Weco Hammerless Union Catalog 2012

7/28/2019 Weco Hammerless Union Catalog 2012

http://slidepdf.com/reader/full/weco-hammerless-union-catalog-2012 1/14

Flowline Products and ServiceWorld Proven Chiksan® and Weco® Equipme

http://www.mctechnologies.co



Hammerless Union (HL)Recommended serviceHammerless union connection has the same industry

thread as Hammer Union but provides a saer andstronger connection.

Male sub end o conventional iron is unchanged

Hammerless union has the sameinner prole o the traditionalhammer union

It is stronger with a minimum

weight gain

Hammerless union converts a

standard wing union connection

into a sae hammerlessconnection

Raised rib discourages

use o sledge hammerand improves structural

integrity while

distributing impact load

Female sub end o

conventional iron isunchanged

Large radius edge indicatesopen side o threaded HL

union

Forged eyebrow relie aligns

HL Tool to lug

Lug hole has lead-in chamer

on both sides. HL union has

no external impact, surace

eliminating grinding o ears

The Hammerless union is the next generation o union products targeted at eliminating

the use o sledge hammer in making up high pressure temporary owline connections

in the feld. This product was inspired by the desire or improved saety through the

elimination o hammer related injuries.

Anticipated applications or the Hammerless union is well service temporary ow lines,

with particular attention toward applications in racturing, stimulation, cementing, and

pipelines operations. However, any area in which space is constrained or swinging a

hammer is dangerous, this product is a probable ft.

32FMC Technologies, Inc.



Hammerless Union Tools

Hammerless Spanner WrenchThis tool has leverage to align iron

while making up the threads o HL

Union

Hammerless Long ToolThe Two-Person HL Long Tool is connected to HL union lug to saely

‘impact’ tighten threads ater making up with HL Spanner wrench

•First person holds tapered Non-Pinch Handle at preferred angle and

direction o impact

•Second person uses spring-loaded swing handle to deliver controlled

impact to HL Union

Hammerless Short ToolThe *One-Person HL Short Tool is

connected to HL union lug to saelyimpact tighten threads ater making up

with HL Spanner Wrench. Operator usesthis tool at elevated wellhead connections

to tighten HL Union using one hand while

tool remains saely attached

Round Wire BrushUse to clean Iron threads and HL

union threads

Use to clean HL union lug hole

beore attaching HL Tools

One Tool fts all HL sizes.

3FMC Technologies, Inc



Interchangeable parts

Weco wing union parts o the same fgure number, size and pressure rating are interchangeable,

making it easy to match male and emale subs that are requently made-up and broken-out.

For positive identifcation in the feld, all Weco wing union nuts and subs include the Weco

name, fgure number, size and pressure rating. It is vital that the user positively identiy union

connections and components to avoid mismatch conditions and potential union ailure. See insid

back cover or details.

Warning

Proven Seal DesignsLow-Pressure Services (1,000 to 2,000 psiWeco wing unions or low-pressure services

eature a primary metal-to-metal seal. The

spherical surace o the male sub and conical

surace o the emale sub provide a large, ball-

and-cone sealing surace. This metal-to-metalseal remains leak-proo even when one surace is

slightly pitted or misaligned.

Metal-to-

metal seal

Male sub

Female sub

Medium-Pressure Services(2,000 to 4,000 psi)Many Weco wing union designs supplement the

metal-to-metal seal with a resilient O-ring in the

male sub. The replaceable O-ring extends union

lie and protects the metal-to-metal seal against

corrosion.

Male sub

Female sub

Metal-to-

metal seal

Seal ring

High-Pressure Services (6,000 to 20,000psi)Weco wing unions or high-pressure services

eature a replaceable, lip-type seal ring in the

emale sub. This primary seal protects the

secondary metal-to-metal seal rom abrasion and

corrosion while minimizing ow turbulence.

