WIDE CIRULATION - Bureau of Indian Standards3596-3604)_30092015.pdf · WIDE CIRULATION DOCUMENT...

WIDE

CIRULATION DOCUMENT DESPATCH ADVICE TECHNICAL COMMITTEE: LITD 07 Ref: Date 28-09-2015

LITD 07/T-43,102,106,

137,144,149,169,179-180

--------------------------------------------------------

ADDRESSED TO:

1. All Members of Audio, video and multimedia Sectional Committee, LITD 07

2. All Principal Members of Electronics and Information Technology Division Council (LITDC)

3 All Members of all the Panels of LITD 07 Sectional Committee

4 All others interested

Dear Sir(s),

Please find enclosed the following Draft Indian Standards in Wide Circulation in Annex.

Kindly examine these draft standards and forward your views stating any difficulties which you are likely to

experience in your business or profession, if this is finally adopted as a National Standards.

Last Date for comments : 29-11-2015

Comments, if any, may please made in the format indicated and mailed to the undersigned at the address given

below.

In case no comments are received or comments received are of editorial nature, you may kindly permit us to presume

your approval for the above document as finalized. However, in case of comments of technical in nature are received

then it may be finalized either in consultation with the Chairman, Sectional Committee or referred to the Sectional

committee for further necessary action if so desired by the Chairman, Sectional Committee.

This document is identical with corresponding IEC Standard and is not attached with this letter. For considering

comments on the document corresponding IEC Standard may be referred. In case of soft copy of IEC standard is

required, a request may be sent by mail.

Thanking you Yours faithfully,

(Narendra Singh)

Head (Electronics & IT) E-mail: [email protected]

[email protected]

Encl: As above Tele Fax: 23237093

mailto:[email protected]

ANNEX

Sl No. Doc. No. Title

1 DOC:LITD 07 ((3596)

/IEC 60118-1 (1995) + amd 1998)

Hearing aids Part 1: Hearing aids with induction

pick-up coil input (First Revision of IS 10776(Part 2): 1984)

2 DOC:LITD 07 (3597)

/IEC 60318-5 : 2006

Reference coupler for the measurement of hearing aids

using earphones coupled to the ear by means of ear

insert

(First Revision of IS 10781: 1984)

3 DOC:LITD 07 (3598)

/IEC 611142-2 (1996) Methods of measurement on receiving antennas

for satellite broadcast transmission in the 11/12

GHz band

Part 2:Mechanical and environmental tests on

individual and collective receiving antennas (First Revision IS 13987(Part 2): 1994)

4 DOC:LITD 07 (3599)

/IEC 60728-10 (2014)

Cable networks for television signals, sound

signals and interactive services

Part 10 System performance for return paths (First Revision lS 14231 (Part 8): 2002)

5 DOC:LITD 07 (3600)

/IEC 60942( 2003)

Electroacoustics - Sound Calibrators (First Revision

IS 15059:2001)

6 DOC:LITD 07 (3601) /Amd 1 IEC 60958-4( 2003)

Amd No. 1 to lS/IEC 60958 (Part 4): 2003 Digital

audio interface Part 4 professional applications (TA4)

7 DOC:LITD 07 (3602) /IEC62623: 2012

Desktop and notebook computers Measurement of energy consumption

8 DOC:LITD 07 (3603) /IEC61260-1 (2014)

lS 6964: 2001 Electrocoustics Octave-band and fractional- octaveband filters

(Second Revision lS 6964: 2001)

9 DOC:LITD 07 (3604)

/IEC62638-1 : 2014

Audio/video information and communication

technology equipment Part 1 : Safety requirements

: 07 07/-43,102,106, 28-09-2015 137,144,149,169,179-180

-------------------------------------------------------- : 1) , 07 2) 3) 4) () : , ,

28-11-2015

,

, ,

( )

( ) : : : [email protected]

mailto:[email protected]

1 DOC:LITD 07 ((3596)

/IEC60118-1 (1995) + and

1998)

- 2: - ( 10776 ( 2) : 1984 )

2 DOC:LITD 07 (3597)

/IEC60318-5 : 2006

- ( 10781 : 1984 )

3 DOC:LITD 07 (3598)

/IEC611142-2 (1996)

2 ( 13987 2: 1994 )

4 DOC:LITD 07 (3599)

/IEC 60728-10 (2014)

, 10 ( 14231 8: 2002 )

5 DOC:LITD 07 (3600)

/IEC 60942( 2003)

- ( 15059 : 2001 )

6 DOC:LITD 07 (3601)

/Amd 1 IEC 60958-4(

2003)

. 1 / 60958 4: 2003 4 (4)

7 DOC:LITD 07 (3602)

/IEC62623: 2012

8 DOC:LITD 07 (3603)

/IEC61260-1 (2014)

- - ( 6964: 2001 )

9 DOC:LITD 07 (3604)

/IEC62638-1 : 2014

/ 1 :

Doc No.: LITD 7 (3596)

IS 10776(Part 2) : .........

IEC 60118-1 : 1995

- 2: - ( )

Indian Standard

HEARING AIDS

PART 2: HEARING AIDS WITH INDUCTION PICK-UP COIL INPUT

(First Revision)

ICS 17.140.50

BIS 2015 BUREAU OF INDIAN STANDARDS

MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG

NEW DELHI 110002

............2015 Price Group

Audio, Video and Multimedia systems and Equipment Sectional Committee, LITD 07 NATIONAL FOREWORD

This Indian Standard which is identical with IEC 60118-1:1995 Hearing aids Part 1: Hearing aids with induction pick-up coil input issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian Standards on the recommendation of the Audio, Video

and Multimedia systems and Equipment Sectional Committee, LITD 07 and approval of the

Electronics and Information Technology Division Council.

