White International Price list

www.whiteint.com.au

PUMP PRICELIST 2011

ENGINEDRIVEN

COMMERCIAL & INDUSTRIAL

DOMESTIC & HOUSEHOLD

POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION

SUBMERSIBLE & DRAINAGE

2 | Pump Price List • Effective 1st May 2011 • List Prices are recommended and Exclude GST WEBSITE: www.whiteint.com.au HOTLINE: 1300 783 601

BRAND DESCRIPTION DISCOUNT CODE

DISCOUNT %

Pumps & Water Pressure Systems DBP

Submersible Borehole Pumps (complete) DSU1

Submersible Borehole (wetends, motors, controls, asccessories) DSU2

Pump Spare Parts DBS

Drainage, Pressure Systems, Pumps & Access., Pool Pumps & Filters, Submersible Drainage Pumps BIA

Engine Powered Products BIE

Hose Reel BHR

Aquatics AQU

Rainsaver Products, Rain Harvesting Controllers RAI

Pressure Tanks FLE

Pumps TES

Motors, Controls & Accessories DSU2

Pumps, Spare Parts & Package Pump Stations ZDP

Control Panels ZCP

Industrial Pumps & Pump Stations ZIP

Lubrication Equipment, Pumps & Accessories PDP

www.dabpumpsaustralia.com.auwww.biancopumpz.com.au

www.biancorainsaver.com.auwww.zenitpumps.com.au

www.globalwatersolutionsaustralia.com.au

YOUR REP IS:

..........................................................................................................MOBILE NO:

..........................................................................................................

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION


http://www.dabpumpsaustralia.com.au

http://www.biancopumpz.com.au

http://biancorainsaver.com.au

http://zenitpumps.com.au

http://globalwatersolutionsaustralia.com.au

Pump Price List • Effective 1st May 2011 • List Prices are recommended and Exclude GST | 3WEBSITE: www.whiteint.com.au HOTLINE: 1300 783 601

DAB - Domestic Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6DAB - Farm & Commercial Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9DAB - Deep Well Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6PRESSURE System MATRIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7DAB - Domestic Pressure Systems & Booster Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8TREVI - Logicstop ‘Loss of Prime Protection’ Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8DAB - VFD Pressure System Pumps & Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9DAB - Active Pressure Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10DAB - Active VFD Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10DAB - Active VFD Pressure Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10DAB - Active VFD Multistage Pressure Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11DAB - Automatic Pressure Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12DAB - VFD Multistage Automatic Pressure System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Pump Controllers – White International, Watertech, Trevi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13TREVI - VFD Pump Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13DAB - Pool Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14DAB - Domestic KP Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15DAB - K Series Centrifugal Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15DAB - Circulators – Hot Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16DAB - Active Sub Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16DAB - Submersible Borehole Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-19TESLA - Borehole Pumps – PSC Motors & Control Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20TESLA - 4” 2 Wire Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20TESLA - Borehole Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20DAB - Submersible Drainage Pumps – Nova, Feka . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21DAB - Under Basin Pump Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22GWS - Pressure Wave, High Pressure Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23GWS - Challenger Tanks, Superflow, C2 Fibreglass Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24ZENIT - BlueBox Pump & Lifting Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Package Pump Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-29 Pump Stations – 250, 900, 1200 & 3000 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Controllers & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28 Auxiliary Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29ZENIT - Blue Series – DRBLUE, BRBLUEP, DGBLUEP, GRBLUEP, APBLUEP . . . . . . . . . . . . . . . . . . . . 30-33ZENIT - DRE, DGE, DRN, DRP, GRN, MAC MO-CHANNEL, AP, Accessories . . . . . . . . . . . . . . . . . . . . 33-36BIANCO - Rainsaver – Rainharvesting Control & Pump Packages . . . . . . . . . . . . . . . . . . . . . . . . 37-40TESLA - Diver Pumps & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41BIANCO - Automatic Pressure Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Pump Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42BIANCO - Submersible Drainage Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-44BIANCO - Pool Pumps, Fliters, Chlorinators, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-46BIANCO - Close Coupled Stainless Steel Motor Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46BIANCO - Hot Water Circulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46BIANCO - Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47BIANCO - Engine Powered Products - NEW Diesel & Generator . . . . . . . . . . . . . . . . . . . . . . . . . 48-50BIANCO Water & Air Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51BIANCO Aquatics – Pumps & Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-55PIUSI – Lubrication Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59ZENIT - NEW Stainless Steel Pumps 61BIANCO - NEW Black Series Pumps 62-63

TABLE OF CONTENTS


Self Priming CentrifugalPumps with excellent suction capacity

DAB PUMPS have been synonymous with high technology, quality and reliability all over the world for more than 30 years. Since 1975 it has been designing and constructing motor-driven pumps within a welldefined scenario: to meet the increasing market demands and not only with the highest quality products but also with an efficient, flexible service. From its first production facility, which is today used as its headquarters, DAB has grown and evolved and at present it employs more than 500 people and occupies 60.000 square metres on which industrial facilities stand, boasting scientific and production departments working on a par with foreign markets. Its six European branches give further confirmation of this, each specialised in a specific production area, established with the purpose of guaranteeing our partners and customers with DAB personnel on site. From October 2006 there is also a new member in DAB family, Qingdao factory in China. The result of this organisational effort is in the numbers: 1,500.000 motor-driven pumps are sold each year, more than 1000 different catalogued models, thousand of satisfied customers that talk about DAB quality far better than how we could in these few lines.

Why Buy a DABJet Pressure System?

• Can lift water up to 9m (excludes KPS range) – enables water to be drawn from more locations• Industrial Quality Pressure Switch – fully adjustable enabling the pump performance to be tailored and

reduces pressure fluctuations• Technopolymer impeller, diffuser, venturi tube and sand guard• Cast Iron or Stainless Steel pump body - corrosion resistant and high strength, ideal for frost conditions

and provides Back Pressure Resistance• Stainless Steel Pressure discs• Carbon/ceramic mechanical seal• External Brass Non Return Valve and Brass Tee gives added strength and makes servicing easier• Pressure Gauge Standard monitors performance and assists in Pressure Switch Adjustments• Motor Bearings in Machined Housings Industrial Practice, provides longer life to the pump and assists

quieter running• Air Gap Motor with replaceable Motor Body means there is no Water Entry if the seal fails and provides

for easier servicing• Built in thermal and current overload protection and a capacitor permanently in circuit in the single

phase models• Three phase motors should always be protected with a suitable and compliant overload protection

DAB JET CAST IRON RANGE (ie DAB-62M)• Cast Iron Pump Body and motor support

DAB JET STAINLESS STEEL RANGE (ie DAB-JINOX62M)• Stainless steel Pump Body seal cover and pressure disc• Die Cast aluminium motor support

DAB JETCOM RANGE (ie DAB-JETCOM62M)• Technopolymer Pump Body• Die Cast aluminium motor support


DOMESTIC PUMPS2 YEAR DAB PUMP WARRANTY * parts & labour

SELF PRIMING CAST IRON JET PUMPS AND SPEAR POINT PUMPS

DAB-62M 0.44kW, 0.6hp, 240V DBP 409.00

DAB-82M 0.60kW, 0.8hp, 240V DBP 423.00

DAB-102M 0.75kW, 1.0hp, 240V DBP 495.00

DAB-132M 1.0kW, 1.36hp, 240V DBP 518.00

SELF PRIMING TECHNOPOLYMER JET PUMPS - AS/NZS4020 approved for drinking water

AS/NZS4020 approved for drinking water

DAB-JETCOM62MPP 0.44kW, 0.6hp, 240V DBP 411.00



Note: Jetcom MPP Pumps are fitted with “plug and play” leads.

SELF PRIMING STAINLESS STEEL JET PUMPS - AS/NZS4020 approved for drinking water


DAB-JINOX62M 0.44kW, 0.6hp, 240V DBP 449.00





SELF PRIMING STAINLESS STEEL HORIZONTAL MULTI-STAGE PUMPS - AS/NZS4020 approved for drinking waterDAB-EUROINOX30/30M 0.49kW, 0.67hp, 240V DBP 695.00

DAB-EUROINOX30/50M 0.55kW, 0.75hp, 240V DBP 738.00



JET FARM AND COMMERCIAL PUMPS2 YEAR DAB PUMP WARRANTY * parts & labourCast iron heavy duty self priming jet pumps. Suitable for pressure boosting, irrigation, wash down applications. Designed for pumping from tanks, rivers and dams. These pumps are very reliable in the toughest of environments.

SELF PRIMING TWIN STAGE JET ASSISTED CAST IRON JET PUMPSDAB-151M 1.1kW, 1.5hp, 240V DBP 1082.00

DAB-151T 1.1kW, 1.5hp, 415V DBP 989.00

DAB-251M 1.85kW, 2.5hp, 240V DBP 1235.00

DAB-251T 1.85kW, 2.5hp, 415V DBP 1123.00

SELF PRIMING SINGLE STAGE JET ASSISTED CAST IRON JET PUMPSDAB-200M 1.47kW, 2.0hp, 240V DBP 1078.00

DAB-200T 1.47kW, 2.0hp, 415V DBP 977.00

DAB-300M 2.2kW, 3.0hp, 240V DBP 1137.00

DAB-300T 2.2kW, 3.0hp, 415V DBP 1015.00

PART NO. DESCRIPTION CODE LIST ILLUSTRATION

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION



CONVERTABLE DEEP WELL CAST IRON JET PUMPS - ADD DEEP WELL INJECTOR KIT PRICESelf priming centrifugal pump for suction up to 27m, reached by means of an ejector to be inserted in the well with a diameter of 4” or over. For use in supplying water to farmhouses and in small scale agriculture.2 YEAR DAB PUMP WARRANTY * PARTS & LABOUR

DAB-DP151M 1.1kW, 1.5hp, 240V DBP 1004.00

DAB-DP151T 1.1kW, 1.5hp, 415V DBP 910.00

DAB-DP251M 1.85kW, 2.5hp, 240V DBP 1156.00

DAB-DP251T 1.85kW, 2.5hp, 415V DBP 1044.00

DEEP WELL INJECTOR KITS - ADD DEEP WELL JET PUMP PRICEIncludes injector body, (including nozzle & venturi) footvalve, polypropylene tailpipes and pipe fittings galvanised pump fittings, control valve, blanking plug and nipple * For offset applications, or to use larger pipe sizes add extension polypropylene risers to the injector body and pump if necessary.

DAB-E20KIT E20 Injector Kit DBP 350.00




COMPOSITE HORIZONTAL JET/MULTI-STAGE PUMPS WITH 316 S/STEEL SHAFT

DAB-JETCOMSP102M 0.75kW, 1.0hp, 240V DBP 557.00

DAB-EUROCOMSP30/50M 0.55kW, 0.75hp, 240V DBP 712.00

DAB-EUROCOMSP40/50M 0.75kW, 1.0hp, 240V DBP 824.00

VERTICAL MULTI-STAGE PUMPSDAB-KVCX35/30MPP 0.45kW, 0.6hp, 240V DBP 913.00

DAB-KVCX50/30MPP 0.75kW, 1.0hp, 240V DBP 1056.00








DAB-KVCX55/80T 1.50kW, 2.0hp, 415V DBP 1288.00








Note: Single Phase KVCX Pumps are fitted with “plug and play” leads.



MO

DEL

MP

PWB8

VPW

B18V

PWS2

0HPW

B60V

/HPW

B80V

C2B8

0VPW

B100

VC2

B100

VC2

B130

VPW

B150

VC2

00V

C2B2

00V

C240

VC2

B250

VC3

10V

C450

V

TAN

K89

104

136

339

412

579

461

689

827

731

1020

1020

1129

1120

1234

1720

HO

SE K

IT51

5151

5151

5151

5151

5151

5151

51

DA

B-62

MP

462

551

566

649

852

925

1092

974

1202

1340

1244

1533

1533

1642

1633

1747

2233

DA

B-82

MP

564

653

668

751

954

1027

1194

1076

1304

1442

1346

1635

1635

1744

1735

1849

2335

DA

B-10

2MP

636

725

740

823

1026

1099

1266

1148

1376

1514

1418

1707

1707

1816

1807

1921

2407

DA

B-13

2MP

659

748

763

846

1049

1122

1289

1171

1399

1537

1441

1730

1730

1839

1830

1944

2430

DA

B-JI

NO

X62M

P51

960

862

370

690

998

211

4910

3112

5913

9713

0115

9015

9016

9916

9018

0422

90

DA

B-JI

NO

X82M

P61

970

872

380

610

0910

8212

4911

3113

5914

9714

0116

9016

9017

9917

9019

0423

90

DA

B-JI

NO

X102

MP

691

780

795

878

1081

1154

1321

1203

1431

1569

1473

1762

1762

1871

1862

1976

2462

DA

B-JI

NO

X112

MP

714

803

818

901

1104

1177

1344

1226

1454

1592

1496

1785

1785

1894

1885

1999

2485

DA

B-JI

NO

X132

MP

714

803

818

901

1104

1177

1344

1226

1454

1592

1496

1785

1785

1894

1885

1999

2485

DA

B-EU

ROIN

OX3

0/30

MP

780

869

884

967

1170

1243

1410

1292

1520

1658

1562

1851

1851

1960

1951

2065

2551

DA

B-EU

ROIN

OX3

0/50

MP

788

877

892

975

1178

1251

1418

1300

1528

1666

1570

1859

1859

1968

1959

2073

2559

DA

B-EU

ROIN

OX4

0/50

MP

1009

1098

1113

1196

1399

1472

1639

1521

1749

1887

1791

2080

2080

2189

2180

2294

2780

DA

B-EU

ROIN

OX4

0/80

MP

1094

1183

1198

1281

1484

1557

1724

1606

1834

1972

1876

2165

2165

2274

2265

2379

2865

DA

B-15

1MP

1223

1312

1327

1410

1613

1686

1853

1735

1963

2101

2005

2294

2294

2403

2394

2508

2994

DA

B-20

0MP

1219

1308

1323

1406

1609

1682

1849

1731

1959

2097

2001

2290

2290

2399

2390

2504

2990

DA

B-25

1MP

1376

1465

1480

1563

1766

1839

2006

1888

2116

2254

2158

2447

2447

2556

2547

2661

3147

DA

B-30

0MP

1278

1367

1382

1465

1668

1741

1908

1790

2018

2156

2060

2349

2349

2458

2449

2563

3049

DA

B-D

P151

MP

1144

1233

1248

1331

1534

1607

1774

1656

1884

2022

1926

2215

2215

2324

2315

2429

2915

DA

B-D

P251

MP

1297

1386

1401

1484

1687

1760

1927

1809

2037

2175

2079

2368

2368

2477

2468

2582

3068

PRES

SURE

SYS

TEM

(PU

MP

FITT

ED W

ITH

TA

NK

) SEL

ECTI

ON

GU

IDE

Not

e: O

ptio

nal c

onne

ctio

n ki

ts a

re in

clud

ed in

the

abov

e se

lect

ion

guid

e.



DOMESTIC PRESSURE SYSTEMS AND BOOSTER SETSCan Lift Water up to 9m Able To Draw Water From More Locations. Industrial Quality Pressure Switch Fully Adjustable and Better Able To Tailor Pump Performance and Reduce Pressure Fluctuations. Cast Iron Or Stainless Steel Pump Bodies Corrosion Resistant , High Strengthfor Frost and Back Pressure Resistant. External Brass Non-Return Valve and Brass Tee Added Strength and Easier Servicing. Pressure Gauge Standard Monitors Performance and Assists In Pressure Switch Adjustments. Motor Bearings In Machined Housings Industrial Practice, Better Life and Quieter Running. Air Gap Motor with Replaceable Motor Body No Water Entry if Seal Fails. Easier Servicing2 YEAR DAB PUMP WARRANTY* Parts & Labour*OPTIONAL 6 Year DAB Pump Extended Warranty on selected models5 YEAR TANK GUARANTEE - No Maintenance No WorriesALL MODELS INCLUDE CHECK VALVE PRESSURE TANKS SHOWN ARE SOLD SEPERATLEY

SELF PRIMING CAST IRON JET PRESSURE PUMPS

DAB-62MP 0.44kW, 0.6hp, 240V DBP 462.00

DAB-82MP 0.60kW, 0.8hp, 240V DBP 564.00

DAB-102MP 0.75kW, 1.0hp, 240V DBP 636.00

DAB-132MP 1.0kW, 1.36hp, 240V DBP 659.00

SELF PRIMING STAINLESS STEEL JET PRESSURE PUMPS- AS/NZS4020 approved for drinking water


DAB-JINOX62MP 0.44kW, 0.6hp, 240V DBP 519.00





SELF PRIMING STAINLESS STEEL MULTISTAGE PRESSURE PUMPS- AS/NZS4020 approved for drinking water


DAB-EUROINOX30/30MP 0.45kW, 0.6hp, 240V DBP 780.00




PRE-CHARGE For PRESSURE SWITCH CONTROLLED PUMPS with traditional pressure differential of up to 140kPa (20psi), pre-charge to be 20kPa (3psi) below cut in pressure. ONCE the pre-charge is set, no regular air charge checks are required. GWS PRESSUREWAVE TANKS - ENERGY SAVING DEVICEExtends pump life, Reduces Noise, Stores Energy, EliminatesPump Starts, Protects against heat expansion, Stops water wastage from hot water heaters. GWS WATER MARK Approval-Applies to GWS PressureWave Tank sizes 8, 18, 20, 35 and 60 litres. ATS 5200-485-2006 . License No 60044

LOSS OF PRIME PROTECTION

TRE-LOGICSTOP

Electronic plug in device for the protection of pressure switch controlled pumps, or pumps without controls against dry running. Stops the motor and protects the pump in case of a water shortage.Suits pumps from 3.0A to 8.0A

BIA 126.00

http://www.whiteint.com.au



FARM PRESSURE SYSTEMS2 YEAR DAB PUMP WARRANTY * parts & labour 5 YEAR TANK GUARANTEE - No Maintenance No Worries

SELF PRIMING CAST IRON JET PRESSURE SYSTEMS - PRESSURE TANK SHOWN SOLD SEPERATLEY

DAB-151MP 1.1kW, 1.5hp, 240V DBP 1223.00

DAB-200MP 1.47kW, 2.0hp, 240V DBP 1219.00

DAB-251MP 1.85kW, 2.5hp, 240V DBP 1376.00

DAB-300MP 2.2kW, 3.0hp, 240V DBP 1278.00

DEEP WELL CAST IRON PRESSURE SYSTEMS - ADD DEEP WELL INJECTOR KIT PRICE

DAB-DP151MP 1.1kW, 1.5hp, 240V DBP 1144.00

DAB-DP251MP 1.85kW, 2.5hp, 240V DBP 1297.00

DEEP WELL INJECTOR KITS - ADD TO DEEP WELL JET PUMP PRICEIncludes injector body,(including nozzle & venturi) footvalve, polypropylene tailpipes and pipe fittings galvanised pump fittings, control valve, blanking plug and nipple * For offset applications, or to use larger pipe sizes add extension polypropylene risers to the injector body and pump if necessary.




