog - Shuttle Switch (Turn+Push)
Display Digital LCD Display with Back-Light Function
Timer 99hr 59min (Delay & Continuous Function Included)
Safety Device Over Temp. and Over Current Protector, Sensor Error Detector
MaterialInternal Stainless Steel (#304)
External Powder Coated Steel
Lid Stainless Steel Flat Lid (included), Dome Lid (optional)
Drain None Included
Others
CE CertifiedStorage Function (Temp.& Timer)
Locking Mode (Jog-Shuttle Input Disabled)User Self - Compensation Function
Alarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm) 350×210×310 350×300×310 570×360×310
Gross Weight 8 kg 10 kg 14 kg
Power Consumption 800 W 1 kW 2 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Specification
Digtal Precise Water Bath (WB-11)
““witeg””WiseBath��WB Digital Precise Water Bath, 6-/11-/22- Lit.with Digital Fuzzy Control System & Stainless Steel Flat Lid, Back Light LCD, up to100 ℃, ±0,1 ℃
Back Light LCD
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
<Continued on Next page>
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
witeg Labortechnik GmbH14
Baths, General Purpose Ba
Ordering Information
DH.WB000106� Water Bath, WB-6 , 6 Lit.DH.WB000111� Water Bath, WB-11, 11 Lit.DH.WB000122� Water Bath, WB-22, 22 Lit.
�1×Stainless Steel Flat Lid Included
Spare AccessoriesDH.WB010106 Flat lid, Stainless Steel, BF106, for 6 Lit., w 325×d 176 mmDH.WB010111 Flat lid, Stainless Steel, BF111, for 11 Lit., w 325×d 265 mmDH.WB010122 Flat lid, Stainless Steel, BF122, for 22 Lit., w 530×d 325 mm
Optional AccessoriesDH.WB010206 Dome Lid, Stainless Steel, BD206, for 6 Lit.,
w 324×d 176×h 100 mmDH.WB010211 Dome Lid, Stainless Steel, BD211, for 11 Lit.,
w 324×d 263×h 100 mmDH.WB010222 Dome Lid, Stainless Steel, BD222, for 22 Lit.,
w 533×d 328×h 100 mm
DH.WB020106 Rack, Test tube, 36ea of Φ 17 mm Hole, BTH106, for 6 Lit., SUS, w 220×d 125×h 78,5 mm
DH.WB020206 Rack, Test tube, 15ea of Φ 32 mm Hole, BTH206, for 6 Lit., SUS, w 220×d 125×h 78,5 mm
DH.WB020111 Rack, Test tube, 63ea of Φ 17 mm Hole, BTH111, for 11/22 Lit., SUS, w 220×d 205×h 78,5 mm
DH.WB020211 Rack, Test tube, 25ea of Φ 32 mm Hole, BTH211, for 11/22 Lit., SUS, w 220×d 205×h 78,5 mm
DH.WB030106 Lid with Concentric Ring Cover Sets 2ea, Stainless Steel, BFC106, for 6 Lit., 330×182×20 mm
DH.WB030111 Lid with Concentric Ring Cover Sets 2ea, Stainless Steel, BFC111, for 11 Lit., 329×269×20 mm
DH.WB030122 Lid with Concentric Ring Cover Sets 6ea, Stainless Steel, BFC122, for 22 Lit., 539×334×20 mm
Validation (IQ, OQ & PQ) ServiceDH.WB040106 Validation Service(IQ, OQ & PQ), BV106, for WB-6. DH.WB040111 Validation Service(IQ, OQ & PQ), BV111, for WB-11. DH.WB040122 Validation Service(IQ, OQ & PQ), BV122, for WB-22.
Dome Lid (Optional)Flat Lid (Included)
Lid with Concentric RingCover Sets for 11Lit.
(BFC111)
Lid with Concentric RingCover Sets for 6Lit. (BFC106)
Test Tube RackLid with Concentric RingCover Sets for 22Lit. (BFC122)
<Continued from...““witeg””WiseBath��WB Digital Precise Water Bath>
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 222244--222277..
www.witeg.de 15
BaBaths, Circulation
Digtal Precise Circulation Water Bath (WCB-22)
Digital Fuzzy Controller
Flat Lid
Powerful Circulation Pump assures Temp. Uniformity. for both Internal and External Circulation
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
““witeg””WiseCircu��WCB Digital Precise Circulation Water Bath, 6-/11-/22- Lit.with Digital Fuzzy Control System & Stainless Steel Flat Lid, Back Light LCD, up to100 ℃,±0,1 ℃, 5 Lit./min
■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■ CE Certified
Application & Features� Ideal for Biotechnology, Clinical, Environmental, Medical, Petroleum, Food Industry,
Pharmaceutical and Industrial Applications.� Innovative Easy-to-Use Digital Fuzzy Controller.�Digital Timer Function :‘Delay Time’and ‘Operation Time’can be Contolled.�Warning and Automatic Stop Function in case of Liquid Shortage.�User's Self-Compensation Function to Control Difference between Real Temp.
and Indicated Temp. (±10,0 ℃)�Powerful Circulation Pump Assures Temp. Uniformity.: Internal and External Circulation. �Stainless Steel Bath(#304) for Superior Durability & High Thermal Efficiency.�Stainless Steel Lid Prevents Evaporation and keeps Constant Temperature. �Connection with Evaporators and Viscometers is applicable.�Over Temperature & Over Current Protection, Sensor Error & Low Level Detection.�Storage function for the Set Values of Temperature and Time.� Alarm function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
SpecificationModel WCB- 6 WCB - 11 WCB - 22
Dimension(w××d××h)
Bath (mm) 300×155×150 302×240×150 500×295×150
External (mm) 330×185×385 335×275×385 540×335×410
Heater 800 W 1 kW 2 kW
Capacity 6 Lit. 11 Lit. 22 Lit.
Temp.
Range Ambient+5 ℃~ 100 ℃
Accuracy ±0,1 ℃
Uniformity ±0,2 ℃
Sensor PT100
Pump 5 Lit. / min (Internal / External)
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)
Display Digital LCD Display with Back-Light Function
Timer 99hr 59min (Delay & Continuous function included)
Safety Device Over Temp. and Over Current Protector, Sensor Error and Low Level Detector
MaterialInternal Stainless Steel (#304)
External Powder Coated Steel
Lid Stainless Steel Flat Lid included
Drain None Included
Nozzle i.d. 7 mm o.d. 11 mm (i.d. 9 mm o.d. 12 mm silicon tube connected for inner circulation)
Others
CE CertifiedStorage Function (Temp.& Timer)
Locking Mode (Jog-Shuttle Input disabled)User Self - compensation function
Alarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm)
350×210×410 360×300×420 580×380×470
Gross Weight 11 kg 13 kg 18 kg
Power Consumption 800 W 1 kW 2 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
<Continued on Next page>
witeg Labortechnik GmbH16
Baths, CirculationBa
Efficient Use of Bathwith Level-Sensor
Ordering Information
DH.WCB00106� Circulation Water Bath, WCB-6 , 6 Lit.DH.WCB00111� Circulation Water Bath, WCB-11, 11 Lit.DH.WCB00122� Circulation Water Bath, WCB-22, 22 Lit.
�1×Stainless Flat Steel Lid Included
Spare AccessoriesDH.WCB10106 Flat Lid, Stainless Steel, CBF106, for 6 Lit., w 134×d 180 mmDH.WCB10111 Flat Lid, Stainless Steel, CBF111, for 11 Lit., w 186×d 273 mmDH.WCB10122 Flat Lid, Stainless Steel, CBF122, for 22 Lit., w 391×d 333 mm
Optional AccessoriesDH.WCB20106 Dome Lid, Stainless Steel, CBD106, for 6 Lit.,
w 132×d 182×h 121 mm DH.WCB20111 Dome Lid, Stainless Steel, CBD111, for 11 Lit.,
w 184×d 274×h 121 mm DH.WCB20122 Dome Lid, Stainless Steel, CBD122, for 22 Lit.,
w 389×d 334×h 121 mm
Validation (IQ, OQ & PQ) ServiceDH.WCB30106 Validation Service(IQ, OQ & PQ), CBV106, for WCB-6DH.WCB30111 Validation Service(IQ, OQ & PQ), CBV111, for WCB-11DH.WCB30122 Validation Service(IQ, OQ & PQ), CBV122, for WCB-12
Dome Lid (Optional)
<Continued from...““witeg””WiseCircu��WCB Digital Precise Circulation Water Bath>
www.witeg.de 17
BaBaths, Circulation
Model WCB - 11H WCB - 22H
Dimension (w××d××h) (mm) 130×165×320
Heater 1 kW 2 kW
Capacity 11 Lit. 22 Lit.
Temp.Range Ambient+5 ℃ ~ 100 ℃
Sensor PT100
Pump 5 Lit. / min
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)
Display Digital LCD Display with Back-Light Function
Timer 99 hr 59 min (Delay & Continuous Function included)
Safety Device Over Temp. and Over Current Protector, Sensor Error and Low Level Detector
Others
CE CertifiedPL(Product Liability) Insurance
Storage Function (Temp.& Timer)Locking Mode (Jog-Shuttle Input disabled)
User Self - Compensation FunctionAlarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm) 400×280×200
Gross Weight 8 kg 10 kg
Power Consumption 1 kW 2 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseCircu��WCB-H Digital Precise Immersion Circulator Head, 11-/22- Lit.Digital Fuzzy Control System, Back Light LCD, up to 100 ℃, 5 Lit./min
■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ Warning and Automatic Stop Function in case of Liquid Shortage■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■ CE Certified
Application & Features� Innovative Easy-to-Use Digital Fuzzy Controller.�Digital Timer Function : ‘Delay Time’ and ‘Operation Time’ can be Controlled.�Warning and Automatic Stop Function in case of Liquid Shortage.�User’s Self-Compensation Function to Control Difference between Real Temp.
and Indicated Temp. (±10,0 ℃)�Over Temperature & Over Current Protection, Sensor Error & Low Level Detection.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
Specification
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Digital Fuzzy Controller
320mm
130mm115mm
Ordering InformationDH.WCB10011 Immersion Circulator Head, WCB-11HDH.WCB10022 Immersion Circulator Head, WCB-22H
Digtal Precise Immersion Circulator Head (WCB-11H)
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Digtal Precise ImmersionCirculator Head
witeg Labortechnik GmbH18
Baths, ExtractionBa
Model WEB - 4 WEB - 6 WEB - 8
No. of Extraction Holes 4 Places 6 Places 8 (4×2) Places
Top Opening Dia. (mm) Φ 110 Φ 110 Φ 110
Dimension(w××d××h)
Bath (mm) 610×160×160 910×140×160 610×290×160
External (mm) 720×245×275 975×245×275 720×375×275
Heater 1,4 kW 1,8 kW 1,4 kW×2
Temp.
Range Ambient +5 ℃ to 100 ℃
Accuracy ±0,2 ℃
Uniformity ±1,0 ℃
Sensor PT100
Material
Internal Stainless Steel (#304)
External Powder Coated Steel
Stand Stainless Steel Frame
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)
Display Digital LCD Display with Back-Light Function
Timer 99hr 59min (Delay & Continuous function included)
Lid Concentric Ring Cover included
Drain Available
Safety Device Over Temp. and Over Current Protector,Sensor Error Detector, Leakage Breaker
Others
CE-CertifiedStorage Function (Temp.& Timer)
Locking Mode (Jog-Shuttle Input disabled)User Self - Compensation Function
Alarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm)
710×310×300 1.030×320×370 880×420×300
Gross Weight 18 kg 25 kg 34 kg
Power Consumption 1,4 kW 1,8 kW 2,8 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
Specification
Multi-purpose Extraction Water Bath (WEB-4) With Holding Frame
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseBath��WEB Multi-purpose Extraction Water Bath, 4- /6- /8- Placeswith Digital Fuzzy Control System, Back Light LCD, and Holding Frame, up to 100 ℃, ± 0,2 ℃
■■ Concentric Ring Cover Sets make Effective Steaming Work■■ Ideal for Gentle Extraction, Soxhlet Extraction and Determination of COD■■ Digital Fuzzy Controller Implementing Maximum Temp. Accuracy■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■ CE Certified
Application & Features� Ideal for Gentle Extraction,Soxhlet Extraction and Determination of COD.�Concentric Ring Cover Sets make Effective Steaming Work.� 4, 6, 8 Extraction Places are available.�Digital Fuzzy Controller Implementing Maximum Temp. Accuracy.�User's Self-compensation Function to Control Difference between Real Temperature and
Indicated Temperature. (±10,0 ℃)�High Quality Stainless Steel Bath and Holding Frame for Superior Durability.�Over Temperature & Over Current Protection, Sensor Error Detection and Leakage Breaking.�Digital Timer Function(99 hr 59 min) : ‘Delay Time’and ‘Operation Time’can be Controlled.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end. � Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
1.000 mm
<Continued on Next page>
www.witeg.de 19
BaBaths, Extraction
Digital Fuzzy Controller
Concentric Ring Cover Sets
Ordering Information
DH.WEB01004� Extraction Water Bath, WEB-4, 4×Places, 4×Open-Top, Φ 110 mmDH.WEB01006� Extraction Water Bath, WEB-6, 6×Places, 6×Open-Top, Φ 110 mmDH.WEB01008� Extraction Water Bath, WEB-8, 8(4×2)×Places, 8×Open-Top, Φ 110 mm
�Concentric Ring Cover Sets and Holding Frame Included
Spare AccessoriesDH.WEB11000 Concentric Ring Cover Sets, Stainless Steel,
EBC100, for all WEB modelsDH.WEB21004 Holding Frame Set, EBF100, for WEB-4,
2 ea×1 m Pole & 2 ea×700 mm PoleDH.WEB21006 Holding Frame Set, EBF200, for WEB-6
2 ea×1 m Pole & 2 ea×1.020 mm PoleDH.WEB21008 Holding Frame Set, EBF300, for WEB-8
4 ea×1 m Pole & 4 ea×740 mm Pole
Validation (IQ, OQ & PQ) ServiceDH.WEB30004 Validation Service(IQ, OQ & PQ), EBV004, for WEB-4DH.WEB30006 Validation Service(IQ, OQ & PQ), EBV006, for WEB-6DH.WEB30008 Validation Service(IQ, OQ & PQ), EBV008, for WEB-8
Back Light LCD
<Continued from...““witeg””WiseBath��WEB Multi-purpose Extraction Water Bath>
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
witeg Labortechnik GmbH20
Baths, Multi-ChamberBa
Model WMB-306 WMB-311
Dimension(w××d××h)
Bath (mm) (300×155×150)×3 Baths (300×240×150)×3 Baths
External (mm) 655×450×360 840×450×360
Capacity 6 Lit×3 Baths 11 Lit.×3 Baths
Heater 800 W×3 Baths 1 kW×3 Baths
Temp.
Range Ambient +5 ℃ to 100 ℃
Accuracy ± 0,1 ℃
Uniformity ± 1,0 ℃
Sensor PT100
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)
Display Digital LCD Display with Back-Light Function
Timer 99hr 59min (Delay & Continuous Function Included)
Safety Device Over Temp. and Over Current Protector, Sensor Error Detector, Leakage Breaker
MaterialInternal Stainless Steel (#304)
External Powder Coated Steel
Lid Stainless Steel Flat Lid included
Drain Available
Others
CE-CertifiedStorage Function (Temp.& Timer)
Locking Mode (Jog-Shuttle Input disabled)User Self - compensation function
Alarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm)
880×470×380
Gross Weight 32 kg 36 kg
Power Consumption 2,4 kW 3 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseBath��WMB Digital Multi -Chamber Water Bath, 3×6 Lit. /3×11 Lit.with 3 Chambers & 3×Stainless Steel Flat Lid, Independent Digital Fuzzy Control System, up to 100 ℃, ± 0,1℃
Specification
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Independent Digital Fuzzy Control System
Digtal Multi-Chamber Water Bath (WMB-306)
Individual Control of each Chamber
■■ Individual Control of each Chamber - Temperature and Time■■ Digital Fuzzy Controller Implementing Maximum Temp. Accuracy■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■ CE Certified
Application & Features� Ideal for Biotechnology, Clinical, Environmental, Medical, Petroleum, Pharmaceutical and
Industrial Applications.�Temp. and Time in each Chamber are Controlled independently.�Digital Fuzzy Controller Implementing Maximum Temp. Accuracy.�User's Self-Compensation Function to Control Difference between Real Temperature
and Indicated Temperature.�Stainless Steel Bath for Superior Durability & High Thermal Efficiency.�Stainless Steel Lid Prevents Evaporation and keeps Constant Temperature.�Over Temperature & Over Current Protection, Sensor Error Detection and Leakage Breaking.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end. � Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
<Continued on Next page>
www.witeg.de 21
BaBaths, Multi-Chamber
Ordering Information
DH.WMB01306� Multi-Chamber Water Bath, WMB-306, 3× 6 Lit. BathsDH.WMB01311� Multi-Chamber Water Bath, WMB-311, 3×11 Lit. Baths
�3×Stainless Steel Flat Lid Included
Spare AccessoriesDH.WB010106 Flat Lid, Stainless Steel, BF106, for 6 Lit.,
w 176×d 325 mmDH.WB010111 Flat Lid, Stainless Steel, BF111, for 11 Lit.,
w 265×d 325 mm
Optional AccessoriesDH.WB010206 Dome Lid, Stainless Steel, BD206, for 6 Lit.,
w 176×d 324×h 100 mmDH.WB010211 Dome Lid, Stainless Steel, BD211, for 11 Lit.,
w 263×d 324×h 100 mm
DH.WB020106 Rack, Test tube, 36 ea of Φ 17 mm Hole, BTH106, for 6 Lit., SUS, w 220×d 125×h 78,5 mm
DH.WB020206 Rack, Test tube, 15 ea of Φ 32 mm Hole, BTH206, for 6 Lit., SUS, w 220×d 125×h 78,5 mm
DH.WB020111 Rack, Test tube, 63 ea of Φ 17 mm Hole, BTH111, for 11 Lit., SUS, w 220×d 205×h 78,5 mm
DH.WB020211 Rack, Test tube, 25 ea of Φ 32 mm Hole, BTH211, for 11 Lit., SUS, w 220×d 205×h 78,5 mm
DH.WB030106 Lid with Concentric Ring Cover Sets 2ea, Stainless Steel, BFC106, for 6 Lit., 330×182×20 mm
DH.WB030111 Lid with Concentric Ring Cover Sets 2ea, Stainless Steel, BFC111, for 11 Lit., 329×269×20 mm
Validation (IQ, OQ & PQ) ServiceDH.WMB40106 Validation Service(IQ, OQ & PQ), MBV106, for WMB-306 DH.WMB40111 Validation Service(IQ, OQ & PQ), MBV111, for WMB-311
Dome Lid (Optional)Flat Lid (Included)
Lid with Concentric RingCover Sets for 11Lit. (BFC111)
Lid with Concentric RingCover Sets for 6Lit. (BFC106)
Test Tube Rack
<Continued from...““witeg””WiseBath��WMB Digital Multi -Chamber Water Bath>
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 222244--222277..
witeg Labortechnik GmbH22
Baths, High Temp. OilBa
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Model WHB-6 WHB-11 WHB-22
Dimension(w××d××h)
Bath (mm) 270×180×150 300×250×150 400×300×180
External (mm) 425×305×340 425×375×340 525×425×370
Capacity 6 Lit. 11 Lit. 22 Lit.
Heater 2 kW 2,5 kW 3 kW
Temp.
Range Ambient + 5 ℃ to 250 ℃
Accuracy ±1,5 ℃
Uniformity ±3,0 ℃
Sensor PT 100
Material
Internal Stainless Steel (#304)
External Powder Coated Steel
Insulation Ceramic Fiber 50 mm Thickness
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)
Display Digital LCD Display with Back-Light Function
Timer 99hr 59min (Delay & Continuous Function Included)
Lid Stainless Steel Flat Lid Included
Drain Valve Available
Safety Device Over Temp. “Cut-Off”
Others
CE-CertifiedStorage Function (Temp.& Timer)
Locking Mode (Jog-Shuttle Input disabled)User Self - compensation function
Alarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm)
470×400×500 600×490×500
Gross Weight 23 kg 25 kg 39 kg
Power Consumption 2 kW 2,5 kW 3 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
Digital High Temperature Oil Bath (WHB-11)
““witeg””WiseBath��WHB Digital High Temperature Oil Bath, 6- /11- /22- Lit.Digital Fuzzy Control System, Stainless Steel Flat Lid, Back Light LCD, up to 250 ℃, ±1,5 ℃
■■ Corrosion Resistant Stainless Steel Bath of 1,2 mm Thickness and CeramicFiber Insulator of 50 mm Thickness are used for High Temperature
■■ Digital Fuzzy Controller Implementing Maximum Temp. Accuracy■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■ CE Certified
Application & Features�Digital Fuzzy Controller Implementing Maximum Temperature Accuracy.�Digital Timer Function(99 hr 59 min) :‘Delay Time’and ‘Operation Time’can be controlled.�User's Self-Compensation Function to Control Difference between Real Temperature
and Indicated Temperature.�Corrosion Resistant Stainless Steel Bath and of 1,2 mm Thickness and Ceramic Fiber Insulator of
50 mm Thickness are used for High Temperature. �Over Temperature and Over Current Protection, Sensor Error Detection.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end. � Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Patented Jog-ShuttleControl System
Back Light LCD
Digital Fuzzy Controller
<Continued on Next page>
www.witeg.de 23
BaBaths, High Temp. Oil
Ordering InformationDH.WHB00106� High Temp. Oil Bath, WHB-6 , 6 Lit.DH.WHB00111� High Temp. Oil Bath, WHB-11, 11 Lit.DH.WHB00122� High Temp. Oil Bath, WHB-22, 22 Lit.
�1×Stainless Steel Flat Lid Included
Spare AccessoriesDH.WHB10106 Flat Lid, Stainless Steel, HBF106, for 6 Lit., w 306×d 216 mmDH.WHB10111 Flat Lid, Stainless Steel, HBF111, for 11 Lit., w 336×d 286 mmDH.WHB10122 Flat Lid, Stainless Steel, HBF122, for 22 Lit., w 436×d 336 mm
Optional AccessoriesDH.WHB20106 Dome Lid, Stainless Steel, HBD106, for 6 Lit.
w 306×d 216×h 100 mmDH.WHB20111 Dome Lid, Stainless Steel, HBD111, for 11 Lit.
w 336×d 286×h 100 mmDH.WHB20122 Dome Lid, Stainless Steel, HBD122, for 22 Lit.
w 436×d 336×h 100 mm
DH.WB020106 Rack, Test tube, 36ea of Φ 17 mm Hole, BTH106, for 6 Lit., SUS, w 220×d 125×h 78,5 mm
DH.WB020206 Rack, Test tube, 15ea of Φ 32 mm Hole, BTH206, for 6 Lit., SUS, w 220×d 125×h 78,5 mm
DH.WB020111 Rack, Test tube, 63ea of Φ 17 mm Hole, BTH111, for 11 / 22 Lit., SUS, w 220×d 205×h 78,5 mm
DH.WB020211 Rack, Test tube, 25ea of Φ32mm Hole, BTH211, for 11 / 22 Lit., SUS, w 220×d 205×h 78,5 mm
DH.WHB030122 Lid with Concentric Ring Cover Sets 4ea, Stainless Steel, HBFC122, for 22 Lit., 539×334×20 mm
Validation (IQ, OQ & PQ) ServiceDH.WHB40106 Validation Service(IQ, OQ & PQ), HBV106, for WHB-6DH.WHB40111 Validation Service(IQ, OQ & PQ), HBV111, for WHB-11DH.WHB40122 Validation Service(IQ, OQ & PQ), HBV122, for WHB-22
Dome Lid (Optional)Flat Lid (Included)
Test Tube RackLid with Concentric RingCover Sets for 22Lit.
