€¦ · Web viewUnsuitable substrates are high pressure laminate, plaster, concrete, and gypsum...

SECTION 06 40 23.10PLASTIC LAMINATES

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2016 - 2016 ARCAT, Inc. - All rights reserved

1 GENERAL

1.1 SECTION INCLUDES

1.1.1 Decorative Plastic Laminate:1.1.1.1 Standard Decorative Laminates.1.1.1.2 High Definition Laminates.1.1.1.3 Solicor Laminates.1.1.1.4 x You Laminates.1.1.1.5 Virtual Design Library Laminates.1.1.1.6 Markerboard Laminates.1.1.1.7 Chalkboard Laminates.1.1.1.8 Fire-Rated Decorative Laminates.1.1.1.9 Compact Laminates.1.1.1.10 Chemical-Resistant Decorative Laminates.1.1.1.11 High Wear Decorative Laminates.1.1.1.12 Cabinet Liners.1.1.1.13 Phenolic Backer Sheets.1.1.1.14 Decorative Edges and Edgeband.1.1.1.15 Accessory Materials.

1.1.2 Decorative Plastic Laminate Resurfacing:

1.1.3 Decorative Metal Laminates:1.1.3.1 Decorative metal vertical cladding.1.1.3.2 Decorative metal signage.1.1.3.3 Decorative metal trim elements.

1.1.4 Laminating Adhesives:1.1.4.1 Shop and field applied contact adhesives for postforming and non-postforming

laminate applications.1.1.4.2 Cold press PVA applications.1.1.4.3 Hot press PVA applications.1.1.4.4 Pinch roller/postforming PVA applications.

1.2 RELATED SECTIONS

1.2.1 Section 06 10 00 - Rough Carpentry.

1.2.2 Section 06 41 13 - Wood-Veneer-Faced Architectural Cabinets

1.2.3 Section 06 42 19 - Plastic-Laminate-Faced Wood Paneling

1.2.4 Section 08 11 23 - Bronze Doors and Frames.

1.2.5 Section - .

06 40 23.10-1

1.2.6 Section 08 91 19 - Fixed Louvers.

1.2.7 Section 12 35 50.56 - Built-In Study Carrels.

1.2.8 Section 12 35 53 - Laboratory Casework

1.3 REFERENCES

1.3.1 American Architectural Metals Association (AAMA):1.3.1.1 AAMA 611: Voluntary Specification for Anodized Architectural Aluminum.

1.3.2 ASTM International (ASTM):1.3.2.1 ASTM A 792/A 792M: Standard Specification for Steel Sheet, 55% Aluminum-

Zinc Alloy-Coated by the Hot-Dip Process.1.3.2.2 ASTM B 209: Standard Specification for Aluminum and Aluminum-Alloy Sheet

and Plate.1.3.2.3 ASTM E 84: Standard Test Method for Surface Burning Characteristics of

Building Materials.1.3.2.4 ASTM E 162: Standard Test Method for Surface Flammability of Materials Using

a Radiant Heat Energy Source.1.3.2.5 ASTM E 662: Standard Test Method for Specific Optical Density of Smoke

Generated by Solid Materials.

1.3.3 Architectural Woodwork Institute (AWI):1.3.3.1 AWS: Architectural Woodwork Standards.

1.3.4 Commercial Item Description (CID):1.3.4.1 CID A-A-1936A: Adhesive, Contact, Neoprene Rubber.

1.3.5 Forest Stewardship Council (FSC):

1.3.6 International Maritime Organization (IMO):1.3.6.1 IMO FTP: International Code for Application of Fire Test Procedures.1.3.6.2 IMO FTP Code Part 2: Smoke and Density Test.1.3.6.3 IMO FTP Code Part 5: Test for Surface Flammability.

1.3.7 International Organization for Standardization (ISO):1.3.7.1 ISO 4586: High Pressure Decorative Laminates.1.3.7.2 ISO 9001: Quality Management Systems.1.3.7.3 ISO 14001: Environmental Management Systems.

