Why Does Glass Break?
Transcript of Why Does Glass Break?
![Page 1: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/1.jpg)
US-China Winter SchoolNew Functionalities in Glass
Why Does Glass Break?Some considerations of the mechanical
properties of glass
Richard K. Brow
Missouri University of Science & Technology
Department of Materials Science & Engineering
2010 US-ChinaWinter School
Richard K. [email protected]
IMI-1
![Page 2: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/2.jpg)
If glass was 100X stronger, what *new* applications would result?
Richard K. [email protected]
IMI-22010 US-ChinaWinter School
![Page 3: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/3.jpg)
New applications will benefit from stronger glass…..
Richard K. [email protected]
IMI-32010 US-ChinaWinter School
![Page 4: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/4.jpg)
Apple Store, 5th Ave., NYC Glasgow, Scotland
Richard K. [email protected]
IMI-42010 US-ChinaWinter School
![Page 6: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/6.jpg)
Emilio Spinosa, O-I, Vancouver, June 2009
Richard K. [email protected]
IMI-62010 US-ChinaWinter School
![Page 7: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/7.jpg)
Strong glass comes in handy for other applications
Richard K. [email protected]
IMI-72010 US-ChinaWinter School
![Page 8: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/8.jpg)
Our Outline
1. Background Information• Elastic modulus• Fracture mechanics and strength• Fatigue• Strengthening
2. Two-point bend studies of pristine glass
Richard K. [email protected]
IMI-82010 US-ChinaWinter School
![Page 9: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/9.jpg)
Some useful references:
• A. Varshneya, “Fundamentals of Inorganic Glasses”, Society of Glass Technology (2006)- chap. 18
• “Elastic Properties and Short-to Medium-Range Order in Glasses”, Tanguy Rouxel, J. Am. Ceram. Soc., 90 [10] 3019–3039 (2007)
• “Environmentally Enhanced Fracture of Glass: A Historical Perspective,” S. W. Frieman, S.M. Weiderhorn, and J.J. Mecholsky, J. Am. Ceram. Soc. 92[7] 1371-1382 (2009)
• M. Ciccotti, “Stress-corrosion mechanisms in silicate glasses,” J. Phys. D: Appl. Phys. 42, 214006 (2009).
• C. R. Kurkjian, P. K. Gupta, R. K. Brow, and N. Lower,” The intrinsic strength and fatigue of oxide glasses’, J. Noncryst. Solids, 316, 114 (2003).
Richard K. [email protected]
IMI-92010 US-ChinaWinter School
![Page 10: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/10.jpg)
Richard K. [email protected]
IMI-102010 US-ChinaWinter School
Can we connect mechanical performance to the molecular structure of glass?
E
U
r
r0
U0
![Page 11: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/11.jpg)
Elastic Modulus
Definitions?Why should we care about modulus?
Richard K. [email protected]
IMI-112010 US-ChinaWinter School
![Page 12: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/12.jpg)
Elastic Modulus- resistance to deflection
xx
E
Why is the elastic modulus of a glass important?• Stiffer hard-drive disks (minimize deflection at high
rpm’s)• Stiffer glass-fiber reinforces composites (larger wind-
turbine blades)• Reduce the thickness (and weight) of architectural
glass)• Increase the stiffness of glass-bearing structures
(buildings, bio-glass scaffolds, etc.)• Design glass or glass-ceramic matrices
for aerospace applications
x
y, z
Poisson‟s Ratio
Richard K. [email protected]
IMI-122010 US-ChinaWinter School
![Page 13: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/13.jpg)
Elastic Modulus Is Related To The Strength of Nearest Neighbor Bonds
U
r
Force = F = - dU/dr
Stiffness = S0 = (dU2/dr2) r = r0
Elastic Modulus = E = S / r0
r0F
rr0
Elastic Modulus: Pascals = J/m3
a measure of the volume density
of strain energy (E≈U0/V0)
U0
0
0
2
2
0
90
UV
mn
V
UVK
V
Bulk Modulus:
Richard K. [email protected]
IMI-132010 US-ChinaWinter School
![Page 14: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/14.jpg)
0
0
2
2
0
90
UV
mn
V
UVK
V
From atomistic to continuum properties:
Multi-component glasses:
)()()(
//
000
0
0
yxfffai
iiiaii
BAHBHyAHxH
MfHfV
U
i: density
fi: molar fraction of ith component
Mi: molar mass of ith component
Hai: enthalpy of ith component (Born-Haber cycle)
Richard K. [email protected]
IMI-142010 US-ChinaWinter School
![Page 15: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/15.jpg)
E and Tg are related within a composition class
Rouxel, J. Am. Ceram. Soc., 90 [10] 3019–3039 (2007)
Richard K. [email protected]
IMI-152010 US-ChinaWinter School
![Page 16: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/16.jpg)
More cross-links:
greater E
Rouxel, J. Am. Ceram. Soc., 90 [10] 3019–3039 (2007)
Richard K. [email protected]
IMI-162010 US-ChinaWinter School
![Page 17: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/17.jpg)
Poisson‟s ratio appears to be sensitive to structure: packing
density and „network dimensionality‟
Richard K. [email protected]
IMI-172010 US-ChinaWinter School
![Page 18: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/18.jpg)
Richard K. [email protected]
IMI-182010 US-ChinaWinter SchoolRouxel, J. Am. Ceram. Soc., 90 [10] 3019–3039 (2007)
![Page 20: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/20.jpg)
The temperature-dependence of the Poisson‟s ratio may
indicate changes in structure through the glass transition
2010 IMIRichard K. [email protected]
IMI-20Rouxel, J. Am. Ceram. Soc., 90 [10] 3019–3039 (2007)
![Page 21: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/21.jpg)
Summary: Elasticity
•There is a limited correlation between E and Tg within
compositional series, but not necessarily between
compositional types
•High elastic moduli are favored by structural disorder and
atomic packing seems to be more important than bond
strength
•Poisson‟s ratio ( ) correlates with atomic packing density
and with network dimensionality (polymerization)
•The temperature dependence of elastic properties above
Tg may be related to “fragile” and “strong” viscosity
behavior.