(HBFC122)
<Continued from...““witeg””WiseBath��WHB Digital High Temperature Oil Bath>
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 222244--222277..
witeg Labortechnik GmbH24
Baths, High-Temp. Bath CirculatorsBa
Model WCH-8 WCH-12 WCH-22 WCH-30
Dimension(w××d××h)
Bath (mm) 180×320×155 250×320×155 340×440×155 340×440×200
External (mm) 440×300×450 440×370×450 560×460×450 560×460×495
Heater 0,8 kW 1,0 kW 2,0 kW 2,0 kW
Capacity 8 Lit 12 Lit. 22 Lit 30 Lit.
Temp.
Range Ambient+5 ℃ ~ 250 ℃
Accuracy ±0,1 ℃
Uniformity ±0,2 ℃
Sensor PT100
Material
Internal Stainless Steel (#304)
External Powder Coated Steel
Insulation Ceramic Fiber 50mm Thickness
Pump 15 Lit. / min (Internal / External)
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)
Display Digital LCD Display with Back-Light Function
Timer 99 hr 59 min (Delay & Continuous Function)
Safety Device Over Temp. and Over Current Protector,Sensor Error Detector
Lid Stainless Steel Flat Lid included
Nozzle i.d. 6 mm×o.d. 10 mm(i.d. 7 mm o.d.11 mm Silcon tube Connected for inner Circulation)
Drain Valve Included
Others
CE-CertifiedStorage Function (Temp.& Timer)
Locking Mode (Jog-Shuttle Input Disabled)User Self - compensation Function
Alarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm)
470×400×500 470×400×500 600×490×500 600×490×500
Gross Weight 19 kg 21 kg 23 kg 37 kg
Power Consumption 800 W 1 kW 2 kW 2 kW
Power plug type Hybrid E+F
Power Supply* AC 230 V, 50 / 60 Hz
““witeg””WiseCircu��WCH High Temperature Bath Circulator, 8- /12- /22- /30- Lit.Digital Fuzzy Control, Powerful Circulation Pump, Back Light LCD, up to 250 ℃, ±0,1 ℃
SpecificationHigh Temperature Bath Circulators
■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ Powerful Circulation Pump ensures Temp. Uniformity
: Internal and External Circulation ■■ Patented Jog-Shuttle Control System■■ CE Certified
Application & Features� Innovative Easy-to-Use Digital Fuzzy Controller.�Digital Timer Function : ‘Delay Time’and‘Operation Time’can be controlled.�Stainless Steel Bath and Lid for Superior Durability and High Thermal Efficiency.�Powerful Circulation Pump Assures Temp. Uniformity. : Internal and External Circulation. �User’s Self-Compensation Function to Control Difference between Real Temp. and Indicated Temp. �Over Temperature-/Over Current-/Low Level-Protection, Sensor Error.�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
WCH-8
WCH-12
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Flat Lid
<Continued on Next page>
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
www.witeg.de 25
BaBaths, High-Temp. Bath Circulators
Efficient Use of Bathwith Level Sensor
Innovative Digital FuzzyController
Dome Lid (Optional)
Ordering Information
Ambient +5 ℃℃~250 ℃℃ CirculatorsDH.WCH00108� High Temp. Circulator, WCH-8 , 8 Lit.DH.WCH00112� High Temp. Circulator, WCH-12, 12 Lit.DH.WCH00122� High Temp. Circulator, WCH-22, 22 Lit.DH.WCH00130� High Temp. Circulator, WCH-30, 30 Lit.
�1×Stainless Steel Flat Lid Included
Spare AccessoriesDH.WCH10108 Flat Lid, Stainless Steel, CHBF108, for 8 Lit., w 288×d 158 mmDH.WCH10112 Flat Lid, Stainless Steel, CHBF112, for 12 Lit., w 358×d 158 mmDH.WCH10122 Flat Lid, Stainless Steel, CHBF122, for 22 Lit., w 448×d 278 mmDH.WCH10130 Flat Lid, Stainless Steel, CHBF130, for 30 Lit., w 448×d 278 mm
Optional AccessoriesDH.WCH20108 Dome Lid, Stainless Steel, CHBD108, for 8 Lit.,
w 288×d 158×h 121 mmDH.WCH20112 Dome Lid, Stainless Steel, CHBD112, for 12 Lit.,
w 358×d 158×h 121 mmDH.WCH20122 Dome Lid, Stainless Steel, CHBD122, for 22 Lit.,
w 448×d 278×h 121 mmDH.WCH20130 Dome Lid, Stainless Steel, CHBD130, for 30 Lit.,
w 448×d 278×h 121 mm
Validation (IQ, OQ & PQ) ServiceDH.WCH30108 Validation Service(IQ, OQ & PQ), CHBV108, for 8 Lit. DH.WCH30112 Validation Service(IQ, OQ & PQ), CHBV112, for 12 Lit.DH.WCH30122 Validation Service(IQ, OQ & PQ), CHBV122, for 22 Lit.DH.WCH30130 Validation Service(IQ, OQ & PQ), CHBV130, for 30 Lit.
<Continued from...““witeg””WiseCircu��WCH High Temperature Bath Circulator >
witeg Labortechnik GmbH26
Baths, Refrigerated Bath CirculatorsBa
■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ RS232C Interface for Remote Monitoring and Controlling with PC■■ CFC-free (404A) Refrigeration System■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■ CE Certified
Application & Features� Ideal for Direct Immersion of Samples or External Circulating System in the field of
Biotechnology and Laboratories.� Innovative Easy-to-Use Digital Fuzzy Controller.�RS232C Interface for Remote Monitoring and Controlling with PC.�Digital Timer Function :‘Delay Time’and‘Operation Time’can be Controlled.�Stainless Steel Bath(#304) for Superior Durability & High Thermal Efficiency.�Powerful Circulation Pump ensures Temp. Uniformity : Internal and External Circulation. �Connection with Evaporator or Viscometer is applicable.�User’s Self-compensation Function to Control Difference between Real Temperature and
Indicated Temperature. (±10,0 ℃) �Warning and Auto-Stop Function in case of Liquid Shortage.�Auto-controlled Refrigeration System for Compressor Protection and Power Saving.�Over Temperature & Over Current Protection, Sensor Error & Low Level Detection, Leakage Breaking.�CFC-free (404A) Refrigeration System. �Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
Digital Precision Refrigerated Bath Circulators (WCR-P6 & WCR-P12 )
““witeg””WiseCircu��WCR Digital Precise Refrigerated Bath Circulator Digital Fuzzy Control, Back Light LCD, CFC-free Refrigeration, 6- /8- /12- /22- /30- Lit.,--20 ℃~100 ℃,±0,1 ℃
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Efficient Use of Bathwith Level Sensor
Innovative Digital FuzzyController
CFC-free (404A) Refrigeration System
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
<Continued on Next page>
Model WCR - P6 WCR - P8 WCR-P12 WCR-P22 WCR-P30
Dimension(w××d××h)
Effective Space (mm) 180×83×150 180×143×150 250×150×150 350×250×150 350×250×230
Bath (mm) 180×250×150 180×310×150 250×320×150 350×420×150 350×420×250External (mm) 262×468×630 262×468×630 372×460×750 455×545×770 455×545×845
Capacity 6 Lit. 8 Lit. 12 Lit. 22 Lit. 30 Lit.Heater 800 W 1 kW 1,5 kW 2 kW 2,2 kW
CoolingCapacity
10 ℃℃ 1,5 kW 1,5 kW 1,5 kW 2,8 kW 3,3 kW0 ℃℃ 1,2 kW 1,2 kW 1,2 kW 2,1 kW 2,6 kW
--20 ℃℃ 490 W 490 W 490 W 910 W 1,2 kWRefrigerator 245 W 245 W 245 W 552 W 643 W
Temp.
Range -20 ℃ ~ 100 ℃Accuracy ±0,1 ℃Uniformity ±0,2 ℃ at -10 ℃Sensor PT100
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99hr 59min (Delay & Continuous Function Included)
MaterialInternal Stainless Steel (#304)External Powder Coated SteelInsulation Polystyrene (20 mm)
Pump 15 Lit. / min (Internal / External)Compressor Control Intelligent Control of Refrigerator for preventing Overload of CompressorRefrigerant CFC -Free(404A) Refrigeration System
Safety Device Over Temp. and Over Current Protector,
Sensor Error and Low Level Detector, Leakage BreakerDrain IncludedLid Stainless Steel Flat Lid includedNozzle i.d. 10 mm×o.d. 12 mm(i.d. 10 mm o.d.18 mm Silcon tube Connected for inner Circulation)
Others
CE Certified, Storage Function (Temp.& Timer)Locking Mode (Jog-Shuttle Input Disabled)
User Self - Compensation FunctionAlarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm) 530×370×700 600×500×950 620×580×960 640×600×1.040
Gross Weight 50 kg 54 kg 65 kg 76 kg 83 kg
Power Consumption 1,4 kW 1,6 kW 2,1 kW 3,4 kW 3,8 kWPower plug type Hybrid E+F 3~ 16A CEE
Power Supply* AC 230 V, 50 / 60 Hz 3~, AC 230 V, 50 / 60 Hz
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
www.witeg.de 27
BaBaths, Refrigerated Bath Circulators
Ordering Information
-20 ℃℃ ~ +100 ℃℃ CirculatorsDH.WCR00206� Refrigerated Circulator, -20 ℃, WCR-P6, 6 Lit.DH.WCR00208� Refrigerated Circulator, -20 ℃, WCR-P8, 8 Lit.DH.WCR00212� Refrigerated Circulator, -20 ℃, WCR-P12, 12 Lit.DH.WCR00222� Refrigerated Circulator, -20 ℃, WCR-P22, 22 Lit.DH.WCR00230� Refrigerated Circulator, -20 ℃, WCR-P30, 30 Lit.
�1×Stainless Steel Flat Lid Included
Spare AccessoriesDH.WCR10206 Flat Lid, Stainless Steel, CRBF106, for 6 Lit., w 245×d 98 mmDH.WCR10208 Flat Lid, Stainless Steel, CRBF108, for 8 Lit., w 245×d 158 mmDH.WCR10212 Flat Lid, Stainless Steel, CRBF112, for 12 Lit., w 316×d 165 mmDH.WCR10222 Flat Lid, Stainless Steel, CRBF122, for 22 Lit. / 30Lit., w 416×d 265 mm
Optional AccessoriesDH.WCR20206 Dome Lid, Stainless Steel, CRBD106, for 6 Lit.,
w 245×d 98×h 121 mmDH.WCR20208 Dome Lid, Stainless Steel, CRBD108, for 8 Lit.,
w 245×d 158×h 121 mmDH.WCR20212 Dome Lid, Stainless Steel, CRBD112, for 12 Lit.,
w 316×d 165×h 121 mmDH.WCR20222 Dome Lid, Stainless Steel, CRBD122, for 22 Lit. / 30Lit.,
w 416×d 265×h 121 mm
Validation (IQ, OQ & PQ) ServiceDH.WCR30206 Validation Service(IQ, OQ & PQ), CRBV106, for WCR-P6DH.WCR30208 Validation Service(IQ, OQ & PQ), CRBV108, for WCR-P8DH.WCR30212 Validation Service(IQ, OQ & PQ), CRBV112, for WCR-P12DH.WCR30222 Validation Service(IQ, OQ & PQ), CRBV122, for WCR-P22DH.WCR30230 Validation Service(IQ, OQ & PQ), CRBV130, for WCR-P30
<Continued from...““witeg””WiseCircu��WCR Digital Precise Refrigerated Bath Circulator >
Dome Lid (Optional)
Flat Lid (Included)
WiseRemote�� Remote Control Software - standard delivery
Connection of Temperature Devices with Interface RS232C to a PC Export Recorded Data (Excel Spreadsheet)
Main Screen RS232C Cable & Software
witeg Labortechnik GmbH28
Baths, Ultra Low Refrigerated Bath CirculatorsBa
Specification
■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ CFC-free (404A) Refrigeration System.■■ Patented Jog-Shuttle Control System and Digital LCD Display
with Back-Light Function■■ CE Certified
Application & Features� Ideal for Direct Immersion of Samples or External Circulating System in the Field of
Biotechnology and Laboratories.� Innovative Easy-to-Use Digital Fuzzy Controller.�RS232C Interface for Remote Monitoring and Controlling with PC.�Digital Timer Function :‘Delay Time’and‘Operation Time’can be controlled.�Stainless Steel Bath(#304) for Superior Durability & High Thermal Efficiency.�Stainless Steel Lid Prevents Evaporation and keeps Constant Temperature. �Powerful Circulation Pump ensures Temp. Uniformity. : Internal and External Circulation. �Connection with Evaporator or Viscometer is applicable.�User’s Self-compensation Function to Control Difference between Real Temperature and
Indicated Temperature. (±10,0 ℃) �Warning and Auto-Stop function in case of Liquid Shortage.�Auto-controlled Refrigeration System for Compressor Protection and Power Saving.�Over Temperature & Over Current Protection, Sensor Error & Low Level Detection, Leakage Breaking.�CFC-free (404A) Refrigeration System. �Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.Ultra Low-Temperature Bath Circulators
(WCL-P12 & WCL-P30 )
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseCircu��WCL Ultra Low-Temperature Refrigerated Bath CirculatorDigital Fuzzy Control, Back Light LCD, CFC-free Refrigeration System, 6- /8- /12- /22- /30- Lit., --40 ℃~100 ℃,±0,1 ℃
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
CFC-free (404A) Refrigeration System
Efficient Use of Bathwith Level Sensor
Innovative Digital FuzzyController
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
<Continued on Next page>
Model WCL- P6 WCL- P8 WCL-P12 WCL-P22 WCL-P30
Dimension(w××d××h)
Effective Space (mm) 180×83×150 180×143×150 250×150×150 350×250×150 350×250×230
Bath (mm) 180×250×150 180×310×150 250×320×150 350×420×150 350×420×250External (mm) 372×468×750 372×468×750 372×460×750 455×545×770 455×545×845
Capacity 6 Lit. 8 Lit. 12 Lit. 22 Lit. 30 Lit.Heater 800 W 1 kW 1,5 kW 2 kW 2,2 kW
CoolingCapacity
--10℃℃ 1,2 kW 1,2 kW 1,2 kW 1,5 kW 3,3 kW--20℃℃ 770 W 770 W 770 W 930 W 2,6 kW--40℃℃ 150 W 150 W 150 W 180 W 1,2 kW
Refrigerator 276 W 276 W 368 W 552 W 643 W
Temp.
Range --40 ℃℃ ~ 100 ℃℃Accuracy ±0,1 ℃℃Uniformity ±0,2 ℃℃ at -20 ℃℃Sensor PT100
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99hr 59min (Delay & Continuous Function Included)
MaterialInternal Stainless Steel (#304)External Powder Coated SteelInsulation Polystyrene (40 mm)
Pump 15 Lit. / min (Internal / External)Compressor Control Intelligent Control of Refrigerator for preventing Overload of CompressorRefrigerant CFC -Free(404A) Refrigeration System
Safety Device Over Temp. and Over Current Protector,Sensor Error and Low Level Detector, Leakage Breaker
Drain IncludedLid Stainless Steel Flat Lid includedNozzle i.d.10 mm×o.d.12 mm(i.d. 10 mm o.d.18 mm Silcon tube Connected for inner Circulation)
Others
CE Certified, Storage Function (Temp.& Timer)Locking Mode (Jog-Shuttle Input Disabled)
User Self - compensation FunctionAlarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm) 530×370×700 600×500×950 620×580×960 640×600×1,040
Gross Weight 58 kg 62 kg 66 kg 73 kg 80 kg
Power Consumption 1,5 kW 1,7 kW 2,4 kW 3,4 kW 3,8 kWPower plug type Hybrid E+F 3~ 16A CEE
Power Supply* AC 230 V, 50 / 60 Hz 3~, AC 230 V, 50 / 60 Hz
www.witeg.de 29
BaBaths, Ultra Low Refrigerated Bath Circulators
<Continued from...““witeg””WiseCircu��WCL Ultra Low-Temperature Refrigerated Bath Circulator>
Ordering Information
-40 ℃℃~+100 ℃℃ CirculatorsDH.WCL00206� Refrigerated Circulator, -40 ℃, WCL-P6 , 6 Lit.DH.WCL00208� Refrigerated Circulator, -40 ℃, WCL-P8 , 8 Lit.DH.WCL00212� Refrigerated Circulator, -40 ℃, WCL-P12, 12 Lit.DH.WCL00222� Refrigerated Circulator, -40 ℃, WCL-P22, 22 Lit.DH.WCL00230� Refrigerated Circulator, -40 ℃, WCL-P30, 30 Lit.
�1×Stainless Steel Flat Lid Included
Spare AccessoriesDH.WCR10206 Flat Lid, Stainless Steel, CRBF106, for 6 Lit., w 245×d 98 mmDH.WCR10208 Flat Lid, Stainless Steel, CRBF108, for 8 Lit., w 245×d 158 mmDH.WCR10212 Flat Lid, Stainless Steel, CRBF112, for 12 Lit., w 316×d 165 mmDH.WCR10222 Flat Lid, Stainless Steel, CRBF122, for 22 Lit. / 30 Lit., w 416×d 265 mm
Optional AccessoriesDH.WCR20206 Dome Lid, Stainless Steel, CRBD106, for 6 Lit.,
w 245×d 98×h 121 mmDH.WCR20208 Dome Lid, Stainless Steel, CRBD108, for 8 Lit.,
w 245×d 158×h 121 mmDH.WCR20212 Dome Lid, Stainless Steel, CRBD112, for 12 Lit.,
w 316×d 165×h 121 mmDH.WCR20222 Dome Lid, Stainless Steel, CRBD122, for 22 Lit. / 30 Lit.,
w 416×d 265×h 121 mm
Validation (IQ, OQ & PQ) ServiceDH.WCL30206 Validation Service(IQ, OQ & PQ), CLBV106, for WCL-P6DH.WCL30208 Validation Service(IQ, OQ & PQ), CLBV108, for WCL-P8DH.WCL30212 Validation Service(IQ, OQ & PQ), CLBV112, for WCL-P12DH.WCL30222 Validation Service(IQ, OQ & PQ), CLBV122, for WCL-P22DH.WCL30230 Validation Service(IQ, OQ & PQ), CLBV130, for WCL-P30
Dome Lid (Optional)
Flat Lid (Included)
WiseRemote�� Remote Control Software - standard delivery
Connection of Temperature Devices with Interface RS232C to a PC Export Recorded Data (Excel Spreadsheet)
Main Screen RS232C Cable & Software
witeg Labortechnik GmbH30
Baths, Cold TrapBa
Model WCT- 40 WCT- 80
Dimension(w××d××h)
Bath (mm) 220×220×210
External (mm) 377×453×705
Capacity 10 Lit.
Type Glass Trap
Temp. Range Down to - 40 ℃ Down to - 80 ℃
Controller PID Controller
Material
Internal Stainless Steel
External Powder Coated Steel, 1,2 t, Doublepaint & Baked
Insulation Polyurethane Foam (20 mm)
Refrigerator 368 W 736 W
Refrigerant 404A
Drain Valve Available
Safety Device Over Current Protector, Sensor Error Detector, Leakage Breaker
Others CE-Certified
Packing Dimension(w××d××h) (mm) 560×500×1.010 680×640×1.130
Gross Weight 67 kg 90 kg
Power Consumption 900 W 1,8 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
Specification
Digital Precision Cold Trap Bath (WCT-40)
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseCircu��WCT Digital Precision Cold Trap Bath, --40 ℃ //--80 ℃with Glass-Trap, Digital PID Control System, CFC-free Refrigeration System, 10 Lit.
■■ Ideal for Exceptional Cooling System.■■ Digital PID Controller.■■ CFC-free (404A) Refrigeration System.■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■ CE Certified
Application & Features� Ideal for Exceptional Cooling System like Collecting Evaporation Vapor or Hazardous
Vapor from Vacuum Line.�Digital PID Controller. �Durable Stainless Steel Bath and Powder Coated Steel.�Over Current Protection, Sensor Error Detection, Leakage Breaking.�CFC-free (404A) Refrigeration System. �Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Ordering InformationDH.WCT00140 Cold Trap Bath, WCT-40, 10 Lit., -40 ℃, with Glass Cold TrapDH.WCT00180 Cold Trap Bath, WCT-80, 10 Lit., -80 ℃, with Glass Cold Trap
Spare AccessoriesDH.WCT11000 Cold Trap, CTG1000,
2 ea of DURAN� Borosilicate Glass α3,3 Safety-Pressure Resistant 1,5 bar at 250 ℃, for WCT, Φ 106×h 249 mm �Other specifications are available upon costumers request
Validation (IQ, OQ & PQ) ServiceDH.WCT20140 Validation Service(IQ, OQ & PQ), CTBV106, for WCT-40DH.WCT20180 Validation Service(IQ, OQ & PQ), CTBV108, for WCT-80
※※ RReeccoommmmeennddaattiioonn :: CCoommbbiinnaattiioonn ooff tthhee CCoolldd TTrraapp BBaatthh((WWCCTT))wwiitthh tthhee VVaaccuuuumm OOvveenn((WWOOVV)) aanndd VVaaccuuuumm PPuummpp ((RReeffeerr ttoo ppaaggee 111144~~111166))
Glass Cold Trap
PID Control System
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Glass Cold Trap(CTG1000)
www.witeg.de 31
BaBaths, Shaking
SpecificationModel WSB-18 WSB-30 WSB-45
Dimension(w××d××h)
Bath (mm) 300×300×200 500×300×200 600×380×200
External (mm) 563×353×340 763×353×340 863×433×340
Capacity 18 Lit. 30 Lit. 45 Lit.
Heater 1,4 kW 1,8 kW 2,4 kW
Max.Shaking Capacity(Elermeyer Flask) 250 ml×4 ea 250 ml×8 ea 250 ml×15 ea
Temp.
Range Ambient +5 ℃ to 100 ℃
Accuracy ±0,1 ℃
Uniformity ±0,5 ℃
Sensor PT100
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)
ShakingSpeed 20 to 250 Stroke / min
Stroke 20 mm as Factory DefaultWhen you place your order, 10, 15 and 30mm, you can choose one.
Display Digital LCD Display with Back-Light Function
Timer 99 hr 59 min (Delay & Continuous Function Included)
MaterialInternal Stainless Steel (#304)
External Powder Coated Steel
Rack Stainless Steel Spring Rack : Universal-type
Drain Included
Safety Device Over Temp. and Over Current Protector, Sensor Error Detector
Others
CE-CertifiedStorage Function (Temp.& Timer)
Locking Mode (Jog-Shuttle Input Disabled)User Self - Compensation Function
Alarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm) 620×420×450 820×420×450 920×500×450
Gross Weight 24 kg 26 kg 32 kg
Power Consumption 1,4 kW 1,8 kW 2,4 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseBath��WSB Digital Precise Shaking Water Bath, 18- /30- /45- Lit.Digital Fuzzy Control, Spring Rack, Reciprocating Motion, 20 ~ 250 rpm, to 100 ℃,± 0,1 ℃, up to 2 Lit Flask
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Digital Precise Shaking Water Bath (WSB-18)
■■Electronically Controlled Shaking Mechanism Provides QuietReciprocating Motion and Precise Speed Control.
■■Patented Shaking Mechanism : Minimum Noise and Vibration■■Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■CE Certified
Application & Features�Stainless Steel Bath for Superior Durability & High Thermal Efficiency.� Innovative Easy-to-Use Digital Fuzzy Controller.�Digital Timer Function :‘Delay Time’and‘Operation Time’can be Controlled.�Electronically Controlled Shaking Mechanism Provides Quiet Reciprocating Motion and
Precise Speed Control. �Universal Stainless Steel Spring Rack Included : for various kind of Flasks and Tubes (up to 2ℓ)�User’s Self-Compensation Function to Control Difference between Real Temperature and
Indicated Temperature. (±10,0 ℃)�Over Temperature & Over Current Protection, Sensor Error Detection.�Patented Shaking Mechanism : Minimum Noise and Vibration. �Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
Stainless SteelSpring RackStainless SteelSpring Rack
Electronically Controlled Shaking Mechanism
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
<Continued on Next page>
witeg Labortechnik GmbH32
Baths, ShakingBa
Spring Rack (Standard Delivery)
Ordering InformationDH.WSB01018� Shaking Water Bath, WSB-18, 20~250 rpm, 100 ℃, 18 Lit. DH.WSB01030� Shaking Water Bath, WSB-30, 20~250 rpm, 100 ℃, 30 Lit. DH.WSB01045� Shaking Water Bath, WSB-45, 20~250 rpm, 100 ℃, 45 Lit.