VERTICAL MULTI-STAGE PRESSURE PUMPS AND SYSTEMS2 YEAR DAB PUMP WARRANTY * parts & labour *OPTIONAL 6 Year DAB Pump Extended Warranty on selected models 5 YEAR TANK GUARANTEE - No Maintenance No WorriesPumps are supplied with PRE-SET pressure system kit loose including barrel unions complete with “plug and play” leads. PRE-CHARGE For PUMPS CONTROLLED BY EITHER PRESSURE SWITCHES with differential over 140kPa (20psi), ELECTRONIC CONTROLLERS or VFD (variable speed drive) the precharge pressure should be set at 65% of themaximum system pressure. ONCE the pre-charge is set, no regular air charge checks are required.

DAB-KVCX35/30MP1 0.45kW, 0.6hp, 240V DBP 1350.00











Pressure Switch Settings MP1 180/380kPa MP2 390/590kPa, MP3 600/800kPaTwin & Triplex Systems P.O.A

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




ACTIVE PRESSURE SYSTEMSMultistage Self-Priming and Centrifugal Electric Pumps. Compact, Simplicity, Self-Sufficient, Efficient. The Active System is made up of nine different solutions, automatic lifting sets for domestic and small installations for civil, agriculture or industrial use. Each electric pump has a built-in, easy to install and ready for use, dual control device.This system guarantees that the pump operates at its very best, automatically controlling the performance and when necessary limiting the number of starts. ACTIVE does not require any type of maintenance or adjustment whatsoever. Includes braided flexible delivery connection hose.2 YEAR DAB PUMP WARRANTY* Parts & Labour*OPTIONAL 6 Year DAB Pump Extended Warranty on selected models


SELF PRIMING STAINLESS STEEL JET PRESSURE SYSTEMS- AS/NZS4020 approved for drinking waterDAB-ACTIVEJINOX62M 0.44kW, 0.6hp, 240V DBP 879.00

DAB-ACTIVEJINOX82M 0.6kW, 0.8hp, 240V DBP 920.00




SELF PRIMING STAINLESS STEEL MULTISTAGE PRESSURE SYSTEMS- AS/NZS4020 approved for drinking waterDAB-ACTIVEEINOX25/30M 0.37kW, 0.5hp, 240V DBP 1085.00

DAB-ACTIVEEINOX30/50M 0.55kW, 0.75hp, 240V DBP 1180.00



ACTIVE VARIABLE FREQUENCY DRIVE CONTROLLERSThe Active Driver device is an innovative variable speed electric pump integrated control system, capable of maintaining the a constant pressure in relation to the varied flow rates. The set pressure can be adjusted and the various settings and related error warnings can be viewed, thanks to a simple and immediate user interface.Active Driver comprises of: an inverter, a pressure sensor, a flow sensor. Some advantages in using Active Driver:- greater comfort, greater energy saving - greater noise reduction, reduced dimensions- eliminates overpressures, increased lifespan of the electric pump- easy installation, capable of controlling many different types of electric pumps Active Driver is equipped with a malfunctions protection system. In the event that a malfunction is verified, it is signalled on the display and, depending on the type of error, the electric pump can turn off.- protection against dry running, amperometric protection- electric pump overheating protection, against abnormal power supply voltages2 YEAR DAB PUMP WARRANTY* Parts & Labour

DAB-ACTIVEDRIVERMM1.1PP 240V 1PH in, 240V 1PH out 1.1kW 1 DBP 1240.00

DAB-ACTIVEDRIVERMM1.5PP 240V 1PH in, 240V 1PH out 1.5kW 1 DBP 1876.00

DAB-ACTIVEDRIVERMT1.0 240V 1PH in, 240V 3PH out 1.0kW DBP 1859.00

DAB-ACTIVEDRIVERMT2.2 240V 1PH in, 240V 3PH out 2.2kW DBP 2432.00

DAB-ACTIVEDRIVERTT3.0 415V 3 PH in, 415V 3PH out 3.0kW DBP 3450.00

DAB-ACTIVEDRIVERTT5.5 415V 3 PH in, 415V 3PH out 5.5kW DBP 4308.001 Fitted with 3 pin plug and female only plug and play lead

ACTIVE VARIABLE DRIVER FREQUENCY PRESSURE SYSTEMS

DAB-JETCOM62MAD 0.44kW, 0.6hp, 240V DBP 1494.00




DAB-EUROINOX40/50MAD 0.8kW, 1.1hp, 240V DBP 1893.00

DAB-EUROINOX40/80MAD 1.0kW, 1.36hp, 240V DBP 2000.00




ACTIVE VERTICAL MULTI-STAGE VARIABLE FREQUENCY PRESSURE SYSTEMSVertical multistage pump is suitable for use in small to medium water supply installations. Suitable for pressurization units, irrigation, dairy washdown and fire fighting Operating Range: from 50 to 200l/min. Max Head: up to 110m.- Innovative modern design - Easy and Rapid Maintenance - High performance - Power saving unique inline design- Robust construction - Features in-line suction and discharge ports - Integrated air degassing system2 YEAR DAB PUMP WARRANTY* Parts & Labour VFD system should include - minimum 18 litre pressure tank (FLE-PWB18V refer to page 16)

DAB-KVCX35/30AD 0.45kW, 0.6hp, 240V , c/w ActiveDriverMM1.1 DBP 2385.00

DAB-KVCX50/30AD 0.75kW, 1.0hp, 240V, c/w ActiveDriverMM1.1 DBP 2528.00







Pumps are supplied with ACTIVE DRIVERMM1.1 controller kit loose including barrel unions complete with “plug and play” leads.

DAB-KVCX55/80MAD 1.50kW, 2.0hp, c/w ActiveDriverMT2.2 DBP 3952.00

DAB-KVCX55/80TAD 1.50kW, 2.0hp, c/w ActiveDriverTT3.0 DBP 4970.00









Pumps are supplied with ACTIVE DRIVER controller kit loose including barrel unions. Twin and Triple Sets Available P.O.A

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




AUTOMATIC PRESSURE SYSTEMSFully electronic Comfortable ShowersAuto Restart Automatically restarts after water loss orinterrupted power Dry Run Protection Protects Pump From DamageEliminates Water Hammer Protects PlumbingCompact Size Easier Installation2 YEAR DAB PUMP WARRANTY* Parts & Labour *OPTIONAL 6 Year DAB Pump Extended Warranty on selected models

KP PERIPHERAL AUTOMATIC PRESSURE SYSTEM

DAB-KPF30-16MPCX 0.3kW, 0.4hp, 240V DBP 392.00

SELF PRIMING TECHNOPOLYMER JET AUTOMATIC PRESSURE SYSTEMS- AS/NZS4020 approved for drinking water


DAB-JETCOM62MPCX 0.44kW, 0.6hp, 240V DBP 530.00



SELF PRIMING CAST IRON JET AUTOMATIC PRESSURE SYSTEMS

DAB-62MPCX 0.44kW, 0.6hp, 240V DBP 567.00




SELF PRIMING STAINLESS STEEL JET AUTOMATIC PRESSURE SYSTEMS- AS/NZS4020 approved for drinking water

AS/NZS4020 approved

for drinking water

DAB-JINOX62MPCX 0.44kW, 0.6hp, 240V DBP 608.00





SELF PRIMING STAINLESS STEEL MULTISTAGE AUTOMATIC PRESSURE SYSTEMS- AS/NZS4020 approved for drinking water


DAB-EUROINOX30/30MPCX 0.49kW, 0.67hp, 240V DBP 854.00







VERTICAL MULTI-STAGE AUTOMATIC PRESSURE SYSTEMS

DAB-KVCX35/30MPCX 0.45kW, 0.6hp, 240V DBP 1316.00






*OPTIONAL 6 Year DAB Pump Extended Warranty on selected models. Pumps are supplied with SK10A Automatic Pump controller kit loose including barrel unions complete with “plug and play” leads.

PUMP CONTROLLERSWHITE INTERNATIONAL PUMP CONTROLLERS


WHI-SK10A

AUTO RESTART AUTOMATIC PUMP CONTROLLER240V, 1 ph, 10A max, 1.1kW, 1.5hp, IP65, Ports 1” BSPM. Cut in pressure setting range 1.5 bar.AS/NZS4020 approved for drinking water

BIA 76.00

WHI-SK13BA

AUTO RESTART ADJUSTABLE AUTOMATIC PUMP CONTROLLER240V, 1 ph, 10A max, 1.1kW, 1.5hp, IP65, Ports 1” BSPMAdjustable cut in pressure setting range 1.5 - 3.0 bar.AS/NZS4020 approved for drinking water

BIA 77.00


WATERTECH PUMP CONTROLLERS

WAT-PRESCONTROL Automatic Pressure Control up to 1.5kW, 1” DBP 185.00

WAT-MASCONTROL1-1/4 Automatic Pressure Control up to 2.2kW, 1.1/4” DBP 272.00

WAT-CONTROLPRESS Automatic Pressure Control up to 2.2kW, 1.1/4” with pressure regulator. DBP 429.00

TREVI PUMP CONTROLLERS

TRE-LOGICSTOP

Electronic plug in device for the protection of pressure switch controlled pumps, or pumps without controls against dry running. Stops the motor and protects the pump in case of a water shortage. Suits pumps from 3.0A to 8.0A

BIA 126.00

TRE-LOGICFLOWElectronic Flow Switch with dry run protection for flooded suctions and mains boostingAutomatic Flow Switch up to 1.1 kW, 12 bar, 1”

BIA 102.00

TREVI VARIABLE SPEED DRIVE PUMP CONTROLLERSCan be mounted on surface pumps and used with submersible pumps. Easy to install, set and adjust. Ensures energy savings. Comes with a built in accumulator (no need for expansion tank), non-return valve, filter and pipe fittings. Regulates system and starting pressure. Troubleshoots and provides reference codes. Reduces water hammer, and is maintenance free.

TRE-LOGICSP8.5 8.5 A, 240V, 1PH / 240 V, 1PH BIA 1279.00

TRE-LOGICSP11 11 A, 240V, 1PH / 240 V, 1PH BIA 1490.00

TRE-LOGICSP13 13 A, 240V, 1PH / 240 V, 1PH BIA 1750.00

TRE-LOGICSTP8.5 8.5 A, 240V, 1 PH / 240V, 3PH BIA 1595.00

TRE-LOGICSTP11 11 A, 240V, 1 PH / 240V, 3PH BIA 1806.00



DAB POOL PUMPSApplicationsHigh efficiency self-priming centrifugal pumps with built-in large capacity prefilter. Completely watertight motor. Extremely quiet running and great reliability, developed for water circulation and filtration in domestic and residential swimming pools. Suitable also for special applications that call for handling of aggressive liquids, in fish farms, agriculture and industry.

Pump construction featuresPump body in fibreglass reinforced technopolymer. Strainer cover in clear antioxidant polycarbonate toguarantee constant visibility through time. Nylon strainer. Impeller in fibreglass-reinforced technopolymer developed to ensure total coverage and isolation of the motor shaft from the pumped liquid. Diffuser in reinforced technopolymer. Mechanical seal in carbon / alumina / NBR / AISI 316. Pump body O-rings in NBR, threaded fasteners and reinforcing rings in AISI 316. Butterfly filler and drain plugs that can be removed and refitted without tools.

Motor construction characteristicsAsynchronous continuous duty 2-pole motor (S1) with generous range of power ratings from 0.5HP to 3HP, single phase and three-phase (see technical specifications). Motor casing in die cast aluminium with electrophoresic surface treatment to prevent oxidation even in aggressive environmental conditions. Baseplate supplied as standard with rubber mounts to reduce vibration transmission.Single phase version with integral thermal and overcurrent protection and permanent split capacitor (PSC), assembled inside the terminal box for all versions.Motor and terminal box protection rating: IP55Insulation class: FBall bearings: water-proof, sealed, resistant to water and humidity.Motor construction to EN 60335-2-41 standardsCertificate of Approval No. NSW25167

DAB-EUROSWIM50M 0.33 kW, 0.5 hp, 240V DBP 884.00






DAB-EUROSWIM300T 2.2 kW, 3.0 hp, 415V DBP 1307.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION






KP PERIPHERAL PUMPSDAB-KPF30-16M 0.3kW, 0.4hp, 240V DBP 235.00

DAB-KP60-6M 0.37kW, 0.5hp, 240V DBP 575.00

DAB-KP60-6T 0.37kW, 0.5hp, 415V DBP 575.00

DAB-KP60-12M 0.75kW, 1.0hp, 240V DBP 653.00

DAB-KP60-12T 0.75kW, 1.0hp, 415V DBP 629.00

CENTRIFUGAL K SERIES PUMPSDesigned for cooling towers, air conditioning, irrigation, washdown and general tank filling purpose applications.Cast Iron Pump Body and Motor Support. Stainless Steel Driving Shaft. Carbon / Ceramic Mechanical Seal. Closed Motor, Cooled by External Ventilation. Built In Thermal Overload Protection2 YEAR WARRANTY* Parts & Labour

KP PERIPHERAL PUMPSDAB-K35-40M 0.75kW, 1.0hp, 240V, 2 pole DBP 479.00

DAB-K35-40MP 0.75kW, 1.0hp, 240V, 2 pole DBP 629.00

DAB-K45-50M 1.1kW, 1.5hp, 240V, 2 pole DBP 609.00


DAB-K45-50T 1.1kW, 1.5hp, 415V, 2 pole DBP 717.00







SMALL FLOW K SERIESDAB-K20-41M 0.37kW, 0.5hp, 240V, 2 pole DBP 309.00







MEDIUM FLOW K SERIESDAB-K14-400M 1.85kW, 2.5HP, 240V, 2 pole DBP 894.00

DAB-K14-400T 1.85kW, 2.5HP, 415V, 2 pole DBP 763.00




CIRCULATORS - HOT WATERCAST IRON DOMESTIC - 2 YEAR WARRANTY* Parts & Labour

CENTRE DISTANCE OUTLET

DAB-VA35-130 130mm 1 1/2” G DBP 239.00

DAB-VA55-130 130mm 1 1/2” G DBP 225.00

DAB-VA65-130 130mm 1 1/2” G DBP 232.00

BRONZE DOMESTIC - 2 YEAR WARRANTY* Parts & LabourCENTRE DISTANCE OUTLET

DAB-VS65-150 150mm 1 1/2” G DBP 398.00

CIRCULATOR ACCESSORIESDAB-UNION3/4 Cast Iron (pair) suit 1-1/2” port DBP 18.00

DAB-UNION1 Cast Iron (pair) suit 1-1/2” port DBP 18.00

DAB-UNION3/4B Brass (pair) suit 1-1/2” port DBP 46.00

DAB-UNION1B Brass (pair) suit 1-1/2” port DBP 46.00

DAB ACTIVE SUB DRIVER

DAB Borehole pump with 0.75kW 3 phase motor + DAB-ACTIVEDRIVERMT1.0 Variable Frequency Drive (240V in) and FLE-ENERGYSAVER18V.

DAB-ACTIVESUBS4A25M heads to 159m, flows to 25l/m DSU 2599.00

DAB-ACTIVESUBS4B16M heads to 99m, flows to 40l/m DSU 2599.00

DAB-ACTIVESUBS4C13M heads to 71m, flows to 70l/m DSU 2599.00

DAB-ACTIVESUBS4D8M heads to 48m, flows to 100l/m DSU 2599.00

DAB HIGH HEAD SUBMERSIBLE

DAB-DIVER6-700MA

High Head Submersible Clean Water PumpDewatering Pump with Automatic float switch, 340kpa, 80l/min, 15m power cable2 year warranty.

DBP 820.00

DIVER 6 DIVERTRON

DAB-DIVERTRON1200

The pump is a light and compact high head submersible clean water automatic pressure system pump supplied wired and ready to install. The pump includes an electronic automatic restart pump control with dry run protection.Corrosion resistant pump components.Fully automatic operation. Shaft seal with sand protection boot. 240V single phase motor with in-built auto reset thermal overload. Multistage technopolymer submersible pump Electronic Pump with Auto Restart. 9 Taps, 470kpa, 95l/min, 15m power cable, 2 year warranty.

DBP 909.00




SUBMERSIBLE BOREHOLE PUMPSTechnopolymer Impellers and Diffusers Resistance To Wear and Corrosion. Special Anti Abrasion Wear Ring Reduces Wear Due To Sand, Allows Easier Starting. Cast Stainless Steel Support And Valve Body High Strength and CorrosionResistance. Stainless Steel Other Components High Strength and Corrosion Resistance. Single-Phase Motors Have Remote Control Box With Manual Reset Overload. Lower Running Costs. Saves Motor, Easier To Service. Broad Range Suits More Applications. Floating Impeller Stack Easier Starts in Abrasive Conditions. Posidrive Pump Shaft Improves Impeller Life in Adverse Conditions2 YEAR DAB PUMP WARRANTY* Parts & Labour

S4 4” STAINLESS STEEL PUMPS WITH 240V PSC MOTORS COMPLETEDESCRIPTION kW

DAB-S4A8M 240V Complete Pump + Control Box 0.37 DSU1 1100.00






DAB-S4B5M 240V Complete Pump + Control Box 0.37 DSU1 1000.00








DAB-S4C6M 240V Complete Pump + Control Box 0.37 DSU1 1130.00







DAB-S4D4M 240V Complete Pump + Control Box 0.37 DSU1 1213.00







DAB-S4E6M 240V Complete Pump + Control Box 0.75 DSU1 1630.00




DAB-S4F7M 240V Complete Pump + Control Box 2.2 DSU1 2645.00

NOTE: Above prices include control box and cable joint kit for all single phase pumps.

