Winter service ArtiÞcial t Natural turf ArtiÞcial - NH-Koneet · ArtiÞcial ArtiÞcial t Dirt...

ArtificialArtificial t

Dirt removal

Natural turf

RemoNatural t

Winter se

Winter serviceThe Complete Programme

Machines for professional turf and golf course maintenance,

dirt removal and winter service.

The perfect solution.The perfect turf.The perfect game.

Table of contents

The perfect solution. Company

About us 4 | 5

Natural turf

Turf regeneration 6 | 7

TERRA SPIKE® GXi 6 / GXi 8 HD 8

TERRA SPIKE® XF 9

TERRA SPIKE® XD 10

TERRA SPIKE® XP 11

Greens TERRA SPIKE® 12

CORE RECYCLER 13

Turf maintenance 14

TERRA SLIT / TERRA FLOAT 15

TERRA SEED / TERRA RAKE 16

TERRA BRUSH / TERRA GROOM 17

SUPER 500 18

SUPER 600 19

Lawn mowers 20

SUPER PRO TXL-S / SUPER PRO TXL-H 21

SUPER PRO FXL-S / SUPER PRO FXL-H 22

RMR 230 V 23

FLEX CUT® 24

Removal of grass and leaves

FAVORIT 650 27

FAVORIT XP 28

RK 120 Z 29

WHISPER TWISTER 30

MEGA TWISTER 31

Artificial turf

Artificial turf maintenance 32

TERRA RAKE 33

TERRA BRUSH / TERRA GROOM 34

TERRA CLEAN 100 35

TERRA CLEAN 120 36

TERRA CLEAN 160 37

Snow and dirt removal

Road sweepers 38

COMBI CLEAN 2350 COMBI CLEAN 2600

39

Snow rake blades 40

SNOW MASTER 3400SNOW MASTER 3800

41

SNOW MASTER 3850/3900 42

VARIO 3350 43

Gritting equipment 44

ICE MASTER 45

Service and wearing parts

Service 46

Wearing parts 47

Wiedenmann GmbH:Solutions as diverse as the seasons.

Whether spring, summer, autumn or winter – whether professional turf and golf course maintenance, dirt clearance or snow removal services: you can rely on machines from Wiedenmann in every season.

True to our guiding principle “Only the best for the customer”, our versatile accessory equipment programme for compact tractors and light commercial vehicles offers opti-mal, demand-driven solutions for both commercial as well as municipal customers. The emphasis of the product line is on machines for turf regeneration, for taking up and removing grass and leaves, mowing machines and turf sweepers as well as snow and dirt sweepers, snow rake blades and winter gritting equipment.

As one of the world-wide leading manufacturers, our approximately 245 employees in the German town of Rammingen near Ulm as well as in the Hungarian town of Beled regularly set new standards of innovative technologies and uncompromi-sing quality. Numerous innovation prizes, patents and proprietary rights testify

the high-performance expectations of the family-owned company founded in 1964. With a far-sighted vision, we continually invest a substantial part of

our annual turnover in research and development. This means that today we can already offer you the solutions of tomorrow.

Horst Wiedenmann Uwe Wiedenmann Jürgen Wiedenmann

About us

4 | 5

Production site Beled in Hungary

About us

Ideas for tomorrow. With the know-how of today.

Innovation already begins in the development phase. This is why our engineers exclusively use state-of-the-art 3D-CAD technology to exclude any possible weak points in the development process. Changes in the form or parts can be made without manufacturing expensive samples. Dimension accuracy up to a thousandth of a millimetre, and the ability to rapidly create and modify drawings are additional advantages of this design method. This decisively reduces the development time and costs of a new product, resulting in a less expensive sales price for you.

Every new development must prove itself in a long test phase of extensive and rough practical trials, and they must meet the development target to one hundred per cent. Only then will they be released for production. Each machine is carefully assembled to meet specific customer require-ments. Then an intensive final inspection is conducted. Finally, every machine is packed for safe transport and prepared for on-time shipment to the customer.

As a manufacturer of machines for turf maintenance and municipal technology, we have a special responsibility to apply environmentally friendly production processes. We meet this demand for avoiding pollution and leaving the smallest possible environmental burden with our fully-automatic paint spray and degreasing plant. All components are prepared by an organic phosphating coating process. The phosphate coating acts as a protective shield against environmental influences such as moisture, acids etc. and simultaneously serves as the optimal basis for the subsequent painting procedure. The prepared parts are subsequently painted by powder coating. Electrostatically charged coloured powder particles are sprayed on and burned in at about 220 °C. The powder melts and forms an extremely shock and scratch-resistant coat of paint. Even part deformation does not chip off the coating.

Nature also benefits from this process, since no residues and emissions arise with this type of degreasing. Moreover, we only process electrolytically galvanized materials – up to sheet thickness of 3 mm. All cited work steps serve to provide optimal corrosion protection and the sustainable function of our machines.

Company headquarters in Rammingen near Ulm, Germany

Turf regeneration

The fitness programme for your turf.

The available time for sport and golf course maintenance is becoming ever scar-cer. And this with ever greater expectations on the quality of the turf. Regular soil loo sen ing and depth ventilation can achieve optimal conditions for healthy root growth. By breaking open compactions, the roots can penetrate deeper into the

ground and hence make better use of water and nutrients. The water flow and the air balance are improved, thatch is eliminated, and the shear strength is

increased.