�1×Stainless steel Spring Rack Included
Spare AccessoriesDH.WSB51018 Universal Spring Rack, SBR018, for 18 Lit., w 245×d 270×h 110 mm DH.WSB51030 Universal Spring Rack, SBR030, for 30 Lit., w 445×d 270×h 110 mm DH.WSB51045 Universal Spring Rack, SBR045, for 45 Lit., w 545×d 350×h 110 mm
Optional AccessoriesDH.WSB02018 Dome Lid, Stainless Steel, SBD018, for 18 Lit.
w 363×d 353×h 69 mm DH.WSB02030 Dome Lid, Stainless Steel, SBD030, for 30 Lit.
w 563×d 353×h 69 mmDH.WSB02045 Dome Lid, Stainless Steel, SBD045, for 45 Lit.
w 663×d 433×h 69 mm
Validation (IQ, OQ & PQ) ServiceDH.WSB31018 Validation Service(IQ, OQ & PQ), SBV018, for 18 Lit.DH.WSB31030 Validation Service(IQ, OQ & PQ), SBV030, for 30 Lit.DH.WSB31045 Validation Service(IQ, OQ & PQ), SBV045, for 45 Lit.
<Continued from...““witeg””WiseBath��WSB Digital Precise Shaking Water Bath >
Dome Lid (Optional)
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3344,, 229944,, 229955,, 229988,, 229999,, 330088..
www.witeg.de 33
BaBaths, Viscosity
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Model WVB-30 WVB-52
Dimension(w××d××h)
Bath (mm) 350×300×300 500×300×350
External (mm) 585×375×420 730×380×470
Capacity 30 Lit 52 Lit.
Heater 2 kW 3 kW
Temp.
Range Ambient +5 ℃ to 100 ℃
Accuracy ±0,1 ℃
Uniformity ±0,2 ℃
Sensor PT100
Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)
Display Digital LCD Display with Back-Light Function
Pump Magnetic Drive, Max. Flow 30 Lit. / min
Material
Internal Stainless Steel (#304)
External Powder Coated Steel
Window Vacuum Sealed and Tempered Safety Pair Glasses
Timer 99 hr 59 min (Delay & Continuous Function Included)
Safety Device Over Temp. and Over Current Protector, Sensor Error Detector
Drain Included
Viewing Window Size(mm) 230×180
Others
CE-CertifiedStorage Function (Temp.& Timer)
Locking Mode (Jog-Shuttle Input Disabled)User Self - Compensation Function
Alarm (Error Status and Timer -end)
Packing Dimension(w××d××h) (mm) 640×450×500 800×450×550
Gross Weight 24 kg 28 kg
Power Consumption 2 kW 3 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
Specification
■■ Used for Precise Measurement with Capillary Viscometers■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ Powerful Circulation Pump ensures Highest Uniformity of Temperature■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function.■■ CE Certified
Application & Features�Powerful Circulation Pump (30 Lit. / min) ensures Highest Uniformity of Temperature in the Bath.�Used for Precise Measurement with Capillary Viscometers.�Stainless Steel(#304) made inner bath.� Innovative Easy-to-Use Digital Fuzzy Controller. �Stainless Steel Lid Contains Five Holes for Insertion of Viscometer Holders. �Digital Timer Function : ‘Delay Time’ and ‘Operation Time’ can be Controlled.�User’s Self-compensation Function to Control Difference between Real Temperature and
Indicated Temperature.�Over Temperature & Over Current Protection, Sensor Error Detection.�Storage Function for the Set Values of Temperature and Time.�Alarm Function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
Digital Precise Viscosity Bath (WVB-30)
““witeg””WiseBath��WVB Digital Precise Viscosity Bath, 30- & 52-Lit.with Transparent Window, Stainless Steel Lid for Viscometer Holder, Digital Fuzzy Control System, up to 100 ℃, ± 0.1 ℃
Digital Fuzzy Controller
Transparent Window
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Viscometer HolderPatented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
<Continued on Next page>
witeg Labortechnik GmbH34
Baths, ViscosityBa
Stainless Steel Lid has 5 Holes for Insertion of Viscometer Holders
(WVB-30, 30Lit.)
Ordering Information
DH.WVB01030 Viscosity Bath, WVB-30, 30 Lit.DH.WVB01052 Viscosity Bath, WVB-52, 52 Lit.
�1×Stainless Steel Lid for Viscometer Holder Included
Spare AccessoriesDH.WVB11030 Flat Lid, for Viscometer Holder, Stainless Steel, VBF030,
for 30 Lit., w 380×d 330, Φ 50 mm 5 HolesDH.WVB11052 Flat Lid, for Viscometer Holder, Stainless Steel, VBF052,
for 52 Lit., w 530×d 330, Φ 50 mm 9 Holes
Optional AccessoryDH.WVB02010 Viscometer Holder, WVB02010
Validation (IQ, OQ & PQ) ServiceDH.WVB31030 Validation Service(IQ, OQ & PQ), VBV030, for WVB-30 DH.WVB31052 Validation Service(IQ, OQ & PQ), VBV052, for WVB-52
Viscometer Holder
<Continued from...““witeg””WiseBath��WVB Digital Precise Viscosity Bath>
Viscometer Holder
www.witeg.de 35
CeCentrifuges, Micro
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Ordering InformationDH.WCF00010� Microcentrifuge, CF-10 Set, Max.13.500 rpm,
including Rotor CFAR1512, 230VDH.WCF00011� Microcentrifuge, CF-10 Set, Max.13.500 rpm,
including Rotor CFAR1512, 110V�12 ea×0,2 ml Tube Adapters and 12 ea×0,5 ml Tube Adapters are included
Spare AccessoryDH.WCF00100 Fixed Angle Rotor, CFAR1512, 12×1,5 / 2,0 ml TubesDH.WCF00200 0,2 ml Tube Adapter-sets, 12 ea Adapter / 1 set, CFTA1 for CF-10DH.WCF00300 0,5 ml Tube Adapter-sets, 12 ea Adapter / 1 set, CFTA2 for CF-10
■■ Unbelievably Quiet Operation - Brushless DC motor ■■ High Performance - Digital Feedback Speed Control,
Max. 13.500 rpm, 12.225××g■■ Useful Exclusive Spin Down Button■■ 0,2 ml (0,5 ml) PCR Tube Adapter (12 ea), Angle Rotor CFAR1512
(1,5 / 2,0 ml××12 Tubes)■■ Patented Jog-Shuttle Control System and Digital LCD with Back-Light Function■■ CE Certified
Application & Features�Unbelievably Quiet Operation - Brushless DC motor. �Unnecessary Rotor Lid for Running and Reduced Noise. (≤57dB at Max. RPM)�High Performance - Digital Feedback Speed Control, Max. 13.500 rpm, 12.225×g.�Realize Extremely Compact Design, with Exceptionally Small Footprint. �Acceleration and Braking Times Lower than 15 sec. (for Max. Speed)�Digital Timer Function with Continuous Running Mode. (99 min 59 sec)�Storage Function for the Set Values : RPM & Time.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be disabled)�Safety System for Motor Error. �Electric Door Lock Function Safety.�Safety Electronic Lid Lock System : Opening the Lid is impossible during Operation.�Simple Operation for Repetitive use of ‘Spin Down’ Function.�Angle Rotor CFAR1512. (1,5 / 2,0 ml×12 Tubes) �Using Adapters Accommodates 0,2 ml or 0,5 ml PCR Tubes.�Patented Jog-Shuttle Control System and Digital LCD with Back-Light Function.�CE Certified.
SpecificationModel CF-10
Operating RPM 1.000~13.500 RPM
Max. RCF 12.225×gMax. Capacity 1,5 ml (2,0 ml)×12 TubesControl Digital Feedback Control with Jog Shuttle Switch (Turn+Push)
Display Digital Back-Light LCD
Timer 99 min. 59 sec. (Continuous Mode Available)
Cooling Device Air CoolingDrive System Brushless DC motor, Direct drive
Acceleration Time ≤≤15 sec (at Max. speed)Braking Time ≤≤15 sec (at Max. speed)
Safety System Motor Error Detector, Auto Stop when Opening DoorElectronic Safety Lid Lock System
Noise Level ≤≤57 dB
Dimension (w××d××××h) (mm) 170×226×183Weight 2,3 kg
Others CE Certified
Packing Dimension(w××d××h) (mm)
290×240×220
Gross Weight 5 kg
Power Consumption 90 W
Power plug type Hybrid E+FPower Supply* AC 230 V, 50 / 60 Hz
““witeg””WiseSpin��CF-10 High-Performance Microcentrifuge Set, 12×0,2 / 0,5 /1,5 / 2,0 ml TubesCompact, Unbelievably Quiet, Safety System, Easy-to-Use Fixed-Angle Rotor Included, Max. 13.500 rpm, 12.250×g
High-PerformanceExtremely Compact
Unbelievably Quiet OperationHigh-Performance Microcentrifuge
High Performance Microcentrifuge (CF-10)with 12××1,5 / 2,0mmll Tubes Fixed-Angle Rotor (CFAR1512)
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Digital BackLight LCD
■■Fixed-Angle Rotor CFAR1512■■Unnecessary Rotor Lid for Running■■12××1,5 / 2,0ml Tubes
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee oonn ppaaggee :: 337722..
●● UV Transilluminators●● Portable Gel Documentation System●● Unified Gel Documentation System
For Gel Documentation and Analysis, you can find WiseDoc��
Range is the Best Choice Based on it`s Cost-effective, FlexibleConfiguration and High Specification.The Compact 1,5M Pixel Camera, Safe Darkroom and Built-in Transilluminator Implement an Innovation in DNA Imaging Labs.You can use the System with PC Through USB Interface.
WGD-20
WGD-30
WUV-L50
▶▶Portable Gel Documentation System
▶▶Unified Gel Documentation System
▶UV Transilluminator
WiseDoc��& WiseUv��
Gel DocumentationSystemGel DocumentationSystem
36
www.witeg.de 37
ElElectrophoresis, Transilluminators
Model WUV-L10 WUV-L20 WUV-L50 WUV-M10 WUV-M20
Filter Size (mm) 200×200
Wave Length(nm)
Single365
Single312
Dual365+312
Single365
Single312
UV Lamps 15 W×6 ea (90 W) 8 W×6 ea (48 W)
Dimension(w××d××h) (mm)
495×330×95 350×275×95
Weight 10 kg 8 kg
Others CE Certified
Packing Dimension(w××d××××h) (mm) 520×380×220 380×320×220
Gross Weight 12 kg 10 kg
Power Consumption 90 W 48 W
Power plug type Hybrid E+F
Power AC 230 V, 50 / 60 Hz
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseUv��WUV UV Transilluminators, Standard - and Compact-Case ModelsEconomical, Robust, Versatile, Hinged UV-Blocking Safety Cover, 20×20 cm Filter, 48 W / 90 W, 312 nm /365 nm /312+365 nm
■■ Low Cost, Robust, Versatile, Affordable & Gentle Excitation■■ Hinged UV-Blocking Safety Cover Protects User from UV Radiation■■ Stainless-Steel Frame and Robust Steel Housing■■ Increased UV Intensity and Homogeneity■■ CE Certified
Application & Features� Low Cost, Robust, Versatile, Affordable & Gentle Excitation.�Hinged UV-Blocking Safety Cover Protects User from UV Radiation.� Long-Life Electronic. (Low Heat, no Flickering)�Stainless-Steel Frame and Robust Steel Housing.� Increased UV Intensity and Homogeneity. �Used for Standard Gel Documentation and Preparative Work.� Ideal for Detecting Very Small Amount of DNA & RNA Stained by EtBr.�High (100 %) / Low (75 %) Intensity Switch.�CE Certified.
Specification
Ordering InformationStandard Case ModelDH.WUV00010 Transilluminator, WUV-L10, 20×20 cm Filter, 365 nm, 15 W×6 eaDH.WUV00020 Transilluminator, WUV-L20, 20×20 cm Filter, 312 nm, 15 W×6 eaDH.WUV00050 Transilluminator, WUV-L50, 20×20 cm Filter, 365 nm+312 nm, 15 W×6 ea
Mini Case ModelDH.WUV00110 Transilluminator, WUV- M10, 20×20 cm Filter, 365 nm, 8 W×6 eaDH.WUV00120 Transilluminator, WUV- M20, 20×20 cm Filter, 312 nm, 8 W×6 ea
Spare AccessoriesDH.WUV01010 UV Lamp, UVL365, for WUV-L10/-L50, 365 nm, 15 WDH.WUV01020 UV Lamp, UVL312, for WUV-L20/-L50, 312 nm, 15 W
DH.WUV01110 UV Lamp, UVM365 for WUV-M10, 365 nm, 8 WDH.WUV02110 UV Lamp, UVM312 for WUV-M20, 312 nm, 8 W
Transilluminator, Standard Type (WUV-L50)
Transilluminator, Mini Type (WUV-M20)
UV Filter
UV Filter
witeg Labortechnik GmbH38
Electrophoresis, Gel Documentation SystemsEl
<Continued on Next page>
Model WGD-20
CCDModule
Image Area Size 1 / 2 � CCD
Max. Resolution 1.360×1.024
Pixel Size 4,65×4,65 um
Lens Mount C mount
Power Supplied USB
Optical Size 7,6×6,2 mm
Connect to PC USB 2,0
ManualZoomLens
Iris F1.0 - Close
Focal Length 8~48mm
Operation Temp. - 10 ℃ to + 50 ℃
Overall
Dimension(w××d××h) (mm)
260×260×430
Weigth 9 kg
Software Capability Windows XP, Vista & 7
Packing Dimension(w××d××h) (mm) 400×350×510
Others CE Certified
Gross Weight 18 kg
Power Supply* USB Only
““witeg””WiseDoc��WGD-20 Portable Gel Documentation System, 1.5M PixelCompact & Cost-Effective System, Real-Time Image through USB Interface, WiseCaptureⅡⅡTM Capture Software, Portable Darkroom Hood with Digital CCD Camera & Optical Lens, TotalLabTM DNA Analysis Software
Portable Gel Documentation System (WGD-20)
Digital CCD Camera
Optical Lens
DarkroomHood
■■ The Most Cost-Effective System in the Market■■ High Precise and Large Caliber Optical Lens with Zoom,
Focus and Iris Control are Used■■ CE Certified
Application & Features� The Most Cost-Effective System in the Market.�Digital CCD Camera (Resolution 1.5 Million pixel) with Portable Darkroom is Offered.� 1.360×1.024, 10-bit CCD, Avilable for 8-bit Gray Level Image Capturing.�External Dimension : 260×260×430 mm�Weight : 9 kg�Power Consumption : N/A �Very Compact Portable Darkroom System Enables the Existing Transilluminators in the Lab to be
used together with. High Flexibility in use is Offered.�High-Precision and Large Caliber Optical Lens with Zoom, Focus and Iris Control is used.�USB 2,0 Interface is Available, through which Real-Time Images are Transferred Directly to PC. �WiseCaptureⅡTM Software : Easy and Fast Capture of Gel Image.�TotalLabTM Software : Fully Automatic, Single Button Press Complete Image Analysis
within Area of Interest. (Optional)�CE Certified.
WiseCaptureⅡTM :: Real-Time Image Viewing, Capture, Manipulate and Save Images
※ Computer System Reqirements
- Intel Chipset, USB 2,0 Support Mainboard- Over Pentium 4 Processor- Over 256 MB Main Memory- Over 60 MB Space of HDD for Installation and Running- Windows XP and Vista OS
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Specification
www.witeg.de 39
ElElectrophoresis, Gel Documentation Systems
TotalLabTM Quant■Automatic and Manual Lane Detection
Background SubtractionFully Automatic Band DetectionMolecular Size / pI CalibrationQuantity CalibrationNormalization
Phoretix 1D (additional function)■Band Matching, Band Picking, Dendrograms
Intensity Calibration
Phoretix 1D Pro (additional function)■Match Band Data Patterns across Large Groups of Lanes
Choice of Algorithms to Generate Dendrograms: NeighborJoining, UPGMA, Complete Linkage, Single Linkage, WardLibrary, Queries Function
TotalLabTM Software
Lane & BandOne Stop Analysis
Band Pattern AnalysisBand Matching
Ordering Information
DH.WGD00020 Gel Doc. System, WGD-20, with a Camera, Portable Darkroom Hood and WiseCaptureⅡTM
DH.WGD00024 Gel Doc. System, WGD-20S, with a Camera, Portable Darkroom Hood,TotalLabTM Quant, DNA Analysis S/W and WiseCaptureⅡTM
Spare & Optional AccessoriesDH.WUV00020 Transilluminator, WUV-L20, 20×20 cm Filter, 312 nm, 15 W×6 eaDH.WUV00050 Transilluminator, WUV-L50, 20×20 cm Filter, 365 nm+312 nm, 15 W×6 ea DH.WUV00120 Transilluminator, WUV- M20, 20×20 cm Filter, 312 nm, 8 W×6 ea
DH.WGD00100 TotalLabTM Quant, DNA Analysis S/WDH.WGD00120 Phoretix 1D, DNA Analysis S/WDH.WGD00121 Phoretix 1D Pro, DNA Analysis S/WDH.WGD00200 LapTop Computer for WGD Gel Doc.System, WGD-Laptop
<Continued from...““witeg””WiseDoc��WGD-20 Portable Gel Documentation System >
Model WGD-30
CCDModule
Image Area Size 1 / 2 � CCD
Max. Resolution 1.360×1.024
Pixel Size 4,65×4,65 um
Lens Mount C mount
Power Supplied USB
Optical Size 7,6×6,2 mm
Connect to PC USB 2,0
ManualZoomLens
Iris F1,0 - Close
Focal Length 8~48 mm
Operation Temp. -10 ℃ to +50 ℃
Transilluminater
Filter Size 200×200 mm
Wave Length Single 312 um
UV Lamps 8 W×6 ea
Overall
DaylightFluorescent Lamps 7 W×2 ea
Dimension (w××d××h) (mm) 395×393×676,5
Weigth 19 kg
Power AC 110V, 60 Hz or 220 V, 50 / 60 Hz
Power Consumption 65 W
Software Capability Windows XP, Vista & 7
Others CE Certified
Packing Dimension(w××d××h) (mm) 440×440×750
Gross Weight 23 kg
witeg Labortechnik GmbH40
Electrophoresis, Gel Documentation SystemsEl
<Continued on Next page>
““witeg””WiseDoc��WGD-30 Unified Gel Documentation System, 1,5M PixelComplete System, Real-Time Image through USB Interface, WiseCaptureⅡⅡTM Capture Software, Unified Darkroom System in-Built Sliding Transilluminator with Digital CCD Camera &Optical Lens, TotalLabTM DNA Analysis Software
Unified Gel Documentation System (WGD-30)
Digital CCD Camera
■■ Complete System with Digital CCD Camera, Safety Darkroom Hood and in-built Transilluminator is Offered
■■ High-Quality Optical Lens with Zoom, Focus and Iris Control is Used■■ CE Certified
Application & Features�Complete System with a Digital CCD Camera, Safety Darkroom Hood and in-built
Transilluminator is Offered. �Unified Darkroom System with in-built Sliding Transilluminator offers very High Safety in use.�Transilluminator: 312 nm, 8 W×6 UV lamps. (WUV-M20)� External Dimension : 395×393×676,5 mm� Internal Dimension : 350×275×400 mm�Door Size : 343×257 �Weight : 19 kg�White Light : 2 ×Fluorescent lamp. �Power Consumption : 60 W�Digital CCD Camera. (Resolution 1.5 Million pixel)� 1.360×1.024, 10-bit CCD, Avilable for 8-bit Gray Level Image Capturing.�High-Quality Optical Lens with Zoom, Focus and Iris Control (Manual Adjust) is used.�USB 2.0 Interface is available, through which Real-time Images are Transferred Directly to PC. �WiseCaptureⅡTM Software : Easy and Fast Capture of Gel Image. (Included)� TotalLabTM Software : Fully Automatic, Single Button Press Complete Image Analysis
within Area of Interest.�CE Certified.
WiseCaptureⅡTM :: Real-Time Image Viewing, Capture, Manipulate and Save Images
※ Computer System Reqirements
- Intel Chipset, USB 2.0 Support Mainboard- Over Pentium 4 Processor- Over 256MB Main Memory- Over 60MB Space of HDD for Installation and Running- Windows XP and Vista OS
Transilluminator 312nm, 8W××6 UV lamps
Optical Lens
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Specification
www.witeg.de 41
ElElectrophoresis, Gel Documentation Systems
Ordering Information
DH.WGD00030 Gel Doc. System, WGD-30, with a Camera (1,5M Pixel), Darkroom Hood, in-built WUV-M20 Transilluminator and WiseCaptureⅡTM
DH.WGD00034 Gel Doc. System, WGD-30S, with a Camera (1,5M Pixel), Darkroom Hood,in-built WUV-M20 Transilluminator, WiseCaptureⅡTM andTotalLabTM Quant DNA Analysis S/W
Spare & Optional AccessoriesDH.WGD00100 TotalLabTM Quant, DNA Analysis S/WDH.WGD00120 Phoretix 1D, DNA Analysis S/WDH.WGD00121 Phoretix 1D Pro, DNA Analysis S/WDH.WGD00200 LapTop Computer, for WGD Gel Doc.System
DH.WUV01110 UV Lamp, UVM365 for WUV-M10, 365 nm, 8 WDH.WUV02110 UV Lamp, UVM312 for WUV-M20, 312 nm, 8 W
WGD-20 / 30 Lens System
USB Interface
A standard High-Throughput PC Interface Enables High-SpeedTransfer of Real-Time Images from CCD Camera.(NOTE) Only the USB version 2,0 is Supported.
WGD-20/-30 Lens
Iris ControlExcellent Bright Zoom Lens (F 1,0 - Close)
Zoom ControlWide Range & Easy to Control Focal Length Availble on about 8 - 16mm
Focus ControlHigh Precision Large Caliber Zoom Lens
<Continued from...““witeg””WiseDoc��WGD-30 Unified Gel Documentation System >
●● Digital Muffle Furnaces●● Programmable Digital Muffle Furnaces
▶▶ Digital Muffle Furnace 1.000℃ / 1.200℃
▶▶ Programmable Muffle Furnace1.000℃ / 1.200℃
WiseTherm��
FurnacesFurnaces
42
FP-14
F-14
www.witeg.de 43
FuFurnaces
Specification
““witeg””WiseTherm��F/FH High Performance Digital Muffle Furnaces, 1.000 ℃/1.200 ℃with Patented PID Jog-Shuttle Control System, BackLightLCD, Short Heat-up Time, Ceramic Fiber with Heating Wire, 4-Side Heating, 3~14, 27, 63 Lit.
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””Ordering Information3~14 Lit. / 1.000 ℃ Standard Furnace DH.WF11.03 Furnace, F-03, 1.000 ℃, 3 Lit.DH.WF11.05 Furnace, F-05, 1.000 ℃, 4,5 Lit.DH.WF11.12 Furnace, F-12, 1.000 ℃, 12 Lit.DH.WF11.14 Furnace, F-14, 1.000 ℃, 14 Lit.
27& 63 Lit. / 1.000 ℃, Large Volume FurnaceDH.WF11.27 Furnace, large volume, F-27, 1.000 ℃, 27 Lit.DH.WF11.63 Furnace, large volume, F-63, 1.000 ℃, 63 Lit.