Female sub

Male subMetal-to-

metal seal

Seal ring

NPS (Non-Pressure Seal) Option Figures602, 1002, and 1502)The Weco non-pressure seal option is especially

designed or abrasive, high-pressure wing

union services where welded connections are

undesirable. This design provides strong,

permanent end connections without butt welding

The union ends are shop assembled to pipe or

tubing. An epoxy thread compound is used to

secure the connection.

Female sub

Male subTubing or

pipe

Seal ring




Figure

Number

Assembly

Color Key

Standard

Service

Pressure Rating, psi, bar

Standard Sour Gas (see note 8) 1

25

1 1 ⁄ 4

32

1 1 ⁄ 2

40Cold

WorkingTest

Cold

WorkingTest

100 1,00069

1,500103

NA NA

2002,000

138

3,000

207NA NA

2062,000

238

3,000

207NA NA

2072,000

138

3,000

207NA NA

2112,000

138

3,000

207NA NA

400 2,500172

3,750259

2,500172

3,750259

4004,000

276

6,000

414

4,000

276

6,000

414

6026,000

414

9,000

621

6,000

414

9,000

621

100210,000

690

15,000

1034

7,500

517

11,250

776

100310,000

690

15,000

1034

7,500

517

11,250

776

1502 15,0001034

22,5001551

10,000690

15,0001034

200220,000

1379

30,000

2068NA NA

2202 NA NA15,000

1034

22,500

1551

NOTES

• NA - Not Available

• All end connections with line pipe threads unless otherwise noted.

1. Butt-weld available. Consult actory or wall thickness.2. Non pressure seal congurations available.

3. Power make-up must be used or line pipe threaded connections to achieve rated cold working pressure.

4. Line pipe threads are not oered or sour gas service in this gure number.

5. Line pipe threads are not recommended or sour gas service above 4-inch nominal pipe size.

6. Figure 400 available in 5 1 ⁄ 2 - and 7-inch OD with casing threads.

7. Available in butt-weld ends only.

Wing Unions



Nominal Pipe Sizes, inches

Notes2

50

2 1 ⁄ 2

65

3

80

4

100

5

125

6

150

8

200

10

250

12

300

1

1

1

1,5,6

1,4

1,2

1,2,3,9

1,3,10

1,2,3

7

7

8. All unions or sour gas service are painted olive green, stamped “SOUR GAS” or “NACE MR-01-75” and have specially modied material

properties.

9. 5 and 6-inch sizes rated at 7,500 psi CWP and 11,250 test; 5 and 6-inch unions or sour gas service rated at 5,000 psi CWP and 7,500

psi test.10. 4 and 5-inch sizes rated at 7,500 psi CWP and 11,250 test; 4 and 5-inch unions or sour gas service rated at 5,000 psi CWP and 7,500

psi test.

Sour gas service

FMC manuactures Weco sour gas unions in accordance with the National Association o Corrosion Engineers (NACE) Standard MR-01-75

and American Petroleum Institute’s (API) Standard RP-I4-E.




Figure 1001,000 psi cold working pressure

Recommended serviceManiold and line connections

Features

• Pressure-tight make-up with

hammer

• Economical low-pressure union


Recommended serviceSeals maniold connections and protectsunion threads

Features

• Parts interchangeable with Figures200 and 206

• O-ring on blanking cap ensures aleak-ree seal

• Cap can be tapped or pressure

gauge• Available in butt-weld


Recommended serviceGeneral service maniolds and lines

Features

• Economical, general-purpose union• 1 to 4-inch sizes


Recommended serviceProduction systems with electrolyticcorrosion problems

Features

• Laminated insulating rings provide35 million ohms resistance acrossthe union

• O-ring in male sub provides a

positive primary seal• Seal ring in emale sub delvers a

positive secondary seal


Recommended serviceManiold line connections, suctionservice, and corrosion service

Features

• O-ring in male sub improves

sealing and protects metal-to-metal seal against corrosion

• Replaceable O-ring extendsunion service lie

• 1 to 10-inch sizes

Figure 4004,000 psi cold working pressurethrough 4-inch sizes; 2,500 psi cold

working pressure, 5 through 12-inchsizes

Recommended serviceManiold line connections, pump

suction, and mud services

Features

• 2-1/2 through 12-inch sizes have

O-rings or primary seal• Butt-weld available• Available or sour gas service

See specications tables (pg. 65 - 69) or sizes, dimensions, weights, materials, and part numbers.