This standard was first published in 1984 and was identical to IEC 60118-1 : 1983. This revision

is being published to align it with the latest version of IEC 60118-1 : 1995. Amendment 1(1998)

issued in the year 1998 to the above International standard has been incorporated in this standard.

The text of IEC Standard has been approved as suitable for publication as an Indian Standard

without deviations. Certain terminology and conventions are, however, not identical to those used

in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard.

b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker.

In this adopted standard, reference appears to certain International Standards for which Indian

Standard also exist. The corresponding Indian Standard which is to be substituted in its respective

place is listed below along with its degree of equivalence for the edition indicated:

The technical committee has reviewed the provisions of the following International Standard

referred in this adopted standard and has decided that it is acceptable for use in conjunction with

this standard. For updated references, the latest edition of the referenced document applies,

including any corrigenda and amendment.

International Standards Title

IEC 60711:1981

Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts

Only the English language text has been retained while adopting it in this Indian Standard and as

such the page numbers given here are not the same as in the IEC publication.

International Standards Corresponding Indian Standard Degree of

Equivalence

IEC 60118-0:1983, Hearing aids Part 0: Measurement of electroacoustical

characteristics Amendment 1 (1994)

IS 10776(Part 1):1984 Methods of

measurement of electro-acoustical

characteristics of hearing aids: Part 1

General measurements for air-conduction

hearing aids

(Superseding IS 3641:1976)

Technical

Equivalent

For the purpose of deciding whether a particular requirement of this standard is complied with,

the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded

off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the

specified value in this standard.


IS 10781 :........

IEC 60318-5 : 2006

( )

Indian Standard

ELECTROACOUSTICS SIMULATORS OF HUMAN HEAD AND EAR PART 5: 2 cm

3 coupler for the measurement of hearing aids and

earphones coupled to the ear by means of ear inserts

(First Revision)

ICS 17.140.50



NEW DELHI 110002

............2015 Price Group


This Indian Standard which is identical with IEC 60318-5:2006 Electroacoustics Simulators of human head and ear Part 5 : 2 cm3 coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian Standards on the recommendation of the

Audio, Video and Multimedia systems and Equipment Sectional Committee, LITD 07 and

approval of the Electronics and Information Technology Division Council.

This standard was first published in 1984 and was identical to IEC 60126 : 1973. The IEC 60126

was further replaced by IEC 60318-5. This revision is being published to align it with the latest

version of IEC 60318-5 : 2006.







Standard also exist. The corresponding Indian Standard which is to be substituted in its respective

place is listed below along with its degree of equivalence for the edition indicated:

The technical committee has reviewed the provisions of the following International Standards

referred in this adopted standard and has decided that they are acceptable for use in conjunction

with this standard. For updated references, the latest edition of the referenced document applies,



IEC 61094-4

Measurement microphones Part 4: Specifications for working standard microphones

BIPM/IEC/ISO/IUPAC/IUPAP/OIML:1995,

Guide to the expression of uncertainty in measurement (GUM)


Equivalence

ISO 389-2 Acoustics Reference zero for the calibration of audiometric

equipment Part 2: Reference equivalent threshold sound pressure

levels for pure tones and insert

earphones

IS 4755:1987 Reference zero for the

calibration of pure tone air conduction

audiometers

(first revision)

Technical

Equivalent


IS 13987(Part 2) :.........

IEC 61114-2 : 1996

2 ( )

Indian Standard

METHODS OF MEASUREMENT ON RECEIVING

ANTENNAS FOR SATELLITE BROADCAST TRANSMISSION IN THE 11/12 GHZ BAND

PART 2:Mechanical and environmental tests on individual and

collective receiving antennas (First Revision)

ICS 33.120.40



NEW DELHI 110002

............2015 Price Group


This Indian Standard which is identical with IEC 61114-2 :1996 Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band Part 2 :

Mechanical and environmental tests on individual and collective receiving antennas issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian

Standards on the recommendation of the Audio, Video and Multimedia systems and

Equipment Sectional Committee, LITD 07 and approval of the Electronics and Information

Technology Division Council.

This standard (Part 2) is one of the parts of a series of standards on Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band. The other part in this series is:

Part 1 Electrical measurements

This standard was first published in 1995 and assistance has been derived from IEC

Document 12 A ( Sectt ) 332 while preparing this standard. This revision is being published

in order to align it with the latest version of IEC 61114-2 : 1996.


without deviations. Certain terminology and conventions are, however, not identical to those

used in Indian Standards. Attention is particularly drawn to the following:




Standard also exist. The corresponding Indian Standard which is to be substituted in its

respective place is listed below along with its degree of equivalence for the edition indicated:


referred in this adopted standard and has decided that they are acceptable for use in

conjunction with this standard. For updated references, the latest edition of the referenced

document applies, including any corrigenda and amendment.


Equivalence

IEC 61114-1: 1992, Methods of

measurement on receiving antennas for

satellite broadcast transmissions in the

12 GHz band Part 1: Electrical measurements on DBS receiving

antennas

IS 13987(Part 1):2012 Receiving

antennas for satellite broadcast

transmission in the 11/12 GHz band

Part 1 Electrical measurements

(first revision)

Identical


IEV 50(712): 1992 International Electrotechnical Vocabulary (lEV) Chapter 712: Antennas

IEC 68-1: 1988, chloride solution)

Environmental testing Pa rt 1: General and guidance

IEC 68-2-11: 1981, Environmental testing Part 2: Tests Test Ka: Salt mist IEC 68-2-14: 1984 , Environmental testing Part 2: Tests Test N: Change of

temperature

IEC 68-2-52: 1984, Environmental testing Part 2: Tests Test Kb: Salt mist, cyclic (sodium

Only the English language text has been retained while adopting it in this Indian Standard and

as such the page numbers given here are not the same as in the IEC publication.

