Wi-Fi Expansion Module Mounting Instructions … · Ì Kleben Sie den Sticker mit der Aufschrift...

4
Wi-Fi Expansion Module Mounting Instructions SG/XG 135w Rev. 3, SD-RED 20/60

Transcript of Wi-Fi Expansion Module Mounting Instructions … · Ì Kleben Sie den Sticker mit der Aufschrift...

Page 1: Wi-Fi Expansion Module Mounting Instructions … · Ì Kleben Sie den Sticker mit der Aufschrift "Contains FCC ID: 2ACTO-7922DMC" auf den Gehäuseboden des Geräts Einbau des Wi-Fi

Wi-Fi Expansion Module Mounting InstructionsSG/XG 135w Rev. 3, SD-RED 20/60

Page 2: Wi-Fi Expansion Module Mounting Instructions … · Ì Kleben Sie den Sticker mit der Aufschrift "Contains FCC ID: 2ACTO-7922DMC" auf den Gehäuseboden des Geräts Einbau des Wi-Fi

2

Please note Ì Before installing/removing the expansion

module please make sure that the appliance is powered off and power cables are removed

Ì The Wi-Fi Expansion module is only supported on the following models:

� SG/XG 135w rev.3, SD-RED 20/60

Ì Put the sticker that reads 'Contains FCC ID: 2ACTO-7922DMC' at the bottom of the appliance enclosure

Wi-Fi Expansion Module Mounting Instructions

Mounting the Wi-Fi Expansion module1. Attach the antennas shipped with the expansion

module to the connectors at the back of the module

2. Unscrew and remove the metal plate from the expansion slot

3. Insert the Wi-Fi Expansion module into the slot

4. Tighten the screws of the module

2.1. 3. 4.

SG/XG 135w Rev. 3, SD-RED 20/60

Page 3: Wi-Fi Expansion Module Mounting Instructions … · Ì Kleben Sie den Sticker mit der Aufschrift "Contains FCC ID: 2ACTO-7922DMC" auf den Gehäuseboden des Geräts Einbau des Wi-Fi

3

Wi-Fi Expansion-Modul Montage Anleitung

Bitte beachten Ì Stellen Sie bitte sicher, dass die Appliance

ausgeschaltet ist und sämtliche Stromkabel entfernt sind bevor Sie mit der Installation bzw. Entfernung des Wi-Fi Expansion-Moduls beginnen

Ì DasWifi Expansion-Modul wird nur von folgenden Modellen unterstützt:

� SG/XG 135w rev.3, SD-RED 20/60

Ì Kleben Sie den Sticker mit der Aufschrift "Contains FCC ID: 2ACTO-7922DMC" auf den Gehäuseboden des Geräts

Einbau des Wi-Fi Expansion-Moduls1. Befestigen Sie die mitgelieferten Antennen

an der Rückseite des Expansion-Moduls

2. Lösen Sie die Schrauben von der Abdeckung des Einschubslots und entfernen Sie die Metallplatte

3. Schieben Sie das Expansion-Modul in die Öffnung

4. Ziehen Sie die Schrauben des Moduls fest

2.1. 3. 4.

SG/XG 135w Rev. 3, SD-RED 20/60

Page 4: Wi-Fi Expansion Module Mounting Instructions … · Ì Kleben Sie den Sticker mit der Aufschrift "Contains FCC ID: 2ACTO-7922DMC" auf den Gehäuseboden des Geräts Einbau des Wi-Fi

Wi-Fi Expansion Module Mounting Instructions

© Copyright 2019. Sophos Ltd. All rights reserved.

Registered in England and Wales No. 2096520,

The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, UK

Sophos is the registered trademark of Sophos Ltd. All other product and company

names mentioned are trademarks or registered trademarks of their respective owners.

United Kingdom and Worldwide SalesTel: +44 (0)8447 671131Email: [email protected]

North American SalesToll Free: 1-866-866-2802Email: [email protected]

Australia and New Zealand SalesTel: +61 2 9409 9100Email: [email protected]

19-08-28 (DD)

Sales DACH(Deutschland, Österreich, Schweiz) Tel.: +49 (0) 611 585 8-0Tel.: +49 (0) 721 255 16-0 E-Mail: [email protected]

Asia SalesTel: +65 62244168Email: [email protected]