Winter Wonderland Projects - The Artful Inker · Winter Wonderland Stampin Glam Squad October 2019...
Transcript of Winter Wonderland Projects - The Artful Inker · Winter Wonderland Stampin Glam Squad October 2019...
Winter Wonderland
Projects:
Feels Like Frost Z-fold card
Feels Like Frost Gift tag
Snow Front Peace and Happiness card
Snow Front Gift tag
Snowman Season card
Snowman Season gift card holder
Rustic Toile
Rustic Christmas
Feels Like Frost Card 1
Feels like Frost Card 2
Snowman Season - Merry Christmas Card
Snowman Season - 2-4-6-8 box with lid
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 1 of 32
Feels Like Frost Z-fold card
Supplies:
Stamp set: Itty Bitty Christmas
Ink/Coloring Tools: Jet Black Stazon Ink Pad
Paper: Seaside Spray, Whisper White, Feels Like Frost 6x6” Designer Series Paper, Silver Foil Sheets
Embellishments: Seaside Spray ¼” (6.4mm) Metallic Ribbon, Silver Metallic Thread
Tools: Bone Folder, Scripty 3D Embossing Folder, Stitched Rectangle Dies (2nd largest)
Adhesives: Mini Glue Dots, Multipurpose Liquid Glue, Stampin’ Dimensionals, Tear & Tape Adhesive
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 2 of 32
Measurements - Imperial ★ Seaside Spray
○ Card Base: 4-¼” x 11” - scored and folded to 5-½” & 2-¾” ○ Embossed Mat: 3-9/16” x 5”
★ Whisper White ○ Inside: 3-7/16” x 4-¾”
★ Silver Foil Sheet ○ Backing for DSP: 3-1/16” x 4-1/16” ○ Backing for Embossed cardstock: 3-7/16” x 4-¾”
★ Feels Like Frost 6x6” Designer Series Paper ○ Front Panel: 3” x 4”
★ Seaside Spray ¼” Metallic Ribbon: 5”
Measurements - Metric ★ Seaside Spray
○ Card Base: 10.5cm x 29.7cm - scores and folded to 14.8 cm & 7.4cm ○ Embossed Mat: 9.8cm x 14cm
★ Whisper White ○ Inside: 8.8cm x 12.1cm
★ Silver Foil Sheet ○ Backing for DSP: 7.7cm x 10.2cm ○ Backing for Embossed cardstock: 8.8cm x 12.1cm
★ Feels Like Frost 6x6” Designer Series Paper ○ Front Panel: 7.5cm x 10cm
★ Seaside Spray ¼” (6.4mm) Metallic Ribbon: 12cm Directions:
1. Prepare card base; Fold & burnish with BONE FOLDER at 5-½” or 14.8cm score line to
half way. Then fold & burnish the 2-¾” or 7.4cm score line, taking the flap back to the left
for the Z-fold.
2. Cut the FEELS LIKE FROST DSP; Firstly cut 2” x 6” or 5cm x 15cm (Portrait) from 1
side of the DSP and save. Secondly, cut the 4” x 6” or 10cm x 15cm piece (Landscape),
to make the 3” x 4” or 7.5cm x 10cm piece for the front panel.
3. Emboss the SEASIDE SPRAY CARDSTOCK using the SCRIPTY 3D EMBOSSING
FOLDER. Die cut the embossed cardstock using the 2nd largest STITCHED
RECTANGLE DIE.
4. Adhere the FEELS LIKE FROST DSP panel to the small SILVER FOIL backing, and
adhere the embossed cardstock to the large SILVER FOIL backing.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 3 of 32
5. Place TEAR & TAPE ADHESIVE behind the largest panel, and wrap the SEASIDE
SPRAY METALLIC RIBBON from the back and across the front. Adhere the embossed
panel to the card front using TEAR & TAPE ADHESIVE.
6. Place STAMPIN’ DIMENSIONALS to the back of the front panel, and adhere to the
embossed panel.
