Welding Machine & Rectifier - - Cookson · PDF fileWelding Machine & Rectifier ... TIG Series...
Transcript of Welding Machine & Rectifier - - Cookson · PDF fileWelding Machine & Rectifier ... TIG Series...
Welding Machine & Rectifier
ARC Series Inversion DC Arc Welder(Field Stop IGBT)...............................
ARC Series Inversion DC Arc Welder(IGBT).................................................
ARC Series Inversion DC Arc Welder(MOSFET)..........................................
ARC-T Series Multi-Station DC Inverter Welder(IGBT).................................
MZ Series DC Inverter Automatic Submerged Arc Welder............................
CUT Series Inversion Air Plasma Cutter.........................................................
CT Series DC Inverter Multifunction Welder..................................................
TIG Series Manual Arc / Argon Arc Welder(IGBT)........................................
TIG Series Dual Hand/Argon Arc Welder(MOSFET).....................................
TIG-S Series Inversion DC Argon Arc Welder(MOSFET).............................
TIG-P Series DC Inverter Pulse Welder(IGBT).............................................
TIG-AC/DC Series Inversion
AC-DC Square Wave Argon Arc Welder(MOSEFT)......................................
NB Series Inversion MIG/MAG CO2 Gas Shielded Welder
(IGBT) & NB-S Series Inversion CO2 Gas Shielded And Stick(MMA)
Dual Functions Welder(IGBT).......................................................................
MIG-Y/F Series Inversion CO2 Gas Protection Welder....................................
Standard Recovery Diodes...........................................................................
Phase Control Thyristors...............................................................................
Inverter Grade Thyristors..............................................................................
BI-directional triode thyristor(triacs)...............................................................
Bridge Rectifier...............................................................................................
Standard Recovery Power Modules..............................................................
G01
G02
G03
G04
G05
G06
G07
G08
G09
G10
G11
G12
G13
G14
G15
G16
G17
G17-18
G19
G20-22
�Advanced full-bridge field stop IGBT inverter technology, frequency 20KHZ,significantly
reduced the size and weight of the welder.
�Advanced auxiliary power supply design, leading to a wider range of welding power source.
�Advanced control options, significantly improved the performance of welding, perfect sat-
isfying the demand of welding technology.
�Widely used in various acid, alkaline electrode welding.
�Easy with the arc, little spatter, current stability, and good forming characteristice, ect.
�Adjustable arc-start feature, significantly improved arc welding performance.
�Automatic force current increasing, significantly improver welding performance in welding
with long wire cable, remote welding can be realized addition option on wireless remote
control, making easier remote welding.
�Available on two features-steep drop & ramp down, meet different customer needs.
�Normal Accessories:
Earth clamp 1pcs, fast joint 2pcs, allen-key 1pcs
1. Application
ARC SeriesInversion DC Arc Welder(Field Stop IGBT)
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
1.5-5.0
1.5-10.0
1.5-15.0
2-20
Dia.Welding rod/
carbon rod
2.5/3.2
3.2/4.0
3.2/4.0/5.0
3.2/4.0/5.0
Adjustment
current(A)
20-200
20-250
20-315
20-400
Suitable model
ARC-200
ARC-250
ARC-315
ARC-400
Carbon steel, Stainless
Steel, Alloy Steel
2. Specification
Parameter
Rated input voltage(V)
Rated input current(A)
Rated input capacity(KVA)
No-load voltage(V)
Output current(A)
Rated working voltage(V)
Drive adjustment(A)
Duty cycle(%)
Efficiency(%)
Power factor
Weight(kg)
Overall dimension(mm)
ARC-200
(ZX7-200)
1 Phase AC220 � 15%
32
7.1
63
20-200
28
-
40
85
0.93
5.5
313x140x198
ARC-250
(ZX7-250)
15
10
70
20-250
30
0-70
60
85
0.93
15
465x230x390
ARC-315
(ZX7-315)
20
13
70
20-315
32.6
0-100
60
85
0.93
18
500x210x345
ARC-400
(ZX7-400)
28
18
70
20-400
36
0-100
60
85
0.93
34
510x270x480
3 Phase AC380 � 15%
ARC
ARC-60
ARC-100
G-01
Paramter
Rated input voltage(V)
Rated input current(A)
Rated input capacity(KVA)
No-load voltage(V)
Output current(A)
Rated working voltage(V)
Drive adjustment(A)
Duty cycle(%)
Efficiency(%)
Power factor
Weight(kg)
Overall dimension(mm)
ARC Series Inversion DC Arc Welder(IGBT)1. Technology parameter�It uses advanced invert technology and powerful switch design (IGBT).
�It has the perfect functions in over-voltage,under-voltage, over current and over-loaded.
�It has high efficiency, small unload loss, save over 1/3 than the traditional welder.
�It can blance automatic when voltage is waving, with high resist to electrical wave(V±15%),
moreover welding perfect with 100m output cable.
�It is small and light, easily work in high alitude.
�It is easily arc,small flash, low noise, which can improve working surrounding.
�That above 500A can dig by compressed air and arc of carbon stick.It is used for welding
various of stainless steel, carbon steel, alloy steel, brass and titanium and so on.
�When switching to stick welding(MMA),down war welding function is available on cellulose
welding electrode.
