Welcome to Hungary, Welcome to Budapest

Welcome to Budapest University of Technology and Economics

Dear Student, Our university holds an international reputation for excellence in

engineering education. It attracts professors and students from all over the world. We are proud of our international professors and our international students.

Hungary is a member of the European Union. It is a good opportunity to highlight our cultural heritage, including scientists, artists, other creators, enriching Europe’s and the World’s progress and values. Our former and present professors or even graduates have also had strong contributions to those results.

Consequently, international students of BUTE can benefit from their studies in Hungary in a particularly precious way. Parallel to their professional studies in fields of engineering, business and management, cultural courses will increase the excitement of studying abroad.

Degree Programs in Engineering

in English

Degree programs in English

Faculty ofArchitectureCivil EngineeringChemical Technology and BiotechnologyElectrical Engineering and InformaticsMechanical EngineeringTransportation Engineering and Vehicle Engineering

APPLICATION / ENROLMENT INFORMATION FOR 2012/2013

Application and Admission

Application deadline: July 1st 2012 for the 1st semester to all programs,December 1st for the spring semester of preparatory courses.For MSc spring semester: 15th October 2012.For study abroad students:

30th June 2012 for fall semester;15th October 2012 for spring semester.

Application fee, processing, postage: EUR 100 (non-refundable)

Documents to submit:• Completed application form • copy of your passport• secondary school reports relevant to your application, with special

reference to mathematics, physics, and English language (notarized English translation)

• general certificate of your education - G.C.E. or any equivalent secondary school diploma (notarized English translation)

• one of the following documents of English language proficiency:a) TOEFL iBT test score of 90, or PBT score 550, b) Cambridge First Certificate "B", c) IELTS score of 5.0 (recommended for B.Sc.,required

for M.Sc. and Ph.D., and for B.Sc. and M.Sc. in Architecture programs)

• official transcripts, degrees/diplomas of any higher education already completed (notarized English translation)

• 4 recent photographs• curriculum vitae (autobiography/résumé)• two letters of recommendation (for M.Sc. and Ph.D. applications)• Study Plan (for Ph.D. applications only)

TUITION FEES for 2012/2013 academic year for non-EU citizens

Preparatory Course and General Course in Architecture EUR 3,200 / semester

Undergraduate Tuition Fees, leading to B.Sc. degree EUR 3,200 / semester

Undergraduate Tuition Fees, leading to B.Sc. degree in Civil Engineering

EUR 3,200 / semester

Graduate Tuition Fees, leading to M.Sc. degree for graduates of external higher education institutions


Graduate Tuition Fees, leading to M.Sc. degree for graduates of BME


Graduate Tuition Fees, leading to M.Sc. degree in Civil Engineering


Postgraduate Tuition Fees, leading to Ph.D. or DLA degree (depending on the character of the research and course programs)


Tuition Fees for special students (courses leading to no degree)

EUR 110/credits (min. 12 lessons/week)

Tuition Fees for special students (courses leading to no degree) in Civil Engineering

EUR 2,000 / semesterminimum

TUITION FEES for 2012/2013 academic year for EU citizens

Preparatory Course and General Course in Architecture EUR 3,200 / semester

Undergraduate Tuition Fees, leading to B.Sc. degree EUR 2,250 / semester

Undergraduate Tuition Fees, leading to B.Sc. degree in Civil Engineering


Graduate Tuition Fees, leading to M.Sc. degree for graduates of external higher education institutions


Graduate Tuition Fees, leading to M.Sc. degree for graduates of BME


Graduate Tuition Fees, leading to M.Sc. degree in Civil Engineering


Postgraduate Tuition Fees, leading to Ph.D. or DLA degree (depending on the character of the research and course programs)


Tuition Fees for special students (courses leading to no degree)

EUR 110/credits (min. 12 lessons/week)

Tuition Fees for special students (courses leading to no degree) in Civil Engineering

EUR 2,000 / semesterminimum

For Newly Enrolled Freshmen Only

PLACEMENT TESTS:

• 3rd – 5th September 2012 in Mathematics, Physics and English language for all students, and Freehand Drawing on September 1st for Architecture students.

• Students passing the tests will receive confirmation of their acceptance in the first year of the B.Sc. programs. Students found to have inadequate skills in Mathematics, Physics or English, will be directed to the one year Preparatory Course before the B.Sc. programs.

• NOTE: An intensive preparatory course is offered for all in Mathematics and Physics from 27th to 31st August.

• NOTE: Students who will not write the Placement Test for any reason (late arrival, etc.) after 3rd September 2012 may only join the Preparatory Course or the General Course of Architecture.

For more information Postal address:

Ms. Valéria BaloghBudapest University of Technology and Economics (BME)Central Study Office (CSO), Office of International Education (OIE)H-1111 Budapest, Műegyetem rkp. 7-9.Hungary

Phone: +36 1 463 3981 Fax: +36 1 463 2550

E-mail: [email protected]

mailto:[email protected]

Hungarian inventions

The Faculty of Architecture

Faculty of Architecture

The Faculty of Architecture at the Budapest University of Technology and Economics focuses on training highly professional experts in architectural engineering who are aware of the social and cultural implications of their profession.

Versatility is emphasised so that students will gain fundamental knowledge and skills in every possible field of architecture and be able to find a job in a highly competitive job market, and in any building- or design-related area of consulting, construction, and management.

