Welcome to the 2003 Framon Catalog! · PDF fileWelcome to the 2003 Framon Catalog! ... Alpena,...

Welcome to the 2003 Framon Catalog!

2003 marks our 32nd year of manufacturingkey cutting machines, locksmith tools andsoftware for the industry. In addition to ourcatalog, we have also included a trial versionof our Genericode Me program. To check theprogram out, open the Framon folder on yourCD and run the Setup program. The programwill self-install and place an icon on yourdesktop. Double click the icon to run the pro-gram. If you have any questions or difficulties,feel free to give us a call at (989) 354-5623.You can also e-mail us [email protected].

Key Machines • Tools • Accessories

KX-1Multiple Function Code Machine

1997

SidewinderHigh Security

Automotive Duplicator1990

DBM-1Flat Steel Key Duplicator

1986

DC-300Code Duplicator

1988

MD-1Manual Duplicator

2001

FRA-2001Computer DrivenCode Machine

1997

TKM-100Tubular Key Machine

1982

ExpressSemi-Automatic

Cylinder Key Duplicator

2001

Framon #2Code Machine

1972

Precision KeyCutting Machines

MANUFACTURING COMPANY, INC.

2Framon Manufacturing Company 989 354-5623 http://www.framon.com909 Washington Ave., Alpena, Michigan 49707 Fax: 989 354-4238 E-Mail: [email protected]

Every Successful Enterprise Begins With A Good Idea AndSomeone Who Doesn’t Stop There...

Mike Agius Phil Agius Milt Clark Ann McConnell Darrell Sims John Reed

The original

Framon prototype

FRAMON MANUFACTURING COMPANY

Frank Agius began practicing locksmithing in 1959.He became frustrated with the unpredictablenature of key making devices of the time, anddesigned a code machine for his own use.Accurate to one-half thousandth of an inch (.0005"),the machine could cut depths ranging from .115" to.400" and accommodate practically any cylinderkey. The only problem now was determining themanufacturers’ depth and space information.

Frank sent out requests to most of the lockmanufacturers for this information. Only onereply was sent back, and it explained thatinformation on depths & spaces was not avail-able. With that, Frank sat down at the family’skitchen table armed with a set of dial calipersand began to decipher everything he couldabout various locks. Many nights were spentdetermining the spaces & depths of keys.Today, almost every manufacturer releasesthis information on request.

About this same time, word of Frank’s inventionfound its’ way to a few other locksmiths who wereinterested in the new machine. The first machinewas sold to Ed Phillips in Albany, NY. That samemachine is still in use today, and has never beenback for any repair.

Frank passed away in May of 2003 and passedthe company on to his daughter & sons. Inaddition to the manufacturing company, thefamily also operates a full time lock shop.Before any Framon key machine is introducedto the industry, it gets a thorough testing atFrank’s Key & Lock Shop.


Why buy a Framon? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Code Machines:Framon #2 (Also #1 & #2J) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7DC-300 Duplicating Code Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8TKM-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9KX-1 Code Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11FRA-2001 Computer-Driven Code Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Software:Framon TMK Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Genericode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Duplicators:Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15DBM-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Sidewinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17MD-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Drill Fixtures:DF-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Tools:Impressioning Tool,Plug Holder Set,Dial Calipers,Dual Read Dial Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Accessories:Worklight (Fits any key machine). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Framon Bypass Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Sidewinder Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Code Machine Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Cutting Wheels:Cylinder & Slotter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Demonstration Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

The Final Say:An Unmatched Warranty & Extras Only From Framon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Visit our Web Site. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

About Our CatalogFramon Manufacturing Company began producing key machines for the locksmith profession in1971. For years our exclusive focus was on key machines for that trade. With the advent of the DC-300 in 1988, we began to focus on key machines for the automotive market as well. Retail locationsare also a frequent user of some of our duplication equipment. In order to help you decide onwhich machine may be right for your application, each machine will carry the following icons:

The Framon Product Line

Automotive Application,such as a automotive dealer

Hardware Store/Retail Application

Locksmith Shop/Mobile Service

SpecialApplication


Why Buy a Framon?

The Framon #2 is built from steel and aluminum. Each machine ishand-fitted and thoroughly tested before shipment. Sealed ballbearings are used throughout the machine for long life and dura-bility. Other machines use small gears, bushings, and a lot of plas-tic in their build. The #2 is perfectly happy in the shop or in the van.A bumpy ride in a service van, extremely hot or cold climates won'taffect the accuracy of the machine.

No Room for MakingMistakes!The Framon #2 features a straight-in feed. This means that the keyalways approaches the cutter at a90° angle, and the cut depth onboth sides of the cut are the same.Other machines use a pivotingfeed, similar to most duplicatingmachines. The end result? Shallowand deep cuts typically have a"high" and a "low" side. This canlead to keys that turn the lock inone direction but not the other.

Close Tolerances Make for Precise Cuts!The Framon #2 is accurate to .0005" (one-half thousandth, about thethickness of a piece of hair) in both spacing and depth. What arethe spacing and depth tolerances of the other machines you areconsidering? Do they publish tolerances, or just say "It's accurate!"?

Our Products are built to last!

The Framon #2 is a Great Example of Pride of Workmanship!

All journals are mountedon ball bearings for accu-racy and durability. Thesefeatures are the trademarkof Framon Mfg. Co....Wefeel that only preciseequipment will produceprecise work.

Our cutters are made ofhardened steel or carbideand ground to tolerances ofplus or minus one-half thou-sandths of an inch.

“I operate three mobile vans andhave three Framons on them.

Two of them are #2's and the otheris a #1 (DC). As you can probablyguess I wouldn't be without these

machines. I have called Phil onseveral occasions to ask questionsor order replacement cutters and

he has always been extremelyhelpful. When I find someone who

gives excellent service I verymuch appreciate it.”

Ed HumesLocksmith Service Inc.


What else can you Expect!

We stand behind our Products!What type of warranty is included with the machine? If youwant to know how confident a manufacturer is in their product,take a look at their warranty. Framon machines carry a one-year parts, labor and freight warranty. Any Framon machinefound defective in the first year is picked up at your door,repaired or replaced, and dropped off at your door absolutelyfree! If your machine needs attention, it comes in one day andgoes out the next. With others, you will most likely pay thefreight to get the machine back, and then you can take anumber and wait for the repairs to be done. We build anexcellent product and back it with a superior warranty. It's easyto do, since repairs are a rarity at Framon!

A Must for any Key Cutting Specialist!What is included with the Framon #2 machine? The heart of the#2 Code Machine is the Depth & Space Manual. It includesover 300 pages of depth & space information, and over 900charts. Cutting information is included for auto, cylinder, high-security, cycle, safe deposit, locker, and desk locks. No otherkey machine manufacturer gives you this much information forfree. Also included are four cutters, five spacing blocks, and aset of stainless steel dial calipers.