Previously, this maintenance work was enormously time-consuming and stressful. Wiedenmann revolutionized turf maintenance with

innovative solutions and has ever since been setting the standard with regard to speed, productivity, and performance. These im-

provements provide immense time, energy and cost savings for your necessary turf care.

Quality by professionals. For professionals.

6 | 7

VibraStop

VibraStop provides a uniquely smooth-running operation. It protects the driver from vibrations and the tractor as well as tools from damage by knocks and shocks. VibraStop corresponds to the EU Directive 78/764/EEC with respect to whole body vibrations.

PowerPack

PowerPack likewise absorbs shocks and vibrations. It also contributes to the effective protection of the driver from vibrations. Tractor and machine are simultaneously reliably protected against harmful peak loads.

TwinDrive

TwinDrive symmetrically introduces force from both sides to the robust, continuous crankshaft. If harmful load peaks occur during work, e.g. if the tines strike a stone, the forces are absorbed by the special two-sided V-ribbed belt.

QuickSet

Thanks to QuickSet, work depth and loosening angle of all TERRA SPIKE® models can be adjusted tool-free with three cranks and a few manual operations. The broad range of adjustment of the loosening angle from 90° – 65° lets you optimally adapt the loosening intensity to specific ground conditions and degree of compaction.

QuickFit

The tine mount is conically formed for TERRA SPIKE®, giving the tines an absolutely firm seat. The full or hollow tines are assembled or disassembled rapidly and effortlessly by the QuickFit integrated tine attachment and extraction system.

ATC Control

ATC (Advanced Tine Control) controls the precise incision of the tines and ensures uniform hole spacing, even at high working speeds. All movable parts of the ATC tines control are assembled completely outside the working and dirt area of the tines.

Exclusively from Wiedenmann:More innovations for more comfort.

Turf regeneration

· 3.2 km/h working speed with 110 mm square hole spacing· Up to 25 cm work depth· Working width about 140 (GXi 6) and 180 cm (GXi 8 HD)· Area coverage per hour at 110 mm square hole spacing 4,500 (GXi 6) and 5,800 m2/h (GXi 8 HD) · With VibraStop, PowerPack, QuickSet, QuickFit· Minimal maintenance effort (only 6 lubricating points)

HighlightsHighlights

For deep aeration and removal of compactions up to 25 cm depth.

The TERRA SPIKE® GXi was especially developed for use on golf greens, tees, and sandy sports fields as well as other fine lawns. Its gentle working procedure is equally popular for users and players because it does not interrupt or impair game operations.

The compact mounting is suitable for tractors from 15 kW (20 HP) and allows large area coverage with simultaneously impressive work quality. Two scales and three cranks ensure easy setting of work depth and incision angle.

Optional equipment:Full tines, hollow tines, multi-tine bearer, holding-down clamp, swath board, supplementary weight

TERRA SPIKE® GXi 6 / GXi 8 HD

Hollow tines, full tines, multi-tine bearer

TERRA SPIKE® GXi 6

Hole pattern after deep aeration

Holding-down clamp

8 | 9

· Up to 6 km/h working speed· Up to 22 cm work depth· Working width about 160 (XF 6) and 210 cm (XF 8)· Area coverage per hour with 130 mm square hole spacing 6,000 (XF 6) and 7,980 m2/h (XF 8)· With VibraStop, PowerPack, TwinDrive, QuickSet, QuickFit



The TERRA SPIKE® XF is the king of the deep aerators. It will loosen and aerate your turf at a work-ing speed of up to 6 km/h. Thanks to VibraStop and PowerPack, it is uniquely smooth-running.

The encapsulated TwinDrive propulsion, the simple setting of the working depth up to 22 cm as well as the tool-free adjustment of the loosening angle with the QuickSet System and the inte-grated tine attachment and removal system QuickFit has found favour across the entire line.

Optional equipment:Full tines, hollow tines, multi-tine bearer, holding-down clamp, swath board, hydraulic roller brushes

TERRA SPIKE® XF

TERRA SPIKE® XF in use

Hydraulic roller brushes

QuickSet


· Up to 4 km/h working speed· Up to 27.5 cm working depth· Working width about 160 (XD 6) and 210 cm (XD 8)· Area coverage per hour for 130 mm square hole spacing 4,200 (XD 6) and 5,600 m2/h (XD 8)· With VibraStop, PowerPack, TwinDrive, QuickSet, QuickFit


For deep aeration and removal of compactions up to a depth of 27.5 cm.

Loosen and aerate your turf with a working speed of up to 4 km/h. And this with uniquely smooth-running operation thanks to the two damping systems VibraStop and PowerPack.

The work depth is set simply and tool-free by means of a hand crank. Optionally, the work depth can be set hydraulically from the tractor cab – also during the work.

Optional equipment:Full tines, hollow tines, multi-tine bearer, holding-down clamp, swath board

TERRA SPIKE® XD

TERRA SPIKE® XD

Adjustable incision angle

TwinDrive


10 | 11

· 1.5 km/h working speed for 130 mm square hole spacing· Up to 40 cm work depth· Working width about 160 (XP 6) and 210 cm (XP 8)· Area coverage per hour for 130 mm square hole spacing 2,400 (XP 6) and 3,150 m2/h (XP 8)· mit VibraStop, PowerPack, QuickSet, QuickFit· 3-gear transmisson



The TERRA SPIKE® XP is distinguished by its work depth of up to 40 cm, its working speed, the exceptional quality of work and the ease of operation. With two scales and three cranks, you always have the central depth adjustment and central incision angle adjustment under control.