�Normal Accessories:
Earth clamp 1pcs, fast joint 2pcs, allen-key 1pcs
ARC-500
(ZX7-500)
38
25
79
20~500
40
0~100
60
85
0.93
50
665x325x585
ARC-630
(ZX7-630)
52
35
79
50~630
44
0~100
60
85
0.93
58
700x350x645
2. Specification
ARC
ARC-315
(ZX7-315)
21
13.8
79
20~315
32.6
0~100
60
85
0.93
42
665x325x585
ARC-400
(ZX7-400)
28
18.4
79
20~400
36
0~100
60
85
0.93
43
665x325x585
AC380V±15%
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
3.0-16.0
3.0-16.0
� 16.0
4.0-15.0
� 15.0
Dia.Welding rod/
carloon rod
4.0/5.0
4.0/5.0
5.0/6.0
4.0/6.0/8.0
8.0/10.0
Adjustment
current(A)
40~315
40~400
40~500
150~500
350~630
Suitable model
ARC-315
ARC-400
ARC-500
ARC-500
ARC-630(Air gouging)
Carbon steel, Stainless
Steel, Alloy Steel
ARC-400
ARC-500
ARC-630
G-02
Paraamter
Rated input voltage(V)
Rated input current(A)
Rated input capacity(KVA)
No-load voltage(V)
Output current(A)
Rated working voltage(V)
Drive adjustment(A)
Duty cycle(%)
Efficiency(%)
Power factor
Weight(kg)
Overall dimension(mm)
ARC Series Inversion DC Arc Welder(MOSFET)
1. Technology parameter
�It adopts MOSFET invert technology,high frequency arc start design.
�It can balance automatic when voltage is waving, with high resist to electrical wave(V±15%).
�It has high efficiency,small unload loss,save over 40% than the traditional welder.
�It is small and light, easily work in high altitude.
�It is easily arc,small flash,low noise,stable welding arc,wonderful welding shape.
�With inner stalling protective circuit of over-heat,over-current,over-voltage and under-voltage,
==working safe is reliable.
�Normal Accessories:
Earth clamp 1pcs, fast joint 2pcs, allen-key 1pcs
2. Specification
ARC
ARC-400
(ZX7-400)
28
18
70
20~400
36
0~100
60
85
0.93
30
550x326x362
ARC-500
(ZX7-500)
32
26
70
20~500
40
0~100
60
85
0.93
32
550x326x362
ARC-200
(ZX7-200)
AC220V±15%
32
7.1
60
20~200
28
0~70
60
85
0.93
9
370x160x200
ARC-250
(ZX7-250)
15
10
70
20~250
30
0~70
60
85
0.93
17
475x205x300
AC380V±15%
ARC-315
(ZX7-315)
20
13
70
20~315
32.6
0~100
60
85
0.93
24
550x326x362
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
1.5-5.0
1.5-10.0
1.5-15.0
2-20
2-30
Dia.Welding rod/
carloon rod
2.5/3.2
3.2/4.0
3.2/4.0/5.0
3.2/4.0/5.0
3.2/4.0/5.0
Adjustment
current(A)
20-200
20-250
20-315
20-400
20-500
Suitable model
ARC-200
ARC-250
ARC-315
ARC-400
ARC-500
Carbon steel, Stainless
Steel, Alloy Steel
ARC-200
ARC-250
ARC-400
G-03
ARC-T
�Multi-station inverter power source, available 3 stations, 4 stations, 6 stations and other
multi-stations welding, easy installation and maintenance, less occupied area.
�Available on welding carbon steel, stainless steel, steel, alloy, alloy steel, cast iron.
�Adopt modular combination method, No effects between output stations, safe and reliable
�Adopt Advanced IGBT inverter tech, efficient and power-saving, steady welding
�Current can be preplace, digital current/voltage display, operated conveniently
�Available on welding with 50m-100m longth cable and various welding requirement,heated-
arc start current & forced current can be adjusted.
�Normal Accessories:
Earth clamp 1pcs, fast joint 2pcs, allen-key 1pcs
1. Application
ARC-T SeriesMulti-Station DC Inverter Welder(IGBT)
ARC-400 3T
ARC-400 6T
G-04
2. Specification
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input capacity(KVA)
Rated input current(A)
Output current range(A)
No-load voltage(V)
Duty cycle(%)
Drive adjustment(A)
Efficiency(%)
Power factor
Overall dimension(mm)
Weight(kg)
ARC-400 3T
(ZX7-400 3T)
50/60
18 � 3
84
20~400
79
60
0-100
� 90
0.93
1330 � 1072� 585
240
ARC-400 4T
(ZX7-400 4T)
50/60
18 � 4
112
20~400
79
60
0-100
� 90
0.93
1695� 730 � 585
300
ARC-400 6T
(ZX7-400 6T)
50/60
18 � 6
168
20~400
79
60
0-100
� 90
0.93
1695 � 1072 � 585
400
AC380V � N5%
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
3.0-16.0
3.0-16.0
� 16.0
Dia.Welding rod/
carbon rod
4.0/5.0
4.0/5.0
5.0/6.0
Adjustment
current(A)
40~400
40~400
40~500
Suitable model
ARC-400 3T
ARC-400 4T
ARC-400 6T
Carbon steel, Stainless
Steel, Alloy Steel
MZ
MZ SeriesDC Inverter Automatic Submerged Arc Welder
�It has stick welding and carbon arc welding functions, which is enhancing the equipment
utilization ratio;
�Current of arc and current of thrust force can be adjusted continuously;
�100% duty cycle meets requirements of high intensive work load;
�During welding process, it has low influence on the fluctuation of power netweok voltage;
�It has over-heat protection and excessive weldig-wire feeding protection;
�Low weight, small size;
�Developed operating tech, machine’s parameter can be preplaced accurately;
�Excellent welding performance, wide current adjustment range;
�Suitable with tooth shapes guide rail, available on large slope submerged arc welding;
�Suitable for stainless steel, carbon steel, heat-resisting steel, alloy metal, etc;
�Be widely used in industries as shipbuilding, boiler, chemical vessel, bridge girder, lifting
equipment, metallurgical.