Richard K. [email protected]
IMI-212010 US-ChinaWinter School
![Page 22: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/22.jpg)
Glass Strength
Richard K. [email protected]
IMI-22
What factors determine the strength of glass?
2010 US-ChinaWinter School
![Page 23: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/23.jpg)
Theoretical Strength Can Be Estimated From the Potential Energy Curve (Orowan)
2 f = m sin( x/ ) dx
= m / ( )
a0
m = E / a0
m = [ f E / a0 ]1/2
If E = 70 GPa, f = 3.5 J/m2
and a0 = 0.2nm, then
m = 35 GPa !
Richard K. [email protected]
IMI-232010 US-ChinaWinter School
![Page 24: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/24.jpg)
How does the addition of Na2O affect the Young’s modulus and fracture surface energy of silica glass? Consider what Prof. Pantano discussed the other day….
Richard K. [email protected]
IMI-242010 US-ChinaWinter School
![Page 25: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/25.jpg)
Practical strengths are significantly less than
the theoretical strengths:
Common glass products 14-70 MPa
Freshly drawn glass rods 70-140 MPa
Abraded glass rods 14-35 MPa
Wet, scored glass rods 3-7 MPa
Armored glass 350-500 MPa
Handled glass fibers 350-700 MPa
Freshly drawn glass fibers 700-2100 MPa
Most metals, including steels 140-350 MPa
Richard K. [email protected]
IMI-252010 US-ChinaWinter School
![Page 26: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/26.jpg)
C. E. Inglis (1913): flaws acted as stress concentratorsA.A Griffith (1921): critical flaws determine strength
Stress enhancement by flaws
with length 2c and radius :
yy ≈ 2 a (c/ )1/2
Richard K. [email protected]
IMI-26
Calculated strength with
critical flaw c*:
f = [2 f E / c*] 1/2
If E = 70 GPa, and f = 3.5 J/m2
Then a crack of 100 microns will
result in a failure stress of ≈ 25 MPa
2010 US-ChinaWinter School
![Page 27: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/27.jpg)
Fracture mechanics allow the evaluation of stresses in
the vicinity of a propagating crack
ij = [K / (2 r)1/2] fij ( )
KIc = a ( c)1/2
Fracture criterion when
stress intensity exceeds
the strain energy release rate (depends on E, f)
Richard K. [email protected]
IMI-272010 US-ChinaWinter School
![Page 28: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/28.jpg)
Cathodoluminescence measurements of stress distributions around crack tips
(Pezzotti and Leto, 2007)
Richard K. [email protected]
IMI-282010 US-ChinaWinter School
![Page 29: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/29.jpg)
P, p
rob
ab
ility
de
nsity
, applied stress
m
d
, applied stressPF, cum
ula
tive failu
re p
rob.
1.0
m2
m1
Note: same „average‟
fracture strength, but
m1<m2 (broader distri-
bution of strengths).
ln
lnln
(1-P
F)-
1
m
An aside: Weibull Statistics
2
2
2
)(exp
2
1
dd
Pm
m
FP
0
exp1
0lnln1lnln mP
F
Richard K. [email protected]
IMI-292010 US-ChinaWinter School
![Page 30: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/30.jpg)
Smith and Michalske, 1992
Room temperature tensile tests of pristine silica fibers
drawn and tested in vacuum- bimodal distribution
14GPa
9GPa
Richard K. [email protected]
IMI-302010 US-ChinaWinter School
![Page 31: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/31.jpg)
Richard K. [email protected]
IMI-31
The Ultimate Strength of Glass Silica Nanowires, G. Brambilla and DN Payne, Nano
Letters, 9[2] 831 (2009)
Flame-attenuation of optical fibers
Fiber diameter (nm)
Failu
re s
trength
(G
Pa)
2010 US-ChinaWinter School
![Page 32: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/32.jpg)
E-glass fibers (tensile tests, in air)
Lower soak temperatures
lead to bimodal strength
distributions
Cameron, 1968
Richard K. [email protected]
IMI-322010 US-ChinaWinter School
![Page 33: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/33.jpg)
Gulati, et al., Ceramic Bulletin,
83[5] 14, 2004
Concentric ring tests,
abraded Corning glass 1737,
two different thicknesses.
