Wire-cut EDM – Ready for Production...The wire threader for maximum dependability. Wire break...
Transcript of Wire-cut EDM – Ready for Production...The wire threader for maximum dependability. Wire break...
MV-SWire-cut EDM – Ready for Production
ADVANCE TYPE3
3MV-S
Mitsubishi Electric . . . . . . . . . . . . . . . . . . . . 5Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Tubular Shaft Motor . . . . . . . . . . . . . . . . . . 11Generator technology . . . . . . . . . . . . . . . . 13Precise Finish Circuit . . . . . . . . . . . . . . . . . 15Wire threading . . . . . . . . . . . . . . . . . . . . . . 17Simple operation . . . . . . . . . . . . . . . . . . . . 19Intelligent user guidance . . . . . . . . . . . . . . 21Crash Protection System . . . . . . . . . . . . . . 23Remote control . . . . . . . . . . . . . . . . . . . . . 25
Maintenance-friendliness . . . . . . . . . . . . . . 27 Profitability . . . . . . . . . . . . . . . . . . . . . . . . . 29Productivity and savings . . . . . . . . . . . . . . 31Optional extras and non-standard materials 33In-built job scheduler . . . . . . . . . . . . . . . . . 37Automation . . . . . . . . . . . . . . . . . . . . . . . . 39Examples of applications . . . . . . . . . . . . . . 41Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Key data . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Technical data . . . . . . . . . . . . . . . . . . . . . . 49 User reports and more . . . . . . . . . . . . . . . . 51
1970
1964
1980
2000
2010
2020
1990
36 model series since 1964. An assurance of innovation and dependability.
Experience on my side.
ADVANCE TYPE3
5MV-S
Over 8,000patent applications per year
64,000producedEDM machines
135,000employees
95 yearsof dependable technology
If you’ve got grand designs, you need someone strong you can count on.
Since 1970, a growing number of European companies have therefore been turning to high-performance EDM machines from world market leader Mitsubishi Electric .
Only by producing components in-house is it possible to tailor them perfectly to the intended task . Mitsubishi Electric resorts to its own controls, semiconductors, motors and other items, which are adapted in detail to all requirements . The only thing you notice is that it works – and often for many decades after purchase .
If you want to invest soundly in a durable EDM machine, choose Mitsubishi Electric .
This way I know I’m in good hands.
7MV-S
Wire break point insertion even on thick and interrupted workpieces.The time-consuming return to the starting point is omitted – and machining continues where it left off, thanks to the highly advanced wire annealing system . Depending on machining conditions, threading can be successfully per-formed with or without jet stream and even submerged – depending on workpiece thickness .Continued on page 17
Extra precision and speed thanks to the generator that not only thinks, but also thinks ahead.If you want to achieve better results with fewer recuts, you need the right blend of mutually adapted technologies . With Precise Finish Cut, you achieve more precise results faster .Continued on page 13
The speed of light... . . .for communication by fibre optics . The Tubular direct drives with their highly responsive con-trol on the main axes fully exploit the benefits of high communication speed . No heat, no maintenance and no contact – just extra precision for good . At Mitsubishi Electric, this is known as “Changes for the Better” .Continued on page 11
An EDM system must help your company to make money.The MV-S Series cuts expenditure on electricity, wire and filters considerably – so that you can earn more . The machine is designed for decades and has extra-low maintenance needs thanks to intelligent technologies . Continued on page 27
Operation must be simple and assist the user.The directly retrievable operating instructions, Windows-based user guidance and automatic 3D workpiece posi-tion measurement make it easy to relax .Continued on page 19
You’re surely familiar with the cogging torque manifested by a conventional electric motor . And it is precisely this cogging torque that is undesirable, as are varia-tions in torque . The Tubular Shaft Motor – for extra precision .
Tubular Shaft Motor
Conventionalmotor
Cogging torque N/cm
65
–1
4
–2
3
–3
2
–4
1
–5–6
0
0° 10° 20° 30° 40° 50° 60° 70°
ATINTELLIGENT
LLSLONG LIFESYSTEM
NUINATURAL USERINTERFACE
ODSOPTICALDRIVE SYSTEM
PFCPRECISEFINISH CIRCIUT
Thrillingtechnology.