�Normal Accessories:
Cable 5m and 500A welding electrode holder 1pcs, positive cable 15m, negative cable
10m,input cable 3m,10A insurance tube 2pcs, 5A insurance tube 2pcs
1. Application
MZ-1000
MZ-1250
G-05
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
4.0-10.0
8.0-20.0
� 20.0
Dia.Welding rod/
carbon rod
3.0/4.0
4.0/5.0
5.0/6.0
Adjustment
current(A)
250-630
350-1000
700-1250
Suitable model
MZ-630
MZ-1000
MZ-1250
Carbon steel, Stainless
Steel, Alloy Steel
2. Specification
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input current(A)
Duty cycle(%)
No-load voltage(V)
Output current(A)
Output voltage(V)
Efficiency(%)
Output characteristic
Power factor
Diameter of welding wire(mm)
Weight(kg)
Overall dimension(mm)
MZ-630
50/60
53
100
60~630
20-50
92
0.93
Ø2~Ø4
58
700 � 350 � 645
MZ-1250
55
120
100
60~1250
20-50
92
0.93
Ø3~Ø6
100
750� 350 � 730
MZ-1000
50/60
84
100
60~1000
20-50
92
0.93
Ø3~Ø6
95
750� 350 � 730
AC380V � 5%
SAW: 90 � 10% MMA:75� 10%
Decrease characteristic/Flat charateristic
CUT-100
(LGK-100)
50/60
15
260
30-100
120
80
85
0.93
45
665 x 325 x 585
CUT-160
(LGK-160)
50/60
30
275
20-160
144
80
85
0.93
55
665 x325 x 585
CUT Series Inversion Air Plasma Cutter
1. Application
�It uses advanced invert technology to accurate feedback control, stable output current.
�It can adjust current continuously when cutting, which can meet the demand of various
working material and cutting speed. And the cutting surface is smooth,distortion little,
cutting speed quick.
�It is small and light,easy move.With high load duration factor,it can save energy and electricity.
�With inner stalling protective circuit of over-heat, over-current, over-voltage and under-
voltage and lack compressed air pressure, the protective work reliability is strong.
�It can cut various of metal, such as carbon steel, stainless steel, brass and aluminum.
�Normal Accessories:
Earth clamp 1pcs, air pressure regulator 1pcs, earth cable 2m, hose hoop 2pcs, gas hose
0.6m,cutting torch 1pcs
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input capacity(KVA)
No-load voltage(V)
Output current(A)
Rated working voltage(V)
Duty cycle(%)
Efficiency(%)
Power factor
Weight(kg)
Overall dimension(mm)
2. Specification
CUT
CUT-40
(LGK-40)
AC220V±15%
50/60
4.8
230
20-40
96
60
85
0.93
8
440 x 170 x 290
CUT-60
(LGK-60)
50/60
7.9
260
20-60
104
60
85
0.93
18
475 x 205 x 300
AC380V±15%
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
0.3-16.0
1.0-25.0
1.0-30.0
1.0-40.0
Arc start
method
Touch
Touch
Un-Touch
Un-Touch
Adjustment
current(A)
20-40
20-60
20-100
20-160
Suitable model
CUT40
CUT60
CUT100
CUT160
Carbon steel, Stainless
Steel, Alloy Steel
Aluminum, Copper, Copper
alloy, Aluminum alloy
Perfect cutting on the half thickness of carbon steel, stainless steel and
alloy steel, when choosing available model.
CUT-40
CUT-60
CUT-100
G-06
CT
�3 Functions in 1 machine, Available on GTAW, Stick, Plasma Cutting.
�Available cutting on various thin steel metal
�Small size, lighter, easy operation, portable
�Normal Accessories:
Earth clamp 1pcs, fast joint 2pcs, earth cable 2m, allen-key 1pcs, water cooled TIG torch
1pcs, cutting torch 1pcs, air pressure regulator 1pcs, TIG torch 1pcs.
1. Application
CT SeriesDC Inverter Multifunction Welder
CT-312
CT-416
G-07
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
1.0-3.0
1.0-4.0
0.3-3.0
0.3-4.0
0.3-12.0
0.3-12.0
Welding type
MMA
MMA
TIG
TIG
CUT
CUT
Adjustment
current(A)
20-110
20-150
10-120
10-160
15-30
20-40
Suitable model
CT-312
CT-416
CT-312
CT-416
CT-312
CT-416
Carbon steel, Stainless
Steel, Alloy Steel
2. Specification
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input capacity(KVA)
No-load voltage(V)
Duty cycle(%)
Power factor
Efficiency(%)
Weight(kg)
Overall dimension(mm)
Input current(A)
Rated input current(A)
Adjustment current(A)
No-load voltage(V)
Welding/Cutting voltage(V)
Air pressure(L/min)
CT312
50/60
4
40
60
0.73
80
8
370 � 160 � 200
CT416
50/60
6
40
60
0.73
80
17
475� 205 � 300
TIG
13.8
120
10-120
55
14.8
2~5
MMA
23.2
120
10~120
55
24.8
-
CUT
14
30
10-30
220
92
80
TIG
26.4
160
10~160
62
16.4
2~5
MMA
34
160
10~160
62
26.4
-
CUT
31
46
10~40
260
96
80
AC220 � 15%
�It uses advanced invert technology and powerful switch design(IGBT).
�With 2T & 4T functions.
�When switching to stick welding(MMA), downwar welding function is available on cellulose
welding electrode.
�It has the pertfect functions in over-voltage, under-voltage, over-current and over-loaded.
�It has high efficiency, small unload loss, save over 1/3 than the traditional welder.
�It can balance automatic when voltage is waving, with high resist to electrical wave (V±15%).