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




S4 4” STAINLESS STEEL PUMPS WITH 3PH MOTORS COMPLETEDESCRIPTION kW

DAB-S4A12T 415V Complete Pump 0.37 DSU1 1220.00





DAB-S4B8T 415V Complete Pump 0.37 DSU1 1035.00







DAB-S4C6T 415V Complete Pump 0.37 DSU1 1061.00







DAB-S4C45T 415V Complete Pump 3 DSU1 3421.00

DAB-S4C51T 415V Complete Pump 3 DSU1 3478.00

DAB-S4D4T 415V Complete Pump 0.37 DSU1 1189.00







DAB-S4D29T 415V Complete Pump 3 DSU1 3019.00




DAB-S4E6T 415V Complete Pump 0.75 DSU1 1430.00




DAB-S4E20T 415V Complete Pump 3 DSU1 2851.00






DAB-S4F7T 415V Complete Pump 2.2 DSU1 2260.00

DAB-S4F10T 415V Complete Pump 3 DSU1 2983.00

DAB-S4F13T 415V Complete Pump 4 DSU1 3499.00

DAB-S4F18T 415V Complete Pump 5.5 DSU1 4002.00

NOTE: Includes cable joint kit




SUBMERSIBLE BOREHOLE PUMPSS4 4” WET ENDSDAB-S4A8-1 Pump Only DSU2 459.00

DAB-S4A12-1 Pump Only DSU2 609.00





DAB-S4B5-1 Pump Only DSU2 399.00








DAB-S4C6-1 Pump Only DSU2 489.00









DAB-S4D4-1 Pump Only DSU2 572.00











DAB-S4E6-1 Pump Only DSU2 911.00










DAB-S4F7-1 Pump Only DSU2 1494.00






SUBMERSIBLE BOREHOLE PUMPSS4 4” SERIES 4” TESLA PSC MOTORS

DESCRIPTION kW

TES-M037S TESLA Motor 240V PSC 0.37 DSU2 435.00

TES-M037T TESLA Motor 415V 0.37 DSU2 525.00











TES-M300T TESLA Motor 415V 3 DSU2 1215.00

TES-M400T TESLA Motor 415V 4 DSU2 1500.00


* Note: Tesla psc motors require Tesla psc control boxes

4” TESLA PSC MOTOR CONTROL BOXES - 2 YEAR TESLA WARRANTY * parts & labour

TES-CBOX037 Control Box TESLA 0.37 DSU2 159.00






S4 SERIES 4” TESLA 2 WIRE MOTORS - 2 YEAR TESLA WARRANTY * parts & labour

TES-M037S2W TESLA Motor 240V 2 Wire 0.37 DSU2 560.00




BOREHOLE PUMP ACCESSORIES

Fast Kit Cable

TESLA PROBLESS MANAGEMENT CONTROLS - 2 YEAR TESLA WARRANTY * parts & labour

TES-GUARDIAN-ME Probless Management Control 240V 18A DSU2 501.00

TES-GUARDIAN-1E Probless Management Control 415V 9A DSU2 579.00

TES-GUARDIAN-2E Probless Management Control 415V 18A DSU2 799.00

DAB-SBC Bore Cap 1-1/2” DSU2 106.00

DAB-SDC2.5 Electrical Drop Cable 2.5mm Waterproof to 100m DSU2 18.00

DAB-SSR Synthetic Cable Rope DSU2 4.00

DAB-SSSR4X300 300m Roll, 4mm, 7x19, 304SS Safety Rope DSU2 440.00

DAB-SSSR4X1000 1000m Roll, 4mm, 7x19, 304SS Safety Rope DSU2 1456.00

TES-FASTKITCABLE Adaptor Franklin to Tesla DSU2 168.00

TES-MOTCABLE1.7 TESLA Flat Cable for Motor 1.5m DSU2 95.00

TES-MOTCABLE2.7 TESLA Flat Cable for Motor 2.5m DSU2 124.00

DAB-JKIT Splice Kit for 2.5mm Cable DSU2 47.00




SUBMERSIBLE DRAINAGE & VORTEX PUMPSReinforced Inert Plastic Body Non-Corrosive For Long Life. Built In Rigid Float Activated Automatic Switch Factory Set For Reliable Operation, Eliminate Float Cable Failure. Stainless Steel Shaft And Screws Corrosion Resistant For Longer Life. Repairable Longer Service Life. Ball Bearings Longer Life And Quiet Operation. Ground Rotor Shaft, Triple Lip Seals In Oil. Chamber Longer Seal And Pump Life.2 Year DAB Pump Warranty

SUBMERSIBLE DRAINAGE PUMPSDAB-NOVA180A 0.22kW, 0.3hp, 240V, AUTOMATIC DBP 295.00

DAB-NOVA200 0.22kW, 0.3hp, 240V, MANUAL DBP 300.00

DAB-NOVA300A 0.22kW, 0.3hp, 240V, AUTOMATIC DBP 330.00

DAB-NOVA600A 0.55kW, 0.75hp, 240V, AUTOMATIC DBP 497.00

SUBMERSIBLE MULTI-PURPOSE ‘VORTEX’ DRAINAGE PUMPIdeal for drainage, emptying, pumping water between containers and small irrigation. Suitable to pump dirty water containing particles with maximum diameter up to 30mm. Anti corrosive and rust proof materials. Motor with thermic overload protection. Wear resistant shaft and impeller. Excellent cooling in the motor shaft that enables the pump to operate even when it is partially submerged. Automatic version with start/stop float switch. Supplied with power cable with plug and self sealing fitting2 Year DAB Pump Warranty

DAB-FEKA300A 0.22kW, 0.3hp, 240V, AUTOMATIC DBP 270.00

DAB-FEKA600A 0.55kW, 0.75hp, 240V, AUTOMATIC DBP 510.00

UNDER BASIN PUMP STATION - GREY WATER PUMP UNITS30 Litre under basin automatic collecting station.Features30L technopolymer container. Fitted with 240V automatic DAB-NOVA300A drainage pump. 5m power lead. Discharge check valve. Flow rates from 16l/min to 120l/m,. Heads up to 6m. Suitable for water temperature up to 50oC in normal operation and up to 90oC for 3 minutes.2 YEAR DAB Pump Warranty * Parts and Labour

DAB-NOVABOX30-300M 30L NOVA300 pump fitted DBP 882.00

SUBMERSIBLE STAINLESS STEEL DRAINAGE PUMPSPump completely in stainless steel AISI 304 with thrust ring type impeller for draining clear waste water containing solids of max 10 mm diameter. Through body cooling. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed oil chamber (non-toxic oil). Cable Length: 10 metres. Easy and rapid maintenance2 Year DAB Pump Warranty

DAB-DRENAG1000MA 1.0kW, 1.36hp, 240V Flows to 392l/min, heads to 15.3m DBP 1599.00

DAB-DRENAG1200MA 1.2kW, 1.6hp, 240V Flows to 465l/min, heads to 17m DBP 1759.00

SUBMERSIBLE STAINLESS STEEL VORTEX PUMPSPump completely in stainless steel AISI 304 and microcasting stainless steel impeller. Double mechanical seal with interposed oil chamber (non-toxic oil). VS - Full Stainless Steel. Cable Length: 10 metres.2 Year DAB Pump Warranty

DAB-FEKAVS550MA 0.55kW, 0.75hp, flows to 330l/min, heads to 7.4m DBP 945.00






ACCESSORIES

DAB-6BARPS Pressure Switch 6 BAR DBP 108.00

SK6

SK9A

SKIT6

SK12

SK12CWB

DAB-12BARPS Pressure Switch 1.2 - 12 BAR DBP 111.00

DAB-6BARPG Pressure Gauge 6 BAR DBP 24.00


BIA-SKIT6

Switch Kit complete with plug and play leads, pressure gauge, 1” non-return valve and nipple. Pressure switch has stainless steel back plate with union, and is adjustable between 1 and 6 bar. Factory setting is 1.4 – 2.8 bar, IP44 enclosure.

BIA 119.00

DAB-3WT Three Way Tee 1”x1”x1” Bronze DBP 21.00

DAB-5WT Five Way Tee 1/4”x1/4”x1”x1”x1” Bronze DBP 31.00

DAB-NRV25FM Check Valve 1” Bronze F/M DBP 25.00

DAB-NRV25MF Check Valve 1” Bronze M/F DBP 52.00

DAB-STR25M Screw In Strainer 1” Bronze DBP 13.00

BIA-SK6LOSS OF PRIME PRESSURE SWITCH Pressure Switch Setting: 1 - 6 Bar Factory Setting: 1.4 - 2.8 Bar, 240V, 1 ph, Connection: 6mm (1/4”) BSP, Indoor Use

BIA 12.00

BIA-SK9A

ADJUSTABLE PRESSURE SWITCH 6 BAR With stainless steel back plate Pressure Switch Setting: 1 - 6 Bar, Factory Setting: 1.4 - 2.8 Bar 240V, 1 ph, IP44, Connection: 6mm (1/4”) BSP

BIA 15.00

BIA-SK12(5M) 5 METRE FLOAT SWITCH WITH H05 NEOPRENE CABLE BIA 14.00

BIA-SK12(10M) 10 METRE FLOAT SWITCH WITH H05 NEOPRENE CABLE 240V, 1 ph, 10A max, “3 wire”, IP68, max 50oC. BIA 22.00

BIA-FSK1 10 METRE FLOAT SWITCH WITH H07 NEOPRENE CABLE240V, 1 ph, 16A max, “3 wire”, IP68, max 50oC. BIA 29.00

BIA-FSK1-20 20 METRE FLOAT SWITCH WITH H07 NEOPRENE CABLE240V, 1 ph, 16A max, “3 wire”, IP68, max 50oC. BIA 50.00

BIA-SK12CWB FLOAT SWITCH COUNTERWEIGHT 200g gland mounting BIA 3.00

BIA-PIGGYBACKFLOAT PIGGYBACK FLOAT SWITCH 16(8)A BIA 87.00

BIA-TSHKITA RAINWATER TANK SUCTION HOSE & FLOAT KIT BIA 63.00

BIA-SHKIT PRESSURE PUMP SUCTION HOSE KIT 0.7m BIA 43.00

BIA-DHKIT PRESSURE PUMP DISCHARGE HOSE KIT 1.4m BIA 32.00

STAINLESS STEEL BRAIDED CONNECTION KITSFLE-700MFCKIT 1” F x 1” M x 700mm FLE 51.00

FLE-700MFECKIT 1” 90oF x 1” M x 700mm FLE 51.00

FLE-800MFCKIT 1” F x 1” M x 800mm FLE 53.00




Some dealer supplied fittings may be required for some pressure systems Maximum working pressure 6 bar for higher pressures rigid Pipework is recommended

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





PRESSURE TANKSPRESSURE WAVE TANKSStainless Steel Water Connection Corrosion Resistant For Longer Life. Controlled Action Diaphragm Longer Life. Brass Air Stem With Sealing Cap Eliminates Air Leaks, Longer Life, No Regular Air Checks Required. Appliance Quality Paint Finish Looks Better, Longer Life. Food Grade FDA Approved High-Grade Butyl Membrane. Suitable For Drinking Water, Longer Life, Bacteria Resistant. Condensation Reducing Design Reduces Corrosion, Increases Life5 YEAR TANK REPLACEMENT GUARANTEE

VERTICAL TANKS, Diaphragm FDA Approved - High Grade ButylDESCRIPTION DRAW OFF

FLE-PWB2V 2L Vertical, 10 Bar 1” 0.6 Litre FLE 58.00

FLE-PWB8V 8L Vertical, 10 Bar 1” 3 Litre FLE 89.00







HORIZONTAL TANKS, Diaphragm FDA Approved - High Grade ButylDESCRIPTION DRAW OFF

FLE-PWS20H 20L Horizontal, 10 Bar 1” 8 Litre FLE 136.00

FLE-PWS60H 60L Horizontal, 10 Bar 1” 22 Litre FLE 339.00

INDUSTRIAL HIGH PRESSURE TANKS, Diaphragm FDA Approved - High Grade ButylDESCRIPTION DRAW OFF

FLE-PWB8V-16 8L Vertical, 16 Bar 1” 3 Litre FLE 157.00




SOME DEALER SUPPLIED FITTINGS MAY BE REQUIRED FOR SOME PRESSURE SYSTEMS. MAXIMUM WORKING PRESSURE 6 BAR for HIGHER PRESSURES RIGID PIPEWORK IS RECOMMENDED

PRESSURE TANK WALL BRACKETS

FLE-BR2V Bracket to suit 2V FLE 12.00




PRE-CHARGEFor PRESSURE SWITCH CONTROLLED PUMPS with traditional pressure differential of up to 140kPa (20psi), pre-charge to be 20kPa (3psi) below cut in pressure.For PUMPS CONTROLLED BY EITHER PRESSURE SWITCHES with differential over 140kPa (20psi), ELECTRONIC CONTROLLERS or VFD (variable speed drive) the prechange pressure should be set at 65% of the maximum system pressure. ONCE the pre-charge is set, no regular air charge checks are required.

GWS WATERMARK APPROVAL applies to GWS Pressure Wave tanks sizes 2, 8, 18, 20, 35 & 60L. ATS5200-485-2006. Lic No. 60044



CHALLENGER SERIESEfficient and Cost-Effective. Patented Controlled Action Double Diaphragm Assembly. Threaded Nut Easy installation of Pump Stand. Welded Malleable Elbow, Adjustable Air charge. Appliance Quality Paint Finish Over Epoxy Primer Coat,. Durability and High Luster. Suitable For Drinking Water, Longer Life, Bacteria Resistant. Condensation Reducing Design Reduces Corrosion, Increases Life. Diaphragm’s Positive Lock Internal Clench Ring Cannot SlipDoes Not Rely on the Tank Wall. Stainless Steel Port Diffuser, directs water flow upward and outward while locking the lower diaphragm in place5 YEAR TANK REPLACEMENT GUARANTEE

DESCRIPTION DRAW OFF

FLE-C200V 200L Vertical, 10 Bar 1-1/4” 72 Litre FLE 1020.00




SUPER FLOW TANKS, EPDM MEMBRANE - 25 BAR (2500 kPa)High Pressure Durable interchangeable tiered construction membrane. 100% EPDM diaphragm, maximum temperature up to 100oC. Integral pressure gauge for SF10025V. High quality polyurethane paint over rugged steel construction - green. Reinforced tripod legs for easy installation for 60L & 100L.1 Year Membrane Warranty - 2 Year Tank Warranty


FLE-SF6025V 60L Vertical, 25 Bar 1” 22 Litre FLE 671.00

FLE-SF10025V 100L Vertical, 25 Bar 1” inc Pressure Gauge 36 Litre FLE 1588.00

C2 FIBREGLASS TANKS - 10 BAR (1000 kPa)Lightweight non-corroding scratch resistant construction. Precision injection moulded copolymer polypropylene domes. Reinforced with durable continuous strand fibreglass. Sealed with epoxy resin. Rugged injection moulded ABS base. Patented CAD-2 controlled action diaphragm, 100% potable quality butyl. Internal clench ring becomes even more positive at higher pressures. Double diaphragm reduces condensation due to ‘air buffer’ design. Reinforced base mounted plastic flow-through connection to prevent solids build-up. Maximum Temperature up to 60oC .Standard maximum pressure 150 PSI / 10 Bar 5 Year Tank Warranty


FLE-C2B80V 80L Vertical, 10 Bar 1” 29 Litre FLE 579.00





PRE-CHARGEFor PRESSURE SWITCH CONTROLLED PUMPS with traditional pressure differential of up to 140kPa (20psi), pre-charge to be 20kPa (3psi) below cut in pressure.For PUMPS CONTROLLED BY EITHER PRESSURE SWITCHES with differential over 140kPa (20psi), ELECTRONIC CONTROLLERS or VFD (variable speed drive) the prechange pressure should be set at 65% of the maximum system pressure. ONCE the pre-charge is set, no regular air charge checks are required.

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





PACKAGED PUMP STATIONSUNDER BASIN PUMP STATION - GREY WATER PUMP UNITS30 Litre under basin automatic collecting station.Features30L technopolymer container. Fitted with 240V automatic DAB-NOVA300A drainage pump. 5m power lead. Discharge check valve. Flow rates from 16l/min to 120l/m,. Heads up to 6m. Suitable for water temperature up to 50oC in normal operation and up to 90oC for 3 minutes.2 YEAR DAB Pump Warranty * Parts and Labour

DAB-NOVABOX30-300M 30L NOVA300 pump fitted DBP 882.00

BLUEBOX POLYETHYLENE PUMP STATIONS

374

BlueBoX 90 - 150

PRODUCT CATALOGUE 2010/3lifting stations

Electrical accessories

Installations

types of installationBlueBoX lifting stations can be installed on-floor or in-floor.they are prefitted for use with Zenit pumps with vortex impeller or with grinding systems, which must be ordered separately depending on the customer’s specific requirements.the large number of intake and outlet pipeline fittings allow optimal installation even on existing plants. What’s more, the many hydraulic and electric accessories make BlueBoX lifting stations convenient to install and use.

in view of their small size, 90 and 150 litre models can be installed coupled directly to the pump. the bottom of the BlueBoX is shaped to hold the pump in position without the aid of additional accessories. Dg Blue pumps with vortex impeller or gRBlue models with grinder can be used. With grinders, an ordinary threaded 90° bend must be used to change the direction of the delivery line. the PVC outlet pipe connected to the pump has a threaded coupling which allows the pump to be easily separated from the pump for any maintenance requirements, without disconnecting the pipelines from the lifting stations.

in these models, the use of pumps with start/stop float-switch is recommended. this makes installation simple and inexpensive. an optional float switch with an overflow alarm function, for connection to an electrical control panel, can be used if required.

pump not included

BLUEBOX stations are suitable for collecting and lifting clear, rain and waste water from washing machines, sinks and WCs in systems installed at a lower level than the sewer, in locations such as garages or basements. The 90 and 150 models are compact and easy to install, making them ideal for civil and residential contexts. Thanks to the rich assortment of electrical and hydraulic accessories available, the 250 and 400 litre versions are suitable for industrial and residential installations.

