WELDING 2018

OVER 20,000 PRODUCTS

www.wurth.ie

2WELDING 2018

ElEctrodE wElding invErtEr Arc /liFt tig

EWI 200Art. No. 5952997200

Digitally controlled new technology IGBT inverter for ARC and LIF TIG welding.

Improved coolingExtremely improved cooling with two built incooling fans.Heat insulationHeat insulation class „H“ – electric components can work on temperatures up to 180 °C.IGBT technologyIGBT tehnology provides flowless welding under unstable voltage (working with generators).Mains fuseMachine requires only 20A mains fuseArc-Force:Increased voltage in order to weld with hardly soluble electrodes. Keeping slag on top of weld seam.Hot-Start:Ensuring easy arc start every time. No need for „scratching“ electrode over material.Anti-Stick:Lowers voltage in milliseconds in order toavoid electrode sticking to work piece.Celulose electrode modeBy choosing “celulose electrode mode” open circuit value is increased and easier celulose electrode welding start is provided.

Delivery scope

Designation Art. No.EWI 200 5952997xEarth cable 3m, 25mm2 59842601Electrode cable 3m, 25mm2 59842602Plastic case 19845106

Optional delivery:

Designation Art. No.LIFT TIG torch 09841500Carrying belt 19845102

Characteristics VrednostMax. Current 200ADuty cycle 160 A and 40 °C 20%Duty cycle 160 and 25 °C 40%Duty cycle 72 A and 40 °C 60%Duty cycle 130 A and 25 °C 60%IP protection IP 21SHeat insulation class H (180 °C)Open circuit voltage 70VMin. Generator power kVA 10 kVAMains fuse 20 AMax. Electrode dia. ARC welding 4 mm (5mm*)Max electrode dia. TIG welding 1,0-3,2mmEarth cable / electrode cable length 3mEarth / electrode cable cross section 25mm2

Weight 4,7 kg Dimensions L×W×H cm 38×12× 25 .5

*Max electrode dia. for short term welding. Note – machine is set to high power values(160-200 A)

Technical specifications

ElEctrodE wElding invErtEr Arc/liFt tig

EWI 160Br. art. 5952997160

Digitally controlled new technology IGBT inverter for ARC and LIF TIG welding.

CoolingExtremely improved cooling with two bult-in cooling fans.Heat insulationHeat insulation class „H“ – electric components can work on temperatures up to 180°CIGBT technologyIGBT technology provides flowless welding under unstable voltage (working with generators)Mains fuseIt can work with 16A mains fuseArc-Force:Increased voltage in order to weld with hardly soluble electrodes. Keeping slag on top of weld beamHot-Start:Ensuring easy arc start every time. No need for „ scratching“ electrode over material.Anti-Stick:Lowering voltage in milliseconds in order to avoid electrode sticking to work piece.

Delivery scope

Description Br. art.EWI 160 5952997xEarth cable 3m, 16mm2 59841601Electrode cable 3m, 16mm2 59841602Plastic case 19845106

Optional delivery:

Description Br. artLIFT TIG torch 09841500Carrying belt 19845102

Characteristics ValueMax. Current 160ADuty cycle 160A and 40°C 20%Duty cycle 160 and 25°C 40%Duty cycle 72A and 40°C 60%Duty cycle 130A and 25°C 60%IP protection IP 21SHeat insulation class H (180 °C)Open circuit voltage 75VMin. Generator power kVA 8 kVAMains fuse 16 AMax. Electrode dia. ARC welding 3,25 mm (4mm*)Max electrode dia. TIG welding 1,0-2,4mmEarth cable / electrode cable length 3mEarth / electrode cable cross section 16mm2

Weight 4,6 kg dimensions L×W×H cm 38×12× 25 .5

*• Max electrode dia. for short term welding. Note – machine is set to highest power 150-160A

Technical specifications

EWI 160

Description Art.No.

Lift tig torch for EWI160/200 with 1/4" air inlet (1/4" F to 3/4" M converter Art No. 0764 000 057 Direct Delivery)

0984 001 008

Earth cable 25mm2, 4m long, 300A earth clamp, 35-70mm2 plug 0984 001 009

Electrode cable 25mm2, 4m long, 300A electrode holder 35-70mm2 plug 0984 001 010

Description Art.No.

