WEIGHT CARRYING: TRAILER WEIGHT: LBS. WEIGHT DISTRIBUTION ... · trailer weight & lbs. tongue...

5
MAKE: STYLE: MIN. 20 WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com WEIGHT CARRYING: INSTALLATION TIPS: INSTALLATION REQUIRES: VEHICLE PHOTO: HITCH ILLUSTRATION: REPRESENTATIVE PHOTO MAKE SURE YOUR HITCH MATCHES LEVEL OF DIFFICULTY: EASY MODERATE CHALLENGING 1. BEFORE YOU BEGIN INSTALLATION, READ ALL INSTRUCTIONS THOROUGHLY. 2. TO EASE INSTALLATION, 2 PEOPLE MAY BE REQUIRED. 3. USING PROPER TOOLS WILL GREATLY IMPROVE THE QUALITY OF THE INSTALL AND REDUCE THE TIME REQUIRED. 4. NEED HELP OR HAVE SOME QUESTIONS? CALL TECHNICAL SUPPORT AT 800.798.0813 Safety glasses should be worn at all times while installing this product . YEARS: 2015-PRESENT LEXUS MODEL: NX200t/NX300h SUV 3500 525 TRAILER WEIGHT: TONGUE WEIGHT: 13337 INSTALLATION INSTRUCTIONS LBS. LBS. WEIGHT DISTRIBUTION: TRAILER WEIGHT: TONGUE WEIGHT: 4000 525 LBS. LBS. MIN. 40 IF YOU ARE HESITANT TO UNDERTAKE THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED CURT INSTALLER FOR ADDITIONAL ASSISTANCE. NOVICE INSTALL TIME: PRO INSTALL TIME: SCAN FOR MORE INFO PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage. For more information log onto www.curtmfg.com This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684. 5/8/2017 EASY RATCHET TORQUE WRENCH SOCKET 19mm REMOVE (3) EXHAUST HANGERS WELDNUT CLEANING NO DRILLING SAFETY GLASSES

Transcript of WEIGHT CARRYING: TRAILER WEIGHT: LBS. WEIGHT DISTRIBUTION ... · trailer weight & lbs. tongue...

Page 1: WEIGHT CARRYING: TRAILER WEIGHT: LBS. WEIGHT DISTRIBUTION ... · trailer weight & lbs. tongue weight. gross load capacity when used as a weight distribution hitch: lbs. trailer weight

MAKE: STYLE:

MIN.20

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITYFor more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com

WEIGHT CARRYING:

INSTALLATION TIPS:

INSTALLATION REQUIRES:

VEHICLE PHOTO:

HITCH ILLUSTRATION:

REPRESENTATIVE PHOTO

MAKE SURE YOUR HITCH MATCHES

LEVEL OF DIFFICULTY: EASY

MODERATE CHALLENGING

1. BEFORE YOU BEGIN INSTALLATION, READ ALL

INSTRUCTIONS THOROUGHLY.

2. TO EASE INSTALLATION, 2 PEOPLE MAY BE

REQUIRED.

3. USING PROPER TOOLS WILL GREATLY IMPROVE

THE QUALITY OF THE INSTALL AND REDUCE THE

TIME REQUIRED.

4. NEED HELP OR HAVE SOME QUESTIONS?

CALL TECHNICAL SUPPORT AT 800.798.0813

Safety glasses should be worn at all times whileinstalling this product.

YEARS: 2015-PRESENT LEXUS MODEL: NX200t/NX300h SUV

3500

525

TRAILER WEIGHT:

TONGUE WEIGHT:

13337 INSTALLATION INSTRUCTIONS

LBS.

LBS.

WEIGHT DISTRIBUTION: TRAILER WEIGHT:

TONGUE WEIGHT:

4000

525

LBS.

LBS.

MIN.40

IF YOU ARE HESITANT TO UNDERTAKE

THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED

CURT INSTALLER FOR ADDITIONAL ASSISTANCE.

NOVICE INSTALL TIME:

PRO INSTALL TIME:

SCAN FORMORE INFO

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUNDCURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this productvoids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

For more information log onto www.curtmfg.comThis product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684. 5/8/2017

EASYRATCHET

TORQUEWRENCH SOCKET

19mm

REMOVE (3) EXHAUST HANGERS

WELDNUT CLEANING

NO DRILLING

SAFETYGLASSES

Page 2: WEIGHT CARRYING: TRAILER WEIGHT: LBS. WEIGHT DISTRIBUTION ... · trailer weight & lbs. tongue weight. gross load capacity when used as a weight distribution hitch: lbs. trailer weight

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

Parts List

DESCRIPTIONPART NUMBERQTYITEM

HEX BOLTM12-1.25 x 35mm41

CONICAL TOOTHED WASHER1/2"42

2

1

DRIVER SIDEFRAME RAIL

PASSENGER SIDEFRAME RAIL

EXISTING WELDNUTS(BOTH SIDES)

1. Lower the exhaust by removing the (3) rearmost rubber exhaust isolators. Note: Support the exhaust during installation to prevent damage. (See Rubber Isolator Removal Diagram.)

2. Raise hitch into position and loosely secure hitch with M12 bolts and conical washers.

Page 3: WEIGHT CARRYING: TRAILER WEIGHT: LBS. WEIGHT DISTRIBUTION ... · trailer weight & lbs. tongue weight. gross load capacity when used as a weight distribution hitch: lbs. trailer weight

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

3. Torque all M12 fasteners to 60 ft-lbs.

4. Raise exhaust and reinstall the rubber isolators.

Page 4: WEIGHT CARRYING: TRAILER WEIGHT: LBS. WEIGHT DISTRIBUTION ... · trailer weight & lbs. tongue weight. gross load capacity when used as a weight distribution hitch: lbs. trailer weight
Page 5: WEIGHT CARRYING: TRAILER WEIGHT: LBS. WEIGHT DISTRIBUTION ... · trailer weight & lbs. tongue weight. gross load capacity when used as a weight distribution hitch: lbs. trailer weight

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT. GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT

***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813

INSTALLATION STEPS

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS

ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.

CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.If the product is found to be defective, CURT Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid,with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited torepair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

3500 525

4000 525

LEXUS NX200t/NX300h

5/8/2017

13337

40

36

20

HITCH WEIGHT: LBS.

INSTALL TIME

PROFESSIONAL: MINUTES

NOVICE (DIY): MINUTES

INSTALL NOTES:

Scanfor moreinformation

Parts List

DESCRIPTIONPART NUMBERQTYITEM

HEX BOLTM12-1.25 x 35mm41

CONICAL TOOTHED WASHER1/2"42

1. Lower the exhaust by removing the (3) rearmost rubber exhaust isolators. Note: Support the exhaust during installation to prevent damage. (See Rubber Isolator Removal Diagram.) 2. Raise hitch into position and loosely secure hitch with M12 bolts and conical washers. 3. Torque all M12 fasteners to 60 ft-lbs. 4. Raise exhaust and reinstall the rubber isolators.

EXISTING WELDNUTS(BOTH SIDES)

PASSENGER SIDEFRAME RAIL

DRIVER SIDEFRAME RAIL

2

1

- LOWER EXHAUST- NO DRILLING

TOOLS REQUIRED

RATCHET

TORQUE WRENCH

19mm SOCKET

SAFETY GLASSES