Wind and weather proof. - Mennekes
Transcript of Wind and weather proof. - Mennekes
�
Stainless steel distributors.Wind and weather proof.
Service stations for outdoor and indoor use, to suit any requirement.
�
Tailored safety.
Stainless steel surface mounted distributors – not half bad.
Stainless steel surface
mounted receptacle
combinations
A pleasing appearance is
coupled with exacting design
details. Wherever reliable
protection from unauthorised
access to receptacles together
with an appealing design is
needed, no matter whether
the consumer is plugged
in or not, MENNEKES stainless
steel surface mounted
combinations are the products
to choose.
Stainless steel
V�A (material �.430�),
Flat finished surface (K�40).
Attractive.Robust.High IP grade.
The ideal energy distribution station for:
Industry Workshops Assembly halls Loading ramps Work yards Parks Public places Schools Food industry Production halls
in fact anywhere in modern architecture.
3
For any application.
Protection
IP 44 with closed door.
Lockabel doors
Doors fitted with half
cylinder lock. May be
integrated into existing
locking systems.
Column made from flat
finished stainless steel
available for enclosure sizes
530 x 400 x ��0 mm and
700 x 530 x 350 mm.
Detachable back panel for
convenient installation.
Weather shield made from
flat finished stainless steel
available for all
three enclosure sizes.
4
Power and water.
Stainless steel flush mounted distributors – fitting any architectural design.
Stainless steel flush
mounted receptacle
combinations
MENNEKES stainless steel
distributors suit both modern
and classical architecture.
IP 43 to IP 44 with closed
door.
Made from V�A stainless
(material �.430�) or
V4A (material �.404), flat
finished (K�40).
Clean.Safe.Timelessly elegant.
The ideal energy and water supply distributor for:
Theatres Cinemas Sports stadiums
and arenas Department stores Shopping centres Administrative
buildings Service stations Office buildings
and wherever functional yet appealing concepts are needed.
5
Integrated energy.
Convenient installation
Empty flush mounted
enclosure with five or six
cable entries. Clean
mounting on the wall using
adjustable trim frames.
Lockable doors
Doors fitted with half
cylinder lock. May be
integrated into existing
locking systems.
Cable guard
The distributors may be
locked even when in use.
The cable guard aperture is
sufficiently dimensioned
for leading through cables.
Water connection
As an option, a frost-proof
tap is available for the
flush mounted enclosure,
part no. �843�.
�
Made of steel. High
Energy posts – the right solution for just about every application.
An energy supply and a means of roping off – all in one.
The rugged energy station for:
Markets and fairgrounds
Parks and greens Harbours Sports stadiums
and arenas Theme parks Public places Schoolyards
and wherever rugged and secure energy distribution is important.
MENNEKES energy posts
Safe arrangement for energy
supply and at the same time
a means of roping off.
Available in various sizes.
Appliances in protection
classes IP 44 or IP �7.
Special colours according
to the RAL colour chart upon
request.
7
energy. Vandal proof.
Lockable doors
The doors are lockable using
a half cylinder lock.
Energy can be drawn with
the door open or closed
(for safety reasons).
Stable installation
The posts are complete with
a frame with four sufficiently
large apertures to enable
it to be fixed on existing or
new foundations.
On request, other locks
are also available
(e.g., triangular lock).
If the ground underneath is
properly prepared, the posts
are virtually rock-solid.
Available in 3 sizes
�050 x ��0 mm,
�050 x �73 mm and
�400 x 3�5 mm.
8
Power. Compressed
CombiTOWER® – short routes to your energy source.
� sizes.� colours.A full range of possibilities.
With CombiTOWER® all the
required energy connections
are available right at the
workplace. This saves time
as appliances and machines
are swiftly put into their
operating condition and
installation times are
reduced. There is no need for
long supply cables – safe
receptacles are located right
next to the workplace.