Magnetic levitation in the EDM machine – no friction, no frictional heat and no wearFor rapid and high-precision wire-cutting results, the Tubular Shaft Motor con-verts almost all the energy into nano-precision axis movement . This is not only good news for your electricity bill and reduces maintenance costs, but also brings you long-term benefits in terms of durability and unwavering precision .
Paying off...year after year.
9MV-S
Tons of solidity cast in steel.
Solid machine body The specially selected Meehanite casting ensures durability that can be measured in decades and copes with high workpiece weights day after day . The rugged machine bed takes even the severest punishment in its stride – unlike many a less expen-sive material .
The door that simply vanishes... . . .so that you have direct access . This saves time and space and makes workpiece set-up that much easier .
Less elaborate designs may be cheaper at first, but…
Ingenious drive positioningIf you want extra-smooth axis movements, you have to position the drives right in the centre of the moving weight – so that the superior Tubular Shaft Motor can exploit its full potential . Glass scales right next to the work space are an assurance of maximum precision right from the start .
Ergonomics in the work spaceThe three-sided work table is ergonomically built on the Z = 0 level . This way workpieces can be perfectly positioned, even without clamping elements . High-grade stainless steel components and the stainless steel tank ensure dependability and maintenance -freedom .
11MV-S
ODSOPTICALDRIVE SYSTEM
Tubular Shaft Motor
Conventionalmotor
Cogging torque N/cm
65
–1
4
–2
3
–3
2
–4
1
–5–6
0
0° 10° 20° 30° 40° 50° 60° 70°
Non-contact drive = trouble-free long-term drive.
12-year warranty on positioning accuracy.
The Tubular Shaft Motor converts energy directly into motion, without contact, without maintenance and above all without loss of precision – long-term . Combined with the 400% faster fibre-optic- based control, this superior technology can truly show what it is capable of .
The 12-year genuine manufacturer warranty on positioning accuracy is a guarantee of top-level durability .
Your company’s technological edge has a name: Tubular Shaft Motor – from world market leader Mitsubishi Electric .
Find out more about it here:www.mitsubishi-edm.de/tsm
Speed of lightThe Mitsubishi Electric polymer optical fibres have decisive advantages – not only over conventional copper cables, but also over glass fibres . Not only their total resistance to water, but also their high transmission rates combined with minimal space requirements and maximum flexibility are essential for truly progressive EDM systems . The only thing that you as a user notice is the longer service life and enhanced precision .
No disruptive cogging torque You’re surely familiar with the cogging torque ma n i-fested by a conventional electric motor . It is pre-cisely this cogging torque that is undesirable, as are variations in torque . The Tubular Shaft Motor – the optimal drive for precision applications like electrical discharge machining .
Perfect drive What was it about the main X and Y axes of con-ventional drive systems that bothered developers at Mitsubishi Electric? The need for lubrication, the friction and frictional heat, power consumption, backlash, the cogging moment and above all the possible wear . Only a non-contact drive overcomes these drawbacks from the outset and is thus an as-surance of better results and enhanced dependabi-lity over decades .
13MV-S
PFCPRECISEFINISH CIRCIUT
PATENTEDBetter straightness for your workpieces
Precision for stepsand around corners.
Lower costs, higher profits.
Results with even greater precision with 3D dataIf you can identify obstacles and challenges in ad-vance, you can respond to them in good time . The fully automatic rough machining control (Power Master) identifies cutting conditions in real time . The Power Master 3D additionally analyses the transmitted 3D data and calculates changing cut-ting conditions in advance, entirely without expert knowledge . Transition lines on stepped workpieces are now a thing of the past .
Getting a grip on radii and cornersOn small inner and outer corners and complicated geometries, Corner Master 3 comes to your aid . You merely define your priorities, and optimisation is performed accordingly .
Better straightness and shape accuracyWith precise control of the electrical discharge position, material is only removed where it needs to be . The patented functions of the Digital AE II im-prove rough and fine machining and fine finishing – in terms of both precision and machining time .
