WINCH INFORMATION TO DIN 15020 PART 1 - Prolift Lifting … · winch information winch drive...
Transcript of WINCH INFORMATION TO DIN 15020 PART 1 - Prolift Lifting … · winch information winch drive...
28
WINCH INFORMATION
WINCH DRIVE GROUP/DUTY CLASSTO DIN 15020 PART 1
CALCULATING FLEET ANGLEMinimum distance from drum to first sheave or load connection - metres
SLOPE & GRADE RESISTANCE
Minimum distance from drum to first sheave or load connection - metres
If the duration of an operating cycle is 12 minutes or longer, the rope may be graded one drive group lower than the drive group grading determined from the running time category and from the load collective.
18
15
12
9
6
3
0 129 254 380 508 635 767
Smooth drum1.5 degrees
Grooved drum3 degrees
SLOPE
(Percent per 100 Horizontal m)
GRADE RESISTANCE
(kg pull per ton to overcome
grade resistance)
1 9
2 18
3 27
4 36
5 45
6 54
7 63
8 73
9 82
10 90
11 99
12 108
13 117
14 126
15 134
16 143
17 151
18 160
19 169
20 178
25 220
30 260
35 299
40 337
45 372
50 406
55 437
60 464
65 492
70 519
75 543
80 565
85 587
90 607
95 624
100 638
RUNNING TIME CATEGORY
LIGHT MEDIUM HEAVY
(running time per day in hours, related to
one year)
Max load occurs only infrequently.
Low, average. max load occurs
with roughly equal frequency.
Max load occurs almost continuously.
V006 up to 0.125 1Em 1Em 1Dm
V012 over 0.125 - up to 0.25
1Em 1Dm 1Cm
V025 over 0.25 - up to 0.5
1Dm 1Cm 1Bm
V05 over 0.5 - up to 1 1Cm 1Bm 1Am
V1 over 1 - up to 2 1Bm 1Am 2m
V2 over 2 - up to 4 1Am 2m 3m
V3 over 4 - up to 8 2m 3m 4m
V4 over 8 - up to 15 3m 4m 5m
V5 over 15 4m 5m 5m
29
HAND WINCH TYPE HA-AG
Lifting capacity 45 kg or 100 kg for wall mounting
• Hand operated winches designed for light duty application raising blinds, shutters, clothes lines and chandeliers
• Not recommended for industrial application
• Aluminium die-cast construction, corrosion resistant parts and powder coated paint finish
• Self locking brake
• Quiet running with low crank effort, removable crank and low weight
Product code HA-AG45 HA-AG100
Lifting capacity 1st layer (kg) 45 100
Rope diameter (mm) 2 3
Rope capacity total (m) 12 8
Ratio 1:1 3:1
Lift per crank turn (mm) 96 38
Required effort (kg) 8 6
Weight (kg) 1 2.1
45 kg 100 kg
30
HAND WINCH TYPE HA-SW
Product code HA-SW80 HA-SW125
Lifting capacity 1st layer (kg) 80 125
Lifting capacity last layer (kg) 47 60
Rope diameter (mm) 3 4
Rope capacity 1st layer (m) 2.1 1.5
Rope capacity total (m) 20 15
Number of layers 6 6
Ratio 1:1 1:1
Drum width (mm) 60 83
Lift per crank turn (mm) 135 135
Required effort (kg) 14 14
Duty class to DIN 15020 1Em 1Em
Weight (kg) 2.5 2.5
Capacity (kg) 80 125
A 142 142
B 150 250
C 105 144
D 85 126
Eø 40 40
F 100 100
G 150 150
H 180 180
J 70 70
Kø 9 9
125 kg Stainless Steel Winch is also available
Lifting capacity 80 kg - 125 kg for wall mounting