See specications tables (pg. 65 - 69) or sizes, dimensions, weights,

materials, and part numbers.


through 4-inch sizes; 7,500 psi coldworking pressure, 5 and 6-inch sizes

Recommended serviceCementing, racturing, acidizing,testing, and choke-and-kill lines

Features• O-ring in male sub improves

sealing and protects metal-to-

metal seal against corrosion• Replaceable O-ring extends

union service lie• 1 to 10-inch sizes

Figure 1003

Misaligning union10,000 psi cold working pressure, 2and 3-inch sizes; 7,500 psi cold workingpressure, 4 and 5-inch sizes

Recommended serviceFor high-pressure connections wherelines cannot be aligned

Features

• Ball seat provides positive seal withup to 7-1/2° misalignment; 2-inchmodel up to 4°

• Replaceable O-ring on male subprovides primary seal

• Available with threaded or butt-

weld ends


Recommended serviceCementing, racturing, acidizing,

testing, and choke-and-kill lines

Features

• Replaceable, lip-type seal• Available or sour gas service:

10,000 psi cold working pressure;butt-weld or non-pressure seal

congurations only• Butt-weld available


Recommended serviceCementing, racturing, acidizing,testing, and choke-and-kill lines

Features

• Replaceable, lip-type seal• 2 and 3-inch line sizes• Butt-weld congurations only


Recommended serviceManiold line connections and mudservice

Features

• Replaceable, lip-type seal provides

primary seal, protects secondarymetal-to-metal seal, and minimizesfow turbulence

• Butt-weld available• Available or sour gas service at

6,000 psi cold working pressure


Note

Note: To enhance saety,

2” Figure 602 and 1002

emale subs have been

modifed so they cannot

engage the 2” Figure

1502 nut. Also, a Go No-

Go identifcation ring is

available to determinewhether the emale sub

is a 2” Figure 602/1002

or a 2” Figure 1502.



Quick, positive identifcationWeco unions or sour gas service arestamped “Sour Gas” and painted with

an olive green zinc-chromate primer to

ensure quick, positive identication.

Figure 4004,000 psi cold working pressure, 1 through 4-inch sizes;

2,500 psi cold working pressure, 5 through 12-inch; butt-weld only above 4-inch sizes

Figure 6026,000 psi cold working pressure, 1 through 4-inch sizes


5,000 psi cold working pressure, 5 and 6-inch sizes

Figure 10037,500 psi cold working pressure, 2 and 3-inch sizes;

5,000 psi cold working pressure, 4 and 5-inch sizes


butt-weld or non-pressure seal congurations only

Figure 220215,000 psi cold working pressure, 2, and 3-inch sizes;

butt-weld only

Controlled hardnessWeco union subs and nuts

are specially heat-treated and

100% tested or controlledhardness.

Sour Gas Service

Weco® Wing Unionsfor Sour Gas Service

FMC Technologies manuactures Weco sour gas

wing unions in accordance with the National

Association o Corrosion Engineers (NACE)

Standard MR-01-75 and American Petroleum

Institute (API) Standard RP-14-E. Theseoutstanding, feld-proven unions are specially

heat treated or controlled hardness. For ast, sure

identifcation, each Weco sour gas union is stamped

“Sour Gas” or “NACE MR-01-75” using low stress

dot stamping and painted with an olive green

zinc-chromate primer that is unique to sour gas

equipment. FMC Fluid Control uses uoroelastomer

seals or O-rings in all sour gas unions, but does not

warrant the perormance o any elastomer or sour

gas service.