Just ask Us!What kind of customer service can I expect? One of the mostimportant factors in your decision should be support after thesale. At Framon, key machines aren't our only business. We alsorun a full-service locksmith shop, just like you. When you callwith questions on your machine you're not just talking to one ofthe folks that make the machine, we're also locksmiths. Weknow all about the things you run into from day to day. Theperson that answers the phone can usually help you out orquickly or transfer you to someone who can.

“Dear Phil, Thank you very much for the new

depth and space manual you sent me.I have a very small shop,and most of

the time I get the run around from theother companies. I, like you, think

people are important. Framon is oneof the few companies that put peopleand the customer first. I have never

had a company respond the wayFramon did. My little request was justas important as a big order. Once

again, thank you so very much. My #2arrived in perfect condition, and

being a machinist myself was adjustedperfect, right on the numbers.”

Scott R. MeisterScott's Lock & Key Shop


FRAMON #2 MANUAL CODE MACHINE

That alone is probably the best way to describe the Framon #2 Code Machine. When you choose the #2, youenable yourself to originate almost any cylinder key in use today. Here are just a few of the keys you’ll be ableto cut with the #2:Standard Cylinder: Arrow, Corbin, Kwikset, Lockwood, Russwin, Sargent, Schlage, Weiser, WeslockDomestic Automotive: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford,GMC, Jeep, Lincoln, Mercury, Oldsmobile, Plymouth, PontiacForeign Automotive: Alfa Romeo, Audi, BMW, Diahatsu, Eagle, Fiat,Geo, Honda, Hyundai, Isuzu, Mazda, Mitsubishi, Nissan, Peugeot,Porsche, Renault, Saab, Saturn, Subaru, Suzuki, Toyota, Volkswagen,Volvo, YugoMotorcycle Keys: BMW, Harley-Davidson, Honda, Kawasaki,Suzuki, Triumph, YamahaPadlock Keys: Abus, Almont, American, Ilco, Master,McKinney, Slaymaker, Squire, WB, YaleLetterbox Keys: Auth, Couch, Eagle, Florence, Keil, L & F,Lyon, National, YaleSafety Deposit Box Keys: Diebold, HHM, Ilco, LeFebure,Miles Osborne, Mosler, S & G, Security, YaleInterchangeable Core: Arrow, Best, Falcon, Corbin-Russwin,Sargent, Schlage.High Security Keys: Emhart, Medeco Commercial & Bi-Axial, Assa, SchlagePrimus & Everest, Kaba PeaksTibbe 6 & 8 Wafer Keys can be cut with an optional vise fixture (see page 27)

The Real Beauty Of The Machine Is Its Low Cost…In addition to being less expensive than almost any other code machine, the year-to-yearcost of keeping your machine up to date is also lower than any others: zero! Because the#2 utilizes manufacturers’ depths & spaces to originate keys, all you need to do is copy newinformation into your book (blank pages provided). This information can be obtained in avariety of ways; the easiest is directly from the various trade magazines. Framon also main-tains a website, www. framon.com, where you can print out new depth & space charts asthey become available.

Recognized Throughout The Industry As The Most Accurate& Durable Code Machine Available

“This is more than a key machine-it is a key origination system.”October 1995 National Locksmith Article

TM

Possibly The Most Perfect Code Machine Ever Created…All of the extras included with the Framon #2 make it a great package. Here are a few of thefeatures that make it a perfect code machine:Accuracy: All Framon key machines are hand assembled and hand fit. This ensures that before your machine reach-es you, it has originated keys accurate to one-half thousandth of an inch (.0005”, about the thickness of a hair). This toler-ance assures a perfect key every time!Straight-In Feed: The #2 utilizes a straight-in feed approach. The straight-in feed of the #2 provides a perpen-dicular cut at the root of the key. The flat of the cut will always be the same depth from the left side of the cut tothe right. Machines that use a pivot approach can produce keys that turn one way but not the other. The drawingat the right shows the profile of a key cut by a machine that pivots. The different shear lines from the left to theright side of the key lead to the turning problem.Rugged & Durable: The #2 is made from heat treated aluminum and steel. The carriage moves forward on apair of steel slides. Spacing adepth movements take place on pairs of steel pins and screws. There are no smallgears to strip out and no plastic parts to wear out. We’ve heard plenty of stories from code machine owners whohave dropped the machine off of their workbench and cut a key with no adjustments needed!

FRAMON #1/#2/#2JAvailable with 110V AC or 12V DC Motor - no upcharge220V Motor Available at Extra ChargeDimensions: 10 1/2” W x 17” D x 8” HWeight: 36 lbs.See page 28 for optional cuttersSee page 27 for optional accessories

At Framon, we don’t believe in a lot ofoptional equipment. Here’s everything you get when you buy a #1,#2or #2J Code Machine.


SPACING: To cut a key, you need two dimensions:starting cut (distance from the shoulder to the firstcut) and spacing (distance between cuts thereafter),both found in the Depth & Space Manual. Schlagecylinder keys use .231" starting cut and .156" spacing.Starting cut is set by zeroing the machine and count-ing out to .231". Once set, the spacing block with.156" is aligned. Cut to cut spacing is a simple matterof aligning two index marks.DEPTH: Depth settings are made in .001" incre-ments by means of a micrometer. As shown at theright, reading a micrometer is quite simple. Figure #2shows a micrometer reading .275". The scale showsthe pointer is between .250" and .300". The dial reads.025" add .025" to .250" and you have .275". Themicrometer depth reading is what gives the #2 its’extreme accuracy. Once familiar with the machine,you’ll be code cutting keys in 30-45 seconds.

Figure #1

Figure #2

Spacing dial

Spacingblock

Scale

Pointer

Dial

Spacing crank

FRAMON #2 MANUAL CODE MACHINE

Everything You Need In One Package…

TM

Cutting Keys By Measurement…Unequalled Accuracy & Simple To DoThe #2 utilizes actual space & depth information to cut keys.Here’s how it’s done.....

The Framon Depth & SpaceManual is the core of theFramon #2. The keys mentionedabove are only a portion ofthose that you will have thecapability to cut.

The manual contains over 800cylinder. letterbox and safetydeposit charts.

FRAMON #1 MANUAL CODE MACHINE The Machine That Started It All…The Framon #1 is the predecessor of the #2. The #1 has a fixed spindle instead of a tilting version. If you’re just getting start-ed and don’t plan on cutting Medeco or Emhart keys, the #1 is the ideal machine. It can originate almost any cylinderkey in use today except, of course, Medeco or Emhart.If your plans change about cutting angled keys after you have the #1,a conversion kit is available for Medeco and Emhart keys.