The ideal energy station for:
Industry Workshops Assembly halls Loading ramps Work yards Food industry Production halls
and wherever a secure energy supply is required despite harsh conditions.
�
air. Water.
Individually designed
equipment
to suit your particular
requirements is possible.
Up to two compressed air or
water connections can be
installed in a CombiTOWER®.
It is suitable for combinations
with receptacles ranging
from ��A to �3A or
for single receptacles from
��A to ��5A.
In the standard version
MENNEKES CombiTOWER®
is available in � sizes
(�043 x �54 x �4� mm or
�005 x �80 x �00 mm), either
with a signal yellow or a
bright stainless steel finish.
Indoor and outdoor.
Furthermore, special RAL
colours and designs with a
hinged, lockable front cover
are availabe on request.
�0
Energy exactly where
Stainless steel weather shields.
Simple.Swiftly installed.Individually designed.
Outdoor electrical appliances
are exposed to various
adverse weather conditions
and UV radiation.
The use of different electrical
appliances calls for different
receptacles, which are
available in the form of handy
complete combinations.
Stainless steel weather
shields for walls or on
columns
A secure energy supply
in virtually any place of
application.
��
it’s needed.
Individual choice
The modular weather shield
and column system enables
individual selection of
wall mounted or standing
installations.
Equipment
Select from our large
range of receptacle
combinations or from our
single receptacles.
Material
From V�A stainless steel
(material �.430�),
surface finish:
bright stainless steel.
Weather shields
For installation on a column
or for wall mounting with
customised fixing possi-
bilities (see pages �8/��).
��
MENNEKES surface mounted receptacle combinations in stainless steel, for wall mounting or on columnsV�A stainless steel enclosure (material �.430�), surface with a flat finish (K�40), protection class IP 44 with a closed door.
� CEE receptacle 3�A, 5p, 400V� MCB 3�A, 3p, C,� CEE receptacle ��A, 5p, 400V� MCB ��A, 3p, C,� SCHUKO® receptacles ��A, �30V� MCB‘s ��A, �p, B� RCD �3A, 4p, I∆N
= 0.03APart no. 83744(illustration on the left)
Surface mounted receptacle combinations from flat finished stainless steelDim. (H x W x D): 530 x 400 x ��0 mm,standard door stop on the right, front door with swing handle and half cylinder lock – lockable even when plugs are connected.Cable entry / connection options:� M 3� entry nipples at bottom,� M �� brass screw plugs at bottom,terminal (shock hazard protected to BGV A�) for cables up to 5 x �5 mm�.
Surface mounted receptacle combinations from flat finished stainless steelDim. (H x W x D): 700 x 530 x 350 mm,standard door stop on the right, front door with swing handle and half cylinder lock – lockable even when plugs are connected.� cable entry bushes at bottom, suitable for cable diameters from �3 to 4� mm� M �� brass screw plugs at bottom,� M �0 brass screw plug at bottom,terminal (shock hazard protected to BGV A�) for � cables up to 5 x 50 mm�.
� CEE receptacle ��5A, 5p, 400V� safety glass circuit breaker NH00/3p with safety fuses ��5A� CEE receptacle �3A, 5p, 400V� MCB �3A, 3p, C� CEE receptacle 3�A, 5p, 400V� MCB 3�A, 3p, C� CEE receptacle ��A, 5p, 400V� MCB ��A, 3p, C3 SCHUKO® receptacles ��A, �30V3 MCB‘s ��A, �p, BBack-up fuses:� Neozed D 0�, 3p (E �8) with two safety fuses �3A� RCD‘s �3A, 4p, I∆N
= 0.03APart no. 83704
Surface mounted receptacle combinations from flat finished stainless steelDim. (H x W x D): 700 x 300 x 3�0 mm,standard door stop on the right, front door with swing handle and half cylinder lock – lockable even when plugs are connected.� cable entry bushes at bottom, suitable for cable diameters from �3 to 4� mm� M �0 brass screw plug at bottom,terminal (shock hazard protected to BGV A�) for � cables up to 5 x �5 mm�.