• Wall mounted spur gear winch with fixed crank
• Compact unobtrusive hand winches
• Pressed steel with zinc plating, corrossion resistant
• Easy, safe operation
• Rope outlet in any direction
• With automatic Siku type brake - self sustaining
• Stainless Steel version available - 125 kg
DIMENSIONS (mm)
31
HAND WINCH TYPE HD-SG
63 or 125 kg
Lifting capacity 63 - 250 kg for wall mounting
• Wall mounted spur gear winch with removable crank
• Solid aluminium housing
• Silent, enclosed load pressure brake with automatic adjustment
• Winch handle removable under load
• Rope outlet in any direction
• Complies with BS EN 13157
Product code HD-SG63 HD-SG125 HD-SG250
Lifting capacity 1st layer (kg) 63 125 250
Lifting capacity last layer (kg) 63 125 140
Rope diameter (mm) 3 3 4
Rope capacity 1st layer (m) 2 2 1.4
Rope capacity total (m) 20 20 15
Number of layers 6 6 6
Ratio 1:1 1:1 2.75:1
Lift per crank turn (mm) 135 135 57
Required effort (kg) 10 12 16
Weight (kg) 3 3 5
DIMENSIONS (mm)
Capacity (kg) 63 125 250
A 130 130 178
A1 110 110 134
B 243 270 270
B1 116 116 143
B2 90 90 90
B3 14 14 12
B4 51.5 51.5 81
C 130 130 247
C1 110 110 221
C2 55 55 53
C3 150 250 250
D 8.5 8.5 10.5
Drum Ø 40 40 46
Drum width 50 50 44
250 kg
32
HAND WINCH TYPE HA-SG
Product code HA-SG300 HA-SG500 HA-SG750 HA-SG1000 HA-SG2000 HA-SG3000
Lifting capacity 1st layer (kg) 300 500 750 1000 2000 3000
Lifting capacity last layer (kg) 203 330 580 750 1700 2500
Rope diameter (mm) 6 6.5 8 9 12 13
Rope capacity 1st layer (m) 2.7 2.1 3.7 3 3.6 2.9
Rope capacity total (m) 11 10 12 10 8 7
Number of layers 4 4 4 4 2 2
Ratio 3.2:1 7.4:1 12.25:1 18.37:1 25.7:1 42.8:1
Lift per crank turn (mm) 74 30 28 19 16 10
Required effort N 190 210 200 180 320 300
Weight (kg) 10 10 14 15 23 32
A (mm) 209 209 263.2 263.2 271.5 348.5
B (mm) 170 170 250 250 180 220
C (mm) 200 200 290 290 220 260
D (mm) 270 270 250 250 280 380
E (mm) 300 300 290 290 330 442.5
F (mm) 96 96 125 125 250 255
G (mm) 130 130 130 130 250 250
H (mm) 70 70 102 102 120 120
I (mm) 250 250 250 250 300 300
J (mm) 63 63 90 90 126 126
K (mm) 89 89 145.7 145.7 161.5 223.5
L (mm) 270 270 299 299 550 550
Lifting capacity 300 kg to 3000 kg for wall mounting • Wall mounted spur gear winch
• Robust spur gear hand winches with a high degree of safety
• With automaic SIKU type brake, self sustaining with folding handle
• Maintenance free bearings, corrosion resistant
• Painted finish as standard, orange
• Zinc plated finish available on capacities 300kg, 500kg, 750kg and 1000kg
• Suitable for manual ground support truss systems
• Complies with BS EN 13157
DIMENSIONS (mm)
33
HAND WINCH TYPE HA-SGS
Lifting capacity 250 kg or 500 kg
• Wall mounted spur gear winch with removable crank handle
• Removable crank and handle fits either front or back faces - this avoids unintentional operation – useful in non secure areas like schools etc.