The Framon #2J packs all of the features and benefits ofthe Framon #2, and adds everything you need to cutFolger Adam, Mogul, Southern Steel, and Adtec keys. Aspecial vise is included with the machine to clamp thelarger keys. An extension is added to the spacing crankto avoid interference with the head of these largerkeys. In addition to cutting all of the detention keys,the #2J can still be used to cut almost any cylinderkey you’ll come across. If detention key cutting isyour line of work, the #2J is your machine!

FRAMON #2J DETENTION CODE MACHINE

Accessories for Framon #2J

The Renowned #2 Code Machine Modified For Detention Use…

FC8735 Foreign Auto CutterFFS1045 .045" HSS Slotter

F2MSSB1 #1 Spacing BlockF2MSSB2 #2 Spacing BlockF2MSSB3 #3 Spacing BlockF2MSSB4 #4 Spacing BlockF2MSSB5 #5 Spacing BlockF2MSSB6 #6 Spacing Block

F2MS350 Depth & Space ManualF2MS451 6” Dial CaliperFC8445 Standard CutterF2MS552 Spacing ClipDCMS410 Brass ShimF2MS402 1/8" Allen WrenchF2MS899 Demonstration Video

F2SH11J/12J Jail ViseF2SH13J/14J Large & Small StopsDBC1103 .103” Carbide SlotterF2MSSBJ Jail Spacing BlockFC9063 Mogul CutterF2SH155 Handle Extension

Framon #1 & #2 additional parts

Framon #2J additional parts

Standard on all Framon #1, #2 & #2J Machines


DC-300 DUPLICATING CODE MACHINE

Tired of mis-cut keys due to outdated equipment?The DC-300 combines extreme accuracy (one -halfthousandth of an inch) with a simple space key anddepth cam system.

The DC-300 can both code cut keys as well as dupli-cate, saving money by utilizing one machine to doboth jobs.

Easy To Use To code cut keys on the DC-300, insert the properspace key and depth cam into the machine. Turnthe depth cam to the proper depth, line up thespace key with the proper space position, and pushthe carriage forward to make the cut. Repeat this procedure for the rest of the cuts on the key. Keys can be code cut in less than 30 seconds.

Duplication is Even Easier Turn the depth cam to any number 1 depth on any cam. Insert the original and blank key, and pushthe carriage forward to make each cut. Duplication takes less than 20 seconds.

The DC-300 also features a deburring brush, available in wire or nylon.

Saves MoneySince the DC-300 can both duplicate and code cut, there is no need for two machines. Both tasksare easily done on one machine!

Highly Accurate The DC-300 is precision engineered, and is constructed of steel and aluminum. The machine rarelyneeds to be adjusted, and holds tolerances of .0005”. Sealed ball bearings are used throughout themachine, ensuring years of use. The only maintenance required on the DC-300 is a regular cleaningand few drops of lubricant on the slide rod and depth plunger.

Easily Updateable As new code series are introduced, the DC-300 can be easilyupdated. In most cases, only a space key is required.Occasionally, a new depth cam will be needed as well.

See The DC-300 Application Chart On-Line at:www.framon.com

DC-300 Available with 110V AC or 12V DC Motor - no upcharge220V Motor Available at Extra ChargeDimensions: 10 1/2” W x 16” H x 6 1/4” DWeight: Approx. 33 lbs.

Combines Extreme Accuracy And Ease Of Use

TM


Framon’s TKM-100 is known throughout the industry as the foremostmachine in tubular key cutting. Everything you need to originatealmost any tubular key in use today is included with the TKM-100:

TKM-100 TUBULAR CODE MACHINE

Offset Left Center Offset Right 8-Pin(Ace) 8-Pin(Fort) 8-Pin(Segal) 9-Pin

Some of the keys that can be cut on the TKM-100

Leading The Industry In Tubular Key Cutting

TKMS451 Dial IndicatorF2MS899 Demonstration VideoTKSH107 Chicago/Dynalock/Unican CamTKSH109 Fort/American CamTKMS102 Ace Spacing PlateTKMS103 Offset Right PlateTKMS104 Offset Left PlateTKMS105 National Keyset PlateTKMS106 Ace Change-a-Matic PlateTKMS107 Segal 8 Pin PlateTKMS108 Universal Spacing PlateF2MS402 1/8” Allen WrenchTKMS401 3/16” Allen WrenchDCMS402 3/32” Allen Wrench

Why Code Cut When You Can Duplicate?Probably more than any other type of key, a tubular key wearsvery quickly. Due to the constant pressure on the face of the key,even original keys can be off .001” - .003”. By using a duplicator tomake a key, an inaccurate copy of a worn key is being made.When you use the TKM-100 to code cut a key, you’ll be making anoriginal key, accurate to .001”. A precision dial indicator is includ-ed with the machine, which enables you to decode a tubular keysfor duplication. Decoding takes only a few seconds.

Make Any Type Of Cut And Lots Of Them!With the TKM-100 you can make regular cuts, ward cuts, and mastercuts. The machine is equipped with a carbide cutter, which means youcan cut brass or steel and get long cutter life.

FRAMON TKM-100Available with 110V AC or 12V DC Motor - no upcharge220V Motor Available at Extra ChargeDimensions: 10 1/2” W x 16” D x 8” HWeight: 33 lbs.

One Collet For All Your Needs…The TKM-100 features a collet that can accommodate all three size tubular keys. No fumbling withchanging jaws or adapters. Simply tighten the chuck closer - the self adjusting collet easily acceptsany size key (Diameter .365 - .406).

“I have to say that Framonreally does have the best

customer service out there.You add that to a machine

that lasts a lifetime and doesall you need in the codedepartment and you justcan’t go wrong buying a

Framon. It’s pleasure to dealwith someone who treats you

like they appreciate your business.”

George HendersonAnother satisfied customer

TM


Revolutionizing High Speed Code Cutting

Part number for the KX-1 is KX1.A prefix is needed to specifywhich cams will be on themachine. Please see the kits onthe next page to determine thecorrect prefix. Example: For a KX-1 with Schlage cams andcutter, the order number wouldbe KX1-SC.

The KX-1 is designed to quickly and accurately codecut cylinder keys, and in particular, high security keys.The KX-1 uses interchangeable depth and space camsto cut just about any cylinder key in use today. Thecams take only seconds to interchange, and no adjust-ment is needed from one manufacturer to the next.

KX-1 CODE MACHINE

The machine has been tested thoroughly on lockssuch as Medeco, Assa, Schlage Primus, Kaba PEAKS,and Best. Kaba has already approved and recom-mends the machine for cutting its’ PEAKS .140 and .150keys. Assa offers the KX-1 to their end users for cuttingTwin 6000 and V-10 keys.