� CEE receptacle �3A, 5p, 400V� CEE receptacle 3�A, 5p, 400V� MCB 3�A, 3p, C� CEE receptacle ��A, 5p, 400V� MCB ��A, 3p, C4 SCHUKO® receptacles ��A, �30V� MCB‘s ��A, �p, B� RCD �3A, 4p, I∆N
= 0.03APart no. 83698
Each surface mounted stainless steel receptacle combination comes with � set (4 pcs.) of fixing straps in a bag.
�3
� CEE receptacle ��A, 5p, 400V� MCB ��A, 3p, C4 SCHUKO® receptacles ��A, �30V4 MCB‘s ��A, �p, B� RCD 40A, 4p, I∆N
= 0.03APart no. 83725(illustration on the left)
� CEE receptacle �3A, 5p, 400V� MCB �3A, 3p, C� CEE receptacles 3�A, 5p, 400V� MCB‘s 3�A, 3p, C� CEE receptacles ��A, 5p, 400V� MCB‘s ��A, 3p, C3 SCHUKO® receptacles ��A, �30V3 MCB‘s ��A, �p, BBack-up fuses:� Neozed D 0�, 3p (E �8) with two safety fuses �3A� RCD‘s �3A, 4p, I∆N
= 0.03APart no. 83705
� CEE receptacle �3A, 5p, 400V� MCB �3A, 3p, C� CEE receptacle 3�A, 5p, 400V� MCB 3�A, 3p, C� CEE receptacle ��A, 5p, 400V� MCB ��A, 3p, C4 SCHUKO® receptacles ��A, �30V4 MCB‘s ��A, �p, BBack-up fuses:� Neozed D 0�, 3p (E �8) with two safety fuses �3A� RCD‘s �3A, 4p, I∆N
= 0.03APart no. 83706
Accessories
Empty surface mounted enclosure from flat finished stainless steel
Dimensions: 700 x 300 x 3�0 mmPart no. 18433
Galvanised basePart no. 18442
Weather shieldFlat finished stainless steelPart no. 18438
Weather shield from flat finished stainless steel,available for the three sizes of enclosure shown on this page.
ColumnFlat finished stainless steel• detachable back panel for easy assembly• � C-profile rail on the inside for cord grip clampsCord grip clamps not included in the scope of supply.(Columns available only for the enclosure sizes530 x 400 x ��0 mm and700 x 530 x 350 mm)
Accessories
Empty surface mounted enclosure from flat finished stainless steelDimensions: 530 x 400 x ��0 mmPart no. 18422
ColumnFlat finished stainless steelDimensions (H x W): �00 x 400 mmPart no. 18424
Galvanised basePart no. 18416
Weather shieldFlat finished stainless steelPart no. 15586
Accessories
Empty surface mounted enclosure from flat finished stainless steelDimensions: 700 x 530 x 350 mmPart no. 18423
ColumnFlat finished stainless steelDimensions (H x W): 830 x 330 mmPart no. 18426
Galvanised basePart no. 15577
Weather shieldFlat finished stainless steelPart no. 15575
�4
MENNEKES stainless steel flush mounted receptacle combinationsFront V�A stainless steel (material �.430�), flat finished (K�40),protection class IP 43 with closed door.Flush mounted combinationsmade up of:
Front door and trim frame Flat finished stainless steelDimensions (H x W): 580 x 4�0 mmfront door, lockable with half cylinder lock, lockable even when plugs are connected, door stop on the right
Flush mounted stainless steel enclosureDim. (H x W x D): 5�0 x 3�0 x �00 mmcable entry bush3 x at top, � x at bottom,suitable for cable diameters from �3 to 4� mm
� CEE receptacle ��A, 5p, 400V� MCB ��A, 3p, C4 SCHUKO® receptacles ��A, �30V4 MCB‘s ��A, �p, B� RCD 40A, 4p, I∆N
= 0.03A for two cables of up to 5 x �5 mm�
Part no. 84373
Empty enclosure
Empty flush mounted enclosure stainless steelDim. (H x W x D): 5�0 x 3�0 x �00 mm