ZEN-BLUEBOX90 90 Litre Collecting Station for Waste Water ZDP 469.00

ZEN-BLUEBOX150 150 Litre Collecting Station for Waste Water ZDP 586.00

Suitable Pumps that can be supplied loose are: ZEN-DGBLUE40/2/G40VMG; ZEN-DGBLUE50/2/G40VMG; ZEN-DGBLUE75/2/G40VMG; ZEN-DGBLUE100/2/G40VMG; ZEN-GRBLUEP100/2/G40HMEX; ZEN-GRBLUEP100/2/G40HMG; ZEN-GRBLUEP100/2/G40HMGEX; ZEN-GRBLUEP100/2/G40HTEX

BLUEBOX POLYETHYLENE LIFTING STATIONS

Blue Box Standard

Blue Box featuring Zenit DG Blue Vortex Pump

Blue Box featuring guide rails ball type non return

valve & Zenit GR Blue Grinder Pump

ZEN-BLUEBOXDG

250 Litre Collecting Station for Waste Water.Features250L polyethylene tank 600H x 900L x 500W (mm). Constructed for either in ground or above ground installation. Able to handle liquids such as raw sewage, trade waste, effluent and storm water. 11/2” galvanised outlet pipework and gaskets. Installation accessories12 MONTHS ZENIT BLUEBOX Warranty *Parts and Labour

ZDP 1127.00

ZEN-BLUEBOXDGBLUE40M ZEN-BLUEBOXDG with ZEN-DGBLUE40/2/G40VMG fitted ZDP 1535.00



ZEN-BLUEBOXDGBLUE100M

ZEN-BLUEBOXDG with ZEN-DGBLUE100/2/G40VMG fitted12 MONTHS ZENIT BLUEBOX Warranty*Parts and labour2 YEAR ZENIT BLUE SERIES Pump Warranty*Parts and Labour

ZDP 1711.00

ZEN-BLUEBOXGR

250 Litre Automatic Collecting Station for Domestic and Industrial Sewage.FeaturesCoupling foot with 2” vertical outlet and built in air bleed.2” ball type non return valve. 2” galvanised outlet pipework and gaskets. Installation accessories

ZDP 1753.00

ZEN-BLUEBOXGRBLUE100M ZEN-BLUEBOXGR with ZEN-GRBLUEP100/2/G40HMG fitted ZDP 2878.00

ZEN-BLUEBOXGRBLUE150M ZEN-BLUEBOXGR with ZEN-GRBLUEP150/2/G40HMG fitted ZDP 3062.00

ZEN-BLUEBOXGRBLUE200M

ZEN-BLUEBOXGR with ZEN-GRBLUEP200/2/G40HMG fitted12 MONTHS ZENIT BLUEBOX Warranty*Parts and labour2 YEAR ZENIT BLUE SERIES Pump Warranty*Parts and Labour

ZDP 3588.00



PACKAGED PUMP STATIONSPOLYETHYLENE PUMP STATIONS - 12 MONTH Warranty *Parts and LabourSERIES 250 250 Litre collecting station with a polyethylene lid.Features250L polyethylene tank. 730mm diameter x 900mm deep. Access cover 600mm x 600mm. Constructed for in ground installation. Able to handle liquids such as raw sewage, trade waste, effluent and storm water. Available as a bare unit without a pump or pipework. Pump option of a single free standing PVC interconnecting pipework. Optional Class B Gatic lid

ZEN-SERIES250 250 Litre Empty with PE Lid without pump ZCP 1111.00

Additional Single Plumbing ZCP 750.00

Additional Class B 600X600 Gatic Lid ZCP 750.00

Pump, ZENIT Ball Type NRV to be added

SERIES 900 900 Litre collecting station with a polyethylene lid.Features900L polyethylene tank. 1120mm diameter x 1200mm deep. Access cover 600mm x 600mm. Constructed for in ground installation. Able to handle liquids such as raw sewage, trade waste, effluent and storm water. Available as a bare unit without a pump or pipework. Pump options of single or dual units either free standing or guide rail mounted. PVC interconnecting pipework. Optional Class B Gatic lid

ZEN-SERIES900 900 Litre Empty PE Lid without pump ZCP 2194.00


Additional Single Plumbing + Guide Rails ZCP 1083.00

Additional Dual Plumbing ZCP 944.00

Additional Dual Plumbing + Guide Rails. ZCP 1278.00


Pumps, ZENIT Ball Type NRV(S) and Discharge Pedestal (S) to be added

POLYETHYLENE PUMP STATIONS - 12 MONTH Warranty *Parts and LabourSERIES 1200 1200 Litre collecting station with a polyethylene lid.Features1200L polyethylene tank. 1120mm diameter x 1600mm deep. Access cover 600mm x 600mm. Constructed for in ground installation. Able to handle liquids such as raw sewage, trade waste, effluent and storm water. Available as a bare unit without a pump or pipework. Pump options of single or dual units either free standing or guide rail mounted. PVC interconnecting pipework. Optional Class B Gatic lid





Additional Dual Plumbing + Guide Rails. ZCP 1361.00



SERIES 3000 3000 Litre collecting station with a polyethylene lid.Features3000L polyethylene tank. 1730mm diameter x 2125mm deep. Access cover 900mm x 600mm. Constructed for in ground installation. Able to handle liquids such as raw sewage, trade waste, effluent and storm water. Available as a bare unit without a pump or pipework. Pump options of single or dual units either free standing or guide rail mounted. PVC interconnecting pipework. Optional Class B Gatic lid





Additional Dual Plumbing + Guide Rails ZCP 1500.00






PACKAGED PUMP STATIONSCONTROLLERS - 12 MONTH Warranty *Parts and LabourThe control is characterised by: Embossed ZENIT touch pad controls IP55 polycarbonate UV resistant enclosure 1.75m power cable and three pin moulded plug Low voltage float switch circuitry 10m three wire float switch and counterweight (optional) Long life LED Power On and Level Alarm visual indicators Industrial grade high level external buzzer. Voltage free relay output (5amp rated) to be utilised to drive a vast variety of auxiliary devices Loop Power connection point for 240Vac 1Phase Automatic Pump Simple change from “5 Minute Auto Silence” to “Continuous” Buzzer sounding feature, for applications where controller is mounted in an obscure place. On board provision for connection of remote located, low voltage ‘Power On’ & ‘Alarm’ indicator lights and mute button/switch. Four pin connection for keypad, which enables ease of product installation. External Mounting Brackets Press the Mute button for 3 seconds and the Alarm Light and Buzzer will be activated. ‘Test Feature’ Chirp Mode. If buzzer has automatically silenced, it will enter chirp mode. A chirp every 5 minutes. Alarm LED indicator remains on till alarm condition has been eradicated. Supplied pre wired for high level alarm applications. Simple DIY installation.

ZEN-ALARM High Level 240V Stand Alone Module ZCP 300.00

The control is characterised by: Embossed ZENIT touch pad controls IP55 polycarbonate UV resistant enclosure 1.75m power cable and three pin moulded plug Low voltage float switch circuitry 10m three wire float switch and counterweight (optional) Long life LED Power On and Level Alarm visual indicators Industrial grade high level external buzzer. Voltage free relay output (5amp rated) to be utilised to drive a vast variety of auxiliary devices Loop Power connection point for 240Vac 1Phase Automatic Pump Simple change from “5 Minute Auto Silence” to “Continuous” Buzzer sounding feature, for applications where controller is mounted in an obscure place. On board provision for connection of remote located, low voltage ‘Power On’ & ‘Alarm’ indicator lights andmute button/switch. Four pin connection for keypad, which enables ease of product installation. External Mounting Brackets Press the Mute button for 3 seconds and the Alarm Light and Buzzer will be activated. ‘Test Feature’ Chirp Mode. If buzzer has automatically silenced, it will enter chirp mode. A chirp every 5 minutes. Alarm LED indicator remains on till alarm condition has been eradicated. Supplied pre wired for high level alarm applications. Simple DIY installation

ZEN-ALARM Deluxe ZCP 375.00

Tank Fill ControllerSimple control provides the means of controlling an automatic 240V pump used to transfer storm water from a collection pit to a storage tank. The system provides for low voltage cabling between the float switch, that is situated in the storage tank and the controller via on IP68 cable connector. When the storage tank is full the controllerinhibits the pump float switch position and a tank full light is luminated.The control is characterised by:IP55 polycarbonate enclosure. 175L x 130W x 80H (mm). 1.75m power cable and three pin plug. 0.75 m power cable and female three pin plug for quick connection of the pump. “Tank Full” indicator light. Low voltage float switch circuitry. Rated for pumps up to 8amps. 5m float switch and counter weight. IP68 cable connector for applications where the float switch cable requires extending. Simple DIY installation

ZEN-INTERCEPTOR ZCP 500.00

CONTROLLERS - 12 MONTH Warranty * Parts and Labour

ZEN-SGRPC Single Standard Grinder Control ZCP 1090.00

ZEN-SGRPCLD Single Lockable Door Grinder Control ZCP 1192.00

ZEN-DGRPC Dual Standard Grinder Control ZCP 1282.00

ZEN-DGRPCLD Dual Lockable Door Grinder Control ZCP 1513.00

Single Pump Controls 240 Volt - 12 MONTH Warranty * Parts and Labour

ZEN-SPC1-A Single Pump Control 240V 2.5-4AMP Overload ZCP 940.00

ZEN-SPC1-B Single Pump Control 240V 4-6AMP Overload ZCP 940.00

ZEN-SPC1-C Single Pump Control 240V 6-10AMP Overload ZCP 940.00

ZEN-SPC1-D Single Pump Control 240V 10-14AMP Overload ZCP 940.00

Option of Controls behind a Lockable Door ZCP 1036.00



PACKAGED PUMP STATIONS - CONTROLLERSSingle Pump Controls 415 Volt - 12 MONTH Warranty * Parts and Labour

ZEN-SPC3-A Single Pump Control 415V 2.5-4AMP Overload ZCP 976.00

ZEN-SPC3-B Single Pump Control 415V 4-6AMP Overload ZCP 976.00

ZEN-SPC3-C Single Pump Control 415V 6-10AMP Overload ZCP 976.00

ZEN-SPC3-D Single Pump Control 415V 10-14AMP Overload ZCP 976.00


IECEX Intrinsically Safe OptionIECEX OPTION SINGLE PANEL WITH 2 FLOATPump and Alarm Operation. Only Available in Lockable Door Version. Cost is additional

ZCP 715.00

Dual Pump Controls 240 Volt - 12 MONTH Warranty * Parts and Labour

ZEN-DPC1-A Dual Pump Control 240V 2.5-4AMP Overload ZCP 1095.00

ZEN-DPC1-B Dual Pump Control 240V 4-6AMP Overload ZCP 1095.00

ZEN-DPC1-C Dual Pump Control 240V 6-10AMP Overload ZCP 1095.00

ZEN-DPC1-D Dual Pump Control 240V 10-14AMP Overload ZCP 1095.00


Dual Pump Controls 415 Volt - 12 MONTH Warranty * Parts and Labour

ZEN-DPC3-A Dual Pump Control 415V 2.5-4AMP Overload ZCP 1143.00

ZEN-DPC3-B Dual Pump Control 415V 4-6AMP Overload ZCP 1143.00

ZEN-DPC3-C Dual Pump Control 415V 6-10AMP Overload ZCP 1143.00

ZEN-DPC3-D Dual Pump Control 415V 10-14AMP Overload ZCP 1143.00


IECEX Intrinsically Safe OptionIECEX OPTION DUAL PANEL WITH 3 FLOATPump and Alarm Operation. Only Available in Lockable Door Version. Cost is additional

ZCP 952.00

ACCESSORIES

BIA-SK12(5M) 5m Float Switch 10A with HO5 Neoprene Cable BIA 14.00

BIA-SK12(10M) 10m Float Switch 10A with HO5 Neoprene Cable BIA 22.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





PACKAGED PUMP STATIONS - AUXILIARY EQUIPMENT

A unique feature of the Single and Dual Pump Control is the coded Data Output, which can be utilized to provide a signal to a remote, compatible device such as the BMS module, Remote Status Indicator or SMS Alarm Sender.

BMS

The coded signal, derived from the micro processor, is conveyed through a low voltage, 2 wire connection and then decoded by the BMS module. Once the signal is decoded the micro controller provides four voltage free relayoutputs for interfacing with a computer or other monitoring equipment. The module operates on 9-12V ac/dc and issupplied complete with power pack.WiringTwo core communication cable. Distance between the pump controller and BMS Module – up to 150mKit Includes: BMS Control Card, Power Pack, Polycarbonate Enclosure with clear lid

ZEN-BMS Building Management System ZCP 310.00

RSI

The coded signal, derived from the micro processor, is conveyed through a low voltage, 2 wire connection and then decoded by the Remote Status Indicator. Once the signal is decoded the micro controller provides four outputs to LED’s and a buzzer mounted on the circuit board. SINGLE - Conditions displayed include power on, high level and pump 1 fault. DUAL - Conditions displayed include power on, high level, pump 1 fault and pump 2 fault.The indoor indicator is mounted on an attractive wall plate, which incorporates the four indicator lights, the buzzer and mute button. As soon as an alarm condition occurs at the pump station, the appropriate LED on the indicator is illuminated and the buzzer starts to sound. The buzzer will automatically silence after 5 minutes. The buzzer can also be muted by way of the mute button. The alarm light will remain illuminated until the fault condition is remedied.WiringTwo core communication cable. Distance between the pump controller and RSI – up to 150mKit Includes: Mounting Plate, PCB, Plaster Bracket, Mounting screws

ZEN-RSI Remote Status Indicator ZCP 220.00

SMS

The coded signal, derived from the micro processor, is conveyed through a low voltage, 2 wire connection and then decoded by the BMS unit. Once the signal is decoded the micro controller provides four inputs to the GSM modem which then in turn sends SMS messages as configured. Features Up to 5 separate phone numbers to send messages to. Sending of a descriptive message whenever an alarm condition is initiated or cleared. Sending of alert message if backup battery voltage drops too low.Kit includes: GSM modem (preconfigured with supplied phone numbers and SIM code)Antenna to suit, 1.7Ah or 3Ah SLA battery, 12V Power supply / battery charger

ZEN-SMS SMS Alarm Sender ZCP 2960.00

Note: Base packages listed we can build to special specifications upon requests. ie: Special builds, Hour Run Meters, VSD & Triplex.

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




ZENIT BLUE SERIESIECEX approved BLUE pumps are being phased in and superseding earlier models. Please check availability.VMG Models are non IECEXVMEX Models are IECEX Single Phase without float switch moduleVMGEX Models are IECEX Single Phase with float switch moduleVTEX Models are IECEX Three Phase without float switch moduleMAKE SURE YOUR PUMPS CARRY THE INTERNATIONAL CERTIFICATION

DR BLUE SERIES - Open multi-vane fully submerged impellerDR Blue series of submersible drainage pumps for domestic and professional use. DR (DRENO) version with multi-vane fully submerged plastic impeller for efficient operation. Float switch standard on single-phase versions. 10m power lead (with 3 pin plug on single-phase pumps). Suits outdoor installations. Patented sealing system incorporating dual silicon carbide / graphite alumina mechanical seals in oil bath. Longer seal life. Anti-stressing system for power cable. Reduces cable damage and water entry. Cable holder grommet built into handle. Allows adjustment of float switch cable length. Cast iron pump body. For durability. Suction screen. To keep out hard solids.Ergonomic plastic carry handle. For safety and comfort.2 YEAR ZENIT BLUE SERIES PUMP WARRANTY * Parts and labour

ZEN-DRBLUE40/2/G32VMG

0.30kW, 0.40hp 240V with float switch, max 7m/hd, 210l/min ZDP 529.00

ZEN-DRBLUE50/2/G32VMEX

0.37kW, 0.50hp, 240V without float switch, max 9.5m/hd, 240l/min ZDP 551.00


0.37kW, 0.50hp 240V with float switch, max 9.5m/hd, 240l/min ZDP 588.00

ZEN-DRBLUE50/2/G32VMGEX

0.37kW, 0.50hp, 240V with separate float switch module, max 9.5m/hd, 240 l/min ZDP 1088.00


0.55kW, 0.75hp, 240V without float switch, max 12m/hd, 300l/min ZDP 629.00


0.55kW, 0.75hp 240V with float switch, max 12m/hd, 300l/m ZDP 667.00


0.55kW, 0.75hp, 240V with separate float switch module, max 12m/hd, 300l/min ZDP 1167.00







DG BLUE SERIES - Vortex recessed impellerDG Blue series series of submersible vortex pumps for domestic and professional use. DG (DRAGA) version with vortex recessed plastic impeller to pass soft solids to 35mm diameter. Float switch standard on single-phase versions. 10 m power lead (with 3 pin plug on single-phase pumps). Suits outdoor installations. Patented sealing system incorporating dual silicon carbide / graphite alumina mechanical seals in oil bath. Longer seal life. Anti-stressing system for power cable. Reduces cable damage and water entry. Cable holder grommet built into handle.Allows adjustment of float switch cable length. Cast iron pump body. For durability. Cast Iron support base. Assists in the passage of soft solids to 35mm. Ergonomic plastic carry handle. For safety and comfort.2 YEAR ZENIT BLUE SERIES PUMP WARRANTY * Parts and labour

ZEN-DGBLUE40/2/G40VMG



0.37kW, 0.50hp 240V with float switch, max 7.8m/hd, 290l/m ZDP 647.00





WARNING - DON’T GET BURNT BY UNCERTIFIED PUMPSELECTRICALLY APPROVED SUBMERSIBLE PUMPS




ZENIT BLUE PROFESSIONAL SERIESIECEX approved BLUE pumps are being phased in and superseding earlier models. Please check availability.VMG Models are non IECEXVMEX Models are IECEX Single Phase without float switch moduleVMGEX Models are IECEX Single Phase with float switch moduleVTEX Models are IECEX Three Phase without float switch moduleMAKE SURE YOUR PUMPS CARRY THE INTERNATIONAL CERTIFICATION

DR BLUE PROFESSIONAL SERIES - Open multi-vane fully submerged impellerNew series of submersible drainage pumps for industrial/commercial and professional use. DR (DRENO) version with multi-vane fully submerged cast iron impeller for efficient operation. Float switch standard on single-phase versions.10 m power lead (with 3 pin plug on single-phase pumps). Suits outdoor installations. Patented sealing system incorporating dual silicon carbide / graphite alumina mechanical seals in oil bath. Longer seal life. Anti-stressing system for power cable. Reduces cable damage and water entry. Cable holder grommet built into handle. Allows adjustment of float switch cable length. Cast iron pump body. For durability. Suction screen. To keep out hard solids.Aluminium handle suction strainer stainless steel. Built in Air Bleed.2 YEAR ZENIT BLUE SERIES PUMP WARRANTY * Parts and labour

ZEN-DRBLUEP150/2/G50VMEX


ZEN-DRBLUEP150/2/G50VMG


ZEN-DRBLUEP150/2/G50VMGEX

1.1kW, 1.5hp, 240V with separate float switch module, max 14.4m/hd, 600l/min ZDP 1555.00

ZEN-DRBLUEP150/2/G50VTEX


ZEN-DRBLUEP200/2/G50VMEX


ZEN-DRBLUEP200/2/G50VMG


ZEN-DRBLUEP200/2/G50VMGEX


ZEN-DRBLUEP200/2/G50VTEX

1.5kW, 2.0hp, 415V without float switch max 17m/hd,690l/min ZDP 1333.00

DG BLUE PROFESSIONAL SERIES - VORTEX PUMPSNew series of submersible vortex pumps for industrial / commercial and professional use. DG (DRAGA) version with vortex recessed cast iron impeller to pass soft solids to 35mm diameter. Float switch standard on single-phase versions.10m power lead (with 3 pin plug on single-phase pumps). Suits outdoor installations. Patented sealing system incorporating dual silicon carbide / graphite alumina mechanical seals in oil bath. Longer seal life. Anti-stressing system for power cable. Reduces cable damage and water entry. Cable holder grommet built into handle. Allows adjustment of float switch cable length. Cast iron pump body. For durability. Cast Iron support base. Assists in the passage of soft solids to 35mm. Aluminium handle suction strainer stainless steel. Built in Air Bleed2 YEAR ZENIT BLUE SERIES PUMP WARRANTY * Parts and labour

ZEN-DGBLUEP150/2/G50VMEX

1.1kW, 1.5hp 240V without float switch, max 12.3m/hd, 600l/m ZDP 1223.00

ZEN-DGBLUEP150/2/G50VMG


ZEN-DGBLUEP150/2/G50VMGEX

1.1kW, 1.5hp 240V with seperate float switch module, max 12.3m/hd, 600l/m ZDP 1640.00

ZEN-DGBLUEP150/2/G50VTEX


ZEN-DGBLUEP200/2/G50VMEX


ZEN-DGBLUEP200/2/G50VMG


ZEN-DGBLUEP200/2/G50VMGEX


ZEN-DGBLUEP200/2/G50VTEX


ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




ZENIT BLUE PROFESSIONAL SERIES

IECEX approved BLUE pumps are being phased in and superseding earlier models. Please check availability.HMEX Models are IECEX Single Phase without float switch moduleHMGEX Models are IECEX Single Phase with float switch moduleHTEX Models are IECEX Three Phase without float switch moduleMAKE SURE YOUR PUMPS CARRY THE INTERNATIONAL CERTIFICATION

GR BLUE PROFESSIONAL SERIES - GRINDER PUMPSSubmersible electric pumps with high head cast iron impeller and cutter, with 69,000 cuts per minute. The GR Models are equipped with an intake cutting system composed of a steel plate and a triangular rotary cutter. The system fibres and stringy bodies and assures smooth pump functioning. 10m power lead (with 3 pin plug on single-phase pumps). Suits outdoor installations. Patented sealing system incorporating dual silicon carbide / graphite alumina mechanical seals in oil bath. Longer seal life. Anti-stressing system for power cable. Reduces cable damage and water entry. Cable holder grommet built into handle. Allows adjustment of float switch cable length. Cast iron pump body. For durability. Cast Iron support base. Assists in the passage of soft solids to 35mm. Ergonomic metallic carry handle. For safety and comfort.2 YEAR ZENIT BLUE SERIES PUMP WARRANTY * Parts and labour

