WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd...

23
WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) - 6 th Adv. & Computer Programming – 7 th Computer Maintenance – 8 th Digital Electronics (DE) – 9 th

Transcript of WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd...

Page 1: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

WELCOME to Mr. Reed’s (H104)

Intro to Eng. Design (IED) – 1st

Digital Electronics (DE) – 2nd

Flex. Manufacturing – 3rd

Intro to Eng. Design (IED) - 6th

Adv. & Computer Programming – 7th

Computer Maintenance – 8th

Digital Electronics (DE) – 9th

Page 2: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

PERIOD PERIOD BEGINS PERIOD ENDS SUBJECT

1st 7:45 am 8:30 am Intro to Eng Design

2nd 8:35 am 9:30 am Digital Electronics

3rd 9:35 am 10:20 am Flexible Manufacturing

4th 10:25 am 11:10 am LUNCH

5th 11:15 am 12:00 pm CONFERENCE

6th 12:05 pm 12:50 pm Intro to Eng Design

7th 12:55 pm 1:40 pm Computer Programming

8th 1:45 pm 2:30 pm Computer Maintenance

9th 2:35 pm 3:20 pm Digital Electronics

Page 3: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

SAFETY

• MOST IMPORTANT THING WE DO EVERYDAY!• Notice how this is the first thing I am going over

other than welcome.• NOW: DO NOT TOUCH anything in this room

outside of the seating area. DO NOT GO ANYWHERE ELSE in this room

• LATER: We will establish new boundaries, and we will have different safety hazards to explain.

Page 4: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

EMERENCY PROCEDURES

EVACUATION

Fire / Explosion / Smell of Smoke / Gas Odor / Fire Alarm / Bomb Threat

LOCKDOWN

Intruder/Weapon/Hostage/Active Shooter/Hostile Individual/Criminal Activity/Dangerous Animal

TORNADO/SEVERE WEATHER

REVERSE EVACUATION

Suspicious / Threatening person / Hazardous Chemical spill OUTSIDE building

Page 5: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

EMERENCY PROCEDURES

TornadoH107

Lockdown

Fire

Page 6: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Admin

• Lot of Changes 1st Week• Attendance/Seating Arrangement• Tomorrow (Tuesday) we will have 1-on-1s• Accountability Memos • Dual Credit (8th period)-Comp. Prog.

Page 7: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• 9-WEEK GRADES:• Daily Work (HW, Participation, Pop Quiz, etc.)

40%• Test Grades (at least 3 per 9 weeks) 60%

• IPRs, EN may be Daily or Test Grades• Projects will be considered Test Grades

Page 8: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• SEMESTER GRADES:

• 1st 9-weeks 40%• 2nd 9-weeks 40%• Semester Exam 20%

• Every 3 weeks you get a progress report• UIL Eligibility starts the end of the 6th week, then the

9th week and every 9th week after that.• Robotics Club has the same UIL Eligibility standards.

Page 9: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey• SEMESTER GRADES:

• 1st 9-weeks 40%• 2nd 9-weeks 40%• Semester Exam 20%

• PLTW classes – you will ALL have to take the EOC• Some students will be eligible to skip the 2nd

Semester Finals, which will be different from the PLTW EOC’s, but EVERYONE takes the 1st semester Exam approx. 2 weeks after Christmas Break

Page 10: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

TURN IN ATTENDANCE

Page 11: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• SUPPLIES YOU BUY:• 1) Folder• 2) Writing Utensils (#2 Pencil & Black/Blue

Pen)– DE you may want colored pens

• 3) Loose Leaf Paper/Notebook

Page 12: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• TUTORING:• Available after school on most days. • For now I have duty until 3:40• This is the time you need to make up Tests

and/or Quizzes, or redo Tests and/or Quizzes.

• You can always redo a Test up to a 70%.• Late assignments will be 10 pts. off. every day

Page 13: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• ABSENCES:• Your responsibility to make up work/journal

updates/quizzes/tests.• Your responsibility to know material if we

have a test/quiz upon the day of your return.

Page 14: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• DISCIPLINE:

Page 15: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• Any ACTION that is:

• NOT SAFE• NOT RESPECTFUL• NOT ON SUBJECT• NOT AUTHORIZED

Page 16: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• Will have the following CONSEQENCES: • First Step - Verbal Warning

*Possibly Involving a 1-on-1 Conference and/or Parental/Guardian Notification• Second Step – D-Hall • **Third Step – Office Referral • **Refer to ‘Behaviors Requiring Automatic

Office Referral’ for severe conduct that skips to Third Step for 1st offense.

Page 17: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Behaviors Requiring Automatic Office Referral

Cheating

Skipping class (includes walking out of class)

Uncorrectable or consistent dress code violation

Fighting or confrontational behavior

Profanity/Racial Slurs in class

Refusing to surrender electronic devices

Vandalism or defacing school property

Non-compliance/defiance

Refusal to attend teacher D-hall

Public displays of affection

UNSAFE ACTS!!!!!

Page 18: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• CLASS DISCIPLINE:• Tardy (Next WED)(10 mins. or you’re ABS)• Everything needs to be done prior to the bell

(get EN, assignment, get in your groups, etc.)• Bell rings-in your seat, quiet, logging on to

computer or with all of your materials at your desk.

• Stay ALERT & QUIET throughout class.

Page 19: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• SMART PHONES/I-PADS:• PUT THEM AWAY• DO NOT CHARGE• This Includes Headphones/Earbuds• CHS Administration has/will continue to

make failure to comply with this policy clear.• Exceptions

Page 20: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• FOOD/DRINK: NONE EXCEPT• Water in a clear manufactures’ bottle• For now, Gum/Mints are OK• Individual Medical Doctor Excuse• OTHERWISE, put your groceries AWAY

Page 21: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• DISMISSAL:• We will work up until the bell, this is not Mr.

Reed’s Geometry class from last year.• Make sure you stay, if I told you earlier in

class.• If we have rearranged the furniture for group

work put it back before you leave.

Page 22: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Classroom Accountability/Survey

• MISCELLANEOUS:• Do NOT Touch my Desk or Things on it.• Do NOT Go into my Office without my

knowledge• Do NOT Touch the Thermostat – It is going to be Cold, plan accordingly.

• Do NOT take someone else’s homework, project, etc. erase their name and put yours.

Page 23: WELCOME to Mr. Reed’s (H104) Intro to Eng. Design (IED) – 1 st Digital Electronics (DE) – 2 nd Flex. Manufacturing – 3 rd Intro to Eng. Design (IED) -

Mr. Reed’s Website

Can be found under www.cisd.org