with front door and trim frame from flat finished stainless steelDimensions (H x W): 580 x 4�0 mmPart no. 18427
Galvanised basePart no. 18416
� CEE receptacle 3�A, 5p, 400V� MCB 3�A, 3p, C� CEE receptacle ��A, 5p, 400V� MCB ��A, 3p, C� SCHUKO® receptacles ��A, �30V� MCB‘s ��A, �p, B� RCD �3A, 4p, I∆N
= 0.03A for two cables of up to 5 x �5 mm�
Part no. 84374
�5
MENNEKES stainless steel flush mounted receptacle combinations for power cables and water hosesTrim frame and flush mounted enclosure V4A stainless steel (material �.4404),flat finished (K�40), protection class IP 44 with closed door.Flush mounted combination for power cables and water hosesmade up of:
Front door and trim frame Flat finished stainless steelDimensions (H x W): 53� x 308 mmfront door, lockable with half cylinder, lockable even when plugs or hoses are connected, door stop on the right
Flush mounted stainless steel enclosure, flat finishedDim. (H x W x D): 485 x ��5 x �30 mmcable entry bush � x at top, suitable for cable diameters up to �5 mm (� cable entries at top left and top right each to be cut out),� pivoting mounting angle, pre-drilled to accommodate optionally:� double Cepex receptacle product group �0�7 (CEE ��A or SCHUKO®),� single wall mounted Cepex receptacles (CEE receptacle ��A or SCHUKO®)� combination enclosure 70 x ��8 mmAccommodation for �/2“ frost-proof outdoor fitting (ref. no. �8440)Part no. 18432
Frost-proof outdoor fittingwith automatic emptying system, angled gland for �/2“ hoses, rated pressure: PN ��,flexible ND �5 connection with gland, all metal parts which come into contact with liquids are made from red brass, with black plastic handle, outlet with connected collar and EPDM seal with DIN/DVGW sound insulation approval, including pipe air-release valve and check valve as safety devices to DIN EN �7�7 and DIN ��88 (part 4), preassembled water fittings.� hexagon head screws M � x �0 to fasten the water fitting are enclosed as detached parts.Part no. 18440
Important note:According to VDE regulations, the above stainless steel combination for power cables and water hoses must be protected by an RCD (0.03A)
Receptacle mounting plate and splash guardThe pivoting mounting angle and the splash guard from part of the scope of supply.
Receptacle combinationwired ready for connection,4 SCHUKO® receptacles ��A, �30VPart no. 98365
Cepex double receptacle� CEE receptacles ��A, 5p, 400VPart no. 4204
Cepex double receptacle� CEE receptacle ��A, 5p, 400V� SCHUKO® receptacle ��A, �30VPart no. 4202
Variations of stainless steel flush mounted combinations for power cables and water hoses.
��
MENNEKES power postsInstalled equipment to protection class IP 44 or IP �7.
Power postfrom steel tube, wall thickness 4.0 mm,hot-dip galvanised, powder-coated,colour: red,hinged supply aperture with safety lock,dimensions (H x Ø): �050 x ��0 mm (inside)weight: approx. 45 kg
Bottom cable outlet: (H x W) 50 x 40 mm Flange for ground installation: Ø 3�0 mm with 4 fixing holes �5 mm, for fastening on an existing foundation.