The 5-year program in English leads directly to an M.Sc. degree in Architecture and Architectural Engineering (Dipl. Ing. Arch.), but it is also possible to graduate as a Bachelor of Science in Architecture.

http://portal.bme.hu/C13/Bulletin/Document%20Library/Architecture.aspx

Graduates of the Faculty of Architecture are qualified for a broad spectrum of architectural occupations:

– Design, construction and maintenance of residential, public, industrial and agricultural buildings;

– Reconstruction and the preservation of historical monuments;

– Urban design and settlement planning; and

– Administration of all these activities.

The curricula were established on the basis of Swiss and German models. The Faculty has maintained these traditions for the last 40 years but also provides additional European and international dimensions through its guest lecturers from abroad, thematic short courses, workshop seminars and exchange programs.

The five-year program of the Faculty of Architecture taught in English is in full conformity with the five-year program provided in Hungarian, whereafter two years of practical experience the EUR-ING title is acquirable.

Academic Program of the Faculty of Architecture: B.Sc./M.Sc. Studies

The two-level B.Sc, M.Sc training in the English speaking section of the Faculty of Architecture is realized in a split-up system, in full conformity with the Hungarian speaking section.

For a B.Sc degree, students have to accumulate min 240 credit points, for an M.Sc degree min 300 credit points by completing the obligatory subjects and gathering the remaining credit points by completing elective subjects as well.

The B.Sc degree can be obtained in a minimum of four years, M.Sc degree in a minimum of five years of study.

Master's Program

Students who have earned B.Sc. degrees in other schools of architecture can join the Master's Program. Programs will be tailored to their previous education and special needs. In general they are admitted to the last two years of the five years program, and they have to collect a minimum of 120 credits.

These studies encompass a wide range of complex design topics and elective subjects grouped in three directions:

• Structural Design - buildings and other structures.• Architectural Design - buildings with different functions, their interiors

and surroundings; the preservation of historical buildings.• Town Planning - urban design, settlement planning and management.

Departments

Construction Technology and ManagementArchitectural RepresentationHistory of Architecture and of MonumentsBuilding Energetics and Building Services Building ConstructionsIndustrial and Agricultural Building DesignPublic Building DesignResidential BuildingsDesignMechanics, Materials and StructuresUrban Studies

Description of General Courses in Architecture

• Basic Mathematics 1 • Computer Literacy 1 • Engineering Sciences • Geometrical Construction 1 • Freehand Drawing 1 • Design Skills 1 • Basic Mathematics 2 • Computer Literacy 2 • Geometrical Constructions 2 • Freehand Drawing 2 • Fundamental of Structures • Basic Tools of Building Constructions • Design Skills 2 • Fundamental of Architectural Design • Compulsory English for Pre-Eng. Students I. • Compulsory English for Pre-Eng. Students II.

Description of B.Sc/M.Sc Subjects 1st semester

• Mathematics EP1• Philosophy• Descriptive Geometry 1• Introduction to Building construction• History of Architechture I. (The beginnings)• Introduction to Structural Design• Drawing 1• Introduction to Architecture• Space Composition

Description of B.Sc/M.Sc Subjects 2nd semester

• Mathematics 2• Descriptive Geometry 2• Building Constructions 1• Statics• History of Architechture 2 (Antiquity)• Drawing 2• Basics of Architecture

Description of B.Sc/M.Sc Subjects 3rd semester

• Building Materials• Architectural informatics 1• Building Physics• Strength of Materials 1• History of Architecture 3 (Medieval)• Drawing 3.• Public Building Design 1• Residental Building Design 1.• Residential Building Design 2.• Building Constructions 2• Sociology for Architects

Description of B.Sc/M.Sc Subjects 4th semester

• Architecture of Workplaces 1• Architecture of Workplaces 2• Architectural informatics 2• Building Constructions 3• Strength of Materials 2• History of Architecture 4• Drawing 4• Design Methodology• Public Building Design 2


• Architectural informatics 3 CAAD for Architects

• Construction Management 1. Basics of Construction

• Building Service Engineering 1,2• Building Construction 4• Design of Load-Bearing Structures• History of Architeture 5 (19th century)• Drawing 5• Urban Design 1• Economics 1. (Microeconomics)


• Construction Management 2. Building Project Management

• Special load-bearing structures• Building Materials 2.• Building Constructions 5• Preservation of Historic Monuments• History of Achitecture 6• Drawing 6• Department's Design 1• Urban Design 2• Economics 1. (Macroeconomics)


• Construction Management 3 Planning of construction technology

• Building Constructions 6• History of Art• Drawing 7• Department's Design 2• Department's Design 3.• Building and architectural economics• Reinforced concrete structures I.


• History of Hungarian Achitecture History of Hungarian Architecture 1.

• Drawing 8• Complex Design 1• Construction management 4.

Controlling of Construction Technology• Soil Mechanics


• Drawing 9• Complex Design 2• Theory of Design• Building Constructions 7• History of Hungarian Architecture 2.

Contemporary Hungarian Architecture• Steel and Timber Structures• Construction Law• Special load-bearing structures• Building Materials 2.

The Faculty of Civil Engineering

Faculty of Civil Engineering

• The Faculty of Civil Engineering is the oldest Faculty of the Budapest University of Technology and Economics and can trace its history back to the University's predecessor, the Institutum Geometricum, founded by Emperor Joseph II in 1782. In the past years, thousands of engineers have graduated from this Faculty to work worldwide as educators, international researchers and engineering project managers.

The most essential service of the faculty – education linked closely to research and engineering work – is reflected in the scientific activities of nearly 140 engineers in 10 departments.

They have contributed significantly to the scientific solution of diverse engineering problems.

Out of the approximately 2300 students, who study at this Faculty, about 60 students from abroad participate in the English language program.