Caution:

Meets industry standardsAll Weco wing unions or sour gas service

meet both the National Association o

Corrosion Engineers Standard MR-01-75 andAPI Standard RP-14-E.

Positive sealingPrimary fuoroelastomer

seal and metal-to-metal seal combine to

deliver positive sealing

throughout the stated

pressure range.

See specications tables (pg. 65 - 69) or sizes, dimensions, weights, materials, and part numbers.

It is possible to interchange sour gas parts with standard service

products. Users must adopt sae practices or identifcation,

installation, use, maintenance, and storage o sour gas

equipment. (See inside back cover or additional Warnings and

Cautions.)



NominalPipe Size in. 2 2 1 ⁄ 2 3 4 6 8

Union Part No.Qty/Carton

320060916

320061010

32006116

32006124

32007951

32007961

A ClearanceRadius

in.mm 3 3 ⁄ 16

3 15 ⁄ 16

1004 1 ⁄ 2114

5 5 ⁄ 16

1356 15 ⁄ 16

1768 7 ⁄ 32

209

B OutsideDiameter

in.mm 2 3 ⁄ 4 3 1 ⁄ 4

834

1025 3 ⁄ 16

1327 5 ⁄ 16

1869 15 ⁄ 32

241

C End-to-endThreaded

in.mm 3 5 ⁄ 8 4 9 ⁄ 32

1094 7 ⁄ 8124

5 3 ⁄ 4146

6 23 ⁄ 32

1717 3 ⁄ 16

183

D InsideDiameter

in.mm 2 5 ⁄ 32

2 9 ⁄ 16

653 3 ⁄ 16

814 3 ⁄ 16

1066 9 ⁄ 32

1608 1 ⁄ 4209

Weight lbkg

62.7

104.5

146.4

2210

4520.4

6630

Material, SubMaterial, Nut

DIDI

DIDI

DIDI

DIDI

DIDI

DIDI

NominalPipe Size in. 1 1 1 ⁄ 4 1 1 ⁄ 2 2 2 1 ⁄ 2 3 4


320082940

320096028

320077328

320077816

320089910

32007826

32009124

A ClearanceRadius

in.mm

1 31 ⁄ 32

502 1 ⁄ 457

2 1 ⁄ 264

376

3 9 ⁄ 16

904

1024 11 ⁄ 16

119

B OutsideDiameter

in.mm

1 19 ⁄ 32

402

512 1 ⁄ 457

2 29 ⁄ 32

743 13 ⁄ 32

844 3 ⁄ 32

1045 1 ⁄ 8130


in.mm

2 19 ⁄ 32

662 25 ⁄ 32

712 25 ⁄ 32

713 9 ⁄ 16

904 1 ⁄ 8105

4 17 ⁄ 32

1154 15 ⁄ 16

125

D

Inside

Diameter

in.

mm

1 1 ⁄ 8

28

1 15 ⁄ 32

37

1 22 ⁄ 32

43

2 5 ⁄ 32

55

2 9 ⁄ 16

65

3 3 ⁄ 16

81

4 3 ⁄ 16

106

Weight lbkg

20.9

20.9

31.4

52.3

94.1

135.9

188.2


CSDI

CSDI

CSDI

DIDI

CSDI

SFSF

SFSF

NominalPipe Size in. 1 1 1 ⁄ 4 1 1 ⁄ 2 2 2 1 ⁄ 2 3 4 6 8 10


320762740

320763328

320763628

320728116

320727810

32030486

32054494

32025211

32025521

32025661

A Clearance

Radius

in.

mm

2

51

2 1 ⁄ 4

57

2 1 ⁄ 2

64

3

76

3 9 ⁄ 16

90

4

102

4 11 ⁄ 16

119

6 1 ⁄ 4

159

7 7 ⁄ 16

189

9

229B Outside

Diameterin.