The machine is capable of cutting keys accurate to .0005” in about fif-teen seconds. For interchangeable core type keys, the vise has a built-

in tip stop. For others such as Medeco or Schlage, a shoulder stopproperly aligns the key.

When switching from one manufacturer to another, simply removean allen screw to take the cam off of the machine. Reinstall thescrew to put the new cam on the machine. Of course, dependingon which type of key you plan on cutting, a cutting wheel change

may also be necessary. Patented keys such as Medeco KeyMark mayalso need a vise change to properly hold the key.

When purchased, the KX-1 comes set up for whichever manufacturer you prefer. Additional cams,cutters and vises can then be purchased separately based on your needs. Kits are available for avariety of manufacturers - See page 11.

The KX-1 is ideal for institutional locksmiths using only one or two keysystems. Locksmiths who do large masterkey systems or routinely cuthigh security keys will also appreciate the new KX-1.

KX-1Available with 110V AC or 12V DC Motor - no upcharge220V Motor Available at Extra ChargeDimensions: 13” W x 13” H x 14” DWeight: Approx. 33 lbs.

Optional Cams for the KX-1

“Since 1988, ASSA has beenfurnishing our end users withthe KX-1 code machine. Weknow we can count on the

machine to make key cuttingan easy job. It is the mostaccurate and precise key

machine we have found forcutting our high security ASSA

key blanks. Add to that thefact the machine rarely

needs adjustment - a greatkey machine in every way!”

Tom Demont, AHC/CML National Sales Manager,

ASSA High Security Locks

TM

TM

TM


Ordering Information

CAM AND CUTTER KITS FOR THE KX-1Manufacturer Space Cam Depth Cam Cutter Vise PrefixArrow 1 S FC9045 Standard ARASSA** 2 A FC9032** ASSA ASBest A-2 13 P FC9054 IC/PEAKS B2Best A-3 13 N FC9054 IC/PEAKS B3Best A-4 13 M FC9054 IC/PEAKS B4Corbin D,H,Z System 70 3 B FC9054 Standard CDCorbin K,N System 70 3 D FC9054 Standard CKCorbin X System 70 12 E FC9054 Standard CXCorbin GH 4 X FC9090 Standard KWEmhart 3 F FC8612 Standard EMFalcon Standard 7 R FC9090 Standard FSFalcon I-Core 13 P FC9054 IC/PEAKS FIGrundman (UK) 16 G FC9051 Standard GRKaba PEAKS .140 15 P FC9054 IC/PEAKS K4Kaba PEAKS .150 13 P FC9054 IC/PEAKS K5Kwikset 4 X FC9090 Standard KWKwikset Titan* 14 X FC9090* Standard KTLockwood 20 U FC9045 Standard LKMaster 9 L FC9045 Standard MSMedeco Bi-Axial 6 T FC8612 Standard MBMedeco Commercial 5 V FC8612 Standard MCMedeco KeyMark 13 W FC9054 Keymark MKRuko (UK) 19 A FC9032 ASSA RKSargent C,R,L 10 J FC7863 Standard SRSargent U,R,K,G,T,UT 10 H FC7863 Standard SUSchlage (includes Primus) 8 C FC10031 Standard SCSchlage Tri-Ad (SFIC) 18 P FC9054 IC/PEAKS STWeiser 7 R FC9090 Standard WEYale Pro-Key (UK) 22 O FC9045 Standard YPYale Standard 11 K FC9045 Standard YA

* Kwikset Titan uses a different cutter for the first cut. If this second cutter is desired, an extra chargewill be applied to the machine. Please specify at time of order. ** ASSA Machine and Components only available thru ASSA, Inc.


The FRA-2001 is packed with features you’ll use daily. More than just a computerizedcode machine, here is just a sampling of the machine’s capabilities.

The Machine...

FRA-2001 COMPUTER -DRIVEN CODE MACHINE

Winner of ALOA’s Best New Product in 1998

(Laptop not included)

TM

FRA-2001Available with 110V AC or 220 V AC - (upcharge for 220V)Dimensions: 14” W x 15” D x 11” HWeight: 65 lbs.

Lookup & Cut A Key By CodeThe Codes section allows you to lookup almost any domestic or importedcode you’ll run into. You can alsosearch the database by key blank orpartial cuts. The program will alsoshow a progression chart for any par-tial code you enter. Once the code orprogression is determined, use themachine to originate your key.

In the Manufacturer’s section, the 2001’s software allows you to cut a key when the bitting is known. You cansearch alphabetically by manufacturer’s name, series or key blank number. Enter your own information fornew series, or make a customized chart. All database information is completely editable. Once you havechosen the chart you wish to cut a key for, simply enter the cut numbers and click the “Cut The Key” button. Ifyou simply want to generate a random key bitting for rekeying purposes, click the random icon and a bittingwill be generated. The software enables you to plunge cut or laser (profile) cut the key. An image of the keyto be generated can be viewed with the click of a mouse.

Application Setup Section

Machine History: Lookup Keys Cut On The Machine PreviouslyThe software includes a History database, where youcan enter your customers’ name and other pertinentdata to link with a key you have cut on the machine.Easy retrieval in the future is a snap - simply click themouse and your key is ready to be originated!

All movements of the FRA-2001 Code Machine are completely controllableby the user. If the machine ever needs adjustment, depth and spacing areadjusted from the Machine Section. Feed rate and other machine functionsare also adjusted from this section.

The FRA-2001 machine is completely controlled through a serial cable by oursoftware. The machine has no keypad or indentification numbers to be con-fused by when trying to cut a key. Once information is sent, the machine cancut a six-pin key in about 15 seconds. The two servo motors are covered by atwo-year warranty, and the control box is covered by a lifetime warranty. Ballscrews and sealed ball bearings are used for smooth motion on both axes. A reversible vise is included with the machine, complete with shoulder and tipstops. Sorry, the FRA-2001 does not make angled cuts for Medeco & Emhart.

The Software...Lookup & Cut A Key By Manufacturer


FRAMON TMK PLUSTMK Plus... Use it as a stand-alone program, or couple

it with the FRA-2001 Code Machine for the ultimate keying center!

Easily search forold customers

Choose Listor Form view

Navigation bar makes it easyto scroll through old systems,delete or create new ones!

Enter information aboutthe system; plenty ofextra room for additionalnotes and specifics.

Easily move betweenscreens; screens areordered top to bottom.Start with Customers, thenGenerate System, SelectLevel, View Bitting List,and View Selected.Maintenance allows youto customize settings.

First, choose which lockmanufacturer you wish togenerate a system for.

Make adjustments to theMACS, or decide if you wantto eliminate very deep orshallow cuts from the system.

The program automaticallygenerates a system for you.It is completely editable, andyou can regenerate it asmany times as you like. Youcan also enter your own sys-tem and use the CheckButton to look for possibleerrors.