Male 16 Amp 250v plug 0969 700 316

Male 32 Amp 250v plug 0969 700 332

Schuko coverter plug with 13 amp fuse NCG0 000 015

Optional extras

EWI 160Art.No. 5952 001 160

Power options:

Power input: Schuko / Euro Plug

Please note that running this machine with a mains

fuse under 16 Amps will not enable you to run the

machine to full capacity and you will experience a

blown fuse or will cause trip in your power.

3 WELDING 2018 = Delivery 3+ days

ElEctrodE wElding invErtEr Arc /liFt tig

EWI 200Art. No. 5952997200

Digitally controlled new technology IGBT inverter for ARC and LIF TIG welding.

Improved coolingExtremely improved cooling with two built in cooling fans.Heat insulationHeat insulation class „H“ – electric components can work on temperatures up to 180 °C.IGBT technologyIGBT tehnology provides flowless welding under unstable voltage (working with generators).Mains fuseMachine requires only 20A mains fuseArc-Force:Increased voltage in order to weld with hardly soluble electrodes. Keeping slag on top of weld seam.Hot-Start:Ensuring easy arc start every time. No need for „scratching“ electrode over material.Anti-Stick:Lowers voltage in milliseconds in order to avoid electrode sticking to work piece.Celulose electrode modeBy choosing “celulose electrode mode” open circuit value is increased and easier celulose electrode welding start is provided.

Delivery scope

Designation Art. No.EWI 200 5952997xEarth cable 3m, 25mm2 59842601Electrode cable 3m, 25mm2 59842602Plastic case 19845106

Optional delivery:

Designation Art. No.LIFT TIG torch 09841500Carrying belt 19845102

Characteristics VrednostMax. Current 200ADuty cycle 160 A and 40 °C 20%Duty cycle 160 and 25 °C 40%Duty cycle 72 A and 40 °C 60%Duty cycle 130 A and 25 °C 60%IP protection IP 21SHeat insulation class H (180 °C)Open circuit voltage 70VMin. Generator power kVA 10 kVAMains fuse 20 AMax. Electrode dia. ARC welding 4 mm (5mm*)Max electrode dia. TIG welding 1,0-3,2mmEarth cable / electrode cable length 3mEarth / electrode cable cross section 25mm2

Weight 4,7 kg Dimensions L×W×H cm 38×12× 25 .5

*Max electrode dia. for short term welding. Note – machine is set to high power values(160-200 A)

Technical specifications

EWI 200

Description Art.No.

Lift tig torch for EWI160/200 with 1/4" air inlet (1/4" F to 3/4" M converter Art No. 0764 000 057 Direct Delivery)

0984 001 008

Earth cable 25mm2, 4m long, 300A earth clamp, 35-70mm2 plug 0984 001 009

Electrode cable 25mm2, 4m long, 300A electrode holder 35-70mm2 plug 0984 001 010

Description Art.No.

Male 16 Amp 250v plug 0969 700 316

Male 32 Amp 250v plug 0969 700 332

Optional extras

EWI 200Art.No. 5952 001 200

Power options:

Power input: Bare wire

Please note that running this machine with a mains

fuse under 20 Amps will not enable you to run the

machine to full capacity and you will experience a

blown fuse or will cause trip in your power.

ElEctrodE wElding invErtEr Arc/liFt tig

EWI 160Br. art. 5952997160

Digitally controlled new technology IGBT inverter for ARC and LIF TIG welding.

CoolingExtremely improved cooling with two bult-in cooling fans.Heat insulationHeat insulation class „H“ – electric components can work on temperatures up to 180°CIGBT technologyIGBT technology provides flowless welding under unstable voltage (working with generators)Mains fuseIt can work with 16A mains fuseArc-Force:Increased voltage in order to weld with hardly soluble electrodes. Keeping slag on top of weld beamHot-Start:Ensuring easy arc start every time. No need for „ scratching“ electrode over material.Anti-Stick:Lowering voltage in milliseconds in order toavoid electrode sticking to work piece.