mm1 19 ⁄ 32

401 31 ⁄ 32

502 1 ⁄ 457

2 13 ⁄ 16

713 11 ⁄ 32

854 3 ⁄ 32

1045 1 ⁄ 8130

7 1 ⁄ 2191

9 9 ⁄ 16

24311 1 ⁄ 2292


in.mm

2 21 ⁄ 32

672 25 ⁄ 32

712 25 ⁄ 32

713 1 ⁄ 483

4 1 ⁄ 8105

4 17 ⁄ 32

1155

1276 21 ⁄ 32

1697 3 ⁄ 16

1839 3 ⁄ 32

231

D InsideDiameter

in.mm

1 1 ⁄ 828

1 15 ⁄ 32

371 22 ⁄ 32

432 5 ⁄ 32

552 9 ⁄ 16

653 3 ⁄ 16

814 3 ⁄ 16

1066 9 ⁄ 32

1608 1 ⁄ 4209

10 5 ⁄ 16

262

Weight lbkg

20.9

20.9

31.4

52.3

83.6

135.9

188.2

4219.1

6529.5

9040.8


CSDI

CSDI

CSDI

SFDI

CSDI

SFSF

SFSF

SFSF

SFSC

SFSC

Weco® Wing Union Specifcations

Figure 100 - 1,000 psi (69 bar) cold working pressure



D

B

C

A

Materials: AS - Alloy Steel, CS - Carbon Steel, DI - Ductile Iron Casting, SC - Steel Casing, SF - Steel Forging