The engineering program in English leads to a B.Sc. degree in four years, in the Branch of Structural Engineering.

The branch offers specific educational objectives: Graduates from the Branch of Structural Engineering create engineering structures by utilizing and designing structural materials. They are expected to design, construct and organize the investments of mechanically, structurally and technologically complex structures in cooperation with architects and transport and hydraulics specialists.

Future structural engineers who graduate from this branch will be able to design and construct, among other things, flyovers and underground passageways for traffic networks; power stations, cooling towers, craneways, transmission line structures and TV towers; halls, storehouses, industrial plants, and multi-storey buildings as well as hydraulic engineering and water supply structures.

The engineering program in English leads to a M.Sc. degree in two years.

MSc:• Civil Engineering, Branch of Struct. Eng.• Civil Engineering, Branch of Infr. Env.Eng.• Land Surveying and Geoinformatics

Departments

Geodesy and Surveying Construction Materials and Engineering Geology Photogrammetry and Geoinformatics Geotechnics Structural Engineering Architectural Engineering Structural Mechanics Highway and Railway Engineering Hydraulic and Water Resources Engineering Sanitary and Environmental Engineering

Description of Civil Engineering General Courses (B.Sc. Subjects)

• Compulsory English for Civil Engineers 1,2.

• Communication Skills for Civil Engineers

• Mathematics A1 – Calculus• Mathematics A2 – Vector

Functions• Mathematics A3 for Civil

Engineers• Physics for Civil Engineers• Civil Engineering

Representation and Drawing

• Chemistry of Construction Materials

• Statics• Strength of Materials• Dynamics• Technical Informatics• Civil Engineering Informatics• Surveying I., II.• Introduction to Geoinformatics• Geology• Construction Materials I.

Description of Civil Engineering General Courses (B.Sc. Subjects)

• Soil Mechanics• Earthworks• Foundation Engineering• Basis of Design• Steel Structures I.• Reinforced Concrete Structures I.• Timber and Masonry Structures• Building Construction Study• Roads• Railway Tracks• Basics of Environmental

Engineering• Public Works

• Hydrology I.• Hydraulics I.• Hydraulic Engineering,

Water Management• Micro- and Macroeconomics• Management and Enterprise• Business Law• Urban and Regional

Development• Surveying Field Course• Theory of Administration,

Real-estate Registr.

Description of Structural Engineering Branch

• Construction Management - Estimates

• Construction Management - Contracting

• Rock Mechanics• Construction Materials II.• Structural Analysis• Finite Element Modelling• Steel Structures II.• Reinforced Concrete

Structures II.

• Bridge Construction• Constructional Technology• Underground Structures,

Deep Foundation• Building Construction I., II.• Residential Building Design• Laboratory Practice of

Testing of Structures and Materials

• Field Course of Structure Geodesy

Description of B.Sc. SubjectsMajor of Buildings

• Steel Buildings• Reinforced Concrete Buildings• Timber Structures• Strengthening of Structures• Composite Building Structures• Industrial and Agricultural Building Design• Elective• Reinforced Concrete Engineering Works

Faculty of Chemical Technology and Biotechnology

Studies in English at the Faculty of Chemical Engineering began in the 1985/86 academic year. Students in the BSc program receive a thorough introduction to areas basic to chemical engineering before they begin their specialisations in the fifth semester.

Courses of the following branches are available to students depending on the number of applicants (at least 3 applicants) both at the B.Sc. and M.Sc. levels:

• Analytical and Structural Chemistry• Chemical and Process Engineering• Industrial Pharmaceutics• Polymer Technology• Textile technology

Graduates of this Faculty will be versed in:

– The operations and personnel involved in chemical processes on an industrial scale,

– The development of the technology and products of industrial chemical processes,

– The design of industrial chemical processes, – How a chemical product or application is introduced

into the national economy, and – The elaboration of new chemical processes,

operations and technologies.

A three-year Ph.D. program is also available in all majors offered by the Faculty.

The Faculty of Chemical Technology and Biotechnology aims for its students to acquire a profound theoretical knowledge in mathematics, physics and physical chemistry.

It also aims to have its students experience, during their studies, all the types of tasks that chemical engineers encounter in their practical everyday work.

Students will acquire up-to-date laboratory skills, get acquainted with the machines and apparati used in the chemical industry, learn the principles needed for their optimal operation, and develop expertise in a more specific technology within the chemical, food and light industries.

Departments

Department of Inorganic and Analytical ChemistryDepartment of Physical Chemistry and Materials

Science Department of Organic Chemistry and TechnologyDepartment of Chemical and Environmental

Process EngineeringDepartment of Applied Biotechnology and Food

Science

Curriculum of B.Sc. SubjectsGeneral Subjects

• Compulsory English I., II.• English for Engineers • Communication Skills - English • Manager Communication -English • Intercultural Communication - English • Mathematics A1 - Calculus • General Chemistry • General Chemistry Calculations • General Chemistry Laboratory

Computing • Mechanical Operations in Chemical

Industry • Mechanical Operations in Chemical

Industry Pract. • Micro- and Macroeconomics

• Mathematics A2a - Vector Functions • Mathematics A3 for ch. eng. and

bioengineers • Physics I Mechanics • Inorganic Chemistry • Inorganic Chemistry Laboratory

Practice • Organic Chemistry I • Chemical Technology • Physics I Electrodynamics • Physics Laboratory • Organic Chemistry II • Analytical Chemistry I • Physical Chemistry I • Polymers

Curriculum of B.Sc. SubjectsGeneral Subjects

• Organic Synthesis Laboratory Practice

• Analytical Chemistry II • Physical Chemistry II • Medicines • Colloid Chemical Principles of

Nanotechn. • Environmental Chemistry and

Technology • Organic Chemical Technology • Organic Chemical Technology

Labo. Practice • Chemical Unit Operations I. • Business Law • Design of Experiments • Hydrocarbon Processing

• Biochemistry for Chemical Engineers

• Physical Chemistry Laboratory Practice

• Chemical Process Control • Chemical Unit Operations II • Management and Business

Economics • Industrial Safety • Quality Management • Chemical Unit Operations

Laboratory Pract. • Electives (humanities) • Project work • Thesis• Summer Practice • Elective

Curriculum of B.Sc. Branch Subjects

• Branch of Analytical and Structural Chemistry

• Analytical and Structure Determination Lab.