3~14 Lit. / 1.200 ℃, Standard Furnace DH.WFH12.03 Furnace, FH-03, 1.200 ℃, 3 Lit.DH.WFH12.05 Furnace, FH-05, 1.200 ℃, 4,5 Lit.DH.WFH12.12 Furnace, FH-12, 1.200 ℃, 12 Lit.DH.WFH12.14 Furnace, FH-14, 1.200 ℃, 14 Lit.
27& 63 Lit. / 1.200 ℃, Large Volume FurnaceDH.WFH12.27 Furnace, Large Volume, FH-27, 1.200 ℃, 27 Lit.DH.WFH12.63 Furnace, Large Volume, FH-63, 1.200 ℃, 63 Lit.
Validation (IQ, OQ & PQ) ServiceDH.WF311.03 Validation Service(IQ, OQ & PQ), FV1103, for F-03 DH.WF311.05 Validation Service(IQ, OQ & PQ), FV1105, for F-05 DH.WF311.12 Validation Service(IQ, OQ & PQ), FV1112, for F-12 DH.WF311.14 Validation Service(IQ, OQ & PQ), FV1114, for F-14 DH.WF311.27 Validation Service(IQ, OQ & PQ), FV1127, for F-27DH.WF311.63 Validation Service(IQ, OQ & PQ), FV1163, for F-63 DH.WFH312.03 Validation Service(IQ, OQ & PQ), FHV1203, for FH-03 DH.WFH312.05 Validation Service(IQ, OQ & PQ), FHV1205, for FH-05 DH.WFH312.12 Validation Service(IQ, OQ & PQ), FHV1212, for FH-12DH.WFH312.14 Validation Service(IQ, OQ & PQ), FHV1214, for FH-14DH.WFH312.27 Validation Service(IQ, OQ & PQ), FHV1227, for FH-27DH.WFH312.63 Validation Service(IQ, OQ & PQ), FHV1263, for FH-63
Digital Muffle Furnace (F-14)
■■ Ceramic Fiber embeded Heating Wire, 4-Side Heating■■ Digital PID Controller ■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function ■■ CE Certified
Application & Features�Designed for Ash-Determinations, Enameling, Fusions, Ignitions, and Precipitate Drying.�Digital PID Controller. �Ceramic Fiber embeded Heating Wire, 4-Side Heating.�Ceramic Plate is Provided. (FH-model only) �Short Heating-Up Time.�Over Temperature & Over Current Protection, Sensor Error Detection� Low Weight and High Grade Insulation. �High Quality / Low Price. �CE Certified. �Digital Timer Function : 99 hr 59 min�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.
Model F-03 F-05 F-12 F-14 F-27 F-63Temp. Range Max. 1.000 ℃
Model FH-03 FH-05 FH-12 FH-14 FH-27 FH-63Temp. Range Max. 1.200 ℃Dimension(w××d××h)
Internal (cm) 13×25×9 15×30×10 20×30×20 25×35×16 30×30×30 40×40×40External (cm) 39×48×53 42×53×55 48×55×66 53×58×62 58×59×76 63×71×79
Capacity 3 Lit. 4,5 Lit. 12 Lit. 14 Lit. 27 Lit. 63 Lit.Required time to be reached 800℃℃ 16 min 20 min 23 min
Temp.Internal Ceramic Fiber with Heating WireExternal Powder Coated SteelInsulation Ceramic Fiber
Controller Digital PID Controller with Jog-Shuttle Switch (Turn+Push) Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)Thermocouple K-typeHeater (Kantal A1) Ceramic Fiber with Heating Wire, 4-Side HeatingSafety Device Over Temp. and Over Current Protector, Sensor Error DetectorOthers CE CertifiedPower Consumption 1,4 kW 1,8 kW 3,6 kW 4,0 kW 4,6 kW 9 kWPower plug type Hybrid E+F 3~ 16A CEEPower Supply� AC 230 V, 50 / 60 HzPacking Dimension(w××d××h) (cm) 62×53×74 68×58×76 67×62×90 72×68×84 74×74×105 116×90×110
Weight 35 kg 38 kg 47 kg 56 kg 62 kg 80 kgGross Weight 54 kg 62 kg 82 kg 88 kg 104 kg 225 kg
for Inner Chamber of FH-ModelCeramic Fiber with Heating Wire
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Short Heat-up Time
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
witeg Labortechnik GmbH44
FurnacesFu
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
■■ Digital PID Programmable Controller : 3 Patterns with 16 Segments■■ CE Certified
Application & Features�Designed for Ash-Determinations, Enameling, Fusions, Ignitions, and Precipitate Drying.�PID Programmable Controller : 3 Patterns with 16 Segments.�Short Heating-Up Time.�Programmable Timer : 99 hr 59 min �Resolution : 1 ℃, 1 min�Ceramic Fiber embeded Heating Wire, 4-Side Heating.�Ceramic Plate is Provided. (FHP-model only)�Over Temperature & Over Current Protection, Sensor Error Detection.� Low Weight and High Grade Insulation. �High Quality / Low Price. �CE Certified.
““witeg””WiseTherm��FP/FHP Programmable Digital Muffle Furnaces, 1.000 ℃/1.200 ℃Digital PID Programmable Controller, Short Heat-up Time, Ceramic Fiber with Heating Wire, 4-Side Heating, 3~14, 27-/63- Lit.
Programmable Digital Muffle Furnace (FP-14)
Digital PID Controller: 3 Patterns with 16 Segments
inner chamber of FHP-modelCeramic Fiber with Heating Wire
Model FP-03 FP-05 FP-12 FP-14 FP-27 FP-63
Temp. Range Max. 1.000 ℃Model FHP-03 FHP-05 FHP-12 FHP-14 FHP-27 FHP-63
Temp. Range Max. 1.200 ℃Dimension(w××d××h)
Internal (cm) 13×25×9 15×30×10 20×30×20 25×35×16 30×30×30 40×40×40External (cm) 39×48×53 42×53×55 48×55×66 53×58×62 58×59×76 63×71×79
Capacity 3 Lit. 4,5 Lit. 12 Lit. 14 Lit. 27 Lit. 63 Lit.Required time to be reached 800℃℃ 16 min 20 min 23 min
MaterialInternal Ceramic Fiber with Heating WireExternal Powder Coated SteelInsulation Ceramic Fiber
Controller Programmable PID Controller : 3 Patterns 16 SegmentsDisplay LEDThermocouple K-typeHeater (Kantal A1) Ceramic Fiber with Heating Wire, 4-Side HeatingSafety Device Over Temp. and Over Current Protector, Sensor Error DetectorOthers CE CertifiedPower Consumption 1,4 kW 1,8 kW 3,6 kW 4.0 kW 4.6 kW 9 kWPower plug type Hybrid E+F 3~ 16A CEEPower Supply� AC 230 V, 50 / 60 HzPacking Dimension(w××d××h) (cm) 62×53×74 68×58×76 67×62×90 72×68×84 74×74×105 116×90×110
Weight 35 kg 38 kg 47 kg 56 kg 62 kg 80 kg
Gross Weight 54 kg 62 kg 82 kg 88 kg 104 kg 225 kg
Short Heat-up Time
Ordering Information3~14 Lit., / 1.000 ℃, Standard Programmable FurnaceDH.WF11.P03 Furnace, Programmable, FP-03, 1.000 ℃, 3 Lit.DH.WF11.P05 Furnace, Programmable, FP-05, 1.000 ℃, 4,5 Lit.DH.WF11.P12 Furnace, Programmable, FP-12, 1.000 ℃, 12 Lit.DH.WF11.P14 Furnace, Programmable, FP-14, 1.000 ℃, 14 Lit.
27 & 63 Lit., / 1.000 ℃, Large Volume Programmable FurnaceDH.WF11.P27 Furnace, Programmable, Large Volume, FP-27, 1.000 ℃, 27 Lit.DH.WF11.P63 Furnace, Programmable, Large Volume, FP-63, 1.000 ℃, 63 Lit.
3~14 Lit. / 1.200 ℃, Standard Programmable FurnaceDH.WFH12.P03 Furnace, Programmable, FHP-03, 1.200 ℃, 3 Lit.DH.WFH12.P05 Furnace, Programmable, FHP-05, 1.200 ℃, 4,5 Lit.DH.WFH12.P12 Furnace, Programmable, FHP-12, 1.200 ℃, 12 Lit.DH.WFH12.P14 Furnace, Programmable, FHP-14, 1.200 ℃, 14 Lit.
27 & 63 Lit. / 1.200 ℃, Large Volume Programmable FurnaceDH.WFH12.P27 Furnace, Programmable, Large Volume, FHP-27, 1.200 ℃, 27 Lit.DH.WFH12.P63 Furnace, Programmable, Large Volume, FHP-63, 1.200 ℃, 63 Lit.
Validation (IQ, OQ & PQ) ServiceDH.WF311.P03 Validation Service(IQ, OQ & PQ), FPV1103, for FP-03 DH.WF311.P05 Validation Service(IQ, OQ & PQ), FPV1105, for FP-05 DH.WF311.P12 Validation Service(IQ, OQ & PQ), FPV1112, for FP-12 DH.WF311.P14 Validation Service(IQ, OQ & PQ), FPV1114, for FP-14 DH.WF311.P27 Validation Service(IQ, OQ & PQ), FPV1127, for FP-27DH.WF311.P63 Validation Service(IQ, OQ & PQ), FPV1163, for FP-63 DH.WFH312.P03 Validation Service(IQ, OQ & PQ), FHPV1203, for FHP-03 DH.WFH312.P05 Validation Service(IQ, OQ & PQ), FHPV1205, for FHP-05 DH.WFH312.P12 Validation Service(IQ, OQ & PQ), FHPV1212, for FHP-12 DH.WFH312.P14 Validation Service(IQ, OQ & PQ), FHPV1214, for FHP-14 DH.WFH312.P27 Validation Service(IQ, OQ & PQ), FHPV1227, for FHP-27DH.WFH312.P63 Validation Service(IQ, OQ & PQ), FHPV1263, for FHP-63
●● High Performance Dry Bath - Heating ●● High Performance Dry Bath - Heating & Cooling
- Designed for Multi-functional Dry Bath.- Ideal for Enzyme Reactions, Inactivation of Sera, Incubation, and Other Laboratory Procedures.
- Precise Temperature Control : ±0,2 ℃ Accuracy.
HB-48-Set
HB-R48-Set
HB-96-Set-Double Size
HB-96D-Set-Dual type
▶▶Dry Bath - Heating
▶▶Dry Bath - Heating & Cooling
WiseTherm��
Dry BathDry Bath
45www.witeg.de
witeg Labortechnik GmbH46
Heating, Block/Dry BathHe
■■ Designed for Multi-functional Dry Bath ■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■ CE Certified
Application & Features�Designed for Multi-functional Dry Bath. �Modular Block.� Ideal for Enzyme Reactions, Inactivation of Sera, Incubation and Other Laboratory Procedures.� Precise Temperature Control : Ambient +5 ℃ ~ 150 ℃ with ±0,2 ℃ Accuracy.� User’s Self-Compensation Function for Temperature. (±10,0 ℃) �Over Temperature & Over Current Protection and Sensor Error Detection.� Digital Timer Included : up to 99 hr 59 min. (Operation Time + Delay Time)� Storage function for the Set Values of Temperature and Timer.� Alarm Function : Error Status and Timer-end. � Various kind of Blocks are offered. (Optional)� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)� The Block Extraction Tongs Included for Easy Handing. � Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.� CE Certified.
High Performance Dry Bath-HeatingHB-48-Set (with BLC548 Block)
““witeg””WiseTherm��HB High-performance Dry Bath-HeatingPrecise Temperature Control, Modular Blocks, Digital Timer & PID-Control System, Acrylic Lid, up to 150 ℃, ±0,2 ℃
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Block 1,5㎖㎖ tubes, 48 holes(BLC548)
Dry Bath-Heating PackageHB-96-Set (with 2 ea of BLC548 Blocks)
Dry Bath-Heating Dual ControlHB-96D-Set (with 2 ea of BLC548 Blocks)
2×BLC548 Blocks included
Acrylic LidsDual PID Controller
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
uupp ttoo 115500 ℃℃
<Continued on Next page>
Model HB-48-Set HB-96-Set HB-96D-Set
Dimension(w××d××h)
Block (mm) 90×120×60 (90×120×60)×2 ea (90×120×60)×2 ea
External (mm) 180×220×155 240×255×155 285×250×155
Capacity (1.5ml Tube) 48 ea 96 ea
Heater 150 W×2(Cartridge Heater) 150 W×4 (Cartridge Heater)
Temp.Range Ambient +5 ℃ to 150 ℃
Accuracy ±0,1 ℃ at 37 ℃, ±0,2 ℃ at 90 ℃, ±0,4 ℃ at 135 ℃
Heat-Up Speed Approx. 5 ℃/min
Controller Single Digital PID Controller Dual Digital PID Controller
Display Digital LCD with Back-Light Function
Sensor PT100
Material
Internal Stainless Steel (#304)
External Powder Coated Steel
Block Anodized Aluminum
Safety Device Over Temp. and Over Current Protector, Sensor Error Detector
Timer 99hr 59min (Delay & Continuous Function Included)
Others
CE CertifiedStorage Function (Temp., Timer), Locking Mode
User Self - compensation FunctionAlarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm) 400×270×200
Gross Weight 4 kg 6 kg
Power Consumption 300 W 600 W
Power plug type Hybrid E+F
Power Supply�� AC 230 V, 50 / 60 Hz
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
www.witeg.de 47
HeHeating, Block/Dry Bath
Ordering Information
DH.WHB00148 Dry Bath-Heating, HB-48 Unit OnlyDH.WHB00149� Dry Bath-Heating Package, HB-48-Set
with BLC548 Block for 1,5 ml Tubes, 48 holes
DH.WHB00196 Dry Bath-Heating, HB-96 Unit OnlyDH.WHB00197� Dry Bath-Heating Package, HB-96-Set
with Two BLC548 Blocks for 1,5 ml Tubes, 96 holes
DH.WHB00198 Dry Bath-Heating Dual Control, HB-96D Unit OnlyDH.WHB00199� Dry Bath-Heating HB-96D-Set
with Two BLC548 Blocks for 1,5 ml tubes, 96 holes
Optional AccessoriesDH.WHB510596� Block, BLC596, 0,2 ml PCR Tube, 96 holes
DH.WHB510570� Block, BLC570, 0,5 ml Centrifuge Tube, 63 holes DH.WHB511548� Block, BLC548, 1,5 ml Centrifuge Tube, 48 holes
DH.WHB521248� Block, BLT248, for Φ12 mm Test Tube, 48 holes DH.WHB521335� Block, BLT335, for Φ13 mm Test Tube, 30 holes DH.WHB521535� Block, BLT535, for Φ15 mm Test Tube, 30 holesDH.WHB521628� Block, BLT628, for Φ16,5 mm Test Tube, 24 holesDH.WHB521828� Block, BLT828, for Φ18 mm Test Tube, 24 holes
DH.WHB531515� Block, BLC515, 15 ml Conical Tube, 15 holes DH.WHB535008� Block, BLC008, 50 ml Conical Tube, 8 holes
DH.WHB500101 Block Extraction Tongs, BLE101�1×Block Extraction Tongs, BLE101 included
※ If you order BLT series Block, please make sure your test tube size is exact same with your order one.
Validation (IQ, OQ & PQ) ServiceDH.WHB30148 Validation Service(IQ, OQ & PQ), DBV148, for HB-48DH.WHB30196 Validation Service(IQ, OQ & PQ), DBV196, for HB-96 DH.WHB30198 Validation Service(IQ, OQ & PQ), DBV198, for HB-96D
<Continued from...““witeg””WiseTherm��HB High-performance Dry Bath-Heating >
BLC596 BLC570 BLC548 BLT248 BLT335
BLT535 BLT628 BLT828 BLC515 BLC008
BLE101
▶ Optional Accessories
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 222233--222255,, 226633--226655,, 337711,, 337722..
witeg Labortechnik GmbH48
Heating Block Heating & CoolingHe
Model HB -R48-Set
Dimension(w××d××h)
Block (mm) 90×120×60
External (mm) 185×230×220
Capacity (1.5ml Tube) 48 ea
Cooling Two Peltier Modules
Heater 150 W×2 (Cartridge Heater)
Temp.Range - 5 ℃ to 95 ℃
Accuracy ±0,15 ℃ at 37 ℃, ±0,15 ℃ at 90 ℃
Heat-Up Speed Approx. 5 ℃/ min
Cool-Down Speed 2,3 ℃ / min. between 95 ℃ to 25 ℃, 0,5 ℃ / min. between 25 ℃ to -5 ℃
Controller Digital PID Controller
Display Digital LCD Display with Back-Light Function
Sensor PT100
Material
Internal Stainless Steel (#304)
External Powder Coated Steel
Block Anodized Aluminum
Safety Device Over Temp. and Over Current Protector, Sensor Error Detector
Timer 99 hr 59 min (Delay & Continuous Function Included)
Option Blocks and Extraction Tong
Others
CE CertifiedStorage Function (Temp., Timer), Locking Mode
User Self - compensation FunctionAlarm (Error Status and Timer - end)
Packing Dimension(w××d××h) (mm) 350×220×310
Gross Weight 10 kg
Power Consumption 450 W
Power plug type Hybrid E+F
Power Supply�� AC 230 V, 50 / 60 Hz
““witeg””WiseTherm��HB-R High-performance Dry Bath-Heating && CoolingPrecise Temperature Control, Peltier Cooling System, Digital Timer & PID-Control System, Acylic Lid, -5 ℃~95 ℃, ±0,15 ℃
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Block 1,5㎖㎖ tubes, 48 holes (BLC548)
Back Light LCD
High Performance Dry Bath-Heating & CoolingHB-R48-Set (with BLC548 Block)
■■ Designed for Multi-function Digital Dry Bath-Heating & Cooling■■ Patented Jog-Shuttle Control System and Digital LCD Display with
Back-Light Function■■ CE Certified
Application & Features� Designed for Multi-function Digital Dry Bath-Heating & Cooling.�Modular Block.� Ideal for Enzyme Reactions, Inactivation of Sera, Incubation and Other Laboratory procedures.� Precise Temperature Control : -5 ℃ ~ 95 ℃ with ±0,15 ℃ Accuracy.�User’s Self-Compensation Function for Temperature. � Peltier Cooling System.� Digital Timer Included : up to 99 hr 59 min (Operation Time + Delay Time)� Storage Function for the Set Values of Temperature and Timer.�Over Temperature & Over Current Protection and Sensor Error Detection.� Alarm Function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)� The Block Extraction Tongs Included for Easy Handing.� Various kind of Blocks are Offered. (Optional) � Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.
-- 55 ℃℃~~ 9955 ℃℃
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
<Continued on Next page>
www.witeg.de 49
HeHeating Block Heating & Cooling
Ordering Information
DH.WHB00248 Dry Bath-Heating & Cooling, HB-R48 Unit OnlyDH.WHB00249� Dry Bath-Heating & Cooling Package, HB-R48-Set
with BLC548 Block for 1,5 ml Tubes, 48holes
Optional AccessoriesDH.WHB510596� Block, BLC596, 0,2 ml PCR Tube, 96 holes
DH.WHB510570� Block, BLC570, 0,5 ml Centrifuge Tube×63 holes DH.WHB511548� Block, BLC548, 1,5 ml Centrifuge Tube×48 holes
DH.WHB521248� Block, BLT248, for Φ12 mm Test Tube, 48 holes DH.WHB521335� Block, BLT335, for Φ13 mm Test Tube, 30 holesDH.WHB521535� Block, BLT535, for Φ15 mm Test Tube, 30 holesDH.WHB521628� Block, BLT628, for Φ16,5 mm Test Tube, 24 holesDH.WHB521828� Block, BLT828, for Φ18 mm Test Tube, 24 holes
DH.WHB531515� Block, BLC515, 15 ml Conical Tube, 15 holesDH.WHB535008� Block, BLC008, 50 ml Conical Tube, 8 holes
DH.WHB500101 Block Extraction Tongs, BLE101�1×Block Extraction Tongs, BLE101 included
※ If you order BLT series Block, please make sure your test tube size is exact same with your order one.
Validation (IQ, OQ & PQ) ServiceDH.WHB30248 Validation Service(IQ, OQ & PQ), DBRV248, for HB-R48
<Continued from...““witeg””WiseTherm��HB-R High-performance Dry Bath-Heating && Cooling >
BLC596 BLC570 BLC548 BLT248 BLT335
BLT535 BLT628 BLT828 BLC515 BLC008
BLE101
▶ Optional Accessories
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 222233--222255,, 226633--226655,, 337711,, 337722..
50
FFoorr SSpphheerriiccaall ffllaasskk●● Aluminum-case Heating Mantles with Controller.●● Aluminum-case Stirrer Heating Mantles with Controller.●● Aluminum-case Heating Mantles.●● 10~100 Lit., Large Capacity Heating Mantles, with Steel case.●● High-temperature Aluminum-case Heating Mantles.●● Fabric-housed Heating Mantles.
FFoorr BBeeaakkeerr●● Aluminum-case Beaker Heating Mantles with Controller.●● Aluminum-case Stirrer Beaker Mantles with Controller.●● Aluminum-case Beaker Heating Mantles.●● Fabric-housed Beaker Heating Mantles.
FFoorr RReeaaccttiioonn VVeesssseell●● Reaction Vessel Heating Mantles.●● Reaction Vessel Mantle with Bottom-Outlet.●● Aluminum-case Stirrer Reaction Vessel Mantles,
with Controller.●● Fabric-housed Reaction Vessel Mantles.
FFoorr AAllll HHeeaattiinngg IInnssttrruummeennttss CCoonnttrrooll●● Analog Compact Controller.●● Digital Feedback Controller.●● Analog Aluminum-case Multi Heating Mantles,
with 3 & 6 Places.●● Fabric Heating Mantle Tops.●● Pear-shape Flask Micro-Heating Mantles.●● Heating Tapes, Standard-type.●● Customized Heating Mantles & Insulation.
High Quality !
WHM12034
Stirrer Heating Mantle
WHM12073
Large CapacityHeating Mantle
WHM12094
High-Temp. Heating Mantle
WHM121606
Stirrer Beaker Heating Mantle
WHM12217
Reaction VesselHeating Mantle
WHM722101
Reaction Vessel HeatingMantle with Controller
WHM-C10A
Analog Compact Controller
WHM-C10D
Digital Feedback Controller
WHM12293
Analog 6 places Heating Mantle
WiseTherm��
HeatingMantles
HeatingMantles
Jump into the World!
WiseTherm�� WHM-seriesHigh-Quality Heating Mantles
Full choices of Vessel, Capacity, Housing and Control are Offered !!■Covering All Kind of Vessels : Spherical (Round) Flask Mantles, Pear-shape Flask Mantles,
Beaker Mantles, Reaction Vessel Mantle and Heating Tapes.■Covering All Sizes of Vessels :
- 50, 100, 250, 500, 1.000, 2.000, 3.000, 5.000, 6.000, 10.000, 20.000 ml Round Flasks.- 10, 20, 50, 100 L Large Capacity Round Flasks.- 100, 250, 400, 600, 800, 1.000, 2.000, 3.000, 4.000, 5.000 ml Beakers.- 500, 1.000, 2.000, 3.000, 5.000, 6.000, 7.000, 10.000 ml Reaction Vessels.- 10, 20, 50, 100 L Large Capacity Reaction Vessels.- 10, 25, 50, 100, 250 ml Pear-shape Flasks.
■Covering All Brands of Vessels : Schott-DURAN, IWAKI, PYREX and Kimble.■Various Choices of Housing : Aluminum housed Mantles, Fabric Mantles, Steel Housed
Mantles for Large Capacity Vessels.■Various Choices of Functionality : Mantle -only, Mantle with Heating Control, Mantle with
Heating/Stirring Control, Remote Digital Feedback Thermo Controller.
