Weld Plates SPAL 8S and SPAL 9S as Forged Parts - stauff.com · In the Heavy Series according to...
1
In the Heavy Series according to DIN 3015 (Part 2), SPAL Weld Plates made of Steel (STAUFF Material Codes W1, W2 and W3) with the STAUFF sizes 8S and 9S (DIN sizes 6 and 7) will be manufactured from now on as a one-piece design using the forging process as standard. Previously, these types – as is the case for the sizes and materials of all other STAUFF Weld Plates – were supplied as a multi-piece design with welded nuts. The new manufacturing method will now be applied for the first time for the sizes mentioned above so that STAUFF can continue to satisfy the claim to be a leader in terms of quality and technology in the field of industrial pipe, tube and hose clamps according to DIN 3015, with competitive conditions that satisfy the market. The advantage for the user is obvious: thanks to the improved mechanical properties of the forging stock, material can be saved at points that are not subjected to heavy loads, which leads to advantages in terms of weight compared to the previous designs. This can be seen when viewing the recesses on the undersides of the Weld Plates. As a matter of course, the design change has no negative impact on the mounting capability and resilience of the components. The transition to the new design will take place gradually starting in June 2013. The existing order codes remain unchanged. Technical Update April 2013 Edition 11 Weld Plates SPAL 8S and SPAL 9S as Forged Parts Walter Stauffenberg GmbH & Co. KG Postfach 1745 • 58777 Werdohl Im Ehrenfeld 4 • 58791 Werdohl Tel.: +49 (0) 23 92 / 9 16 - 0 Fax: +49 (0) 23 92 / 9 16 - 160 E-Mail: [email protected] www.stauff.com Previous design (detail view from below) New design (detail view from below) New design (bottom view) SPAL 8S M W1 (Steel, untreated) SPAL 8S M W2 (Steel, phosphated) SPAL 8S M W3 (Steel, zinc/nickel-coated) Weld Plates with Metric Threads SPAL 9S M W1 (Steel, untreated) SPAL 9S M W2 (Steel, phosphated) SPAL 9S M W3 (Steel, zinc/nickel-coated)
Transcript of Weld Plates SPAL 8S and SPAL 9S as Forged Parts - stauff.com · In the Heavy Series according to...
In the Heavy Series according to DIN 3015 (Part 2), SPAL Weld Plates made of Steel
(STAUFF Material Codes W1, W2 and W3) with the STAUFF sizes 8S and 9S (DIN sizes
6 and 7) will be manufactured from now on as a one-piece design using the forging
process as standard.
Previously, these types – as is the case for the sizes and materials of all other STAUFF
Weld Plates – were supplied as a multi-piece design with welded nuts.
The new manufacturing method will now be applied for the fi rst time for the sizes
mentioned above so that STAUFF can continue to satisfy the claim to be a leader in
terms of quality and technology in the fi eld of industrial pipe, tube and hose clamps
according to DIN 3015, with competitive conditions that satisfy the market.
The advantage for the user is obvious: thanks to the improved mechanical properties
of the forging stock, material can be saved at points that are not subjected to heavy
loads, which leads to advantages in terms of weight compared to the previous designs.
This can be seen when viewing the recesses on the undersides of the Weld Plates.
As a matter of course, the design change has no negative impact on the mounting
capability and resilience of the components.
The transition to the new design will take place gradually starting in June 2013.
The existing order codes remain unchanged.
Technical UpdateApril 2013Edition 11
Weld Plates SPAL 8S and SPAL 9S as Forged Parts
Walter Stauffenberg GmbH & Co. KG
Postfach 1745 • 58777 Werdohl Im Ehrenfeld 4 • 58791 Werdohl
Tel.: +49 (0) 23 92 / 9 16 - 0Fax: +49 (0) 23 92 / 9 16 - 160E-Mail: [email protected]
www.stauff.com
Previous design (detail view from below)
New design (detail view from below)
New design (bottom view)
SPAL 8S M W1 (Steel, untreated)
SPAL 8S M W2 (Steel, phosphated)
SPAL 8S M W3 (Steel, zinc/nickel-coated)
Weld Plates with Metric Threads
SPAL 9S M W1 (Steel, untreated)
SPAL 9S M W2 (Steel, phosphated)
SPAL 9S M W3 (Steel, zinc/nickel-coated)