A robust 3 -gear transmission permits you to exactly set the desired hole spacing harmonised to the desired working speed and number of tines.

Optional equipment:Full tines, hollow tines, multi-tine bearer, holding-down clamp, swath board, carriage, hydraulic roller brushes, hydraulic depth adjustment, supplementary weight

TERRA SPIKE® XP

3-gear transmisson

Hydraulic depth adjustment

Swath board


· 2.5 km/h working speed for 130 mm square hole spacing· Up to 30 cm work depth· Working width about 135 (G6/135) and 160 cm (G6/160)· Area coverage per hour for 130 mm square hole spacing 3,700 (G6/135) and 5,000 m2/h (G6/160)· With VibraStop, PowerPack, QuickSet, QuickFit· 3-gear transmission



The Greens TERRA SPIKE® is predominantly used on golf greens and other fine lawns. It meets the highest requirements on work quality and operating friendliness.

Along with many additional excellent performance characteristics, its working depth of up to 30 cm makes it a reliable companion for green keeper and grounds man.

Optional equipment:Full tines, hollow tines, multi-tine bearer, holding-down clamp, swath board, hydraulic roller brushes, supplementary weight

Greens TERRA SPIKE®

Greens TERRA SPIKE®

Tine holder


12 | 13

· Hand-held machine with internal combustion engine and hydrostatic propulsion unit (continuously variable 0 – 6 km/h)· Hydraulic propulsion of drum screens and sweeping unit· Hydraulic tip-up emptying (unloading height about 150 cm) · Working width about 120 cm


Collection/separator combination for collecting and processing cores.

The CORE RECYCLER is a unique machine on the market for golf greens and tees. Its sweeping head unit gently takes up cores that have been previously punched out and transfers them to the separator. This unit consists of four turning, individually settable drum screens. Rough organic components such as thatch are separated from the bound sand. The sand is subsequently returned to the earth and the organic mass is pitched into the collecting container. This action means a con-siderable time and cost saving for surface sanding, since up to 80 % of the valuable sand/ground mixture is reintroduced into the turf.

Additionally, the CORE RECYCLER can be employed for core collection when the separating func-tion of the sieves is switched off with special inserts.

Optional equipment:Transportation system with hydraulically tiltable loading surface and rapid locking system (for mounting to utility vehicles)

CORE RECYCLER

Four drum screens

Hydraulic tip-up emptying

Optional transportation system

The world innovation

of Wiedenmann!

Turf maintenance

The right touch for turf maintenance.

14 | 15

TERRA SLIT / TERRA FLOAT

· Up to 20 cm work depth· Working width about 160 cm· Flexible use with ripper tines, fine-cut knives, or hollow tines

· Up to 3 cm work depth· Working width about 160 cm

Loosening, slitting or aerification.

Effectively eliminates soil compaction up to 20 cm depth. The device can be equip-ped with standard or high-lift knives depending on degree of compression and soil conditions. For slitting up to a depth of 15 cm, it can also be equipped with fine-cut knives and with hollow tines up to a depth of 8 cm for cutting out thatch.

Optional equipment:Standard loosening, intensive loosening, fine-cut knives, hollow tines, follow-up roller, supplementary weight, hydraulic weight transfer system, carriage

Spiking, aerating and overseeding.

The device can be alternatively equipped with a tool roller with spiking or star segments. The three-part, oscillating sus -pension adapts well to undulating ground and ensures uniform work depth. In a single pass, the spiking segment with full tines (hole spacing 3 cm) pro duces an unbeatable 1,500 holes per m2, the serrated star segments 500 slits per m2.

Optional equipment:Full tines, star segment, overseeding unit, spring tines for overseeding unit, follow-up roller, supplementary weight, carriage



Ripper tines

With overseeding unit and carriage

Hollow tines

Three-part, oscillating tool roller

Hole pattern with spiking segment

The right touch for

· Working width about 160 cm· Work depth up to 5 mm· Seed container with 140 l volume· Only 14 cm between seed discharge and ground

· Working speed up to 12 km/h· Working width about 160 and 210 cm· Rollers for fine-tuning the scarifying depth

Turf overseeding system.

The special spring tines of TERRA SEED open up the ground surface. The inte-grated agitator shaft ensures a uniform, stripe-free distribution of seeds. The following parallelogram-guided seed brush returns the seeds into the spring tine groove. The subsequent seed roller presses the seeds into the ground.

Optional equipment:Lateral pneumatic guidance wheels

Harrow.

The parallelogram-suspended spring steel tines of the TERRA RAKE are put into aggressive vibration, whereby they pull the thatch out of the sod. These scarifying tines are arranged in five rows, so that despite the fine row spacing of only 16 mm enough space for obstruction-free work is available.