• Elemental Analysis • Chemical and Biosensors • Chromatography • Organic Structure Analysis • Structural Chemistry • Organic Chemistry III • Branch of Chemical and Process

Engineering• Hydrocarbon Technology and

Catalysis • Process Engineering • Environmental Benign Chemical

Process

• Computer Process Control• Chemical Production Control • Radiochemistry and Nuclear

Energetics • Branch of Industrial Pharmaceutics• Organic Structure Analysis • Organic Chemistry III • Organic Chemistry Laboratory

Practice II • Pharmaceutical technology • Unit Processes in Ind. Drug Synth.

Lab. Pract. • Unit Processes in Ind. Drug

Synthesis • Technology of Pharmaceutical

Materials • Unit Processes of Organic Chemistry

Curriculum of B.Sc. Branch Subjects• Branch of Material Science• Physical Chemistry of Surfaces • Experimental Methods in Materials

Science • Methods in Material Science Lab.

Pract. • Material Science Laboratory

Practice • Polymer Physics • Metals and Metal Matrix

Composites • Nonkonventional Materials • Modern Engineering Ceramics • Branch of Polymer Technology• Experimental Methods in Materials

Science • Machines and Tools for Polymer

Processing

• Polymer Processing • Polymer Physics Laboratory

Practice • Polymer Additives • Polymer Physics • Branch of Textile Technology• Experimental Methods in Material

Science • Fibre Forming Polymers • Chemistry of Dyes and

Surfactants • Colorimetry, Color Measurement • Chemical Technology of Textiles I • Chemical Technology of Textiles II • Textile Mechanical Technology

Curriculum of M.Sc. Subjects

• General Subjects• Differential Equations • Complex and Organometallic

Chemistry • Organic Chemistry • Analytical Chemistry • Materials science: • traditional structural materials and

polymers• Chemical process design and

control • Economic Analysis of

Technological Processes • Project Work I • Design of Experiments • Modern Physics for Chemical

Engineers

• Physical Chemistry and Structural Chemistry

• Technologies in Organic Chemical Industry

• Technology Management • Environmentally Benign and

Catalytic Proc. • Project Work II • Biology, Biotechnology • Computational Chemistry • Social and Visual Communication • Thesis I • Branch-depend. Eco. and Human

Know. Subj. • Elective Subject 6• Thesis II


• Branch of Analytical and Structural Chemistry

• Analytical Chemistry III • Sample preparation and sampling • Structure Elucidation of Organic

Compounds II.• Modern Separation Techniques • Bioanalysis and Study of

Metabolites • Branch of Chemical and Process

Engineering• Process Modelling and Process

Design • Energy prod. with conv. and novel

methods • Modern Separation Technologies • Industrial Organic Chemistry • Petrochemistry

• Branch of Industrial Pharmaceutics

• Pesticides • Pharmaceutical Technology • Formulation of Biologically Active

Materials • Industrial Organic Chemistry • Medicinal Chemistry • Branch of Polymer Technology• Application of Plastics • Machines and Technologies in

Polymer Proc. • Polymer Physics • Polyreactions • Composites


• Branch of Textile Technology• Polyreactions • Composites • New Application and Technologies of Fibres • Basic Processes in Textile Chemical Technology• Polymer Physics • Branch-depending Economic and Human Knowledge Subject• Intellectual Property (IP) Management • Patents in Pharmaceutical Industry • Control and Manag. Meth.in the Chem. Industry• Quality assurance of drug production • Quality Control (Quality Assurance)

Faculty of Electrical Engineering and Informatics

Faculty of Electrical Engineering and Informatics

The Faculty of Electrical Engineering founded in 1949 has been renowned for excellence in research and education throughout the years of changes in the scope of engineering. Over this period, the faculty has earned a wide-spread international reputation for its high academic standards and scientific achievements. Spearheading the movement to establish a modern education system, it has offered a comprehensive English curriculum since 1992.

Nearly at the same time, the name of the faculty was changed to Faculty of Electrical Engineering and Informatics in order to give recognition to the growing importance of computer science. The education programs in English include a 3.5-year B.Sc., a 2-year M.Sc. and a 3-year Ph.D. program in the fields of electrical and software engineering.

This Bulletin describes the curricula and the subjects being available for the 2012/2013 academic year, regarding the BSc, MSc and PhD programmes, respectively.

The undergraduate B.Sc. programme aims at providing a comprehensive knowledge with sound theoretical foundations in two areas:

1. Electrical Engineering including more specific studies in electronics, computer engineering and power engineering;

2. Software Engineering dedicated to the major domains of computer science.

The major specializations in Electrical Engineering are computer networks, control and robotics and power engineering. Studies in Software Engineering include specialization in infocommunication and software technology.

Each specialization contains three courses focusing on the field of interest followed by a laboratory course and a project laboratory. In order to pursue studies in a given specialization the number of students must exceed a certain threshold, otherwise the interested students are kindly directed to another specialization.