Powered by Digital Control Technology
■Maximum Temperature : 450 ℃ (Standard Model) or 650 ℃ (High-Temp∙Model).■Highly-processed Aluminum Case offers Robust Standing, Easy Handling and Usability on
the Magnetic Stirrer.■Optional Remote Thermo Controllers are Available (Analog or Digital).■Nickel Chrome Heating Element - Coil Type : Acid-Resistant, Long Life Time.■K-type Thermo Sensor is Basically Embedded (except Fabric Mantles)
which Enables Precise Control of the Mantles when used Together with Remote Digital Controller.
■Feedback Temperature Control is Supported with Remote Digital Controller.■External Thermo Sensor is available, which Enables Precise Control
of the Temperature of Liquid Sample in the Vessel when used Together with Remote Digital Controller.
51www.witeg.de
witeg Labortechnik GmbH52
Heating, Electric Mantle He
Heating Mantle with Controller for Round Flasks (WHM12014)
Stirrer Heating Mantle with Controllerfor Round Flasks (WHM12034)
■ Full Choices of Vessel, Capacity, Housing and Control are Offered! ■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time
■ Built-in Temperature Controller■ All Kinds of Round Flasks can be used - DURAN/Kimax/Pyrex/Iwaki■ CE Certified
Heating Mantlewith Controller
Stirrer Heating Mantlewith Controller
Oval-type Stirrer Bar
450 ℃ 50~750 rpm, 450 ℃
““witeg””WiseTherm��WHM Aluminum-case Heating Mantles with ControllerNickel Chrome Heating Element, Built-in Temperature Controller, for Spherical Flask, 50~20.000 ml, 450 ℃
““witeg””WiseTherm��WHM Aluminum-case Stirrer Heating Mantles with ControllerNickel Chrome Heating Element, Stirring & Temperature Controller, for Spherical Flask, 50~6.000 ml, 450 ℃, 50~750 rpm
■ Full Choices of Vessel, Capacity, Housing and Control are Offered!■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time
■ Built-in Temperature Controller■ All Kinds of Round Flasks can be used - DURAN/Kimax/Pyrex/Iwaki ■ CE Certified
※※ 2 pcs of PTFE Magnetic Stirrer Bars Offered : Oval-Type, Φ 6,0×L 15 mm(CW.001.615) and Φ10×L25 mm(CW.001.625.10) one each
※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex※※ Available for “Iwaki” Flask 3.000 ml
☆-Marked 10.000 ml & 20.000 ml Mantle Steel-case / Magnetic Stirring is not Available ※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ(mm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
Support Rod
ΦΦ××H (mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM12030 DH.WHM12040 50 49 ~ 52 80 40 Φ 145×H 140 Φ 13×H 440 Common-use
DH.WHM12031 DH.WHM12041 100 63 ~ 66 80 40 Φ 145×H 140 Φ 13×H 440 Common-use
DH.WHM12032 DH.WHM12042 250 83 ~ 86 140 50 Φ 145×H 140 Φ 13×H 440 Common-use
DH.WHM12033 DH.WHM12043 500 102 ~ 105 240 65 Φ 190×H 165 Φ 13×H 440 Common-use
DH.WHM12034 DH.WHM12044 1.000 130 ~ 133 350 75 Φ 190×H 165 Φ 13×H 440 Common-use
DH.WHM12035 DH.WHM12045 2.000 165 ~ 169 450 100 Φ 270×H 200 Φ 13×H 660 for DU/Iw.
DH.WHM120351 DH.WHM120451 2.000 161 ~ 164 450 100 Φ 270×H 200 Φ 13×H 660 for Ki/Py.
DH.WHM12036 DH.WHM12046 3.000 184 ~ 187 550 105 Φ 270×H 200 Φ 13×H 660 for DU/Ki.
DH.WHM12037 DH.WHM12047 5.000 221 ~ 224 800 131 Φ 325×H 226 Φ 13×H 800 Common-use
DH.WHM12038 DH.WHM12048 6.000 234 ~ 237 800 131 Φ 325×H 226 Φ 13×H 800 for DU/Ki.
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ(mm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
Support Rod
ΦΦ××H (mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM12010 DH.WHM12020 50 49 ~ 52 80 40 Φ 145×H 140 Φ 13×H 440 Commom-Use
DH.WHM12011 DH.WHM12021 100 63 ~ 66 80 40 Φ 145×H 140 Φ 13×H 440 Commom-Use
DH.WHM12012 DH.WHM12022 250 83 ~ 86 140 50 Φ 145×H 140 Φ 13×H 440 Commom-Use
DH.WHM12013 DH.WHM12023 500 102 ~ 105 240 65 Φ 190×H 165 Φ 13×H 440 Commom-Use
DH.WHM12014 DH.WHM12024 1.000 130 ~ 133 350 75 Φ 190×H 165 Φ 13×H 440 Commom-Use
DH.WHM12015 DH.WHM12025 2.000 165 ~ 169 450 100 Φ 270×H 200 Φ 13×H 660 for DU./Iw.
DH.WHM120151 DH.WHM120251 2.000 161 ~ 164 450 100 Φ 270×H 200 Φ 13×H 660 for Ki./Py.
DH.WHM12016 DH.WHM12026 3.000 184 ~ 187 550 105 Φ 270×H 200 Φ 13×H 660 for DU./Ki.
DH.WHM12017 DH.WHM12027 5.000 221 ~ 224 800 131 Φ 325×H 226 Φ 13×H 800 Commom-Use
DH.WHM12018 DH.WHM12028 6.000 234 ~ 237 800 131 Φ 325×H 226 Φ 13×H 800 for DU./Ki.
DH.WHM12019 DH.WHM12029 10.000 ☆ 278 ~ 282 1.400 150 Φ 390×H 240 Φ 13×H 800 for DU.
DH.WHM12070 DH.WHM12071 20.000 ☆ 344 ~ 348 2.000 200 Φ 470×H 260 Φ 13×H 800 for DU.
www.witeg.de 53
HeHeating, Electric Mantle
■ Full Choices of Vessel, Capacity, Housing and Control are offered !■ Nickel Chrome Heating Element - Coil Type
: Acid-resistant, Long Life Time■ Steel Case : Magnetic Stirring is not available
■ Optional Remote Thermo Controllers are Available(Analog : WHM-C10A, Digital : WHM-C10D)
■ K-type Thermo Sensor is Basically Embedded■ CE Certified
““witeg””WiseTherm��WHM Aluminum-Case Heating Mantles, 450 ℃, 50 ~ 6.000 ml Nickel Chrome Heating Element, Can be used with Magnetic Stirrers, for Spherical Flask, K-type Thermo-Sensor Integrated
““witeg””WiseTherm��WHM Large Capacity Steel Case Heating Mantles, 450 ℃, 10 ~ 100 LitNickel Chrome Heating Element, for Spherical Flask, K-type Thermo-sensor Integrated
■ Full Choices of Vessel, Capacity, Housing and control are offered !■ Highly-processed Aluminum Case Offers Robust Standing,
Easy Handling and Usability on the Magnetic Stirrer■ Optional Remote Thermo Controllers are Available
(Analog : WHM-C10A, Digital : WHM-C10D)
■ Nickel Chrome Heating Element - Coil Type : Acid-Resistant, Long Life Time
■ K-type Thermo Sensor is Basically Embedded ■ CE Certified
※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex
Heating Mantle for Round Flasks (WHM12054)
Large Capacity Heating Mantle for Round Flasks (WHM12073)
WHM-C10D
Realize Precise Temperature Control by integrated K-type Thermo-sensor
Integrated White K-type Thermo-sensor
Nickel ChromeHeating Element- Coil Type Al-Case
Heating Mantle Steel-CaseHeating Mantle
※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex
450 ℃
450 ℃
(Deal Drawing)(Deal Drawing)
WHM - C10A
Analog Compact Controller &Digital Feedback Controller (Optional, See page 62)
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ(mm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
Support Rod
ΦΦ××H (mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM12050 DH.WHM12060 50 49 ~ 52 80 48 Φ 145×H 75 Φ 13×H 440 Common-use
DH.WHM12051 DH.WHM12061 100 63 ~ 66 80 50 Φ 145×H 75 Φ 13×H 440 Common-use
DH.WHM12052 DH.WHM12062 250 83 ~ 86 140 50 Φ 145×H 75 Φ 13×H 440 Common-use
DH.WHM12053 DH.WHM12063 500 102 ~ 105 240 85 Φ 190×H 110 Φ 13×H 440 Common-use
DH.WHM12054 DH.WHM12064 1.000 130 ~ 133 350 85 Φ 190×H 110 Φ 13×H 440 Common-use
DH.WHM12055 DH.WHM12065 2.000 165 ~ 169 450 110 Φ 270×H 135 Φ 13×H 660 for DU/Iw.
DH.WHM120551 DH.WHM120651 2.000 161 ~ 164 450 110 Φ 270×H 135 Φ 13×H 660 for Ki/Py.
DH.WHM12056 DH.WHM12066 3.000 184 ~ 187 550 110 Φ 270×H 135 Φ 13×H 660 for DU/Ki.
DH.WHM12057 DH.WHM12067 5.000 221 ~ 224 800 140 Φ 325×H 165 Φ 13×H 800 Common-use
DH.WHM12058 DH.WHM12068 6.000 234 ~ 237 800 140 Φ 325×H 165 Φ 13×H 800 for DU/Ki.
Catalog No. FlaskCapacity
(Lit.)
Flask Dia. ΦΦ(mm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
Support Rod
ΦΦ××H (mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM12073 DH.WHM12083 10 278 ~ 282 1.400 160 Φ 390×H 240 Φ 13×H 800 for DU.
DH.WHM12074 DH.WHM12084 20 344 ~ 348 2.000 200 Φ 470×H 260 Φ 13×H 800 for DU.
DH.WHM12075 DH.WHM12085 50 489 ~ 494 4.000 282 Φ 680×H 360 Φ 13×H 800 Common-use
DH.WHM12076 DH.WHM12086 100 609 ~ 614 6.000 350 Φ 840×H 440 n/a Common-use
witeg Labortechnik GmbH54
Heating, Electric Mantle He
““witeg””WiseTherm��WHM High-Temperature Aluminum-case Heating Mantles, 650℃,100~10.000 mlNickel Chrome Heating Element, Can be used with Magnetic Stirrers, for Spherical Flask, K-type Thermo-sensor Integrated
““witeg””WiseTherm��WHM Fabric-Housed Heating Mantles, Self-StandingNickel Chrome Heating Element, for Spherical Flask, 450℃, 50 ~10.000 ml
☆-Marked 10.000 ml Mantle Steel-case / Magnetic Stirring is not Available ● Option : Digital Feedback Controller or Analog Controller (See Page 62)
High-temp. Heating Mantle for Round Flasks (WHM12094)
Fabric-housed Heating Mantlefor Round Flasks (WHM12114)
High-Temp.Heating Mantle
Fabric-housed Heating Mantle
※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex ※※ Available for “Iwaki” Flask 3.000 ml
● Option : Digital Feedback Controller or Analog Controller (See Page 62)
650 ℃ 450 ℃
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time
■ Optional Remote Thermo Controllers are Available(Analog : WHM-C10A, Digital : WHM-C10D)
■ CE Certified
WHM-C10D
Realize Precise Temperature Control by integrated K-type Thermo-sensor
Integrated White K-type Thermo-sensor
Nickel Chrome Heating Element -Coil Type
(Deal Drawing)
WHM - C10A
Analog Compact Controller &Digital Feedback Controller (Optional, See page 62)
(Deal Drawing)
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ(mm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
Support Rod
ΦΦ××H(mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM12091 DH.WHM12101 100 63 ~ 66 120 50 Φ 145×H 75 Φ 13×H 440 Common-use
DH.WHM12092 DH.WHM12102 250 83 ~ 86 200 50 Φ 145×H 75 Φ 13×H 440 Common-use
DH.WHM12093 DH.WHM12103 500 102 ~ 105 350 85 Φ 190×H 110 Φ 13×H 440 Common-use
DH.WHM12094 DH.WHM12104 1.000 130 ~ 133 450 85 Φ 190×H 110 Φ 13×H 440 Common-use
DH.WHM12095 DH.WHM12105 2.000 165 ~ 169 600 110 Φ 270×H 135 Φ 13×H 660 for DU/Iw.
DH.WHM120951 DH.WHM121051 2.000 161 ~ 164 600 110 Φ 270×H 135 Φ 13×H 660 for Ki/Py.
DH.WHM12096 DH.WHM12106 3.000 184 ~ 187 700 110 Φ 270×H 135 Φ 13×H 660 for DU/Ki.
DH.WHM12097 DH.WHM12107 5.000 221 ~ 224 1.200 140 Φ 325×H 165 Φ 13×H 800 Common-use
DH.WHM12098 DH.WHM12108 6.000 234 ~ 237 1.200 140 Φ 325×H 165 Φ 13×H 800 for DU/Ki.
DH.WHM12099 DH.WHM12109 10.000 ☆ 278 ~ 282 1.800 160 Φ 390×H 240 Φ 13×H 800 for DU.
Catalog No.Flask
Capacity (ml)Flask
Dia. ΦΦ(mm) Watts
(W)Inside
Depth (mm)Mantle OutsideΦΦ××H (mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM12110 DH.WHM12120 50 49 ~ 52 80 30 Φ 80×H 55 Common-use
DH.WHM12111 DH.WHM12121 100 63 ~ 66 80 40 Φ 100×H 65 Common-use
DH.WHM12112 DH.WHM12122 250 83 ~ 86 140 50 Φ 125×H 75 Common-use
DH.WHM12113 DH.WHM12123 500 102 ~ 105 240 60 Φ 155×H 85 Common-use
DH.WHM12114 DH.WHM12124 1.000 130 ~ 133 350 75 Φ 191×H 100 Common-use
DH.WHM12115 DH.WHM12125 2.000 165 ~ 169 450 95 Φ 226×H 120 ideal for DU./Iwa.
DH.WHM121151 DH.WHM121251 2.000 161 ~ 164 450 95 Φ 226×H 120 ideal for Kim./Py.
DH.WHM12116 DH.WHM12126 3.000 184 ~ 187 550 105 Φ 255×H 130 ideal for DU./Kim.
DH.WHM12117 DH.WHM12127 5.000 221 ~ 224 800 130 Φ 293×H 155 Common-use
DH.WHM12118 DH.WHM12128 6.000 234 ~ 237 800 135 Φ 310×H 160 for DU/Kim.
DH.WHM12119 DH.WHM12129 10.000 278 ~ 282 1.400 160 Φ 365×H 185 for DU.
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Highly-processed Aluminum Case Offers Robust Standing,
Easy Handling and Usability on the Magnetic Stirrer
■ Optional Remote Thermo Controllers are Available(Analog : WHM-C10A, Digital : WHM-C10D)
■ K-type Thermo Sensor is Basically Embedded ■ CE Certified
www.witeg.de
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time
■ External Thermo Sensor is (K-type) Available, which enablesPrecise Control of the Temperature of Liquid Sample in the Vesselwhen used together with Remote Digital Controller
■ CE Certified
55
HeHeating, Electric Mantle
““witeg””WiseTherm��WHM Fabric Heating Mantle Tops, 450 ℃Nickel Chrome Heating Element, For the Upper Half of 1- /2- /3- neck Flasks, Universal Type
““witeg””WiseTherm��WHM Pear-shape Flask Micro-Heating Mantles, 10~250 ml, 450 ℃NickelChrome Heating Element
● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)
Pear-Shape Flask Micro-Heating Mantles(WHM12273)Analog Compact Controller &
Digital Feedback Controller(Optional, See page 62)
WHM-C10D
WHM - C10A
Fabric Heating Mantle and Top (WHM12114 & WHM121303)
Fiabric Heating Mantle Top
※ Customized Vessel like Diameter (Φ)×Height (cm) or Inside Depth (mm) can be Offered※ We recommend to use a matching power supply with 30 V, 60 V, or 110 V output.
450℃ 450℃
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time■ Optional Remote Thermo Controllers are Available
(Analog : WHM-C10A, Digital : WHM-C10D)
■ External Thermo Sensor is (K-type) Available, which enablesPrecise Control of the Temperature of Liquid Sample in the Vesselwhen used together with Remote Digital Controller
■ Can be used with both Mantles of Fabric-case and Metal-case■ CE Certified
Pear-Shape FlaskMicro-Heating Mantle
Catalog No.Flask
Capacity (ml)Flask
Dia. ΦΦ(mm)Watts & Voltage
Inside Depth (mm)
Mantle OutsideΦΦ××H (mm)
DH.WHM12271 10 30 ~ 33 20 W, 30 V � 35 Φ 45×H 40DH.WHM12272 25 40 ~ 43 20 W, 60 V � 40 Φ 60×H 50DH.WHM12273 50 50 ~ 53 85 W, 60 V � 50 Φ 70×H 60DH.WHM12274 100 59 ~ 62 80 W, 110 V � 55 Φ 90×H 70
DH.WHM12275 250 80 ~ 83 140 W, 110 V � 65 Φ 120×H 80
Catalog No.Flask
Capacity (ml)Flask
Dia. ΦΦ (mm)Watts
(W)Inside
Depth (mm)Mantle OutsideΦΦ××H (mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM121301 DH.WHM121311 250 83 ~ 86 100 100 120 Common-use
DH.WHM121302 DH.WHM121312 500 102 ~ 105 140 140 140 Common-use
DH.WHM121303 DH.WHM121313 1.000 130 ~ 133 240 240 180 Common-use
DH.WHM121304 DH.WHM121314 2.000 165 ~ 169 350 350 220 Common-use
DH.WHM121305 DH.WHM121315 3.000 184 ~ 187 400 400 235 Common-use
DH.WHM121306 DH.WHM121316 5.000 221 ~ 224 550 550 275 Common-use
DH.WHM121307 DH.WHM121317 10.000 278 ~ 282 700 700 350 Common-use
DH.WHM121308 DH.WHM121318 20.000 344 ~ 348 1.600 1.600 430 Common-use
DH.WHM121309 DH.WHM121319 50.000 489 ~ 494 2.000 2.000 590 Common-use
DH.WHM121310 DH.WHM121320 100.000 609 ~ 614 4.000 4.000 730 Common-use
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ (mm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
Support Rod
ΦΦ××H (mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM12141 DH.WHM12151 100 50 ~ 52 80 40 Φ 145×H 105 Φ 13×H 440 Common-use
DH.WHM12142 DH.WHM12152 250 68 ~ 70 140 65 Φ 145×H 140 Φ 13×H 440 Common-use
DH.WHM12143 DH.WHM12153 400 79 ~ 81 240 70 Φ 145×H 140 Φ 13×H 440 for DU.
DH.WHM121431 DH.WHM121531 400 76 ~ 78 240 75 Φ 145×H 140 Φ 13×H 440 for Iw/Ki/Py.
DH.WHM12144 DH.WHM12154 600 88 ~ 90 240 75 Φ 145×H 140 Φ 13×H 440 Common-use
DH.WHM12145 DH.WHM12155 800 98 ~ 100 300 90 Φ 190×H 165 Φ 13×H 440 Common-use
DH.WHM12146 DH.WHM12156 1.000 105 ~ 108 350 90 Φ 190×H 165 Φ 13×H 440 Common-use
DH.WHM12147 DH.WHM12157 2.000 130 ~ 132 450 125 Φ 270×H 200 Φ 13×H 660 Common-use
DH.WHM12148 DH.WHM12158 3.000 151 ~ 153 550 160 Φ 270×H 235 Φ 13×H 660 for DU/Iw.
DH.WHM121481 DH.WHM121581 4.000 160 ~ 162 700 160 Φ 270×H 235 Φ 13×H 660 for Ki/Py.
DH.WHM12149 DH.WHM12159 5.000 169 ~ 171 800 160 Φ 270×H 235 Φ 13×H 660 for DU.
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ (mm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
Support Rod
ΦΦ××H (mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM121601 DH.WHM121611 100 50 ~ 52 80 45 Φ145×H140 Φ13×H440 Common-use
DH.WHM121602 DH.WHM121612 250 68 ~ 70 140 70 Φ190×H165 Φ13×H440 Common-use
DH.WHM121603 DH.WHM121613 400 79 ~ 81 240 70 Φ190×H165 Φ13×H440 for DU.
DH.WHM121604 DH.WHM121614 400 76 ~ 78 240 70 Φ190×H165 Φ13×H440 for Iw/Ki/Py.
DH.WHM121605 DH.WHM121615 600 88 ~ 90 240 72 Φ190×H165 Φ13×H440 Common-use
DH.WHM121606 DH.WHM121616 1.000 105 ~ 108 350 105 Φ270×H200 Φ13×H440 Common-use
DH.WHM121607 DH.WHM121617 2.000 130 ~ 132 450 140 Φ270×H235 Φ13×H660 Common-use
DH.WHM121608 DH.WHM121618 3.000 151 ~ 153 550 140 Φ270×H235 Φ13×H660 for DU/Iw.
DH.WHM121609 DH.WHM121619 4.000 160 ~ 162 700 170 Φ325×H270 Φ13×H660 for Ki/Py.
DH.WHM121610 DH.WHM121620 5.000 169 ~ 171 800 170 Φ325×H270 Φ13×H660 for DU.
witeg Labortechnik GmbH56
Heating, Electric Mantle He
““witeg””WiseTherm��WHM Aluminum-case Beaker Heating Mantles with ControllerNickel Chrome Heating Element, Built-in Temperature Controller, 100 ~ 5.000 ml, 450 ℃
““witeg””WiseTherm��WHM Aluminum-case Stirrer Beaker Mantles with ControllerNickel Chrome Heating Element, Stirring & Temperature Controller, 100 ~ 5.000 ml, 450 ℃
Beaker Heating Mantles with Controller (WHM12146)
Stirrer Beaker Heating Mantleswith Controller (WHM121606)
Beaker Heating Mantle with Controller
Stirrer Beaker Heating Mantle with Controller
Plain-type Stirrer Bars
450℃ 50~750rpm, 450℃
■ Full Choices of Vessel, Capacity, Housing and Control are Offered!■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time
■ Built-in Temperature Controller■ All Kinds of Round Flasks Can be used - DURAN/Kimax/Pyrex/Iwaki■ CE Certified
※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time
■ Built-in Stirring & Temperature Controller■ All Kinds of Round Flasks Can be used - DURAN/Kimax/Pyrex/Iwaki■ CE Certified
※※ 2 pcs of PTFE Magnetic Stirrer Bar Offered : Oval-type, Φ 6,0×L 15 ㎜
(CW.001.615) and Φ10×L25 ㎜(CW.001.625.10) one each
※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex
www.witeg.de
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ (mm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
Support Rod
ΦΦ××H (mm)
Application (Flask-brand)with 230 V with 110 V
DH.WHM12170 DH.WHM12180 100 50 ~ 52 80 50 Φ 145×H 75 Φ 13×H 440 Common-use
DH.WHM12171 DH.WHM12181 250 68 ~ 70 140 50 Φ 145×H 75 Φ 13×H 440 Common-use
DH.WHM12172 DH.WHM12182 400 79 ~ 81 240 85 Φ 145×H 110 Φ 13×H 440 for DU.
DH.WHM121721 DH.WHM121821 400 76 ~ 78 240 85 Φ 145×H 110 Φ 13×H 440 for Iw/Ki/Py.
DH.WHM12173 DH.WHM12183 600 88 ~ 90 240 85 Φ 145×H 110 Φ 13×H 440 Common-use
DH.WHM12174 DH.WHM12184 800 98 ~ 100 300 90 Φ 145×H 110 Φ 13×H 440 Common-use
DH.WHM12175 DH.WHM12185 1.000 105 ~ 108 350 115 Φ 145×H 140 Φ 13×H 440 Common-use
DH.WHM12176 DH.WHM12186 2.000 130 ~ 132 450 140 Φ 190×H 165 Φ 13×H 660 Common-use
DH.WHM12177 DH.WHM12187 3.000 151 ~ 153 550 175 Φ 270×H 200 Φ 13×H 660 for DU/Iw.