ZEN-GRBLUEP100/2/G40HMEX


ZEN-GRBLUEP100/2/G40HMG


ZEN-GRBLUEP100/2/G40HMGEX


ZEN-GRBLUEP100/2/G40HTEX


















WARNING - DON’T GET BURNT BY UNCERTIFIED PUMPS!ELECTRICALLY APPROVED SUBMERSIBLE PUMPS

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





ZENIT BLUE PROFESSIONAL SERIESAP BLUE PROFESSIONAL SERIES - HIGH HEADSubmersible electric pumps with high head cast iron impeller. The AP models can be used in treatment of slightly soiled waters with small solid bodies. The intake strainer allows free passage up to 7mm. 10m power lead (with 3 pin plug on single-phase pumps). Flanged and threaded delivery outlet for maximum installation versatility. Suits outdoor installations. Patented sealing system incorporating dual silicon carbide / graphite alumina mechanical seals in oil bath. Longer seal life. Anti-stressing system for power cable. Reduces cable damage and water entry. Cable holder grommet built into handle. Allows adjustment of float switch cable length. Cast iron pump body. For durability. Cast Iron support base. Ergonomic metallic carry handle. For safety and comfort.2 YEAR ZENIT BLUE SERIES PUMP WARRANTY * Parts and labourMAKE SURE YOUR PUMPS CARRY THE INTERNATIONAL CERTIFICATION

ZEN-APBLUEP100/2/G40HMEX


ZEN-APBLUEP100/2/G40HMG


ZEN-APBLUEP100/2/G40HMGEX


ZEN-APBLUEP100/2/G40HTEX


















DRE DRAINAGEDRE DRAINAGE HORIZONTAL OUTLETHeavy duty cast iron submersible drainage pumps suitable for domestic and industrial applications. These pumps can be installed in underground car parks to pump water and oily substances. These pumps are ideal for pumping clean water or dirty water without solids, are easy to install and are equipped with our without float switches. Ecological dry motor. Open multi channel cast iron impeller. Free passage 10x20mm. 240V or 415V pumps with vertical or horizontal outlets. 10m H07RN-F power cable. Silcon carbide seals standard.12 Months ZENIT PUMP Warranty * Parts and Labour

ZEN-DRE100/2/G50HMGSIC 0.88kW, 1.2hp 240V with float switch, max 12.5m/hd, 540l/m ZDP 1073.00

ZEN-DRE200/2/G50HMGSIC 1.5kW, 2.0hp 240V with float switch, max 18.1m/hd, 720l/m ZDP 1538.00

ZEN-DRE100/2/G50HMSIC 0.88kW, 1.2hp 240V without float switch, max 12.5m/hd, 540l/m ZDP 1050.00

ZEN-DRE200/2/G50HMSIC 1.5kW, 2.0hp 240V without float switch, max 18.1m/hd, 720l/m ZDP 1516.00

ZEN-DRE100/2/G50HTSIC 0.88kW, 1.2hp 415V without float switch, max 12.5m/hd, 540l/m ZDP 1073.00

ZEN-DRE200/2/G50HTSIC 1.5kW, 2.0hp 415V without float switch, max 18.1m/hd, 720l/m ZDP 1538.00



DGE ‘VORTEX’DGE ‘VORTEX’ HORIZONTAL OUTLETHeavy duty cast iron submersible vortex pumps suitable for domestic and industrial applications. These pumps can be installed in underground car parks to pump water and oily substances. These pumps are ideal for pumping clean water or dirty water with solids up to 35mm such as pits and sewers. Easy to install and are equipped with our without float switches. Recessed vortex type cast iron impeller. Ecological dry motor 240V or 415V pumps with vertical or horizontal outlets 10m H07RN-F power cable. Silcon carbide seals standard.12 Months ZENIT PUMP Warranty * Parts and Labour

ZEN-DGE50/2/G50HMGSIC 0.37kW, 0.5hp 240V with float switch max 6.0m/hd, 240l/m ZDP 935.00




ZEN-DGE50/2/G50HMSIC 0.37kW, 0.5hp 240V without float switch max 6.0m/hd, 240l/m ZDP 914.00




ZEN-DGE100/2/G50HTSIC 0.88kW, 1.2hp 415V without float switch max 12.5m/hd, 480l/m ZDP 1205.00

ZEN-DGE200/2/G50HTSIC 1.5kW, 2.0hp 415V without float switch max 15.5m/hd, 600l/m ZDP 1637.00

HEAVY DUTY CAST IRON SUMBERSIBLE DRAINAGE AND SEWAGE PUMPS suitable for commercial applications.DRN / DRP DRAINAGE - 12 Months ZENIT PUMP Warranty * Parts and Labour

shown with ring stand

DRN - Electromechanical assembly in EN-GJL-25 cast iron. 2 (two) opposing silicon carbide mechanical seals in inspectable oil sump. Ecological dry motor. Sensor for detecting damage to the mechanical seals (optional). Designed for mainly professional and industrial use such as wastewater treatment plants, sewage systems andlivestock farms, it is particularly suitable for the treatment of liquids containing suspended solids and low or medium density activated sludges. These models are prefitted for installation of the ZENIT cooling system, for dry or semi-submerged installation (on request).DRP - Electromechanical assembly in EN-GJL-25 cast iron. Seal set comprising 2 (two) silicon carbide mechanical seals installed in series in inspectable oil sump and 1 (one) opposed graphite alumina mechanical seal lubricated by the motor oil. Oil bath motor. Designed to transport heavily soiled wastewater, activated sludges and solids. Particularly suitable for applications in wastewater treatment, sewer systems, civil lifting systems and the paper, tanning and leather industries.

ZEN-DRN300/2/65T 2.2kW, 3.0hp 415V without float switch, max 19.4m/hd, 1440l/m (See Note 1) ZIP 1749.00






ZEN-DRP750/2/80T 7.2kW, 9.6hp 415V without float switch, max 23.6m/hd, 2400l/m ZIP 3979.00

ZENS9024.006 RING STAND ZIP 67.00

Note 1 - requires ZENS9024.006 Ring Stand for free standing operation




GRN - GRINDER


Heavy duty cast iron submersible grinder pumps suitable for commercial applications. Grinding system can finely chop solids and fibres even under heavy duty conditions. This model has been redesigned featuring new electrical and mechanical parameters to optimise efficiency and reliability even under particularly heavy duty operationconditions. Pair of oblique ball bearings, are sized to guarantee 20,000 hours of operation. Two opposite mechanical seals both located in the oil sump. A special threaded bushing enables quick maintenance. Cable clamp with GAS thread, set up for cable ducting. 10m H07RN-F power cable. IP68 protection. 12 Months ZENIT PUMP Warranty * Parts and Labour

ZEN-GRN250/2/G40HT 1.8kW, 2.4hp 415V without float switch, max 27.5m/hd, 360l/m (See Note 1) ZIP 2061.00






MAC MONO-CHANNEL - ANTI-CLOGGING - 12 Months ZENIT PUMP Warranty * Parts and Labour


MAN - Electromechanical assembly in EN-GJL-25 cast iron. 2 (two) opposing silicon carbide mechanical seals in inspectable oil sump. Ecological dry motor. Sensor for detecting damage to the mechanical seals (optional). Used with unstrained soiled biological wastewaters and sewage and for civil lifting applications. It is thus ideal for wastewater treatment plants, sewer systems, livestock farms, industry and agriculture. This series is prefitted for installation of the ZENIT cooling system for dry or semi-submerged installation.

ZEN-MAN300/2/65T 2.2kW, 3.0hp 415V without float switch, max 20.6m/hd, 900l/m (See Note 1) ZIP 1853.00


ZEN-MAN400/2/80T 3.0kW, 4.0hp 415V, max 21.m/hd, 1260I/m (See Note 1) ZIP 2514.00




ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




AP HIGH HEADAPN - Electromechanical assembly in GJL-250 cast iron, for submerged operation. Seal set comprising 2 (two) opposing silicon carbide mechanical seals in inspectable oil sump. Ecological dry motor. Separate pump body. Suitable for clear wastewater, rainwater and seepage. The considerable manometric head guarantees excellent results for the creation of water features and decorative fountains; suitable for use in agriculture, irrigation and the fish processing sector. This series is prefitted for installation of the ZENIT cooling system for dry or semi-submerged installation.APP - Electromechanical assembly in GJL-250 cast iron, for submerged operation. Seal set comprising 2 (two) silicon carbide mechanical seals installed in series in inspectable oil sump and 1 (one) opposed graphite-alumina lip seal lubricated by the motor oil. Oil bath motor. Separate pump body. Used for clear wastewater, rainwater and seepage. The considerable manometric head guarantees excellent results for the creation of water features and decorative fountains; suitable for use in agriculture, irrigation and the fish processing sector.

ZEN-APN300/2/G50HT 2.2kW, 3.0hp 415V without float switch, max 25.7m/hd, 600l/m (See Note 1) ZIP 1990.00



ZEN-APP750/2/G50HT 7.2kW, 9.5hp 415V without float switch, max 52.0m/hd, 660l/m ZIP 4276.00



ACCESSORIES

NRVBALL50

BALL VALVE

CF50V

DAB-DSD2 Lifting Device Kit ZDP 349.00

ZEN-CFBALL50V Coupling Device C/W Ball NRV and Bleed, Vertical Outlet ZDP 607.00

ZEN-CF50V Coupling Device with Vertical Outlet ZDP 451.00

ZEN-CF65 Coupling Device with Vertical Outlet ZDP 633.00

ZEN-CF80 Coupling Device with Vertical Outlet ZDP 715.00

ZEN-NRVBALL32 Ball Type Non-Return Valve ZDP 175.00





ZEN-CABLE2G1 Cable H07 RNF ZDP 11.00

ZEN-CABLE3G1 Cable H07 RNF ZDP 7.00

ZEN-CABLE4G1.5 Cable H07 RNF ZDP 9.00

ZEN-CABLE4G1.5+3G0.75 Cable H07 RNF ZDP 18.00

ZEN-CABLE7G1.5+3G0.75 Cable H07 RNF ZDP 30.00

ZEN-PN16-2 Flange 2” PN10 ZDP 67.00

ZEN-PN16-2.5 Flange 2-1/2” PN10 ZDP 78.00

ZEN-PN16-3 Flange 3” PN10 ZDP 101.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





RAINWATER HARVESTING SYSTEMSRAINSAVER 3Control features• Revolutionary Patented design, no mechanisms• Requires no power supply and consumes NO electrical energy• Designed to operate with pumps up to 800kpa (116psi)• 100 litres per minute flow for large homes and commercial applications• Aesthetically designed and requires no weather proofing• Can be mounted any distance from the pump underground or inside a tank• Barrel unions and “Torque Set” safety spanner are included to facilitate ease of servicing and to avoid tool damage or over tightening• Completely waterproof can be hosed down without the fear of electrocution• UV stabilized technopolymer for long life and good looks• All Rainsaver MKIII pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart• WATERMARK approved for connection to all Town Water supplies. Safe against, water borne bacteria, dezincification and lead poisoning• Auxiliary outlet allows for “energy saver” water storage – pressure vessels to reduce pump starts• No unsightly controller power, water level float cables or the need for a dedicated controller power point• Revolutionary “Mono Channel” design does not restrict flow or reduce pressures, eliminates any possibility of water leaks• Easy to clean, pump and town water inlet strainers are included to prevent blockages in dishwashers, washing machines, sprinklers etc.• Australian owned and designed• 4 Year Rainsaver MKIII Infield WarrantyWatermark approval only applies to the Bianco Rainsaver MKIII controlNote: Pumps and controls are not to be sold separately.

SURFACE MOUNTED PUMP PACKAGES - All pumps are fitted with a 10m low level float kit

RS3-INOX60PCA

Rainsaver MKIII & BIA-INOX60PCA Stainless Steel Electronic Pump with Auto Restart, 4 Taps, 320kPa, 36l/min. Barcode: 93121988497834 Year Rainsaver MKIII Infield Warranty

RAI 618.00

RS3-MULTI900PCA

Rainsaver MKIII & BIA-MULTI900PCAStainless Steel Multistage Electronic Pump with Auto Restart, 9 Taps, 352kPa, 80l/min. Barcode: 93121988497904 Year Rainsaver MKIII Infield Warranty

RAI 760.00

Note: (Bianco Pressure Systems) Taps shown above have been calculated at 8 litres per minute

RS3-JETCOM82MAPCX

Rainsaver MKIII & DAB-JETCOM82MAPCXTechnopolymer Electronic Pump with Auto Restart, 6 Taps, 460kPa, 60l/min. Barcode: 93121988496224 Year Rainsaver MKIII Infield Warranty

RAI 789.00

RS3-JINOX82MAPCX

Rainsaver MKIII & DAB-JINOX82MAPCXStainless Steel Electronic Pump with Auto Restart, 6 Taps, 460kPa, 60l/min. Barcode: 93121988496534 Year Rainsaver MKIII Infield Warranty

RAI 889.00

RS3-EUROINOX30/50MAPCX

Rainsaver MKIII & DAB-EUROINOX30/50MAPCXStainless Steel Horizontal Multistage Electronic Pump with Auto Restart, 8 Taps, 413kPa, 80l/min. Barcode: 93121988496914 Year Rainsaver MKIII Infield Warranty

RAI 1109.00

RS3-EUROINOX40/80MAPCX

Rainsaver MKIII & DAB-EUROINOX40/80MAPCXStainless Steel Horizontal Multistage Electronic Pump with Auto Restart, 12 Taps, 577kPa, 120l/min. Barcode: 93121988497074 Year Rainsaver MKIII Infield Warranty

RAI 1329.00

Note: (DAB Pressure Systems) Taps shown above have been calculated at 10 litres per minute



SUBMERSIBLE PUMP PACKAGES - All pumps incorporate low level protection

JH8003PMPCX

JH8003PMPCXBP

DIVER 6 DIVERTRON

DIVER75MAPCX

RS3-JH8003PMPCX

Rainsaver MKIII, Pump Controller & BIA-JH8003PMPCX High Head Submersible Clean Water Pump. Automatic Rainwater/Mains Water Changeover Device and Auto Restart Pump Controller. 8 Taps, 295kpa, 80l/min, 10m power cableBarcode: 93121988497144 Year Rainsaver MKIII Infield Warranty

RAI 748.00

RS3-JH8003PMPCXBP

Rainsaver MKIII, Pump Controller & BIA-JH8003PMPCX High Head Submersible Clean Water Pump. Automatic Rainwater/Mains Water Changeover Device and Auto Restart Pump Controller is mounted in a galvanised enclosure with easy access cover.8 Taps, 295kpa, 80l/min, 10m power cableBarcode: 93121988552654 Year Rainsaver MKIII Infield Warranty

RAI 748.00

RS3-DIVER6-700MAPCX

Rainsaver MKIII & DAB-DIVER6-700MAPCXHigh Head Submersible Clean Water PumpElectronic Pump with Auto Restart, Stainless Steel Cover8 Taps, 340kpa, 80l/min, 15m power cableBarcode: 93121988555794 Year Rainsaver MKIII Infield Warranty

RAI 870.00

RS3-DIVER6-700MAPCXBP

Rainsaver MKIII, Pump Controller & DAB-DIVER6-700MAPCXHigh Head Submersible Clean Water Pump. Automatic Rainwater/Mains Water Changeover Device and Auto Restart Pump Controller is mounted in a galvanised enclosure with easy access cover. 8 Taps, 340kpa, 80l/min, 15m power cableBarcode: 93121988555864 Year Rainsaver MKIII Infield Warranty

RAI 870.00

RS3-DIVERTRON1200

Rainsaver MKIII & DAB DIVERTRON1200Multistage technopolymer submersible pump Electronic Pump with Auto Restart9 Taps, 470kpa, 95l/min, 15m power cableBarcode: 93121988550054 Year Rainsaver MKIII Infield Warranty

RAI 990.00

RS3-DIVER75MAPCX

Rainsaver MKIII & TES-DIVER75MAPCXMultistage Stainless Steel Submersible Pump. Electronic Pump withAuto Restart. 8 Taps. 340kpa, 80l/min, 10m power cableBarcode: 93121988497214 Year Rainsaver MKIII Infield Warranty

RAI 1090.00

ACCESSORIES

RS3-BLADDERFLOATACElectronic Float Switch for 240V ACIncludes 10m lead and connector for RS3 surface mounted pumps

RAI 190.00

Note: (Bianco Pressure Systems) Taps shown above have been calculated at 8 litres per minute Note: (DAB Pressure Systems) Taps shown above have been calculated at 10 litres per minute

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





RAINSAVER MK3EControl features• Revolutionary design• Designed to operate with pumps up to 800kpa (116psi)• 100 litres per minute flow for large homes and commercial applications• Aesthetically designed and requires no weather proofing• Barrel unions and “Torque Set” safety spanner are included to facilitate ease of servicing and to avoid tool damage or over tightening• UV stabilized technopolymer for long life and good looks• All Rainsaver MKIIIE pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart• WATERMARK approved for connection to all Town Water supplies. Safe against, water borne bacteria, dezincification and lead poisoning• Auxiliary outlet allows for “energy saver” water storage – pressure vessels to reduce pump starts• Revolutionary “Mono Channel” design does not restrict flow or reduce pressures, eliminates any possibility of water leaks• Easy to clean, pump and town water inlet strainers are included to prevent blockages in dishwashers, washing machines, sprinklers etc.• Australian owned and designed• 4 Year Rainsaver MKIIIE Infield Warranty - applies to Rainsaver Controls only• 2 Year Warranty applies to all pumpsWatermark approval only applies to the Bianco Rainsaver MKIIIE controlCan be purchased separately and fitted to any brand of independently controlled, electronic or pressure switchoperated pump. Controls pumps to a maximum: 1.5hp, 1.1kW, 240V. Low voltage float switch output 12V. Low voltage float switch cable 10m. IP44 rated. Power lead 2m. Watermark Level 1 certification to ATS5200.477:2006

BIA-RAINSAVERMK3ERainsaver MKIIIe Changeover Device. Barcode: 93121988549854 Year Rainsaver MKIIIE Infield Warranty

RAI 363.00

CONVERSION KIT

Comprises of: Rainsaver MKIIIe, BIA-SK10AX, Automatic Pump Controller with Auto Restart, Replaces changeover devices including Davey Rainbank and Onga Waterswitch. Suitable for mains and pump flows to 100 litres per minute. Suitable for mains and pump pressures to 800kPa. Suitable for pumps to 1.1kW, 240V. Plug & Play connection, Low Voltage Float switch for safety 4 Year In-Field Warranty (Control Only)

BIA-RS3ESK10ARainsaver MKIIIE Conversion Kit. Barcode: 93121988552274 Year Rainsaver MKIIIE Infield Warranty