7. Make a bow using the SEASIDE SPRAY METALLIC RIBBON bow, and adhere to the
card front using MINI GLUE DOTS
8. Adhere the WHISPER WHITE CARDSTOCK inside the card, and stamp with a
sentiment as desired.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 4 of 32
Feels Like Frost Gift tag
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 5 of 32
Supplies:
Stamp set: Itty Bitty Christmas
Ink/Coloring Tools: Jet Black Stazon Ink Pad
Paper: Feels Like Frost 6x6” Designer Series Paper
Embellishments: Seaside Spray ¼” (6.4mm) Metallic Ribbon, Silver Metallic Thread
Tools: Delightful Tag Topper Punch
Measurements - Imperial ★ Feels Like Frost 6x6” Designer Series Paper
○ Tag Base: 2” x 4-½”
★ Seaside Spray Metallic Ribbon: 6-2/8”
Measurements - Metric ★ Feels Like Frost 6x6” Designer Series Paper
○ Tag Base: 5cm x 11.5cm
★ Seaside Spray Metallic Ribbon: 6-2/8”
Directions:
1. Take 2” x 4-½” or 5cm x 11.5cm FEELS LIKE FROST DSP and punch the top using the
DELIGHTFUL TAG TOPPER PUNCH.
2. Stamp a sentiment straight onto the tag using STAZON INK.
3. Thread the SEASIDE SPRAY METALLIC RIBBON through the hole, and secure with
SILVER METALLIC THREAD.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 6 of 32
Snow Front Peace and Happiness Card
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 7 of 32
Supplies:
Stamp set (or bundle): Snow Front, Itty Bitty Christmas
Ink/Coloring Tools: Highland Heather, Purple Posy, Smoky Slate
Paper: Highland Heather, Purple Posy, Whisper White, Thick Whisper White
Embellishments: Clear Wink of Stella
Tools: Sponge Brayer, Silicone Craft Sheet
Adhesives: Stampin’ Dimensionals, Multipurpose Liquid Glue
Measurements ★ Thick Whisper White
○ Card Base: 14.8cm x 21cm - scored and folded to 14.8cm x 10.5cm
★ Highland Heather ○ Layer 1: 10.2cm x 14.5cm ○ Sentiment Layer: 1.3cm x 5.7cm
★ Purple Posy ○ Layer 2: 9.9cm x 14.2cm ○ Sentiment: 1cm x 5.5cm
★ Whisper White ○ Layer 3: 9.7cm x 14cm
Measurements ★ Thick Whisper White
○ Card Base: 5-½” x 8-½” - scored and folded to 4-¼” x 5-½”
★ Highland Heather ○ Layer 1: 4-1/8” x 5-5/16” ○ Sentiment Layer: 1/2” x 2-1/4”
★ Purple Posy ○ Layer 2: 4-1/16” x 5-5/16” ○ Sentiment: 3/8” x 2-1/8”
★ Whisper White ○ Layer 3: 4” x 5-1/4”
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 8 of 32
Directions:
1. Smoosh your Purple Posy ink pad onto your Silicone Craft Sheet two or three times.
Use your Sponge Brayer to pick up ink. Then starting off the Whisper White layer, roll
color onto the upper third.
2. Ink the mountains from Snow Front in Smoky Slate, stamp off then stamp on the left.
Repeat adding mountains on the right.
3. Ink the large pine tree in Highland Heather and stamp off before adding it to the scene.
4. Use a couple of the smaller trees, inking in Highland Heather and stamping off before
adding them to the scene.
5. Ink the sentiment from Itty Bitty Christmas in Highland Heather and stamp on the Purple
Posy Strip.