For the purpose of deciding whether a particular requirement of this standard is complied

with, the final value, observed or calculated, expressing the result of a test or analysis, shall be

rounded off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.


IS 14231 (Part 8) : ........

IEC 60728-10 : 2014

, 10

( )

Indian Standard

CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS

AND INTERACTIVE SERVICES

PART 10 SYSTEM PERFORMANCE FOR RETURN PATHS

(First Revision)

ICS 33.060.40



NEW DELHI 110002

............2015 Price Group


This Indian Standard which is identical with IEC 60728-10 : 2014 Cable networks for television signals, sound signals and interactive services Part 10: System performance for return paths issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of

Indian Standards on the recommendation of the Audio, Video and Multimedia systems and

Equipment Sectional Committee, LITD 07 and approval of the Electronics and Information


This standard (Part 8) is one of the parts of a series of standards on Cable networks for television signals, sound signals and interactive services. The other part of this series are:

Part 1 Safety requirements

Part 3 Active coaxial wideband distribution components

Part 4 Passive Coaxial Wideband Distribution Components

Part 5 Headend

Part 7 Electromagnetic Compatibility of Systems

Part 9 Interfaces of Cabled Distribution Systems for Digitally Modulated Signals

Part 10 Optical Equipment

This standard was first published in 2002 and was identical to IEC 60728-10 : 2001. This revision

is being published to align it with the latest version of IEC 60728-10 : 2014.







Standards also exist. The corresponding Indian Standards, which are to be substituted in their

respective places, are listed below along with their degree of equivalence for the editions

indicated:


Equivalence

IEC 61000-4-2:1995, Electromagnetic

compatibility (EMC) Part 4: Testing and measurement techniques Section 2: Electrostatic discharge immunity

test. Basic EMC Publication

IS 14700(Part 4/Sec 2):2008

Electromagnetic compatibility (EMC)

Part 4: Testing and measurement

techniques Section 2: Electrostatic

discharge immunity test

(first revision)

Identical

The technical committee has reviewed the provisions of the following International Standards referred

in this adopted standard and has decided that they are acceptable for use in conjunction with this

standard. For updated references, the latest edition of the referenced document applies, including any

corrigenda and amendment.


IEC 61094-1:2000, Measurement microphones Part 1: Specifications for laboratory standard microphones

IEC 61094-2:1992, Measurement microphones Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique

IEC 61094-4:1995, Measurement microphones Part 4: Specifications for working standard microphones

IEC 61094-5:2001, Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison

ISO 266:1997, Acoustics Preferred frequencies ISO/IEC Guide :1995, Guide to the expression of uncertainty in measurement ISO Publication:1993, ISBN 92-67-01075-1

International vocabulary of basic and general terms in metrology

OIML International Recommendation R 97:1990

Barometers


compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated,radio-frequency,

electromagnetic field immunity test.

Basic EMC Publication

IS 14700(Part 4/Sec 3):2008


Part 4: Testing & measurement

techniques Sec 3 Radiated, radio

frequency, electromagnetic field

immunity test (First Revision)

Identical


compatibility (EMC) Part 6: Generic standards Section 1: Immunity for residential, commercial and light-

industrial environments

IS 14700(Part 6/Sec 1):2008

Electromagnetic compatibility (EMC)-

Part 6 Generic standards Sec 1

Immunity for residential, commercial

and light-industrial environments

Identical

IEC 61672-1:2002, Electroacoustics Sound level meters Part 1: Specifications

IS 15575(Part 1):2000

Electroacoustics - Sound level meters -

Part 1: Specifications

(Superseding IS 9779:1981)

Identical

CISPR 22:1997, Information

technology equipment Radio disturbance characteristics Limits and methods of measurement

IS 6873(Part 7):2012

Limits and methods of measurements

of Radio disturbance characteristics

Part 7 Information technology

equipment (first revision)

Identical

CISPR/IEC 61000-6-3:1996,


Part 6: Generic standards Section 3: Emission standard for residential,

commercial and light-industrial

environments

IS 14700(Part 6/Sec 3):2002


Part 6: Generic standards Section 3:

Emission standards for residential,

commercial and light industrial

environment

Identical


IS 15059 : ..........

IEC 60942 : 2003

- ( )

Indian Standard

ELECTROACOUSTICS SOUND CALIBRATORS

(First Revision)

ICS 17.140.50



NEW DELHI 110002

............2015 Price Group


This Indian Standard which is identical with IEC 60942 : 2003 Electroacoustics Sound calibrators issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian Standards on the recommendation of the Audio, Video and Multimedia systems

and Equipment Sectional Committee, LITD 07 and approval of the Electronics and Information


This standard was first published in 2001 and was identical to IEC 60942 : 1997. This revision is

being published to align it with the latest version of IEC 60942 : 2003.








respective places, are listed below along with their degree of equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree of

Equivalence

IEC 61000-4-2:1995,

Electromagnetic compatibility

(EMC) Part 4: Testing and measurement techniques Section 2: Electrostatic discharge immunity

test. Basic EMC Publication

IS 14700(Part 4/Sec 2):2008


(EMC) Part 4: Testing and

measurement techniques Section 2:

Electrostatic discharge immunity test

(First Revision)

Identical

IEC 61000-4-3:2002,


(EMC) Part 4-3: Testing and measurement techniques Radiated,radio-frequency,

electromagnetic field immunity test.