Richard K. [email protected]
IMI-332010 US-ChinaWinter School
![Page 34: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/34.jpg)
Baikova, et al. Glass Phys. Chem., 21[2] (1995) 115.
E
Hv
LN
RT
K/Al-metaphosphate glasses
Mechanical properties depend on glass structure
Richard K. [email protected]
IMI-342010 US-ChinaWinter School
![Page 36: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/36.jpg)
MD Simulations of fracture
reveal the development of
cavities that coalesce to
form the failure site
Pedone et al., 2008
Richard K. [email protected]
IMI-362010 US-ChinaWinter School
![Page 37: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/37.jpg)
Quenched and annealed soda-lime glasses at 5GPa tension
S. Ito and T. Taniguchi, JNCS (2004)
Richard K. [email protected]
IMI-372010 US-ChinaWinter School
![Page 38: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/38.jpg)
There may be experimental evidence for cavitation near
the tips of slow-moving cracks
Aluminosilicate glass, 10-11 m/s, 45% RH, AFM Images
Formation of „nano-cavities‟ interpreted as evidence for „nano-
ductile‟ fracture of glass!
Richard K. [email protected]
IMI-382010 US-ChinaWinter School
Célarié, et al., PRL (2003)
![Page 39: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/39.jpg)
„Nano-ductility‟ interpretation is not universal
„Post-mortem‟ AFM
analyses of the opposing
fracture surfaces show no
evidence for the formation
of nano-cavities
Guin and Wiederhorn, PRL (2004)
Note the relatively rough surface
Richard K. [email protected]
IMI-392010 US-ChinaWinter School
![Page 41: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/41.jpg)
http://www.youtube.com/watch?v=r8q-R9ZISac
Richard K. [email protected]
IMI-41
An example of fatigue in glass
2010 US-ChinaWinter School
![Page 42: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/42.jpg)
F la w S iz e (m )
1 e -9 1 e -8 1 e -7 1 e -6 1 e -5 1 e -4
Fa
ilu
re S
tre
ng
th (
MP
a)
1
1 0
1 0 0
1 0 0 0
1 0 0 0 0
In h e re n t
F la w s
S tru c tu ra l
F la w s
F a b r i-
c a t io n
-s c o p ic
D a m a g e
V is ib le
D a m a g e
P r is t in e , A s -D ra w n
P r is t in e , A n n e a le d
F o rm e d G la s s
U s e d G la s s
D a m a g e d
G la s s
S ta t icF a t ig u e
E ffe c t
In s ta n ta n e o u s S tre n g thE n d u ra n c e L imit
After Mould (1967)
Richard K. [email protected]
IMI-422010 US-ChinaWinter School
![Page 43: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/43.jpg)
Stress Corrosion: source for static fatigue- the
reduction in strength with time
Richard K. [email protected]
IMI-432010 US-ChinaWinter School
![Page 44: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/44.jpg)
Fatigue data on silica fibers
Room temperature, ambient conditions
Room temperature, vacuum
Liquid nitrogen
Richard K. [email protected]
IMI-442010 US-ChinaWinter School
![Page 45: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/45.jpg)
Note: residual
stresses increase
susceptibility to
static fatigue
Richard K. [email protected]
IMI-462010 US-ChinaWinter School
![Page 46: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/46.jpg)
V=dc/dt
K=P2/f(geometry)
S. W. Freiman, D. R. Mulville and P. W. Mast, J. Mater. Sci., 8[11] 1573 (1973).
c
Double-Cantilever Beam
(DCB) used for controlled
stress intensity and crack
velocity experiments
Richard K. [email protected]
IMI-472010 US-ChinaWinter School
![Page 47: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/47.jpg)
Region I: stress-corrosion
Region II: diffusion-limited
Region III: rapid fracture (KIC)
Region 0: propagation threshold
Richard K. [email protected]
IMI-482010 US-ChinaWinter School
Crack propagation kinetics depend on the stress intensity
![Page 48: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/48.jpg)
Richard K. [email protected]
IMI-49
SM Wiederhorn, JACerS, 50 407 (1967)
Cra
ck v
elo
city (
m/s
)
Stress Intensity Factor, KI (Nm-1/2)
H2O(l)
I
II
III
100%
30%
10%
1.0%
0.2%
0.017%
Water and stress enhance crack growth in glass
Region I: stress-
corrosion
v=AKIn, where n is the
„stress corrosion
susceptibility factor‟
2010 US-ChinaWinter School
![Page 49: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/49.jpg)
Compositional-dependence of v-K behavior in Region I
Different glasses are more or less susceptible to fatigue effects –
We do not understand this compositional dependence!