RAI 499.00

ALL IN ONE PUMP CONTROL PACKAGE

RS3E-ALLINONE60PC

Rainsaver MKIIIE All-In-OneRainsaverMKIIIe Changeover Device, Pump Cover & BIA-INOX60PC, Stainless Steel Electronic Pump. 4 Taps, 320kPa, 36l/min. Auto Restart. Barcode: 93121988552344 Year Rainsaver MKIIIE Infield Warranty

RAI 999.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




MK3e SURFACE MOUNTED PUMP PACKAGES

RS3E-TECH40PC

Rainsaver MKIIIE & BIA-TECH40PCTechnopolymer Electronic Pump with Auto Restart, 3 Taps, 270kPa, 25l/min. Barcode: 93121988555004 Year Rainsaver MKIIIE Infield Warranty

RAI 549.00

RS3E-INOX60PC

Rainsaver MKIIIE & BIA-INOX60PCAStainless Steel Electronic Pump with Auto Restart, 4 Taps, 320kPa, 36l/min. Barcode: 93121988555174 Year Rainsaver MKIIIE Infield Warranty

RAI 608.00

RS3E-MULTI900PC

Rainsaver MKIIIE & BIA-MULTI900PCAStainless Steel Multistage Electronic Pump with Auto Restart, 9 Taps, 352kPa, 80l/min. Barcode: 93121988555244 Year Rainsaver MKIIIE Infield Warranty

RAI 750.00

RS3E-JETCOM82MPCX

Rainsaver MKIIIE & DAB-JETCOM82MPCXTechnopolymer Electronic Pump with Auto Restart6 Taps, 460kPa, 60l/min. Barcode: 93121988555314 Year Rainsaver MKIIIE Infield Warranty

RAI 779.00

RS3E-JINOX82MPCX

Rainsaver MKIIIE & DAB-JINOX82MPCXTechnopolymer Electronic Pump with Auto Restart6 Taps, 460kPa, 60l/min. Barcode: 93121988555484 Year Rainsaver MKIIIE Infield Warranty

RAI 879.00

RS3E-EUROINOX30/50MPCX

Rainsaver MKIIIE & DAB-EUROINOX30/50MPCXStainless Steel Horizontal Multistage Electronic Pumpwith Auto Restart8 Taps, 413kPa, 80l/min. Barcode: 93121988555554 Year Rainsaver MKIIIE Infield Warranty

RAI 1099.00

RS3E-EUROINOX40/80MPCX

Rainsaver MKIIIE & DAB-EUROINOX40/80MPCXStainless Steel Horizontal Multistage Electronic Pumpwith Auto Restart12 Taps, 577kPa, 120l/min. Barcode: 93121988555624 Year Rainsaver MKIIIE Infield Warranty

RAI 1319.00

ACCESSORIES

RS3E-10MEXT 10m low voltage float switch extension lead - Includes Scotchlok joiners to connect to existing float switch RAI 19.00

RS3E-FINGERMechanical finger float low voltage (side entry) for MKIIIE - Includes Scotchlok joiners to connect to existing float switch

RAI 59.00

RS3E-BLADDERFLOATDC Electronic Float Switch low voltage for MKIIIE - Includes 10m lead to connect to MKIIIE RAI 180.00

Note: (Bianco Pressure Systems) Taps shown above have been calculated at 8 litres per minute Note: (DAB Pressure Systems) Taps shown above have been calculated at 10 litres per minute




DIVER PUMPS- AS/NZS4020 approved for drinking waterMultistage Submersible Pumps. Unsurpassed for quality and performance, Diver pumps are designed to operate in the harshest of environments totally weather and frost proof to supply clean water quality and efficiently. Manufactured almost entirely of stainless steel, the Diver range of submersible multistage pumps are totally silent and visually unobtrusive which makes the Diver pump range ideal as household pressure systems, irrigation in aerated treatment systems and can be controlled electronically or and on/off switch and external capacitor for added reliability and are also available with or without float switch for automatic level control or dry run protection.Special features: • Stainless steel shaft for high corrosion resistance • Through body motor cooling • Specially designed algae resistant suction strainer • Silicon carbide mechanical seal • Flows from 10 to 80 litres per minute12 MONTH WARRANTY

M/MAAS/NZS4020 approved for

drinking water

MHF/MHFAAS/NZS4020 approved for

drinking water

TES-DIVER75M Manual, 240V, 0.55kW inc. Control Box, Heads to 35m, Flows to 80l/m TES 857.00

TES-DIVER75MA Auto, 240V, 0.55kW inc. Control Box, Heads to 35m, Flows to 80l/m TES 918.00





TES-DIVER200M Manual, 240V, 1.5kW inc. Control Box, Heads to 95m, Flows to 80l/min TES 1244.00

TES-DIVER150MHF Manual, 240V, 1.1kW inc. Control Box, Heads to 42m, Flows to 200l/m TES 1132.00

TES-DIVER150MHFA Auto, 240V, 1.1kW inc. Control Box, Heads to 42m, Flows to 200l/m TES 1185.00

TES-DIVER200MHF Manual, 240V, 1.5kW inc. Control Box, Heads to 58m, Flows to 200l/m TES 1368.00

TESLA POWER CABLES

TES-CABLE100M20M 20m Power Cable no float TES 163.00

TES-CABLE100MG20M 20m Power Cable with float TES 249.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




AUTOMATIC PRESSURE SYSTEMSTECHNOPOLYMER AUTOMATIC PRESSURE SYSTEM

Fully Electronic, Comfortable Showers, Auto Restart, Automatically restarts after water loss or interrupted power. Dry Run Protection, Protects Pump from Damage, Eliminates Water Hammer, Protects Plumbing. Pre Assembled compact size for easy installation. Technopolymer Pressure System, 2 Year Bianco Pumpz Warranty

BIA-TECH40PC400W, 240V, Electronic Control, flows to 25l/m, heads to 27m, 2 to 3 TAPS(calculated at 8l/m). Barcode: 9312198842418

BIA 249.00

STAINLESS STEEL AUTOMATIC PRESSURE SYSTEMS - AS/NZS4020 approved for drinking water


Fully Electronic, Comfortable Showers, Auto Restart, Automatically restarts after water loss or interrupted power. Dry Run Protection, Protects Pump from Damage Eliminates Water Hammer, Protects Plumbing. Pre Assembled compact size for easy installation. Stainless Steel Pressure System, 2 Year Bianco Pumpz Warranty

BIA-INOX60PC 600W, 240V, Electronic Control, flows to 36l/m, heads to 32m, 3 to 4 TAPS Barcode: 9312198832419 BIA 319.00



Note: The taps mentioned above have been calculated at 8l/m

HORIZONTAL MULTISTAGE Pressure System Pumps - AS/NZS4020 approved for drinking water


Self Priming. Starts automatically when a tap is turned on. Operates constantly from low flow to full flow. Stops automatically when the last tap is turned off. Run dry protection. Corrosion resistant stainless steel construction. Auto restart controller, automatically looks for water if pump runs out of water. Ideal for: domestic water supply for holiday homes and cottages, irrigation and car washing General water transfer systems. Pressures up to 548kPa (80psi) 2 Year Bianco Pumpz Warranty * Parts and Labour

BIA-MULTI900PC 240V, Electronic Control, flows to 90l/m, heads to 36m, 900W. 9 TAPS Barcode: 9312198849509 BIA 469.00

BIA-MULTI1300PC 240V, Electronic Control, flows to 90l/m, heads to 56m, 1300W. 11 TAPS Barcode: 9312198849523 BIA 519.00

Note: The taps mentioned above have been calculated at 8l/m

PUMP COVERCOVER YOUR PUMPS FROM THE ELEMENTSTo extend the working life of your pump it is recommended that all pumps be covered from the elements.Pump Cover to suit pumps fitted with electronic controllers - DAB or BIANCO Electronic Pumps. Sturdy 2 piece design – base and lid. Base keeps pump off the ground. Cut-out slots for inlet and outlet piping Ventilation holes in base and lid. Lid screw-fixes to base to prevent child tampering. Beige colour. Size: 720L x 420W x 520H (mm)

WHI-PUMPCOVER Pump Cover for Pumps BIA 185.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





SUBMERSIBLE PUMPSDRAINAGE PUMPS - PLASTIC (clean water)Suitable for all de-watering tasks including pumping out sumps, flooded areas and drawing water from wells. Domestic use only. Light and compact, fully automatic operation. Great Value for Money. 10m Cable, Special features: • Simple installation • Instructions included • Light and compact • Fully automatic operation • Great value for money • Supplied complete with 10 metres of electric cable • 12 Months Warranty • Not suitable for construction sites, ponds, fountains or biotreatment.

BIA-JH400 400W, 240V, Plastic Construction, flows to 125l/m, heads to 8m Barcode: 9312198832051 BIA 130.00

BIA-JH40011

Drainage Pump with Internal Float Switch (clean water)Light and compact submersible clean water pump.Supplied wired and ready to install. Ideal for pits confined spaces where floats do not work. Incorporates float on/off switch for manual and automatic level control. The pump has an internal float switch which will not foul and allows for installation in small sumps. (min size 260 x 160 x 330 (mm) deep). When switched to manual mode, thescavenger type base allows pumping down to 5mm. Not suitable for construction sites, ponds, fountains or bio-treatment. Dimensions: 203 x 321mm. 12 Months Warranty 400W, 240V, Plastic Construction, flows to 125l/m, heads to 8m Barcode: 9312198848335

BIA 127.00

BIA-JH900 900W, 240V, Plastic Construction, flows to 225l/m, heads to 9m Barcode: 9312198832075 BIA 165.00

DRAINAGE PUMPS - STAINLESS STEEL

BIA-JH554 550W, 240V, Stainless Steel Construction, flows to 140l/m, heads to 7.5m BIA 183.00

BIA-JH754M 750W, 240V, Stainless Steel Construction, mechanical seal, flows to 180l/m, heads to 8.5m BIA 209.00

‘LIGHT’ CONSTRUCTION - SUBMERSIBLE PUMPSThe pump is characterised by:• Corrosion resistant pump components. • Fully automatic operation. • Dual Mechanical Seal in oil bath, SIC/SIC, Carbon Ceramic. • Eurethane coated semi vortex impeller allows pumping of suspended solids, sandy and stringy material. • Agitator on the end of the pump shaft helps prevent air locking and clogging. • Carry handle. • Versatile outlet connection. • 240V single phase motor with in-built auto reset thermal overload. • 10m of power cable. • 12 months warranty.

BIA-AHS05A Flows to 220, Heads to 12m BIA 591.00

BIA-AHS10A Flows to 350l/m, Heads 18m BIA 684.00

BIA-LAYFLATKIT Lay Flat 20m 2” Hose BIA 180.00



‘VORTEX’ PUMPS(non abrasive liquids with soft solids in suspension ie: leaves and stringy materials) Vortex drainage pumps are designed to pump water with some organic• Light and compact • Fully automatic operationVortex drainage pumps are designed to pump water with some organic. Capable of pumping non-abrasive solids in suspension up to 35mm particle size.Special features:• Simple installation • Instructions included • Great value for money • Handle particles up to 35mm in size• Supplied complete with 10 metres of electric cable • 12 months warranty • Not suitable for construction sites, ponds, fountains or biotreatment

BIA-JH550B 550W, 240V, Plastic Construction, Vortex, flows to 158l/m, heads to 7m Barcode: 9312198832013 BIA 143.00

‘VORTEX’ STAINLESS STEEL PUMPS

BIA-JH554B 550W, 240V, Stainless Steel Construction, flows to 167 l/m, heads to 7m BIA 189.00

BIA-JH754BM 750W, 240V, Stainless Steel Construction, mechanical seal, flows to 216 l/m, heads to 8m BIA 219.00

SUBMERSIBLE PUMPSHIGH HEAD DRAINAGE PUMP (clean water)Light and compact high head submersible clean water pump supplied wired and ready to install. The pump has sufficient pressure to operate as a pressure system pump when wired to a suitable pump controller. 12 Months Warranty. Not suitable for construction sites, ponds, fountains or bio-treatment systems. Designed specifically for drinking water.Special features:High Head, flows to 83 l/m. Corrosion resistant body. Fully automatic operation. Silicon Carbide Mechanical Seal. High Head Pump for rainwater tanks and clean water only. Motor with built in auto reset thermal overload. Supplied complete with10 metres of electrical cable. Dimensions: 164 x 150 x 337 (mm) AS/NZS4020 approved for drinking water

BIA-JH8003P

800W, 240V, High Head, flows to 83l/m, heads to 30m,Corrosion Resistent Body, Fully automatic operation, Silicon Carbide Mechanical Seal, motor with built in auto reset thermal overload, 10m cable. Barcode: 9312198848342

BIA 260.00

PRESSURE SYSTEMHIGH HEAD DRAINAGE PUMP (clean water)


MPCX model includes SK13B prewired and mounted on a stainless steel wall bracket. Complete with cover. AS/NZS4020 approved for drinking water

BIA-JH8003PMPCX

800W, 240V, High Head. flows to 83l/m, heads to30m, Corrosion Resistent Body, Fully automatic operation, Silicon Carbide Mechanical Seal, motor with built in auto reset thermal overload, 10m cable. Barcode: 9312198848861

BIA 599.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





POOL RANGEPOOL PUMPS

BIA-FCP370S

BIA-FCP1100S

The BIANCO range of pool pumps provides strong and quiet pumping performance in a compact, easy to install package.• Self priming for ease of use. • Constructed of strong corrosion and U.V. resistant materials for long and reliable working life. • Powerful pumping performance delivers flow rates for rapid water turnover. • Easy to remove, see through strainer lid allowing easy removal of debris. • Large strainer basket allows long intervals between cleaning.• 2m power lead with 10amp Australian three pin plug fitted to all models. • Drain plug enables pump casing to be drained for easy maintenance. • Heavy duty totally enclosed fan cooled double insulated motor. • Electrically approved safe installation in the pool zone. • Built-in thermal overload protects the motor against damagefrom overheating. • Every unit is pressure and performance tested in factory ensuring quality and reliability. • Barrel Unions included for ease of installation and service (FCP). • High performance carbon ceramic mechanical seals for long life. • Stainless steel motor shaft resists corrosion. • Elevated pump mounting corrosion resistant base keeps moisture well away from the motor (FCP). • Larger strainer basket to protect the pump and reduce frequent cleaning.2 YEAR Bianco Pool Pump Warranty * Parts and labourElectrical Approval No: NSW 23665

BIA-CLP5001 0.7hp, 500W, 240V, Flows to 150l/m, heads to 10.0m Barcode: 9312198848366 BIA 163.00

BIA-FCP370S 0.5hp, 370W, 240V, Flows to 215l/m, heads to 12.5m Barcode: 9312198848373 BIA 308.00

BIA-FCP750S 1.0hp, 750W, 240V, Flows to 290l/m, heads to 15.1mBarcode: 9312198848397 BIA 350.00



SALT WATER CHLORINATORS• Smart micro-computer controlled system • Easy to use menu driven navigation system • Backlit Digital LCD display • Backlit intuitive navigation buttons • Precision adjustment of chlorine output to 1% • Dynamic tracking locks to chlorine output settings for precise chlorine production • Super Chlorinate Mode • Low and High Salt indicators • Audible Alert when remedial action is required • Automatic power reduction upon high salt condition • Pump Protection • Spa Mode • Battery backed clock • Self cleaning cell - standard on all models • Large cell surface area prolongs cell life • Exceptionally high quality cell anode material assures high efficiency12 MONTHS Warranty

BIA-SC20 20g/hr Chlorine Production BIA 1400.00

BIA-SC25A 25g/hr Chlorine Production BIA 1500.00

BIA-SC30 30g/hr Chlorine Production BIA 1630.00

SAND FILTERS• Improved water flow with the ultra pure filtration. • Corrosion and U.V. resistant polyester reinforced fibreglass winding design for exceptional strength which will not split. • Resistance against chemicals and corrosion with the ability to withstand high temperatures. • Barrel unions for ease of installation and serviceability. • Top mount heavy duty 7 position including winterize multi-port valve with large easy to operate handle and built in waste port for inspection of backwash water. • Standard stainless steel long life oil filled pressure gauge. • Simple backwashing requured periodically without need to hose down filter elements. • Suitable for use with Zeolite filter media. • Max.Water Temperature: 43oC• 10 YEAR WARRANTY ON TANKS• 2 YEAR WARRANTY ON COMPONENTS

BIA-T21 192l/m, 300kPa, 85kg sand. Barcode: 9312198849011 BIA 448.00





CARTRIDGE FILTERSHigh Performance cartridge filters are used to maintain a clean and safe swimming environment for your family in your pool or spa. Contaminants and debris are collected in the fine fibres of the cartridge element pleats. The cartridge element is easily removed from the filter tank for periodic cleaning, eliminating the need for backwashing of the filtration system.• Easy access to cartridge element via heavy duty lock ring. • Auto pressure relief preventing damage to pump and filter should filter become blocked. • Quick connect barrel unions for ease of plumbing. • Choice of two inlet ports enables inlet to be installed at either 90o or 180o to the outlet for installation versatility. • No backwashing of filter required. Stainless steel long life oil filled pressure gauge. • Compact, low profile UV resistant tank.2 YEAR Bianco Pumpz Warranty * Parts and labour

BIA-AF25 183l/m, 350kPa, suits 370W Pump. Barcode: 9312198849028 BIA 370.00

BIA-AF25CART Spare Cartridge BIA 107.00





CLOSE COUPLED STAINLESS STEEL MOTOR PUMP UNITSLight Weight, Noiseless and Reliable Operation, High Performance, water temperature to 80oC. Constructed from AISI 304 Stainless Steel Corrosion ResistantBLC = Stainless Steel Centrifugal Pump 70 = Rated Flow: 70l/min055 = Motor Power: 0.55kW S = 3 Phase

BIA-BLC70-055 0.55kW, 240V, flows to 120l/m, heads to 19m BIA 258.00







BIA-BLC70-75SK Pressure System Version with SK13B Controller BIA 486.00

BIA-BLC70-055C25 Flow Switch version for Booster Applications (See Note 1) BIA 948.00



Note 1 - Flow switch pumps require positive suction

HOT WATER CIRCULATORThe pump is characterised by: · Materials of construction suitable for potable water. · 3 speed operation for lower power consumption. · Flows to 65 litres/minute, heads to 6m · Quite operation (< 45 dB(A)Pump Performance: Max flows speeds 1,2,3: 20l/m, 42l/m, 65l/m Max heads speeds 1,2,3: 3m, 5m, 6mLiquid: Max. operating water temperature: 80oC, Temperature: Class 110Materials: Pump body: Bronze, DR, Back Plate and Rotor Can: Stainless Steel. Impeller:PPOInstallation: Maximum ambient temperature:40oC, Maximum operating pressure: 10 bar. Port Spacing:150mm, Pipe connections suction/discharge:1-1/4” BSP M. Optional Union Set:1-1/4” BSP F/3/4” BSP FElectrical data: Rated voltage:240V, Mains frequency: 50Hz Current Max: 0.4amps Capacitor: 3uF, Power consumption speeds 1,2,3 46W, 67W, 100W Motor duty: Continuous Motor type: Canned rotor. Motor protection:In-built thermal overload Ingress protection: IP 42 Insulation class: F. Power cable length: 1.2m. Net weight: 4.0kg12 Months Warranty

BIA-LRS32-6CU 3 Speed Bronze Circulators complete with Unions BIA 171.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





ACCESSORIESDAB-6BARPS Pressure Switch 6 BAR DBP 108.00

SK6

SK9A

SKIT6

SK12

DAB-12BARPS Pressure Switch 1.2 - 12 BAR DBP 111.00



BIA-SKIT6

Switch Kit complete with plug and play leads, pressure gauge, 1” non-return valve and nipple. Pressure switch has stainless steel back plate with union, and is adjustable between 1 and 6 bar. Factory setting is 1.4 – 2.8 bar, IP44 enclosure.