Basic EMC Publication

IS 14700(Part 4/Sec 3):2008


(EMC) Part 4: Testing &

measurement techniques Sec 3

Radiated, radio frequency,

electromagnetic field immunity test

(First Revision)

Identical

IEC 61000-6-1:1997,


(EMC) Part 6: Generic standards Section 1: Immunity for residential,


environments

IS 14700(Part 6/Sec 1):2008


(EMC)-Part 6 Generic standards Sec

1 Immunity for residential,


environments

Identical



with this standard. For updated references, the latest edition of the referenced document applies,



IEC 61094-1:2000, Measurement microphones Part 1: Specifications for laboratory standard microphones

IEC 61094-2:1992, Measurement microphones Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique

IEC 61094-4:1995, Measurement microphones Part 4: Specifications for working standard microphones

IEC 61094-5:2001, Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison

ISO 266:1997, Acoustics Preferred frequencies ISO/IEC Guide :1995, Guide to the expression of uncertainty in measurement ISO Publication:1993,

ISBN 92-67-01075-1, International vocabulary of basic and general terms in metrology

OIML International Recommendation R 97:1990,

Barometers



For the purpose of deciding whether a particular requirement of this standard is complied with, the

final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off

in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified

value in this standard.

IEC 61672-1:2002, Electroacoustics

Sound level meters Part 1: Specifications

IS 15575(Part 1):2000

Electroacoustics - Sound level meters

- Part 1: Specifications (Superseding

IS 9779:1981)

Identical


technology equipment Radio disturbance characteristics Limits and methods of measurement

IS 6873(Part 7):2012

Limits and methods of measurements

of Radio disturbance characteristics

Part 7 Information technology

equipment [first revision]

Identical

CISPR/IEC 61000-6-3:1996,


(EMC) Part 6: Generic standards Section 3: Emission standard for

residential, commercial and light-

industrial environments

IS 14700(Part 6/Sec 3):2002


(EMC) Part 6: Generic standards

Section 3: Emission standards for

residential,


environment

Identical

AMENDMENT NO.1 SEPT 2015

TO

IS/IEC 60958(PART 4) : 2003 DIGITAL AUDIO INTERFACE PART 4 PROFESSIONAL

APPLICATIONS (TA4)

This amendment is identical to amendment 1 (2008) to IEC 60958-4(2003) issued by

International Electrotechnical Commission (IEC).

Doc No. LITD 07(3602)

IEC 62623 : 2012

Indian Standard

DESKTOP AND NOTEBOOK COMPUTERS MEASUREMENT OF ENERGY CONSUMPTION

ICS 35.160



NEW DELHI 110002

2015 Price Group

Audio, Video and Multimedia Systems and Equipments Sectional Committee. LITD 07

NATIONAL FOREWORD

This Indian Standard which is identical with IEC 61260-1 : 2014 Desktop and notebook computers Measurement of energy consumption issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian Standards on the recommendation of the

Audio, Video and Multimedia Systems and Equipments Sectional Committee and approval of

the Electronics and Information Technology Division Council.

The text of ISO/IEC Standard has been approved as suitable for publication as an Indian

Standard without deviations. Certain conventions are, however, not identical to those used in

Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard

b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as decimal marker.

The technical committee has reviewed the provisions of following International Standards


with this standard. For undated references, the latest edition of the references document applies,


International Standard/ Title

Other publication

IEC 60038:200 ECMA-389 Procedure for the Registration of Categories for ECMA-383

2nd edition

Only the English language text in the International Standard has been retained while adopting it

in this Indian Standard and as such the page numbers are not the same as in the IEC Publication.

For the purpose of deciding whether a particular requirement of this standard is complied with

the final value, observed or calculated, expressing the result of a test or analysis, shall be

rounded off in accordance with IS 2:1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of

the specified value in this standard.


IS 6964 : IEC 61260-1 : 2014

- -

( )

Indian Standard

ELECTROACOUSTICS OCTAVE-BAND AND FRACTIONAL OCTAVE BAND FILTERS PART 1 SPECIFICATIONS

(Second Revision)

ICS 97.020



NEW DELHI 110002

2015 Price Group

Audio. Video and Multimedia Systems and Equipments Sectional Committee. LITO 07

NATIONAL FOREWORD

This Indian Standard (Second Revision) which is identical with IEC 61260-1 : 2014

Electroacoustics Octave-band and fractional Octave-band filters Part 1 specifications' issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian

Standards on the recommendation of the Audio, Video and Multimedia Systems and Equipments

Sectional Committee and approval of the Electronics and Information Technology Division

Council.

This standard was first revised in 2001 and was identical to IEC 61260 : 1995. This revision is

being published to align it with the latest version of IEC 61260-1 : 2001.