6. Adhere the sentiment strip to the Highland Heather strip with Multipurpose Glue.
7. Adhere the Purple Posy layer to the Highland Heather layer with Multipurpose Glue.
8. Adhere the focal panel to the layers with Multipurpose Glue.
9. Add the layers to the card base with Multipurpose Glue.
10. Adhere the sentiment with Dimensionals.
11. Swish through the lower part of the scene with Clear Wink of Stella.
12. Send!
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 9 of 32
Snow Front Gift Tag
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 10 of 32
Supplies:
Stamp set (or bundle): Snow Front, Itty Bitty Christmas
Ink/Coloring Tools: Highland Heather, Purple Posy, Smoky Slate, Highland Heather Stampin’ Write Marker (optional)
Paper: Highland Heather, Purple Posy, Whisper White,
Embellishments: Purple Posy Scalloped Linen Ribbon
Tools: Sponge Brayer, Delightful Tag Topper Punch, Silicone Craft Sheet
Adhesives: Stampin’ Dimensionals, Multipurpose Liquid Glue
Measurements ★ Highland Heather
○ Sentiment Layer: 1.7cm x 1.7cm
★ Purple Posy ○ Sentiment: 1.5cm x 1.5cm
★ Whisper White ○ Tag: 5cm x 13.5cm
Measurements ★ Highland Heather
○ Sentiment Layer: 11/16” x 11/16”
★ Purple Posy ○ Sentiment: 1/2” x 1/2”
★ Whisper White ○ Tag: 2” x 5-1/4”
Directions:
1. Smoosh your Purple Posy ink pad onto your Silicone Craft Sheet two or three times.
Use your Sponge Brayer to pick up ink. Then starting off the Whisper White layer, roll
color onto the upper third.
2. Ink the mountains from Snow Front in Smoky Slate, stamp off then stamp in the center.
Repeat and add a mountain peak below the first two.
3. Ink the large pine tree in Highland Heather and stamp off before adding it to the scene.
4. Use a couple of the smaller trees, inking in Highland Heather and stamping off before
adding them to the scene.
5. Punch the top of the tag with the Delightful Tag Topper Punch.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 11 of 32
6. Cut approximately 9” or 23cm of Purple Posy Scalloped Linen Ribbon. Trim the scallop
from either side of the linen. Thread through the hole and tie.
7. Ink the sentiment from Itty Bitty Christmas and stamp onto the Purple Posy square:
a. Mask and ink or
b. Use your Highland Heather Stampin’ Write Marker.
8. Adhere the sentiment to the Highland Heather square with Multipurpose Glue.
9. Adhere the sentiment to the tag with a Dimensional.
10. Enjoy giving!
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 12 of 32
Snowman Season Card
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 13 of 32
Supplies:
Stamp set: Snowman Season
Ink/Coloring Tools: Memento, Pool Party, Stampin’ Blends: Light and Dark Flirty Flamingo; Light and Dark Pool Party; Light Pumpkin Pie
Paper: Let It Snow Designer Series Paper, Coastal Cabana, Real Red, Whisper White
Embellishments: Shimmery Crystal Effect
Tools: Stitched Nested Labels Dies, Paper Snips
Adhesives: Stampin’ Dimensionals, Multipurpose Liquid Glue
Measurements Imperial ★ Coastal Cabana
○ Card Base: 5-½” x 8-½” - scored and folded to 4-¼” x 5-½”
★ Let It Snow Designer Series Paper ○ Panel: 1-½” x 5-½”
★ Whisper White ○ Die Cut with 3rd Largest Stitched Nested Labels Die: 4-⅛”” x 2-3/8” ○ Sentiment: ¾” x 3”
★ Real Red ○ Strip: 5/16” x 5”
Measurements Metric ★ Coastal Cabana
○ Card Base: 14.8cm x 21cm - scored and folded to 10.5cm x 14.8cm
★ Let It Snow Designer Series Paper ○ Panel: 3.9cm x 14.8cm
★ Whisper White ○ Die Cut Stitched with 3rd Largest Nested Labels Die: 10.5cm x 6cm ○ Sentiment: 1.9cm x 7.6cm
★ Real Red ○ Strip: 0.8cm x 10cm
Directions:
1. Stamp the snowflakes design on the top left of the folded card in Pool Party ink.
2. Adhere Let It Snow DSP along the right hand side, then the Real Red strip horizontally
with Multipurpose Liquid Glue.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 14 of 32
3. Stamp the sentiment in Memento Ink. Colour with Flirty Flamingo Stampin’ Blends
Combo and fussy cut with Paper Snips.
4. Stamp the snowman design on the die cut topper in Memento and snowflakes in Pool
Party Ink.
5. Colour the topper with Flirty Flamingo Stampin’ Blends Combo, Pool Party Stampin’
Blends Combo and Light Pumpkin Pie Stampin’ Blends.