Richard K. [email protected]
IMI-50
BorosilicateSilica
Soda-Lime
Aluminosilicate
2010 US-ChinaWinter School
![Page 50: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/50.jpg)
Wiederhorn and Bolz, JACerS, 53, 545 (1970)
Temperature-dependence of v-K behavior in Region I
Richard K. [email protected]
IMI-512010 US-ChinaWinter School
![Page 51: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/51.jpg)
Slow crack growth is a thermally activated process
)/exp(0
RTbKEVVI
Chemical rate theory has been used to explain the exponential form of the V –KI curves:
where V0 is a constant, E is the activation energy for the reaction, R is the gas constant, T is the temperature, and b is proportional to the activation volume for the crack growth process, ΔV*.
Wiederhorn, et al., JACerS, 1974
Richard K. [email protected]
IMI-522010 US-ChinaWinter School
![Page 52: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/52.jpg)
Stress-corrosion in silicate glass:
a. Adsorption of a water molecule on a strained siloxane bond at a crack tip;
b. Reaction based on proton and electron transfer;
c. Separation of silanol groups after rupture of the hydrogen bond.
Net result: extension of the crack length by one tetrahedral unit
Richard K. [email protected]
IMI-532010 US-ChinaWinter School
![Page 53: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/53.jpg)
Stress-corrosion in silicate glass:
a. Reactive molecules can donate both protons and electrons to the ruptured siloxane bond;
b. Reactive molecules are small enough to reach the crack tip (<0.5 nm).
Water, ammonia, hydrazine (H2N-NH2), formamide (CH3NO)
Richard K. [email protected]
IMI-542010 US-ChinaWinter School
![Page 54: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/54.jpg)
Lawn et al., JACerS, 68[1] 25 (1985)
•Controlled flaws (Vicker’s indents) in S-L-S•Aging in different environments•Tensile tests in inert conditions (silicone oil)•May be due to stress release- not crack geometry?
Richard K. [email protected]
IMI-552010 US-ChinaWinter School
Other ‘crack-tip chemistries’ lead to strength increasing with time
![Page 55: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/55.jpg)
Change in crack tip geometry due to corrosion: (a) Flaw sharpening for stresses greater than the fatigue limit; (b) Constant flaw sharpness for stresses equal to the fatigue stress; (c) Flaw blunting for stresses below the fatigue limit. .T.-J. Chuang and E.R. Fuller, Jr. “Extended Charles-Hillig Theory for Stress Corrosion Cracking of Glass,” J. Am. Ceram. Soc. 75[3] 540-45 (1992).
W.B. Hillig, “Model of effect of environmental attack on flaw growth kinetics of glass,” Int. J. Fract. 143 219-230 (2007)
Crack-tip sharpness depends on glass structure and corrosion conditions
Richard K. [email protected]
IMI-562010 US-ChinaWinter School
![Page 56: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/56.jpg)
Richard K. [email protected]
IMI-572010 US-ChinaWinter School
AFM detects significant morphological changes around the crack-tip in aged samples
• Formation of alkali-rich regions modeled by Na+-H3O+ inter-diffusion• Alkali depletion from crack-tip region leads to stress-relaxation
• Crack extension threshold
SLS glass, 45% RH Célarié, et al., JNCS (2007)
![Page 57: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/57.jpg)
The ‘corrosion reactions’ at a crack tip are similar to those that occur at glass surfaces
From Prof. Jain:
A clear glass plate is made of soda lime silicate glass by pressing molten gob. It shows
the following undesirable pattern upon washing in a dishwasher. Discuss this problem
with your roommate. Then develop a collaborative research program to characterize and
solve the problem. The proposal should be about 1500 words long.
Richard K. [email protected]
IMI-582010 US-ChinaWinter School
![Page 58: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/58.jpg)
Richard K. [email protected]
IMI-592010 US-ChinaWinter School
Water plays many roles at a crack-tip
1. Chemical attack on strained bonds to extend flaws
2. Water films adsorbed on crack surfaces
3. Capillary condensation at the crack tip
4. Water diffusion into the glass network, changing elastic properties
5. Inter-diffusion with alkali ions, changing pH and attacking glass
![Page 59: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/59.jpg)
Strengthening- What can we do to make glass stronger (or more reliable)?
Richard K. [email protected]
IMI-612010 US-ChinaWinter School
![Page 60: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/60.jpg)
• Polished surfaces
• Surface dealkalization
• Protective coatings
• Relaxation of residual stresses (annealing)
• Reduction of expansion coefficients (thermal shock)
• Thermal tempering
• Chemical tempering
• Modified compositions:
– Increasing elastic modulus and/or surface energy
– Reducing stress-corrosion
– Propagation threshold
– Crack healing
Richard K. [email protected]
IMI-622010 US-ChinaWinter School
![Page 61: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/61.jpg)
Annealed vs. chemically tempered glass
From Jill Glass, Sandia National Labs
Richard K. [email protected]
IMI-632010 US-ChinaWinter School
![Page 62: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/62.jpg)
Two-point bend studies ofthe failure characteristics of silicate glasses
Richard K. [email protected]
IMI-642010 US-ChinaWinter School
![Page 63: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/63.jpg)
We have produced and tested pristine fibers
Box Furnace
Drawing Cage
• “Pristine” 10 cm length fibers• Fiber diameters ~125 mm.• Fibers can be tested immediately.
