Welcome to #CanSantaFe2018! - The Food Depot · 2020. 12. 7. · Dairy: Dried or Evaporated Milk,...

Canstruction Santa Fe aiasantafe.org/Canstruction thefooddepot.org shopsantafeplace.comNORTHERN NEW MEXICO’S FOOD BANK

Welcome to #CanSantaFe2018!

ROCK

CAN ROLL

Presented by

Build Day June 8, 2018

We’re always available to answer questions.

Canstruction Santa Fe Chair: The Food Depot Contact:

Ashley Hartshorn Jill Dixon, The Food Depot

505.820.1555 505.471.1633 ext. 16

[email protected] [email protected]

Canstruction Santa Fe 2018 | Kick-Off Information Packet

S A N TA F E

A. Dates to Know + Key Information1. Design Team Sign-Up Deadline | Wednesday, February 28

• All design teams must register by deadline above. www.aiasantafe.org/canstruction

2. Design Concept Deadline | Friday, March 23

• See subsequent sections for detailed Build Out Rules + Regulations and Design Criteria.

• All sculpture designs must be submitted by deadline above AT THE LATEST for review and approval. You are welcome to send these anytime sooner, as designs are first come, first served and we try to avoid duplicates. Keep in mind that this is a family-friendly event and is intended to be fun and creative. We strongly discourage sculptures of logos.

• Design Teams and Sculpture Sponsors are to collaborate to come up with their ultimate design idea. Design Teams and their Sculpture Sponsors can meet as much or as little as they think is necessary during the design process, but it is ultimately up to the Design Team to work out the details. The Design Team is acting as just that, the Designer, while the Sculpture Sponsors act as a client.

3. CanSculpture Sponsor + Can Order Deadline | Friday, April 6

• Due date to ensure time for order and delivery of food.

• Design Teams will either be provided with Can Order Forms. Ideally you would have your list nearly complete when your design is due. All sponsor money must be in place for cans to be ordered - your can order amount CANNOT exceed your sculpture sponsor amount.

4. CanSculpture Boards Due | Friday, May 18

• Design team boards to be put together by teams, and Canstruction Santa Fe will take care of printing. Please include any pertinent information for your CanSculpture, and we will provide you with any required logos and/or text.

5. Canstruction Build Day | Friday, June 8

• The big day - we hope you’re ready!

• All food orders will be weighed and delivered to the mall prior to Build Day and separated by team.

• Snacks and lunch will be provided for builders.

• Don’t forget to bring all of your previously prepared structural materials, any other materials required and/or equipment such as ladders. See Build Out Rules + Regulations for more information.

• You will have ten (10) hours to build your sculpture, and may include build volunteers from both your Design Team and Sculpture Sponsor.

6. Awards Party | Thursday, June 14

• Judging is to remain anonymous and fair. No team members are allowed to be promoting their sculpture prior to or during judging (but of course you can encourage people to view the exhibition and participate in People’s Choice).

• The Awards Party will be held at Santa Fe Place Mall, so we can celebrate together with our Cansculptures. Appetizers and drinks will be provided.

7. deCanstruction Day | Monday, June 18

• The Food Depot and their volunteers will decanstruct the cansculptures and take all canned goods from the site. The cansculptures must be easy to decanstruct. If a generous amount of support materials were used your team is responsible for retrieving and/or disposing of those materials; support materials may not be stored at Santa Fe Place.

3


S A N TA F E

4

B. Build Out Rules + Regulations1. Size of Structure - Maximum size for a structure

is 10’ L x 10’ W x 8’ H.

2. Size of Build Team - Maximum size of each team is five (5) builders at a time within the 10’ x 10’ area. You may have more builders working outside of the 10’ x 10’ work area, and can also work in shifts within the 10’ x 10’ area.

3. Build Time - Structures must be built between 8am and 6pm. This gives you ten (10) hours of build time.

4. Props - Props, boxes, and bagged food are discouraged. Try to use as many canned goods as possible, however minor features may use other items accepted by The Food Depot. Try to solve all design problems with food items.

5. Types of Cans - No glass containers, alcoholic beverages or soda, junk food, or pet food (any exceptions must be approved by the committee). All cans must be unopened, with labels intact, and must not be expired. Nutritional canned food of all sizes may be used. Here is a list of Critically Needed Items from www.thefooddepot.org for your consideration:

Vegetables and Fruits: Canned Vegetables, Canned Fruits, Canned Fruit Juices, Canned Soups, Tomato Sauces and Pastes, Spaghetti Sauce, Yams & Pumpkin (favorite holiday choices!), Baby Foods - Vegetables & Fruits, Instant Mashed Potatoes, Tomato Juice, Raisins & Other Dried Fruits, Applesauce.

Grains: Infant Cereal, Pancake Mix, Muffin Mix, Quick Bread Mix, Grits, Oatmeal, Cream of Wheat, Bran Cereals, Shredded Wheat Cereal (Ready to Eat), White Flour, Cornmeal, Biscuit Mix, Graham Crackers, Pretzels, Dried Rice, Dried Pasta, Macaroni & Cheese (Boxed), Canned Pasta, Canned Noodle Soups.

Protein: Peanut Butter, Canned Tuna, Canned Salmon, Canned Chicken, Canned Beef Stew, Bean Soups, Canned Beans, Dried Beans, Canned Chili.

Dairy: Dried or Evaporated Milk, Infant Formula, Parmesan Cheese, Pudding (Boxed or Canned).

Other: Sugar, Syrup, Jelly, Preserves, Vegetable Oils, Lite Mayonnaise, Lite Salad Dressings.