Optional equipment:Relief kit to reduce tine depth of penetration



TERRA SEED / TERRA RAKE

Dosing lever

Seed container

Scarifying tines arranged in five rows

Parallelogram guidance

Transport position

16 | 17

Anti-scalp roll

Swivel suspended side boom

TERRA BRUSH / TERRA GROOM

· High area coverage thanks to flexible working width of about 187 cm (basic machine) or about 405 cm with suspended swivel side boom· For a more uniform wear of the brushes, the 3-point mounting frame and drawbar can also be mounted in opposite directions

· Chassis with electrical lifting· Three pivoting brush rails permit uniform wear of the brushes· Only 90 kg total weight· Working width about 187 cm

Multifunctional brush.

The TERRA BRUSH is suitable for brushing sand and other top-dress materials, for levelling and pulverizing cores, dispersing dew and improving the ball-rolling quality.

Optional equipment:Special soft and hard brushes, side boom, mounting for 3-point tractor rear end or for carriage and drawbar, hydrau-lic or electrical lifting, anti-scalp rolls


The TERRA GROOM reliably brushes sand and other materials and levels the surface. By pulverizing possible cores, it ensures uniform turf surfaces.

Optional equipment:Special soft and hard brushes, rear end 3-point mounting for tractors or with carriage and drawbar, ball hitch attachment



TERRA BRUSH with side boom

White brushes for fine lawns

Chassis with electric lifting

Attachment variants

SUPER 500

· Working width about 160 cm· Holding capacity about 2 m3

· Hydraulic high dumping up to about 210 cm


Universal turf maintenance machine.

Turf sweeping, flail mowing, raking or grass and leaf pick-up: the SUPER 500 is suited for almost every field of application. The float-mounted cleaning head adapts excellently to ground uneven-ness. With tool-free change of the wing, cleaning, sledge and scarifying knives.

Optional equipment:Electromagnetic remote control, pendulum chassis, lighting, lateral anti-scalp rolls, Golf Course Kit, Super Contour Kit, Core Crusher Kit

Gentle turf leaf take-up

Brush cleaning head

Brush cleaning head or multi-sweeper head

18 | 19

Universal turf maintenance machine.

The SUPER 600 is compact, robust, and a true multi-talent for intensive use from spring to autumn. It is reliable for all maintenance work such as turf sweeping, flail mowing, and raking as well as grass and leaf pick-up. Due to the parallelogram guidance of the take-up unit, the tools are always located in an optimal work position.

Optional equipment:Lateral anti-scalp rolls, Golf Course Kit, Super Contour Kit, Core Crusher Kit

· Working width about 160 cm· Holding capacity about 4.5 m3

· Continuously variable, hydraulic high dumping up to about 210 cm


Hydraulic high dumping

Swivel axle with 4-fold tyres

SUPER 600

Lawn mowers

That great feeling when everything is perfect.

20 | 21

SUPER PRO TXL-S / SUPER PRO TXL-H

· Working width about 130, 150 and 180 cm· Anti-scalp rolls are standard· High smooth-running and uniform cutting appearance with four large contact wheels· Special coated DuraBlade quality knives

· Working width about 130, 150 and 180 cm· Standard anti-scalp rolls· Very smooth running and a uniform cutting appearance with four large contact wheels· Special coated DuraBlade quality knives

Sickle mower with side ejection.

The SUPER PRO TXL-S is a robust pro-fessional mower with excellent cutting results at low noise emission.

The rounded, integrated mowing deck edges ensure fluid and obstruction-free grass flow. The wedge-shaped ejection channel guarantees reliable ejection of the cuttings – especially also for wet and dense grass.

Sickle mower with rear ejection.

The SUPER PRO TXL-H stands out with high performance and low noise emis-sion. Also for cornering, the innovative mowing deck geometry results in an especially clean grass cut and a uniform transverse distribution of the cuttings. The grass flow is fluid and obstruction-free.

Optional equipment:Mulch Star for use as recycling mower



DuraBlade quality knives / wing and mulch knives

Tiltable mowing deck

Mowing tiltable deck

Wedge-shaped ejection channel

Front view

· Working width about 150 and 180 cm· Standard anti-scalp rolls · Wedge-shaped ejection channel for obstruction-free grass flow· Special coated DuraBlade quality knives

· Working width about 130, 150 and 180 cm· Standard anti-scalp rolls· All-around anti-ram protection· Special coated DuraBlade quality knives· Tiltable mowing deck

Sickle mower with side ejection.

The SUPER PRO FXL-S is a robust professional mower which delivers outstanding cutting results at low noise emission. The mowing deck is supported between two large contact wheels in the front and on the rear by the front wheels of your front mower. The smooth running of the mowing deck ensures a uniform cutting appearance of the turf.

Sickle mower with rear ejection.

The SUPER PRO FXL-H is a robust machine with high working efficiency and low noise emission. The ingenious mowing deck geometry ensures fluid, obstruction-free grass flow.




SUPER PRO FXL-S / SUPER PRO FXL-H


Tiltable mowing deck

Wedge-shaped ejection channel

All-around anti-ram protection

22 | 23

Mounting on front mowers and compact tractors

Side parts are retractable

Front power take-off propulsion


· Working width about 230 or 140 cm with retracted side sections· Sides units swivelling by 10° for optimal ground adaptation· Special coated DuraBlade quality knives· Friction discs for protecting the knives from damage· Transport width about 185 cm


Rear ejection/recycling mower for rough long-term use.