Use the mouse to select whichlevel system you wish to gener-ate. Each level has differentoptions that can be selected.As the level is changed, moreor less options will appearabove.

Double-click the mouse in anyof the boxes to choose whichoption of the level you wish togenerate. Once the option isselected, you can begin toselect which keys will be partof the system.

System Setup Screen

Customers Screen

Select the Level of the System

Framon’s TMK Plus software is availableon CD. Minimum System Requirements:

486/75 Processor, Windows 95 or later,16MB RAM, 20 MB Hard Drive Space,

Mouse , VGA Monitor.

Part Number: F2MS855C

TM

Navigation buttons appear overthe bitting list. You can change

pages singly, or enter a pagenumber that you want to view.

You can also build a “Key Tree” tosee which selected keys will oper-

ate under different master keys.

Bitting List Screen

Use the navigation but-tons to scroll throughpages of the system.

Use the “tree view”to see a tree viewof the selectedkeys. Bulk labelingchanges can bemade in thisscreen.

Use Automaticor Manual keyselection whenchoosing keys.

Select keys you wish to include in thesystem by double-clicking on them. Red

keys are group masters, blue keys arepage masters, green keys are block

masters, and yellow keys are changekeys. Keys that have been highlightedturn light blue and will show up in the

selected key listing. Colors can bechanged in the Maintenance screen.

Enter information inthe “Key Details”box regarding UserLabel, Hardware,Location, andrequired keys.

A listing of all select-ed keys is shown.You can enter infor-mation about anykey in the system,such as hardware,labeling, and if youhave the FRA-2001,how many keys youwant the machine togenerate. A pinningchart is also shown

You can easily export the files from theprogram to a text format, view the “KeyTree”, and the program will even count

the number of pins you will need forthe chosen keys. Navigation buttons

on top let you scroll between differentkeys that have been selected.

View Selected Screen

• Copy & Paste • Pin Count • Printout Options • Rotating Constant Systems • Eliminate Very Shallow & Deep Cuts • Track Key Cutting• Framon’s Depth & Space Manual (Included)

More Features.....

• General Code Program: Lookup key information from a code number• Utility/Vehicle/Motorcycle/Padlock Programs: Lookup key information by manufacturer, model,

and input codes or cuts.• Key Blank Search: Don’t know the manufacturer? Find out if you know the blank number.• Depth & Space Program: Lookup depth & space information for virtually any lock in use today.• Locksmith Ledger Index: Find articles by subject dating back to 1985.• Progression Program: Displays a chart to progress keys when only partial cuts are known.

Here is what you get included with GenericodeTM:More than just a code lookup program

When looking up a code number , the screen shownbelow gives you all of the information you need to cut akey. Information for cutting the key is given for the fol-lowing machines: Framon #1, #2, DC-300, A-1’s Pak-A-Punch, ITL, Ilco Exacta, Curtis Clipper, HPC 1200, 1200PCH, & Codemax.


GENERICODE Code Retrieval SystemTM

Code Retrieval Screen Genericode Me

Code Retrieval Screen Genericode Dos

Some code programs boast of their numbers of codesincluded, claiming over two million; GenericodeTM

contains over 750,000 codes for combination padlocksalone! Add to that over 200,000 codes for ten cut GMand over 100,000 for ten cut Ford; doesn’t two millionseem a little light? GenericodeTM contains well over4,500 code series, ask others how many they have....

Other companies are happy to sell you a coderetrieval program, another program for progressioncharts, and another for missing cuts. GenericodeTM

gives you all of these programs at once, and you canrun any of them out of the same window.

Key blank information is shown for the following manufacturers: Ilco Standard, X, E-Z, Dominion, Curtis,Jet, Star, ESP, Borkey, Silca, Orion, and Original.

Progression ScreenGenericode Me

GenericodeTM runs on Windows 3.1, Windows 95 & 98.35 MB of hard drive space is required.GenericodeTM runs from Windows in a DOS window(restarting the computer in MS-DOS mode is notrequired). Genericode Me will run on Windows 95 &above and requires 135 MB of hard drive space.Screen resolution of 800 by 600 is required.

In addition GenericodeTM displays the keyway and cut key profile. If Information is available in Reed or Baxter codebooks, the volume is given.


EXPRESS Semi-Automatic Duplicator

Distinctive features of the EXPRESSsemi-automatic include:

The EPRESS quickly and accuratelyduplicates almost any cylinderkey effortlessly.

ConvenienceBuilt-in tip stops for shoulderless keyseliminates the need for key stops. Whencutting Best Keys, simply flip the tip stopover and tighten the thumb screws.

DurabilityRod wipers are included with the Express. During cuttingthese wipers keep shavings out of the guide rod housing, prevent-ing jamming of the yoke assemblly. All aluminum castings, hardened steelguide, and a premium CPM M-3 type 2 cutter ensure longevity and ruggedness.

All bearings on the machine are sealed ball bearings forconsistent accuracy and a maintenance-free long life.

Ease of UseWhen locked in key load position, user has 3 1/4”between cutter/guide and vises to ease loading. Depthadjustments can be made in .001 inch increments, notools required. The Express can accommodate keys upto 4 3/8” in length.

High Speed Duplication Made Easy!

EXPRESSAvailable with 110V AC or 220 V AC - (upcharge for 220V)Dimensions: 15” W x 11” D x 10” HWeight: 37 lbs.

TM


The Framon DBM-1 is designed to cut safety depositbox, locker, and padlock keys. This specialized flatkey duplicator will duplicate blanks up to 3 1/2” long.

The DBM-1 comes equipped with a .045” carbide slot-ter. After recent design changes, the DBM-1 now fea-tures a wire deburring brush (nylon also available).

All The Quality You’ve Come To Expect From Framon…Rotating Guide For Different Cutter Widths.The DBM-1 features a rotating guide which can be paired up to six different cutter widths. Widthsavailable in .035”, .055”, .066”, and .088”. A .100” cut can be made by pairing the .045” and .055”cutters.

DBM-1Available with 110V AC or 12V DC Motor - no upcharge220V Motor Available at Extra ChargeDimensions: 10 1/2” W x 16” D x 6 1/4” H Weight: 33 lbs.See page 28 for optional cutters

Wire Brush

Included

SAFETY DEPOSITBOX KEYSDiebold, Master, Yale Sargent & Greenleaf Victor, LeFebure,HHM, York.

LOCKER AND LETTER-BOX KEYSYale, National Eagle, Auth,Couch, Florence, Etc.

PADLOCK KEYSSingle and double sidedMaster.