DH.WHM12178 DH.WHM12188 4.000 160 ~ 162 700 175 Φ 270×H 200 Φ 13×H 660 for Ki/Py.
DH.WHM12179 DH.WHM12189 5.000 169 ~ 171 800 175 Φ 270×H 200 Φ 13×H 660 for DU.
DH.WHM121791 DH.WHM121891 10.000☆ 216 ~ 219 1.400 245 Φ 325×H 270 Φ 13×H 660 for DU.
57
HeHeating, Electric Mantle
““witeg””WiseTherm��WHM Aluminum-case Beaker Heating Mantles, 450 ℃Nickel Chrome Heating Element, Can be used with Magnetic Stirrers, K-type Thermo-sensor Integrated, 100 ~ 10.000 ml
““witeg””WiseTherm��WHM Fabric-Housed Beaker Heating Mantles, 450 ℃Nickel Chrome Heating Element, for Beakers, Self-Standing 50 ~ 5.000 ml
※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex
☆-Marked 10.000 ml Mantle Steel-case / Magnetic Stirring is not available ● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)
● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)
Beaker Heating Mantles(WHM12173)
Fabric-Housed Beaker Heating Mantles(WHM12196)
Al-Case BeakerHeating Mantle
Fabric-housedHeating Mantle
450℃ 450℃
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time
■ Optional Remote Thermo Controllers are Available(Analog : WHM-C10A, Digital : WHM-C10D)
■ CE Certified
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Highly-processed Aluminum Case Offers Robust Standing,
Easy Handling and Usability on the Magnetic Stirrer■ Optional Remote Thermo Controllers are Available
(Analog : WHM-C10A, Digital : WHM-C10D)
■ Nickel Chrome Heating Element - Coil Type : Acid-Resistant, Long Life Time
■ K-type Thermo Sensor is Basically Embedded ■ CE Certified
WHM-C10D
Integrated White K-type Thermo-sensor
Nickel ChromeHeating Element -Coil Type
(Deal Drawing)
WHM - C10A
Analog Compact Controller &Digital Feedback Controller
(Optional, See page 62)
(Deal Drawing)
Realize Precise TemperatureControl by Integrated
K-type Thermo-sensor
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ (mm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
Support Rod
ΦΦ××H (mm)
Application (Flask-brand)with 230V with 110V
DH.WHM12190 DH.WHM12200 50 41 ~ 43 80 40 Φ 80×H 65 Φ 13×H 440 Common-use
DH.WHM12191 DH.WHM12201 100 50 ~ 52 80 50 Φ 90×H 75 Φ 13×H 440 Common-use
DH.WHM12192 DH.WHM12202 250 68 ~ 701 40 60 Φ 110×H 85 Φ 13×H 440 Common-use
DH.WHM12193 DH.WHM12203 400 79 ~ 812 40 80 Φ 120×H 105 Φ 13×H 440 for DU.
DH.WHM121931 DH.WHM122031 400 76 ~ 782 40 80 Φ 120×H 105 Φ 13×H 440 for Iw/Ki/Py.
DH.WHM12194 DH.WHM12204 600 88 ~ 902 40 95 Φ 130×H 115 Φ 13×H 440 Common-use
DH.WHM12195 DH.WHM12205 800 98 ~ 100 300 95 Φ 130×H 115 Φ 13×H 440 Common-use
DH.WHM12196 DH.WHM12206 1.000 105 ~ 108 350 110 Φ 160×H 135 Φ 13×H 660 Common-use
DH.WHM12197 DH.WHM12207 2.000 130 ~ 132 450 150 Φ 190×H 175 Φ 13×H 660 Common-use
DH.WHM12198 DH.WHM12208 3.000 151 ~ 153 550 170 Φ 220×H 195 Φ 13×H 660 for DU/Iw.
DH.WHM121981 DH.WHM122081 4.000 160 ~ 162 700 180 Φ 240×H 225 Φ 13×H 660 for Ki/Py.
DH.WHM12199 DH.WHM12209 5.000 169 ~ 171 800 200 Φ 220×H 205 Φ 13×H 660 for DU.
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ (cm)
Watts(W)
Inside Depth (mm)
Mantle OutsideΦΦ××H (mm)
Support Rod ΦΦ××H (mm)with 230 V with 110 V
DH.WHM12211 DH.WHM12221 500 Φ 11×H 10 240 80 Φ 145×H 105 Φ 13×H 660
DH.WHM12212 DH.WHM12222 1.000 Φ 11×H 15 350 115 Φ 145×H 140 Φ 13×H 660
DH.WHM12213 DH.WHM12223 2.000 Φ 13×H 19 450 140 Φ 190×H 165 Φ 13×H 660
DH.WHM12214 DH.WHM12224 3.000 Φ 13×H 28 550 210 Φ 270×H 235 Φ 13×H 800
DH.WHM12215 DH.WHM12225 5.000 Φ 16×H 29 800 210 Φ 270×H 235 Φ 13×H 800
DH.WHM12216 DH.WHM12226 6.000 Φ 21,5×H 24 800 210 Φ 270×H 235 Φ 13×H 800DH.WHM122161 DH.WHM122261 7.000 Φ 21,5×H 25 850 210 Φ 270×H 235 Φ 13×H 800
DH.WHM12217 DH.WHM12227 10.000 Φ 21,5×H 33 1.400 245 Φ 325×H 270 Φ 13×H 800
DH.WHM122171 DH.WHM122271 10.000 Φ 24×H 31 1.400 245 Φ 325×H 270 Φ 13×H 800
Catalog No. FlaskCapacity
(Lit.)
Flask Dia. ΦΦ (cm)
Watts(kW)
Inside Depth (mm)
Mantle OutsideΦΦ××H (mm)
Support Rod ΦΦ××H (mm)with 230V with 110V
DH.WHM12218 DH.WHM12228 20 Φ 27×H 45 2 360 Φ 390×H 410 Φ 13×H 800
DH.WHM122181 DH.WHM122281 20 Φ 29×H 42 2 360 Φ 390×H 410 Φ 13×H 800
DH.WHM12219 DH.WHM12229 50 Φ 31,5×H 81 4 720 Φ 470×H 800 Φ 13×H 800
DH.WHM12220 DH.WHM12230 100 Φ 41,5×H 91 6 800 Φ 570×H 900 Φ 13×H 800
witeg Labortechnik GmbH58
Heating, Electric Mantle He
““witeg””WiseTherm��WHM Reaction Vessel Heating Mantles, 450 ℃Aluminum Exterior with Fabric Interior, for Cylindrical, K-type Thermo-sensor Integrated, 0,5 ~ 100 Lit■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Highly-processed Aluminum Case Offers Robust Standing,
Easy Handling and Usability on the Magnetic Stirrer■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time■ Optional Remote Thermo Controllers are available
(Analog : WHM-C10A, Digital : WHM-C10D)
■ K-type Thermo Sensor is Basically Embedded (Except Fabric Mantles) which Enables Precise Control of the Mantles when used together with Remote Digital Controller
■ External Thermo Sensor is Available, which Enables Precise Control of the Temperature of Liquid Sample in the Vessel when used together with Remote Digital Controller
■ CE Certified
Reaction Vessel Heating Mantles(WHM12217)
Analog Compact Controller &Digital Feedback Controller
(Optional, See page 62) WHM-C10D WHM-C10A
Realize Precise TemperatureControl by Integrated
K-type Thermo-sensor
Integrated White K-type Thermo-sensor
Nickel Chrome HeatingElement - Coil Type
Reaction VesselHeating Mantle
With Steel Case, 20~100 Lit., Not available to use with Magnetic Stirrers
※ Customized Vessel like Diameter (Φ)×Height (cm) or Inside Depth (mm) can be Offered
450 ℃
● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)
● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)
(Deal Drawing)(Deal Drawing)
With Aluminum Case, 0,5~10 Lit., Can be used with Magnetic Stirrers
www.witeg.de
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ(cm)
Watts(W)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
BottomOutlet
(Hole)L××w (mm)
Support Rod
ΦΦ××H (mm)with 230 V with 110 V
DH.WHM12231 DH.WHM12241 500 Φ11×H10 240 80 Φ 145×H 105 L 72×w 40 Φ 13×H 660
DH.WHM12232 DH.WHM12242 1.000 Φ11×H15 350 115 Φ 145×H 140 L 72×w 40 Φ 13×H 660
DH.WHM12233 DH.WHM12243 2.000 Φ13×H19 450 140 Φ 190×H 165 L 72×w 40 Φ 13×H 800
DH.WHM12234 DH.WHM12244 3.000 Φ13×H28 550 210 Φ 270×H 235 L 120×w 70 Φ 13×H 800DH.WHM12235 DH.WHM12245 5.000 Φ16×H29 800 210 Φ 270×H 235 L 120×w 70 Φ 13×H 800
DH.WHM12236 DH.WHM12246 6.000 Φ21,5×H24 800 210 Φ 270×H 235 L 120×w 70 Φ 13×H 800
DH.WHM122361 DH.WHM122461 7.000 Φ21,5×H25 850 210 Φ 270×H 235 L 120×w 70 Φ 13×H 800
DH.WHM12237 DH.WHM12247 10.000 Φ21,5×H33 1.400 250 Φ 325×H 270 L 120×w 70 Φ 13×H 800
DH.WHM122371 DH.WHM122471 10.000 Φ24×H31 1.400 250 Φ 325×H 270 L 120×w 70 Φ 13×H 800
Catalog No. FlaskCapacity
(Lit.)
Flask Dia. ΦΦ(cm)
Watts(kW)
Inside Depth(mm)
Mantle OutsideΦΦ××H (mm)
BottomOutlet
(Hole)L××w (mm)
Support Rod
ΦΦ××H (mm)with 230 V with 110 V
DH.WHM12238 DH.WHM12248 20 Φ27×H45 2 360 Φ 390×H 410 L 120×w 70 Φ 13×H 800DH.WHM122381 DH.WHM122481 20 Φ29×H42 2 360 Φ 390×H 410 L 120×w 70 Φ 13×H 800
DH.WHM12239 DH.WHM12249 50 Φ31,5×H81 4 720 Φ 470×H 800 L 120×w 70 Φ 13×H 800
DH.WHM12240 DH.WHM12250 100 Φ41,5×H91 6 800 Φ 570×H 850 L 120×w 70 Φ 13×H 800
59
HeHeating, Electric Mantle
““witeg””WiseTherm��WHM Reaction Vessel Heating Mantle with Bottom-Outlet Nickel Chrome Heating Element, for Cylindrical, K-type Thermo-sensor Integrated, 0,5 ~ 100 Lit. 450 ℃
Analog Compact Controller &Digital Feedback Controller
(Optional, See page 62)WHM-C10D WHM-C10A
With Aluminum Case, 0.5~10 Lit.
With Steel Case, 20~100 Lit., Not available to use with Magnetic Stirrers
※ Customized Vessel Like Diameter (Φ)×Height (cm) or Inside Depth (mm) can be Offered
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time■ Optional Remote Thermo Controllers are available
(Analog : WHM-C10A, Digital : WHM-C10D)■ CE Certified
■ K-type Thermo Sensor is Basically Embedded (Except Fabric Mantles) which Enables Precise Control of the Mantles when used together with Remote Digital Controller
■ External Thermo Sensor is Available, which Enables Precise Control of the Temperature of Liquid Sample in the Vessel when used together with Remote Digital Controller
Reaction Vessel Heating Mantle with Bottom-Outlet(WHM12233)
Realize Precise TemperatureControl by Integrated
K-type Thermo-sensor
Integrated White K-type Thermo-sensor(Deal Drawing)
Nickel Chrome HeatingElement - Coil Type
Reaction Vessel Heating Mantle
with Bottom Outlet
450 ℃
● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)
● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)
(Deal Drawing)(Deal Drawing)
Prices are Subject to Change without Notice. 60
““witeg””WiseTherm��WHM Aluminum-case Stirrer Reaction Vessel Heating Mantles with ControllerNickel Chrome Heating Element, Stirring & Temperature Controllers, For Cylindrical, 500 ~ 7.000 ml, 450 ℃
““witeg””WiseTherm��WHM Fabric-Housed Reaction Vessel MantlesNickel Chrome Heating Element, for Cylindrical 0,5 ~ 7 Lit, 450 ℃
Stirrer Reaction Vessel Mantles with Controller(WHM722101)
Fabric-Housed Reaction Vessel Mantles(WHM12252)
Al-Case Stirrer Reaction Vessel Heating Mantle with Controller
Fabric-housed Reaction Vessel Mantle
50~750rpm, 450℃ 450℃
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time■ CE Certified
■ External Thermo Sensor is (K-type) Available, which EnablesPrecise Control of the Temperature of Liquid Sample in the Vesselwhen used together with Remote Digital Controller
■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Nickel Chrome Heating Element - Coil Type
: Acid-Resistant, Long Life Time■ Optional Remote Thermo Controllers are Available
(Analog : WHM-C10A, Digital : WHM-C10D)
■ External Thermo Sensor is (K-type) Available, which EnablesPrecise Control of the Temperature of Liquid Sample in the Vesselwhen used together with Remote Digital Controller
■ CE Certified
Analog Compact Controller &Digital Feedback Controller(Optional, See page 62)
WHM-C10D
WHM - C10A
● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)
Catalog No. FlaskCapacity
(ml)
Flask Dia. ΦΦ (cm)
Watts(W)
Inside Depth (mm)
Mantle OutsideΦΦ××H (mm)
Support Rod ΦΦ××H (mm)with 230 V with 110 V
DH.WHM722100 DH.WHM12210A 500 Φ 11×H 10 240 72 Φ 190×H 165 Φ 13×H 660
DH.WHM722101 DH.WHM12210B 1.000 Φ 11×H 15 350 107 Φ 270×H 200 Φ 13×H 660
DH.WHM722102 DH.WHM12210C 2.000 Φ 13×H 19 450 142 Φ 270×H 235 Φ 13×H 660
DH.WHM722103 DH.WHM12210D 3.000 Φ 13×H 28 550 177 Φ 325×H 270 Φ 13×H 800DH.WHM722104 DH.WHM12210E 5.000 Φ 16×H 29 800 177 Φ 325×H 270 Φ 13×H 800
DH.WHM722105 DH.WHM12210F 6.000 Φ 21,5×H 24 800 177 Φ 325×H 270 Φ 13×H 800
DH.WHM722106 DH.WHM12210G 7.000 Φ 21,5×H 25 850 177 Φ 325×H 270 Φ 13×H 800
Catalog No.Vessel
Capacity (ml)Vessel dia.
ΦΦ××height (cm)Watts(W)
Inside Depth (mm)
Mantle OutsideΦΦ××H (mm)with 230 V with 110 V
DH.WHM12251 DH.WHM12261 500 Φ 11×H 10 240 75 Φ 160×H 100
DH.WHM12252 DH.WHM12262 1.000 Φ 11×H 15 350 115 Φ 160×H 140
DH.WHM12253 DH.WHM12263 2.000 Φ 13×H 19 450 145 Φ 185×H 165
DH.WHM12254 DH.WHM12264 3.000 Φ 13×H 28 550 210 Φ 185×H 235
DH.WHM12255 DH.WHM12265 4.000 Φ 16×H 26 700 210 Φ 220×H 235
DH.WHM12256 DH.WHM12266 5.000 Φ 16×H 29 800 210 Φ 220×H 235
DH.WHM12257 DH.WHM12267 6.000 Φ 21,5×H 24 800 210 Φ 290×H 235
DH.WHM12258 DH.WHM12268 7.000 Φ 21,5×H 25 850 210 Φ 290×H 235
Heating, Electric Mantle He
www.witeg.de 61
““witeg””WiseTherm��WHM Analog Aluminum-case Multi Heating Mantles, with 3 & 6 PlacesBuilt-in Analog Controller, Lower Profile, Indel for Extracting∙Refluxing∙Distilling Applictions, 250~1.000 ml, 450 ℃
■ Lower Profile for Space-saving Convenience■ Ideal for Repetitive Extracting(Kjeldahl, Soxhlet, and other Extraction
Procedure), Refluxing and Distilling Laboratory Applications■ Analog Controller Built-in System■ Rods and Clamps are Offered as Standard■ Ideal for DURAN/Kimax /Pyrex & Iwaki-brand Round Flasks
■ Highly-processed Aluminum Case Offers Robust Standing, Easy Handling
■ Nickel Chrome Heating Element - Coil Type : Acid-Resistant, Long Life Time
■ CE Certified
Analog 6 places Heating Mantles(WHM12293)
Analog 3 places Heating Mantles (WHM12391)
Premium Analog Multi Heating Mantles
Highly-processed Aluminum CaseNickel Chrome Heating Element
6 places Analog Multi Heating Mantle, 250 ml, 300 ml & 500 ml, 450 ℃
3 places Analog Multi Heating Mantle, 500 ml & 1.000 ml, 450 ℃
※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex
1.000 mm
Catalog No.Flask Capacity
(ml)
Flask
Watts(W)Inside
Depth (mm)Dimension
W××D××H (mm)with 230V with 110V Max.Dia. ΦΦ (mm)
Bottom
DH.WHM12291 DH.WHM12292 250/300 83 ~ 86 Flat 840 50 800××240××110DH.WHM12293 DH.WHM12294 250/300 83 ~ 86 Round 840 50 800××240××110
DH.WHM12295 DH.WHM12296 500 102 ~ 105 Round 1.440 65 950××270××130
Catalog No.Flask Capacity
(ml)
Flask
Watts(W)Inside
Depth (mm)Dimension
W××D××H (mm)with 230V with 110VMax.
Dia. ΦΦ (mm)Bottom
DH.WHM12391 DH.WHM12392 500 102 ~ 105 Round 720 65 550××270××130
DH.WHM12393 DH.WHM12394 1.000 130 ~ 133 Round 1.050 75 690××340××170
HeHeating, Electric Mantle
witeg Labortechnik GmbH62
Heating, Electric Mantle He
““witeg””WiseTherm��WHM-C10A Analog Compact Temperature ControllerEconomical Controller for All-Purpose Heating Instruments, Solid State, Proportional Voltage Power Control (5~100 %)
Analog Compact Controller (WHM - C10A)
Analog Compact Controller■■ Small Footprint, Compact Analog Temperature Controller ■■ Precise Manual Control of Heating Mantles, Tapes, Cords and Other
Resistive Loads up to 1,2 kW■■ CE Certified
Application & Features� Small Footprint, Compact Analog Temperature Controller. � Safe and Durable Design.� Solid state, Proportional Voltage Power Control. (5~100 % or Rated Voltage)� Precise Manual Control of Heating Mantles, Tapes, Cords and Other Resistive Loads up to 1,2 kW.� CE Certified.
Model WHM-C10A
Control Range 5~100 % of Rated VoltageController Analog Phase ControllerControl Capacity Up to 1,2 kW
Dimension (w××d××h) (mm) 160×128×145Weight 1 kgOthers CE Certified
Packing Dimension (w××d××h) (mm) 190×160×130Gross Weight 2 kgPower plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Specification
Ordering InformationDH.WHM13500 All-Purpose Analog Controller, WHM-C10A,
5~100 % of Rated Voltage, for up to 1,2 kW Heating Instruments
““witeg””WiseTherm��WHM-C10D Digital Feedback Temperature Controllerwith External Direct Contact Temperature Sensor(Optional), for All-purpose Heating Instruments
<Temp. K-type Sensor : SS300/SS310/SS400/SS410>
<Stand Rod:RD300>
<Holder +Clamp:CL220>
Example of Heating Mantle Set with the Digital Controller
Example of Heating Mantle Set with the Analog Controller
Digital Feedback Controller (WHM-C10D)
Mode Button
Two Line Back LightLCD Display
Turn+PushJog-Shuttle
Ambient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ Control
Model WHM-C10D
Temp.Range Ambient +5 ~ 750 ℃Accuracy ±1 ℃ at Set Temperature
Temp. Control Resolution 1 ℃Controller Digital Feedback Controller with Jog Shuttle Switch (Turn+Push)Control Capacity Up to 2 kWDisplay Digital LCD Display with Back Light Function (Temp., Timer)Timer 99 hr 59 min, (Continuous function included)Dimension (w××d××h) (mm) 206×307×99Weight 2,8 kg
Others
CE Certified, Storage Function (Temp., Timer),Locking Mode (Jog-Shuttle Input disabled)
User Self-compensation functionAlarm ( Error Status and Timer-end )
Packing Dimension (w××d××h) (mm) 280×250×110Gross Weight 4 kgPower plug type Hybrid E+FPower Supply� AC 230 V, 50 / 60 Hz
■■ User’s Self-compensation Function : to Control Difference Between Real Temp. and Indicated Temp. (±±10,0 ℃℃)
■■ Patented Jog-Shuttle Control System ■■ CE Certified
Application & Features� Digital Feedback Control by High-Performance Microprocessor.� Digital LCD Display with Back-Light Function.� Small Footprint and User-Friendly Design. � Heating Instruments can be controlled up to 2 kW.� Accurate Temp.Control of the Liquid in the Vessel using Optional Direct K-type Sensor.� User’s Self-compensation Function :
to Control Difference Between Real Temp. and Indicated Temp. (±10,0 ℃)� Storage function, Timer, Alarm & Locking Mode. � Patented Jog-Shuttle Control System.� CE Certified.
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
<Continued on Next Page>
www.witeg.de 63
HeHeating, Electric Mantle
Ordering Information
DH.WHM12500 All-Purpose Digital Controller, WHM-C10D, Ambient + 5 ~ 750 ℃, for up to 2 kW Heating Instrumentes
Optional Accessories DH.WHP503037 Stand Rod, RD300, for Heating Mantles, Φ12,7×520 mmDH.WHP503040 Direct Contact Temperature Sensor, SS300, K-type, 330 mm total length, 250 mm probe length, with PlugDH.WHP503041 Direct Contact Temperature Sensor, SS310, K-type, Teflon Coated, 330 mm total length, 250 mm probe length, with PlugDH.WHP503050 Direct Contact Temperature Sensor, SS400, K-type, 380 mm total length, 300 mm probe length, with PlugDH.WHP503051 Direct Contact Temperature Sensor, SS410, K-type, Teflon Coated, 380 mm total length, 300 mm probe length, with Plug
DH.WHP503012 Holder + Clamp for Temp Sensor, CL220
““witeg””WiseTherm��WHM Heating Tapes, Standard-type, 250 ℃, 13 &25 mm Width
� For Glass Tubes Metal Pipet
Heating Tapes
““witeg””WiseTherm�� WHM Custom Heating Mantles & Insulation Bottom Valved Vessels or General-use, Up to 450 ℃~650 ℃
We can Offer witeg Custom Heating Mantles, for which you can Specify the Outside Diameter of the Vessel, Length of Mantle, Voltage,Number of Circuits and Length of Each Heating Zone, Operating Temperature, Unusual Ambient Conditions,Size & Location of Holes for View Ports, and Tubulations.
Please Submit a Sketch for Complicated Applications and Contact our International Sales Team ([email protected]) or our Distributor in your Country.