The RMR 230 V is a robust professional mowing deck with high-area coverage and low noise emission. With a working width of 230 cm, it offers about 30 % greater area coverage than a mowing deck with 180 cm cutting width. This means fewer passes, fewer driving lanes, and less soil compaction.

High overlapping between the blades ensures the uniform transverse distribution of the cuttings and stripe-free mowing, also for tight cornering. The rounded mowing cover edges integrated in the mowing deck permit fluid, obstruction-free grass flow. Four standard anti-scalp rolls also protect the sod from mechanical damage on uneven ground. The mowing deck can be tilted up for maintenance work.

Optional equipment:Mulch Star for use as a recycling mower

RMR 230 V

· Working width about 230 cm· Two movable mowing decks, independent of each other· Special coated DuraBlade quality knives· Rear 3-point mounting


Rear ejection/recycling mower for large surfaces.

Thanks to the FLEX CUT® with 230 cm cutting width, you can now mow large surfaces such as sports fields, park grounds or roughs and semiroughs in the shortest time. Two movable decks, in-dependent of each other, with two blades each make this mower extremely versatile, while ensur-ing ideal ground adaptation. The suspension apparatus attached in the middle reliably prevents a layered cut.

The maintenance-free deck drive has self-tightening v-belts. The transfer gear is integrated in the middle of the frame. The deck is guided by three wheels (11 x 4) each and two additional anti-scalp rolls. The support of the deck with stable joint balls ensures the optimal mobility of the individual decks in the robust supporting frame.


FLEX CUT®


Two independent, movable decks

FLEX CUT® in use

Optional Mulch Star

Removing grass and leaves

New standards in perfor-mance, cost effectiveness, and noise reduction.

26 | 27

· Hydraulic ground (650 T) or high dumping (650 H) up to about 180 cm· Holding capacity 600 l (650 T) and 600 or 850 l (650 H)· Container with large air discharge grille for obstruction-free work· Compact, low-weight addition· Mechanical locking· Simple double belt drive without tightener pulley


Grass and leaf collector with whisper turbine and high payload.

The FAVORIT 650 is ideally suited for vacuuming up great amounts grass – and thanks to the whisper turbine, also in noise-sensitive surroundings. The low-noise, high-vacuum, 6-winged high-perfor-mance turbine is positioned laterally and allows the favourable air flow course of the inlet hose. The grass flow within the turbine is optimised by the conical construction of the turbine housing.

The massive, high-strength wing blades provide high wear resistance. The downwards drawn air-conducting channel, favourable to air flow, is furnished with a large air discharge grille. The dust contained in the exhaust air as well as the escaping noise are directly dissipated into the sod, thus considerably reducing the noise level.

Optional equipment:Manual suction removal, lighting, filling level indicator

FAVORIT 650

Belt drive without tightener pulley


· Holding capacity 1,200 or 1,500 l· Hydraulic high dumping up to about 200 cm· Conically-formed turbine bearing housing for excellent grass flow· Container with large air discharge grille for obstruction-free work· Mechanical locking· Air tyres are standard


Professional grass and leaf collector for maximum performance.

With its noise-reduced suction turbine, the FAVORIT XP stands out with typical Wiedenmann high suction power. Large amounts of grass – also in noise-sensitive surroundings such as schools, hospitals, senior citizen facilities or residential areas – are no problem.

The high moment of inertia of the turbine is favourable for delivering great amounts of grass. Load peaks are compensated. The massive, high-strength wing blades provide high wear resistance. The suction unit has a protection device to prevent injuries. It is additionally equipped with a safety flap.

Optional equipment:Manual removal by suction, lighting, filling level indicator

FAVORIT XP

Intake fittings favourable to air flow

Manual removal by suction


28 | 29

· Working width about 120 cm· Holding capacity about 1.6 m3

· Rear 3-point attachment (semi-borne)


Universal sweeping machine for turf maintenance and leaf removal.

The RK 120 Z thoroughly sweeps mowed material together and simultaneously gently disentangles the turf. It removes everything which could impair or damage the turf. The cylindrical cleaning brush is equipped with four brush rails and is exactly adjustable to the ground. The bristle abrasion is compensated by resetting the side bearing to the baffle plate.

The RK 120 Z produces a strong air stream which ensures the reliable transport of the swept ma-terials into the collector tank. This also permits the cylindrical cleaning brush driven by the power take-off shaft and special drawbar construction to sweep in a full turn. The RK 120 Z can be easily emptied with lever rods. The rear half is tilted up and the funnel-shaped container empties by itself.

RK 120 Z

RK 120 Z in use

Cylindrical cleaning brush with four brush rails

Emptying by lever rods

· Front or rear extension· Rate of air flow about 200 m3/min.· Efficient all-around work thanks to 180° swivel radius· For tractors from 18 kW (25 HP)


Leaf blower for golf courses and sports fields as well as municipal surfaces.

Thanks to the whisper turbine, the WHISPER TWISTER is ideally suited as a leaf blower for public places. Because of the unique, patented continuously variable 180° swivel mechanism, the leaf blower can be swivelled with only one hydraulic cylinder or electric spindle. This continuously blows the leaves and other materials in the same direction without driving backwards.

Efficient all-around work from left to right is also possible without turning manoeuvres. The air nozzle is vertically adjustable so that the air stream can be appropriately adapted to the requirements. The large support wheel always ensures effective ground adaptation, also on uneven terrains.

