The information contained herein is subject to change without notice. The only warranties for Speedmaster™ products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Speedmaster™ shall not be liable for technical or editorial errors or omissions contained herein.

Welcome to the Speedmaster Team

Aluminum Serpentine Complete Engine Pulley Kit for Small Block Chevrolet

This serpentine pulley kit has been specifically made to fit a Small Block Chevrolet. The design gives the unique option of adjusting the belt tension via the bracket. If your application is for an engine other than a Small Block Chevrolet, please refer to the Speedmaster catalog for other applications including; Big Block Chevrolet serpentine pulley kits. Please read the instructions completely before installing this kit.

Serpentine Engine Pulley Kit

DOC:2.517.00001REV.2019

The information contained herein is subject to change without notice. The only warranties for Speedmaster™ products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Speedmaster™ shall not be liable for technical or editorial errors or omissions contained herein.

Warning! These instructions must be read and fully understood before beginning the installation. Failure to follow these instructions may result in poor performance, vehicle damage, personal injury, or death. If these instructions are not fully understood, installation should not be attempted.

Installation Instructions

A - 4x

B - 2x

C - 1x

D - 1x

E - 3x

F - 2x

G - 2x

H - 3x

I - 4 x

D* - 1x *Nut required for Bolt D

Note: When mounting any of the specified bolts to the engine, Speedmaster recommends that they be installed with some type of sealant such as Loctite #242. This is to overcome the high vibration ranges which the components are subjected to. Tightening torque’s of 20 ft./lbs. or 5/16” bolts, 30 ft./lbs. For 3/8” bolts and 40 ft./lbs. for 7/16” bolts are recommended. Please refer to the exploded views in each step for the overall assembly of this serpentine pulley kit.

**Bolts shownare actual size

Serpentine Engine Pulley Kit

DOC:2.517.00001REV.2019

The information contained herein is subject to change without notice. The only warranties for Speedmaster™ products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Speedmaster™ shall not be liable for technical or editorial errors or omissions contained herein.

1

2

A - 4x

B - 1x

C - 1x

Serpentine Engine Pulley Kit

DOC:2.517.00001REV.2019

The information contained herein is subject to change without notice. The only warranties for Speedmaster™ products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Speedmaster™ shall not be liable for technical or editorial errors or omissions contained herein.

3

4

B - 1x

D - 1xSecure with

Nut D*

E - 3x

Serpentine Engine Pulley Kit

DOC:2.517.00001REV.2019

The information contained herein is subject to change without notice. The only warranties for Speedmaster™ products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Speedmaster™ shall not be liable for technical or editorial errors or omissions contained herein.

5

6

G - 2x

F - 2x

H - 3x

Serpentine Engine Pulley Kit

DOC:2.517.00001REV.2019

The information contained herein is subject to change without notice. The only warranties for Speedmaster™ products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Speedmaster™ shall not be liable for technical or editorial errors or omissions contained herein.

7

I - 4x

Serpentine Engine Pulley Kit

DOC:2.517.00001REV.2019

The information contained herein is subject to change without notice. The only warranties for Speedmaster™ products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Speedmaster™ shall not be liable for technical or editorial errors or omissions contained herein.

Your Installation of the Speedmaster Serpentine Engine Pulley Kit is Complete

ENJOY...

Serpentine Engine Pulley Kit

DOC:2.517.00001REV.2019