RECORD OF WELDER QUALIFICATION TESTWQR NO: SD006 DATE: 24.07.2014

Welder's Name: STEFAN DUMITRU

ID 1570929131261WPS nr. 5005 approved by ABS on 14 Febr 2000Application FILLET WELDING

Supporting WPQR 400/09Sample ID SD

Material Qualified EH36 Diameter (Range Qualified) N/A

Plate Thickness mm 20 Thickness Range Qualified ALL

Weld Position Qualified O/H FILLET Carbon Equivalent 0.40 0.17 MAX

Welding Equipment DC Wire Stick Out N/A

Gas Flow Rate / Purge N/A Maximum Weld Bead Width 1 x ELECTRODE DIA

Preheat Method N/A Preheat Temperature N/A

Temperature Check / Control Method TEMPLESTICK Max Interpass Temp: (C) 150

Post Weld H.T. N/A Preparation Method WIRE BRUSH-GRIND

Gouging Method N/A NDT AS PER CONTRACT SPEC IFICATION

Side RunNos.

WeldingProcess

Electrodes Flux or GasShiled

WFSIPM

Amps

Volts WeldingSpeed

mm/secROL mm

HeatInput

KJmmSizemmTrade Name Pol.

1 1 SMAW 3.2 ESAB ok 48.60 E 7018 AC N/A - 95 10 23 - -

2 1 SMAW 3.2 ESAB ok 48.60 E 7018 AC N/A - 95 10 23 - -

3 1 SMAW 3.2 ESAB ok 48.60 E 7018 AC N/A - 95 10 23 - -

Testing was conducted by RAC SRL , see:- Report Magnetic Examination (MT) no 1289N/23.07.2014- Test Report 1300/24.07.2014

WITNESSED BY ABS:

DATE: 24.07.2014

OK WELDING MARINE LTDWelder training responsible:Eng. Adrian Penea

Pag 1 / 2

Appendix to Certificate WQR no. SD006Welder Name: STEFAN DUMITRUID: 1570929131261

Prolongation for approval by employer/coordinator for the following 12 months:

Date Signature & Stamp Position or title

Pag 2 / 2