week 10
-
Upload
tekamantoaezekielkaitu -
Category
Documents
-
view
226 -
download
9
description
Transcript of week 10
-
Use Point creat Point 1 and Point 2 and Point 3 Use line connect Point 1 and Point 2
Practice 1. Use Shape design
-
Use Helix
-
Create Plane > Normal to curve
In xy-plane draw circle 30x50 , Use Pad Go back Part design
-
Select new Plane as your sketch and draw
-
Use Rib
-
Use thickness
-
Use Split
-
Use circular pattern
-
Practice 2. Draw this sketch in zx plane
-
Create new plane
-
Draw this sketch in new plane
-
Use Point creat Point 1 and Point 2
-
Use "multi-section surface"
-
Draw this sketch in zx plane Use Extruded
-
Draw this sketch in zx plane Draw this sketch in xy plane(use spline)
-
Use sweep Profile->Sketch.5 Guide curve->Sketch.6
Use symmetry and mirror sweep.1
-
Use Trim select two connect surface And repeat the action in the other connect surfaces
-
Draw this sketch in xy plane
Use Extruded
-
Draw this sketch in yz plane Use Extruded
-
Use Trim cut you dont want
-
Use Edge Fillet Finish
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21