WHISPER TWISTER

Right stop

Left stop

180° swivel mechanism

30 | 31

· Front or rear mounting· Rate of air flow about 390 m3/min.· Patented swivel mechanism with 230° radius· For tractors from 30 kW (40 HP)


Leaf blower for the efficient removal of leaves.

Despite its high blowing performance of about 390 m3 per minute, the noise emission of the MEGA TWISTER is at a welcome low level. Also in noise-sensitive surroundings such as golf links, hospitals or senior citizen facilities, the device can be used without any problem.

With the patented swivel mechanism, the leaf blower can be continuously swung through 230°. This allows efficient all-around work from left to the right without turning manoeuvres. The air nozzle is manually adjustable in a vertical direction, so that the air stream can adapt to the respec-tive conditions. The MEGA TWISTER can alternatively be furnished with a support roller or with a pneumatic chassis.

Optional equipment:Hydraulically adjustable air nozzle

MEGA TWISTER

MEGA TWISTER with steel roller

Left stop

Right stop

Chassis with two air filled wheels

The high art of artificial turf maintenance.

Regular maintenance of the long-term playing and load-carrying ability of infill artificial turf grounds is a fundamental prerequisite. Because right from the beginning, the artificial turf is subject to all the influences of the environment. Dust, blossom pollen, leaves, plant residues, dirt, pebbles, animal faeces and wear debris all soil the artifi-cial turf and lead to compactions if they are not regularly removed. The consequence is deficient water permeability. The pitch is subject to algae and moss and can no longer be played as desired. Water-impermeable slippery layers arise which significantly increase the danger of slipping. Simultaneously, the ball bouncing characteristics are lost, which immensely impairs the game operations. Contaminants such as paper, cigarettes, pieces of broken glass, plastic parts,

safety pins, bottle lids etc. are not only unsightly, but also present a high physical hazard.

Wiedenmann has developed a series of special artificial turf maintenance machines for the rapid and secure execution of all necessary care mea s -

ures. The grounds are brushed for cleaning, the fibres are loosened and refilled. Subsequently, the artificial turf is once again almost as

good as new regarding its sports functionality.

Artificial turf maintenance

32 | 33

· Working speed up to 12 km/h· Working width about 160 and 210 cm· Mounting in the rear 3-point (Cat. I and 0) or carriage drawn


For loosening sand, rubber granulate, and other infill materials.

The TERRA RAKE is distinguished by its stable construction and long service life.The high driving speed puts the parallelogram-suspended loosening tines in strong vibration, which loosen the infill material.

The special spring steel tines are arranged in five rows. Despite the fine row spacing of 16 mm, there is sufficient free space for obstruction-free work. The spring relief of the tine rows with the Relief Kit allows sensitive, individual settings and reduces the tine depth of penetration.

TERRA RAKE

TERRA RAKE

Relief Kit

Five-row tine arrangement

sports surface testing, research and analysis

· Working width about 185 cm· Chassis with electrical or hydraulic lifting· 3-point mounting frame or drawbar mountable in the opposite direction (allows uniform, cost-saving wear of the brushes)


The TERRA BRUSH allows rapid brushing and uniform distribution of sand and rubber granulate. It can addi-tionally be equipped with spring tines in order to loosen and level in one crossing.

Optional equipment:Spring tines, magnet strip, mounting for tractor rear 3-point or for carriage and drawbar, hydraulic or electrical lifting


The TERRA GROOM brushes in granulate and uprights turf fibres. The device separates fibres with the infill material, improves the ball playing characteristics, absorbs the energy impact and reduces the risk of injury.

Optional equipment:Granulate-loosening brush set, magnet strip for collecting metal objects, ball hitch attachment, mounting for tractor rear 3-point or for carriage and drawbar


TERRA BRUSH / TERRA GROOM

Three special brush rows

Chassis with hydraulic lifting

Magnet strip for collecting metal objects

Granulate-loosening brush

With spring tines

· Working width about 187 cm· Chassis with electrical lifting· 3-point mounting frame and drawbar are always mounted in the opposite direction for more uniform brush wear


34 | 35

· Working width about 120 cm· Tank volume 50 l· For light tractors and utility vehicles from 16 HP


For surface cleaning of coarse dirt in infilled artificial turf surfaces.

The TERRA CLEAN 100 takes up dirt by means of a cylindrical cleaning brush made of four brush rails. These transport the dirt and in part the surface infill material onto the riddle screen. The dirt from the reusable infill material is separated and collected with the sieving procedure. The infill material is once again directly supplied to the artificial turf pile after the sieving procedure.

The two-sided wheel drives work independent of each other to ensure uniform, intensive cleaning and sieving performance, also in the corners. The cleaning machine also has a central working height adjustment including transport position, where the sieve can be automatically switched off and the cylindrical cleaning brush drive activated.

TERRA CLEAN 100

Riddle screen

Two-sided, independent wheel drives

sports surface testing, research and analysis

· Working width about 120 cm· Tank volume 2 x about 50 l· Working speed 3 – 6 km/h


For the rapid and efficient collection of surface dirt.

The TERRA CLEAN 120 picks up dirt with the special sweeping brush driven by the power take-off shaft (for the TERRA CLEAN 120 M, by means of motor), which casts the dirt and some of the surface infill material onto a large riddle screen (∅ 6 mm).

