WiDy NaNo 640V-S Module Datasheet - Pembroke Instruments · The WIDY NaNo 640V-S exists in...
15
Page : 1/15 MCxxxx-xxx DATASHEET CAMERA DOCPC14002V02 WiDy NaNo 640V-S Module Datasheet [email protected]
Transcript of WiDy NaNo 640V-S Module Datasheet - Pembroke Instruments · The WIDY NaNo 640V-S exists in...
Page : 1/15
MCxxxx-xxx
DATASHEET CAMERA
DOCPC14002V02
WiDy NaNo 640V-S
Module Datasheet
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 2/15
DOCPC14002V03
DOCUMENT
Date Modification Revision
17/06/2016 Document creation V1.0
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 3/15
DOCPC14002V03
Table of contents DOCUMENT ......................................................................................................................................... 2
OVERVIEW ........................................................................................................................................... 4
Commercial Reference .................................................................................................................... 4
References ........................................................................................................................................... 4
Subject ................................................................................................................................................. 4
Definitions, Terminology and abbreviations ....................................................................................... 5
Sensor description ............................................................................................................................... 5
PRESENTATION AND CONFIGURATION ................................................................................... 6
General presentation .......................................................................................................................... 6
Camera configuration .......................................................................................................................... 6
Mechanical dimension and optics interface ....................................................................................... 7
Electrical Video Interface .................................................................................................................... 8
FUNCTIONALITIES .......................................................................................................................... 10
Camera .............................................................................................................................................. 10
Software development kit ................................................................................................................. 11
ELECTRO-OPTICS CHARACTERISTICS ...................................................................................... 12
ENVIRONMENT & ACCESSORIES ................................................................................................ 13
ANNEXES \ NaNo Module Interface ............................................................................................. 14
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 4/15
DOCPC14002V03
OVERVIEW
Commercial Reference
This module is an OEM version so it will be supplied without mechanical parts.
Optional mounting part can be supplied upon request as per drawing enclosed.
For optional mechanics, please contact your sales representative.
References
Ind
ex
Title of document Revision Issued by
R1 NSC1201 sensor datasheet V1.1 NIT
R2 SWIR camera interface - NIT
R3 SWIR module interface - NIT
R4 WiDyVision Reference guide NIT
A reference document contains elements which are used to draft this
specification.
Subject This document specifies the camera:
Sensor description
Presentation
Mechanical dimension and optics interface
Electrical and video interface
Functionalities
Software compatibility
Electro-optics characteristics
Environment
Accessories
Annexes
Commercial
reference
Description Ordering
information
WIDY NANO 640V-S USB3.0 VGA NANO SWIR OEM 9SNM1201
IY32VF0X
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 5/15
DOCPC14002V03
Definitions, Terminology and abbreviations - NIT : New Imaging Technologies
- FPGA : Field Programmable Gate Array
- L : Length
- H : Height
- W : Width
- WDR : Wide Dynamic Range
- FPN : Fixed Pattern Noise
Sensor description
Optical format 1 inch
Output Buffered analog differential
Active pixels 640x512
Material InGaAs
QE ~70%
Pixel size Square 15x15µm²
Readout mode Global Shutter
Option Column FPN correction
Dynamic range 120dB typical
Power consumption 260mW
Packaging CLCC52
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 6/15
DOCPC14002V03
PRESENTATION AND CONFIGURATION
General presentation
The WIDY NaNo 640V-S exists in different versions, module or camera which
integrates the sensor NSC1201-SI. This camera does not integer control of
temperature thanks to the pixel design and the NUC correction.
Camera configuration The camera is composed of 4 boards:
Sensor board which integrates the sensor
ADC board which integrates the 14bit Analog to digital conversion
FPGA board which integrates the FPGA for sensor signal generating
and image formatting
Interface board which integrates the management of the main power
supply, the trigger, and USB controls.
Figure 1 Camera architecture
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 7/15
DOCPC14002V03
SPECIFICATIONS
Mechanical dimension and optics interface
Mechanical
dimensions
L : 25mm H: 25mm W: 29mm (with the connector)
Without Mechanical Fixing Mount
Module
with
optional
mounting
part
Mount Not applicable
Weight Module < 20g
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 8/15
DOCPC14002V03
Interface
Electrical Video Interface
Figure 2 electrical and videos interface
Power supply
Power supply signal is provided through standard female USB3.0 plug
connector.
Power supply range is 4 to 6V
Reference Designation Manufacturer
897-10-010-00-300002 Mini USB 3.0 MILL-MAX
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 9/15
DOCPC14002V03
Output Data
The WIDY NaNo 640V-S provides a 14-bit output data through the USB 3.0 [1]
connector. The software displays the processed image sensor (8 bits).