Equipment:� CEE receptacle ��A, 5p, 400V� MCB ��A, 3p, C� SCHUKO® receptacles ��A, �30V� MCB �p, B
Cable entry: � x M �5 at top open, for � cable up to 5 x � mm�
Part no. 84335
Empty enclosure 18500 RO
Assembly plate 15561
Power postfrom steel tube, wall thickness 4.5 mm,electroplated, yellow chromated and powder-coated, colour: anthracite (RAL 70��), hinged supply aperture with half cylinder lock, dimensions (H x Ø): �050 x �73 mm weight: approx. �0 kg
Bottom cable outlet: (H x W) �0 x 70 mm Flange for ground installation: Ø 3�0 mm with 4 fixing holes �5.5 mm, for fastening on an existing foundation.
Equipment: � CEE receptacle 3�A, 5p, 400V � MCB 3�A, 3p, C � CEE receptacle ��A, 5p, 400V � MCB ��A, 3p, C � SCHUKO® receptacles ��A, �30V � MCB‘s ��A, �p, B � RCD 40A, 4p, I∆N
= 0.03A for all receptacles
Cable entry at top: � x M 3� open, � x M 3� with plug, for � cable up to 5 x �0 mm�
Part no. 83685
Empty enclosure 18503 AG
Assembly plate 15617
Power postfrom steel tube, wall thickness 4.5 mm,hot-dip galvanised, wet painted,colour: anthracite iron glitter DB703,hinged supply aperture with safety lock,dimensions (H x Ø): �400 x 3�5 mm (inside)weight: approx. �00 kg
Bottom cable outlet: (H x W) 50 x �00 mm Flange for ground installation: Ø 450 mm with 4 fixing holes �5 mm, for fastening on an existing foundation.
Equipment:� CEE receptacle �3A, 5p, 400V� CEE receptacle 3�A, 5p, 400V� MCB 3�A, 3p, C� CEE receptacle ��A, 5p, 400V� MCB ��A, 3p, C� SCHUKO® receptacles ��A, �30V� MCB‘s ��A, �p, B� RCD �3A, 4p, I∆N
= 0.03Afor all receptacles
Cable entry:� glands M 40 at bottom� glands M 40 at topfor two cables up to 5 x �5 mm�
Part no. 83722
Empty enclosure 18502 AZ
Assembly plate 15566
�7
MENNEKES CombiTOWER®
Made from V�A stainless steel (material �.430�), suitable for indoor and outdoor installation
CombiTOWER®
Stainless steelwith removable cover,paintec signal yellow (RAL �003),dimensions (H x W x D):�043 x �54 x �4� mm
Part no. 15679
CombiTOWER®
Stainless steelwith removable cover,bright finish,dimensions (H x W x D):�043 x �54 x �4� mm
Part no. 15678
CombiTOWER®
Stainless steelwith assembly plate and front plate,painted signal yellow (RAL �003),dimensions (H x W x D):�005 x �80 x �00 mmPart no. 15524
CombiTOWER®
Stainless steelwith assembly plate and front plate,bright finish,dimensions (H x W x D):�005 x �80 x �00 mmPart no. 15525
For CombiTOWER®
15678, 15679, 15680, 15681:
AMAXX® combination enclosuresize 260 x 225 mmsize 390 x 225 mmsize 520 x 225 mm
Please see AMAXX® or MENNEKES leaflet or refer to the MENNEKES main catalogue.
For CombiTOWER®
15524 and 15525
XXL combination enclosuresize 520 x 260 mm
Please contact us.
CombiTOWER®
15524, 15525:
• with fixing holes and M �5 thread in the mounting plate, including screws and washers• with M �0 blind plug for compressed air port• with M 8 earthing bolt
• Possibility of fixing AMAXX® combinations at the back; at top: � M � threaded bolts and nuts (to fit the combination) at bottom: � M � threaded holes and bolts• with M �0 blind plug for compressed air port• with M 8 earthing bolt
CombiTOWER®
Stainless steelwith removable cover and lockable door,painted signal yellow (RAL �003),dimensions (H x W x D):�043 x �54 x 4�5 mm
Part no. 15681
CombiTOWER®
Stainless steelwith removable cover and lockable door,bright finish,dimensions (H x W x D):�043 x �54 x 4�5 mm
Part no. 15680
Convenient handling.