The sieving procedure separates the dirt from the reusable infill material and collects it separately. Immediately after the sieving procedure, the infill material is reintroduced into the artificial turf pile. The standard, swivel suspended follow-up brush once again distributes the applied infill material and evens out all wheel tracks.

Optional equipment:Mesh filter insert (∅ 8 mm or ∅ 5 mm), closed dirt collection set (without sieving function), lighting equipment, propulsion with power take-off shaft (TERRA CLEAN 120, attachment on the rear 3-point Cat. I) or with internal combustion engine (TERRA CLEAN 120 M, attachment in the draw bar)

TERRA CLEAN 120

Transport position

Simple emptying of the dirt container

TERRA CLEAN 120 M

36 | 37

TERRA CLEAN 160

· Working width about 160 cm· Tank volume 2 x about 50 l· Working speed 3 – 6 km/h· Multiple-riddle screen of two interchangeable sieving levels


For intensive cleaning and dust separation of infilled artificial turf surfaces.

The TERRA CLEAN 160 is a completely novel maintenance machine for the intensive cleaning of infilled artificial turf surfaces up to a work depth of 1.5 cm – also under dew moisture conditions. Apart from the reliable brush take-up, an extremely quiet drum ventilator produces an underpres-sure in order to vacuum the infill material along with the dirt into the machine.

Three integrated cyclone filter units subsequently clean the process air of fine dust components up to a particle size of 10 μm. In contrast to paper or textile filters, the cyclone filters have the advan-tage that they cannot clog. The cleaning performance remains constant.

Optional equipment:Alternatively with rear 3-point and power take-off shaft drive for the mounting on towing vehicles Cat. I or drawn with electrical lifting and internal combustion engine (TERRA CLEAN 160 M)

Multiple-riddle screen

TERRA CLEAN 160 M

Unique operation

principle thanks to the

cyclone filter unit!

Sweepers

Dirt and snow are our profession.

38 | 39

· For front mounting on two-axle vehicles up to about 26 kW (35 HP)· Middle propulsion· Hydraulically hinged· Machines width about 110, 130 and 150 cm

· For the front mounting on two-axle vehicles up to about 44 kW (60 HP)· Middle propulsion· Hydraulically hinged· Machines width 135, 155 and 175 cm

Combination sweeping machine.

The shuttle-mounted COMBI CLEAN 2350 is ideally suitable sweeping snow and dirt. Two power systems are avai l-able: mechanical propulsion via power take-off shaft, and hydraulic propulsion.

Optional equipment:Dirt container, lateral positioning, side brooms, splash protection, special cylindrical cleaning brush

Combination sweeping machine.

The COMBI CLEAN 2600 is a robust, shuttle-mounted sweeping machine for snow and dirt removal. The propulsion of the two-part plastic cylindrical cleaning brush is carried out with the power take-off shaft and 2-gear transmission or hydraulically.

Optional equipment:Dirt container, lateral positioning, side brushes (propulsion is hydraulic or with v-belt), splash protection



COMBI CLEAN 2350 / COMBI CLEAN 2600

Hydraulically tiltable dirt container

Robust 2-gear transmission

Sweeping near the edge with side brushes

Continuously-variable adjustable support wheels

Snow rake blades

Snow? Simply push it away with us!

40 | 41

· For front mounting on two-axle vehicles up to about 18 kW (25 HP)· Blade width about 125, 140, 160 and 180 cm

· For front mounting on two-axle vehicles up to about 41 kW (55 HP)· Blade width about 150, 160 and 170 cm

Hinged rake blades.

The shuttle attachment equalizes driving unevenness in the SNOW MASTER 3400. The hydraulic lateral adjustment allows you to clear off the snow to the left, to the right, or straight ahead without any difficulty. If you hit an obstacle, the rake blades automatically flip over and then return into working position by spring-loading.

Optional equipment:Plastic or steel scraping rib

Spring leaf clearing blades.

SNOW MASTER 3800 with continuously variable hydraulic lateral adjustment, level compensation and mechanical tilt adjustment of the angle of incidence. When hitting an obstacle, the spring leaf blades flip up individually. Subsequently they automatically return to the original working position.

Optional equipment:Plastic or steel scraping rib, height-adjustable glide shoe or support wheel assembly, warning flags, hydraulic start-up safeguard with overpressure valve, delimitation lamp assembly



SNOW MASTER 3400 / SNOW MASTER 3800

Hinged rake blades

Central pivoting point

The rake blades flip up when hitting an obstacle

Height-adjustable glide shoe assembly

Height-adjustable support wheel assembly

The spring leaf blades flip up when hitting an obstacle

SNOW MASTER 3850 / 3900

· For two-axle vehicles up to about 67 kW (90 HP)· Blade width about 150, 172, 192 and 212 cm


Horizontal two-piece municipal rake blades for professionals.

The product series 3850 and 3900 form a completely novel snow rake blade generation. All vibra-tions during work are absorbed by the DynaFlex removal blades by the integrated blade surface shock-absorbing spring. This protects the front lift and tractor from wear as well as its driver from disagreeable, unhealthy vibrations.

The DynaFlex removal blades are made of two pieces with a lower active blade half and an upper passive blade half. The permanent flat surface of the scraping rib achieves complete clearing even at high speeds or on uneven surfaces.