FMC Technologies, Inc. Flowline Products & Services



S p e c i f c a t i o n s

Nominal

Pipe Sizein. 3 4 6 8 10


32079068

32079074

32079081

32079811

32079821

A ClearanceRadius

in.mm

5 3 ⁄ 4146

7 3 ⁄ 16

1359 15 ⁄ 16

25212 3 ⁄ 8314

14 1 ⁄ 2368

B OutsideDiameter

in.mm

4 3 ⁄ 32

1045 1 ⁄ 8130

7 1 ⁄ 2191

9 9 ⁄ 16

24311 1 ⁄ 2292


in.mm

3 3 ⁄ 495

4 5 ⁄ 16

1095 13 ⁄ 16

1488 5 ⁄ 8219

9 11 ⁄ 16

246

D InsideDiameter

in.mm

3 3 ⁄ 16

814 3 ⁄ 16

1066 9 ⁄ 32

1608 1 ⁄ 4209

10 5 ⁄ 16

262

Weight lb

kg

10

4.5

16

7.3

37

16.8

70

31.9

96

43.5Material, SubMaterial, Nut

SFSC

SFSF

SFSC

SFSC

SFSC

Nominal

Pipe Sizein. 1 2


320536940

320534316

A ClearanceRadius

in.mm

2 1 ⁄ 854

3 1 ⁄ 879

B OutsideDiameter

in.mm

1 9 ⁄ 16

402 7 ⁄ 873


in.mm

2 3 ⁄ 470

3 15 ⁄ 32

88

D InsideDiameter

in.mm

1 1 ⁄ 828

2 5 ⁄ 32

55

Weight lbkg

20.9

62.7


CSDI

SFDI

NominalPipe Size in. 2 2 1 ⁄ 2 3 4 5 1 ⁄ 2 OD* 6 7 OD* 8 12


32002916

32002905

32002924

32003373

32063471

32021791

32043331

32020601

32015781

A ClearanceRadius

in.mm

3 1 ⁄ 289

4 1 ⁄ 32

1034 3 ⁄ 8111

5127

5 16 ⁄ 16

1486 3 ⁄ 4171

6 3 ⁄ 4171

7 13 ⁄ 16

19810 23 ⁄ 32

272

B OutsideDiameter

in.mm

3 1 ⁄ 16

783 1 ⁄ 289

4 5 ⁄ 32

1065 7 ⁄ 32

1336 1 ⁄ 4159

7 3 ⁄ 4197

7 3 ⁄ 4171

9 19 ⁄ 32

24414

356


in.mm

5 1 ⁄ 4133

6 1 ⁄ 16

1546 7 ⁄ 32

1588 7 ⁄ 32

20910 15 ⁄ 32

26611 1 ⁄ 16

28111 1 ⁄ 16

28111 7 ⁄ 16

29110 15 ⁄ 16

278

D InsideDiameter

in.mm

2 5 ⁄ 32

552 9 ⁄ 16

653 3 ⁄ 16

814 3 ⁄ 16

1065 1 ⁄ 8130

6 9 ⁄ 32

1606 21 ⁄ 32

1698 1 ⁄ 4209

12 11 ⁄ 32

313

Weight lbkg

115

167.3

198.6

2812.7

4721.3

6429

6127.7

9543.1

16373.9


SFSF

CSSF

SFSF

SFSF

SFSC

CSSC

CSSC

SFSC

SCSC


Figure 207 - 2,000 psi (138 bar)cold working pressure

Figure 400 - 4,000 psi (276 bar) to 4”; 2,500 psi (172 bar)cold working pressure, 5” to 12”

D

B

C

A

* Casing thread standard

Note: 2 inch does have O-ring

Materials: AS - Alloy Steel, CS - Carbon Steel, DI - Ductile Iron Casting, SC - Steel Casing, SF - Steel Forging



6





D

B

C

A

NOTES:AS - Alloy Steel, CS - Carbon Steel, DI - Ductile Iron Casting, CS - Steel Casting, SF - Steel Forging

NominalPipe Size in. 2 3 4


32085196

32199282

32199321

A ClearanceRadius in.mm 3 3 ⁄ 495 4 7 ⁄ 8124 5 3 ⁄ 4146

B OutsideDiameter

in.mm

376

4 3 ⁄ 8111

5 1 ⁄ 2140


in.mm

4 21 ⁄ 32

1189 1 ⁄ 8232

10 15 ⁄ 16

278

D InsideDiameter

in.mm

2 5 ⁄ 32

553 3 ⁄ 16

814

102

Weight lbkg

125.4

4520.4

7433.6


ASSF

ASSC

ASSF

* 5” available with butt weld ends; consult actory or other confgurations.

NominalPipe Size in. 1 1 1 ⁄ 4 1 1 ⁄ 2 2 2 1 ⁄ 2 2 1 ⁄ 2 (EUE) 3 4


320568132

320567510

320566510

P5350636

32056265

32069275

32055654

32055332

A ClearanceRadius

in.mm

2 7 ⁄ 32

563 1 ⁄ 32

773 1 ⁄ 32

773 13 ⁄ 16

973 7 ⁄ 899

4102

4 17 ⁄ 32

1154 31 ⁄ 32

126

B OutsideDiameter

in.mm

1 3 ⁄ 444

2 9 ⁄ 16

652 9 ⁄ 16

653 3 ⁄ 32

783 1 ⁄ 289

3 11 ⁄ 16

944 1 ⁄ 4108

5 5 ⁄ 16

135


in.mm

3 17 ⁄ 32

904 7 ⁄ 8124

4 7 ⁄ 8124

5 3 ⁄ 4146

6 1 ⁄ 8156

5 15 ⁄ 16

1516 7 ⁄ 32

1588 7 ⁄ 32

209

D InsideDiameter in.mm 11

⁄ 828 113

⁄ 3236 1

11

⁄ 1643 2

1

⁄ 1652 2

9

⁄ 1665 2

13

⁄ 1671 3

3

⁄ 1681 4

3

⁄ 16106

Weight lbkg

41.8

104.5

94.1

167.3

188.2

167.3

2210

3214.5


ASSF

ASSF

ASSF

SFSF

ASSC

ASSF

ASSF

ASSF

Figure 1002 - 10,000 psi (690 bar) to 4”; 7,500 psi (517 bar) cold working pressure, 5”-6” *

* 5” - 6” available with butt weld ends; consult actory or other confgurations.