Standard also exist. The corresponding Indian Standard which is to be substituted in its

respective place is listed below along with its degree of equivalence for the edition indicated:

International Standard Corresponding Indian Standard Degree of Equivalence

IEC 61000-4-2


(EMC) Part 4-2: Testing and measurement techniques Electrostatic discharge

immunity test

IS 14700(Part 4/Sec 2) : 2008


(EMC) Part 4 Testing and

measurement techniques Section 2:

Electrostatic discharge immunity

test (first revision)

Identical with IEC

61000-4-2 : 2001

IEC 61000-4-3:2006,


(EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency,

electromagnetic field immunity

test

IS 14700(Part 4/Sec 3) : 2008


(EMC) Part 4 : Testing &

measurement techniques Sec 3

Radiated, radio frequency,

electromagnetic field immunity test

(first revision)

Identical

IEC 61000-6-1:2005,


IS 9000 (Part 7/ Sec 7) : 2006 Basic

environmental testing procedures for

Identical with IEC

60068-2-75 : 1997

(EMC) Part 6-1: Generic standards Immunity for residential, commercial and

light-industrial environments

electronic and electrical items: Part

7 Impact test section 7 Test Eh :

Hammer tests

IEC 61000-6-2:2005


(EMC) Part 6-2: Generic standards Immunity for industrial environments

IS 14700(Part 6/Sec 2):2008


(EMC)-Part 6 Generic standards Sec

2 Immunity for industrial

environments

Identical with IEC

61000-6-2:2005

IEC 61000-6-3:2006


(EMC) Part 6-3: Generic standards Emission standard for residential, commercial and

light-industrial environments

Amendment 1:2010

IS 14700(Part 6/Sec 3):2002


(EMC) Part 6: Generic

standards Section 3: Emission

standards for residential,


environment

Identical with IEC

61000-6-3 : 1996

IEC 61672-1, Electroacoustics


IS 15575(Part 1) : Electroacoustics


(first revision)

Identical with IEC

61672-1 : 2013


technology equipment Radio disturbance characteristics Limits and methods of

measurement

IS 6873(Part 7):2012 Limits and

methods of measurements of Radio

disturbance characteristics Part 7

Information technology equipment

(first revision)

Identical





International Standard Title

ISO/IEC Guide 98-3 Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM: 1995)

ISO/IEC Guide 98-4:2012 Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment

Only the English language text in the International Standard has been retained while adopting it

in this Indian Standard and as such the page numbers are not the same as in the IEC Publication.






IEC 60065 : 2014

/ 1

Indian Standard

AUDIO/VIDEO, INFORMATION AND COMMUNICATION

TECHNOLOGY EQUIPMENT PART 1 SAFETY REQUIREMENTS

ICS 33.160.01; 35.020



NEW DELHI 110002

2015 Price Group

Audio. Video and Multimedia Systems and Equipments Sectional Committee. LITD 07

NATIONAL FOREWORD

This Indian Standard which is identical with IEC 62368-1 : 2014 'Audio, video and similar

electronic apparatus - Safety requirements' issued by the International Electrotechnical

Commission (IEC) was adopted by the Bureau of Indian Standards on the recommendation of the

Audio, Video and Multimedia Systems and Equipments Sectional Committee and approval of

the Electronics and Information Technology Division Council.








respective places, are listed below along with their degree of equivalence for the editions

indicated:

International Standard Corresponding Indian Standard Degree of Equivalence

IEC 60027-1 Letter symbols to

be used in electrical technology Part 1: General

IS 3722 (Parts 1 and 2) : 1983

Letter symbols and signs used in

electrical technology

Technically

Equivalent

IEC 60065, Audio, video and

similar electronic apparatus Safety requirements

IS 616 : 2010 Audio, Video and

Similar Electronic Apparatus -

Safety Requirements

Identical with IEC

60065 : 2005

IEC 60068-2-6, Environmental

testing Part 2-6: Tests Test Fc: Vibration (sinusoidal)

IS 9001 : Part 13 : 1981 Guidance

for environmental testing - Part 13 :

Vibration (sinusoidal) test

Technically

Equivalent

IEC 60068-2-78, Environmental

testing Part 2-78: Tests Test Cab: Damp heat, steady state

IS 9000 (Part 4) : 2008 Basic

environmental testing procedures

for electronic and electrical items:

Part 4 Damp heat (steady state)

(first revision)

Identical with IEC

60068-2-78 : 2001

IEC/TR 60083, Plugs and

socket-outlets for domestic and

similar general use standardized

in member countries of IEC

IS 1293 : 2005 Plugs and socket-

outlets of rated voltage up to and

including 250 volts and rated

current up to and including 16

Technically

Equivalent

amperes specification IEC 60085, Electrical insulation

Thermal evaluation and designation

IS 1271 : 2012 Electrical

Insulation-thermal evaluation and

designation (second revision)

Identical with IEC

60085 : 2007

IEC 60086-4 Primary batteries Part 4: Safety of lithium batteries

IS 6303 (Part 4) : 2013 Primary

batteries Part 4: Safety of lithium batteries (second revision)

Identical with IEC

60086-4 : 2007

IEC 60107-1 : 1997 Methods of

measurement on receivers for

television broadcast transmissions Part 1 : General considerations Measurements at radio and video frequencies

IS 4545(Part 1) : 2008 Methods of

measurement on receivers for

television broadcast transmissions Part 1 : General considerations

(second revision)

Technically Equivalent

IEC 60112 Method for the

determination of the proof and

the comparative tracking indices

of solid insulating materials

IS 2824 : 2007 Method for

determining of the proof and the

comparative tracking indices of

solid insulating materials

(second revision)

Identical with IEC

60112 : 2003

IEC 60127 (all parts) Miniature

fuses IS/IEC 60127 (All Parts) Miniature

fuses (first revision)

Identical

IEC 60227-1, Polyvinyl chloride

insulated cables of rated voltages

up to and including 450/750 V Part 1: General requirements

IS 694 : 2010 Polyvinyl Chloride

insulated unsheathed and sheathed

cables/cords with rigid and flexible

conductor for rated voltages up to

and including 450/750 V Technically Equivalent IEC 60227-2:2003, Polyvinyl

chloride insulated cables of rated

voltages up to and including 450/750 V Part 2: Test methods

IEC 60245-1, Rubber insulated

cables Rated voltages up to and including 450/750 V Part 1: General requirements

IS 9968 (Part 1) : 1998 Elastomer

insulated cables : Part 1 For

working voltages upto and

including 1100 V (first revision)

