Webb Pump - Put the Horsepower of Webb Behind Your Process

4

description

Webb Pump is a state-of-the-art pump sales and service facility, with both on-site and field repair capabilities.

Transcript of Webb Pump - Put the Horsepower of Webb Behind Your Process

Webb Pump is a

state-of-the-art pump sales and

service facility headquartered in

Cranston, Rhode Island with a

satellite office in Winslow, Maine.

Our staff of sixteen pump profes-

sionals includes a fully-staffed

service operation, complemented

by two field service trucks with

overhead lifting cranes. Our trucks

carry dedicated tooling and one

is complete with an on-board air

compressor; all designed to allow

our staff the ability to quickly com-

plete even the most demanding field

service work. Our facility is factory

authorized for several major pump

manufacturers, including Zoeller,

Myers-Aplex, and Alfa Laval.

Our staff can remove your pump from the field and deliver it to our facility for disassembly and diagnosis within 48 hours.

Pumps are completely disassembled and

new components are installed in-house.

Rebuilds can be provided with factory OEM parts or we can machine components locally for rapid turnaround.

The final assembly is hydrostatically tested (where appropriate), painted with a protective coating and returned to your facility ready to run!

Pump expertise

from the company

you trust.

In addition to our two service

trucks, our parent company, F.W.

Webb, maintains a fleet of over

250 trucks in New England and

Upstate New York along with a

company owned tractor-trailer

distribution network. This “hub

and spoke” network offers our

customers an option to easily

(and inexpensively) move large

and cumbersome items without

the challenges of commercial

trucking.

• Full inventory of common pumps and pump parts for our major vendors

• Fleet of two fully-equipped service trucks including lifting cranes (one two-ton, one three-ton)

• Pruftechnik Optalign Laser Alignment tool with full computer documentation

• In-house machining capability• 250 amp TIG welder• Plasma Cutter• Two sandblasting booths and a full paint booth • Temperature controlled bearing heaters

• 24/7 field service available• 48 hour (or less) turnaround time on pump evaluations

– most are actually done the same day we receive them• Fabrication of pump bases and skids• Machining of rotors to meet flow requirements• Rebuilding of motors including bearing replacement• Wiring of pump controls as required• Sand-blasting and paint booth for pump reconditioning• Ability to pressure and flow-test rebuilt pumps

(size dependent)• Laser-Alignment of pumps and motors both in-house

and in the field along with a complete electronic report of final alignment

• Variable-Frequency drive troubleshooting and set-up in the field

• Ability to repair and recondition pumps in-house from virtually any manufacturer

• More than 27 years of pump rebuilding and field-troubleshooting experience between our service technicians

In addition to rebuilds, Webb Pump custom-fabricates bases for new pump & motor assemblies in-house.

Laser alignment of pumps is our specialty, making your seals last longer. We offer this service both in the shop and after installation

in the field, and our equipment can provide computer printouts of

the final alignment specs.

Our Cranston Service Operation consists of the following:

Capabilities include:

Since 1866,

F. W. Webb Company

has serviced its customers in

New England and New York. Currently, the

Webb network operates in seven states and

has over 65 locations. Webb offers a com-

plete array of Plumbing, Hydronics, HVAC,

Refrigeration, LP Gas Products, Biotech,

Pumps, Valve Automation and Pipe, Valves

and Fittings.

F. W. Webb’s mission statement proudly

declares “by constantly and consistently

improving customer service, we `delight´

our customer.”

Custom-built Webb Pump Booster System to replace existing system above.

Existing system in an industrial facility.

3 Slater Road Cranston, RI 02920

Servicing New England and Upstate New York

Rhode Island • Massachusetts • Connecticut3 Slater Road • Cranston, RI 02920Tel: 866.850.7867 • Fax: 401.463.6056 Contact: Brian Clark

Vermont • New Hampshire • Maine37 Heywood Road • Winslow, ME 04901Tel: 800.533.1172 • Fax: 207.873.2672 Contact: Mike Achorn

New York158 Syracuse Street • Syracuse, NY 13204Tel: 866.850.7867 Contact: Brian Clark

2000-906

Webb Pump offers both pre- packaged as well as custom booster systems. Our team can work with you to select a new system to meet vir-tually any flow or system requirement, or we can re-place your existing booster system with the latest drives and energy-saving designs. Our custom fabrication cap-ability even allows us to build systems that match up to your existing footprint and piping, all at a very reasonable price.