The M.Sc. programme further advances the knowledge obtained in the undergraduate programs in three fields:

• (1) Electrical Engineering, offering specializations in– embedded systems, – infocommunication systems, – electrical machines and drives;

• (2) Software Engineering, offering specializations in – applied computer science, – system development;

• (3) Business Information Systems, offering specializations in– Analytical Business Intelligence.

Practical guidelines for acceptance to the MSc programme

• 1. Applicants with B.Sc. Studies having a WGAP (Weighted Grade Average Point) equal or better than ‘good’ (more than 3.51 out of 5.00) will receive acceptance to the M.Sc. Course.

• 2. Applicants with a B.Sc. qualification less than ‘good’ (less than 3.50 out of 5.00) are regretfully rejected to enter the M.Sc. Program.

• 3. Applicants should also submit two recommendations given by renowned academic personnel.

Practical guidelines for acceptance to the PhD programme

• 1. The primary condition of admission to postgraduate studies is that the applicant must hold a master of science (or engineering) degree in electrical and electronic engineering (or in some closely related fields) or informatics. Admission to postgraduate studies will be considered if the qualification of previous studies is at least of level ‘good’ (more than 3.51 out of 5.00) or equivalent.

• 2. Applicants are expected to have a definite scope of research in electrical engineering in Computer Science,where they would like to advance their knowledge. They are requested to present a proposal, specifying a domain of interest with some research objectives, milestones and deliverables during the postgraduate studies. The suggested topic should have sufficient preliminaries in their university studies.

• 3. Applicants with experience and initial result in the suggested research topic will have preference. A short summary of preliminary research activities together with relevant reports, published papers … etc. Would be of help in the admission process.

• 4. Applicants should also submit two recommendations given by renowned academic personnel.

DepartmentsAutomation and Applied InformaticsElectronics TechnologyElectron DevicesTelecommunicationsControl Engineering and Information TechnologyMeasurement and Information SystemsComputer Science and Information TheoryBroadband Infocommunications and Electromagnetic TheoryTelecommunications and Media InformaticsElectric Power Engineering

Description of B.Sc. Subjects in Electrical EngineeringElements of Natural Science

• Foundation of Computer Science• Informatics 1• Informatics 2• Materials Sciences• Mathematics A1a - Calculus• Mathematics A2a - Vector Functions• Mathematics A3 for Electrical Engineers• Mathematics A4 - Probalility Theory• Physics 1• Static Electric and Magnetic Fields• Physics 2• Basics of atomic physics

Description of B.Sc. Subjects in Electrical EngineeringFoundational Technical Studies

• Basics of Programming 1• Basics of Programming 2• Control Engineering• Digital Design 1• Digital Design 2• Electromagnetic Fields


• Electronics 1,2• Electronics Technology• Electrotechnics• Infocommunication• Measurement Technology• Microelectronics• Power System Engineering• Signals and Systems 1,2


Laboratory 1

The topics of the measurements:1. measurement: Getting to know the instruments2. measurement: Basic measurements3. measurement: Basic digital tools4. measurement: Signal analysis I.5. measurement: Signal analysis II.6. measurement: Investigation of two poles7. measurement: Investigation of four poles8. measurement: Investigation of active electronic devices9. measurement: Investigation of logic circuits10. measurement: Investigation of synchronous devices11. measurement: Measurement of programmable

peripheries


Laboratory 2

The topics of the measurements:1. measurement: Building and testing simple electrical

circuits2. measurement: Designing printed circuit boards3. measurement: Measurement of EMC phenomena4. measurement: Measurement of electrical power5. measurement: Investigation of transistor amplifiers6. measurement: Investigation of instrumentation amplifiers7. measurement: Investigation of ADC and DAC8. measurement: System identification and control9. measurement: Investigation of analog phase locked loop10. measurement: Investigation of a 900 MHz FSK

transceiver/receiver11. measurement: Logic controllers

Description of B.Sc. Subjects in Electrical EngineeringSpecialization Studies

Power Engineering Study Specialization Block

• Electric energy transmission• Electric machines and applications• Electric switching devices• Embedded and Controller Systems• Embedded and ambient systems

Description of B.Sc. Subjects in Electrical EngineeringSpecialization Studies

• Microcontroller based systems• Programmable control and sensor systems• Infocommunication Systems• Media communication• Network technologies and applications• High frequency system techniques

Description of B.Sc. Subjects in Software EngineeringElements of Natural Science

• Calculus 1 for Informaticians• Calculus 2 for Informaticians• Coding Technology• Introduction to the Theory of Computing 1• Introduction to the Theory of Computing 2• Physics 1i• Static Electric and Magnetic Fields• Physics 2i• Electrodynamics• Basics of atomic physics• Probability Theory• Theory of Algorithms

Description of B.Sc. Subjects in Software EngineeringFoundational Technical Studies

• Artificial Intelligence• Basics of Programming 1,2• Computer Architectures• Computer Graphics and Image Processing• Computer Networks• Control Engineering• Databases• Digital Design 1,2• Electronics• Management of Information Systems• Measurement Laboratory 1,2,3,4• Operating Systems• Signals and Systems• Software Laboratory 1,2,3,4,5• Software Techniques• Software Technology• System Modeling• Telecommunication Networks and Services

Description of B.Sc. Subjects in Software EngineeringSpecialization Studies

• Information Technology• Development of data driven applications• Object oriented software design• Intelligent system supervision• Infocommunication Networks• Protocol technologies• Mobile infocommunication systems• IP network management