Examples of Power Master machining applications
Steppedworkpiece
Steppedworkpiece
Workpiece with crossbores and cavities
Inner corner60°(R: 0 .2 mm)
Inner corner90°(R: 0 .15 mm)
Examples of workpieces
CM3
Comparison of corner accuracies
Corner error: 1 µm
Conventionalcorner control
Corner error: 2 – 3 µm
Conventional Digital AE II• Technology adjustment• Increased number of cuts• Angle compensation• High wire spooling rate
• Electronic control of the electrical discharge position in relation to workpiece thickness
Co
ntro
l of
elec
tric
al
dis
char
ge
15MV-S
PFCPRECISEFINISH CIRCIUT
Precise Finish Circuit – a boost to productivity.
Greater speed and accuracy –and you save more.
New V350 generatorAchieve excellent surface qualities with the V350 generator .
Response time is decisiveAn EDM machine that reacts with greater speed and precision achieves better surface quality faster . The new V350 generator has a significantly higher effective clock rate . The voltage is built up faster and with greater precision thanks to reduced capacitance loss . Thanks to faster voltage build-up, spark duration and working voltage can be lowered . All that you will probably notice is higher surface quality and lower power costs .
Twice-as-fast spark detectionThe high-speed digital control works up to twice as fast as traditional machines . This prevents wire breakage and increases ma-chining speed noticeably at the same time .
17% faster multi-pass jobs 4 cuts of Ra 0 .30 µm compared to a conventional machine .
SL servo: 2 µm straightness2 µm
Conventional: 7~3 µm straightness3 µm7 µm
1 µm
-7,0 µm
7,0 µm
3 µm straightness Even cuts with steps during machining are mastered with precision for reliable processes .
17MV-S
Threading even in the most difficult conditions
Watch film now:www.mitsubishi-edm.de/threader
ATINTELLIGENT
Good to know that it works – with or without jet stream.
Vastly superior.The wire threader for maximum dependability.
Wire break point insertion even on thick and interrupted workpiecesThe time-consuming return to the starting point is omitted – and machining continues where it left off, thanks to the highly advanced wire annealing sys-tem . Depending on machining conditions, threading can be successfully performed with or without jet stream and even submerged – depending on work-piece thickness .
Round diamond guideMaximum precision and durability ensure the best results in the long run – inclusive of maintenance- friendliness due to a small number of parts and simple design .
19MV-S
NUINATURAL USERINTERFACE
Simply achieve more.
Intuitive operation and knowledge at a keystroke.
In dialogue with the machineProduce NC data the easy way . Machining tech-nologies are assigned intuitively and with menu guidance . Optimise the parameters of the machin-ing technologies and store these as an ME-Pack .
Help at a keystrokeThe complete machine documents inclusive of maintenance instructions are always available, and the right help is quickly found . Comprehensibility is aided by photos and 3D depiction .
3D data import Import 3D data in Parasolid® format and create 3D shapes with the integrated 3D CAD/CAM . By using them, you can generate NC data with the associated machining parameters . Even more pre-cise results are achieved with intelligent analysis of the machining conditions by the Power Master 3D that thinks ahead .
Par
aso
lid is
a r
egis
tere
d t
rad
e m
ark
of
UG
S P
LM S
olu
tions
Co
. Ltd
.
21MV-S
If time is of the essence or you want the machines to take some of the work off your shoulders . Set-up often takes too long; from now on, you can save this time . Highly accurate probing cycles measure the workpiece precisely . With the water flow on, off or in the die-lectric – whatever you prefer . By means of the cutting wire or with an optional sensing head .
NUINATURAL USERINTERFACE
Making my life easier.
Clamp it and press Start !Intelligent user guidance takes the effort out of work.
Fully automatic alignment cyclesIntelligent user guidance takes you to the finish . The electrical discharge machine takes you quickly to your goal .
Manual controlComfortable set-up with the manual control box: standard equipment with Mitsubishi Electric . All essential control functions at hand – wherever you need them .