1.3.8 Kitchen Cabinet Manufacturers Association (KCMA):1.3.8.1 KCMA A161.1: Performance & Construction Standard for Kitchen and Vanity

Cabinets.

1.3.9 Leadership in Energy and Environmental Design (LEED):

1.3.10 National Electrical Manufacturers Association (NEMA):1.3.10.1 NEMA LD-3: High Pressure Decorative Laminates.

1.3.11 Fire National Fire Protection Association (NFPA):1.3.11.1 NFPA 101: Life Safety Code.

1.3.12 National Science Foundation (NSF):1.3.12.1 NSF 35: High Pressure Decorative Laminates for Surfacing Food Service

Equipment.1.3.12.2 NSF 51: Food Equipment Materials.

06 40 23.10-2

1.3.13 Occupational Health and Safety Assessment Series (OHSAS):1.3.13.1 OHSAS 18001: Occupational Health and Safety Management Systems.

1.3.14 Southern California Air Quality Management District (SCAQMD):1.3.14.1 SCAQMD Rule 1168: Adhesive and Sealant Applications.

1.3.15 SCS Global Services (SCS):1.3.15.1 UL 723: Test for Surface Burning Characteristics of Building Materials.1.3.15.2 UL 2818: GREENGUARD Certification Program for Chemical Emissions for

Building Materials, Finishes and Furnishings.

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 Product Data: Submit the following:1.4.2.1 Product data for each specified product. Include manufacturer's technical data

sheets and published instruction instructions.1.4.2.2 Safety Data Sheets (SDS).

1.4.3 Shop Drawings: Fully dimensioned shop drawings showing layouts and components, including edge conditions, joinery, terminating conditions, substrate construction, and cutouts and holes. Include elevations, section details, and large scale details. Indicate color, pattern, and finish selections.

1.4.4 Quality Assurance Submittals:1.4.4.1 Test Reports: Certified test reports showing compliance with specified

performance characteristics and physical properties, if required.1.4.4.2 LEED Submittals: Applicable LEED documentation for potential credits specified

in this Section.1.4.4.3 GREENGUARD Children & Schools.1.4.4.4 GREENGUARD Indoor Air Quality.

1.4.5 Maintenance Data: Manufacturer's published maintenance manual with closeout submittals.

1.4.6 Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

1.4.7 Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square representing actual product, color, and patterns.

1.5 QUALITY ASSURANCE

1.5.1 Manufacturer Qualifications: Manufacturer producing products in an ISO 9001, ISO 14001, and OHSAS 18001 certified facility.

1.5.2 Fabricator Qualifications: Minimum of three years documented experience in fabricating decorative plastic laminates similar in scope and complexity of this Project.

1.5.3 Installer Qualifications: Minimum of three years documented installation experience for projects similar in scope and complexity to this Project.1.5.3.1 Installer shall be the fabricator.

1.5.4 Adhesives, Sealants, and Sealant Primers:1.5.4.1 SCAQMD (South Coast Air Quality Management District) Rule 1168 for VOC

content.1.5.4.2 Ozone Transport Commission (OTC) model Rule for Adhesives and Sealants.

06 40 23.10-3

1.5.5 LEED 2009 rating system potential credits for plastic laminate:1.5.5.1 Comply with LEED-NC.1.5.5.2 Comply with LEED-CI.1.5.5.3 Comply with MR Credit 4 - Recycled Content.1.5.5.4 Comply with MR Credit 5 - Regional Materials.1.5.5.5 Comply with MR Credit 6 - Rapidly Renewable Content.1.5.5.6 Comply with MR Credit 7 - Certified Wood.1.5.5.7 Comply with IEQ Credit 4.4 - Low-Emitting Materials - Composite Wood and

Agrifiber Products.1.5.5.8 Comply with LEED-CI IEQ Credit 4.5 - Low-Emitting Materials, Systems

Furniture and Seating.