TNL Tool and Technology, LLC – www.TNLTool.com
Richard K. [email protected]
IMI-652010 US-ChinaWinter School
![Page 64: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/64.jpg)
We have measured failure strains usinga Two-Point Bend technique
• Face plate velocities: 1 – 10,000 mm/sec• Liquid nitrogen, room temp/variable humidity.• Small test volume (25-100mm gauge length). E
dD
d
ff
f
198.1
*M.J. Matthewson, C.R. Kurkjian, S.T.
Gulati, J. Am. Cer. Soc., 69, 815 (1986).
TNL Tool and Technology, LLC – www.TNLTool.com
Richard K. [email protected]
IMI-662010 US-ChinaWinter School
![Page 65: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/65.jpg)
The inert failure strain measurements are reproducible
F a ilu re S tra in (% )
9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0
Cu
mu
lati
ve
Fa
ilu
re P
rob
ab
ilit
y (
%)
1
3
5
1 0
2 0
4 0
6 0
8 0
9 0
9 9
S ilic a
m = 1 0 3
A v g = 1 7 .9 8 %
E -G la s s
m = 1 1 9
A v g = 1 2 .8 1 %
Eight sets of E-glass
fibers, tested in liquid
nitrogen, collected
over two years
Richard K. [email protected]
IMI-672010 US-ChinaWinter School
![Page 66: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/66.jpg)
y = -0.00013x + 12.82
12.2
12.4
12.6
12.8
13.0
13.2
70 90 110 130 150 170 190
Fiber diameter ( m)
Fa
ilu
re s
tra
in (
%)
The inert failure strain measurements are intrinsicCriteria for ‘intrinsic’ failure properties*
•Narrow failure distributions: s(failure) < s(fiber diameter)•Failure property (strength, strain) independent of diameter
*Gupta and Kurkjian, JNCS 351 (2005) 2343.
~180 E-glass fibers/LN2 tests
Richard K. [email protected]
IMI-682010 US-ChinaWinter School
![Page 67: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/67.jpg)
m = 131, 12.09%
m = 142, 6.29%
-5.0
-4.0
-3.0
-2.0
-1.0
0.0
1.0
2.0
1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60
ln(failure strain, %)
ln(ln(1
/1-f
))
E-glass3 C1 P1 LN
E-glass3 C2 P1 LN
E-glass3 C3 P1 LN
E-glass3 C3 P1 RH
m = 113, 12.05%
m = 117, 12.08%
20%RH, 26ºC
LN2
Fibers fail at lower strainsin ambient conditions
Richard K. [email protected]
IMI-692010 US-ChinaWinter School
![Page 68: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/68.jpg)
Fatigue effects can be characterized
RH / Temp. Sensor
Chamber purged with
controlled humidity
Failure Strain (%)
5 5.5 6 6.5 7
Cu
mu
lati
ve
Fai
lure
Pro
bab
ilit
y (
%)
1
3
5
10
20
40
60
80
90
99
4A
24oC, varied RHm
Avg = 181
Weibull Plot of 4A (0.0% B2O3)
Tested at 24 C and
different relative
humidities.
FPV = 4000 m/s
Increasing RH
80%
RH
10%
RH
Richard K. [email protected]
IMI-702010 US-ChinaWinter School
![Page 69: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/69.jpg)
Failure Strain (%)
3 4 5 6 7 8 9 10 12 14 1618
Cu
mu
lati
ve
Fai
lure
Pro
bab
ilit
y (
%)
1
3
5
10
20
40
60
80
90
99
Fresh2 days4 days7 days14 days28 days
4A Aged at
80% RH, 50oC
Tested using:
LN2, 4000 m/s
Aging effects have also been characterized
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
0.0 10.0 20.0 30.0 40.0 50.0
Time (Days)
Fa
ilure
Str
ain
(%
)
Aging of 4A
Aging of 4A2
Aging of 4C (set 1)
Aging of 4C (set 2)
B-free composition
Ca-aluminoborosilicates
Richard K. [email protected]
IMI-712010 US-ChinaWinter School
![Page 70: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/70.jpg)
What might inert 2pb studies tell us aboutthe failure characteristics of silicate glasses?
Richard K. [email protected]
IMI-722010 US-ChinaWinter School
![Page 71: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/71.jpg)
Compositions Studied
• xNa2O * (100-x)SiO2
• x = 0, 7, 10, 15, 20, 25, 30, 35
• xK2O * (100-x)SiO2
• x = 0, 4.5, 7, 10, 15, 20, 25
• 25Na2O * xAl2O3 * (75-x)SiO2
• x = 0, 5, 10, 15, 20, 25, 30, 32.5
• xNa2O * yCaO * (100-x-y)SiO2
– Compositions studied by Ito, et al.