6. Types of Structural Support - Structures MUST be structurally self-supporting. Note that any tape or other structurally-supporting items used must not disturb the can labels when removed. You can prepare structural materials prior to the Build Day (i.e. cutting boards to size and painting edges), and must bring your own ladder(s) if needed. The use of power tools will not be permissible inside the mall.

• Permissible Items: Clear and double-faced tape; velcro, magnets; high-tension rubber bands, nylon string, wire, tie-backs, zip ties; tubes, wooden and threaded rods used for alignment; one-quarter inch (1/4”) thick materials for the purpose of leveling materials and not as load bearing. Some suggestions on 1/4” thick materials from lightest to toughest: cardboard, foam core, Masonite, MDF, plywood, plexiglass.

• Non-Permissible Items: 2x4 boards; leveling boards greater than 1/4” thick; sheet metal; permanent adhesives.

• All materials other than the canned goods must be purchased by the Design Team. There is sponsor funds to cover the costs of all materials, so please keep your receipts to submit for reimbursement.

Structures must fit within a 10’ x 10’ area and must be a

maximum of 10’ high (3m x 3m x 3m)

RULE #3 – Maximum height


S A N TA F E

C. Design Criteria1. Design Theme - The theme for our Fourth Annual Event is “Rock CAN Roll”.

2. Judging Criteria - Keep in mind the following criteria that will be used by the judges:

3. Judging Categories - One sculpture will win in each of the following categories. Winners of each category will automatically be entered into Canstruction’s International Competition.

• Structural Ingenuity

• Best Use of Labels

• Best Meal

• Most Cans

• Most Original Design

• People’s Choice

4. Judging Rules - Judges will rank each sculpture based on the above criteria. Please adhere to the following rules regarding judging:

• Design Teams and Sculpture Sponsors are not to interact with judges prior to the end of the judging period. We want all judging to remain fair.

• Judging in the People’s Choice category will take place by the voting public. All winners, including People’s Choice, will be announced at the Awards Party.

5

Canstruction Judges Score Sheet JUDGES NAME: __________________________________ DATE:______________________ STRUCTURE NAME: ___________________________________________________________

Attention to Detail: Has design team utilized each label to form every detail of the structure? Labels properly positioned? Ingredients: Does structure contain nutritional ingredients? Do they account for all elements of the food pyramid? Design and Structural Ingenuity: Does the structure contain props or non permissible items? Level of difficulty & skill First Impression: Is it creative? Will it create a lasting impression? Does the structure excite or stimulate at first sight?

Structural Ingenuity Design and Structural Ingenuity 50 First Impression 20 Attention to Detail/ Label Usage 20 Ingredients 10

TOTAL

Jurors Favorite First Impression 50 Attention to Detail/ Label Usage 20 Design and Structural Ingenuity 20 Ingredients 10

TOTAL

Best Use of Labels Attention to Detail/ Label Usage 50 First Impression 20 Design and Structural Ingenuity 20 Ingredients 10

TOTAL

Best Meal Ingredients 50 First Impression 20 Design and Structural Ingenuity 20 Attention to Detail/ Label Usage 10

TOTAL


S A N TA F E

CONCEPT DEVELOPMENT

THINK OF CAPTURING A MOMENT – i.e. an apple is good but an apple witha bite out of it is better

THINK OF POP CULTURE REFERENCES– What will harness a spectator'sattention to get them to focus on hunger and your work of art?

THINK OF SOMETHING ABSTRACT – What will make someone stop to lookat your structure rather than just pass by? Is it interesting? Would you snapa photo of it?

FORMS

TALL CANS VS. SHORT CANS – Short cans (i.e. tuna cans) make greatgradual curves but they’re expensive! Think of ways to incorporate bothcans. Use small cans for the rounded portions and tall cans for straight lines.This will also give more variety of food to the food bank.

CANS VS. BOTTLES/BAGS – You are allowed to use pudding cups, bottles,bags and packets only as additional pieces and not as the primary structuralbuilding blocks (i.e. use for floor texture, floppy ears, tail etc).

6


S A N TA F E

CUBES

STRIAGHT CUTS– Be sure to create straight cuts on your levelingmaterial for mosaic and cubed structures so that the structure isperfect from all angles.

SPHERES

ALIGNMENT RODS – Wooden dowels, PVC pips and alignment rodsare acceptable and recommended for creating circular structures.

7


S A N TA F E

CONES

CANTILEVERS – Make sure your cantilevers are very gradual so eachlayer of canned food is being supported by each underlying layer.Fill in interior layers completely for the first few layers.

PIXELLATION: Think of each can as a pixel, therefore smallobjects scaled up or large objects scaled down read better.

8


S A N TA F E

CONTRAST: Contrasting colors allows your structure to standout from the background when on display. Be sure to pickcolors that wont easily blend together.

BRIGHTNESS: Bright colors will make your structure standout from the rest. If you have a choice between white andorange pick orange!

9


S A N TA F E

10


S A N TA F E

11


S A N TA F E

12


S A N TA F E

FLOOR: Get creative with your flooring. Use bags, puddingcups, bottles or tuna cans to create a textured floor.Sometimes the final touches make all the difference andhelp to keep people away from your structure.

13

Welcome to #CanSantaFe2018! - The Food Depot · 2020. 12. 7. · Dairy: Dried or Evaporated Milk,...

Documents

Transcript of Welcome to #CanSantaFe2018! - The Food Depot · 2020. 12. 7. · Dairy: Dried or Evaporated Milk,...