Delivery scope

Description Br. art.EWI 160 5952997xEarth cable 3m, 16mm2 59841601Electrode cable 3m, 16mm2 59841602Plastic case 19845106

Optional delivery:

Description Br. artLIFT TIG torch 09841500Carrying belt 19845102

Characteristics ValueMax. Current 160ADuty cycle 160A and 40°C 20%Duty cycle 160 and 25°C 40%Duty cycle 72A and 40°C 60%Duty cycle 130A and 25°C 60%IP protection IP 21SHeat insulation class H (180 °C)Open circuit voltage 75VMin. Generator power kVA 8 kVAMains fuse 16 AMax. Electrode dia. ARC welding 3,25 mm (4mm*)Max electrode dia. TIG welding 1,0-2,4mmEarth cable / electrode cable length 3mEarth / electrode cable cross section 16mm2

Weight 4,6 kg dimensions L×W×H cm 38×12× 25 .5

*• Max electrode dia. for short term welding. Note – machine is set to highest power150-160A

Technical specifications

4WELDING 2018

Welding inverter Mig/rel/liF-tig

MIG 180-5Art. No. 5952 001 180

Digitally controlled new technology IGBT inverter for MIG welding of thin steel, or stainless steel sheets up to 1,5mm. Small 5kg weight D200 MIG/MAG wire spool.

3 in 1Three different welding modes - MIG, STICK and LIFT/TIGNO GAS functionNo GAS function provides outdoor work with gasless welding wire.Euro plugEuro plug with Abicor Binzel MB 15AK torch as a standard accessoryHeat insulationHeat insulation class „H“ – electric components can work at temperatures up to 180°C.IGBT technologyIGBT tehnology provides continual welding even under unstable voltage (powered by generators)Mains fuseMachine requires 20A mains fuse.

Delivery scope

Description Art. No.MIG 180-5 0708001319Earth cable 3m, 25mm2 (35-70mm2 plug) 0708001208

MB15 AK Torch 3m 180 A 0708001319Gas hose, 3m 0984250300

Optional delivery:

Description Art. No.LIFT TIG torch 0984001008Electrode cable 3m, 25mm2 (35-70mm2 plug) 0708001209

Characteristics Mig 180-55952 001 180

Max. Current 180ADuty cycle Imax , 40°C 25%Duty cycle 60% 40°C 140AIP protection IP 21SHeat insulation H (180 °C)Open circuit voltage 65VInput power kVA 7.4 kVAMin. Generator power kVA 10 kVAMains fuse 20 AMax. wire dia. Ø 1,0 mmEarth and electrode cable length 3mEarth / electrode cable cross section 16mm2

Weight 14 kg Dimensions L x W x H cm 50x22x38

Technical specifications

MIG 180-5

Description Art.No.

MB15 AK Torch 3m 180A 0984 160 130

Lift tig torch for EWI160/200 with 1/4" air inlet (1/4" F to 3/4" M converter Art No. 0764 000 057 Direct Delivery)

0984 001 008

Earth cable 25mm2, 4m long, 300A earth clamp, 35-70mm2 plug 0984 001 009

Electrode cable 25mm2, 4m long, 300A electrode holder 35-70mm2 plug 0984 001 010

Optional extras

Description Art.No.

Male 16 Amp 250v plug 0969 700 316

Male 32 Amp 250v plug 0969 700 332

Schuko coverter plug with 13 amp fuse NCG0 000 015

Description Art.No.

3/8 inch hose nozzle 0699 593 8

3/8 inch union nut 0699 516 38

Power options:

Optional gas fitting:

Please note that running this machine with a mains

fuse under 20 Amps you will not enable you to run

the machine to full capacity and you will experience a

blown fuse or will cause trip in your power.

Power input: Schuko / Euro Plug

Welding inverter Mig/rel/liF-tig

MIG 180-5Art. No. 5952 001 180

Digitally controlled new technology IGBT inverter for MIG welding of thin steel, or stainless steel sheets up to 1,5mm. Small 5kg weight D200 MIG/MAG wire spool.

3 in 1Three different welding modes - MIG, STICK and LIFT/TIGNO GAS functionNo GAS function provides outdoor work with gasless welding wire.Euro plugEuro plug with Abicor Binzel MB 15AK torch as a standard accessoryHeat insulationHeat insulation class „H“ – electric components can work at temperatures up to 180°C.IGBT technologyIGBT tehnology provides continual welding even under unstable voltage (powered by generators)Mains fuseMachine requires 20A mains fuse.