• Easily installed on flat surfaces - unobtrusive
• Internal automatic load brake, high security with a slack rope inhibiter
• Quiet in operation
• Painted finish as standard, orange
• Suitable for manual ground support truss systems
• Complies with BS EN 13157
Product code HA-SGS250 HA-SGS500
Lifting capacity 1st layer (kg) 250 500
Lifting capacity last layer (kg) 162 331
Rope diameter (mm) 5 6.5
Rope capacity 1st layer (m) 2.7 2.1
Rope capacity total (m) 15 10
Number of layers 6 6
Ratio 5.06:1 9.2:1
Lift per crank turn (mm) 47 25
Required effort daN 120 140
Duty class to DIN 15020 1Em 1Em
Weight (kg) 12 12
34
HAND WINCH TYPE HA-WV, HA-KV
Lifting capacity 300 kg or 500 kg
• Compact, modern, braked winch - for wall mounting (WV), base or wall mounting (KV)
• Innovative winch with large rope capacity
• Corrosion resistant zinc plated with fully enclosed gears and brake encased in plastic cover
• Self locking internal brake with proven security concept
• Lightweight and compact
• Folding Crank
• Quiet in operation
• Available in 2 versions – wall mounting (WV) or base mounting with mounting frame (KV)
• Stainless Steel version available see page 46Base or wall mounting (KV)
Wall mounting (WV)
Product code WV (wall mounting)
HA-WV300 HA-WV500
Product code KV (base orwall mounting)
HA-KV300 HA-KV500
Lifting capacity 1st layer (kg) 300 500
Lifting capacity last layer (kg) 185 300
Rope diameter (mm) 4 5
Rope capacity 1st layer (m) 3.4 2.6
Rope capacity total (m) 29 22
Number of layers 6 6
Ratio 3.1:1 4.5:1
Lift per crank turn (mm) 64 46
Required effort (kg) 16 20
Duty class to DIN 15020 1Em 1Em
Weight (kg) 5 5
Capacity (kg) 300 500
A 337 337
B 170 170
C 135 135
D 105 105
E1 200 200
F 83 83
F1 65 65
G 160 160
H 250 250
J 130 130
K 140 140
L 60 60
MØ 11 11
NØ 13 13
DIMENSIONS (mm)
35
Product code GO-4 AFDPS GO-6 AFDPS GO-8 AFDPS GO-12 AFDPS
Lifting capacity - 1st layer (kg) 340 500 650 800
Lifting capacity - last layer (kg) 120 200 250 300
Webbing size (mm) 50 50 50 50
Drum capacity (m) 4.6 6 8 8
HAND WINCH TYPE GO-AFD
Lifting capacity 190 kg - 1994 kg
• General purpose braked winch for base or column mounting
• Large rope capacity
• Corrosion resistant zinc plated with fully enclosed gears and brake encased in plastic cover
• Self locking internal brake with proven security concept
• Lightweight and compact
• Stamped gears with gear protection
• Folding crank
• Quiet in operation
• Stainless Steel version available see page 45
• supplied for webbing or wire rope
WIRE ROPE WINCHES
WEBBING WINCHES
Product code GO-4AFMD GO-4AFD GO-6AFD GO-8AFD GO-12AFD GO-20AFD GO-30AFD
Lifting capacity 1st layer (kg) 190 340 500 650 900 1180 1994
Lifting capacity last layer (kg) 80 190 240 270 490 650 1419
Rope diameter (mm) 3 4 5 6 7 8 9
Rope capacity 1st layer (m) 0.57 1.94 1.73 1.7 1.76 2.0 3.6
Rope capacity total (m) 8 12 14 19 13 10 13
Drum diameter (mm) 27 40 45 54 63 76 80
Number of rope layers 8 4 5 7 5 4 2
Gear ratio 2.57:1 2.57:1 3.5:1 4.85:1 9.71:1 9.71:1 21.85/1
Lift per crank turn (1st layer) (mm) 37 54 45 39 23 25 13
Required effort (kg) 15 24 24 23 25 19 24
Minimum load for brake function (kg) 10 10 10 10 10 10 50
Rolling load capacity on a 30% incline (kg) 350 500 750 850 1500 2500 3664
Weight (kg) 2.2 2.7 3.7 5.5 7.4 7.8 13.7