NominalPipe Size in. 1 1 1 ⁄ 4 1 1 ⁄ 2 2 3 4


320237732

32024349

32024289

P5335646

32024164

32023992

A ClearanceRadius

in.mm

2 3 ⁄ 860

3 1 ⁄ 483

3 1 ⁄ 483

3 5 ⁄ 892

4 1 ⁄ 2114

5 3 ⁄ 16

132

B OutsideDiameter

in.mm

1 3 ⁄ 444

2 9 ⁄ 16

652 9 ⁄ 16

653 3 ⁄ 32

784 5 ⁄ 32

1065 7 ⁄ 32

133


in.mm

3 17 ⁄ 32

904 7 ⁄ 8124

4 7 ⁄ 8124

5 3 ⁄ 4146

6 1 ⁄ 4159

8 1 ⁄ 4210

D InsideDiameter

in.mm

1 1 ⁄ 828

1 13 ⁄ 32

361 11 ⁄ 16

432 1 ⁄ 16

523 3 ⁄ 16

814 3 ⁄ 16

106

Weight lbkg

31.4

104.5

94.1

156.8

219.5

3114


CSSF

CSSF

CSSF

SFSF

SFSF

SFSF

Figure 1003 - 10,000 psi (690 bar) 2”-3”;7,500 psi (517 bar) cold working pressure 4”-5” *