Richard K. [email protected]
IMI-732010 US-ChinaWinter School
![Page 72: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/72.jpg)
Failure Strain (%)
14 15 16 17 18 19 20 21 22 23 24 25
Cu
mu
lati
ve
Fai
lure
Pro
bab
ilit
y (
%)
1
3
5
10
20
40
60
8090
99
15-85NaSi
0-100NaSi
20-80NaSi
25-75NaSi
30-70NaSi
35-75NaSi10-90
NaSi
7-93NaSi
Na-silicate inert failure strains depend on composition
Avg m ~ 259 xNa2O * (100-x)SiO2
Richard K. [email protected]
IMI-742010 US-ChinaWinter School
![Page 73: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/73.jpg)
55.0
60.0
65.0
70.0
75.0
0.00 0.10 0.20 0.30 0.40
Mole Fraction Na2O
Ela
stic M
od
ulu
s (
GP
a)
UMR
Bokin
Takahashi K.
Karapetyan
Livshits
Sodium silicate properties
15.0
17.0
19.0
21.0
23.0
25.0
0.00 0.10 0.20 0.30 0.40
Mole Fraction Na2O
Fai
lure
Str
ain
(%
)
LN4000
Increasing NBO‟s
xNa2O * (1-x)SiO2
Richard K. [email protected]
IMI-752010 US-ChinaWinter School
![Page 74: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/74.jpg)
Na-Al-silicate inert failure strains depend on composition
Failure Strain (%)
12 13 14 15 16 17 18 19 20 21 22
Cu
mu
lati
ve
Fai
lure
Pro
bab
ilit
y (
%)
1
3
5
10
20
40
60
80
90
99
25-5-70NaAlSi
25-10-65NaAlSi
25-75Na-Si
25-25-50NaAlSi
25-15-60NaAlSi
25-20-55NaAlSi
25-30-45NaAlSi
25-32.5-42.5NaAlSi
25Na2O * (x)Al2O3 * (75-x) SiO2
Richard K. [email protected]
IMI-762010 US-ChinaWinter School
![Page 75: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/75.jpg)
55.0
60.0
65.0
70.0
75.0
80.0
85.0
0.00 0.10 0.20 0.30 0.40
Mole Fraction Al2O3
Ela
stic M
odu
lus (
GP
a)
UMR
Livshits
Yoshida
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
0.00 0.10 0.20 0.30Mole Fraction Al2O3
Fai
lure
Str
ain (
%)
Na-Al-silicate properties depend on structure
Greater cross-linking:“stiffer” structure
Fully„cross-linked‟
0.25Na2O * (x)Al2O3
(0.75-x) SiO2
Richard K. [email protected]
IMI-772010 US-ChinaWinter School
![Page 76: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/76.jpg)
12.0
14.0
16.0
18.0
20.0
22.0
24.0
26.0
2.80 3.00 3.20 3.40 3.60 3.80 4.00
Failu
re S
train
, %
Bridging Oxygens/Former
NAS
NS
KS
SLS
Inert failure strain decreases for ‘cross-linked’ structures
Richard K. [email protected]
IMI-782010 US-ChinaWinter School
![Page 77: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/77.jpg)
Failure strain depends on elastic modulus
5.0
10.0
15.0
20.0
25.0
25.0 35.0 45.0 55.0 65.0 75.0 85.0
Elastic Modulus (GPa)
Fa
ilure
Str
ain
, %
NASNSKSNBSLSSilicaCABSTV PanelE-GlassC-0317
Richard K. [email protected]
IMI-792010 US-ChinaWinter School
![Page 78: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/78.jpg)
Do these measurements provide information about the strength of glass?
…depends on what we know aboutthe elastic modulus
Richard K. [email protected]
IMI-802010 US-ChinaWinter School
![Page 79: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/79.jpg)
Bruckner, Strength of Inorg. Glass 1986
Elastic modulus depends on strainE-glass fibers Na/Li-phosphate fibers
Richard K. [email protected]
IMI-812010 US-ChinaWinter School
![Page 80: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/80.jpg)
Strain dependence of modulus has been modeledConverting failure strain to failure stress requires knowledge of Y( ): Gupta and Kurkjian, JNCS 351 (2005) 2343
Y( ) = Y0+Y1 +(Y2/2) 2 ; f = f[(2/3)Y0+(Y1/6) f]
Richard K. [email protected]
IMI-822010 US-ChinaWinter School
![Page 81: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/81.jpg)
Failure strengths can be calculated if Y( ) is known
5.0
10.0
15.0
20.0
25.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
0.0 10.0 20.0 30.0 40.0
Iner
t Fa
ilure
Str
ain
(%
)
Mec
han
ical
Pro
per
ty (
GPa
)
mole % Na2O
stress
Pukh, et al.
strain
Richard K. [email protected]
IMI-832010 US-ChinaWinter School
![Page 82: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/82.jpg)
What role is played by ‘critical flaws’?