Delivery scope

Description Art. No.MIG 180-5 0708001319Earth cable 3m, 25mm2 (35-70mm2 plug) 0708001208

MB15 AK Torch 3m 180 A 0708001319Gas hose, 3m 0984250300

Optional delivery:

Description Art. No.LIFT TIG torch 0984001008Electrode cable 3m, 25mm2

(35-70mm2 plug) 0708001209

Characteristics Mig 180-55952 001 180

Max. Current 180ADuty cycle Imax , 40°C 25%Duty cycle 60% 40°C 140AIP protection IP 21SHeat insulation H (180 °C)Open circuit voltage 65VInput power kVA 7.4 kVAMin. Generator power kVA 10 kVAMains fuse 20 AMax. wire dia. Ø 1,0 mmEarth and electrode cable length 3mEarth / electrode cable cross section 16mm2

Weight 14 kg Dimensions L x W x H cm 50x22x38

Technical specifications

Welding inverter Mig/rel/liF-tig

MIG 180-5Art. No. 5952 001 180

Digitally controlled new technology IGBT inverter for MIG welding of thin steel, or stainless steel sheets up to 1,5mm. Small 5kg weight D200 MIG/MAG wire spool.

3 in 1Three different welding modes - MIG, STICK and LIFT/TIGNO GAS functionNo GAS function provides outdoor work with gasless welding wire.Euro plugEuro plug with Abicor Binzel MB 15AK torch as a standard accessoryHeat insulationHeat insulation class „H“ – electric components can work at temperatures up to 180°C.IGBT technologyIGBT tehnology provides continual welding even under unstable voltage (powered by generators)Mains fuseMachine requires 20A mains fuse.

Delivery scope

Description Art. No.MIG 180-5 0708001319Earth cable 3m, 25mm2

(35-70mm2 plug) 0708001208

MB15 AK Torch 3m 180 A 0708001319Gas hose, 3m 0984250300

Optional delivery:

Description Art. No.LIFT TIG torch 0984001008Electrode cable 3m, 25mm2

(35-70mm2 plug) 0708001209

Characteristics Mig 180-55952 001 180

Max. Current 180ADuty cycle Imax , 40°C 25%Duty cycle 60% 40°C 140AIP protection IP 21SHeat insulation H (180 °C)Open circuit voltage 65VInput power kVA 7.4 kVAMin. Generator power kVA 10 kVAMains fuse 20 AMax. wire dia. Ø 1,0 mmEarth and electrode cable length 3mEarth / electrode cable cross section 16mm2

Weight 14 kg Dimensions L x W x H cm 50x22x38

Technical specifications

5 WELDING 2018 = Delivery 3+ days

Contact Tip for Steel For welding torch MB 15 AK

1.0mm wireP.Qty. 1

Art.No. 0984 160 110

0.8mm wireP.Qty. 1

Art.No. 0984 160 108

0.6mm wireP.Qty. 1

Art.No. 0984 160 106

Contact Tip for Aluminium For welding torch MB 15 AK

0.8mm wireP.Qty. 5

Art.No. 0984 160 115

Insulated Liner PTFE 4m Wire guide for aluminium

wire 1.0 - 1.2mm wire.

P.Qty. 1

Art.No. 0984 300 05

Gas Shroud Nozzle Conical. For welding torch MB

15 AK.

Conical 16mmP.Qty. 1

Art.No. 0984 160 16

Conical 14mmP.Qty. 1

Art.No. 0984 160 14

MB15 AK TORCH 3M

Tip Holder For welding torch MB 15 AK.

P.Qty. 1

Art.No. 0984 160 18

Spring for Tip Holder For welding torch MB 15 AK.

P.Qty. 5

Art.No. 0984 160 13

MB15 AK Torch, 3m 180A Welding Torch.

Euro Connection. Image for illustrative

purposes only.

P.Qty. 1

Art.No. 0984 160 130

NOZZLES,CONTACT TIPS& CAPS FOR MB15AK

Shielding Gas Welding Wire SG2 Loose coil winding.