6. Adhere the topper with Stampin’ Dimensionals and the sentiment with Multipurpose
Liquid Glue.
7. Add Shimmery Crystal Effect to finish the card.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 15 of 32
Snowman Season Gift Card Holder
Supplies:
Stamp set: Snowman Season Stamp Set & Snowman Builder Punch Bundle
Ink/Coloring Tools: Memento, Pool Party Ink, Flirty Flamingo Stampin’ Blends Combo, Bermuda Bay Stampin’ Blends Combo, Lovely Lipstick Stampin’ Blends Combo, Light Pumpkin Pie Stampin’ Blends
Paper: (cardstock, designer, foils, etc)
Let It Snow Designer Series Paper, Coastal Cabana, Basic Black, Whisper White
Tools: Simply Scored, Detailed Trio Punch
Adhesives: Dimensionals, Multipurpose Glue
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 16 of 32
Measurements Imperial
★ Coastal Cabana ○ Holder: 4-½” x 5”
■ score on the long side at 1” & 3-¼” ■ Score on the short side at ½” & 4”
★ Let It Snow Designer Series Paper ○ Middle Strip: 1-½” x 5”
★ Whisper White ○ Snowman & Hat: 2-½” x 2-½”
★ Basic Black ○ Arms: 1-⅛” x 1-½”
Measurements Metric
★ Coastal Cabana Card ○ Holder: 11.4cm x 12.7cm
★ Let It Snow Designer Series Paper ○ Middle Strip: 3.8cm x 12.7cm
★ Whisper White Card ○ Snowman & Hat: 6.4cm x 6.4cm
★ Basic Black Card ○ Arms: 2.9cm x 3.8cm
Directions:
1. Cut sides of Coastal Cabana Card and use Detailed Trio Punch for the lid as shown
below on Photo (a).
2. Stamp the snowflakes in Pool Party Ink and sentiment in Memento for the inside of the
lid.
3. Adhere Let It Snow DSP in the middle with Multipurpose Liquid Glue and reinforce the
score lines.
4. Add glue only on the 1” / 2.5cm tabs. Fold and stick onto the main body as shown below
on Photo (b).
5. Stamp the snowman and hat in Memento Ink and colour with Flirty Flamingo Stampin’
Blends Combo, Bermuda Bay Stampin’ Blends Combo, Lovely Lipstick Stampin’ Blends
Combo, Light Pumpkin Pie Stampin’ Blends.
6. Punch the coloured images and Basic Black Card with Snowman Builder Punch.
7. Adhere the arms and hat with Multipurpose Liquid Glue then the whole snowman with
Stampin’ Dimensionals.
8. Secure with another Stampin’ Dimensional when ready to gift to someone.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 17 of 32
(a)
(b)
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 18 of 32
Rustic Toile
Supplies:
Stamp set (or bundle): Rustic Retreat
Ink/Coloring Tools: Crumb Cake, Garden Green
Paper: Garden Green, Real Red, Very Vanilla, Gold Foil,Toile Tidings Designer Series Paper
Embellishments: Linen Thread
Tools: Stitched Shapes Dies, Layering Ovals Dies, Decorative Ribbon Border Punch
Adhesives: Multipurpose Liquid Glue, Stampin Dimensionals
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 19 of 32
Measurements ★ Garden Green
○ Card Base: 5-½” x 8-½” - scored and folded to 4-¼” x 5-½” ○ Strip Mat: 5” x 1 ½”
★ Real Red ○ Layer 1: 4” x 5- ¼”
★ Toile Tidings Designer Series Paper ○ Layer 2: 3 ¾” x 5” ○ Strip: 5” x 1 ¼”
★ Gold Foil/Very Vanilla ○ Gold 5” x 1” (Decorative Ribbon Border Punch) ○ Gold Scalloped Oval ○ Very Vanilla Stitched Oval (Not the Largest) with sentiment
Measurements ★ Garden Green
○ Card Base: 14.8cm x 21cm - scored and folded to 14.8cm x 10.5cm ○ Strip Mat: 9.9cm x 3.8cm
★ Real Red ○ Layer 1: 10.2cm x 14.5cm
★ Toile Tidings ○ Layer 2: 9.9cm x 14.2cm ○ Strip: 9.9cm x 2.9cm
★ Gold Foil/Very Vanilla ○ Gold 9.9cm x 3.8cm (Decorative Ribbon Border Punch) ○ Gold Scalloped Oval ○ Very Vanilla Stitched Oval (not the largest) with sentiment
Directions:
1. Adhere DSP to Real Red Card Stock
2. Adhere DSP Strip to Garden Green Strip
3. Adhere Gold Foil Decorative Ribbon Border to back of Garden Green Strip so that the
small scallop peaks out from bottom.