3D position measuring – manual or automatic Both are possible . As a user, you decide whether you do set-up classically by hand or the machine automatically defines the position of your work-piece . Using the cutting wire or pick-up coil – the machine takes care of it for you . It only takes the press of a button .
23MV-S
Giving me the assurance I need.
Crash Protection Systemeasily installed.
Fully automatic The wire EDM systems from Mitsubishi Electric constantly check the axial forces and thus automat-ically detect potential accidents before they hap-pen . If there is an obstacle in the travel path, this is identified in a gentle approach and the control automatically reverses .
The in-built “guardian angel”Care, attention and good planning are an assurance of immaculate results, even with the most advanced technology . And should the unexpected neverthe-less occur, all the wire-cut EDMs from Mitsubishi Electric come with an in-built “crash protection system” .
Crash Protection System in actionSee for yourself and watch the dependable Crash Protection System from Mitsubishi Electric in action!
Automatic reverse
Travel
Po
wer
A considered and far-sighted approach is the best safety policy – but what if things have to be done in a rush? An intelligent EDM system that spots and prevents possible collisions contributes to safety at work and saves annoyance and time .
CPSCRASHPROTECTIONSYSTEM
Straight to the film:www.mitsubishi-edm.de/cps-en
25MV-S
NUINATURAL USERINTERFACE
Remote control with mcAnywhere
Always in charge – wherever you are.
The freedom I expect.
You can control the machine and keep an eye on processes, wherever you are . Intelligent communication takes the pressure out of work . Ideal combined with automation solutions and high process autonomy with the intelligent AT wire threader .
mcAnywhere Control Comfortable and reliable remote control for your EDM system – powered by TeamViewer .
mcAnywhere Service Rapid help from Mitsubishi Electric experts .
mcAnywhere Contact Any place, any time . . .always up to date with direct status messages .
27MV-S
See for yourself:www.mitsubishi-edm.de/power
Straight to the movie:www.mitsubishi-edm.de/filters
Watch film now:www.mitsubishi-edm.de/spool
48-location power feed contact
LLSLONG LIFESYSTEM
Cleaning the tank seal With the ingenious auto-clean function, your tank seal always stays impeccably clean . This ensures long-term precision and saves labour for the user .
Tank seal cleaning in
0 seconds
While others are still setting up, you’re already cutting.
Quick replacement, long-term savings.
Changing the power feed contactReplace the power feed contact with just one hand and a small gauge – at a speed befitting Formula One .
Rapid filter change... . . .without tools or wasted time . Two hands, 32 seconds – and the filter is replaced .
Cutting wire replacementSimply replace the spool and feed the cutting wire over the feed rollers . Everything ready for work again in 92 seconds .
Spool change in
92 secondsFilter change in
32 secondsPower feed contact change in
5 seconds
29MV-S
* Assuming production of six punches per working day, electricity price 0.15 EUR/kW for 250 working days/year
Conventional EDM machineConventional EDM machine
LLSLONG LIFESYSTEM
MV-S TubularConventional
EDM machine
Time period (24 h day)
Productive wire cutting 10 h 32 min 14 h 06 min
Stand-by 1 h 9 h 54 min
Standby time without wire cutting 12 h 28 min –
Energy consumption in kWh
Productive energy consumption 51 .07 113 .36
Energy consumption without wire cutting 32 .38 65 .34
Deactivating Sleep Mode 2 .32 –
3,484.88 EUR saved per year*
178 .70 kWh
85 .77 kWh
Higher performance: Energy costs reduced by up to 55%
Calculate the difference online at:www.edm-calculator.com
Because you save more, you earn more.
Greater precision faster= lower piece costs.
Reducing cost of ion exchange resinReduce filter costs by up to 45%
Sample calculationsWorkpiece . . . . . . . . . . Punch, steel 1 .2379 – 100 mm cutting lengthCutting height . . . . . . . 60 mmSurface . . . . . . . . . . . . Ra 0 .32 µm (comparison with Ra 0 .35 µm for conventional EDM machine)Wire electrode . . . . . . . Brass, 0 .20 mm
MV-S TubularMV-S Tubular
31MV-S
32 minutes faster Savings: 837 metres per workpiece
3,300 EUR saved per year*
LLSLONG LIFESYSTEM
Producing more, less expensively.How it’s done.