• For welding carbon steel

• Shield gas: CO2, argon

and mixed

• DIN 8559 SG2

0.6mm 1kgP.Qty. 1

Art.No. 0982 006 05

0.8mm 5kgP.Qty. 1

Art.No. 0982 008 05

Spot gas nozzle for welding torch MB 15 AK For welding torch MB 15 AK

P.Qty. 1Art.No. 098416015

WLV 17 TIG TORCH

CLAMPING SLEEVE

CLAMPING SLEEVE HOUSING

CERAMIC GAS NOZZLE

TORCH CAP

For ESI 150/ESI 200

Description Art. No. P. Qty.0984 001 008

1

Includes gold-tungsten electrode, 1.6 mm dia.

For WLV 17/WLT 17 K/WLT 26 TIG Torches

Dia. in mm

Matching clamping sleeve housing and tungsten electrode

Art. No. P. Qty.

1.0 0984 150 010 + 0984 150 110 0984 150 10

51.6 0984 150 012 + 0984 150 116 0984 150 162.4 0984 150 024 + 0984 150 124 0984 150 243.2 0984 150 032 + 0984 150 132 0984 150 32

For WLV 17/WLT 17 K/WLT 26 TIG Torches

Dia. in mm

Matching clamping sleeve and tungsten electrode Art. No. P.

Qty.

1.0 0984 150 10/110 0984 150 010

51.6 0984 150 16/116 0984 150 0122.4 0984 150 24/124 0984 150 0243.2 0984 150 32/132 0984 150 032

For WLV 17/WLT 17 K/WLT 26 TIG Torches

Size Nozzle inner dia. in mm Art. No. P. Qty.

5 8.0 0984 150 1556 9.5 0984 150 166

7 11.0 0984 150 17

For WLV 17/WLT 17 K/WLT 26 TIG Torches

Type Art. No. P. Qty.Long, L = 122 mm 0984 150 30

1Short, L = 27 mm 0984 150 35

Lift tig torch for EWI160/200 with 1/4” air inlet (1/4” F to 3/4” M converter Art No. 0764 000 057).

tig torch

6WELDING 2018

7WELDING 2018

ESSENTIAL HIGH QUALITY WELDING EQUIPMENT

Insulated Liner 4mWire guide for SG 2/SG 3

inert gas welding wire

0.6 - 0.9mm.

P.Qty. 1

Art.No. 0984 300 02

Insulated Liner PTFE 4mWire guide for aluminium

wire 1.0 - 1.2mm wire.

P.Qty. 1

Art.No. 0984 300 05

Ground Cable 4m Ground cable 16mm², 4m long, 300A

earth clamp, 35-70mm2 plug.

P.Qty. 1

Art.No. 0984 001 009

Electrode Holder 4m Electrode cable 16mm², 4m long, 200A

electrode holder, 35-70mm2 plug.

P.Qty. 1

Art.No. 0984 001 010

Welding inverter Mig/rel/liF-tig

Abicor Binzel MB 15AK torch Three different welding modes- MIG, STICK and LIFT/TIG

MIG 2 tact/4 tact welding

Spare parts

Description Art. no.