�It is easily arc, small flash, low noise, which can improve working surrounding.
�That above 500A can dig by compressed air and arc of carbon stick.It is used for welding
various of stainless steel, carbon steel, alloy steel, brass and titanium and so on.
�Dual functions welder, TIG for root welding and MMA for arc cap welding.
�Normal Accessories:
Earth clamp 1pcs, fast joint 2pcs, earth cable 2m, allen-key 1pcs, water cooled TIG torch
1pcs.
TIG SeriesManual Arc / Argon Arc Welder(IGBT)
1. Technology parameter
2. Specification
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input current (A)
Rated input capacity(KVA)
No-load voltage(V)
Output current(A)
Rated working voltage(V)
Drive adjustment(A)
Duty cycle(%)
Efficiency(%)
Power factor
Weight(kg)
Overall dimension(mm)
Diameter of tungsten needle(mm)
TIG-315
(WS-315)
50/60
21
13.8
79
20~315
32.6
0~100
60
85
0.93
43
665 x 325 x 585
1.6~3.2
TIG-400
(WS-400)
50/60
28
18.4
79
20~400
36
0~100
60
85
0.93
45
665 x 325 x 585
1.6~4.0
TIG-500
(WS-500)
50/60
38
25
79
20~500
40
0~100
60
85
0.93
55
665 x 325 x 585
1.6~4.0
TIG-630
(WS-630)
50/60
52
35
79
20~630
40
0~100
60
85
0.93
60
700 x 350 x 645
1.6~4.0
TIG
AC380V±15%
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
1.0-12.0
1.0-16.0
1.0-20.0
Dia.Welding rod/
carloon rod
4.0/5.0
4.0/5.0
5.0/6.0
Adjustment
current(A)
40~315
40~400
40~500
Suitable model
TIG-315
TIG-400
TIG-500
Carbon steel, Stainless
Steel, Alloy Steel
TIG-315
TIG-400
TIG-500
G-08
TIG SeriesDual Hand/Argon Arc Welder(MOSFET)
1. Technology parameter�It adopts MOSFET invert technology, high frequency arc start design.
�It can balance automatic when voltage is waving, with high resist to electrical wave(V±15%).
�It has high efficiency, small unload loss, save over 40% than the traditional welder.
�It is small and light, easily work in high altitude.
�It is easily arc, small flash, low noise stable welding arc, wonderful welding shape .
�With inner stalling protective circuit of over-heat, over-current, over-voltage and under-voltage,
working safe is reliable.
�Dual functions welder, TIG for arc root welding and MMA for arc cap welding.
�Normal Accessories:
Earth clamp 1pcs, earth cable 2m, allen-key 1pcs, TIG torch 1pcs.
TIG
2. Specification
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input current (A)
Rated input capacity(KVA)
No-load voltage(V)
Output current(A)
Rated working voltage(V)
Drive adjustment(A)
Duty cycle(%)
Efficiency(%)
Power factor
Weight(kg)
Overall dimension(mm)
TIG-200
(WS-200)
AC220V±15%
50/60
32
7.1
60
20~200
28
0~70
60
85
0.93
10
370x160x200
TIG-250
(WS-250)
50/60
14.4
10
70
20~250
30
0~70
60
85
0.93
17
475x205x300
TIG-315
(WS-315)
50/60
20
13
70
20~315
32.6
0~100
60
85
0.93
26
550x326x362
TIG-400
(WS-400)
50/60
28
18
70
20~400
36
0~100
60
85
0.93
32
550x326x362
TIG-500
(WS-500)
50/60
32
26
75
20~500
40
0~100
60
85
0.93
32
550x326x362
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
0.3-6
0.3-10
0.3-12
0.3-15
0.3-20
Diameter of tung-
sten needle(mm)
1.6-2.4
1.6-3.2
1.6-3.2
1.6-4.0
1.6-4.0
Adjustment
current(A)
5-200
5-250
5-315
5-400
5-500
Suitable model
TIG-200
TIG-250
TIG-315
TIG-400
TIG-500
Carbon steel, Stainless
Steel, Alloy Steel
AC380V±15%
TIG-200
TIG-250
TIG-400
G-09
1. Technology parameter
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input current (A)
Rated input capacity(KVA)
No-load voltage(V)
Output current(A)
Rated working voltage(V)
Drive adjustment(A)
Duty cycle(%)
Efficiency(%)
Power factor
Weight(kg)
Overall dimension(mm)E��F
Overall dimension(mm)E��F
2. Specification
TIG-S SeriesInversion DC Argon Arc Welder(MOSFET)
�It adopts MOSFET invert technology, high frequency arc start design.
�It can balance automatic when voltage is waving, with high resist to electrical wave(V±15%).
�It has high efficiency, small unload loss, save over 40% than the traditional welder.
�It is small and light, easily work in high altitude.
�It is easily arc, small flash, low noise, stable welding arc, wonderful welding shape.
�With inner stalling protective circuit of over-heat, over-current, over-voltage and under-voltage,
working safe is reliable.
�Normal Accessories:
Earth clamp 1pcs, fast joint 2pcs, earth cable 2m, allen-key 1pcs, TIG torch 1pcs.