1.5.6 LEED 2009 rating system potential credits for adhesives:1.5.6.1 Comply with LEED-NC.1.5.6.2 Comply with LEED-CI.1.5.6.3 Comply with IEQ Credit 3.2 - Construction Indoor Air Quality Management Plan -

Before Occupancy.1.5.6.4 Comply with IEQ Credit 4.1- Low Emitting Materials - Adhesives and Sealants.1.5.6.5 Comply with IEQ Credit 4.4 Low-Emitting Materials - Composite Wood and

Agrifiber Products.1.5.6.6 Comply with LEED-CI IEQ Credit 4.5 - Low-Emitting Materials, Systems

Furniture and Seating.

1.5.7 Certification:1.5.7.1 GREENGUARD Children & Schools Certified.1.5.7.2 GREENGUARD Indoor Air Quality Certified.

1.5.8 Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.1.5.8.1 Finish areas designated by Architect.1.5.8.2 Do not proceed with remaining work until workmanship is approved by Architect.1.5.8.3 Refinish mock-up area as required to produce acceptable work.1.5.8.4 Maintain mock-up during construction for fabrication and installation comparison.

If required, remove and legally dispose of mock-up when no longer required.1.5.8.5 Incorporation: If permitted by Architect, mock-up may be incorporated into as

part of the completed Work.

1.6 PRE-INSTALLATION MEETINGS

1.6.1 Convene minimum two weeks prior to starting work of this section.

1.7 DELIVERY, STORAGE, AND HANDLING

1.7.1 Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.

1.7.2 Storage and Protection: Store plastic laminate materials protected from exposure to harmful weather conditions, at temperature and humidity conditions recommended by manufacturer. Store sheet materials flat on pallets or similar rack-type storage to preclude damage.

1.7.3 Handling: Handle materials to avoid damage.

1.8 PROJECT CONDITIONS

1.8.1 Environmental Requirements: Ensure appropriate acclimatization between plastic laminate and substrate prior to fabrication. Condition plastic laminate and substrate surfaces in the same environment for 48 hours prior to fabrication. Condition at approximately 75 degree F

06 40 23.10-4

(24 degree C) and 45 percent to 55 percent relative humidity.1.8.1.1 Adhesive: For best results, apply adhesives at temperatures at or above 65

degree F (18 degree C).

1.8.2 Field Measurements: Verify actual measurements and openings by field measurements before fabrication; show recorded measurements on shop drawings. Coordinate field measurements and fabrication schedule with construction progress to avoid construction delays.

1.8.3 Preconditioning: Acclimatize decorative metals, adhesives, and substrates to receive the work for a minimum of 48 hours prior to fabrication unless a greater time period is required by the substrate material manufacturer. Precondition to occupancy conditions, except maximum temperature not to exceed 75 degree F (24 degree C) and relative humidity not to exceed 50 percent.

1.9 SEQUENCING

1.9.1 Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Wilsonart; 2501 Wilsonart Drive, Temple Texas 76504. ASD. Toll Free Tel (800) 433-3222. Tel: (254) 207-7000. Fax: (254) 207-2545. Email: _____. Web: http://www.wilsonart.com.

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 DECORATIVE PLASTIC LAMINATE PROPERTIES

2.2.1 Laminate Composition: Decorative surface papers impregnated with melamine resins and pressed over kraft paper core sheets impregnated with phenolic resin. Sheets then bonded together under pressures greater than 1,000 lbs. per sq. in. and high temperatures approaching 300 degree F (149 degree C). Finished sheets trimmed and backs sanded to facilitate bonding to substrate.

2.2.2 Sustainable Design Conformance Standards:2.2.2.1 UL 2818 GREENGUARD Gold Certified.2.2.2.2 SCS Certified Indoor Air Quality Advantage Gold Certified.2.2.2.3 SCS Chain of Custody Certified for FSC Mix, FSC Controlled Wood.2.2.2.4 SCS Recycled Content Certified.