36
HAND WINCH TYPE GO-AFD
10x10 ø11 ø11
37
37
120
70 19
12
41
200.5
ø10.5
164 22HandleGO-12/20 AF/AFI
76.5 ø13 ø13
64
64
47
4730
171
20 210
270,5
8535
ø13Handle
GO-30 AF
Handle
R4,5
R4,5
31.5125
61 14.5
21.5
8.95
ø9
21.5
90.5R4,5
116
GO-4 AF/AFI
R4,5 Handle
ø9
16
156131.5
10.5 6
125
50
R4,5
GO-4 AFM
R5,5R6,25
37
11
11
178
39.5 25.5 14.5
ø11 32
32
100.5
GO-8 AF/AFI
Handle115
ø11
29
15540 26 14
ø11
32
32
67
10
10
GO-6 AF/AFI
Product code
GO-4AFM GO-4AF GO-4AFI GO-6AF GO-6AFI GO-8AF GO-8AFI GO-12AF GO-12AFI GO-12AFL GO-20AF GO-30AF
A 211 250 245 265 265 265 270 294 294 294 294 365
B 50 90.5 88.5 99 99 100 100 119.5 119.5 119.5 119.5 170
C 78 117 117 132 132 132 130 155 155 155 155 225
E 100 100 96 100 100 100 100 100 100 100 100 100
F 126 128 128 161 165 200 200 214 214 214 214 300
G 96 96 96 128 130 167 167 170 170 170 170 180
H 195 197 202 240 232 290 290 295 295 295 330 345
I 27 27 27 27 27 27 27 28 28 28 28 4
L - - - - - - - - - 40 - -
M 80 80 80 117 117 140 140 140 140 140 140 170
N 31 31 31 58 58 81 81 81 81 81 81 98
O 68 68 58 68 58 68 58 68 68 68 68 130
P 92 92 92 92 92 92 92 92 92 92 92 162
DIMENSIONS (mm)
Base Dimensions
37
HAND WINCH TYPE HA-KWV
Lifting capacity from 300kg to 1250kgModern base or column mounted winch ideal for heavy duty applications
• Column or base mounting
• Lightweight
• High efficiency through spur gearing
• Smooth running
• All components are zinc plated and corrosion resistant
• Automatic load pressure brake prevents unintentional lowering of the load
• Enclosed solid gears
• Complies with BS EN13157
• Also available as a stainless steel unit
Product code HA-KWV300 HA-KWV650 HA-KWV1250
Lifting capacity 1st layer (kg) 300 650 1250
Lifting capacity last layer (kg) 150 330 480
Wire rope diameter (mm) 4 6 8
Wire rope capacity 1st layer (m) 2.5 2.4 1.9
Wire rope capacity total (m) 22 23 28.5
Number of layers 6 7 9
Drum diameter (mm) 36 70 75
Lift per crank turn (mm) 126 39 16
Required effort (N) 270 240 240
Weight (kg) 4 9 16
1250 kg
650 kg
Stainless Steel Version
300 kg
38
HAND WINCH TYPE HA-KWV
DIMENSIONS (mm)
39
HAND WINCH TYPE F-QW
Lifting capacity 100 kg – 1700 kg
• General purpose column or base mounted winch, large drum capacity
• A range of spur gear winches suitable for lifting, lowering and pulling applications
• Safe and reliable double tipped brake pawl
• Especially suited for vehicle winch or trailer applications
• The QW winch will freewheel when unloaded; this feature can be removed if required
• Painted finish
Product code F-QW100 F-QW250 F-QW400 F-QW750 F-QW1100 F-QW1700
Lifting capacity 1st layer (kg) 100 250 400 750 1100 1700
Lifting capacity last layer (kg) 51 141 245 452 733 1291
Rope diameter (mm) 4 5 6 8 10 12
Rope capacity 1st layer (m) 4 5 5 5 6 7
Rope capacity total (m) 40 40 30 30 30 20
Number of layers 7 6 5 5 4 3
Ratio 1:1 2.88:1 4.33:1 12.2:1 22.2:1 28.8:1
Lift per crank turn (mm) 163 71 55 25 17 16.5
Required effort (kg) 11.5 9 11 10 10 15
Duty class to DIN 15020 1Em 1Em 1Em 1Em 1Em 1Em
Weight (kg) 7 12 13 19 26 46
DIMENSIONS (mm)
Capacity (kg) 100 250 400 750 1100 1700
A 276.5 362.5 362.5 403.5 448 509
B 117 150 150 155 195 205
C 80 100 100 80 155 155
D 11 15 15 18 18 18
E 48 60.5 70 89.1 110 139
F 110 125 140 175 190 230