TIG-S
TIG-160S
(WS-160D)
50/60
15
3.3
42
10~160
16.4
-
60
85
0.93
10
410x160x290
370x160x200
TIG-180S
(WS-180D)
50/60
18
4
42
10~180
17.2
-
60
85
0.93
10
410x160x290
370x160x200
TIG-200S
(WS-200D)
50/60
20
4.6
42
10~200
18
-
60
85
0.93
10
410x160x290
370x160x200
TIG-315S
(WS-315D)
AC380V±15%
50/60
13.5
9
40
10~315
22
0~100
60
85
0.93
18
500x260x290
470x205x300
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
0.3-3.0
0.3-5.0
0.3-5.0
0.5-4.0
Welding type
WS DC TIG
WS DC TIG
WS DC TIG
WS DC TIG
Adjustment
current(A)
5-160
5-180
5-200
5-315
Suitable model
TIG-160S
TIG-180S
TIG-200S
TIG-315S
Carbon steel, Stainless
Steel, Alloy Steel
AC220V±15%
TIG-180S
TIG-200S
TIG-315S
G-10
TIG-P
�Adopt developed inverter tech.
�DC Stick(MMA),DC TIG, DC Pulse TIG 3 functions in one machine.
�Available on welding carbon steel, alloy steel, stainless steel, copper, silver, titanium, ect.
�With functions: Gas feed in advance, Delay Gas stop, Current climbing, Current Attenuating,
ect. moverover the parameter can be adjusted continuously.
�Available adjusted on pulse frequency & duty cycle ratio.
�Normal Accessories:
Earth clamp 1pcs, fast joint 2pcs, earth cable 2m, allen-key 1pcs, TIG torch 1pcs.
1. Application
TIG-P SeriesDC Inverter Pulse Welder(IGBT)
2. Specification
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Adkistment duty cycle(%)
Rated input capacity(KVA)
Rated input current(A)
Welding current(A)
Base current(A)
Pulse frequency(Hz)
Duty cycle(%)
Power factor
Weight(kg)
Overall dimension(mm)
TIG-200P
(WSM-200)
AC220� 15%
50/60
8-90
6.6
10.1
10~200
5~200
0.2~20
50
0.93
8
370 � 160 � 200
TIG-315P
(WSM-315)
50/60
8-90
9.7
14.7
5~315
5~315
0.2~20
60
0.95
45
665 � 325� 585
TIG-400P
(WSM-400)
50/60
8-90
13.8
20.9
5~400
5~400
0.2~20
60
0.95
48
665 � 325 � 585
AC380V � 5%
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
0.3-5.0
0.3-8.0
0.3-12
0.5-4.0
0.5-50
Welding type
DC TIG
DC TIG
DC TIG
DC TIG
DC TIG
Adjustment
current(A)
5-200
5-315
5-400
5-315
5-400
Suitable model
TIG-200P
TIG-315P
TIG-400P
TIG-315P
TIG-400P
Carbon steel, Stainless
Steel, Alloy Steel
Pure copper
(Red copper)
TIG-200P
TIG-315P
TIG-400P
G-11
TIG
�Adopt advanced inversion technology, with features of small volume, light weight, low
noise, energy-saving.
�High-speed dynamic response, little splash, good arc concentricity and outline.
�External pedal controller, adjustable current
�Obtaining different external power supply through thrust control
�DC function for welding stainless steel, alloy steel, carbon steel, copper and other non-
ferrous metal.
�AC square wave function for welding aluminum and aluminum alloy products.
�Normal Accessories:
Earth clamp 1pcs, fast joint 2pcs, earth cable 2m, allen-key 1pcs,TIG-315AC/DC with
water cooled TIG torch 1pcs, TIG-315AC/DC, TIG-250AC/DC with air cooled TIG torch.
1. Application
TIG-AC/DC Series InversionAC-DC Square Wave Argon Arc Welder(MOSEFT)
TIG-200
TIG-250
TIG-315
G-12
2. Specification
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input current(A)
No-load voltage(V)
Output current(A)
Drive adjustment(A)
Duty cycle(%)
Efficiency(%)
Power factor
Weight(kg)
Overall dimension(mm)
TIG-200AC/DC
(WSE-200)
AC220 � 15%
50/60
20
56
10~200
0~79
60
85
0.93
25
550 � 326 � 362
TIG-250AC/DC
(WSE-250)
50/60
9.6
45
10~250
0~100
60
85
0.93
30
550 � 326� 362
TIG-315AC/DC
(WSE-315)
50/60
14
45
10~315
0~100
60
85
0.93
32
550 � 326 � 362
AC380V � N5%
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
0.3-8.0
0.3-10.0
0.3-12.0
0.8-4.0
0.3-6.0
0.3-8.0
Diameter of tungsten
needle(mm)
1.2-2.4
1.6-3.2
1.6-4.0
1.2-2.4
1.6-3.2
1.6-4.0
Adjustment
current(A)
20-200
20-250
20-315
5-200
5-250
5-315
Suitable model
TIG200
TIG250
TIG315
TIG200
TIG250
TIG315
Carbon steel, Stainless
Steel, Alloy Steel
NB Series Inversion MIG/MAG CO2 Gas ShieldedWelder(IGBT) & NB-S Series Inversion CO2 GasShielded And Stick(MMA) Dual Functions Welder(IGBT)
1. Application
�It uses IGBT invert technology, stable output current, strong pressure-resist waving(V±15%),
high duty cycle, welding continualy for long time.
�It has electric reactor controller, stable welding course, small flash, deep liquid bath and
wonderful shape.
�It can adjust current and voltage separately. Changed one knob that can welder to choose
CO2/MAG, and cooperate with other kinds of air automatic welding machine.
�It is suit for welding 1.0mm and over steel plate
�NB-S series have decrease characteristic, available on stick(MMA) welding, carbon arc weld-
ing and CO2 gas shielded welding.
�Normal Accessories:
Earth clamp 1pcs, CO2 regulator 1pcs, electrode feeder 1pcs, Earth cable 2m, Control cable
5m, MIG torch 1pcs.