BIA 119.00

DAB-3WT Three Way Tee 1”x1”x1” Bronze DBP 21.00

DAB-5WT Five Way Tee 1/4”x1/4”x1”x1”x1” Bronze DBP 31.00

DAB-NRV25FM Check Valve 1” Bronze F/M DBP 25.00

DAB-NRV25MF Check Valve 1” Bronze M/F DBP 52.00

DAB-STR25M Screw In Strainer 1” Bronze DBP 13.00

BIA-SK6LOSS OF PRIME PRESSURE SWITCH. Pressure Switch Setting: 1 - 6 Bar, Factory Setting: 1.4 - 2.8 Bar, 240 V, 1ph,Connection: 6mm (1/4”) BSP, Indoor Use

BIA 12.00

BIA-SK9A

ADJUSTABLE PRESSURE SWITCH 6 BAR With stainless steel back plate. Pressure Switch Setting: 1 - 6 Bar, Factory Setting: 1.4 - 2.8 Bar 240 V, 1 ph, IP44, Connection: 6mm (1/4”) BSP

BIA 15.00

BIA-SK12(5M) 5 METRE FLOAT SWITCH WITH H05 NEOPRENE CABLE BIA 14.00

BIA-SK12(10M) 10 METRE FLOAT SWITCH WITH H05 NEOPRENE CABLE 240V, 1ph, 10 A max, “3 wire”, IP68, max 50oC. BIA 22.00

BIA-FSK1 10 METRE FLOAT SWITCH WITH H07 NEOPRENE CABLE240V, 1ph, 16 A max, “3 wire”, IP68, max 50oC. BIA 29.00

BIA-FSK1-20 20 METRE FLOAT SWITCH WITH H07 NEOPRENE CABLE240V, 1ph, 16 A max, “3 wire”, IP68, max 50oC. BIA 50.00

BIA-SK12CWB FLOAT SWITCH COUNTERWEIGHT 200g gland mounting BIA 3.00

RS3-BLADDERFLOATACElectronic Float Switch for 240V ACIncludes 10m lead and connector for RS3 surface mounted pumps

BIA 190.00

RS3E-BLADDERFLOATDC Electronic Float Switch low voltage for MKIIIE - Includes 10m lead and Scotchlok joiners to connect to MKIIIE BIA 180.00

BIA-PIGGYBACKFLOAT Piggyback Float Switch 16(8)A BIA 87.00

BIA-RS95 Pump Run Indicator Plug BIA 75.00

BIA-TSHKITA RAINWATER TANK SUCTION HOSE & FLOAT KIT BIA 63.00

BIA-SHKIT PRESSURE PUMP SUCTION HOSE KIT 0.7m BIA 43.00

BIA-DHKIT PRESSURE PUMP DISCHARGE HOSE KIT 1.4m BIA 32.00

STAINLESS STELL BRAIDED CONNECTION KITSFLE-700MFCKIT 1” F x 1” M x 700mm FLE 51.00

FLE-700MFECKIT 1” 90o F x 1” M x 700mm FLE 51.00





SOME DEALER SUPPLIED FITTINGS MAY BE REQUIRED FOR SOME PRESSURE SYSTEMS MAXIMUM WORKING PRESSURE 6 BAR for HIGHER PRESSURES RIGID PIPEWORK IS RECOMMENDED



ENGINE POWERED PUMPS

BIA-HP15A

5.5hp Fire PumpThe pump is a compact self-priming engine driven fire pump which is also ideal for high general duty applications. Supplied ready to operate complete with hose fittings and suction strainer. Heads to 55m, Flows to 330l/min, Suction to 7m, 1 x 1-1/2”, 2 x 1” BSP male discharge ports, 1 x 1-1/2” BSP male suction port. Low Oil Level Engine Protection, Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 703.00

BIA-2HP15A

6.5hp Twin Stage Fire PumpThe pump is a compact self-priming engine driven firepump supplied ready to operate complete with hosefittings and suction strainer. Heads to 75m, Flows to 200l/min, Suction to 7m, 1 x 1-1/2”, 2 x 1” BSP male discharge ports, 1 x 1-1/2” BSP male suction port, Low Oil Level Engine Protection, Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 749.00

BIA-WP20A

5.5hp Tanker PumpThe pump is a compact self-priming engine driven 2”Tanker Pump supplied ready to operate complete withhose fittings and suction strainer. Designed for tank filling,water carts and dust suppression.Heads to 30m, Flows to 450l/min, Suction to 7m, 1 x 2” BSP male discharge ports, 1 x 2” BSP male suction port, Low Oil Level Engine Protection, Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 571.00

BIA-WP30A

6.5hp GUSHER PumpThe pump is a compact self-priming engine driven 3”Gusher Pump supplied ready to operate complete withhose fittings and suction strainer. Designed for rapid dewatering tasks and tank filling applications.Heads to 30m, Flows to 1000l/min, Suction to 7m, 1 x 3” BSP male discharge ports, 1 x 3” BSP male suction port, Low Oil Level Engine Protection, Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 670.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION






BIA-FTB50

5.5hp Fire ‘Plastic’ PumpThe pump is a compact self-priming engine driven Plasticpump supplied ready to operate complete with hosefittings and suction strainer for pumping approved industrial and agricultural chemicals.Heads to 30m, Flows to 580l/min, Suction to 7m, 1 x 2” male discharge ports, 1 x 2” male suction port, Low Oil Level Engine Protection, Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 813.00

BIA-HP15AH

5.5hp Fire Pump With Honda EngineThe pump is a compact self-priming engine driven Firepump supplied ready to operate complete with hosefittings and suction strainer.Heads to 55m, Flows to 330l/min, Suction to 7m, 1 x 1-1/2”, 2 x 1” BSP male discharge ports, 1 x 1-1/2” BSP male suction port, Low Oil Level Engine Protection, Roll Frame, Rubber Mounting Feet

2 YEAR BIANCO PUMPZ WARRANTY

BIE 989.00

BIA-WP10AA

1.5hp Portable Engine PumpThe pump is a light weight self-priming general duty engine driven pump. Supplied ready to operate completewith hose fittings and suction strainer.Heads to 22m, Flows to 116l/min, Suction to 7m, 1” BSP female ports, Carry Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 319.00

BIA-FFHK

Fire Fighting Hose KitThe Fire Fighting Hose Kit comprises of: 1 x 5m x 38mmgrey PVC suction hose c/w strainer, nut and tails plus 2 x10m x 20mm black fire fighting delivery hose c/w nozzles,nuts and tails.12 MONTH WARRANTY

BIE 311.00




BIA-WB80

6.5hp Trash PumpThe pump is a compact self-priming engine driven trash pump with features that include easy maintenance wear plate, wear resistant silicon carbide mechanical seal, easy impeller removal, light weight aluminium pump housing.supplied ready to operate complete with suction strainer.Soft solids to 30mm, Heads to 25m, Flows to 750l/m, Suction to 7m, 1 x 3” BSP male discharge port, 1 x 3” BSP male suction port, Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 916.00

BIA-DHP15

6.5hp Diesel Powered Fire PumpThe pump is a compact self-priming engine driven fire pump which is also ideal for high general duty applications. Supplied ready to operate complete with suction strainer.Heads to 55m, Flows to 330l/min, Suction to 7m, 1 x 1-1/2”, 2 x 1” BSP male discharge ports, 1 x 1-1/2” BSP male suction port, Recoil start with decompression lever. Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 989.00

BIA-DHP20

6.5hp Diesel Powered High Pressure PumpThe pump is a compact self-priming engine driven high pressure pump which is also ideal for high general dutyapplications. Supplied ready to operate complete withsuction strainer.Heads to 65m, Flows to 500l/min, Suction to 7m, 1 x 2” BSP male discharge port, 1 x 2” BSP male suction port, Recoil start with decompression lever, Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 1010.00

BIA-2HP20A

6.5hp High Pressure PumpThe pump is a compact self-priming engine driven high pressure pump which is also ideal for high general dutyapplications. Supplied ready to operate complete withsuction strainer.Heads to 80m, Flows to 33 0l/min, Suction to 7m, 1 x 2” BSP male discharge port, 1 x 2” BSP male suction port, Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 1016.00

BIA-SHP50

13hp Cast Iron High pressure PumpThe pump is a compact self-priming engine driven high pressure pump which is also ideal for high general dutyapplications. Supplied ready to operate complete withsuction strainer.Heads to 100m, Flows to 500l/min, Suction to 7m, 1 x 2” BSP male discharge port, 1 x 2” BSP male suction port, Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 1321.00

BIA-TF2500

2.0 kW GeneratorThe generator is a compact AC and DC power source with circuit breaker protection. 5.5 hp engine with low oil shutdown. 2.2 kW, 240V output, 8.0A 12V output. Roll Frame, Rubber Mounting Feet12 MONTH BIANCO PUMPZ WARRANTY

BIE 615.00




AUTO REELS

BIA-ZA01-20B

20m AIR REEL 180° Swivel Rotation, Includes 20m Hose & Fittings, Convenient Carry Handle, Automatic Rewind, The Retractable Auto Hose Reel provides secure storage of your hose and allows you to extend and retract your hose without kinks and knots.180° rotation extends your reachand allows you to reach all desired points within the hose length. The convenient carry handle enable you to move the hose reel between selected mounting points.Barcode: 931219884019312 Months Warranty

BHR 149.00

BIA-ZW03-20B

20m WATER REEL180° Swivel Rotation, Includes 20m Hose & Fittings, Convenient Carry Handle, Automatic Rewind. The Retractable Auto Hose Reel provides secure storage of your hose and allows you to extend and retract your hose without kinks and knots. 180° rotation extends your reachand allows you to reach all desired points within the hose length. The convenient carry handle enable you to move the hose reel between selected mounting points.HOSE – 20 metre; Internal Diameter – 12mm (1/2”); Max.Pressure-1.000kPa(150PSI); Temp Range -5°C/45°C; Fittings: ¾” NPT; Barcode: 931219884018612 Months Warranty

BHR 151.00

BIA-ZW08-30B

30m WATER REELThe new BIA-ZW08-30B is a Retractable Auto Hose reel which provides secure storage of the 30 metres of hose supplied and allows the user to extend and retract the hose without kinks and knots. The hose is simply unwound to any desired length. The BIA-ZW08-30B features a special slow and steady automatic rewind mechanism with locking stop. The hose reel is characterised by: ·Hose unwinding to any desired length.·Slow and steady automatic rewinding with stop. ·30 metre (100’) hose length. ·1.7 metre supply hose with quick release coupling and ¾” tap connector. ·Spray nozzle with jet adjustment. ·Easy disassembly and transport for winter storage. ·1800 lateral pivoting.Liquid: Clean water temperature range: 0°– 45°C; Hose: Length: 30m (100’); Internal diameter: 12mm (1/2”); Maximum pressure: 1000 kPa (150psi); Barcode: 931219885560912 Months Warranty

BHR 204.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




WATER FEATURE PUMPS• Flow rates are to be used as a guide only• Feature / Pond hose size and flow adjuster will effect flow rates• DO NOT operate without water

BIAWFP200

Bianco Water Feature Pump 200LPH 240V, 2.5W, Head to 0.5M max., 12mm Outlet, 3M cable length, Indoor, outdoor subject to proper installation, Small feature size. 24 Pack.

AQU 17.00

BIAWFP350

Bianco Water Feature Pump 350LPH240V, 6W,Head to 0.5M max., 12mm Outlet, 3M cable length,Indoor, outdoor subject to proper installation, Small feature size. 24 Pack.

AQU 19.00

BIAWFP350LV

Bianco Water Feature Pump 350LPH Low Voltage12V AC, 6W, Head to 0.5M max., 12mm Outlet, 3Mcable length, Indoor, outdoor subject to proper installation, Small feature size. 16 Pack.

AQU 34.00

BIAWFP500

Bianco Water Feature Pump 500LPH240V, 8W,Head to 1.1M max., 12mm Outlet, 3M cable length,Indoor, outdoor subject to proper installation, Small feature size. 16 Pack.

AQU 23.00

BIAWFP1000

Bianco Water Feature Pump 1000 LPH240V, 16W,Head to 1.7M max., 3M cable length, 13/16/19mm Outlet.2 Year Guarantee (*Excludes moving parts - impeller)

AQU 50.00

BIAWFP1500

Bianco Water Feature Pump 1500 LPH240V, 25W,Head to 2.5M max., 3M cable length, 13/16/19mm Outlet.2 Year Guarantee (Excludes moving parts - impeller)

AQU 78.00

BIAWFP5000

Bianco Water Feature Pump 50006000LPH, 240V, 190W,Head to 5.5M max., 10M cable length, 13/19/25mm Outlet.2 Year Guarantee (Excludes moving parts - impeller)

AQU 182.00




POND PUMPS• Flow rates are to be used as a guide only• Pond hose size and flow adjuster will effect flow rates• DO NOT operate without water, always ensure that water levels are maintained

BIAPP750

Bianco Pond Pump 750LPHSubmersible pump, 750LPH Flow Rate, 240V, 12W, 1.5M Head max, FT03 Fountain type, 12mm Outlet, 10M Cable Length, Indoor/Outdoor, Small Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 8 Pack.

AQU 53.20

BIAPP750LV

Bianco Pond Pump 750LPH Low VoltageSubmersible pump, 750LPH Flow Rate, 12V AC, 12W, 1.5M Head max., FT03 Fountain type, 1800mA Transformer rating, 12mm Outlet, 10M Cable Length, Indoor/Outdoor, Small Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 8 Pack.

AQU 67.20

BIAPP1000

Bianco Pond Pump 1000LPHSubmersible pump, 1000LPH Flow Rate, 240V, 16W, 1.7M Head max., FT03 Fountain type, 19mm Outlet, 10M Cable Length, Indoor/Outdoor, Medium Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 8 Pack.

AQU 59.00

BIAPP1000LV

Bianco Pond Pump 1000LPH Low VoltageSubmersible pump, 1000LPH Flow Rate, 12V AC, 16W, 1.7M Head max., FT03 Fountain type, 1800mA Transformer rating, 19mm Outlet, 10M Cable Length, Indoor/Outdoor, Medium Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 8 Pack.

AQU 73.60

BIAPP1500

Bianco Pond Pump 1300LPHSubmersible pump, 1300LPH Flow Rate, 240V, 25W, 2.5M Head max., FT03 Fountain type, 19mm Outlet, 10M Cable Length, Indoor/Outdoor, Medium Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 8 Pack.

AQU 73.60

BIAPP1500LV

Bianco Pond Pump 1300LPH Low VoltageSubmersible pump, 1300LPH Flow Rate, 12V AC, 25W, 2.5M Head max., FT03 Fountain type, 3300mA Transformer rating, 19mm Outlet, 10M Cable Length, Indoor/Outdoor, Medium Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 8 Pack.

AQU 98.40

BIAPP2000

Bianco Pond Pump 2000LPH240V, 45W, 3M Head max., FT04 Fountain type, 25mm Outlet, 10M Cable Length, Indoor/Outdoor, Medium Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 4 Pack.

AQU 96.00

BIAPP2000LV

Bianco Pond Pump 2000LPH Low Voltage240V, 39W, 3M Head max., FT04 Fountain type, 2500mA Transformer Rating, 25mm Outlet, 10M Cable Length, Indoor/Outdoor, Medium Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 4 Pack.

AQU 134.40

BIAPP3500

Bianco Pond Pump 3500LPH240V, 60W, 3.5M Head max., FT04 Fountain type, 25mm Outlet, 10M Cable Length, Indoor/Outdoor, Medium Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 4 Pack.

AQU 157.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION




BIAPP5000

Bianco Pond Pump 5000LPH240V, 99W, 4M Head max., FT05 Fountain type, 25mm Outlet, 10M Cable Length, Indoor/Outdoor, Large Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 2 Pack.

AQU 185.60

BIAPP6000

Bianco Pond Pump 6000LPH240V, 190W, 4.8M Head max., FT04 Fountain type, 25mm Outlet, 10M Cable Length, Indoor/Outdoor, Large Feature Size. Attachments - Jet Spray, Bell Spray, Telescopic, Fountain Stem, Dual Flow Adjustor, Connector & T Piece. 2 Pack.

AQU 196.00

BIA-JFP8000

Bianco 8000 LPH240V, 125W,Head to 4.0M max., 10M cable length, 25mm Outlet, 3 Fountain Heads (Spray, Bell & Foam Jet)2 Year Guarantee (Excludes moving parts - impeller)

AQU 251.00

BIA-JFP10000


AQU 283.00

BIA-JGP15000


AQU 367.00

BIA-JGP20000


AQU 409.00

BIA-JGP25000

Bianco 25000 LPH 240V, 520W,Head to 8.0M max., 10M cable length, 38mm Outlet, 3 Fountain Heads (Spray, Bell & Foam Jet)2 Year Guarantee (Excludes moving parts - impeller)

AQU 461.00

POND PUMPS• High performance motor with innovative electronics, using up to 50% less energy• Handles dirt particles up to 6mm• Ceramic shaft for longer life• Suitable for pond or waterfall• Low profile and shaped for stable fit on bottom of pond

AAQ-EFP-4000Pond Pump 4000LPH240V, 50W, 3.2M Max. Head, 2” Outlet, 1.5” Intake, 10M Cable Length. Dimensions 380 x 318.5 x 162.5 mm

AQU 255.00


AQU 365.00


AQU 420.00


AQU 465.00

ENGINEDRIVEN



POOL & FILTRATION

RAIN HARVESTING

FARM & IRRIGATION





UVC BOX FILTER• Low pressure filters• Low voltage• Incorporates UV lamp as water enters system• Foam filter sheets trap particles• Biological filtration system at bottom of the filter provide habitat for beneficial bacteria to grow. These bacteria naturally convert harmful ammonia and other wastes into healthy nitrates

AAQ-UBF-6000LV

Box Filter UVC for 6000L Pond12V AC, UV 9W, Suitable for ponds up to 6000L, Outlet 50mm, Intake 20/25/32/40.Dimensions 380 x 280 x 383 mm.

AQU 275.00

AAQ-UBF-12000LV

Box Filter UVC for 12000L Pond12V AC, UV 11W, Suitable for ponds up to 6000L, Outlet 70mm, Intake 20/25/32/40.Dimensions 560 x 380 x 437 mm.