G 240 350 350 350 350 350
H 150 150 150 150 150 150
I 160 220 245 266 300 362
J 147 174 182 214 231 296
K 35 45 57.5 48 65 96
L 90 130 130 170 170 170
M 35 45 57.5 48 65 93
40
HAND WINCH TYPE GOLIATH GO-CS
Lifting capacity 100 kg - 300 kg
• Worm geared, wall or base mounted winch for short movement
• Compact, inexpensive self sustaining lifting winches for loads up to 300 kg
• Base or wall mounting
• Self locking worm gear and protective cover for greater safety
• Quiet in operation; no brake ratchets
• Ideal for regular short moving strokes
• Meets the requirements of BS EN 13157
Options:
• Quick attaching handle
Product code GO-CS100 GO-CS200 GO-CS300 GO-CS100PS
Winch type Wire Rope Wire Rope Wire Rope Webbing
Lifting capacity 1st layer (kg) 100 200 300 170
Lifting capacity last layer (kg) 80 100 160
Rope diameter (mm) 3 3 or 4 4 -
Rope capacity total (m) 9 4 or 2 2 -
Capacity- webbing, 1mm thick, 20mm wide (m) - - - 4.0
Drum diameter (mm) 27 27 27 27
Numbers of rope layers 8 2 or 4 2 or 4
Gear ratio 7:1 14:1 14:1 7:1
Lift per crank turn (mm) 13 7 7 13
Required effort (kg) 6 6 6 6
Minimum load for brake function (Kg) 10 10 10 10
Weight (kg) 1.8 1.8 1.8 1.8
CS 100 CS 100PS Webbing CS 300
Wall mounting
Base mounting
41
HAND WINCH TYPE G-WG
DIMENSIONS (mm)
Worm geared general purpose winch
• Robust and safe lifting winch
• Square worm-wormwheel transmission with maintenance free bearings
• Adjustable crank, with ergonomic plastic grip
• Easy to grease worm gearbox
• Load pressure brake with double ratchet system
• Painted or zinc-plated finish
• Optional conversion bracket, CB250, 500 or 1000, to match mounting holes of the previous WG-series
• Grooved drum as option
• 2 cable compartments multi compartment possible upon request
• In compliance with DIN 15020
Options:
• As standard RAL 7044 (Silk grey) or Zinc plated (optional)
Product code WG250 WG500 WG1000 WG1500 WG2000 WG3000 WG5000
Lifting capacity - 1st cable layer (kg) 250 500 1000 1500 2000 3000 5000
Lifting capacity - last cable layer (kg) 95 239 542 845 1129 1861 3165
Required effort (kg) 6 10 13 21 9/18 12/24 25/50
Lift per crank turn, 1st layer (mm) 17 20 13 9 11/21 8/16 9/18
Rope capacity 1st layer (m) 3.1 4.4 5.2 5.4 5 5.6 5.3
Rope capacity total (m) 67 67 58 50 48 42 42
Rope diameter (mm) 5 6 9 10 13 16 20
Weight (kg) 13 16 29 28 60 78 115
Type A B C D G H J K L M N O P R S
WG250 238 145 100 192 106 102 48 14 160 191 15 354 280 171 130
WG500 269 160 115 223 107 131 70 14 190 221 15 384 325 192 130
WG1000 302 195 141 254 110 160 102 14 240 266 15 429 350 264 130
WG1500 302 250 178 254 111 160 102 14 240 278 15 441 350 306 130
WG2000 410 295 196 360 137 180 133 25 312 208 249 740 380 419 250
WG3000 436 256 251 386 137 205 165 25 376 260 308 825 380 550 250
WG5000 436 421 316 386 138 200 219 25 437 298 335 865 380 613 250
42
ADDITIONAL PNEUMATIC DRIVE FOR G-WG WINCHES
• Robust air motor
• Easy to operate joystick
• One-hand operation possible
• Suitable to use with the following winches manufactured from august 2006: G-WG1500, G-WG2000, G-WG3000, G-WG4000, G-WG5000, Pneumatic drive can be used with winches manufactured pre August 2006 with a small alteration ( please ask for details)
• Variable hoisting speed - adjustable via hand joystick.