S p e c i f c a t i o n s

NominalPipe Size in. 1 1 1 ⁄ 2 2 2 1 ⁄ 2 3 4*


325405919

325405710

32015705

32030884

32075103

32529261

A ClearanceRadius

in.mm

2 7 ⁄ 873

3 21 ⁄ 32

933 29 ⁄ 32

994 5 ⁄ 32

1064 1 ⁄ 2114

6300

B OutsideDiameter

in.mm

2 3 ⁄ 16

552 31 ⁄ 32

753 3 ⁄ 16

813 3 ⁄ 495

4 13 ⁄ 32

1125 3 ⁄ 4146


in.mm

4 11 ⁄ 32

1105 13 ⁄ 32

1377

1787 1 ⁄ 4184

7 5 ⁄ 8194

8 1 ⁄ 2*216

D InsideDiameter

in.mm

1 1 ⁄ 828

1 11 ⁄ 16

432 1 ⁄ 16

522 9 ⁄ 16

653 3 ⁄ 16

81——

Weight lbkg

94.1

177.7

198.6

2210

3013.6

6429


ASSF

ASSF

SFSF

ASSC

ASSF

ASSF

NominalPipe Size in. 2 3


32227615

32459111

A ClearanceRadius

in.mm

3 3 ⁄ 495

6 3 ⁄ 32

155

B OutsideDiameter

in.mm

2 19 ⁄ 32

665 1 ⁄ 2140


in.mm

7 13 ⁄ 32

18810 1 ⁄ 2267

DInsideDiameter

in.mm

1 5 ⁄ 16

333

76

Weight lbkg

219.5

8739.5

Material AS AS

NominalPipe Size in. 6 8 10 12


32550612

32548641

32550641

32550671

A ClearanceRadius

in.mm

6 1 ⁄ 4159

7 1 ⁄ 2191

8 1 ⁄ 2213

9 3 ⁄ 4244

B OutsideDiameter in.mm 77

⁄ 8199 97

⁄ 8247 117

⁄ 8297 14356

C End-to-face in.mm

4 3 ⁄ 8111

4 3 ⁄ 8111

4 1 ⁄ 2114

4 1 ⁄ 2114

D InsideDiameter

in.mm

3 ⁄ 819

3 ⁄ 819

3 ⁄ 819

3 ⁄ 819

E Seal insidediameter

in.mm

6 5 ⁄ 8168

8 5 ⁄ 8219

10 3 ⁄ 4273

12 3 ⁄ 4324

F BW insidediameter

inmm

7 3 ⁄ 8187

9 5 ⁄ 16

23711 3 ⁄ 8289

13 1 ⁄ 2343

Weight lbkg

2210

3114.1

3716.8

5821.8

Material SC SC SC SC

NominalPipe Size in. 2 3


32357465

32579941

A ClearanceRadius

in.mm

3 3 ⁄ 495

6 3 ⁄ 32

155

B OutsideDiameter

in.mm

2 7 ⁄ 873

5 1 ⁄ 2140


in.mm

8 13 ⁄ 16

22410 1 ⁄ 2267

DInsideDiameter

in.mm

1 5 ⁄ 16

333

76

Weight lbkg

2210

5324

Material AS AS



Tank unions - 500 psi (34 bar)maximum line pressure

D

B

C

A

NOTES: AS - Alloy Steel, CS - Carbon Steel, D I - Ductile Iron Casting, CS - Steel Casting, SF - Steel Forging

* Non-Pressure Seal

D

C

A

E

F

B




8



FMC Technologies, Inc.

FMC Fluid Control

2825 West Washington

Stephenville, Texas 76401

Phone: 254-968-2181Fax: 254-968-5709

Broussard, Louisiana

Phone: 337-837-0700Fax: 337-839-2235

Alice, Texas

Phone: 361-668-0886Fax: 361-668-0905

Bossier City, Louisiana

Phone: 318-752-2312 / 2973Fax: 318-549-9540

Odessa, Texas

Phone: 432-552-9150Fax: 432-552-9151

Rock Springs, Wyoming

Phone: 307-382-4244Fax: 307-382-4454

Vernal, Utah

Phone: 435-781-1790Fax: 435-781-2693

Longview, Texas

Phone: 903-757-4180

Fax: 903-757-2514

Mineral Wells, Texas

Phone: 940-328-0800Fax: 940-328-0803

Farmington, New Mexico

Phone: 505-327-0634Fax: 505-327-0641

Oklahoma City, Oklahoma

Phone: 405-787-6301 / 6304 / 6309Fax: 405-787-6090

Grand Junction, Colorado

Phone: 970-245-1553 / 1563 / 1557Fax: 970-245-6066

Bryan, Texas

Phone: 979-778-1570Fax: 979-778-1572

Conway, ArkansasPhone: 501-329-8885Fax: 501-329-8886

Williston, North Dakota

Phone: 701-572-5021Fax: 701-572-5024

Aberdeen, Scotland

Phone: +44-1224-898-555Fax: +44-1224-249-460

Dubai, United Arab EmiratesPhone: +971-4-883-0303Fax: +971-4-883-0404

Singapore

Phone: +65/6-8613011Fax: +65/6-3162605

Jakarta, Indonesia

Phone: +62-21440-4151Fax: +62-21440-4050

Villahermosa, Tabasco, Mexico

Phone: +52-993-310-4876Fax: +52-993-310-4879

Maracaibo, Estado Zulia, Venezuela

Phone: +58-261-736-0911Fax: +58-261-736-0201

Rio de Janeiro, Brazil

Phone: +55-22-2773-0707Fax: +55-22-2773-0708

Santa Fe de Bogota, Colombia

Phone: +57-1635-1470Fax: +57-1691-8384

FMC International Service Centers

Red Deer, Alberta, Canada

Phone: 403-341-4417Fax: 403-309-9276

Redcli, Alberta, Canada

Phone: 403-526-3321Fax: 403-526-8036

Clairmont, Alberta, Canada

Phone: 780-567-2398Fax: 780-567-2143

Stavanger, Norway

Phone: +47-51-64-65-00Fax: +47-51-64-65-01

Neuquen, Argentina

Phone: +54-299-445-1562Fax: +54-299-445-1525

San Fernando, Trinidad

Phone: 868-657-8561Fax: 868-652-0884

Singapore

Phone: +65/6-545-1661Fax: +65/6-502-7411

FMC Authorized Service Centers

We put you frst.And keep you ahead.

Weco Hammerless Union Catalog 2012

Documents

Transcript of Weco Hammerless Union Catalog 2012