AQU 400.00

UVC PRESSURE FILTER• Pressurised filter system• Low voltage• Three phase mechanical filtration – coarse, medium and fine foam filters• Biological filtration - bio-balls at bottom of the filter provide habitat for beneficial bacteria to grow. These bacteria naturally convert harmful ammonia and other wastes into healthy nitrates• UV filtration – final stage uses a low voltage UVC in the middle of the filter. Exposure to the UV light kills algae as the water passes upwards through the filter on the way back to the pond• External pressure indicator lets you know when filter needs cleaning• Can be partially buried• Simple clip design for easy maintenance

AAQ-CF-10LVUVC Pressure Filter for 4000L Pond12V AC, UV 7W, Suitable for ponds up to 4000L, 15/20/25 Outlet, 15/20/25 Intake. Dimensions 335x289x404 mm.

AQU 255.00

AAQ-CF-20LV

UVC Pressure Filter for 8000L Pond12V AC, UV 9W, Suitable for ponds up to 8000L, 20/25/32/40 Outlet, 20/25/32/40 Intake. Dimensions 416 x 342 x 519 mm.

AQU 355.00

AAQ-CF-30LV

UVC Pressure Filter for 12000L Pond12V AC, UV 11W, Suitable for ponds up to 12000L, 20/25/32/40 Outlet, 20/25/32/40 Intake. Dimensions 416 x 342 x 599 mm.

AQU 445.00

EASY CLEAN UVC PRESSURE FILTER• Pressurised filter system• Three phase mechanical filtration – coarse, medium and fine foam filters• Biological filtration - bio-balls at bottom of the filter provide habitat for bene ficial bacteria to grow. These bacteria naturally convert harmful ammonia and other wastes into healthy nitrates• UV filtration – final stage uses a low voltage UVC in the middle of the filter. Exposure to the UV light kills algae as the water passes upwards through the filter on the way back to the pond• Simple and convenient cleaning of the filter by rotating the cleaning handle• High power UVC and large capacity system for larger ponds• External pressure indicator lets you know when filter needs cleaning• Can be partially buried• Simple clip design for easy maintenance

AAQ-ECF-15000

Easy Clean UVC Filter for 15000L Pond240V, UV 18W, Suitable for ponds up to 15000L. Outlet 20/25/32/40, Intake 20/25/32/40. Dimensions 640 x 413 x 694 mm.

AQU 710.00



D.C. PUMPS FOR DIESEL

PIU-000342 BYPASS 3000 12V, 50 l/m, 3/4" ports, 1.5 bar maximum pressure PDP 245.00

BYPASS

CARRY

BATTERY KIT

BI-PUMP

PIU-000347 BYPASS 3000 24V, 50 l/m, 3/4" ports, 1.5 bar maximum pressure PDP 245.00

PIU-000223C CARRY 3000 12V, 50 l/m, 3/4" ports, 1.5 bar maximum pressure, includes carry handle and 2m cable kit with fuse. PDP 308.00

PIU-000224C CARRY 3000 24V, 50 l/m, 3/4" ports, 1.5 bar maximum pressure, includes carry handle and 2m cable kit with fuse. PDP 308.00

PIU-000225C

BATTERY KIT 3000 12V, 50 l/m, 3/4" ports, 1.5 bar maximum pressure, includes carry handle and 2m cable kit with fuse, 4m of 3/4" hose, suction strainer and manual nozzle.

PDP 393.00

PIU-000225C-A60

BATTERY KIT 2000 12V, 50 l/m, 3/4" ports, 1.5 bar maximum pressure, includes carry handle and 2m cable kit with fuse, 4m of 3/4" hose, suction strainer and AUTO nozzle.

PDP 470.00

PIU-000226C

BATTERY KIT 3000 24V, 50 l/m, 3/4" ports, 1.5 bar maximum pressure, includes carry handle and 2m cable kit with fuse, 4m of 3/4" hose, suction strainer and manual nozzle.

PDP 393.00

PIU-F16586000 DRUM KIT BASE SUIT BATTERY KIT PDP 101.00

PIU-000363-12V BI-PUMP 12V, 85 l/m, 1" ports, 1.25 maximum pressure, includes on/off switch PDP 577.00

PIU-000363-24V BI-PUMP 24V, 85 l/m, 1" ports, 1.25 maximum pressure, includes on/off switch PDP 577.00

FLOW METERS

PIU-000550 K33 - Volumetric meter for diesel fuel, 3 digits resettable 6 digits totaliser. PDP 274.00

PIU-000560 K44 - Volumetric meter for diesel fuel, 4 digits resettable 8 digits totaliser. PDP 373.00




A.C. PUMPS FOR DIESEL

PIU-000730 PANTHER 56 240V; 56l/m, 370W, 2900rpm, 1” ports with filter PDP 308.00

PANTHER

E80

CUBE 56

PIU-000732 PANTHER 72 240V, 72l/m, 500W, 2900rpm, 1” G Flangedwith filter PDP 378.00

PIU-000305 E 80 240V, 75l/m, 500W, 1450rpm, 1” ports PDP 552.00

PIU-000326 E 120 240V, 100l/m, 780W, 1450rpm, 1” ports PDP 739.00

PIU-000575

CUBE 56 240V, 56l/m, 370W, 2900rpm, 1” ports with filter, cables and switch, 4m rubber hose and automatic nozzle hanger. Cube 56 is also applied with volumetric metre, 3 digits resettable and 6 digits totaliser, anti-corrosive treated steel painted cabinet.

PDP 1077.00

NOZZLES

PIU-000641 SELF 2000 MANUAL NOZZLE 1” BSP PDP 40.00

PIU-A60 AUTOMATIC NOZZLE A60 1” BSP PDP 77.00

A.C. PUMPS FOR OILELECTRIC PUMPS

PIU-000304300

PIU-000334

PIU-000304300 VISCOMAT 230/3M 14l/min 16 bar 240V PDP 718.00

PIU-000334 VISCOMAT 70M 25l/min 6 bar 240V PDP 592.00

PIU-000331900 VISCOMAT 70T 25l/min6 bar 415V PDP 592.00

PIU-000303 VISCOMAT 90T 50l/min 5 bar 415V PDP 644.00


1. QUOTATION AND FORWARD ORDERS1.1.1 No quotation given by the Company shall constitute or be deemed to

constitute a binding offer and a valid contract shall only exist after the Company’s written acceptance of an order (whether by issue of the Company’s standard invoice/statement or otherwise). Such contract shall be subject to the conditions set out below.

1.2 Where goods have to be ordered from overseas the Company shall not be liable to the Purchaser for such an order unless and until the Manufacturer communicates its acceptance of such an order to the Company.

1.3 A quotation is valid for thirty (30) days only and the Company reserves the right to amend it if an error or omission has occurred.

2. DESCRIPTION OF GOODS2.1 Weights and/or dimensions included in any catalogues,

advertisements, illustrated matter and price lists are approximates only and details thereof shall not be binding unless and to the extent only that such details are specified in the contract.

2.2 Technical documents or drawings submitted to the Purchaser prior to a contract being entered into remain the property of the Company and shall not be copied reproduced or used by manufacturers or transmitted to a third party unless the prior written permission of the Company is obtained.

2.3 One copy of the technical data operator’s handbook and spare parts list where applicable and subject to availability will be supplied by the Company to the Purchaser without charge at the time of delivery (or if unavailable, when available). Further copies shall be at the cost of the Purchaser.

3. WARRANTIES3.1 Subject to the provisions of the contract all and any terms conditions

and warranties or representations expressed or implied whether statutory or otherwise collateral or antecedent hereto or otherwise with respect to the merchantability quality condition fitness durability suitability of the goods ordered in any respect (except those expressly contained herein or incorporated herein by reference or otherwise expressly agreed to in writing by the Company) are to the extent that the same may be excluded, hereby expressly negatived and excluded.

3.2 The Purchaser shall satisfy itself as to the condition quality and suitability of the goods and the fitness of the goods for the purpose(s) for which the goods are being purchased and as to its compliance with the description (if any) of such goods. Any description shall be by way of identification only and the use of such description shall not constitute this contract sale by description.

3.3 The Company shall not, after delivery of the goods to the Purchaser, be responsible or liable (in the absence of any wilful or negligent act or omission on the part of the Company) for any liability claim loss damage or expense of any kind or nature (including but not limited to loss of profits earnings or income direct indirect consequential contingent or resulting liability loss or damage whether to persons property or otherwise) or death or injury caused by or arising out of or relating in any manner or incidental to the goods or the possession or use thereof by the Purchaser or any third party or in relation to the condition storage supply non supply performance or non-performance inadequacy in or any defect or breakdown of any accident to the goods or any item therein or any thing or service provided for or contemplated by or incidental to or arising out of the distribution sale promotion display or advertisement of the goods hereunder. The Purchaser shall and does hereby release and discharge the Company from any liability in respect of any action proceeding demand claim loss damage expense death injury aforesaid.

3.4 These conditions of sale shall not be read or applied so as to purport to exclude restrict or modify or have the effect of excluding restricting modifying the application in relation to this contract of all or any of the provisions of Division 2 of Part V of the Trade Practises Act 1974 or the exercise of right conferred by such a provision or any liability of the Company for breach of a condition or warranty implied by such a provision but all other conditions or warranties which would or might otherwise be implied and are hereby expressly excluded and negatived.

3.5 To the extent that the Trade Practises Act 1974 permits the Company to limit its liability for a breach of the condition or warranty implied pursuant to Part V of the Act, than the Company’s liability for such

breach including any consequential loss which the Purchaser or any third party may sustain or incur shall be limited, at the option of the Company, to:

(i) the replacement or repair of the goods concerned or the supply of equivalent goods; or

(ii) the payment of the cost or replacing or repairing the goods or of acquiring equivalent goods.

Whichever, may be determined in the absolute discretion of the Company to be appropriate in the circumstances. The Purchaser shall within thirty (30) days of the Purchaser first becoming aware of the facts giving rise to a claim under this provision make written claim to the Company setting out the full particulars of such claim and deliver freight prepaid to the Company the subject good(s) so as to enable the Company to examine the same and satisfy itself as to the subject claim.

3.6 The Company warrants that in the event of any defect being discovered within any warranty period granted by the Manufacturer of the subject goods or any component part or parts thereof the Company will, provided that it is satisfied that the defect is due to an inherent defect of faulty material or bad workmanship, repair or replace the defective part or the goods (as the Company shall in its absolute discretion determine) without charge upon the defective goods being returned freight prepaid to the Company. Any claim under this warranty must be made to the Company in writing within thirty (30) days of the defect being discovered.

3.7 The benefits of any warranty herein contained shall not apply in the case of:

(i) defect(s) due to misuse or neglect.(ii) goods, which have been altered or added to or otherwise modified

without the prior written consent of the Company.(iii) goods repaired or serviced by any person other than the Company or

its duly authorised representative.(iv) goods used for purposes other than those for which they were

designed as defined and/or specified in the Manufacturer’s and /or the Company’s catalogues, advertisements, operator’s handbooks, and technical data.

4 SELLING PRICE4.1 The selling price dated on the Company’s invoice to the Purchaser

is based upon the Manufacturer’s then current selling price to the Company, the then current freight rates, customs duty, landing clearing and storage charges, insurance and foreign exchange rates. Should there be any variation in any of these rates or charges or if there is any variation as a result of, or changes in, the laws or regulations for the time being in force (whether State or Commonwealth) at or before the goods are delivered to or collected by the Purchaser (as the case maybe) then, in such event, the Company reserves the right to vary the selling price, including the profit margin of the Company as shall be appropriate in the circumstances and the Purchaser agrees to pay any such varied selling price in lieu of the original selling price.

5 DELIVERY5.1 Unless otherwise agreed the delivery period shall run from the latest of

the following dates.(a) Acceptance of the order by the Company.(b) The date upon which the Manufacturer receives notice of a Valid

Import Licence.(c) The date of receipt by the Company of any advance payment or Letters

of Credit as may be stipulated in the contract.(d) The date of receipt by the Manufacturer of a final order from the

Company for the Manufacturer to commence manufacture of the subject goods.

(e) A minimum order handling fee of $15 will apply to all deliveries where the invoice value is less than $150. This fee will not apply to back orders if the original order value exceeds this limit.

(f ) Standard pack quantities may apply.(g) All deliveries must be signed for upon receipt(h) All damaged goods must be identified upon receipt of delivery.

6. DELAY IN DELIVERY6.1 No liability shall be attached to the Company for deliveries delayed,

suspended, cancelled, part or short delivered due to an Act of God, war, riot, fire explosion, accident, flood, shortage, inability to obtain fuel, power, raw materials, labour, containers, or transportation

GENERAL TERMS AND CONDITIONS OF SALE


facilities, government law, regulations, orders or action, breakage or failure of machinery or apparatus, national defence requirements or any other event beyond the reasonable control of the Company or in the event of labour trouble, strike, lockout or injunction (whether or not such labour event prevents the manufacture, shipment acceptance of a shipment of the goods or of material upon which the manufacturer of the goods is dependent. Deliveries suspended under this Clause may at the option of the Company be cancelled without any liability attaching to the Company or completed within an extended period and in either case, the Company shall notify the Purchaser in writing accordingly.

7 TRANSPORT7.1 All deliveries into Capital Cities and the following regional centres

(Newcastle, Wollongong, Gold Coast, Hobart, Launceston, Devonport and Geelong) will be Free into Store. Backorders emanating from a multi line order will be delivered Free into Store. Deliveries to third parties or freight forwarders will be subject to our standard delivery rates.

7.2 All deliveries to other destinations will be charged to the Purchaser(i) the Purchaser may nominate its own freight provider (subject to clause

7.3)(ii) the Purchaser may nominate White International to deliver the goods

at a cost, which is in accordance with a schedule of rates provided.7.3 Priority delivery service is available. All costs will be charged to the

Purchaser.7.4 Cost associated with offloading, unpacking, positioning, and

erections are not included in the Company’s selling price and are the responsibility of the Purchaser who shall provide competent labour to effect these arrangements at their own expense. Delivery of goods in all other cases shall be at the cost of the Purchaser.

8 RISK AND TITLE8.1 No general property or equitable interest in goods supplied by the

Company to the Purchaser shall pass to the Purchaser until such time (hereinafter called “the specified time”) as the price of the goods and all other moneys (if any) due from the Purchaser to the Company in respect of the goods or under any contract between the Company and the Purchaser shall have been paid to the Company in full.

8.2 Until the specified time the Purchaser shall be only a bailee of the goods for the Company and the Purchaser shall;

(a) so hold the goods until the specified time as to enable them always readily to be identified as the property of the Company

(b) upon written demand re-deliver the goods to the Company or allow the Company by its servants or agents to enter upon any premises where the goods are stored to recover the same.

8.3 The Purchaser is authorised before the specified time as agent for the Company to sell the goods for the account of the Company.

8.4 The goods shall be at the Purchaser’s risk from the time of despatch from the Company’s premises.

9 PAYMENT9.1 For machines ex Australian stock – payment 14 days from date of

despatch ex company warehouse. For pumps and goods excluding machines ex Australian stock – payment on or before the 30th day of the month following the month in which the goods are despatched by the Company to the Purchaser (unless otherwise specified in the Company’s statement/invoice).

9.2 For goods to be imported against order – 50% deposit with order, balance by irrevocable letter of credit to be established at the time of order through our nominated bank account payable on demand against presentation of documents unless otherwise arranged.

9.3 There shall be no delay of payment after delivery of the goods ordered except in accordance with the quoted terms.

10 CANCELLATION Request for cancellation of an order must be in writing. Any such

cancellation shall be of no force or effect and shall not be binding on the Company unless and until such cancellation is accepted by the Company in writing. Cancellation of any order shall be at the sole and absolute discretion of the Company. No request for cancellation by the Purchaser will be accepted by the Company where goods have been

ordered from the Manufacturer by the Company against a firm order from the Purchaser.

11. SERVICE UNDER WARRANTY11.1 The performance figures quoted by the Manufacturer and/or the

Company do not and shall not be deemed to constitute a warranty by the Company and it is not warranted that such exact performance figures will be achieved.

11.2 Inspection of a machine and its performance may be carried out by arrangement, at the Purchaser’s expense.

11.3 The Manufacturer’s normal working tolerances shall be considered correct for the machines unless otherwise specifically agreed between the Purchaser and the Company, in writing.

11.4 The Company shall by mutual arrangements with the Purchaser provide technical data assistance during run-off or commissioning of the machines or pumps but this does not include routine loading during extended test periods. Any commissioning period, if applicable, shall be for the duration of one (1) working day unless otherwise agreed to in writing.

11.5 Service given free of charge during the Manufacturer’s warranty period does not include work properly described as maintenance and repair preventative maintenance must be provided by the Purchaser as recommended by the Manufacturer in order to preserve and fulfil the terms of warranty.

11.6 Extended commissioning shall be subject to the Company’s then current rate of charges.

11.7 Where new components are purchased locally or supplied by the Company in order to expedite warranty service the faulty components must be retained by or returned to the Company freight prepaid to enable the Company to support its claim on the Manufacturer.

12. RETURN OF GOODS Save as herein provided, goods purchased from the Company shall in

no case be returned to the Company unless;(i) the Purchaser first notifies the Company within 3 days of the receipt of

goods, of its desire to return goods to the Company, stating the reasons therefor, and

(ii) the Company agrees to accept the return of the goods, subject always to such terms and conditions (if any) as the Company shall in its absolute discretion stipulate, and

(iii) the goods are returned freight prepaid to the Company at its head office warehouse.

(iv) All goods returned will be subject to a handling charge of the greater of $30 or 10% of the sale price of the goods. Any goods which are classified as being made to order or not listed on the Seller’s current standard price list are not able to be returned.

Goods returned to the Company shall at all relevant times be at the sole risk of the Purchaser. It shall be the Purchaser’s obligation and responsibility to obtain a written acknowledgment from the Company as to its receipt of goods returned by the Purchaser to the Company pursuant to and in accordance with the terms of this clause.

13. DEFINITIONS In this agreement unless the context requires otherwise the following

expressions shall have the following meanings respectively;(i) “Distributor” means the authorised distributor of the Company(ii) “Purchaser” means and includes the Distributor (where the context so

admits) and the original retail purchaser of the goods (and whether purchased from the Distributor or from the Company direct).

(iii) “Goods” means any goods purchased from the Company.(iv) “Contract” means all those documents comprising the agreed terms

of sale of goods by the Company to the Purchaser including but not limited to purchase order, invoices, the Company’s General Terms and Conditions of Sale and such other written material of the Manufacturer and/or the Company relating to the goods and which is issued to or brought to the notice of the Purchaser and any writing of the Purchaser issued to the Company or its Distributor and accepted by the Company as constituting a term or condition of the contract.

(v) “Manufacturer” means the manufacturer of goods sold by the Company.

(vi) “The Company” shall mean and include White International Pty Limited and any other related or associated companies.

GENERAL TERMS AND CONDITIONS OF SALE continued

White International Pty Ltd52-60 Ashford Avenue

Milperra NSW 2214 Australia

PO Box 304Milperra LPO NSW 2214 Australia

Phone: 02 9783 6000Fax: 02 9783 6001

www.whiteint.com.au

Sales Hotline: 1300 783 601Sales Faxline:

02 9783 6003

[email protected]

White International Price list

Documents

Transcript of White International Price list