• There are no apparent surface heterogeneities.
• If Griffith flaws are responsible for low strengths, they will be in the range of 2-7 nm, depending on the flaw (stress concentrator) geometry.
0
2
4
6
8
10
12
14
16
0 5 10 15
Griffith Flaw Size (nm)
Fa
ilu
re S
tre
ng
th (
GP
a)
.
13GPa -> 1.4 nm flaw
6GPa -> 6.7 nm flaw
2
1
2
c
E
f
Recall processing effects
Richard K. [email protected]
IMI-842010 US-ChinaWinter School
![Page 83: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/83.jpg)
Failure Strain (%)
6 7 8 9 10 11 12 13
Cu
mu
lati
ve
Fai
lure
Pro
bab
ilit
y (
%)
1
3
5
10
20
40
60
80
90
99
Advantex C2P5
2:00 at 1180oC
m = 7
Avg = 10.36%
Advantex C2 P3
2:00 at 1250oC
m = 60
Avg = 12.11%
Advantex C2 P4
2:00 at 1200oC
m = 9
Avg = 10.88%
Advantex C2 P2
12:00 at 1350oC
m = 129
Avg = 12.18%
Advantex Failure Strains
Failure Strain (%)
4 5 6 7 8 9 10 11 12 13
Cum
ula
tive
Fai
lure
Pro
bab
ilit
y (
%)
1
3
5
10
20
40
60
80
90
99
Advantex C2 P11
3:00 at 1350oC
m = 55
Avg = 11.88%
Advantex C2 P8
0:30 at 1350oC
m = 3
Avg = 8.51%
Advantex C2 P2
12:00 at 1350oC
m = 129
Avg = 12.18%
Advantex C2 P9
1:00 at 1350oC
m = 4
Avg = 9.34%
Advantex C2 P10
2:00 at 1350oC
m = 35
Avg = 11.73%
Weibull distributions of fibers drawn after different melt histories. Weibull modulus (m),
average failure strain ( Avg), and melt history are reported for each data set.
Richard K. [email protected]
IMI-852010 US-ChinaWinter School
![Page 84: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/84.jpg)
Some questions related to Prof. Sen‟s lecture:
What type of heterogeneities might account for these
distributions in failure strains?
What techniques could you use to characterize these
heterogeneities?
![Page 85: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/85.jpg)
Richard K. [email protected]
IMI-87
4 .0
5 .0
6 .0
7 .0
8 .0
9 .0
1 0 .0
1 1 .0
1 2 .0
1 3 .0
0 :0 0 2 :0 0 4 :0 0 6 :0 0 8 :0 0 1 0 :0 0 1 2 :0 0 1 4 :0 0 1 6 :0 0 1 8 :0 0 2 0 :0 0 2 2 :0 0 2 4 :0 0 2 6 :0 0 2 8 :0 0
T im e
Fa
ilu
re S
tra
in,
%
1 1 0 0
1 1 5 0
1 2 0 0
1 2 5 0
1 3 0 0
1 3 5 0
Me
ltin
g T
em
pe
ratu
re (
C)
F a ilu re S tra in s
M e lt in g T e m p e ra tu re
T F ~ 1 3 5 0 ºC
T L ~ 1 2 0 0 ºC
T h e rm a l H is to ry
Im p ro v in g
D e g ra d in g
Im p ro v in g
G la s s b e h a v e s
s tra n g e ly a t T L -5 0
Advantex Thermal History Summary
Crystallites form
When the glass was melted at 1350ºC, the failure strain distributions narrow with time.
Failure strain distributions begin to broaden when melts are cooled to TL+50ºC.