Earth clamp 300A 0984001300

Electrode holder 200A 0984002300

Ground cable 25mm2, 4m long, 300A earth clamp35-70mm2 plug 0984001009

Electrode cable 25mm2, 4m long, 200A electrode holder 35-70mm2 plug

0984001010

Wire feed roller 0,8mm-1.0mm (Aluminium) MIG180 0984180001

Wire feed roller 0,6mm-0.8mm (SG2) MIG180 0984180002

Wire feed roller 0,8mm-1.0mm (SG2) MIG180 0984180003

Optional delivery – welders cart (Cart+-31)Art. No.0984001005

Optional delivery – LIF TIG 4m torch

Rod Electrode Universal Blue

• Rod electrode: E 38 0 RC 11 EN ISO

2560-A

• AWS: A 5.1: E 6013

• Coating: rutile cellulose

• Good weldability in all positions, especially

in sloping positions

• Good gap closure

• Suitable for connecting steel to galvanised/

plain steel

• Easy slag removal

• Even weld texture

• Good re-ignition

• Highest operating temperature 350°C

2.5 x 350mmP.Qty. 300

rt.No. 0982 251

3.2 x 350mmP.Qty. 190

Art.No. 0982 325 1

4 x 350mmP.Qty. 120

Art.No. 0982 41

Rod Electrode Normal Green

• Rod electrode: E42 0 RR12 EN ISO

2560-A, AWS: A 5.1: E 6013

• Good weldability in all positions

• Good re-ignition

• Easy slag removal

• Clean weld texture

• Suitable for welded joints in steel

construction, vehicle construction…

3.2 x 350mmP.Qty. 130

Art.No. 0982 325

2.5 x 350mmP.Qty. 220

Art.No. 0982 25

Welding inverter M

ig/rel/liF

-tig

Abicor B

inzel M

B 15AK torch

Thre

e differe

nt welding m

odes

- MIG

, STIC

K and LIFT

/TIG

MIG

2 tact/

4 tact

welding

Spare parts

Descriptio

n

Art. no.

Earth

clam

p 300A

0984001300

Electr

ode h

older

200A

0984002300

Ground

cable

25mm2 , 4

m long

, 300A ea

rth cl

amp

35-70mm2 pl

ug

0984001009

Electr

ode c

able

25mm2 , 4

m long

, 200A el

ectrod

e hold

er

35-70mm2 pl

ug

0984001010

Wire

feed

roller

0,8mm-1.0mm (Alum

inium) M

IG180

0984180001

Wire

feed

roller

0,6mm-0.8mm (SG2) M

IG180

0984180002

Wire

feed

roller

0,8mm-1.0mm (SG2) M

IG180

0984180003

Optional d

elivery

– w

elders ca

rt

(Cart+-31)

Art. N

o.0984001005

Optional d

elivery

– LI

F TIG

4m torch

Welding in

verter Mig/rel/

liF-tig

Abicor B

inzel M

B 15AK torch

Thre

e differe

nt welding m

odes

- MIG

, STIC

K and LIFT

/TIG

MIG

2 tact/

4 tact

welding

Spare parts

Descriptio

n

Art. no.

Earth

clam

p 300A

0984001300

Electr

ode h

older

200A

0984002300

Ground

cable

25mm2 , 4

m long

, 300A ea

rth cl

amp

35-70mm2 pl

ug

0984001009

Electr

ode c

able

25mm2 , 4

m long

, 200A el

ectro

de ho

lder

35-70mm2 pl

ug

0984001010

Wire

feed

roller

0,8mm-1.0mm (Alum

inium) M

IG180

0984180001

Wire

feed

roller

0,6mm-0.8mm (SG2) M

IG180

0984180002

Wire

feed

roller

0,8mm-1.0mm (SG2) M

IG180

0984180003

Optional d

elivery

– w

elders ca

rt

(Cart+

-31)

Art. N

o.0984001005

Optional d

elivery

– LI

F TIG

4m torch

Tungsten electrode gold 8.7g

• Good ignition characteristics and long service life

• Suitable for DC and AC

• For WLV17/WLT17K/WLT26 TIG torch

Art.No. 0984 150 116

P.Qty. 10

8 WELDING 2018 = Delivery 3+ days

Weld Spray Perfect 400ml Biological welding protection spray for aluminium, construction steel, non-ferrous metals, stainless

steels and welding torch nozzles.

• Silicone free

• Solvent free

• Harmless when subsequently galvanizing and painting

P.Qty. 1/12

Art.No. 0893 102 100

Angle Magnet Magnetic angle fixer for fast holding and fixing during welding and soldering work and as a work aid.

• Accurate joining of flat, curved or round metal components

• Replaces “second man” during assembly, saving working time and costs

• Simple removal by tilting to the side.

• The magnetic angle fixer offers the following angles: 30°, 45°, 75° and 90° (see picture). Other

options: 105°, 120° and 180°

P.Qty. 1

Art.No. 0691 180

Welding Spray Plus 5L Biological welding protection spray for aluminium, structural steel, non-ferrous metals, stainless steel.

