BASE ENGINEERING INC.FUEL TRANSFER AUTOMATION

http://www.baseng.com/

Radio Remote Controlled Transport Leak Detection System

Radio Remote Controlled Transport Leak Detection System is mainly developed for using in propane, anhydrous ammonia and butane transports. Until a few years ago transport leak detection was only available for some high quality technical purposes only. However during the day the use of the transport leak detection has expanded among the normal technical sectors also. The Transport Leak Detection System made by the reputed manufacturers is equipped with powerful industrial remote control systems. These Transport Leak detectors are available with DCE approved certification and they are certified to comply with all US DOT and Canadian Transport Canada regulations for ‘Passive Shut Off’.The main function of the Automatic transport leak detectors is to continually monitor the off-loading process looking for a rapid change in discharge pressure. While using in a transport system or machineries, these radio remote controls detect a separated hose or failed connection and close the tank internal valve within 1/2 second. This helps it to increase safety in bulk transport system where leak detection is really necessary. As a result all types of major and minor accidents in the technological field are also reduced.

http://www.baseng.com/

Wireless Industrial Non-Proportional Crane Service TrucksWireless Industrial Non-Proportional Crane Service Truck is a one man control radio remote control system that eliminates a second person instructing the operator where to position the tank. While using the system in any purpose the operator has full freedom of movement around entire worksite while setting tank precisely into position.BASE Engineering designs excellent wireless industrial remote controls for different engineering and commercial purposes. Since 1996 over 50,000 BASE systems have been employed around the globe to increase job safety and productivity. As a result of this design effort we have the confidence to offer a four year, no hassle, and replacement warranty on every product we manufacture. Radio remote control system, in our hand, has moved into the next level.

http://www.baseng.com/

Industrial Remote Control for Bulk Plant Emergency ShutdownThe fixed frequency industrial remote control enabled E-Stop switch can operate systems at 33 MHz using two double “A” batteries. The powerful transmitter of the system is energized during the time when E-Stop switch is activated. Industrial wireless controls included in the E-Stop switches can work in conjunction with existing hard-wired, manual E-Stop switches and plant safety controls. One can also add operator worn E-Stop remotes along with these systems.Industrial radio remote control emergency shutdown system is mostly developed in order to eliminate costly hard wiring of the fixed location emergency stoop switches. The operator can install any numbers of wireless remote emergency switches within the plant facility. This helps the operator to communicate with one receiver as well as the controller unit.

Wireless Remote Controllers with Additional System AccessoriesRemote control technology has moved a long way along with the modern innovation. The modern radio remote control systems are widely used and they are made by using the latest technology. Today’s wireless remote controllers are not only used in opening garage doors or playing music systems. The use of radio remote control systems has expanded to its highest capacity.These modern wireless remote controllers are mainly used in industrial sectors to control the gigantic machines. The gigantic machines are actually needed to be handled with interference free control. The modern radio remotes are equipped with FHSS or Frequency Hopping Spread Spectrum Technology that enables them to prevent all types of electrical and radio interference.

Utilize Transport Leak Detection System with Remote Control Technology

Now the remote control technology has filled the gap in a lot of businesses that required by allowing them to completely restructure the way that they work by changing the way that they employ staff and also how they run their industrial system. Wireless controls have greatly changed the IT after sales market and also changed the way that administrators and technicians.

BASE Engineering is a pioneer in developing industrial remote controls. Our industrial remote control technology and systems are equipped with powerful industrial wireless transmitter and they have been employed around the globe to increase job safety and productivity. We design and manufacture extremely rugged industrial wireless control and solutions for most industrial applications such as process controls, industrial petroleum, bulk transport, tank truck equipment, tank truck loading, crane service, hydraulic pumps and many more.