Product code WG-PND
Air pressure Max 6 bar
Free speed ca.65 rpm
Speed at max. power (100 Nm) ca.35 rpm
Air consumption at max power 0,93 m3/m
Dimension L x H x B 395 x 150 x 115 mm
Weight 5kg
43
CONVERSION BRACKET FOR NEW STYLE G-WG250-500-1000
• Conversion plate converts the new style winch to old style WG fixing centres
Bracket Mounting holes dimension CxD (mm) WG-winch including conversion bracket
CB250 82 x 261
CB500 106 x 281
CB1000 141 x 316
HAND WINCH TYPE G-WG OPTIONS
Standard winch
Grooved drum option
Electro - Zinc Plated Split drum option
44
HAND WINCH TYPE K-WB
Lifting capacity 250 kg to 750 kg for wall mounting
• Worm gear winch used for heavy duty and theatrical applications
• Worm gear operation in an oil bath to guarantee smooth operation – popular for theatrical applications
• Enclosed cast iron construction
• Adjustable crank radius for speedy cranking
• Self locking automatic brake ensures load is held securely
• Hardened worm shaft gives long life
• Complies with BS EN 13157
Options:
• Grease lubrication allows different mounting positions
• Grooved drums
• Multi compartment drums
Product code WB250 WB500 WB750
Lifting capacity 1st layer (kg) 250 500 750
Lifting capacity last layer (kg) 210 425 624
Rope diameter (mm) 5 6 8
Rope capacity 1st layer (m) 4.8 7.9 9.2
Rope capacity total (m) 11.3 29.1 49
Number of layers 2 3 4
Ratio 16:1 16:1 25:1
Lift per crank turn (mm) 20 26 20
Required effort (kg) 9.2 14.5 16
Weight (kg) 12.5 21 42
A 205 250 330
B 137 190 243
C 120 150 205
D 85 100 125
F 219 282 350
G 94 138 182
Hø 96 125 150
J 313 479 573
K 108 238 238
L 96 112 160
M 79 101 146
N 295 440 440
O 12 14 20
P 234 290 390
DIMENSIONS (mm)
45
HAND WINCH TYPE GO-AFID (STAINLESS STEEL)
Lifting capacity 190 kg - 900 kg
• General purpose brake winch for base or column mounting in Stainless steel
• Column or base mounting
• Stainless steel 316L material
• Lightweight- inexpensive
• Smooth running, high efficiency with spur gearing
• Automatic load pressure brake prevents the unintentional lowering of the load
• Stamped gears- with gear protection
• Complies with BS EN 13157
• For wire ropes or webbing
Dimensions see page 36
Product code GO-4AFMID GO-4AFID GO-6AFID GO-8AFID GO-12AFID
Lifting capacity 1st layer (kg) 190 340 500 650 900
Lifting capacity last layer (kg) 80 180 240 270 490
Rope diameter (mm) 3 4 5 6 7
Rope capacity 1st layer (m) 0.57 1.94 1.73 1.7 1.76
Rope capacity total (m) 8 12 14 19 13
Drum diameter (mm) 27 36 45 54 63
Numbers of rope layers 8 4 5 7 5
Gear ratio 2.57:1 2.57:1 3.5:1 4.85:1 9.71:1
Lift per crank turn (mm) 37 54 45 39 23
Required effort (kg) 15 24 24 23 25
Minimum load for the brake function (kg) 10 10 10 10 10
Weight (kg) 2.2 2.8 4.4 5.2 7.6
46
HAND WINCH TYPE HA-WE/HA-KE - STAINLESS STEEL
Lifting capacity 300 kg or 500 kg for wall mounting (WE), base or wall mounting (KE)
• Compact, moderm wall or base mounted winches in stainless steel, large rope capacity
• Corrosion resistant stainless steel with gears protected by plastic casing
• Large rope capacity
• Self locking internal brake with proven security concept
• Lightweight and compact shape, folding crank, fully enclosed gears and brake
• Quiet in operation
• Available in 2 versions – wall mounting (WE) or base mounting (KE) with mounting bracket
Base mounting (KE)
Wall mounting (WE)
Product code KE (base or wall mounting)
HA-KE300 HA-KE500
Product code WE (wall mounting)
HA-WE300 HA-WE500
Lifting capacity 1st layer (kg) 300 500
Lifting capacity last layer (kg) 185 300
Rope diameter (mm) 4 5
Rope capacity 1st layer (m) 3.4 2.6
Rope capacity total (m) 29 22
Number of layers 6 6
Ratio 3.1:1 4.5:1
Lift per crank turn (mm) 64 46
Required effort (kg) 16 20
Duty class to DIN 15020 1Em 1Em
Weight (kg) 5 5
Capacity (kg) 300 500
A 337 337
B 170 170
C 135 135
D 105 105
E1 200 200
F 83 83
F1 65 65
G 160 160
H 250 250
J 130 130
K 140 140
L 60 60
MØ 11 11
NØ 13 13
DIMENSIONS (mm)
47
Stainless steel manual winch made from 304 Grade stainless steel for harsh environment applications, especially in areas with aggressive conditions ,e.g. chemical and food industry, clarification plants, waste disposal, transport and marine applications.