Enclosure size�043 x �54 x �4� mm:Simple installation thanks to the removable cover.
The upper parts of the AMAXX® enclosure, which are hinged on the side, can be easily opened.
�8
MENNEKES stainless steel weather shieldsfor wall mounting, on column or pole V�A stainless steel (material �.430�)
Attention!When mounting on a pole, please order separately:
Stainless steel mounting clips(� pcs. in a set)
Ø 70–�0 mmSet: part no. 22986
Ø �0–��0 mmSet: part no. 22987
Ø ��0–�30 mmSet: part no. 22988
Weather shield made from stainless steel with side wallsfor wall mounting or on a column
Dimensions (H x W x D):��� x �5� x �3�/5� mmsurface: bright finishPart no. 15542
Weather shield made from stainless steel with side wallsfor wall mounting or on a column
Dimensions (H x W x D):��8 x �54 x �80 mmsurface: bright finishPart no. 15683
Dimensions (H x W x D):4�8 x �54 x �50 mmsurface: bright finishPart no. 15682
Shield 15683Suitable to accommodate:
AMAXX® combinationsenclosure size5�0 x ��5 mm(see main catalogue, chapter 7,or AMAXX® leaflet)
Shield 15682Suitable to accommodate:
AMAXX® combinationsenclosure sizes��0 x ��5 mm and 3�0 x ��5 mm(see main catalogue, chapter 7,or AMAXX® leaflet)
Weather shield made from stainless steel with side wallsfor wall mounting or on a column
Dimensions (H x W x D):�00 x 380 x �40/��0 mmsurface: bright finishPart no. 15531
Shield 15531Suitable to accommodate:
Combinationsenclosure size5�0 x ��0 mm(Please contact us.)
EverGUM® combinationsenclosure sizes380 x �30 mmand 380 x 3�0 mm(see main catalogue, chapter 8)
��
Stainless steel weather shield 15542with side walls, not only suitable for accommodating receptacles. In the illustration on the left, you will find an example of what is possible.
Accessories:
Columnfrom stainless steel(material 1.4301)
Surface: stainless steel, bright finish (basic column for the three shields shown on the left),height approx. �300 mmPart no. 15530
More product information can be found on the internet at: www.MENNEKES.de
MENNEKESElektrotechnik GmbH & Co. KGIndustrial plugs and socketsAloys-Mennekes-Straße �D-573�� Kirchhundem
Please send the following leaflets free of charge:
Tel. +4� (0) �7 �3 / 4�-�Fax +4� (0) �7 �3 / 4�-� �4E-Mail [email protected] www.MENNEKES.de
AMAXX®
A new approach to receptacle combinations.
Fax response please return to +49 (0) 27 23 / 41-2 14
Screwless connections.For CEE plugs, connectors and recpetacles.
Please tick
Industrial Ethernet – electrical power and data.For advanced industrial net-works: Cepex data sockets. Fibre optics technology. CEEplus.
Please tick
MENNEKES catalogue.
EX zone 22.CEE plugs and receptacles.Dust proof. Tested. Plugs and receptacles up to 63A.
Please tick
Distributors. For ceiling, wall and floor.For energy, data, compressed air and light.
Please tick
RAPIDOInstalled in no time at all.Panel-mounted receptacles and inlets with central thread. Installation with no need for tools.
Please tick
Company
Division / function
Mr. / Mrs.
Street, no.
Post code / town
Phone
Fax
Industry: Electrical wholesaler Electrician Industrial company Planner / engineering company _______________
Number of staff: �-�0 ��-50 5�-�00 �0�-500 50�-�000 more than �000
For leaflets in other languages, please contact us on phone no. +4� (0) �7 �3 / 4�-�.
3�80
00D
S05T
A04
.0�V
Please tick Please tick