Description of M.Sc. Subjects in Software EngineeringApplied Computer Science Specialization

• System Optimization• Advanced Mathemathics for

Software Engineers • Formal Methods• Data Security• Languages and Automata• Software Architectures• Engineering Management• Distributed Systems• Mobil Software Development• Model-Driven Paradigms• Service-Oriented Systems• Integrated Information Systems

• Laboratory for Distributed Systems and Mobile Software Development

• Laboratory for Service-Oriented Systems and Model-Driven Paradigms

• Quality Management• Argumentation, Negotiation,

Persuasion• Investments• Management Accounting• Project Laboratory I-II• Thesis Project I-II

Description of M.Sc. Subjects in Software Engineering System Development Specialization

• System Optimization• Advanced Mathemathics for

Software Engineers • Formal Methods• Data Security• Languages and Automata• Software Architectures• Engineering Management• Object-Oriented Development• Parallel and Grid Systems• Software Testing• Metamodels in Software Design• Software Quality• Laboratory for Grid and Object

Oriented Development

• Laboratory for Software Testing and Quality

• IT Security and Management• SOA-Based Integration• Linux-Based System

Development• Quality Management• Argumentation, Negotiation,

Persuasion• Investments• Managemment Accounting• Project Laboratory I-II• Thesis Project I-II

Description of M.Sc. Subjects in Electrical EngineeringEmbedded Systems Specialization

• Physics 3• Measurement Theory• Software Design• Advanced Mathemathics for

Electrical Engineers • Nanoscience• Engineering Management• System Architectures• Software Technology for

Embedded Systems• Real-Time and Safety-Critical

Systems• Information Processing• Embedded System Design• Laboratory for System

Architectures

• Laboratory for Information Processing

• Interfacing Embedded Systems to Information Systems

• High-Performance Microcontrollers

• Digital Filters• Quality Management• Argumentation, Negotiation,


Description of M.Sc. Subjects in Electrical EngineeringInfocommunication Systems Specialization

• Physics 3• Communication Theory• Software Design• Advanced Mathemathics for

Electrical Engineers• Photonic Devices• Information and Network Security• Engineering Management• Wireline and Wireless Transmission

Technologies• Convergent Networks and Services• Network and Service Management• Human-Computer Interaction• Network Planning• Information and Network Security

• Laboratory for Infocommunications I

• Laboratory for Infocommunications II

• Optical Networks• Performance Analysis of

Infocommunication Systems• Quality Management• Argumentation, Negotiation,


Description of M.Sc. Subjects in Electrical Engineering Electrical Machines and Drives Specialization

• Physics 3• Alternating Current Systems• Measurement Systems• Advanced Mathemathics for

Electrical Engineers • Electrical Insulation and

Discharges• Engineering Management• Theory and Design of Electric

Machines• Electrical Equipment and

Insulation• Control of Electrical Drives• Electrical Systems of

Renewable Energies

• Electric Vehicles• Laboratory for Electrical

Machines and Drives I-II• Servo and Robot Drives• Modelling and Simulation• Microcomputer Controlled

Drives• Quality Management• Argumentation, Negotiation,


Description of Curriculum of M.Sc. Subjectsin Business Information Systems

Analytical Business Intelligence Specialization

• Mathematical Statistics• Operation Research• Accounting• Controlling• E-Law• Project Management• Finance• Data Security• Network and Database

Technologies• Data Mining Techniques

• Business and Financial Analytics• Customer Analytics• Trend Analysis and Visualization• Media and Text Mining• Risk Analysis and Management• Processing of Personal and Public

Data• Engineering Management• Project Laboratory I-II• Thesis Project I-II

Faculty of Mechanical Engineering

Departments Department of Science of Materials and Engineering

Department of Fluid MechanicsDepartment of Energy EngineeringDepartment of Building Service Engineering and Process EngineeringDepartment of Machine and Industrial Product DesignDepartment of Manufacturing Science and EngineeringDepartment of Hydrodynamic SystemsDepartment of Mechatronics, Optics and Information EngineeringDepartment of Applied MechanicsDepartment of Polymer Engineering

• The Mechanical Engineering Program at the Budapest University of Technology and Economics began in 1863, and the Faculty of Mechanical Engineering was established soon afterward, beginning official operations in the 1871/72 academic year. The Faculty is justly proud of its continuous and progressive 150-year history and now offers undergraduate and graduate programs in both Hungarian and English.

• Since the 2006/07 academic year, the Faculty of Mechanical Engineering has offered a 3.5-year undergraduate B.Sc. degree program in English. The new two-year graduate program in English, leading to an M.Sc. degree started in February 2009, students can start their studies either in the fall or spring semester. Individual postgraduate academic and research programs, which are usually completed in two to three years, are available for those who already have an M.Sc. degree and wish to pursue a Ph.D. degree.

The undergraduate B.Sc. program of the Faculty of Mechanical Engineering is designed to continue a tradition of excellence by:

• providing a well-established and broad knowledge that graduates of this Faculty can apply immediately in their work and also use as the basis for further studies;

• graduating competent engineers who are not only masters of their profession, but also possess an ethical philosophy of engineering based on accuracy, punctuality and reliability as well as a respect for the human element.

The goals of the Faculty's graduate M.Sc. and Ph.D. programs are:

• to train creative, inventive mechanical engineers who can apply the engineering skills and the knowledge they have gained from the natural sciences on a state-of-the-art level; and

• to foster the development of leaders in engineering research and development.

MSc in Mechanical Engineering Modeling at the Budapest University of Technology and Economics (BME)

This course deals with those time-dependent problems of mechanical engineering, which typically require the efficient modelling of these tasks in order to access the continuously developing methods of computational engineering.

