WiFi Smart Security Kit

and mute, low, medium, high volume are optionalView the entire system anywhere anytime

Support up to 20pcs wireless detectors and 5pcs remote controllers

8 kinds alarm sound are optional Timing Arm and Disarm

With night light function,it can be linkage accessories to automation

1.Turn on/off the hub.2.The hub enters WiFi configuration mode when LED red light flashing.

1. When hub get power, Led red light flashes quickly automatically, the hub enters WiFi configuration mode.

2. IF in 1st step the hub is not connected successfully, press the button ② about 3 seconds until see the red light flashes slowly, the hub will get into AP pairing mode.

3. IF the first two steps failed to connect, then l ong Press button ② about 10 seconds until you hear five "beeps", the hub will be reset.

Specification of ④ :

1. WiFi connection is successful: Red light is always on2. WiFi connection is invalid: Light is out3. WIFI configuration mode: Led flash Quickly ; AP mode: Led flash Slowly

Note (AP Mode CONNECTION ): IF connection failed under normal connection, and it maybe is a network problem. You can now be connected with the following steps: "AP MODE"

1. Press the Reset button for 5 seconds and make sure your device light is flashingslowly.2. Press the icon '+' on the top right corner. Select "Security&Sensor". Then, select the "Alarm" type. Go to the upper right corner. Then, press “AP MODE”. 3. Check if the connection light is flashing slowly. Press"Confirm indicator slowly blink". Select your 2.4GHz network and enter WIFI password.4. Then the screen will show "connect your mobile phone to the device's hotspot".Press "Go To Connect" and connect. The screen will jump to your phone'ssettings wifi connection ，so enter the phone "WI-FI".5. Now, you will see the mobile phone WIFI. There will be a connection option

： “Smartlife-XXX”, select it. Return to "Smartlife The APP" screen, and you will see the connection percentage.6. Wait until the connection is successful.

Smart life

click "+"to add device

1.Launch the “Smart Life”,please make sure that your phone is Connected to WIFI and hub is covered by WIFI signal.(Note: the network must be 2.4Ghz)2.Open Smart life APP register,after login,click add device.3.Choose device type as Alarm when the below interface appeared.

(Fail to connect, pls reference FAQ of setting interface.)

choosedevicetype as"Alarm"

At first please turn on the hub,you will

4.After choosing device,please turn on the hub, you will hear a continuousbeeping sound and see the Red light flashes quickly.

red

5.Network:need user phone's wifi and device's wifi are under the same network

13

Binding operation with amazon alexa1. Click HOME button in alexa APP interface,see below:2. Drop-down menu appeared after click HOME button,then click skills button,see below:

6.After choosing net,the device willbe connected,when processing bar shows 100%,it is suucessfully added.

7.If connected,red light will normally on.

9

Add SensorsSensor add: Find Accessories, press "+ add" and Trigger the sensor that needs to

be activated within 5 seconds.

10

Phone Notification Setting

"+"--"Device"--"RF Gateway" -- "Alarm"--"SOS"

（America,Canada,United Kingdom,China Supported Only）

11

Phone Notification Setting（America,Canada,United Kingdom,China Supported Only）

12

Phone Notification Setting（America,Canada,United Kingdom,China Supported Only）

16

5. Click chose smart life APP,following interface appeared for authorization and activation.6. After authorization and activation,enter your account and code,then click link now for

connection.7. After click link now,click authorize for authorization. 8. Binding finished when below interface appeared.

14

Binding operation with amazon alexa3. After clicking skills button,see below picture,search smart life APP.

15

4. After searched smart life APP,below interface appeared,those APP in the red squareframe.

17

9. After binding smart life with amazon alexa,return to HOME interface.10. Click home button,below menu appeared,click smart home11. After click smart home,below interface appeared,click devices button.12. After click devices button,below interface appeared,click devices button

18

13. Click the "devices"button again and app will tell you ,wait about 2o nsecondsfor devices to search.Upon completion of seach,all bounded products name appeared.

14. After searching,you can quit smart life app and amazon alexa app,you can control byvoice then.

15. Alexa wakeup word set by amazon regulation,you can revise also.

19

Once your account has been linked successfully,you can start controlling the smart alarm with amazon alexa using voice command.Such as:“Alexa,arm XX in away mode”“Alexa,arm XX”“Alexa,disarm XX”“Alexa:What's your voice code for my XXXX; Voice Code XXXX”“Alarmed” or “Disarmed”

20

21

22

23

24

25

Home Protection

SOS

Removal Mode

26

27

28

29

button is pressed.（Note:Please add doorbell as sensor not remote.）

30

Operating Voltage:3.7v 550mAh

Support 5 remote controllers and 20 wireless 433mhz accessories

4.Fail to connect the smart hub to the router.

5. No APP notification when the device is triggereda)Make Sure APP notification permission is turned on in mobile phone settings.

!

31

Alarm volume:0~120dB

12V 23A battery

6F22 DC9V battery

32

Operating Voltage:3V DC(2* CR2016 battery)

Make Your Home Smarter

More RF433 Detectors product for your choose

Smoke Detector Gas Dectector

Glass Break Detector Water Leakage Detector