Well Profiles and Terminology
1
Well Profiles and Terminology A simple build/hold/drop well profile, known as an "S" well, is shown in Figure 2-1. The kickoff point (KOP) is the beginning of the build section. A build section is frequently designed at a constant buildup rate (BUR) until the desired hole angle or end- of-build (EOB) target location is achieved. BUR is normally expressed in terms of degrees per hundred feet (°/100 ft), which is simply the measured change in angle divided by the measured depth (MD) drilled.
-
Upload
brunozalazar -
Category
Documents
-
view
214 -
download
1
description
dr
Transcript of Well Profiles and Terminology
Well Profiles and Terminology
A simple build/hold/drop well profile, known as an "S" well, is shown inFigure 2-1. The kickoff point (KOP) is the beginning of the build section. Abuild section is frequently designed at a constant buildup rate (BUR) untilthe desired hole angle or end-of-build (EOB) target location is achieved. BURis normally expressed in terms of degrees per hundred feet (/100 ft), whichis simply the measured change in angle divided by the measured depth (MD)drilled.
![Are glucose profiles well-controlled within the …...The study objectives stated were to evaluate glucose profiles [4–10,13,15,16] and associations of HbA1c with glucose profiles](https://static.fdocuments.in/doc/165x107/5f0d2b887e708231d4390452/are-glucose-profiles-well-controlled-within-the-the-study-objectives-stated.jpg)