2010 US-ChinaWinter School
![Page 87: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/87.jpg)
Inert ‘failure rate’ studies
F a ilu re S tr a in (% )
1 6 .5 1 7 1 7 .5 1 8 1 8 .5
Cu
mu
lati
ve
Fa
ilu
re P
rob
ab
ilit
y (
%)
1
3
5
1 0
2 0
4 0
6 0
8 0
9 0
9 9
In c r e a s in g Vfp
S i l ic a
mA v g
= 1 3 2
5 m /s 1 0 ,0 0 0
m /s
F a ilu re S tr a in (% )
1 6 1 6 .5 1 7 1 7 .5 1 8
Cu
mu
lati
ve
Fa
ilu
re P
rob
ab
ilit
y (
%)
1
3
5
1 0
2 0
4 0
6 0
8 0
9 0
9 9
D e c re a s in g Vfp
1 0 -1 0 -8 0
S L S
mA v g
= 1 8 9
5 m /s4 ,0 0 0 m /s
‘Normal’ Inert Fatigue
Inert Delayed Failure Effect
Richard K. [email protected]
IMI-892010 US-ChinaWinter School
![Page 88: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/88.jpg)
2.8
2.81
2.82
2.83
2.84
2.85
2.86
2.87
2.88
2.89
2.9
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0ln (Vfp)
ln (
failu
re s
train
, %
)
10-10-80 SLS
Silica
n = 1 / (d ln( / d ln(Vfp) ) n = 365
Inert ‘failure rate’ studies
Richard K. [email protected]
IMI-902010 US-ChinaWinter School
![Page 89: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/89.jpg)
The inert delayed failure effect depends on structure
-0.020
0.000
0.020
0.040
0.060
0.080
0.100
2.80 3.00 3.20 3.40 3.60 3.80 4.00
Bridging Oxygens/Former
Inert
Dela
yed F
ailu
re E
ffect
(50-
4000)/
50)
NAS
NS
KS
SLS
Richard K. [email protected]
IMI-912010 US-ChinaWinter School
![Page 90: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/90.jpg)
Failure strain measurements also correlate with crack initiation loads
13
14
15
16
17
18
19
20
21
-0.10 0.00 0.10 0.20 0.30 0.40Mole Fraction Al2O3
Fai
lure
Str
ain
(%
)
0.2
0.5
0.7
1.0
1.2
1.5
1.7
2.0
-0.10 0.00 0.10 0.20 0.30 0.40
Mole Fraction Al2O3
Cra
ck i
nit
iati
on
lo
ad (
N)
Satoshi Yoshida, 2003
0.25Na2O * (x)Al2O3 * (0.75-x) SiO2
More
Brittle
Richard K. [email protected]
IMI-922010 US-ChinaWinter School
![Page 91: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/91.jpg)
Failure strain measurements may provide information about ‘less brittle’ glasses
Setsuro Ito, 2002
Richard K. [email protected]
IMI-932010 US-ChinaWinter School
![Page 92: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/92.jpg)
2/3
4/139.2
a
CPBsBrittlenes
P is applied load, C is crack length, and a is Vickers indentation diagonal length
“Brittleness parameter” has been determined from indentation measurements
Setsuro Ito, 2002
Richard K. [email protected]
IMI-942010 US-ChinaWinter School
![Page 93: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/93.jpg)
Soda-lime silicate glasses exhibit the ‘delayed failure’ effect
Failure Strain (%)
17.5 18 18.5 19 19.5 20 20.5 21
Cu
mula
tive
Fai
lure
Pro
bab
ilit
y (
%)
1
3
5
10
20
40
60
8090
99
20-10-70SLS
mAvg
= 326
15-10-75SLS
mAvg
= 261
15-5-80SLS
mAvg
= 345
Each glass possesses a large IDFE.
Closed symbols4000 mm/sec,Open symbols
50 mm/sec
Richard K. [email protected]
IMI-952010 US-ChinaWinter School
![Page 94: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/94.jpg)
-2.0
-1.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
4.0 5.0 6.0 7.0 8.0 9.0 10.0
Brittleness (Ito)
IDF
E (
Mis
souri S
&T
)
Silica
Soda-lime &borosilicate glasses
‘Brittleness’ and ‘inert delayed failure’may be related
Richard K. [email protected]
IMI-962010 US-ChinaWinter School
![Page 95: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/95.jpg)
Is IDFE related to network relaxation?
Day & Rindone, 1962
NBO motion?
Na diffusion
Richard K. [email protected]
IMI-972010 US-ChinaWinter School
![Page 96: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/96.jpg)
Is there a universal dependence of glass failure characteristics on network structure?
8.0
12.0
16.0
20.0
24.0
35.0 45.0 55.0 65.0 75.0 85.0 95.0 105.0
Young's modulus (GPa)
Fa
ilure
str
ain
, %
NSNASKSSLSSilicaCABSTV PanelE-glassC-0317TiMgAlSi
LN depends on E (IDFE≤0)2. Silica is anomalous
LN depends on network relaxation (IDFE>0)
WOULD ‘INSTANTANEOUS’ FAILURE STRAINS ALL FALL ON A STRAIGHT
LINE??
LN2 tests at 4000 /sec
Richard K. [email protected]
IMI-982010 US-ChinaWinter School
![Page 97: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/97.jpg)
Summary
Inert failure strains are sensitive to the composition/structure of glass fibers.
f increases when NBO’s replace BO’s
f increases when Young’s modulus decreases
Inert failure strains are dependent on the applied stressing rates (Vfp).
Structure with non-bridging oxygens fail at larger strains with slower Vfp.
‘Framework’ structures do not exhibit this ‘inert delayed failure effect’.
Is IDFE due to relaxation of the network? What role is played by the NBO’s?
Richard K. [email protected]
IMI-992010 US-ChinaWinter School
![Page 98: Why Does Glass Break?](https://reader035.fdocuments.in/reader035/viewer/2022062513/586cfbe11a28abd7678b456b/html5/thumbnails/98.jpg)
The NSF/Industry/University Center for Glass Research sponsored the two-point bend studies at Missouri S&T
Nate Lower and Zhongzhi Tang collected the data
Chuck Kurkjian (retired, AT&T) inspired the work
Richard K. [email protected]
IMI-1002010 US-ChinaWinter School