Optional equipment:Plastic or steel scraping rib, splash protection, height-adjustable sliding device assembly, set of warning flags, hydraulic start-up safeguard with overpressure valve and second hydraulic cylinder, delimitation lamp set

Two-piece DynaFlex rake blade

Active lower blade half

Shock-absorbing spring and sliding device assembly

The „skidder“

among the rake blades –

dynamic, flexible,

effective!

42 | 43

· For tractors up to about 60 kW (80 HP) and municipal vehicles· Blade width for straight-ahead position about 138, 150, 167, 186 and 200 cm


Combination spring leaf rake blades for professionals.

The rake blade VARIO 3350 is characterized by stable construction, maintenance-free sliding bushings in the swivelling axis, and excellent functionality. It demonstrates its strengths especially under difficult and tight deployment conditions such as on pavements and in parking lots.

The tilting position of the rake blade up to 30° permits the snow to be cleared to the left or right without any difficulty. Wedge or V-positions are also rapidly adjustable with the two supplied hydraulic cylinders. The tapered design allows unproblematic near-edge clearing. The VARIO 3350 comes equipped with four spring leaf blades (six with blade width 200 cm).

Optional equipment:Plastic or steel scraping ribs, glide shoes, support wheels (not for blade width 138 cm), two-fold control block extension from 1 x to 2 x double-acting, delimitation lamps set, set of warning flags

VARIO 3350

VARIO 3350 in use

Spring leaf blades with steel scraping rib

V-position, adjusting cylinder, support wheels

Gritting equipment

Say farewell to slipperiness!

44 | 45

· For rear attachment on two-axle vehicles from about 15 kW (20 HP)· Container capacity about 250 l (with container attachment about 450 l)· Scatter spread about 120 cm (without disc) or 100 – 600 cm (with disc)


Combination box and circular gritter.

The ICE MASTER is a symbiotic combination of box and circular gritter. It can scatter all free-flow-ing materials such as sand, gravel, salt, granulate etc. without a problem. Built on the modular construction principle, the innovative gritting equipment can act as a box spreader up to a high-grade all-rounder.

In the road grit container, a dosing shaft ensures uniform flow. The standard equipment includes a stopping system, filling safety sieve, and lighting. The box spreader can be optionally equipped with a stainless steel scattering disc. This way one can switch from scattering by box spreader (e.g. for pavements) to the circular gritter (e.g. for parking lots) while working.

Optional equipment:Stainless steel scattering disc with hydraulic or electrical propulsion, scattering disc hinged mechanically or hydraulically for asymmetrical scattering, container attachment and container cover, distance holder with steering rollers, electrical dosing unit with remote indication, attach-ment cupola triangle with height-adjustable recess rack, ICE CONTROL for road speed related spreading

ICE MASTER

Electronic adjusting spindle

Electronic dosing unit

ICE CONTROL

for road speed

related spreading.

Always there for you. Fast and competent.

No matter where you are – with our pronounced customer orientation and first-class consulting competence we are there for you at all times. Our qualified service team advises you comprehen-sively and individually on all questions concerning our equipment programme, as well as on the topics of turf regeneration and maintenance, dirt removal, and winter service.

And if you need support for your Wiedenmann machine, we will gladly either come to your personal assistance, or you can make use of the online documentation system on our website. Here you will find the parts lists and perspective drawings of all our machines. To access this information, just enter the type designation. You or your grounds man are then in the position to carry out practically all service and repair work on your own initiative, cost-effectively and without delay. But this will probably not occur all too frequently: our low rate of necessary warranty work confirms that the need for warranty service at Wiedenmann is extremely rare.

At a glance:· Personal, intensive, on-site consultation· Direct contact with experienced specialists· Support by telephone or e-mail· Fast, competent help in the event of malfunctions· Online-service for repair work on your own initiative

Service

46 | 47

Wearing parts

Quality as on the first day. Also after years.

Original spare parts and wearing parts from Wiedenmann increase the service life of your machines and, over the course of years, secure their performance capability, smoothly-running function and safe operation. We offer you high-quality parts at fair conditions.

Our sales partners can order spare parts simply and conveniently from our Webshop, thus optimally shortening the delivery time. The procedure ensures the high readiness of all Wiedenmann machines. You can order all spare parts and wearing parts for all of our machines. The current availability can be queried with the storage status at any time.

At a glance:· Original spare parts stand for high-value stability· High-quality materials and top workmanship guarantee long service life· Permanent further development of function and material quality· Rapid availability from stock· Ordering possibilities via Webshop

Wiedenmann GmbHAm Bahnhof | 89192 Rammingen | GERMANY Tel. +49 7345 953-0 | Fax +49 7345 [email protected]

Wiedenmann North America LLC25 A Telfair Place | Savannah, GA 31415Phone 912 790 300-4 | Fax 912 790 300-5www.terraspike.com

Wiedenmann KftRákóczi u. 228 | 9343 BeledTelefon +36 96 59412-0 | Telefax +36 96 59412-802

/13

ww

w.m

k-ul

m.d

e

www.wiedenmann.com

Winter service ArtiÞcial t Natural turf ArtiÞcial - NH-Koneet · ArtiÞcial ArtiÞcial t Dirt...

Documents

Transcript of Winter service ArtiÞcial t Natural turf ArtiÞcial - NH-Koneet · ArtiÞcial ArtiÞcial t Dirt...