Better result: Wire consumption reduced by up to 46%30.76% more productive capacity
* Assuming production of six punches per working day, brass bare wire (0.20 mm) price 9.60 EUR/kg for 250 working days/year
More output per unit of space.
1 2 3 4 Total
Wire consumption in metres
MV-S Tubular, Ra 0 .28 µm 406 272 167 241 1086
Conventional EDM machine, Ra 0 .35 µm 1090 303 303 227 1923
1 2 3 4 Total
Cutting time in minutes
MV-S Tubular, Ra 0 .28 µm 45 20 16 23 104
Conventional EDM machine, Ra 0 .35 µm 80 20 20 16 136
104 min
136 min
1 .086 m
1 .923 m
33MV-S
Optional equipment – not many, but useful additions.
Customised extension.The intelligent solution.
Tool package
3D position detection
Complete kit for the machining of rotationally sym-metrical tools with PCD or CBN cutting edges .
ERGO-LUX (machine lights)
Working conditions that are kind to your eyes – for the sake of users and for the benefit of machining results .
20 kg wire station Warning lamp
Machine status is visible from a distance .
Accommodates large wire spools with ease .
Position detection and calculation manual or automatic with integrated 3D measuring probe .
Mounted on the machine head, activated on command . The intelligent solution .
Angle Master Advance II
Special wire guide and sequential calculation of the wire set-up point for precision angles .
3D probing
35MV-S
From grinding wheels up to high- precision cones: a future-proof machine that you can upgrade at any time.
Extra axes: Expand your possibilities – boost your earnings.
A turn for the better.Extend your machine’s functions.
B-axis Rotational/swivel axis Mini-rotational axis Rotational machining
A servo-controlled B-axis fully integ-rated in the machine controls per-mits wire cutting on a rotating car-ried workpiece . Separation and multi-sided machining can be per-formed in a single clamping as well as simultaneously .
Rotating spindle fully integrated in the machine control with positioning for the most minute high-precision com-ponents, e .g . the manufacture of ejec-tor pins with a diameter of ≥ 0 .05 mm, the realisation of conical threads in medical technology, ero sive grinding, turning and simultaneous machining .
Machining cones to the highest stan-dards of precision: the rotational/swivel axis integrated in the machine controls . Multi-axis machining to the centre of the workpiece and multi-sided machin-ing in a single clamping, plus the real-isation of high-precision conical poly-gons .
Can be used for reliable indexing and simultaneous machining as well as high-speed rotation (EDM grinding): the servo-controlled rotational ma-chin ing fully integrated in the machine controls . Discover new production scope!
37MV-S
“Automation light” installed at the same time.
In-built job scheduler.The easy way to manage orders.Integrated job schedulingGreater flexibility thanks to adaptable job schedul-ing: with the simple assignment of priorities, you can quickly respond to changing requirements and squeeze in an urgently needed part with ease . Several machining programs can be deposited in the job scheduler and managed there .
Fast and flexible work planningThis is the easy way to add new jobs during machin-ing or change the order of existing machining opera-tions . The new job processing system with priority management makes it possible to amend a machin-ing list without interrupting machining .
Order managementIf required, the simplified order management sys-tem replaces the preparation of main programs (NC code) to define the machining process and now also permits status changes in the on-going process . For instance, urgently needed parts can now be added and given preferential treatment – other jobs are meanwhile put on-hold (“Wait” status) .