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input capacity(KVA)
Rated input current (A)
Rated working voltage(V)
Duty cycle(%)
Efficiency(%)
Power factor
Weight(kg)
Overall dimension(mm)
Output current range(A)
Output voltage range(V)
Diameter of input power cable(mm2)
Welding cable(mm2)
NB-350
50/60
14
21
34
60
85
0.93
43
665x325x585
60-350
15-40
� 3 x 4
� 35
2. Specification
NB
AC380V±15%
NB-500
50/60
25
38
40
60
85
0.93
50
665x325x585
60-500
15-50
� 3 x 6
� 50
NB-500S
50/60
25
38
40
60
85
0.93
50
665x325x585
60-500
15-50
� 3 x 6
� 50
NB-630
50/60
35
53
45
60
85
0.93
62
700x350x645
60-630
15-50
� 3 x 6
� 70
3. Guide of welding different metals
Material of work
piece Welding type
CO2/MAG
CO2/MAG
CO2/MAG
MG(Solid cored wire)
CO2(Flux cored wire)
CO2(Flux cored wire)
Dia.Welding wire
1.0/1.2
1.0/1.2/1.6
1.0/1.2/1.6
1.2
1.2
1.2/1.6
Adjustment
current(A)
50-350
80-500
100-630
260-420
120-300
120-450
Suitable model
NB350
NB500/NB500S
NB630
NB500/NB500S
NB350
NB630
Carbon steel, Stainless
Steel, Alloy Steel
NB-350
NB-500
NB-630
G-13
MIG-Y/F
�MIG-Y designed in combining electrode feeder with power source.
�Available welding on above 0.8mm thickness sheet metal
�Lower cost, higher effciency, improving the quality of welding
�Adjusted continuously on welding ampere & voltage, available on various welding
requirements.
�Steady, little splash, wonderful shaped.
�Normal Accessories:
Earth clamp 1pcs,CO2 regulator 1pcs, earth cable 2m, control cable 5m, MIG torch 1pcs,
MIG torch 1pcs, MIG-250F with electrode feeder 1pcs.
1. Application
MIG-Y/F SeriesInversion CO2 Gas Protection Welder
2. Specification
MIG-250F
MIG-250Y
G-14
3. Guide of welding different metals
Material of work
piece
Thickness
(mm)
� 0.8
� 0.8
� 0.8
� 0.8
Dia.Welding
wire
0.8/1.0
0.8/1.0
0.8/1.0
0.8/1.0
Adjustment
current(A)
50-200
50-250
50-200
50-250
Suitable model
MIG -200F
MIG-250F
MIG-200Y
MIG-250Y
Carbon steel, Stainless
Steel, Alloy Steel
Parameter
Rated input voltage(V)
Rated frequency(Hz)
Rated input current(A)
Output current(A)
Output voltage(A)
Duty cycle(%)
Power factor
Efficiency(%)
Electrode feed type
Electrode feed speed
Weight(kg)
Overall dimension(mm)
MIG-200F
(NB-200F)
50/60
29
50-200
15-26
60
0.93
85
Coil
2.5-18
18
475ñ205ñ300
MIG-200Y
(NB-200Y)
50/60
29
50-200
15-26
60
0.93
85
Embedded
2.5-18
45
594ñ300ñ695
MIG-250F
(NB-250F)
50/60
14
50-250
14-30
60
0.93
85
Coil
2.5-13
18
475ñ205ñ300
AC220 � 15% AC380 � 15%
MIG-250Y
(NB-250Y)
50/60
14
50-250
14-30
60
0.93
85
Embedded
2.5-24
45
594ñ300ñ695
VRRM
V
Outine
No
F1
F2E1
F3E2
F4E3
F5E4
F6E4
E7
E8
E9
E9E10E11
E9E10E11
E9E10E11
E9E10E11
Outine
No
A1
A2
A3C1
C2
C3
C4
C5
C6
C7
Standard Recovery Diodes
1. Feature�IF(AV)=5-5000A
�V RRM=100-5000V
�Hermetic metal case with ceramic insulator
�Hermetic glass-metal seal
�Metal case with ceramic insulator
�Conform to partial national standard GB/T8949.2-1999
�Capacity of supporting high surge current
�Stud cathode and stud anode version
3. Characteristics
2. Typical Application
�AC/DC Converters
�DC power supplies
�Mechine tool controls
ZP5-20A
ZP20-500A
ZP50-300A
ZA Disc Model
ZTa Disc Model
ZT Disc Model
Type
ZP100A
ZP200A
ZP300A
ZP5000A
ZP800A
ZP1000A
ZP1500A
ZP2000A
ZP2500A
ZP3000A
ZP3500A
ZP4000A
ZP5000A
Disc model
VFM
V
� 1.8100
~
5000
� 0.30
� 0.20
� 0.11
� 0.095
� 0.068
� 0.042
� 0.034
� 0.021
� 0.020
� 0.011
VRRM
VIRRM
mA
� 5
� N0
� 20
� 25
� 30
-40
~
150
Rjc
�/w
Tj
�
Wejght
g
70
85/200
100/285
200/370
225/425
290/535
650
755
1210
1260
1290
1320
1380
IF(AV)
A
100
200
300
500
800
1000
1500
2000
2500
3000
3500
4000
5000
IFSM
A
160
310
470
790
1300
1600
2400
3100
4000
4700
5500
6200
7900
Stud-model
IF(AV)
A
5
10
20
30
50
100
200
300
500
VFM
V
� 1.8
100
