What to look for How to ensure it Is it done?LIGHTING LIGHTING LIGHTINGIs the light connected appropriately and safely to the rig?

The G clamp is connected on top of the light.The safety chain is connected to the light and to the rig.Ensure the light is the right way round. (with the knob at the bottom)Is the plug pushed in properlyAre all wires tidy and un-messy

Yes/ No

Is the light put together properly? Make sure the following are present and connected properly; Lense, Lamp tray, gel frame, barn doors

Yes/ No

Are all lights and equipment present to the specification given?

Count all lights and make sure they’re the right ones.Make sure right sound desk and dimmer pack is there

Yes/ No

Is the Lighting desk connected properly? Check connections from light plugs to the sound deskMake sure desk is turned on (switch can be found at back of the deskMake sure desk is connected properly to the 32 amp socket on the wall (See Key)Check if any dimmers have tripped(If they have tripped turn them back on)

Yes/ No

SOUND SOUND SOUNDEnsure all sound equipment is present to specification?

Ensure all required leads are presentMake sure sound desk is present.

Yes/ No

Is the sound desk connected up properly? Is the right leads (mini Jack) connected from the sound desk to the laptop in the right ports (see Key)Is the sound desk turned on

Yes/ No

Equipment Overview: Toshiba laptop, Projector, Powered Speakers, CD Player, IPod Lead (mini Jack), Zero 88 Dimmer Pack, Strand Lighting Desk, 10x CCT Minuette Fresnel’s w/gel Frames

Is it connected up to the mains plug socket

PROJECTOR PROJECTOR PROJECTOREnsure all projector equipment is present to specification?

Is a power lead presentIs the VGA cable present (if not go to technicians office and look for the leads hanging on the wall and pick required one)

Yes/ No

Is the projector connected up properly? Ensure power lead is connected properlyEnsure VGA cable is connected properly

Yes/ No

KEY KEY KEY32 AMP Socket

Mini Jack and Port