Makes Fast Work Out Of Flat Steel Key Duplication

DBM-1 Flat Steel Key Duplicator

The Framon DBM-1: designed to do one job and do it right...Depth adjustments can be made in .001” increments. As with all Framon products, sealed ball bear-ings are used in the spindle. Built-in rod wipers keep the carriage rod clean as you cut keys.

You can expect years of trouble-free service from your DBM-1. Cut Master Padlock corrugated keys,locker, letterbox, and safety-deposit box. Even cut two keys at a time!

Rotating stylus changes easily to 6 differentguide widths of .035, .045, .055, .066, .088, .100.

Precise adjustments - no guess work.

Guide locks in rearward positionfor easy tip alignment, no spring pressure.

TM


Small And Compact, The Sidewinder Can Handle All OfYour Needs…The compact Framon Sidewinder has been the professionals’choice since it was introduced to the market in 1990. It’sdesigned to quickly and accurately duplicate automotive highsecurity keys such as Mercedes 2 & 4 Track, BMW, Lexus, Infiniti,Volvo and Saab.

A Complete Key Cutting ‘Station’When you choose the Framon Sidewinder, you don’t justget a duplicating machine. Four cutters come standardwith the Sidewinder. Two 5/32” and two 3/32” cutterscome with each machine. The 5/32” is used for cuttingmost high security keys. The 3/32” is used for centercut keys such as Lexus. These cutters are made ofcarbide and cobalt for long life and durability.

You’ll also receive free Volkswagen/Audi vises forthe machine. No need to purchase any additionalcomponents to do the job.

Easy Operation…With the Sidewinder, you won’t have cumbersome rods and levers to control the carriage. Noadapters or special clamps to hold keys. What you will get is a pair of reversible vises that will holdalmost any high security key in use today. Built-in tip stops for larger keys - a handy drawer to storeextra cutters - about one minute to duplicate a key - the features don’t stop there......

Durable ConstructionAs locksmiths around the world have come to expect, ball bearings areused extensively throughout the machine. Aluminum and steel construc-tion means you’re buying a machine that will hold its’ tolerances andhold up to rough use. Make the bestchoice - the Framon Sidewinder. SIDEWINDER

Available with 110V AC or 12V DC Motor - no upcharge220V Motor Available at Extra ChargeDimensions: 6” W x 14” D x 10” HWeight: 33 lbs.See page 26 for optional cuttersSee page 26 for optional accessories

SIDEWINDERHIGH SECURITY AUTOMOTIVE DUPLICATOR

“I own one of yourSidewinder key machines. Itried all of the others at ashow and found that yours

was the best suited for origi-nating keys. I've had it for

about 2 years now and havenever had a problem with it.”

- Ken CoxEugene, OR

Note: Our Sidewinder machine isdesigned as a duplicating machine, but

with space and depth keys, you can origi-

nate side-milled keys with it.

TM


MD-1 MANUAL DUPLICATOR MACHINE

Framon Manufacturing Company is proud to introduce our newest key machine, the MD-1.The MD-1 is a manual duplicator designed for locksmiths, automotive dealerships, and hardwarestores to cut a wide variety of keys without the need of additional accessories. Here are just a few ofthe features of the MD-1:

• Can accept keys up to 4” in length• 1 7/8” of cutting travel• Wire deburring brush included (nylon also available)• 1/4 hp motor included (12 volt available - upcharge for 12 volt motor)• Reversible vises hold a wide variety of keys without tipping• Flip-down key stop for aligning shoulders or tips of keys• Adjustable guide (.001” increments)• Carriage wipers to keep chips off of yoke rod• Sealed ball bearings in spindle assembly

MD-1 Available with 110V AC, 12V or 220V 12V DC Motor and 220V MotorAvailable at Extra ChargeDimensions: 12” W x 15” H x 6” DWeight: Approx. 29 lbs.

TM

One of Our Two New Machines for 2001!

Framon’s MD-1 offers you the ability to cut almost any cylinder key in use today.Keys can be cut quickly, easily, and accurately. If adjustments are ever needed,they can be made in .001” increments. The MD-1 carries Framon’s one-year, parts,labor and freight warranty.


The modern way to open safes, money chestsand GSA containers

Provides precise drilling at any positionon lock, such as fence, gates, boltscrews or relockers.

Quick release and installation ofdrilling unit saves time. Drill unitcan be removed for hole inspec-tion and returned to original posi-tion in seconds. No need to adjustalignment each time. Absolutecontrol of drill pressure.

Completely adjustable. Oncemounted on safe, adjustmentscan be made to any area on safelock without removing unit.

FRAMON DF-I SAFE DRILLING FIXTURETM


Another quality product by Framon Manufacturing Co. thatmakes key impressioning easier than ever. This tool is self-con-tained; it needs no wrenches and has no screws to strip out.This tool holds practically any key blank; keys will not rock orslip. The firm hand grip provides complete control whenimpressioning keys.

PART # ...................................IMMS001

6 inch steel dial calipers are easy to read and extremelyaccurate. A must for the progressive locksmith cutting keys bymeasurement. Case included.

PART # ....................................F2MS451

For locksmiths doing tubular key work, this dial indicator is amust. Use it for decoding keys or checking machine accura-cy. Easy to read and simple to use. Graduations in .001"

PART # ....................................TKMS451

Plug vises that are adaptable for plugs from .480" dia. to .550"dia. These vises can be hand held or held in a bench vise.Only two vises are needed. Plugs, when loaded, will rotate inthe vises in the same manner as in the cylinder shell. The visecan be adjusted to any tension. The key blank will not dropbelow the radius of the plug so the shear line can be main-tained. High pins will show up when the plug is rotated in thevise. Made from solid steel for durability with the usual Framonprecision.

PART # ....................................PHSH001

These four tools make a handy addition to any lockshop. They’ve been tested regularly in our own lockshop. Read on for the details...

IMPRESSIONING TOOL

TOOLS

PLUG VISES

DIAL CALIPERS

DUAL READ DIAL INDICATOR


KEY MACHINE/BENCH WORKLIGHTAdd some light to your van or shop. Framon’s worklight can be

easily added on to any key machine or workbench. The worklightuses a 40W appliance bulb, and features a quick-disconnect cou-

pler. The coupler makes it easy to move the light from machine tomachine; all that is needed are a few extra mounts. The worklight

comes with one mounting stud. An L-bracket is available for verticalapplications. A flange stud makes it simple to mount the worklight to abench.

Worklight (Includes MS1 Stud) .................F2MS560L-Bracket (Vertical Mount)..........................F2MS561MS1 Stud (Horizontal Applications) .......F2MS564Flange Stud (Bench Mount)......................F2MS562

110V AC MOTOR1/12 hp 42 Frame 1725 RPM 3/8” ShaftAC motor used on older Framon #2 and all older Framon machineswith exposed motor. This motor uses an external relay and hasreversible rotation. PART #. . . . . . . . . F2MT002

12V DC MOTOR1/10 hp 42 Frame 1800 RPM 3/8” ShaftDC motor used on all 12V Framon machines. An excellent choice whenreplacing an older motor on other machines.