4. Adhere Strip towards bottom of card.
5. Stamp Sentiment in Crumb Cake ink On Very Vanilla
6. Stamp Pine Boughs around sentiment in Garden Green
7. Die Cut above with Large Stitched Oval
8. Layer above onto Gold Foil Scalloped Oval.
9. Wrap double strand of Linen Thread around card front and tie Bow to the left.
10. Adhere Oval in center with Stampin’ Dimensionals.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 20 of 32
Rustic Christmas
Supplies:
Stamp set (or bundle): Rustic Retreat, Birch Background Stamp
Ink/Coloring Tools: Soft Suede, Garden Green, Versamark
Paper: Garden Green, Cherry Cobbler, Very Vanilla, Gold Foil,Toile Tidings Designer Series Paper
Embellishments: Linen Thread, Gold Stampin’ Emboss Powder
Tools: Stitched Shapes Dies, Starburst Punch, Decorative Ribbon Border Punch, Banner Triple Punch
Adhesives: Multipurpose Liquid Glue, Stampin Dimensionals
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 21 of 32
Measurements ★ Crumb Cake
○ Card Base: 5-½” x 8-½” - scored and folded to 4-¼” x 5-½” ○ Strip: 4 ¼” x 1 ¾”
★ Cherry Cobbler ○ Layer 1: 4” x 5- ¼” ○ Scrap for Starburst Punch
★ Toile Tidings Designer Series Paper (Buffalo Plaid Garden Green Pattern) ○ Layer 2: 3 ¾” x 5”
★ Gold Foil/Very Vanilla ○ Gold Foil ½” Strip Punched with Banner Triple Punch ○ Very Vanilla Stitched Circle (Not the Largest) with sentiment
★ Garden Green ○ Strip: 1 ½” x 3 ¼”
Measurements ★ Garden Green
○ Card Base: 14.8cm x 21cm - scored and folded to 14.8cm x 10.5cm ○ Strip: 10.5cm x 4.9cm
★ Cherry Cobbler ○ Layer 1: 10.2cm x 14.5cm ○ Scrap for Starburst Punch
★ Toile Tidings Designer Series Paper (Buffalo Plaid Garden Green Pattern) ○ Layer 2: 9.9cm x 14.2cm
★ Gold Foil/Very Vanilla ○ Gold 1.3cm Banner Triple Punch ○ Very Vanilla Stitched Circle (not the largest) with sentiment
★ Garden Green ○ Strip: 3.9cm x 8.2cm
Directions:
1. Stamp Birch Background Stamp on Crumb Cake Cardstock in Soft Suede ink, set aside.
2. Stamp Pine Boughs with Garden Green ink on Garden Garden Cardstock. Set Aside.
3. Stamp sentiment with Versamark ink and use Gold Stampin’ Emboss Powder to Heat
Emboss on Very Vanilla.
