Welcome to EUROLUM GmbH Product Information Eurolum GmbH | Kirschallee. 90 | 14469 Potsdam | Tel....


Applications Area

Replacement of existing T8 fluorescent tubes to a most modern and energy-efficient alternatives is possible without changing the lamp fittings.

This can be achieved with your existing lighting system, meaning - Savings of between 40 % and 60 %- a considerably longer service life - a better light quality


Savings capacity of energy for interior lightings


Our Products

1 - EUROTHERM Energy-saving tube2 - EUROTHERM-E3 - Reflectors


EUROTHERM Energy-saving tube

Advantages of the EUROTHERM Energy-saving tube

Energy savings of 40% - 60% (depending on local energy costs).

By using our highly efficient reflectors, an improvement in the illumination is the rule

Reduction of maintenance costs.

Constant, flicker-free light without stroboscopic effect.

Safe shutdown of the power in case of lamp defect and at the end of the lamp life

High switching capability through optimized ignition.

Improved temperature behavior by protective tube, also available as a shatterproof protection requirements.


EUROTHERM-EIn our EUROTHERM-E you can achieve savings of up to 40% in T8 lamps which already equipped with an electronic control gear (ECG), and in lamps with conventional/low-loss ballast you can save up to 60 %. After conversion, the lamp meets the same quality requirements as a new standard T5.

Also, with these conversion kits more power as well as dimmable and fully digital implementations are available.


Reflectors for T5 fluorescent tubes

Serie CompactSerie Compact Serie FloodSerie Flood Serie SpotSerie Spot

Compact high gloss28/35 Watt

Serie DownSerie Down

Flood high gloss 28/35Watt

Spot high gloss 28/35Watt

Down high gloss 28/35Watt

With the optional available reflectors, the light value can be not only obtained but also increased significantly depending on the situation. This means up to a 60 % reduction in energy costs at the same or significantly higher light levels.


Other advantages of conversions by the Systems we offer:

Lolower power consumption.

Lolower load of air conditioning due to less heat development. Lower maintenance costs because of fewer lamp changes and no starter replacement

Optimum lamp warm start(< 2 Sec.), even in applications with more than 10 starts per day. Decrease in environment pollution through CO2, SOx and NOx, usually released in the process of generation of energy.


Use and application areas

1. Public buildings such as kindergartens, hospitals, employment offices, schools,outdoor and street lighting, road maintenance, city halls, etc.

2. Garages / parking lots/ Car Dealers

3. Ceiling lights

4. Department stores, supermarkets, hotels

5. Industrial companies

6. Manufacturing companies

7. Halls for shipping and storage

References


http://www.tnt.de/

http://www.emilfrey.ch/

http://www.lsv.de/kiel/03Service/04_links/index.html

http://www.kaufring.de/generated/main_wir.html

http://www.topnews.in/files/Nestle-logo_0.jpg

Best Practice Example 1: Replace T8 Fluorescent lamps by EUROLUM energy-saving technology

Initial situation

• Supermarket with outdated lighting technology (T8, CCG)

• Conversion of the market within one day (Sunday)

• No deterioration in light output > (300 lux)

Implementation

• Modernization of technology as part of an efficient lighting upgrades by EUROLUM

• Use of EUROLUM energy conversion

• Conversion of 251 fluorescent tubes

• Check and documentation of the light output before and after conversion

Economy

• Total investment : 8.500 €

• Savings in electricity consumption : 45.225 kWh (53 %)

• Savings in electricity costs : 8.541 €/a

• Savings in CO2 emissions : 30.890 kg/a


Best Practice Example 1: Replace T8 fluorescent lamps by EUROLUM energy-saving technology

Customer: Food market

Berlin

Cost saving in light 8.541,12€ (53,6%)Reduction in the CO2 emission 30,89t


Best Practice Example 1: Replacement of T8 fluorescent lamps with T5 by Eurotherm

Electricity load profile before and after conversion of the lighting

Proposal : Reduction of connected load by 8,23 kW; 41.164 kWh/a

approximately 9 kW connection capacity (approx. 13% of Tte total power)

Lighting during the conversion

Week power consumptionbefore conversion : 8.420 kWhafter conversion : 7.565 kWhDifference: 855 kWh

Savings per year : approx. 45.000 kWh ≙ 8.541,00 €


Thuesday, 16.8. from 6 o‘clock till 8:37

Before conversion After conversion

Tuesday, 23.8 from 6 o‘clock till 8:37Tuesday 30.8. from 6 o‘clock till 8:37

Monday 29.8. from 6 o‘clock till 8:37

Best Practice Example 1:Replace T8 fluorescent lamps with Eurolum energy-saving tube

Before conversion After conversion



Climate protection

Users of T8 fluorescent lamps achieve energy savings of about 50% by switching to T5 lamps and compound those savings with a significant reduction in pollution by CO², nitrogen oxides and sulfur oxides, which released during energy production.


What have you done in recent years to improve the energy efficiency of your lighting and CO² emissions?

Thank you for your attentionEUROLUM

Welcome to EUROLUM GmbH Product Information Eurolum GmbH | Kirschallee. 90 | 14469 Potsdam | Tel....

Documents

Transcript of Welcome to EUROLUM GmbH Product Information Eurolum GmbH | Kirschallee. 90 | 14469 Potsdam | Tel....