PART #..............................F3MT002

110V AC MOTOR1/6 hp 48 Frame 1725 RPM 1/2” ShaftAC motor used on newer Sidewinder, TKM-100, and DBM-1 machineswith enclosed motor, and newer #2 code machines.

PART # ..........................DCMT002

110V/12V MOTOR ADAPTER BRACKETThis bracket is available for #2 Code Machine owners who wish to useboth 12V and 110V motors on the same machine.

PART # ............................F3MT004

F2MS561 F2MS562 F2MS564

OPTIONAL ACCESSORIES

MOTORS

CUTTERS* 5/32” Cutter and Guide

Use for all side milled keysGHCC156 5/32” carbide cutterGHMS156 5/32” guide

* 3/32” Cutter and Guide Use for cutting Lexus and other center cut keys

GHCB093 3/32” cobalt cutterGHMS093 3/32” guide

3mm Cutter and Guide Use with some depth & space keys, recommendedfor Audi/VW high security keys

GHCB3M 3mm carbide cutterGHMS3M 3mm guideAll cutters & guides are 3/16” diameter. * denotes cutter supplied with machine at time of purchase.


FRAMON BYPASS TOOL

SIDEWINDER ACCESSORIESAUDI/VW HIGH SECURITY KEY ACCESSORIESVises only are needed to cut these keys. A 3mm cutter and guide are recommendedGHCB3M 3mm cutterGHMS3M 3mm guideGHSHAUD Audi/VW vise setGHSHAUDI Audi/VW kit includes

vises, cutter and guideSpecial cutters and guides can be special ordered for almost any application. Call for details.

The new Framon Bypass Tool allows you to gain quick access to apopular door knob which requires a rekeying tool to remove thecylinder. When the rekeying tool is unavailable, the Bypass Toolallows you to remove and repair or replace the cylinder in less thanfive minutes (without the rekeying tool, your only other options arepicking or impressioning the lock).

By drilling a small hole in the cylinder face, the retainer can beremoved and the cylinder rekeyed easily. Replacement scalp platesare included with the tool and are easily replaced. Reinstall theretainer and spring, and the lock is back in working shape!

Included with the BYP2 kit is a drill bit, pin punch, six scalp covers forvarious lock styles & finishes, and the fixture itself.

Save Time & Money!

PART # .......................BYP2

CHIP SHIELDA chip shield is now availableas an add-on item for existingSidewinder key machines.Installation takes less than oneminute. The shield directschips toward the back of thekey machine.

PART #...............................GHMS461

Framon’s new T-Handle coverkeeps out dirt, road grime andsalt, extending the life of yourcustomer’s lock. Slips over easilyand can be moved to the sidewhen locking or unlocking, orsimply remove it. Works with allpickup capper T-handles. Sold in packs of fifty.PART #...............................F2MS775


CODE MACHINE ACCESSORIESDOUBLE SIDED VISEThis vise will hold the wide, deeply milled blanks such as X160, X161, X176and X184 that tend to tip in the standard vise. The reverse side of the visehas a built-in tip stop and special millings to hold all of the inter-changeable core keys firmly. The vise eliminates the need for shimsand wires to hold these blanks. Fits Framon #1 or #2 Code Machines.

PART #.............................F2SH050

SPACING BLOCK SET FOR SAFETY DEPOSIT BOX KEYS29 different key series on three spacing blocks. Diebold, Hearing HallMarvin, Mosler, S & G, Security, York, LeFebure, Victor, Yale and others.Kit includes instructions. Invaluable for Framon owners who do depositbox work. PART # .............................FSMSDB1

FMSDBC2 includes F2MSDB1 plus .055", .066" and .088" high speed steelslotters. Instructions included. PART # ............................FMSDBC2

With carbide slotters...............PART #............................FMSDBC3

TIBBE KEY ATTACHMENTAn attachment for cutting Tibbe keys. This unit will fit all Framon CodeMachines and comes complete with a .088” carbide slotter andinstructions on use. This unit will cut both the 6 wafer and 8 wafer Tibbekeys that are used on Ford and Jaguar autos. These keys can now becut quickly and accurately at a very low cost to Framon CodeMachine owners. PART #...............................F2SH070

SPACING BLOCK SET FOR DOMESTIC AND IMPORT SPACING60 different spacings from .045" to .170". Includes Ford 10 wafer spacingand VB series w/ double cuts. These blocks snap in and out of thespacing block holder and fit all existing Framon machines. Includesnew spacing clip for tip-stopped keys. PART #................................FSB1001

KEYMARK VISEA special vise is needed to cut Medeco KeyMark keys.

PART # ..................F2SH061

DEPTH & SPACE MANUAL - 2001 EDITION VOLUME 10 08/03This edition contains depth and space information for Domestic, Import,Flat Keys and Safety Deposit Keys. It’s the largest and most comprehen-sive Depth and Space Manual available. Newly formatted, the Depth &Space Manual gives progressive spacings as well as spacing block reference numbers. PART # ....................... FSMS350


USED FOR

Filler Slotter

Cabinet & Mailboxes

Auth, Couch, Eagle, National

S & G, Victor, Florence

HHM, S & G, Yale, York, Diebold

LeFebure, Mosler

USED FOR

Kaba Special

Sargent Special

Standard All Purpose

Medeco & Emhart

Foreign Auto

Assa Twin & V-10

General Use

Grundman Special

Kaba Peaks, Corbin-Russwin, Falcon, Best

Mogul

Weiser, Kwikset, Weslock

Schlage

General Wide Angle

Assa UK Special

Zeiss-Ikon

OLDPART NO.