IS 9968 (Part 2) : 2002 Elastomer

insulated cables : Part 1 For

working voltages from 3.3 kV up to

and including 3 kV(first revision)


IEC 60309 (all parts), Plugs,

socket-outlets and couplers for

industrial purposes

lS/lEC 60309-1:2002 Plugs,

socketoutlets and couplers for IEC 60309-1 (1999)

industrial purposes Part 1 : General requirements

lS/lEC 60309-2:2002 Plugs,

socketoutlets and couplers for

industrial purposes Part 2: Dimensional interchangeability

requirements for pin and contact-

tube accessories

IEC 60309-2 (1999)

IEC 60317 (all parts),

Specifications for particular

types of winding wires

IS 13730(various parts)

Specifications for particular types of winding wires

Identical

IEC 60317-43 Specifications for

particular types of winding wires

Part 43: Aromatic polyimide type wrapped round copper wire,

class 240

IS 13730(Part 43) : 2013

Specifications for particular types

of winding wires Part 43: Aromatic polyimide type wrapped

round copper wire, class 240

(first revision)

Identical with IEC

60317-43 : 2010

IEC 60320 (All parts) Appliance

couplers for household and

similar general purposes

lS/lEC 60320 (All parts) Appliance

couplers for household and similar

general purposes Identical

IEC 60320-1 Appliance couplers

for household and similar

general purposes Part 1: General requirements

IS/IEC 60320 (Part 1) : 2001

Appliance couplers for household

and similar general purposes Part 1: General requirements

Identical with IEC

60320-1 : 2001

EC 60320-2-2, Appliance

couplers for household and

similar general purposes Part 2-2: Interconnection couplers for

household and similar equipment

lS/lEC 60320-2-2:1998 Appliance

couplers for household and similar

general purposes Part 2-2: Interconnection couplers for

household and similar equipment

IEC 60320-2-2:1998

IEC 60384-14:2005 Fixed

capacitors for use in electronic

equipment Part 14: Sectional specification: Fixed capacitors

for electromagnetic interference

suppression and connection to

the supply mains

IS QC 302400 : 1994 Fixed

capacitors for use in electronic

equipment Part 14 : sectional

specification : Fixed capacitors for

electromagnetic interference

suppression and connection to the

supply mains supply mains

Identical with IEC Pub

38414/QC 302400

(1993-07)

IEC 60417 Graphical symbols

for use on equipment

IS 2032 (All Parts) Graphical

symbols used in electrotechnology Technically Equivalent

IEC 60529, Degrees of

protection provided by

enclosures (IP Code)

IS/IEC 60529:2001 Degrees of

protection provided by enclosures

(IP Code) (superseding IS 12063)

Identical with IEC

60529 : 2001

IEC 60664-1:2007 Insulation

coordination for equipment

within low-voltage systems Part 1: Principles, requirements

and tests

IS 15382 ( Part 1) : 2014 Insulation

coordination for equipment within

low-voltage systems : Part 1

Principles, requirements and tests

(first revision)

Identical with IEC

60664-1 : 2007

IEC 60664-3 Insulation

coordination for equipment

within low-voltage systems Part 3: Use of coating, potting or

moulding for protection against

pollution

IS 15382(Part 3) : 2006 Insulation

coordination for equipment within

low-voltage systems Part 3 Use of

coating, potting or moulding for

protection against pollution

Identical with IEC

60664-3 : 2003

IEC 60691:2002 Thermal links Requirements and application

guide

IS/IEC Pub 691 : 1993 Thermal

links - Requirements and

application guide

Identical with IEC Pub

691 : 1993

IEC 60695-11-5:2004 Fire

hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangement

and guidance

IS 11000 (Part 2/Sec 2) : 2008 Fire

hazard testing - Part 11-5: Test

flames - Needle-flame test method -

Apparatus confirmatory test

arrangement and guidance

(first revision)

Identical with IEC

60695-11-5:2004

IEC 60730 (all parts), Automatic

electrical controls for household

and similar use

IS 60730(Part 1):1999 Automatic


and similar use: Part 1 General

requirements

Identical with IEC

60730-1 : 1999

IEC 60730-1:2010, Automatic


and similar use Part 1General requirements

IS/IEC 60730-1 : 1999 Automatic

electric controls for household and

similar use Part 1 General

requirements

Identical with IEC

60730 : 1999

IEC 60738-1:2009,

Thermistors Directly heated positive temperature

coefficient Part 1: Generic specification

IS 11534(Part 1):1985 Directly

heated positive step function

temperature co-efficient

thermistors: Part 1 General

requirements and methods of tests

Technically equivalent

IEC 60747-5-5:2007

Semiconductor devices Discrete devices Part 5-5 Optoelectronic devices Photocouplers

IS 14901 (Part 5): 2004

Semiconductor devices Discrete devices and integrated circuits Part

5 Optoelectronic devices

Identical with IEC

60747-5 : 1992

http://10.53.100.14/php/BIS/ShowDocument.php?row=2654

IEC 60825-2:2004, Safety of

laser products Part 2: Safety of optical fibre communication systems (OFCS)

IS 14624 (Part 2) : 2012 Safety of

laser products Part 2: Safety of optical fibre communication

systems (OFCS) (first revision)