- Provides Uniform Heating and Insulation for Scrubbing and Fractionating Columns. - Closes with a Zipper, with Eyelets and laces or Hooks and laces. - Internal Operating Temperature is up to 450 ℃ or 650 ℃
Examples for Customized Heating Mantles
Heating Tape
<Continued from...““witeg””WiseTherm��WHM-C10D Digital Feedback Controller>
Catalog No. 13 ㎜㎜ Width××Length(m) Watts & Volt
DH.WHM12311 13 ㎜×0,6 m 200 W, 230 VDH.WHM12312 ×1,0 m 200 W, 230 VDH.WHM12313 ×1,5 m 250 W, 230 VDH.WHM12314 ×2,0 m 300 W, 230 VDH.WHM12315 ×2,5 m 350 W, 230 V
DH.WHM12316 ×3,0 m 400 W, 230 V
Catalog No. 13 ㎜㎜ Width××Length(m) Watts & Volt
DH.WHM12321 25 ㎜×0,6 m 200 W, 230 VDH.WHM12322 ×1,0 m 200 W, 230 VDH.WHM12323 ×1,5 m 250 W, 230 VDH.WHM12324 ×2,0 m 300 W, 230 VDH.WHM12325 ×2,5 m 350 W, 230 VDH.WHM12326 ×3,0 m 400 W, 230 VDH.WHM12327 ×4 m 550 W, 230 V
DH.WHM12328 ×6 m 700 W, 230 V
64
●● Homogenizer with Direct Controller●● Digital Homogenizer with Remote Controller●● Homogenizing Stirrer, for use with Tissue Grinders
- Designed for Liquid and Tissue Samples.- Useful for All Dispersing and Homogenizing Applications.- High-speed / High Quality / Low Noise : Max. 27.000 RPM. (without load)- Speed & Power Control Optimized for a Sample.- High Efficiency Dispersing Tool Made of Stainless steel and PTFE.
HG-15D-Set HG-15A-Set HS-30E-Set
▶▶Homogenizer with Direct Controller
▶▶Homogenizing Stirrer, for use with Tissue Grinders
▶▶Digital Homogenizer with Remote Controller
WiseTis��
& WiseStir��
HomogenizersHomogenizers
www.witeg.de 65
HoHomogenizers, Direct Controller
Model HG - 15A
Dimension (w××d××h)(mm) 60 × 75 × 215Working Range 1 ~ 2.500 mlSpeed Max. 27.000 rpm (without load)Speed Adjustment SteplessMotor Rating (Input / Output) 300 / 160 WController Analog Phase ControllerUsable Tool HT1008, HT1010, HT1018 & HT1025
MaterialBody Aluminum Die-casting and ABSTool Stainless Steel (#304)
Extension Arm Diameter 12,7 mmExtension Arm Length 250 mmPermissible Ambient Temperature Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %Safety Device Over Heat ProtectorWeight 2,5 kgOthers CE CertifiedPacking Dimension (w××d××h)(mm) 320×300×190
Gross Weight 5 kgPower Consumption 160 WPower plug type Hybrid E+FPower Supply�� AC 230 V, 50 / 60 Hz
Homogenizer with Direct Controller(HG-15A-Set-B)
““witeg””WiseTis��HG-15A Homogenizer with Direct Controller, up to 27.000 rpmAnalog Stepless Control System, 1~2.500 ml, High-Speed∙High-Quality∙Low Noise, High Efficiency Dispersing Tools
■■ Useful for All Dispersing and Homogenizing Applications■■ Over Heat Protection■■ CE Certified
Application & Features� Designed for Liquid and Tissue Samples.� Useful for All Dispersing and Homogenizing Applications.� High Speed / High Quality / Low Noise : Max. 27.000 RPM (without load)� Speed & Power Control Optimized for the Sample.� High Efficiency Dispersing Tool made of Stainless Steel and PTFE.� Over-Heat Protection.� Low Cost & High Efficiency.� CE Certified.
Ordering InformationDH.WHG02015 Homogenizer HG-15A-Unit, 1~2.500 ml
Analog Controller, without Dispersing Tool
DH.WHG02016 Homogenizer Package, HG-15A-Set-A, with HT1018 Dispersing Tool, CL200 Clamp, and ST110 Standard Plate StandPacking Dimension w 320×d 300×h 190 mm, Gross Weight 11 kg
DH.WHG02017 Homogenizer Package, HG-15A-Set-B, with HT1025 Dispersing Tool, CL200 Clamp, and ST110 Standard Plate StandPacking Dimension w 320×d 300×h 190 mm, Gross Weight 8 kg
Dispersing ToolsDH.WHG02108 Homogenizer Tool, HT1008, Rotor Φ6.1 , Stator Φ8 , 1~50 mlDH.WHG02110 Homogenizer Tool, HT1010, Rotor Φ7,5 , Stator Φ10, 1~100 mlDH.WHG02118 Homogenizer Tool, HT1018, Rotor Φ12,7, Stator Φ18, 10~1.000 mlDH.WHG02125 Homogenizer Tool, HT1025, Rotor Φ17 , Stator Φ25, 50~2.500 ml
Additional Function Accessories※ witeg WiseStir�, WiseTis� AccessoriesDH.WOS502020 CL200, Clamp for Stirrer or Homogenizer, Cast Aluminum,
Grip Capacity Φ 23 mm for Stand / RodDH.WOS501510 ST110, Standard Plate Stand for Stirrer or Homogenizer,
Φ 16×h 800 mm Rod, 20×35 cm Plate, with Silicone PadDH.WOS501515 ST120, Wide Plate Stand for Stirrer or Homogenizer,
Φ 23×h 1.000 mm Rod, 30×40 cm Plate, with Silicone Pad
※※ See page 67 for the Specifications of Dispersing Tools and Accessories.
Clamp (CL200)
Homogenizer(HG-15A-Unit) Analog Stepless
Control System
Tool (HT1018)
Stand & Rod Set(ST110)
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
witeg Labortechnik GmbH66
Homogenizers, Remote Digital ControllerHo
Model HG -15D
Dimension (w××d××h) (mm) 60 × 75 × 215Working Range 1 ~ 2.500 mlSpeed 2.000 ~ 27.000 rpm (without load)Speed Control Resolution 10 rpmMotor Rating (Input / Output) 300 / 160 WController Digital Feedback Controller (Remote Type)Cable Length of Remote Controller 1,8 mDisplay Digital LCD Display with Back-Light FunctionUsable Tool HT1008, HT1010, HT1018 & HT1025
MaterialBody Aluminum Die-Casting and ABSTool Stainless Steel (#304)
Extension Arm Diameter 12,7 mmExtension Arm Length 250 mmPermissible Ambient Temperature Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %Safety Device Over Load & Over Heat ProtectorWeight 2,5 kgOthers CE CertifiedPacking Dimension (w××d××h) (mm) 580×340×230
Gross Weight 6 kgPower Consumption 160 WPower plug type Hybrid E+FPower Supply�� AC 230 V, 50 / 60 Hz
Ordering InformationDH.WHG02018 Homogenizer HG-15D-Unit, 1~2.500 ml, with Remote Controller, without ToolDH.WHG02019 Homogenizer Package, HG-15D-Set-A, with Remote Controller,
HT1018 Tool, CL200 Clamp and ST110 StandPacking Dimension w 580×d 340×h 230 mm, Gross Weight 18 kg
DH.WHG02020 Homogenizer Package, HG-15D-Set-B with Remote Controller, HT1025 Tool, CL200 Clamp and ST110 Stand Packing Dimension w 580×d 340×h 230 mm, Gross Weight 15 kg
Dispersing ToolsDH.WHG02108 Homogenizer Tool, HT1008, Rotor Φ6,1 , Stator Φ8 , 1~50 mlDH.WHG02110 Homogenizer Tool, HT1010, Rotor Φ7,5 , Stator Φ10, 1~100 mlDH.WHG02118 Homogenizer Tool, HT1018, Rotor Φ12,7, Stator Φ18, 10~1.000 mlDH.WHG02125 Homogenizer Tool, HT1025, Rotor Φ17 , Stator Φ25, 50~2.500 ml
Additional Function Accessories※ witeg WiseStir�, WiseTis� Accessories
DH.WOS502020 CL200, Clamp for Stirrer or Homogenizer,Cast Aluminum, Grip Capacity Φ 23 mm for Stand / Rod
DH.WOS501510 ST110, Standard Plate Stand for Stirrer and Homogenizer, Φ 16×h 800 mm Rod, 20×35 cm Plate, with Silicone Pad
DH.WOS501515 ST120, Wide Plate Stand for Stirrer and Homogenizer,Φ 23×h 1000 mm Rod, 30×40 cm Plate, with Silicone Pad
※※ See page 67 for the Specifications of Dispersing Tools and Accessories.
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseTis��HG-15D Homogenizer with Remote Digital Controller, 2.000~27.000 rpmMicroprocessor Digital-Control and LCD of Speed & Power, 1~2.500 ml, High-Efficiency Dispersing Tools
Clamp (CL200)
Homogenizer(HG-15D-Unit)
Tool(HT1018)
Stand & Rod Set(ST110)
Remote DigitalController
Homogenizer with Remote Digital Controller (HG-15D-Set-B)
■■ Patented Jog-Shuttle Control System■■ CE Certified
Application & Features� Designed for Liquid and Tissue Samples.� Useful for All Dispersing and Homogenizing Applications.� High Speed / High Quality / Low Noise : Max. 27.000 RPM (without load)� Remote Digital Controller : Fully Digital Control Using Microprocessor.� Speed & Power Control Optimized for the Sample.� LCD Display of Speed(RPM) and Power Bar Graph.� High Efficiency Dispersing Tool made of Stainless Steel and PTFE.� Over-Load & Over Heat Protection. � Low Cost & High Efficiency.� Patented Jog-Shuttle Control System.� CE Certified.
www.witeg.de 67
HoHomogenizers, Accessories
DH.WHG02108 (1) Homogenizer Tool, HT1008Rotor Φ 6,1, stator Φ 8, 1~50 ml
DH.WHG02110 (2) Homogenizer Tool, HT1010Rotor Φ 7,5, stator Φ 10, 1~100 ml
DH.WHG02118 (3) Homogenizer Tool, HT1018Rotor Φ 12,7, stator Φ 18, 10~1.000 ml
DH.WHG02125 (4) Homogenizer Tool, HT1025Rotor Φ 17, stator Φ 25, 50~2.500 ml
Additional Function Accessories� WiseStir�, WiseTis� Accessories
DH.WOS502020 (5) High Quality Clamp, CL200,Cast Aluminum, Grip Capacity, Φ 23 mm for Stand / Rod
DH.WOS501510 (6) Standard Plate Stand, ST110, for Stirrer and HomogenizerΦ 16×h 800 mm Rod, RD501, 20×35 cm Plate, with Silicone Pad
DH.WOS501515 (7) Wide Plate Stand, ST120, for Stirrer and HomogenizerΦ 23×h 1.000 mm Rod, RD522, 30×40 cm Plate, with Silicone Pad
(6) Standard Plate Stand (ST110) (7) Wide Plate Stand (ST120)
(4) Dispersing Tool (HT1025)
(2) Dispersing Tool (HT1010)
(3) Dispersing Tool (HT1018)
(1) Dispersing Tool (HT1008)
1~50 ml 1~100 ml
10 ~1.000 ml 10~2.500 ml
Stainless Steel Rods
Steel Retort Base Duo Stand
““witeg””WiseStir�� High-Quality, Stainless Steel (#304) Rod for Plate Stand, Φ16 / 23 mm
DH.WOS502001 Stainless steel Rod, RD501, Φ16×h 800 mm, non-screwDH.WOS502002 Stainless steel Rod, RD502, Φ16×h 1.000 mm, non-screwDH.WOS502003 Stainless steel Rod, RD503, Φ16×h 1.200 mm, non-screw
DH.WOS502011 Stainless steel Rod, RD511, Φ16×h 800 mm, screwDH.WOS502012 Stainless steel Rod, RD512, Φ16×h 1.000 mm, screwDH.WOS502013 Stainless steel Rod, RD513, Φ16×h 1.200 mm, screw
DH.WOS502021 Stainless steel Rod, RD521, Φ23×h 800 mm, screwDH.WOS502022 Stainless steel Rod, RD522, Φ23×h 1.000 mm, screwDH.WOS502023 Stainless steel Rod, RD523, Φ23×h 1.200 mm, screw
Model HT1008 (1) HT1010 (2) HT1018 (3) HT1025 (4)
Working Range 1 ~ 50 ml 1 ~ 100 ml 10 ~ 1.000 ml 50 ~ 2.500 mlStator Diameter 8 mm 10 mm 18 mm 25 mmRotor Diameter 6,1 mm 7,5 mm 12,7 mm 17 mm
Gap between Rotor and Stator 1,9 mm 2,5 mm 5,3 mm 8 mm
Allowable Speed Max. 27.000 rpm 20.000 rpm 15.000 rpmImmersion Depth Min. 35 mm 60 mmImmersion Depth Max 70 mm 130 mmShaft Length 138 mm 225 mmBearing Material PTFESuitable for Solvent YesMax. Temperature 180 ℃Sterilization Method All MethodsSuspensions 10 ~ 50 ㎛Emulsions 1 ~ 10 ㎛
Steel Retort Base Duo Stand, up to Φ16 ㎜ Rods, for 2 RodsNonskid Feet equipped, with Hinged Screw M6, Rod Excluded
� Can Fix Rods up to 2 ea (Below Φ 16 mm) � Stand Thickness : 8 mm
Ordering InformationUS.2040 Stand, US2040, r =150 mmUS.2041 Stand, US2041, r =185 mm
r
(5) High Quality Clamp (CL200)
Homogenizaer Accessories, Dispersing Tools & Plate Stand forWiseStir�&WiseTis�
■■ Accurate Stator && Rotor made of Stainless Steel■■ High Efficiency Dispersing Tool made of Stainless Steel and PTFE■■ Low Cost & High Efficiency
** TTeesstt CCoonnddiittiioonn :: 11,,88 lliitteerrss ooff wwaatteerr iinn tthhee 22 lliitteerrss ccaappaacciittyy bbeeaakkeerr..
witeg Labortechnik GmbH68
Homogenizers, Homogenizing StirrerHo
Ordering InformationStirrer Unit OnlyDH.WOS01010 Homogenizing Stirrer, HS-30E-Unit Only, 200~5.000 rpm
DH.WOS01011 Homogenizing Stirrer Package, HS-30E-Set, with CL200 Clamp and ST110 Standard Plate StandPacking Dimension w 320×d 300×h 190 mm, Gross Weight 10 kg
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
““witeg””WiseStir��HS-30E Homogenizing Stirrer, for Use with Tissue GrindersAnalog Phase Control, 200~5.000 rpm
Analog PhaseControl
Clamp (CL200)
Stand & Rod Set(ST110)
For Use with Tissue Grinders(Tissue Grinder not Included)
Homogenizing Stirrer (HS-30E-Set)
■■ Ideal for usage with Tissue Grinders■■ Over Heat Protection■■ CE Certified
Application & Features� Designed for Most Laboratory Applications such as Homogenizing or Mixing.� Compact Unit with Solid State Speed Control.� Ideal for usage with Tissue Grinders.� Over Heat Protection.� CE Certified.
Homogenizing Stirrer(HS-30E)
Model HS -30E
Dimension (w××d××h) (mm) 90×145×180
Speed Range 0 ~ 5.000 rpm
Maximum Torque 85 Ncm
Stirring Quantity Max. 10 Lit.
Motor Rating (Input / Output) 83 / 75 W (1 / 10 HP)
Controller Analog Phase Controller
Safety Device Over Heat Protector
Weight 3,5 kg
Others CE Certified
Packing Dimension (w××d××h) (mm) 320×300×190
Gross Weight 5 kg
Power Consumption 75 W
Power plug type Hybrid E+F
Power Supply��
AC 230 V, 50 / 60 Hz
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ggrriinnddeerrss iinn oouurr ggeenneerraall ccaattaalloogguuee oonn ppaaggee :: 330077
※ Note!The Package does not Include a Tissue Grinder
●● Hotplates ●● Hotplate Stirrers
HP-20D
MSH-20D-Set
MSH-55A
69
MSH-50D-Set
- Smart Design of Body.- Superior Temperature Uniformity.- Long Life Power & Mechanism.- High Stability in Very Low & High-Speed/-Temperature.
The World Best Qualitywith Cost-Effectiveness!!
▶▶Compact & Round Plate TypeHotplate Stirrers
▶▶Digital Hotplate
▶▶Analog Hotplate Stirrer
▶▶Digital Hotplate Stirrer
WiseStir��
& WiseTherm��
Hotplates& Stirrers
Hotplates& Stirrers
MSH-20A
www.witeg.de
witeg Labortechnik GmbH70
HotplatesHo
Model HP-20A HP-30A
Plate Size (mm) 180×180 260 ×260
Temp. Range Max. 380 ℃
Heating Power 600 W 1.000 W
Controller Superior Linearity PWM Controller
Heating PlateSpecially Designed Heating Module
(High Uniformity : Temp. Difference 10 % less)
Permissible Ambient Temperature Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %
MaterialPlate Ceramic Coated Aluminum (Chemical / Acid Resistance)
Body Powder Coated Aluminum Powder Coated Steel
Dimension (w××d××h) (mm) 206×307×99 286×387×99
Weight 2,8 kg 3,3 kg
Others CE Certified
Packing Dimension (w××d××h) (mm) 400×280×200 430×320×200
Gross Weight 5 kg
Power Consumption 600 W 1 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
Specification
Premium Hotplate (HP-20A)
Premium Hotplate, Large Type (HP-30A)
““witeg””WiseTherm��HP-20A/HP-30A Premium Hotplate, Ceramic-Coated Plate up to 380 ℃, 180×180 mm / 260×260 mm
■■ Excellent for Sample Drying and Most General Lab Heating Applications■■ Superior Temperature Uniformity : Less than 10 % on the Plate at
Ambient Temperature■■ CE Certified
Application & Features� Excellent for Sample Drying and most General lab Heating Applications.� Smart Design of Body made by Aluminum Die-Casting. (HP-20A)� Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature.� Superior Linearity for Control Temperature by Specially Designed Control Circuitry. (PWM control)� Ceramic Coated Plate - Chemical / Acid Resistance.� CE Certified.
Ordering InformationDH.WHP03120 Hotplate, HP-20A, 180×180 mm, Max. 380 ℃DH.WHP03121 Hotplate, HP-30A, 260×260 mm, Max. 380 ℃
Additional Function AccessoriesDH.WHP503011 Stand Rod, RD100, Stainless Steel,
Φ12,7×450 mm, for HP-30A / 30D, MSH-30A / 30DDH.WHP503036 Stand Rod, RD200, Stainless Steel,
Φ12×L450 mm, for HP-20A / 20D, MSH-20A / 20DMSH-50A / 55A, MSH-50D / 55D and SMHS
DH.WHP503012 Holder + Clamp, CL220, for Temperature Sensor
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
180 mm
PWM ControlSystem
Ceramic CoatedPlate
180 mm
260 mm260 mm
~380℃
~380℃
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg bbeeaakkeerrss aanndd ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3333,, 3344,, 229933--229966..
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ssttiirrrriinngg bbaarrss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 336622,, 336633..
www.witeg.de 71
HoHotplates
Model HP-LP1 HP-LP2
Plate Surface Ceramic-Coated Anodized
Plate Size 310×620 mm
Temp.Range Max. 320 ℃
Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)
Temp. Display Resolution 0,1 ℃
Temp. Control Resolution 0,5 ℃
Heating Power 2 kW
Heating PlateSpecially Designed Heating Module
(High Uniformity : Temp. Difference 10 % less)
Permissible Ambient Temperature Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %
ControllerDigital PID Controller with Jog Shuttle Switch (Turn + Push)
Remote Controller Available
Display Digital LCD Display (Temp., Timer)
Timer 99 hr 59 min (Continuous Function Included)
Dimension (w××d××h) (mm) 670×360 ×150
Weight 12.2 kg
Others
CE Certified, Storage Function (Temp., Timer)Locking Mode (Jog-Shuttle Input disabled)
User Self-compensation functionAlarm (Error Status and Timer-end)
Power Consumption 2 kW
Packing Dimension (w××d××h) (mm) 750×430×220
Gross Weight 14 kg
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
Large Digital Hotplate (HP-LP1)
““witeg””WiseTherm��HP-LP Large Digital Hotplate, Anodized or Ceramic-Coated PlateBuilt-in Digital PID Controller or Remote Controller, Superior Temperature Unformity, 310×620 mm, up to 320 ℃
620 mm
Ceramic CoatedPlate
310 mm
Specification
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
■■ Superior Temperature Uniformity : Less than 10 % on the Plate atAmbient Temperature
■■ Digital PID Controller■■ Patented Jog-Shuttle Control System and Back-Light LCD Display■■ CE Certified
Application & Features� Excellent for Sample Drying and most General lab Heating Applications.� Large Heating Area : Ideal for TLC Plate Heating and Surface Heating in Electronic Industries.� Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature.� Ceramic Coated Plate -Chemical /Acid Prevention. (HP-LP1)� Anodized Plate - Scratch Resistance. (HP-LP2)� The Remote Controller Cable helps to put the Controller away from the Hotplate up to 1.5m distance.� Maximum Temperature of 320 ℃� Digital PID Control.� Patented Jog-Shuttle Control System and Back-Light LCD Display. � CE Certified.
Ordering InformationLarge Digital Hotplate, Built-in Digital PID ControllerDH.WHP03024 Large Digital Hotplate, Ceramic-Coated, HP-LP1, 620×310 mm, 320 ℃DH.WHP03027 Large Digital Hotplate, Anodized, HP-LP2, 620×310 mm, 320 ℃
Large Digital Hotplate, Separated Remote ControllerDH.WHP03025 Large Digital Hotplate, Ceramic-Coated, HP-LP-C-Set
620×310 mm, 320 ℃, Digital Remote ControllerPacking Dimension w 750×d 430×h 220 mm, Gross Weight 20 kg
DH.WHP03028 Large Digital Hotplate, Anodized, HP-LP-A-Set620×310 mm, 320 ℃, Digital Remote ControllerPacking Dimension w 750×d 430×h 220 mm, Gross Weight 20 kg
Patented Jog-ShuttleControl System
Large Digital Hotplate with Remote Controller (HP-LP-A-Set)
620 mm
AnodizedPlate
Remote Controller
310 mm
1,5 m Cable
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
~320℃
~320℃
witeg Labortechnik GmbH72
HotplatesHo
<Continued on Next page>
260 mm260 mm
~380 ℃
Model HP- 20D HP- 30D
Plate Size (mm) 180×180 260×260
Temp.Range Max. 380 ℃
Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)
Temp. Display Resolution 0,1 ℃
Temp. Control Resolution 0,5 ℃
Heating Power 600 W 1 kW
Heating PlateSpecially Designed Heating Module
(High Uniformity : Temp. Difference 10% less)
Permissible Ambient Temperature
Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %
Controller Digital Feedback Controller with Jog Shuttle Switch (Turn + Push)
Display Digital LCD Display with Back-Light Function
Timer 99 hr 59 min (Continuous Function Included)
MaterialPlate Ceramic Coated Aluminum (Chemical / Acid Resistance)
Body Powder Coated Aluminum Powder Coated Steel
Dimension (w××d××h) (mm) 206×307 ×99 286×387×99
Weight 2,8 kg 3,2 kg
Others
CE CertifiedStorage Function (Temp., Timer)
Locking Mode (Jog-Shuttle Input Disabled)User Self - compensation Function
Alarm (Error Status and Timer -end)
Power Consumption 600 W 1 kW
Packing Dimension (w××d××h) (mm) 400×280×200 430×320×200
Gross Weight 5 kg
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
Specification
Digital Precise Hotplate (HP-20D-Set)
Digital Precise Hotplate, Large Type (HP-30D)
““witeg””WiseTherm��HP-D Digital Precise Hotplate, Ceramic-Coated PlateDigital Feedback Control, Back Light LCD, up to 380 ℃, ±0,3 ℃, 180×180 mm /260×260 mm
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Holder+Clamp(CL220)
Temp. Sensor(SS220)
Rod (RD200)
180 mm180 mm
Back Light LCD Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
■■ Patented Jog-Shuttle Control System■■ CE Certified
Application & Features� Digital Feedback Control by High-Performance Microprocessor.� Smart Design of Body made by Aluminum Die-Casting. (HP-20D)� Ceramic Coated Plate-Chemical/Acid Resistance.� Superior Temperature Uniformity : 10 % less on the Plate at Ambient Temperature.� Accurate Temp. Control of the Sample in the Vessel using Optional PT100 Sensor.� Digital LCD Display with Back-Light Function.� Digital Timer Function Included : 99 hr 59 min Settable.� Storage Function for the Set Values : Temp. and Timer.� Locking Mode for Experimental Safety Supported. (Input to Jog Shuttle can be disabled)� User’s Self-Compensation Function : to Control Difference between Real Temp. and Indicated
Temp. (±10.0 ℃)� Alarm Function : Error Status and Timer-End.� Patented Jog-Shuttle Control System.� CE Certified.
