Keyence - History of Image Processing - 600B22_WW_GB_Technical_History_vol1
Wire bundles connecting to Keyence Sensors (screw plug on other end) Colored Wires from bundles...
-
date post
21-Dec-2015 -
Category
Documents
-
view
218 -
download
0
Transcript of Wire bundles connecting to Keyence Sensors (screw plug on other end) Colored Wires from bundles...
Wire bundles connecting to Keyence Sensors (screw plug on other end)
Colored Wires from bundles (brown, blue, white are nonfunctional, cap with scotch locks)
BLACK wire (data) from each bundle (sensor) is screwed into each channel (0-7)
Blue (ground) screwed into channel 9 on each DAQ
Blue wires are coupled with the BLUE wire from sensor 1 (the control sensor, you should have one sensor with a different label)These are all screwed into the white pots and connect to the ground from your AC to DC power supply (see next slide)
Brown wire from control sensor screwed in pot with RED (hot) wire from power supply out other end
Blue wire (ground) from control and channel 9 of each DAQ screwed in pot with BLACK (ground) from power supply screwed into the other end
Connector for Power Supply (other ends soldered to power supply