• Cooling effect

• Silicone-free

• Weld spray residues are easy to remove

• Free of hydrocarbons and other solvents

• Prevents burning-on of weld splatter on metals, VA materials and on welding torch nozzles

• A thin film simultaneously acts as temporary corrosion protection

P.Qty. 1

Art.No. 0893 102 005

9WELDING 2018

WLV17, WLT17K &

WLT26COMPATIBLE

Soapstone Chalk For flame-proof marking.

• White

• 10 x 100mm

P.Qty. 50

Art.No. 0984 400 5

Oil Marking Chalk For marking wood, cardboard,

textiles, cold and warm metal.

• Unwrapped

• Size 12 x 120 mm

• Hexagon shaped

P.Qty. 12

Ignition Gun For welding and cutting torch.

P.Qty. 1

Art.No. 0984 017 9

Portable Welding Protection Screen Equipped with welding protection curtain.

• Suitable for arc welding in line with

EN 1598

• Translucent orange welding

protection curtain

• Extremely stable base frame made

from square tubing (30x30 mm)

• Dimensions: Wall: W x H: 200 x

190 cm Curtain: W x H: 205 x

180 cm

P.Qty. 1

Art.No. 0984 770

STABLE ESSENTIAL

PROTECTION FORYOUR

WORKSHOP

Colour Art.No.

White 0984 400 1

Yellow 0984 400 2

Red 0984 400 3

Blue 0984 400 4

10 WELDING 2018 = Delivery 3+ days

Welding Helmet

• S4 welding helmet, infinitely adjustable

between DIN 9-13

• Three-way view thanks to side panels;

protection from two DIN 5 polycarbonate

side lenses

• Standards: EN 166 B, EN 175 B, EN

379, EN 12941

Airkos Respirator Unit

• Ergonomic face seal made from flame

retardant cotton

• 9 -10 hour battery life

• 180 or 220 l/min. flow velocity

• Noise level: max. 65 db (at 220 l/min.)

• Acoustic alarm: if a filter is blocked or the

battery is running low,

• Filter: 1 x type PRSL

• Hose length: 85 cm

AIRKOS WELDING HELMET WITH POWERED AIR RESPIRATOROptimum protection against welding fumes, flying particles and dust generated during the welding process and associated activities. The filters used for this device are used to filter particles.

P.Qty. 1

Art.No. 0984 743 400

ALL THIS COMES IN A

BAG!

INCLUDES:S4 helmet, respirator

unit with filter, air hose,

belt, lithium-ion battery

pack, air flow tester,

storage bag and usermanual

11 WELDING 2018 = Delivery 3+ days

Auto Darkening Solar Welding Helmet

• Ideal for all applications using a variety of welding processes

• Automatic mode for individualised and automatic adjustment of the

protection level

• Ergonomically designed helmet shell: protects the forehead, crown, ears

and neck perfectly.

• Lightweight and extremely comfortable

• Smoke-repellent design

• Protects against weld spatter and heat and protects during overhead

welding

• Comfortable four-way adjustable headband (height, width, angle and

longitudinal direction)

• Padded anti-sweat headband

• Protection level 9-13

P.Qty. 1

Art.No. 0984 700 200

Cepheus Welding Goggles

• Entry-level model for many different welding applications• Anti-glare filter• Protection level 3 when non-activated, protection level 11 reached in fractions of a

millisecond when activated• Recessed external lens• Prevents scratching the lens when taking off the helmet• Special smoke-repellent design• Lightweight and extremely comfortable