––––––

C-10

CC-1001

CC-001

––––––

CC-9032

CC-1

––––––

––––––

––––––

CC0100B

––––––

CC-01

––––––

––––––

FLAT

.063"

.063"

.045"

.012"

.035"

.032"

.045"

.051"

.054"

.063"

.090"

.031"

.045"

.016"

.012"

ANGLE

72˚

78˚

84˚

86˚

87˚

90˚

90˚

90˚

90˚

90˚

90˚

100˚

100˚

104˚

110˚

PARTNUMBER

DBC 1035

DBC 1045

DBC 1055

DBC 1066

DBC 1088

DBC 1103

WIDTH

.035"

.045"

.055"

.066"

.088"

.103"

WIDTH

.020"

.030"

.045"

.055"

.066"

.088"

USED FOR

Small Letter Box

Auth, Couch, Eagle, National, Yale

Auth, Couch, National, Ilco, Mosler, S & G, Victor

Yale, Diebold, HHM, S & G, Security, York

Ilco, LeFebure, Mosler, Security

Prison Locks - Southern Steel

PARTNUMBER

FFS 1020

FFS 1030

FFS 1045

FFS 1055

FFS 1066

FFS 1088

CUTTING WHEELS

Double AngleMilling Cutters

Carbide Slotters High Speed Steel Slotters

FLAT

ANGLE

M-2 & M-3 TOOL STEEL

4

2

1,2,3

1

1,3

2

1,3

PARTNUMBER

FC7263

FC7863

FC8445

FC8615

FC8735

FC9032

FC9045

FC9051

FC9054

FC9063

FC9090

FC10031

FC10045

FC10416

FC11012

ALL CUTTERS .375 I.D. - 2.375 O.D. + .0005 TOLERANCE1. Denotes cutter supplied with #2 Code Machine 3. Denotes cutter supplied with #1 Code Machine

2. Denotes cutter supplied with #2J Code Machine 4. Denotes cutter supplied with DBM-1 Code Machine


ORDER FORM

Name

Shop Name

Address

City

State Zip

Phone Visa Mastercard Discover

Expiration Date Signature

FREE DEMO!

909 Washington Ave.Alpena, MI 49707

(989) 354-5623Fax: (989) 354-4238

e-mail: [email protected]

Learn cutting procedures for the Framon #2, TKM-100, DBM-1, Sidewinder,

KX-1 and FRA-2001 all on an information-packed demonstration video tape from

Framon Manufacturing Co.Inc.

FRAMON MANUFACTURING

COMPANY

The tape is free to usefor 30 days. Justreturn the tape inits original ship-ping box (whichreverses to returnshipping) on or beforethe date indicated on thebox. If you choose to keep thetape, your credit card will be billedfor $20. All information below must becompleted. Please allow 2 weeks for delivery.

Precision Tools forthe Locksmith

Profession

909 Washington Ave.,Alpena, MI 49707

(989) 354-5623 Fax: (989) 354-4238

DEMONSTRATIONVIDEO TAPE


THE FINAL WORD...A FEW MORE REASONS TO CHOOSE A FRAMON....

An Unmatched Warranty!At Framon, we’re proud of the products we make. Every key machine carries a one-year, parts, labor andfreight warranty. If you have any problems with your key machine in the first year, we will issue a call tag, pickup the machine, and repair or replace it within 2 days of receiving it. Not a dime out of your pocket - we eventake care of the freight! After the first year, there is a labor charge to repair a machine plus parts costs. Thesame 2 day service means you won’t be waiting weeks for your machine. How can we offer such exceptionalservice? The biggest reason is that we make quality equipment - rarely do we get repair work. Where many keymachine manufacturers use bushings, we use sealed ball bearings. Where others use plastic, we utilize steeland aluminum. This assures a machine that will serve a long life under the most extreme conditions - andkeeps it in the owners hands, not on a shelf waiting to be fixed!

Technical Help...We can answer questions over the phone regarding depths & spaces for new code series. Framon codemachine owners only need the depths & spaces to cut a key - one phone call gives you the ability to cut newkeys if you don’t already have the information!

Experienced Locksmiths...In addition to making some of the finest key machines available today, we also operate a lockshop in north-ern Michigan. This enables us to understand your needs firsthand, as well as ‘get our hands dirty’ with newproducts in the marketplace. If you call for technical help, you’re not talking to someone who has never seena lock cylinder - you’re talking to a fellow locksmith!

We’re Easy To Reach...Our hours are Monday through Friday, 8:00 AM to 4:30 PM eastern standard time. You can contact us by regu-lar mail, e-mail ([email protected]), fax, or phone. We’ll be happy to help you out with any questions youmay have about any machines, tools, or depth & space information. Feel free to call!

We’re now on

the internet!

http://www.framon.com

Check us out!

REPLACEMENT PARTS

Framon #1, #2 Code Machines TKM-100 SIDEWINDERDrive Belt ................................................... F2MS601 Drive Belt.............................GHMS601 Drive Belt ...........................F2MS601Key Stop .................................................... F2MS551 Older TKM-100 use.......... TKMS601 Hand Held Tip Stop.......GESH029Standard Vise ......................................... F2SH060 Cutter ................................... TCA1001 Vise Set ...........................GHSH0601Depth Plate (.100, .150 markings).... F2MS102 Collet ................................... TKSH017Depth Plate Pointer............................... F2MS104 DBM-1Spacing Block Indicator..................... F2MS105 Wire Brush...........................DCMS252Compression Spring ............................ F2MS001 Nylon Brush .......................DCMS251

(vise springs) Drive Belt.............................GHMS601Spacing Clip ........................................... F2MS552

MMAANNUUFFAACCTTUURRIINNGG CCOOMMPPAANNYY

PPrroodduuccttss

Framon #2

TKM-100

DC-300

KX-1

FRA-2001

DBM-1

Sidewinder

Express

MD-1

DF-1

Tools

Software

Accessories

www.framon.com

909 Washington Ave.Alpena, MI 49707

[email protected]

(989) 354-5623

Maybe it is time for you to

check out our website.

http://www.framon.comfor

Individual Product Information

Product Updates & New Releases

TMK Plus Software and the FRA-2001

Description of Product andit’s featuresLinks to Product Accessories & CuttersDistributors

DBM-1 Flat Steel Key Machine

Our Depth & Space Manual Sets the Standard for the Locksmith IndustryWith over 300 pages of depth & spacing information and over 900 charts, no other manufacturer gives you this much information for free.Cutting information for: Auto, cylinder, high-security, cycle, safe deposit, locker, and desk locks.

An Award WinningCombination

for ComputerizedCode Machine

Work!

The New Framon Bypass Toolallows you to remove,repair or

replace the cylinder in less thanfive minutes.

Distributed by –

Precision Tools for the Locksmith Profession

MADE IN THE USA

KX-1Multiple Function Code Machine

ExpressSemi-Automatic

Cylinder Key Duplicator

SidewinderHigh Security

Automotive Duplicator

DBM-1Flat Steel Key Duplicator

MD-1Manual Duplicator

FRA-2001Computer DrivenCode Machine

TKM-100Tubular Key Machine

Framon #2 Code Machine

Framon Manufacturing Company 989 354-5623 http://www.framon.com909 Washington Ave., Alpena, Michigan 49707 Fax: 989 354-4238 E-Mail: [email protected]

DC-300Code Duplicator

Welcome to the 2003 Framon Catalog! · PDF fileWelcome to the 2003 Framon Catalog! ... Alpena,...

Documents

Transcript of Welcome to the 2003 Framon Catalog! · PDF fileWelcome to the 2003 Framon Catalog! ... Alpena,...