Workpiece A
0101
Workpiece B
Workpiece C
Workpiece D
STEP
02 02STEP
03 03STEP
04 04STEP
Workpiece AFGH4584 2TJ45321 54HJ584 93075 883 859873 Z8439874 1653546 86531 B784 D6253
4ACU26254148702 FG7345640FG 441K5 41 5478G 4654
Workpiece B4 44847310 6564 54F4 4604G 4604 54F4F 0640 847763 8787F 0968F97 087G746 078T76R0
89R78C364B 4798TRUF64 8J7T87F6H1 7J4K7
Workpiece C J T9 741F1 86F7ZH9Z79L OI5 4P8
79EW 5D48T9 9U 95 T4JR8F7E9T 59 4Z 1478 780 41 080 4H1F3 0148R0 4J6T04
Workpiece D180478 041NG 048G4R 0402 FG7345640FG 441K5 41 5478G 4654G8 9J074 8L4BF0847S 854749E4V 4147W8A0
7J4KZ7 F6 FG7345640F
InsertREADY
WAIT
Delete
Bring forward
Move
12
3
JPJOBPLANER
RETRY
CHANGESTATUS
SAVE SCHEDULE
The in-built first step towards automationEach MV-S from Mitsubishi Electric comes with the easy-to-operate job scheduler . This makes you flexible and paves the way to more extensive automation solutions .
39MV-S
Everything from a single source if desired.
Complete systemsresponsibility
Mitsubishi Electric
EDM systems
Robots
Software
Controls
à
If you want to make money, automate!
Automation has to be flexible.Reconciling different brands.
Optimum solutions – customised, configured or standardised The handling systems and robots from different manufacturers can often be seamlessly integrated . Renowned for their dependability and productivity, the EDM machines of the MV-S Series from Mitsubishi Electric are automation-ready . We’d be happy to show you examples that have proven effective in practice and help you to cut costs and boost your productive capacity .
Flexible solution: Articulated-arm robot up to 15 kg of Mitsubishi Electric quality .
MasterCell: The slim and easy-to-use management software for automation solutions .
Handling equipment from different manufacturers – welcome and easily integrated .
41MV-S
Discerning customers demand more.
Successfully mastered!The success factor in a wide range of fields.Medicine · Vehicle industry · Communications/electrics · Aerospace
43MV-S
You don’t like call centres and queuing systems? We don’t either . With every Mitsubishi Electric EDM system you buy excellent service as part of the package . With 167,000 parts in stock in Ratingen near Düsseldorf, you have a swift and reliable source of parts – on request by express in less than 24 hours . Service is performed by our own highly skilled ser-vice technicians so that production is kept de-pendably up and running .
TrainingUsers acquire skills at the machine and at specially equipped PC workstations . This way they benefit most from the direct transfer of know-how .
Users are assisted over the phone and benefit from the expertise and wealth of experience of Mitsubishi Electric specialists .
Service hotline: +49 (0) 1801 486-600Application support: +49 (0) 1801 486-700Monday to Friday: 7 .30 am to 8 pmSaturday: 9 am to 4 pm
We’re there to help you.
of the spare parts available in Europe – delivery within 24 hours ex Düsseldorf warehouse
98.7% 167,000parts at the Düsseldorf warehouse
Expert assistance whenever I need it.
Headquarters in Ratingen, Germany
Service.Always there.
45MV-S
at least 400
*1 at least 500 and 2 at least 700 when the 20 kg wire spool unit is mounted
at least 300 (*2)
at le
ast
200
(*1)
2025
Wire station
Wire collectionbox
Generator
Dielectricfluid unit +
temperaturecontrol unit
Machine
Control panel(monitor)at
leas
t30
0
2103
2702
2760
640
300
400
110
Travel
Trav
el
110
450
340
110
Table layout
Machine body weight . . . . . . . . . . . . . . . . . . . . . . 2700 kg
Generator weight . . . . . . . . . . . . . . . . . . . . . . . . . . 240 kg
Machine height . . . . . . . . . . . . . . . . . . . . . . . . . 2015 mm
Required minimum dimensionsfor doorways (W x H) in mm . . . . . . . . . . . . . 1910 x 2015Travel (U / V) in mm . . . . . . . . . . . . . . . . . . . . . . . 120 / 120
Z = 220 mm
Y= 300 mm
X = 400 mm
215
mm
700 mm
810 mm
500
kg
Key data at a glance.