4. Die Cut sentiment with Stitched Circle Die.
5. Adhere sentiment onto Cherry Cobbler Starburst.
6. Adhere Gold foil banners to back of Starburst.
7. Adhere Birch stamped strip to the left of card front.
8. Adhere Garden Green stamped strip so that it overlaps the birch strip.
9. Wrap double strand of Linen Thread and tie bow towards top.
10. Adhere Buffalo Plaid card front to Cherry Cobbler Layer and adhere to card base.
11. Adhere sentiment with Stampin’ Dimensionals.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 22 of 32
Feels Like Frost
Supplies:
Stamp set (or bundle): Frosted Foliage Bundle
Ink/Coloring Tools: Versamark
Paper: Seaside Spray, Whisper White, Feels Like Frost
Embellishments: Stampin’ Emboss Silver Powder, Basic Jewels clear
Tools: Dies Cutting Machine, Heat Tool
Adhesives: Multipurpose Liquid Glue, Stampin Dimensionals
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 23 of 32
Measurements ★ Whisper White
○ Card Base: 5-½” x 8-½” - scored and folded to 4-¼” x 5-½” ○ Layer 3” x 5” ○ Scrap for Stamping Sentiment
★ Seaside Spray ○ Layer 2 ⅜” x 2 6/8” ○ Scrap for Snowflakes
★ Feels like Frost
★ Silver and White strip 4 ¼” x ½”
Measurements ★ Whisper White
○ Card Base: 14.8cm x 21cm - scored and folded to 14.8cm x 10.5cm ○ Layer 7.5cm x 13cm ○ Scrap for sentiment
★ Seaside Spray ○ Layer 6cm x 6.5cm ○ Scrap for Snowflakes
★ Feels Like Frost ○ Silver and White strip 1.5cm x 11cm
Directions:
1. Stamp Snowflake images in a random fashion with the Versamark ink and use Silver
Stampin’ Emboss Powder to Heat Emboss on Whisper White Layer.
2. Stamp Chosen sentiment with the Versamark ink and use Silver Stampin’ Emboss
Powder to Heat Emboss on Whisper White Layer and dies cut using the framed die from
the Bundle.
3. Adhere striped strip to card base
4. Adhere Snowflake embossed layer to the card base using Stampin’ Dimensionals.
5. Adhere the die cut to the Seaside Spray piece using Multipurpose Liquid Glue and
adhere this on top of the Snowflake piece.
6. Die cut Snowflakes from the Seaside Spray piece and adhere to the Embossed
Snowflake layer.
7. Finish with Rhinestones.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 24 of 32
Feels Like Frost
Card 2
Supplies:
Stamp set (or bundle): Frosted Foliage Bundle
Ink/Coloring Tools: Night of Navy Ink Pad
Paper: Whisper White, Feels Like Frost
Embellishments: Holiday Rhinestones Basic Jewels
Tools: Dies Cutting Machine
Adhesives: Multipurpose Liquid Glue, Stampin Dimensionals
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 25 of 32
Measurements ★ Whisper White
○ Card Base: 5-½” x 8-½” - scored and folded to 4-¼” x 5-½” ○ Half a sheet of card stock for Stamping Sentiment and Die cutting
★ Feels Like Frost: one sheet of your choice 4”x 5 ¼”
Measurements ★ Whisper White
○ Card Base: 14.8cm x 21cm - scored and folded to 14.8cm x 10.5cm ○ Half a sheet of card stock for Stamping Sentiment and Die cutting
★ Feels Like Frost: one sheet of your choice 10cm x 14.2cm
Directions:
1. Trim your choice of design from the designer paper and adhere to the card base
2. Stamp Sentiment of your choice in Night of Navy Ink onto Whisper White
3. Die cut sentiment with the stitched frame from the bundle.
4. Die Cut the frame die from Whisper White and adhere this to the card base on top of
designer paper using Multipurpose Glue
5. Adhere the sentiment on top of the fancy frame using Stampin’ Dimensionals.
6. Finish with Rhinestones.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 26 of 32
Snowman Season - Merry Christmas Card
Supplies:
Stamp set: Snowman Season Bundle (with Builder Punch)
Ink/Coloring Tools: Memento Black, Versamark, Real Red Blends Duo, Calypso Coral Blends Dark, Pool Party Blends Duo, Shaded Spruce Blends
Paper: Real Red, Whisper White, Coastal Cabana, Let It Snow Specialty Designer Series Paper
Embellishments: Pearl Basics
Tools: Bone Folder, Tufted Embossing Folder, Stitched Rectangle Dies, White Embossing Powder, Snowfall Accents Puff Paint, Heat Tool
Adhesives: Mini Dimensionals, Multipurpose Liquid Glue
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 27 of 32
Measurements ★ Real Red
○ Card Base: 8 ½” x 5 ½” Scored at 4 ¼” ○ Sentiment: 1 ½” x 3”
★ Whisper White ○ Layer 1: 8 ⅜” x 4 ⅛” ○ Snowman: 3” x 4” (before cutting out with rectangle die)
★ Let It Snow Designer Series Paper ○ Strip 1: ¾” x 3” ○ Strip 2: 1 ¼” x 3 ¾” ○ Strip 3: 1” x 3”
Directions:
1. Fold card on score line. Adhere Whisper White layer to card front.
2. Emboss Coastal Cabana layer with Tufted Embossing Folder. Adhere to card.
3. Adhere layers of Let It Snow Designer Series Paper on to card front.
4. Stamp snowman image in Memento Black ink on Whisper White cardstock. Color with
blends. Use Stitched Rectangle dies to cut out (2 ¼” x 3 1/” finished size)
5. Apply a SMALL amount of Snowfall Accents Puffy Paint to snow, heat with heat tool until
set and puffy. If you have not used the paint before, I do recommend practicing on scrap
paper first to get a feel for it) Adhere to front of card.
6. Stamp sentiment in Versamark ink on Real Red card stock, and heat emboss with White
Embossing Powder. Fussy cut around the image and mount on to card using Mini
Dimensionals.
7. Embellish with Mini Pearls
8. Enjoy!
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 28 of 32
Snowman Season - 2-4-6-8 box with lid
Supplies:
Stamp set: Snowman Season Bundle (with Builder Punch), Everyday Label Punch
Ink/Coloring Tools: Memento Black, Stampin’ Blends” Real Red Blends Duo; Dark Calypso Coral; Pool Party Blends Duo; Dakr Shaded Spruce; Balmy Blue Blends Duo
Paper: Real Red, Whisper White, Coastal Cabana, Let It Snow Specialty Designer Series Paper
Embellishments:
Tools: Bone Folder, Tufted Embossing Folder, Scissors
Adhesives: Mini Dimensionals, Multipurpose Liquid Glue
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 29 of 32
Measurements ★ Real Red
○ Box: 8 ½” x 5 ½” (scored at 2”,4” ,6”, 8”, turn and score at 2”) ○ Box Top: 3” x 3” (scored at ½” on all 4 sides - SEE PHOTO BELOW FIRST)
★ Coastal Cabana ○ Box layer: 4 @ 1 ⅞” x 3 ⅜” ○ Box Top: 1 ⅞” x 1 ⅞” ○ Label: 2” x 4” scrap
★ Let It Snow Designer Series Paper ○ Box layer: 1 ¾” x 3 ¼” ○ Box Top: 1 ¾” x 1 ¾”
Directions:
1. Score Real Red box at 2”, 4”, 6”, 8”, turn 90 degrees and score at 2”. Cut along score
lines as shown in photo below.
2. Adhere layers of Coastal Cabana and Let It Snow Paper on to each side panel of the
box.
3. Punch label from Coastal Cabana, emboss with Tufted Embossing Folder. Adhere to
one of the side panels.
4. Stamp snowman image in Memento Black ink on Whisper White cardstock. Color with
blends. Use punch to punch out individual pieces. Assemble Snowman and adhere to
Coastal Cabana Punch.
5. Apply glue on to small tab to create box. Fold bottom flaps up and glue to each other to
create box bottom.
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 30 of 32
6. Score and cut 3” x 3” Real Red box top as shown below. NOTE, score just shy of the ½”
mark on the trimmer, this will allow just room for the allowance of the additional layers on
the box.
7. Adhere Coastal Cabana layer and Let It Snow Designer Series Paper later to top of box
top.
8. Apply a small amount of glue on small tabs, fold in and glue to side to create box top.
9. Enjoy!
Winter Wonderland
Stampin Glam Squad October 2019 Tutorial Bundle
Page 31 of 32
Quick Note
I would love you to share your completed projects with your friends and for you to tell them about the
Stampin Glam Squad Tutorial Bundle.
But please kindly keep the tutorial bundle for personal use.
These tutorials should not be shared, resold or reproduced in any way.
I am grateful for your support and appreciate your respect of the time and creativity needed to produce a
quality product for you to create with.