P.Qty. 1

Art.No. 0984 502 150

Flip-up Welding Goggles

• With close fitting goggle frame

• Fold-up glare protection

• Also fits over prescription glasses

• Indirect ventilation system for comfortable eyes

• Easy lens replacement

• Cellulose acetate clear lenses in fixed part

• Individually adjustable, comfortable head strap

• DIN 9, EN 166, EN 169

P.Qty. 1

Art.No. 0984 503 81

•

P.Qty. 1

Art.No. 0984 502 150

Automatic welding helmet WSH II 3/11

• • Lightweight and comfortable welding goggles

• Modern design

• Highly impact-resistant polycarbonate lens

• Special welding protection coating minimises welding spark burn-in

• UV and IR protection

• DIN 5, Complies with EN 166 and EN 169

P.Qty. 1

Art.No. 0984 650 100

12WELDING 2018

Flip-up Welding Goggles

• With close fitting goggle frame

• Fold-up glare protection

• Also fits over prescription glasses

• Indirect ventilation system for comfortable eyes

• Easy lens replacement

• Cellulose acetate clear lenses in fixed part

• Individually adjustable, comfortable head strap

• DIN 9, EN 166, EN 169

P.Qty. 1

Art.No. 0984 503 81

Nappa Leather Welding Gloves

• Touch-sensitive welding gloves for work

with excellent touch feel

• Palms and backs of hands made from

supple nappa leather

• Split leather cuffs

• Size 10

P.Qty. 1

Art.No. 0984 311

Full Grain Leather Welding Glove

• Robust welding glove for universal use

made from full grain cowhide

• Full grain cowhide palms

• Split leather backs and cuffs

• Very rugged and hard wearing

• Repellent to oil, grease and water

P.Qty. 1

Art.No. 0984 315

Split Leather Welding Glove

• Standard glove made completely of split

leather.

• No lining

• Size: 10

• Category II

• EN standard: 388, 12477A, 420

P.Qty. 1

Art.No. 0984 310

Standard Red Gauntlet

• Conforms to EN 388 levels 4-1-3-3• Conforms to EN 407 levels 4-1-3-X-4-X• Conforms to EN 12477 Class A• Heavyweight split leather• Fully lined• Welder style• Azo free

P.Qty. 1

Art.No. 0899 402 051

Premium Welding Glove

• Category: Cat. II• Palmside material: Split grain cowhide of top

quality• Palmside thickness: 1,2-1,4 mm• Upperhand material: Split grain cowhide of

top quality• Lining: Fully lined• Lining material: Jersey• Length range: 310-360 mm

P.Qty. 1

Art.No. 5966 140 486

Welder’s Apron - Full Leather

• With chest flap

• Universally adjustable leather straps

• Smooth surface

P.Qty. 1Art.No. 0984 313

Arm Protection

• Split leather sleeve to connect to the shoulder area

• With a drawstring around the wrist• Colour: natural• Length: approx. 56 cm

P.Qty. 1Art.No. 0984 318

13 WELDING 2018 = Delivery 3+ days

All Steel Quick Action Lever Clamp

• Simple and handy clamping tool, for flexible, elastic and sensitive

clamping

• With swivelling, case-hardened, electrogalvanised steel pressure plate

• Ratchet mechanism with sliding bar forged in one piece

• Extremely wear-resistant

Solid Steel Screw Clamp with Wooden Handle

• Easy and handy clamping tool for flexible, elastic and sensitive clamping.

• Dimensionally stable and warp-resistant even under high loads

• One-piece fixed and sliding bars heat-formed, hardened and galvanised

• Optimum adaptation and enhanced corrosion protection

• Movable pressure plate, galvanised

• Extremely wear-resistant and effortless to use

• Cold-hardened and burnished trapezoidal thread spindle

• Optimal power transmission

• Manageable wooden handle, riveted burr-free

200 x 100mm P.Qty. 1/10

Art.No. 0714 674 20

250 x 120mmP.Qty. 1/10Art.No. 0714 674 25

400 x 120mmP.Qty. 1/10Art.No. 0714 674 40

500 x 120mmP.Qty. 1/10Art.No. 0714 674 50

Description Art.No. P.Qty.Max. external clamping width: 160mm Overhang: 80mm Profile thickness: 7.5mm 0714 676 16 1 / 10

Max. external clamping width: 200mm Overhang: 100mm Profile thickness: 9.5mm 0714 676 20 1

Max. external clamping width: 250mm Overhang: 120mm Profile thickness: 10.5mm 0714 676 25 1 / 10

Max. external clamping width: 300mm Overhang: 140mm Profile thickness: 12mm 0714 676 30 1

Max. external clamping width: 400mm Overhang: 120mm Profile thickness: 12mm 0714 676 40 1 / 10

• Malleable cast iron bars• Connection hole on cast iron upper section• High tightening torque with butterfly screw for a secure grip

Pole welding clamp

150 x 60mmP.Qty. 1/10Art.No. 0695 964 11