IEC 60825-2 : 2005

IEC 60851-3:2009 Winding

wires Test methods Part 3: Mechanical properties

IS 13778 : Part 3 : 2012 Winding

wires - Test methods Part 3

Mechnical Properties

Identical

IEC 60851-5:2008 Winding

wires Test methods Part 5: Electrical properties

IS 13778 (Part 5) : 2012 Winding

Wires Test Methods Part 5 Electrical Properties

Identical

IEC 60851-6:1996, Winding

wires Test methods Part 6: Thermal properties

IS 13778 (Part 6): 2011 Winding

Wires - Test Methods : Part 6

Thermal properties

Identical with IEC

60851-6 : 1996

IEC 60906-1, IEC system of

plugs and socket-outlets for

household and similar purposes Part 1: Plugs and socket-outlets

16 A 250 V a.c. IEC 60906-2, IEC system of

plugs and socket-outlets for

household and similar purposes Part 2: Plugs and socket-outlets

15 A 125 V a.c.

IS 1293 : 2005 Plugs and socket-

outlets of rated voltage up to and

including 250 volts and rated

current up to and including 16

amperes Specification (third revision)


IEC 60947-1, Low-voltage

switchgear and controlgear Part 1: General rules

IS/IEC 60947-1 : 2007 Low-

voltage switchgear and controlgear

Part 1: General rules IEC 60947-1 : 2007

IEC 60950-1:2005, Information

technology equipment Safety Part 1: General requirements

IS 13252 : Part 1:2010 Information

Technology Equipment Safety Part 1 General Requirements

Identical

IEC 60950-22:2005, Information

technology equipment Safety Part 22: Equipment to be installed outdoors

IS 13252 (Part 22) : 2014

Information technology equipment

Safety Part 22: Equipment to be installed outdoors

IEC 60950-22 : 2005

IEC 60950-23, Information

technology equipment Safety Part 23: Large data storage equipment

IS 13252 (Part 23) : 2014

Information technology equipment Safety Part 23: Large data storage equipment

IEC 60950-23 : 2005

IEC 60990:1999, Methods of

measurement of touch current

and protective conductor current

lS/lEC 60990:1999 Methods of

measurement of touch current and

protective conductor current

Identical with IEC

60990 : 1999

IEC 61051-1, Varistors for use in

electronic equipment Part 1: Generic specification

IS QC 420000 : 1994 Varistors for

Use in Electronic Equipment -

Generic Specification

Identical with IEC QC

420000 : 1991

IEC 61051-2:1991 Varistors for

use in electronic equipment Part 2: Sectional specification for

surge suppression varistors

IS QC 420100 : 1994 Varistors for

use in electronic equipment Sectional specification for surge

suppression varistors

Identical with IEC QC

420100 : 1991

IEC 61056-1, General purpose

lead-acid batteries (valve-

regulated types) Part 1: General requirements, functional

characteristics Methods of test

IS 16220 (Part 1) : 2015 General

purpose lead-acid batteries (valve-

regulated types) Part 1: General requirements, functional

characteristics Methods of test

IEC 61056-1 : 2012

IEC 61058-1:2008, Switches for

appliances Part 1: General requirements

IS/IEC 61058-1:2000 Switches for

appliances : Part 1 General

requirements

Identical

IEC 61140:2001, Protection

against electric shock Common aspects for installation and equipment

IS 9409:1980 Classification of

electrical and electronic equipment

with regard to protection against

electric shock


IEC 61558-1:2005 Safety of

power transformers, power

supplies, reactors and

similar products Part 1: General requirements and tests

IS/IEC 61558-1:1997 Safety of

power transformers, power supply

units and similar : Part 1 General

requirements and tests

Identical with IEC

61558-1 : 1997

IEC 61643-11, Low-voltage

surge protective devices Part 11: Surge protective devices connected to low-voltage power

systems Requirements and test methods

DOC.ETD 7(6587)

Low voltage surge protective

devices - Part 11: Surge protective

devices connected to low-voltage

power distribution systems

Identical

IEC 61965:2003, Mechanical

safety of cathode ray tubes

IS/IEC 61965:2003 Mechanical

Safety Of Cathode Ray Tubes Identical with IEC

61965 : 2003

IEC 62133, Secondary cells and

batteries containing alkaline or

other non-acid electrolytes Safety requirements for portable

sealed secondary cells, and for

batteries made from them, for use in portable applications

IS 16046 : 2012 Secondary Cells

and Batteries containing Alkaline

or other non-acid Electrolytes -

Safety Requirements for Portable

Sealed Secondary Cells, and for

Batteries made from them, for use

in portable Applications

Identical with IEC

62133 : 2002

IEC 62471:2006

Photobiological safety of lamps

and lamp systems

IS 16108:2012 Photobiological

Safety of lamps and lamp Systems Identical

ISO 178, Plastics Determination of flexural

properties

IS 3360 ( Part S/Set 7 ) : 1996

Plastics - Determination of flexural

properties

IS0 178 : 1993

ISO 179-1, Plastics IS 13360 ( Part S/Set 5 ) : 1996 IS0 179 ,: 1993

http://10.53.100.14/php/BIS/ShowDocument.php?row=16773

Determination of Charpy impact

properties Part 1: Non-instrumented impact test

Plastics - Determination of charpy impact strength

ISO 180, Plastics Determination of Izod impact

strength

IS 13360 (Part 5/Sec 4) : 2013

Plastics Determination of Izod impact strength

ISO 180 : 2000

ISO 306, Plastics Thermoplastic materials Determination of Vicat softening

temperature (VST)

IS 13360 (Part 6/Set 1) : 1999

Plastics Methods of testing : Part 6 Thermal properties, Section 1

Determination of vicat softening

temperature of thermoplastic

materials (first revision)

Identical with ISO 306 :