Modelling means the understanding and active application of the related theories, which are supported by differential equations and numerical methods in mathematics.

Modelling needs also experimental work during the research-development-innovation process in case engineers do not have enough information about the motions and processes they want to capture by a model.

MSc in Mechanical Engineering Modeling

After the brief summary of the required mathematics, solid mechanics, fluid mechanics, thermodynamics, electronics, control and informatics, the students have to choose a major and a minor specialization from the following list of modules:

1. Solid Mechanics 2. Fluid Mechanics 3. Thermal Engineering 4. Design and Technology 5. Industrial Electronics (minor only)

6. Robotics

Curriculum of B.Sc. Subjects1st semester

• Compulsory English • Descriptive Geometry • Introduction to Mechanical Engineering • Information Systems • Macro- and Microeconomics • Mathematics A1a• Technical Chemistry • Statics

Curriculum of B.Sc. Subjects2nd semester

• Compulsory English II• Materials Science and Testing • Fundamentals of CAD • Physics A2 • Fundamentals of Machine Design • Mathematics A2a • Software Engineering • Strength of Materials

Curriculum of B.Sc. Subjects3rd semester

• Dynamics • Materials Engineering • Physics A3 • Machine Elements 1. • Environmental Management Systems • Mathematics A3 for Mechanical Engineers • Mathematics Global Exam • Analysis of Technical and Economical Data • Measurement Technology

Curriculum of B.Sc. Subjects4th semester

• Basics of Electrical Engineering • Machine Elements 2. • Manufacturing • Fluid Mechanics • Engineering Thermodynamics • Polymer Materials Science and Engineering • Vibrations • Mechanics Global Exam


• Electromechanics • Control Engineering • Heat Transfer • Diffusion Processes • Measurement at Energy and Env. Protection • Measurement Technique of Processes • Fundamentals of FEM • Management and Business Economics • Business Law • Optional subject: 2• Marketing • Communication Skills - English


• Technical Acoustics and Noise Control • Fluid Machinery • Heat Engines • Numerical Simulation of Fluid Flows • Processes and Equipments of Chemical • Air Pollution, Wastewater and Solid Waste Man. • Independent Study 1 • Optional subject:

– Heating – Manager Communication – Crosscultural Communication

The Faculty of Mechanical Engineering offers additional and optional courses on BSc level to its students to take

• Optional subjects• Modelling of Processes and Equipment • Laboratory • Independent Studies • Heating • Manager Communication • Crosscultural Communication • English for Engineers • Analytical Mechanics • Advanced Fluid Mechanics • Advanced Thermodynamics


• Fluid Flow Systems • Energy Processes and Equipments • Volumetric Pumps and Compressors • Measurement for Chemical and Env. Proc. • Final Project • Optional subject:

• Air-conditioning

Faculty of Transportation Engineering and Vehicle Engineering

DepartmentsDepartment of Building Machines, Materials Handling Machines and Manufacturing LogisticDepartment of Automobile EngineeringDepartment of Vehicle Parts and DrivesDepartment of Vehicles Manufacturing and RepairingDepartment of Chassis and Lightweight StructuresDepartment of Control and Transport AutomationDepartment of Transport EconomicsDepartment of Transport TechnologyDepartment of Aircraft and ShipsDepartment of Railway Vehicles

• The Faculty of Transportation Engineering has been training engineers for the field of transportation and vehicle engineering since 1951. Since that time the profile of engineering training has been widened several times.

• In the academic year of 2006/2007 as a first step of the new type of linear training, at the Faculty of Transportation Engineering, training began at the transportation engineering basic specialty (BSc); in that framework knowledge related to transport, transportation, and mechanization can be attained including knowledge in connection with processes realized in the listed fields and also knowledge related to machines, equipment (vehicles and mobile machinery) realizing those processes.

• From the academic year 2010/2011 our Faculty launched vehicle basic specialty (BSc), its task is to acquiant students with the design, operation, and control systems of vehicles.

• In the academic year 2008/2009, the Faculty began, as the second stage of the new type of linear training (BSc), the master’s program of three Faculties (MSc): specialties in transportation engineering, logistics engineering and vehicle engineering.

• With adequate BSc qualification, a certified engineering qualification

can be obtained in 2 years at these master’s training specialties. All the fundamental and complementary studies pursued at the Faculty are carried out in accordance with the rules of the ECTS (European Credit Transfer System).

• The quantity of student work necessary for acquiring the knowledge material of an arbitrary subject is measured through credit-points. One credit-point means in average 30 hours of work for a student, one semester contains a study material with the quantity of 30 credit-points. Minimum condition of course initiation: 5 (or more) paid student status.

BSc in Transportation EngineeringLength of studies: 7 semesters

Program objectives: The education of transportation engineers, who are able to design, arrange, operate and control transportation and transport-logistics processes, to fulfil the related official and management tasks, as well as the works related to the selection, operation and maintenance of equipments realising processes, including the elements of infrastructure, informatics and control systems, as well. Possessing the obtained knowledge, the BSc graduate transportation engineers will be able to continue their studies in the second cycle of engineering education (leading to an MSc degree).

• Specialisations: Specialisation in transportation processes, Specialisation in logistics

BSc in Vehicle EngineeringLength of study: 7 semesters

Program objectives: The education of vehicle engineers, who are able to keep in operation road vehicles, railway vehicles, aircraft and ships, as well as building machines and materials-handling machines in a system oriented way, taking into consideration the characteristics of the transportation and transport-logistic processes, furthermore to solve the basic tasks of engineering, concerning their design, development, manufacturing and repair. They can perform special missions with emphasized regard to transport safety, environment protection and energy planning. Possessing the obtained knowledge, the BSc graduate vehicle and mobile-machinery engineers will be able to continue their studies in the second cycle of engineering education (leading to an MSc degree).