Ceramic CoatedPlate
~380℃
www.witeg.de 73
HoHotplates
Ordering Information
HP-20D Hotplate Unit & Package SetDH.WHP03020 Digital Hotplate, HP-20D-Unit Only, 180×180 mm, to 380 ℃DH.WHP03021 Digital Hotplate Package, HP-20D-Set
with SS200 External Temp. Sensor, RD200 Support Rod and CL220 ClampPacking Dimension w 400×d 280×h 200 mm, Gross Weight 5 kg
HP-30D Hotplate Unit & Package SetDH.WHP03022 Digital Hotplate, HP-30D-Unit Only, 260×260 mm, to 380 ℃DH.WHP03023 Digital Hotplate Package, HP-30D-Set
with SS100 External Temp. Sensor,RD100 Support Rod and CL220 ClampPacking Dimension w 430×d 320×h 200 mm, Gross Weight 5 kg
Additional Function AccessoriesDH.WHP503020 Direct Contact Temperature Sensor, SS100,
PT100�, for HP-30D, MSH-30D and SMHSDH.WHP503021 Direct Contact Temperature Sensor, SS110,
PT100�, Teflon Coated, for HP-30D, MSH-30D and SMHS
DH.WHP503030 Direct Contact Temperature Sensor, SS200, PT100�, for HP-20D, MSH-20Dand MSH-50D / 55D
DH.WHP503031 Direct Contact Temperature Sensor, SS210, PT100�, Teflon Coated, for HP-20D, MSH-20D and MSH-50D / 55D
DH.WHP503011 Stand Rod, RD100, Stainless Steel, Φ 12,7×450 mm, for HP-30A/30D, MSH-30A / 30D
DH.WHP503036 Stand Rod, RD200, Stainless Steel, Φ 12×L 450 mm, for HP-20A/20D, MSH-20A / 20D, MSH-50A / 55A, MSH-50D/55D and SMHS
DH.WHP503012 Holder +Clamp, CL220, for Temp. Sensor
�PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of ±0.3 ℃
<Teflon Coated PT100 Sensor : SS110/SS210>
<Temp. PT100 Sensor : SS100/SS200>
<Stand Rod:RD100/RD200>
<Holder +Clamp:CL220>
<Continued from...““witeg””WiseTherm��HP-D Digital Precise Hotplate >
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg bbeeaakkeerrss aanndd ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3333,, 3344,, 229933--229966..
witeg Labortechnik GmbH74
Hotplates StirrersHo
Model MSH-20A MSH-30A
Plate Size (mm) 180×180 260×260Stirring Capacity (H2O) Max. 20 Lit.
Motor Rating 9 / 4W
Speed Range Max. 1.500 rpm
Temp. Range Max. 380 ℃
Heating Power 600 W 1.000 W
Controller Superior Linearity PWM Controller
Heating PlateSpecially Designed Heating Module
(High Uniformity : Temp. Difference 10 % less)
Permissible Ambient Temperature Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %
Max. Length of Stirring Bar 50 mm
MaterialPlate Ceramic Coated (Chemical / Acid Resistance)
Body Powder Coated Aluminum Powder Coated Steel
Dimension (w××d××h) (mm) 206×307×99 268×387×99Weight 2,8 kg 3,3 kg
Others CE Certified
Packing Dimension (w××d××h) (mm) 400×280×200 430×320×200
Gross Weight 5 kg
Power Consumption 600 W 1 kW
Power plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
SpecificationPremium Hotplate Stirrer (MSH-20A)
Premium Hotplate Stirrer, Large Type (MSH-30A)
““witeg””WiseStir��MSH-A Premium Hotplate Stirrer, Ceramic-Coated PlatePWM Control System, Superior Temperature Uniformity, Precise Contol of Temp. &RPM, up to 380 ℃, 1.500 rpm, 180×180 mmor 260×260 mm
■■ Superior Temperature Uniformity : Less than 10 % on the Plate atAmbient Temperature
■■ Superior Linearity for the Control of Temperature & Stirring Speed■■ Ceramic Coated Plate-Chemical / Acid Resistance■■ CE Certified
Application & Features� Excellent for Sample Drying and most General Lab Heating Applications.� Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature. � Superior Linearity for Temperature Control & Stirring Speed by Specially Designed
Control Circuitry. (PWM Control)� Smart Design of Body made by Aluminum Die-Casting. (MSH-20A)� Ceramic Coated Plate-Chemical /Acid Resistance.� Maximum Temperature of 380 ℃� CE Certified.
Ordering InformationMSH-20A Hotplate StirrerDH.WMH03120 Hotplate Stirrer, MSH-20A, 180×180 mm,
0~1.500 rpm, to 380℃
MSH-30A Hotplate StirrerDH.WMH03121 Hotplate Stirrer, MSH-30A, 260×260 mm,
0~1.500 rpm, to 380℃
Additional Function AccessoriesDH.WHP503011 Stand Rod, RD100, Stainless Steel,
Φ 12,7×450 mm, for HP-30A / 30D, MSH-30A / 30DDH.WHP503036 Stand Rod, RD200, Stainless Steel,
Φ 12×L 450 mm, for HP-20A / 20D, MSH-20A / 20DMSH-50A / 55A, MSH-50D / 55D and SMHS
DH.WHP503012 Holder +Clamp, CL220, for Temperature Sensor
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
180 mm
PWM ControlSystem
Ceramic CoatedPlate
180 mm
~380℃ / 1.500rpm
260 mm260 mm
~380℃ / 1.500rpm
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg bbeeaakkeerrss aanndd ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3333,, 3344,, 229933--229966..
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ssttiirrrriinngg bbaarrss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 336622,, 336633..
www.witeg.de 75
HoHotplates Stirrers
■■ Superior Temperature Uniformity : Less than 10 % on the Plate atAmbient Temperature
■■ Superior Linearity for the Control of Temperature & Stirring Speed■■ Ceramic Coated Plate (MSH-50A) for Chemical/Acid Resistance or
Anodized Plate (MSH-55A) for Scratch Prevention■■ CE Certified
Application & Features� Excellent for Sample Drying and most General Lab Heating Applications.� Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature.� Superior Linearity for Temperature Control & Stirring Speed by Specially Designed
Control Circuitry. (PWM Control)� Smart Design of Body made by Aluminum Die-Casting. � Ceramic Coated Plate (MSH-50A) for Chemical/Acid Resistance or Anodized Plate (MSH-55A)
for Scratch Prevention.� Maximum Temperature of 380 ℃� CE Certified.
Specification
Premium Compact Hotplate Stirrer,Round Type & Anodized Plate
(MSH-55A)
““witeg””WiseStir��MSH-50A Premium Compact Hotplate Stirrer, Round-Type Plate, Φ135 ㎜Ceramic Coated or Anodized Plate, Superior Temperature Uniformity, Precise Control of Temp. & RPM, up to 380 ℃, 1.500 rpm
Ordering InformationMSH-50A Hotplate StirrerDH.WMH03150 Hotplate Stirrer, MSH-50A, Φ135 mm, Ceramic Coated Plate,
0~1.500 rpm, to 380 ℃
MSH-55A Hotplate StirrerDH.WMH03155 Hotplate Stirrer, MSH-55A, Φ135 mm, Anodized Plate,
0~1.500 rpm, to 380 ℃
Additional Function AccessoriesDH.WHP503036 Stand Rod, RD200, Stainless Steel,
Φ 12×L 450 mm, for HP-20A / 20D, MSH-20A / 20DMSH-50A/55A, MSH-50D / 55D and SMHS
DH.WHP503012 Holder +Clamp, CL220, for Temperature Sensor
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
PWM ControlSystem
Anodized PlateΦΦ135 mm
Premium Compact Hotplate Stirrer,Round Type & Ceramic-Coated Plate
(MSH-50A)
Ceramic Coated Plate
Model MSH-50A MSH-55A
Plate Size (mm) Φ 135 Stirring Capacity (H2O) Max. 20 Lit.Motor Rating 9 / 4 WSpeed Range Max. 1.500 rpm
Temp. Range Max. 380 ℃
Heating Power 350 WController Superior Linearity PWM Controller
Heating PlateSpecially Designed Heating Module
(High Uniformity : Temp. Difference 10 % less)
Fixed Safety Circuit 380 ℃
Permissible Ambient Temperature Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mm
MaterialPlate Ceramic Coated AnodizedBody Powder Coated Aluminum
Dimension (w××d××h) (mm) 160×280×95Weight 2,3 kgOthers CE Certified
Packing Dimension (w××d××h) (mm) 400×280×200
Gross Weight 4 kgPower Consumption 350 WPower plug type Hybrid E+F
Power Supply� AC 230 V, 50 / 60 Hz
~380 ℃/ 1.500 rpm
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg bbeeaakkeerrss aanndd ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3333,, 3344,, 229933--229966..
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ssttiirrrriinngg bbaarrss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 336622,, 336633..
witeg Labortechnik GmbH76
Hotplates StirrersHo
<Continued on Next page>
Model MSH-20D MSH-30D
Plate Size (mm) 180×180 260×260
Stirring Capacity (H2O) Max. 20 Lit.Motor Rating 9 / 4 WSpeed Range 80 ~ 1.500 rpmSpeed Control Resolution 5 rpm
Temp.Range Max. 380 ℃Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)
Temp. Display Resolution 0,1 ℃Temp. Control Resolution 0,5 ℃Heating Power 600 W 1.200 W
Heating Plate Specially Designed Heating Module (High Uniformity : Temp. Difference 10 % less)
Permissible Ambient Temperature Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mmController Digital Feedback Controller with Jog Shuttle Switch (Turn + Push)Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)
MaterialPlate Ceramic Coated Aluminum (Chemical / Acid Resistance)Body Powder Coated Aluminum Powder Coated Steel
Dimension (w××d××h) (mm) 206×307×99 286×387×99Weight 3,3 kg 3,5 kg
Others
CE CertifiedStorage Function (Temp., RPM, Timer)
Locking Mode (Jog-Shuttle Input Disabled)User Self -compensation Function
Alarm (Error Status and Timer-end)
Power Consumption 600 W 1,2 kW
Packing Dimension (w××d××h) (mm) 400×280×200 430×320×200
Gross Weight 5 kgPower plug type Hybrid E+FPower Supply * AC 230 V, 50 / 60 Hz
Specification
Digital Precise Hotplate (MSH-20D-Set)
““witeg””WiseStir��MSH-D Digital Hotplate Stirrer, Ceramic-Coated Plate, up to 380 ℃, ±0,3 ℃Digital Feedback Control, Accurate Temperature Control, 180×180 mm / 260×260 mm, 80 ~ 1.500 rpm
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Holder+Clamp(CL220)
Temp. Sensor(SS220)
Rod (RD200)
180 mm180 mm
Back Light LCD Patented Jog-ShuttleControl System
■■ Patented Jog-Shuttle Control System■■ CE Certified
Application & Features� Digital Feedback Control by High-Performance Microprocessor.� Superior Temperature Uniformity : 10 % less on the Plate at Ambient Temperature. � Accurate Temp. Control of the Sample in the Vessel Using Optional PT100 Sensor.� User’s Self -Compensation Function : to Control Difference between Real Temp.
and Indicated Temp. (±10,0 ℃)� Digital LCD Display with Back-Light Function. � Aluminum Die -Casting Body. (MSH-20D)� Ceramic Coated Plate-Chemical /Acid Resistance.� Storage Function : Timer and Alarm.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)� Patented Jog-Shuttle Control System.� CE Certified.
Ceramic CoatedPlate
~ 380℃/ 80~1.500rpm
260 mm260 mm
~380 ℃ / 80~1.500 rpm
Digital Precise Hotplate, Large Type (MSH-30D)
www.witeg.de
HoHotplates Stirrers
77
Ordering InformationMSH-20D Hotplate Stirrer Unit & Package SetDH.WMH03020 Digital Hotplate Stirrer, MSH-20D-Unit Only,
180×180 mm, 80~1.500 rpm, to 380 ℃DH.WMH03021 Digital Hotplate Stirrer Package, MSH-20D-Set
with SS200 External Temp.Sensor, RD200 Support Rod and CL220 ClampPacking Dimension w 400×d 280×h 200 mm, Gross Weight 5 kg
MSH-30D Hotplate Stirrer Unit & Package Set DH.WMH03022 Digital Hotplate Stirrer, MSH-30D-Unit Only,
260×260 mm, 80~1.500 rpm, to 380 ℃DH.WMH03023 Digital Hotplate Stirrer Package, MSH-30D-Set
with SS100 External Temp. Sensor, RD100 Support Rod and CL220 ClampPacking Dimension w 430×d 320×h 200 mm, Gross Weight 5 kg
Additional Function AccessoriesDH.WHP503020 Direct Contact Temperature Sensor, SS100,
PT100��, for HP-30D, MSH-30D and SMHSDH.WHP503021 Direct Contact Temperature Sensor, SS110,
PT100��, Teflon Coated, for HP-30D, MSH-30D and SMHS
DH.WHP503030 Direct Contact Temperature Sensor, SS200, PT100��, for HP-20D, MSH-20D and MSH-50D / 55D
DH.WHP503031 Direct Contact Temperature Sensor, SS210, PT100��, Teflon Coated, for HP-20D, MSH-20D and MSH-50D / 55D
DH.WHP503011 Stand Rod, RD100, Stainless Steel, Φ 12,7×L 450 mm, for HP-30A / 30D, MSH-30A / 30D
DH.WHP503036 Stand Rod, RD200, Stainless Steel, Φ 12×L 450 mm, for HP-20A / 20D, MSH-20A / 20D, MSH-50A / 55A, MSH-50D / 55D and SMHS
DH.WHP503012 Holder +Clamp, CL220, for Temp. Sensor
�PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of ±0,3 ℃
<Continued from...““witeg””WiseStir��MSH-D Digital Hotplate Stirrer>
<Teflon Coated PT100 Sensor : SS110/SS210>
<Temp. PT100 Sensor : SS100/SS200>
<Stand Rod:RD100/RD200>
<Holder +Clamp:CL220>
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg bbeeaakkeerrss aanndd ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3333,, 3344,, 229933--229966..
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ssttiirrrriinngg bbaarrss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 336622,, 336633..
witeg Labortechnik GmbH78
Hotplates StirrersHo
SpecificationModel MSH-50D MSH-55D
Plate Size (mm) Φ 135 Stirring Capacity (H2O) Max. 20 Lit.Motor Rating 9 / 4 WSpeed Range 80 ~ 1.500 rpmSpeed Control Resolution 5 rpm
Temp.Range Max. 380 ℃
Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)Temp. Display Resolution 0,1 ℃Temp. Control Resolution 0,5 ℃Heating Power 350 W
Heating Plate Specially Designed Heating Module (High Uniformity : Temp. Difference 10 % less)
Fixed Safety Circuit 380 ℃
Permissible Ambient Temperature Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mmController Digital Feedback Controller with Jog Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)
MaterialPlate Ceramic Coated AnodizedBody Powder Coated Aluminum
Dimension (w××d××h) (mm) 160 × 280× 95Weight 2,3 kg
Others
CE CertifiedStorage Function (Temp., RPM, Timer)
Locking Mode (Jog-Shuttle Input Disabled)User Self-compensation Function
Alarm (Error Status and Timer-end)
Packing Dimension (w××d××h) (mm) 400×280×200
Gross Weight 4 kgPower Consumption 350 WPower plug type Hybrid E+F
Power Supply * AC 230 V, 50 / 60 Hz
Digital Compact Hotplate Stirrer,Round Type & Ceramic-Coated Plate (MSH-50D-Set)
““witeg””WiseStir��MSH-50D Digital Compact Hotplate Stirrer, Round-Type Plate,Φ135 ㎜Ceramic Coated or Anodized Plate, Digital Feedback Control, Back Light LCD, up to 380 ℃, ±0,3 ℃, 80 ~ 1.500 rpm
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
■■ Digital Feedback Control by High-Performance Microprocessor■■ Ceramic Coated Plate (MSH-50D) for Chemical/Acid Resistance or
Anodized Plate (MSH-55D) for Scratch Prevention■■ Patented Jog-Shuttle Control System■■ CE Certified
Application & Features� Digital Feedback Control by High-Performance Microprocessor.� Superior Temperature Uniformity : 10 % less on the Plate at Ambient Temperature. � Accurate Temp. Control of the Sample in the Vessel Using Optional PT100 Sensor.� User’s Self -Compensation Function :
To Control Difference between Real Temp. and Indicated Temp. (±10,0 ℃)� Digital LCD Display with Back-Light Function.� Ceramic Coated Plate (MSH-50D) for Chemical/Acid Resistance or Anodized Plate (MSH-55D)
for Scratch Prevention.� Aluminum Die -Casting Body. � Storage Function : Timer & Alarm.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)� Patented Jog-Shuttle Control System.� CE Certified.
Back Light LCD
Holder+Clamp(CL220)
Temp. Sensor(SS200)
Rod (RD200)
Ceramic-CoatedPlate, ΦΦ135 mm
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
<Continued on Next page>
~380℃/ 80~1.500rpm
www.witeg.de 79
HoHotplates Stirrers
Ordering InformationMSH-50D Hotplate Stirrer Unit & Package SetDH.WMH03050 Digital Hotplate Stirrer, MSH-50D-Unit,
Ceramic-Coated, Φ 135 mm, 80~1.500 rpm, to 380 ℃DH.WMH03051 Digital Hotplate Stirrer Package, MSH-50D-Set
with SS500 External Temp. Sensor,RD200 Support Rod and CL220 ClampPacking Dimension w 400×d 280×h 200 mm, Gross Weight 4 kg
MSH-55D Hotplate Stirrer Unit & Package SetDH.WMH03055 Digital Hotplate Stirrer, MSH-55D-Unit,
Anodized, Φ135 mm, 80~1.500 rpm, to 380 ℃DH.WMH03056 Digital Hotplate Stirrer Package, MSH-55D-Set
with SS500 External Temp. Sensor,RD200 Support Rod and CL220 ClampPacking Dimension w 400×d 280×h 200 mm, Gross Weight 4 kg
Additional Function AccessoriesDH.WHP503060 Direct Contact Temperature Sensor, SS500,
PT100�, for MSH-50D / 55DDH.WHP503061 Direct Contact Temperature Sensor, SS510,
PT100�, Teflon Coated, for MSH-50D / 55DDH.WHP503036 Stand Rod, RD200, Stainless Steel, Φ12×L 450 mm,
for HP-20A / 20D, MSH-20A / 20D, MSH-50A / 55A,MSH-50D / 55D and SMHS
DH.WHP503012 Holder+Clamp, CL220, for Temp. Sensor
�PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of ±0,3 ℃
Digital Compact Hotplate Stirrer,Round Type & Anodized Plate
(MSH-55D)
AnodizedPlate
<Teflon Coated PT100 Sensor : SS510>
<Temp. PT100 Sensor : SS500>
<Stand Rod:RD200>
<Holder +Clamp:CL220>
<Continued from...““witeg””WiseStir��MSH-50D Digital Compact Hotplate Stirrer >
~380 ℃ / 80~1.500 rpm
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg bbeeaakkeerrss aanndd ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3333,, 3344,, 229933--229966..
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ssttiirrrriinngg bbaarrss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 336622,, 336633..
Model SMHS-3 : 3 Places SMHS-6 : 6 Places
Number of Places 3×1 Places 3×2 PlacesStirring Capacity (H2O) Max. 20Lit.Motor Rating (9 / 4 W)×3 (9 / 4 W)×6Speed Range 80 ~ 1.500 rpmSpeed Control Resolution 5 rpm
Temp.Range Max. 350 ℃Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)
Temp. Display Resolution 0,1 ℃Temp. Control Resolution 0,5 ℃Heating Power 400 W / Place (Total 1,2 kW) 400 W / Place (Total 2,4 kW)
Heating Plate Specially Designed Heating Module (High Uniformity : Temp. Difference less than 10 %)
Permissible AmbientTemperature Ambient +5 ~ 50 ℃
Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mmController Digital Feedback Controller with Jog Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)Plate Size (mm) 140×140
MaterialPlate Ceramic Coated AluminumBody Powder Coated Steel
Dimension (w××d××h) (mm) 510×240×100 510×410×180Weight 7,9 kg 15,2 kg
OthersCE Certified
Storage Function (Temp., RPM, Timer)Locking Mode (Jog-Shuttle Input Disabled)
Power Consumption 1,5 kW 3 kWPacking Dimension (w××d××h) (mm) 540×330×170 570×540×230
Gross Weight 10 kg 18 kgPower plug type Hybrid E+FPower Supply
��
AC 230 V, 50 / 60 Hz
witeg Labortechnik GmbH80
Hotplates StirrersHo
““witeg””WiseStir��SMHS Systematic Multi-Hotplate Stirrers, 3-/6- Places, Ceramic-Coated PlatesDigital Feedback Control, Back Light LCD, Independent Heating & Stirring Control, up to 350 ℃ / 1.500 rpm
Back Light LCD
140 mm140 mm
** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..
Systematic Multi-Hotplate Stirrers,3××1 Ceramic-Coated Plates (SMHS-3)
■■ Excellent for Multi-use and a Wide Various Sample Testing■■ Patented Jog-Shuttle Control System■■ CE Certified
Application & Features� Excellent for Multi-use and wide range of Sample Testing.� Systemized 3 and 6-Hotplate Stirrer. � Independent Heating and Stirring Control.� Digital Feedback Control by High-Perfomance Microprocessor.� Ceramic Coated Plate-Chemical/Acid Resistance.� Maximum Temperature of 350 ℃ with ±0,3 ℃ Control Accuracy.� Accurate Temp. Control of the Sample in the Vessel using Optional PT100 Sensor.� Digital LCD Display with Back-Light Function.� Digital Timer Function Included : 99 hr 59 min.� Storage Function for the Set Values : Temperature, RPM and Timer.� Locking Mode for Experimental Safety Supported.� Patented Jog-Shuttle Control System.� CE Certified.
Back Light LCD
140 mm140 mm
Systematic Multi-Hotplate Stirrers,3××2 Ceramic-Coated Plates (SMHS-6)
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System
Specification
<Teflon Coated PT100 Sensor :SS110/SS210>
<Temp. PT100 Sensor : SS100/SS200>
<Stand Rod:RD100/RD200>
<Holder +Clamp:CL220>
Patented Control System(No. 10-0554098)
1 or 2 Mode Buttons + Jog Shuttle Switch
Reeaalliizzee ““Eaassyy ttoo Ussee””
Ordering Information3×Hotplate Stirrer, 3×1 PlacesDH.WMH03503 1×3 Hotplate & Stirrer, SMHS-3, 3 Position,
510×240×100 mm, 140×140 mm, to 350 ℃
6×Hotplate Stirrer, 3×2 PlacesDH.WMH03506 2×3 Hotplate & Stirrer, SMHS-6, 6 Position,
510×410×180 mm, 140×140 mm, to 350 ℃
Additional Function AccessoriesDH.WHP503020 Direct Contact Temperature Sensor, SS100, PT100��
for HP-30D, MSH-30D and SMHSDH.WHP503021 Direct Contact Temperature Sensor, SS110, PT100��
Teflon Coated, for HP-30D, MSH-30D and SMHSDH.WHP503036 Stand Rod, RD200, Stainless Steel,
Φ12×450 mm, for HP-20D, MSH-20D and SMHSDH.WHP503012 Holder+Clamp, CL220 for Temp. Sensor�PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of±0,3 ℃
~350℃ / 1.500rpm
~350℃ / 1.500rpm
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg bbeeaakkeerrss aanndd ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3333,, 3344,, 229933--229966..
※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ssttiirrrriinngg bbaarrss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 336622,, 336633..