Machine body weight . . . . . . . . . . . . . . 3500 kg
Generator weight . . . . . . . . . . . . . . . . . 240 kg
Machine height . . . . . . . . . . . . . . . . 2150 mm
Required minimum dimensionsfor doorways (W x H) in mm . . . . . . . . . 2022 x 2150Travel (U / V) in mm . . . . . . . . . . . . . . . .150 / 150
Wire station
at le
ast
800
3030
at le
ast
300
at least 500* 2687
Machine
* at least 700 when the 20 kg wire spool unit is mounted
818
at least600
370
E.KOIoniser
Dielectricfluid unit +
temperaturecontrol unit 22
92
Wire collection box
Control panel(monitor)
MV2400ST U B U L A R 56
0
110
420
840
110 110
600Travel
400
Trav
el
Table layout
MV1200S T U B U L A R
Z = 310 mm
Y= 400 mm
X = 600 mm
305
mm
820 mm
1050 mm
1500
kg
ADVANCE TYPE3
ADVANCE TYPE3
47MV-S
Wire station
3452
at le
ast
800
3060
at le
ast
300
at least 300* 2837
Machine
* at least 700 when the 20 kg wire spool unit is mounted
818
at least 400
370
Dielectricfluid unit +
temperaturecontrol unit 22
92
Wire collection box
E.KOIoniser
Control panel(monitor)
640
110
110
420
840
110 110
600Travel
400
Trav
el
Table layout
Machine body weight . . . . . . . . . . . . . . . . . . . . . . 3650 kg
Generator weight . . . . . . . . . . . . . . . . . . . . . . . . . . 240 kg
Machine height . . . . . . . . . . . . . . . . . . . . . . . . . 2380 mm
Required minimum dimensionsfor doorways (W x H) in mm . . . . . . . . . . . . . . 2085 x 2380Travel (U / V) in mm . . . . . . . . . . . . . . . . . . . . . . . 150 / 150
Z = 425 mm
Y= 400 mm
X = 600 mm
420
mm
820 mm
1050 mm
1500
kg
Key data at a glance.
Machine body weight . . . . . . . . . . . . . . 5700 kg
Generator weight . . . . . . . . . . . . . . . . . 240 kg
Machine height . . . . . . . . . . . . . . . . 2815 mm
Required minimum dimensionsfor doorways (W x H) in mm . . . . . . . . . 2587 x 2815Travel (U / V) in mm . . . . . . . . . . . . . . . .200 / 200
Wire station
380434
45at
leas
t 50
0at
leas
t50
0
at least300*
3299
Machine
* at least 570 when the 20 kg wire spool unit is mounted
622
at least400
370Dielectricfluid unit +
temperaturecontrol unit
2785
Wire collection box
E.KOIoniser
Control panel(monitor)
MV4800S
780
130
120
650
1080
130 130
800Travel
600
Trav
el
Table layout
MV2400ST U B U L A RC O L U M N U P
Z = 510 mm
Y= 600 mm
X = 800 mm
505
mm
1020 mm
1250 mm
3000
kg
T U B U L A R
ADVANCE TYPE3
ADVANCE TYPE3
49MV-S
MV1200S MV2400S
Machine Travel (X / Y / Z) in mm 400 / 300 / 220 600 / 400 / 310 600 / 400 / 425 800 / 600 / 510
Travel (U / V) in mm 120 / 120 150 / 150 150 / 150 200 / 200
Taper angle (workpiece height) in °/mm 15 / 200 30 / 87 15 / 260 30 / 110 15 / 260 30 / 110 15 / 355 30 / 155
Max . workpiece dimensions (W x D x H) in mm 810 x 700 x 215 1050 x 820 x 305 1050 x 820 x 420 1250 x 1020 x 505
Max . workpiece weight in kg 500 1500 1500 3000
Table dimensions (W x D) in mm 640 x 450 840 x 560 840 x 640 1080 x 780
Table layout Three-sided table on level Z = 0 Three-sided table on level Z = 0 Four-sided table on level Z = 0 Four-sided table on level Z = 0
Possible wire diameters in mm 0 .1–0 .3 0 .1–0 .3 0 .1–0 .3 0 .15–0 .30
Wire spool capacity in kg 10 10 10 20
Automatic wire threader / Wire chopper Yes
Overall dimensions (W x D x H) in mm 2025 x 2760 x 2015 2687 x 3030 x 2150 2837 x 3452 x 2380 3299 x 3804 x 2815
Machine weight in kg 2700 3500 3650 5700
Mains voltage 3-phase 400 V/AC ± 10%, 50/60 Hz, 13 kVA