• Space saving internal self actuating load brake
• Lifelong lubrication
• Large rope capacity
• High efficiency
• Detachable safety crank
• Superior quality
• Proven security concept
Product code HA-ED 500 HA-ED 750
Capacity: 1st rope layer 500 kg 750 kg
Capacity: Last rope layer (4th layer)
350 kg 445 kg
Lift per crank turn 37 mm 30 mm
Effort on crank 170 N 180 N
Rope capacity 25 m 26 m
Rope diameter ø 6 mm ø 6 m
Weight 10 kg 10 kg
HAND ROPE WINCH HA-ED 2S
Stainless steel manual winch made from 304 Grade stainless steel for harsh environment applications, especially in areas with aggressive conditions ,e.g. chemical and food industry, clarification plants, special refuse disposal, transport and marine applications.
• Space saving internal self actuating load brake
• High and low speed gears
• Free wheel
• Lifelong lubrication
• Large rope capacity
• High efficiency
• Detachable safety crank
• Superior quality
Product code HA-ED 2S
Capacity: 1st rope position 500 kg
4th rope position 335 kg
Crank force low gear 170 N
Lift/crank turn: low gear 37 mm
Lift/crank turn: fast gear 280 mm
Rope diameter (mm) ø 6 mm
Weight 11 kg
HAND ROPE WINCH HA-ED 500 - 700HA-ED 500 - 700
48
HAND WINCH TYPE G-TL
Lifting capacity 150 kg for wall mounting – Designed to raise and lower basketball nets • Casing made of blow resistant black ABS plastic material
• Robust and safe with no protruding parts
• Equipped with an internal load reaction friction brake and removable safety crank to avoid unintentional operation
• Painted internal components
Product code G-TL150
Lifting capacity 1st layer (kg) 150
Lifting capacity last layer (kg) 75
Rope diameter (mm) 4
Rope capacity 1st layer (m) 1.7
Rope capacity total (m) 10
Number of layers 5
Ratio 1:1
Lift per crank turn (mm) 125
Required effort (kg) 8
Weight (kg) 6
DIMENSIONS (mm)
49
HAND WINCH TYPE HA-WM
Lifting capacity 250 kg - 500 kg for wall mounting • Low cost worm gear winch
• Designed for lowering spare wheels on trucks
• A robust, inexpensive, easily operated winch with various mounting possibilities
• Self locking worm gear drive and proven security concept
• Available as standard with a fixed handle; other options available
• Suitable for outside use
• Suitable for wire or fibre rope
Product code HA-WM250 HA-WM400 HA-WM500
Lifting capacity 1st layer (kg) 250 400 500
Lifting capacity last layer (kg) 210 350 370
Rope diameter (mm) 4 6 6.5
Rope capacity 1st layer (m) 1.6 1.9 4.6
Rope capacity total (m) 3.3 4 14
Number of layers 2 2 4
Ratio 25:1 25:1 25:1
Lift per crank turn (mm) 5.8 7.5 13
Required effort (kg) 6.6 18 14
Duty class to DIN 15020 1Em 1Em 1Em
Weight (kg) 4.1 6 12
250 kg
400 kg
500 kg
DIMENSIONS (mm)
50
HAND WINCH TYPE HA-LW
Lashing capacity up to 2000 kg • Lashing winch with removable gearbox
• Consists of a winch unit and a detachable gearbox with crank for lashing of strapping or wire rope The gearbox has a ratio of 25:1 and when connected to the winch unit winds 7.5mm per turn of crank
• Easy to use, the winch units are permanently mounted and the self locking detachable gear box is mounted when a movement is required
Product code gearbox HA-LWGEAR
Product code winch HA-LWDRUM
Lashing capacity 1st layer (kg) 2000
Rope diameter (mm) 8
Rope capacity total (m) 9
Strap dimensions (mm) 50x5
Strap capacity (m) 3
Ratio 25:1
Lift per crank turn without gearbox (mm) 180
Lift per crank turn with Gearbox (mm) 7.5
Required effort (kg) 18
Weight of winch (kg) 6.1
Weight of gearbox (kg) 3.2
Winch Unit
Gearbox Unit