1994

ISO 527 (all parts), Plastics Determination of tensile

properties

IS 13360 ( Part 5 ) : 1996 Plastics -

Determination of tensile properties

- General principles (All sections)

IS0 527 : 1993

ISO 871, Plastics Determination of ignition

temperature using a hot-air

furnace

IS 13360 (Part 6/See 21 ): 2004

Plastics Determination of ignition temperature using a hot-air

furnace

ISO 871:1996

ISO 3864 (all parts), Graphical

symbols Safety colours and safety signs

IS 9457:2005 Safety colours and

safety signs code of practice (first revision)


ISO 9773, Plastics Determination of burning

behaviour of thin flexible

vertical specimens in

contact with a small-flame

ignition source

IS 13360(Part 6/Sec 23):2006

Plastics - Methods of Testing :part

6 Thermal Properties, Section 23

Determination of Burning

Behaviour of Thin Flexible Vertical

Specimens in Contact With Small-

flame Ignition Source

Identical with ISO 9773

: 1998





International

Standard/ Publication

Title

IEC 60086-5 Primary batteries Part 5: Safety of batteries with aqueous electrolyte IEC 60332-1-2

Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW premixed flame

IEC 60332-1-3 Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable

Procedure for determination of flaming droplets/particles

IEC 60332-2-2 Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or

cable Procedure for diffusion flame IEC 60695-10-2 Fire hazard testing Part 10-2: Abnormal heat Ball pressure test IEC 60695-10-3 Fire hazard testing Part 10-3: Abnormal heat Mould stress relief

distortion test

IEC 60695-11-10 Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical

flame test methods

IEC 60695-11-

20:1999

Fire hazard testing Part 11-20: Test flames 500 W flame test methods

IEC/TS 60695-11-21 Fire hazard testing Part 11-21: Test flames 500 W vertical flame test method for tubular polymeric materials

IEC 60728-11:2005 Cable networks for television signals, sound signals and interactive

services Part 11: Safety IEC 60825-1:2007 Safety of laser products Part 1: Equipment classification and

requirements

IEC 60896-11 Stationary lead-acid batteries Part 11: Vented types General requirements and methods of tests

IEC 60896-21:2004 Stationary lead-acid batteries Part 21: Valve regulated types Methods of test

IEC 60896-22 Stationary lead-acid batteries Part 22: Valve regulated types Requirements

IEC 60998-1 Connecting devices for low-voltage circuits for household and similar

purposes Part 1: General requirements IEC 60999-1 Connecting devices Electrical copper conductors Safety

requirements for screw-type and screwless-type clamping units Part 1: General requirements and particular requirements for clamping units for

conductors from 0,2 mm2 up to 35 mm2 (included)

IEC 60999-2 Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units Part 2: Particular requirements for clamping units for conductors above 35

mm2 up to 300 mm2 (included)

IEC 61056-2 General purpose lead-acid batteries (valve-regulated types) Part 2: Dimensions, terminals and marking

IEC/TS 61201:2007 Use of conventional touch voltage limits Application guide IEC 61204-7 Low-voltage power supplies, d.c. output Part 7: Safety requirements

IEC 61293 Marking of electrical equipment with ratings related to electrical supply

Safety requirements IEC 61427 Secondary cells and batteries for photovoltaic energy systems (PVES)

General requirements and methods of test

IEC/TS 61430 Secondary cells and batteries Test methods for checking the performance of devices designed for reducing explosion hazards Lead-acid starter batteries

IEC 61434 Secondary cells and batteries containing alkaline or other non-acid

electrolytes Guide to designation of current in alkaline secondary cell and battery standards

IEC 61558-2-16 Safety of transformers, reactors, power supply units and similar products

for voltages up to 1 100 V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode

power supply units1

IEC 61810-1:2008 Electromechanical elementary relays Part 1: General requirements IEC 61959 Secondary cells and batteries containing alkaline or other non-acid

electrolytes Mechanical tests for sealed portable secondary cells and batteries

IEC 61984 Connectors Safety requirements and tests IEC 62281 Safety of primary and secondary lithium cells and batteries during

transport

IEC 62485-2 Safety requirements for secondary batteries and battery installations Part 2: Stationary batteries

ISO 3864-2 Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels

ISO 4892-1 Plastics Methods of exposure to laboratory light sources Part 1: General guidance

ISO 4892-2:2006 Plastics Methods of exposure to laboratory light sources Part 2: Xenonarc lamps

ISO 4892-4 Plastics Methods of exposure to laboratory light sources Part 4: Open-flame carbon-arc lamps

ISO 7000 Graphical symbols for use on equipment Index and synopsis, available from

ISO 7010 Graphical symbols Safety colours and safety signs Safety signs used in

workplaces and public areas

ISO 8256 Plastics Determination of tensile-impact strength ISO 9772 Cellular plastics Determination of horizontal burning characteristics of

small specimens subjected to a small flame

EN 50332-1 Sound system equipment: Headphones and earphones associated with

portable audio equipment Maximum sound pressure level measurement methodology and limit considerations Part 1: General method for "one package equipment

EN 50332-2 Sound system equipment: Headphones and earphones associated with

portable audio equipment Maximum sound pressure level measurement methodology and limit considerations Part 2: Matching of sets with headphones if either or both are offered separately





- 2: - ( )Indian Standard ( )Indian Standard 2 ( )Indian Standard , 10 ( )Indian StandardIndian Standard

WIDE CIRULATION - Bureau of Indian Standards3596-3604)_30092015.pdf · WIDE CIRULATION DOCUMENT...

Documents

Transcript of WIDE CIRULATION - Bureau of Indian Standards3596-3604)_30092015.pdf · WIDE CIRULATION DOCUMENT...