Synchronization connectors
A synchronization signal can be provided through a standard female SMC
connector [2].
2 configurations modes are available:
o From camera to external source, SMC connector is defined as an
output
o From external source to camera, SMC connector is defined as an input
The voltage range of the trigger signal must be [0-3.3V / LVTTL format].
High level: integration start on sensor pixels.
Falling edge: Integration stop and beginning of the reading and sent of the
image on the video output connector.
Reference Designation Manufacturer
152140 SMC connector Amphenol
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 10/15
DOCPC14002V03
FUNCTIONALITIES
Camera Different features can be controlled with WiDyVISION Software - for more
details see [R4].
Camera
mode
Frame rate Pixel clock @25MHz: Adjustable between 20Hz to 50Hz (in
full resolution)
Pixel clock @66MHz: Adjustable between 50Hz to 100Hz (in
full resolution)
Mode of sensor (ITR) Standard Global shutter:
Integration time variable from 100us to 200ms (255 values).
Partial reading mode Possible to integer just a part of the sensor (ROI) and
display only this window on the video output. This option
allows a frame rate increase on the ROI
Software
control (all
functions
are
realized on
computer)
Min/Max Settings for
display – Histogram
Stretching
Automatic or Manual.
In Automatic the gain and offset are calculating depending
of the histogram.
In Manual you can choose the gain and offset you want to
apply on the image.
Zoom Bicubic zoom function available.
Gamma correction From 0 to 3.
Contrast enhancement Contrast improvement by local histogram equalization
Colour maps Grey, Jet, Hot, HSV, Rainbow, Cool, Night Vision
Cross Hair Display of the cross hair with variable position, color and
dimension.
Filters Canny, Laplace, Sharp, High Boost, Invert
NUC correction Correction 1-Point or 2-Point calculated in factory (possible
to realize it also by user) – For more details See [R4]
Bad pixel correction Correction of bad pixel in factory (possible also by user)–
For more details See [R4]
Recording videos Recording video in .AVI or. PTW (Raw 14 bits)
Image capture .jpeg, .png or. Tiff
Temperature Temperature reading.
Resolution: 0.1462°C/LSB
Horizontal and vertical
inversion
Flip on the image in horizontal and vertical
Analysis
Functions
(all
functions
are
realized on
computer)
Histogram
computation
Statistics analysis
ROI (region of interest)
Cross section Profiles
Rectilinear profiles
Linear profiles
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 11/15
DOCPC14002V03
SOFTWARE COMPATIBILITY
The Software WiDyVISION uses Cypress driver.
WiDyVISION is compatible only with Windows 7, 8, 8.1 or 10.
We don’t guarantee that the software will work with previous versions of
Windows.
We highly recommend to not use Renesas host controller on windows 7 PC
for USB3.0 cameras.
Software development kit
A SDK is delivered with the camera. It calls NITLIBRARY.
The SDK is written on C++ which provides primary functionalities to interface
with NIT USB cameras. It contains functions related to the device
management, the parameters settings (pixel clock, exposure time, sensor
mode…) to integrate our cameras in your project.
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 12/15
DOCPC14002V03
ELECTRO-OPTICS CHARACTERISTICS
Consumption <1.5W TECless
Dynamic Range 120dB typical in Log
MTF @ 33pl/mm (typical) >50%
Logarithmic sensibility 600 lsb/decade
WiDy NaNo 640V-S
Module Datasheet
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice. Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 13/15
DOCPC14002V03
ENVIRONMENT & ACCESSORIES
Storage temperature -10 to 80°C
Operating Temperature 0 to 65°C
Vibration 15g RMS from 5Hz to 500Hz (on the three axes)
Shock 3 bumps at 64g ½ sinus during 5 ms (on the three axes)
*Available in option
USB3 / Mini US3
cable
SDK BNC/SMC cable
WiDyVision Software
Adaptator CS/C
WIDY NaNo 640V-S
*
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice.
Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 14/15
WiDy NaNo 640V WDR NaNo OEM
REV: 1.0
WiDy NaNo 640V-S-DS
DOCPC14002V03
ANNEXES \ NaNo Module Interface
Magic USB2.0 camera interface drawing
*Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by NIT without notice.
Products are only warranted by NIT to meet NIT’s production data sheet specifications.
Page 15/15
WiDy NaNo 640V WDR NaNo OEM
REV: 1.0
WiDy NaNo 640V-S-DS
DOCPC14002V03
NIT
1 Impasse de la noisette, Bat D- 1er étage, BP426
91370 Verrières Le Buisson Cedex, France
Tel +33(0) 1 64 47 88 58
www.new-imaging-technologies.com
NIT, New Imaging Technologies and Native WDR, are trademarks of New Imaging Technologies.