Filter system Tank capacity in l 550 860 980 1480
Filter particle size in µm / Filter elements 3 / 2 3 / 2 3 / 2 3 / 4
Temperature control Dielectric cooling unit
Weight (dry) in kg Included in machine weight 350 390 450
MV2400S Column Up MV4800S
MV2400S Column UpMV1200S MV2400S
Equipment Wire station 20 kg Optional Optional Optional Yes
Optical drive system with linear scales (X / Y) Yes
Digital AE II generator Yes
Manual vertical front door Yes – – –
Automatic vertical front door – Yes Yes Yes
4-filter system – Optional Optional Yes
Ethernet / DNC / FTP Yes
mcAnywhere Control / Contact / Service Optional
External signal output Optional
Additional axes / rotational axis Optional
Tool package / automation solutions Optional
ERGO-LUX Optional
Tricolour status lamp Optional
Angle Master Advance II Optional
Easy 3D-Setup Software Optional
Renishaw probe on sleeve Optional
Power connection: 3-phase 400 V/AC, PE, ± 10%, 50/60 Hz, primary fuse 32 A slow
Pneumatic connection: 5–7 kgf/cm³, 500–700 kpa, minimum air flow rate 75 l/min, 3/8" hose connection
The EDM system should be set up on a suitable hard industrial floor and preferably on a consolidated concrete floor . Any shielding that may be necessary in conformity with the EMC Directive is not included in the equipment supplied by Mitsubishi Electric .
The cooling unit contains fluorinated greenhouse gas R410A . For further information, please refer to the associated operating instructions .
MV4800S
Details can be found in the assembly plan of the machine:www.mitsubishi-edm.de/download
Generator Power supply unit Regenerative transistor pulse type
Cooling method Fully sealed / indirect air cooling
Max . output current in A 50
Dimensions (W x D x H) in mm 600 x 650 x 1765
Weight in kg 240
Control Input method Keyboard, USB flash drive, Ethernet
TFT colour monitor / Control system 15" touchscreen / CNC, closed circuit
Min . command step (X / Y / Z / U / V) in µm 0 .1
Min . axis resolution in µm 0 .05
Technical data.
Technical dataADVANCE TYPE3 ADVANCE TYPE3 ADVANCE TYPE3 ADVANCE TYPE3
51MV-S
OrderYes, I’d like to order the following copies (please enter desired number):
Profile issue 02/16 01/16 02/15 EDM General Catalogue
MITSUBISHI ELECTRIC EUROPE B.V.Mechatronics Machinery / Profile Reader ServiceMitsubishi-Electric-Platz 1 / 40882 Ratingen / Germany
Order by fax +49 (0) 2102 486-7090
Address
Yes, I would like Mitsubishi Electric to keep me informed of its special offers and campaigns by email .
Note: Your data will not be passed on to any third parties except companies involved in the processing of your order . You can terminate the storage of your personal data at any time by simply sending a fax to +49 (0) 2102 486-7090
Order online www.mitsubishi-edm.de/profile
Handy overall cataloguein the smart A5 book format
Know-how and user reports free of charge – as long as stocks last.
Company
Surname
No ., road
Post code Town, country
Email address
Phone
First name
Date, signature
References? Dozens! Just ask for them free of charge!
From practitioners, for practitioners.
MITSUBISHI ELECTRIC EUROPE B.V.Mechatronics Machinery / Mitsubishi-Electric-Platz 1 / 40882 Ratingen / Germany / Tel . +49 (0) 2102 486-6120 / Fax +49 (0) 2102 486-7090edm .sales@meg .mee .com / www .mitsubishi-edm .de
Sub
ject
to
tec
hnic
al m
od
ifica
tion
and
err
or
/ 0
2 .05
.201
7 /
Art
. No
. 311
961
CertifiedPartner
EN
ADVANCE TYPE3