Specialisations: Specialisation in railway vehicles, Specialisation in road vehicles,Specialisation in aircraft, Specialisation in ships,Specialisation in buildings machines, Specialisation in automated materials-handling equipments and robotics,Specialisation in vehicle manufacturing, Specialisation in vehicle mechatronics, Specialisation in vehicle superstructures.

MSc in Vehicle EngineeringLength of study: 4 semesters

The MSc level trains vehicle engineers, who are prepared to develop, to design, manufacture, research of operation processes, as well as to keep in operation, to maintain and railway vehicles, road vehicles, agricultural vehicles, ships, aircraft, building machines and materials-handling machines taking into consideration the requirements of safety, environmental-protection and energy management.

Master’s Program in Vehicle Engineering

• Engineering mathematics• Control theory• Electronics - electronic

measurement systems• System technique and analysis• Mechanics J• Advanced materials and

technologies• Decision making methods• Robots and applications• Integrated quality management

systems• Computer aided conception,

dimensioning and manufacturing• Vehicle operation, reliability and

diagnostics

• Materials flow and technical logistics

• Mechatronics, robotics and microcomputers

• Vehicle body structures• Vehicle engines and transmission

systems• Design and testing of railway

vehicle systems• Railway vehicle system dynamics• Operation of railway vehicles• Diesel and electric traction• Engine design• Transmission system design and

vehicle• mechanics

Master’s Program in Vehicle Engineering

• Suspension design and vehicle dynamics• Vehicle construction and design, road safety• Design and testing of ships• Theory and propulsion of ships III.• Manufacturing and operation of ships• Construction of ships• Design and testing of aircrafts• Flight theory• Theory of aircraft engines• Dynamics of logistical machines• Mobile hydrostatic system• Design of concrete technology's machinery• Construction processes• Theory of material handling machine design• Network control systems of material handling• Mechatronics• Automated materials handling systems• Measuring system in the vehicle

manufacturing

• Vehicle manufacturing systems• Surface engineering• Typical vehicle-production technologies• Measurement techniques and signal

processing in vehicles• Vehicle system dynamics and control• Vehicle system informatics• Vehicle simulation and optimisation• Road safety, accident reconstruction• Vehicle evaluation, traffic environment,

human factors• Dynamics of vehicle• Motor vehicle measurements• Design of alternative vehicle drive systems• Control of hybrid vehicle systems• Dynamics of electro-hybrid vehicles• Design of mechatronic components for

alternative drive systems

MSc in Transportation EngineeringLength of study: 4 semesters

The MSc level trains transportation engineers, who are prepared to analyse, to design, to organise and to control of transportation processes and systems taking into consideration the principles of economics and system orientation.

They are prepared to carry out management and professional tasks, as well as to select and keep vehicles and equipments in operation as elements of transportation systems, including the elements of infrastructure and informatics systems, as well.

Master’s Program in Transportation Engineering

• Engineering mathematics• Control theory• Electronics - electronic measurement

systems• I+C technologies• Mechanics K• Advanced materials and technologies• Decision making methods• Project management• Transport Economics• Transport automation• Transport informatics• Traffic flow• Intelligent Transport systems• Transport operation• Logistics

• Passenger transport• Transport modelling• Environmental effects of transport• Signal processing in transport• Information connection of the vehicle

and the track• Modelling and control of vehicles and

traffic systems• Engineering of transport automation

systems• Controlling systems in transportation• Financing techniques in transportation• Management of transport and logistic

services• Human Resource Management in

Transportation

MSc in Engineering LogisticsLength of study: 4 semesters

The MSc level trains engineers of logistics, who are prepared to analyse, to design, to organise and to control of logistic processes and systems with regard to the management of material-flows and connected information-flows realising among the companies concerned.

They are prepared to design, to develop and to take part in manufacturing and quality control, as well as to control the operation of logistic machinery, tools and equipments of elements of logistic systems.

Master’s Porgram in Logistics Engineering

• Engineering mathematics• Control theory• Electronics - electronic measurement

systems• I+C technologies• System technique - system modelling• Advanced materials and technologies• Decision making methods• Project management• Informatics in logistics• Planning of material handling and

warehouse systems I.• Planning of material handling and

warehouse systems II.• Logistics machine, equipment, robotics• Control and automation of logistic

systems• Database systems in logistics

• Planning of logistic processes• Enterprise logistics• Production logistics - production

planning• Operation of Logistics Systems• Data communication systems• Materials handling in flexible

manufacturing• Machine intelligence• Engineering mathematics• Control theory• Electronics - electronic measurement

systems• System technique and analysis• Mechanics J• Decision making methods• Robots and applications

More information

www.kth.bme.hu - in EnglishEngineering Education in English

Academic Programs - Bulletin Bulletin 2012/2013 - On-line version

Application, Admission Application/Enrolment Information

for 2012/2013

Click here for a printable Application Form! (PDF)

http://www.kth.bme.hu/

http://icepe.bme.hu/

http://icepe.bme.hu/bulletin/

http://portal.bme.hu/C13/Bulletin/default.aspx

http://icepe.bme.hu/admission/

http://icepe.bme.hu/admission/application_form_2011.pdf

See you soon!

Welcome to Hungary, Welcome to Budapest

Documents

Transcript of Welcome to Hungary, Welcome to Budapest