~
5000
� 1.6
IRRM
mA
� 2
� 6
� 12
� 15
-40
~
150
Rjc
�/w
Tj
�
Wejght
g
10
25
27
110
1140
205
325
470
925
IFSM
A
7.9
16
31
47
79
160
310
470
630
� 4.0
� 2.5
� 1.4
� 1.0
� 0.6
� 0.3
� 0.2
� 0.11
� 0.068
Type
ZP5A
ZP10A
ZP20A
ZP30A
ZP50A
ZP100A
ZP200A
ZP300A
ZP500A
ZP,ZA,ZT
G-15
Type
No
KP5A
KP10A
KP20A
KP30A
KP50A
KP100A
KP200A
KP300A
KP500A
Phase Control Thyristors1. Feature�IT(AV)=5-5000A
�V DRM/V RRM=100-5000V
�Hermetic metal case with ceramic insulator
�Hermetic glass-metal seal
�Metal case with ceramic insulator
�Conform to national standard GB/T8950.2-1999
�In accordance with IEC international electrical commoittee standard
3. Characteristic
2. Typical Application�DC motor controls
�Controlled DC power supplies
�AC switch and thermal control
�Synchronous motor esxitation
Disc types
Stud-model
IT(AV)
A
5
10
20
30
50
100
200
300
500
VTM
V
ITSM
A
8
16
32
48
80
160
320
480
800
100
~
2000
� 2.2
� 2.4
� 2.6
IDRM
mAIGT
mA
� 8.0
� 10
� 30
VGT
VIH
mA
VDRM
V
5~45
5~50
5~150
5~200
�
2.5
5~45
5~50
5~150
5~200
dv/dt
V/μs
� 50
� 100
� 200
di/dt
A/μs
100
Tj�
-40
~
+125
Rjc
�/w
� 3.0
� 2.5
� 1.0
� 0.5
� 0.14
� 0.11
� 0.11
� 0.08
� 0.04
Wejght
g
12
27
29
112
142
207
327
472
927
Outine
No
B1
B2
B3D1
D2
D3
D4
D5
D6
D7
Type
No
KP100A
KP200A
KP300A
KP500A
KP800A
KP1000A
KP1500A
KP2000A
KP2500A
KP3000A
KP3500A
KP4000A
KP5000A
IT(AV)
A
100
200
300
500
800
1000
1500
2000
2500
3000
3500
4000
5000
VTM
V
100
~
5000
� 2.6
IDRM
mAIGT
mA
� 15
� 30
� 45
VGT
VIH
mA
VDRM
V
15~200
15~250
15~300
15~400
dv/dt
V/μs
di/dt
A/μs
Tj�
-40
~
+125
Rjc
�/w
Wejght
g
Outine
No
� 2.5
� 3.0
� 3.5
15~200
15~250
15~300
15~400
�
200
�
100
� 0.11
� 0.11
� 0.08
� 0.04
� 0.026
� 0.020
� 0.020
� 0.012
� 0.010
� 0.010
� 0.010
� 0.010
� 0.010
ITSM
A
160
320
480
800
1280
1600
2400
3200
4000
4800
5600
6400
8000
75
90/205
105/290
205/375
230/430
300/540
655
760
1215
1265
1295
1325
1385
F1
F2E2
F3E3
F4E4
F5E5
F6E6
E7
E8
E9
E9E10E11
E9E10E11
E9E10E11
E9E10E11
VTM
V
VTM
V
--
KP5-20A
KP20-300A
KP20-5300A
KA Disc Model
KTa Disc Model
KT Disc Model
KTT Disc Model
KP,KA,KT
G-16
Type
Inverter Grade Thyristors1. Feature�IT(AV)=100-2500A
V DRM/V RRM=100-2500V�Metal case with ceramic insulator�Conform to national standard GB4193-1986�In accordance with IEC international electrical committee standard�High surge current capabilities�All diffused design, Center amplifying gate�Guaranteed high dV/dt�Guaranteed high dl/dt�Low thermal impedance,High speed performance
2. Typical Application�Inverters�Induction heating�Intermediate frequency power supply
2. Typical Application
BI-directional triode thyristor(triacs)1. Feature�IT(AV)=5-1000A�V DRM/V RRM=100-2000V�Hermetic metal case with ceramic insulator�Hermetic glass-metal seal�Metal case with ceramic insulator�Conform to partial national standard GB4193-1986�In accordance with IEC international electrical committee standard
�Quickspeed motor control�Thermal control�AC switch
3. CharacteristicStud-model
Disc model
Type No
KS5AKS10AKS20AKS30AKS50A
KS100AKS200A
IT(RSM)
AVTM
V5
10203050100200
� 2.6
VRRM
V
100ú
2000
IRRM
mA
30
IGT
mA
� 350 � 3.5
VGT
VIH
mA
� 250
dv/dtV/μs
� 100
Rjc�/W
Tj�
-40
~
+125
� 0.11
W ei gh tg
OutlineNo
102527110130165335
B1B2B3D2D3D4D5
KS200AKS300AKS500AKS800A
KS1000A
200300500800
1000
� 30
� 40
� 350
� 400
� 350
� 400
-40
~
+125
90/205105/290205/375230/430300/540
� 0.11� 0.08
F2E2F3E3F4E4F5E5F6E6
� 2.6
100
~
2000� 3.5
�
200 � 0.04
30-150
30-200
30-250
30-300
�0.11�0.11�0.08�0.05�0.04�0.02�0.02
F1F2E2F3E3F4E4F5E5F6E6
E7
IT(AV)
A100200300500800
10001500
ITSM
A160320480800
128016002400
� 30
tq
μs
�
30
JQM
ú
HNOR
Tj
�
Rjc
�/WWeight
Out-lineNo
7590/205
105/290205/375230/430300/540
670
VFM
V
600
~
2500
�
2.6
VRRMVDRM
V
IGT
mA
VGT
V
IRRMIDRMMA
� 40 0.5
-3.0
IH
mA
dv/dt
mA
�
200
di/dt
A/μs
�
100�
3.0� 80
KK100AKK200AKK300AKK500AKK800A
KK1000AKK1500A
30-150
30-200
30-250
30-300
KS5-20A
KS30-200A
KA Disc Model
KTa Disc Model
KT Disc Model
KS
G-17
Outline
Stud-Outine
OutineDimension(mm)
A1B1
A2B2
A3B3
C1D1
C2D2
C3D3
C4D4
C5D5
C6D6
C7D7
d
6
8
10
10
12
12
16
20
20
30
D
16
22
22
27
32
34
34
45
45
57
L
31
41
41
190
177
179
180
220
240
350
h
9
12
12
13
13
13
16
20
20
30
1
3
4
4
5
6.5
6.5
8
10
12
15
2
2
2
2
4
4
4
4
4
4
4
Convex OutlineDimension(mm)
E1
E2
E3
E4
E5
E6
E7
E8
E9
E10
E11
D
48
52
57
65
70
75
80
85
100
110
110
D1
25
31
36
41
47
52
57
63
76
78
78
A
26
26
26
26
26
26
26
26
26
26
35
Conave-Outline
OutlineDimension(mm)
F1
F2
F3
F4
F5
F6
D
39
49
56
62
66
75
D1
22
26
32
36
40
54
A
14
14
13
15
15
15
A
B
C
D
KS
G-18
Bridge Rectifier
SQL4 80-200A ZPQ 10-40A
4ZQ 10-40A 6ZQ 10-40A
5-35A
5-40A
5-40A
SQL3 20-100A
3. Characteristic
Type VFMV
VRRMV
IRRMmA
VISOLV
Tvj�
Weightg
OutineNO
KBPC5A-35A
QL115A-40A
QL225A-50A
QL320A-100A
QL480A-200A
SQL320A-100A
SQL480A-200A
ZPQ5A-40A
4ZQ5A-40A
6ZQ5A-40A
MDQ20A-100A
MDQ100A-200A
MDS20A-100A
MDS100A-200A
� 1.30
1.30
� 1.30
� 1.40
� 1.50
� 1.40
� 1.50
� 1.30
� 1.30
� 1.30
� 1.30
� 1.30
� 1.30
� 1.30
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
100-1600V
5
5
5
7
10
7
10
5
5
5
7
7
7
7
29
35
47
315
1200
315
1200
220
150
395
200
400
205
410
M
N
O
P
Q
P
Q
S
R
T
K
L
K
L
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
-40�
~
+125�
2. Typical Application�Eliminator supply
�Industrial automatic control
�Numierial-controlled machinery,telecontrol system
1. FeatureCurrent:5-200A
Voltage:100-1600V
All models feature the same compact dimensions to provide a uniform mounting pitch
Glass passivated diode chips
Excellent power/volume ratio
High thermal conductivity packge, electrically insulated case
QL,MDQ
G-19
Standard Recovery Power Modules
MD130-160A
MD25-110A
MD130-250A
MT200-300A
MT350-500A
255590
100110130160200250300350400450600800
4090
140155170210250320400480400640720910
1250
� 1.10� 0.51� 0.31� 02� 0.28� 0.17� 0.15� 0.11� 0.10� 0.08� 0.06� 0.04� 0.04� 0.03� 0.02
1. Feature�IT(AV)=5-5000A
�V DRM/V RRM=100-5000V
�6000RMS base plate � 3000RMS
�Industrial Standard Package
�High Surge Capability
�Simple Mounting
�Conform to national standard
�In accordance with IEC international electrical committee standard
Series IT(AV)
AIT(RSM)
AVTM
VIRRM
mATj�
Rjc�/W
VISO
sWeight
gOutineNO
IGT
mAVGT
VIH
mAdv/dtV/μs
VRRMVDRM
V
MT
255590110130160200250300350400450600800
4088
144176208256320400480560640720910
1250
� 1.5
� 1.8
� 2.0
600
~
2500
� 5
� 10
� 15
� 20
20
~
150
0.5
~
2.5
20
~
150
� 200-40
~
+125
� 1.10� 0.51
0.31� 0.28� 0.17� 0.15� 0.11� 0.10� 0.08� 0.06� 0.04� 0.04� 0.03� 0.02
� 2500
1601601601603703708458451410142014301440
A
B,C
C,D
Fa
E
OutineNO
3. Characteristic
Series
MD
IF(AV)
AIT(RSM)
AVFM
VVRRM
VIRRM
mATj�
Rjc�/W
VISO
VWeight
g
� 1.4
� 1.6
500
~
2500
� 5
-40
~
150
160160160
1603703708458451410142014301440
� 2500� 8
� 10
A
B,C
C,D
F
E
2. Typical Application�DC Motor Control and Drives
Battery Charges
�Welders
�AC/DC Converters
�DC power supplies
�Machine tool controls
MD,MT
G-20
MT600-1000A
MDS20-100A
MT(D) Welding
MDS150-200A
M** 130-250A Module
M** 25-110A Module
M** 350-500A Module
M** 130-160A Module
M**200-300A Module
M** 600-1000A Module
A B
C D
E F
MT,MDS
G-21
Bridge rectifier KBPC 5-35A
Bridge rectifier MD80*-280A Bridge rectifier 4ZQ10-40A
Bridge rectifier QL1 5-40A Bridge rectifier QL 5-40A
Bridge rectifier MD*20-100A
M N O
P Q R
S T L
Bridge rectifier ZPQ10-40A Bridge rectifier 6ZQ10-40A MDS 150-200A bridge module
D�T Series recorery diodeD�T Series recorery diode D�T Series recorery diode
Dimension
G-22