2.2.3 Surface Burning Characteristics:2.2.3.1 Test Standards: ASTM E 84, ASTM E 162, ASTM E 662, IMO FTP Code Part 2

and Part 5, and UL 723.2.2.3.2 Interior Finish Classification, Fire-Rated Laminate: Class A according to NFPA

101. Flame spread less than 25 and Smoke Developed less than 450.

2.2.4 Surfaces Subject to Food Contact: Comply with NSF Standard 35.

2.3 STANDARD DECORATIVE LAMINATES

2.3.1 Product: "Wilsonart Laminate."

06 40 23.10-5

2.3.2 Enhanced Laminate Performance: Fabricate laminate with AEON Enhanced Performance Technology for increased surface wear resistance and surface abrasion.

2.3.3 General Purpose Laminate Product: "Wilsonart Type 107."2.3.3.1 Sheet Thickness: 0.048 inch (1.2 mm) nominal.2.3.3.2 Laminate Conformance Standard: NEMA LD 3, Grade HGS.2.3.3.3 Laminate Conformance Standard: ISO 4586, Grade HGS.2.3.3.4 Color, Pattern, and Finish:2.3.3.5 Color, Pattern, and Finish: Indicated on Drawings.2.3.3.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.3.4 Vertical Surface Laminate Product: "Wilsonart Type 335."2.3.4.1 Sheet Thickness: 0.028 inch (0.7 mm) nominal.2.3.4.2 Laminate Conformance Standard: NEMA LD 3, Grades VGS and VGP.2.3.4.3 Laminate Conformance Standard: ISO 4586, Grades VGS and VGP.2.3.4.4 Color, Pattern, and Finish:2.3.4.5 Color, Pattern, and Finish: Indicated on Drawings.2.3.4.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.3.5 Postforming Laminate Product: "Wilsonart Type 350."2.3.5.1 Sheet Thickness: 0.039 inch (1.0 mm) nominal.2.3.5.2 Laminate Conformance Standard: NEMA LD 3, Grade HGP.2.3.5.3 Laminate Conformance Standard: ISO 4586, Grade HGP.2.3.5.4 Color, Pattern, and Finish:2.3.5.5 Color, Pattern, and Finish: Indicated on Drawings.2.3.5.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.4 HIGH DEFINITION LAMINATES

2.4.1 Product: "Wilsonart HD High Definition Laminate, Type 376."

2.4.2 Enhanced Laminate Performance: Fabricate laminate with AEON Enhanced Performance Technology for increased surface wear resistance and surface abrasion.

2.4.3 Sheet Thickness: 0.039 inch (1.0 mm) nominal.

2.4.4 Laminate Conformance Standard: NEMA LD 3, Grade HGP.

2.4.5 Laminate Conformance Standard: ISO 4586, Grade HGP.

2.4.6 Finish: Mirage -35.

2.4.7 Finish: Facet -45.

2.4.8 Finish: Glaze -55.

2.4.9 Color and Pattern:

2.4.10 Color and Pattern: Indicated on Drawings.

2.4.11 Color and Pattern: Selected from manufacturer's full range of available selections.

2.5 SOLICOR LAMINATES

2.5.1 Product: "Wilsonart Solicor Laminate, Type 160." Color through the core.

06 40 23.10-6

2.5.2 Sheet Thickness: 0.048 inch (1.2 mm) nominal.

2.5.3 Laminate Conformance Standard: NEMA LD 3.

2.5.4 Laminate Conformance Standard: ISO 4586.

2.5.5 Color, Pattern, and Finish: D354 Designer White, Matte Finish -60.

2.5.6 Color, Pattern, and Finish: D354 Designer White, High Gloss Finish -01.

2.5.7 Color, Pattern, and Finish: D427 Linen, Matte Finish -60.

2.5.8 Color, Pattern, and Finish: D427 Linen, High Gloss Finish -01.

2.5.9 Color, Pattern, and Finish: 4925 Calcutta Marble, Fine Velvet Texture Finish -38.

2.6 x YOU (WxY) LAMINATES

2.6.1 Product: "Wilsonart x You Laminate."

2.6.2 Enhanced Laminate Performance: Laminate with AEON Enhanced Performance Technology for increased surface wear resistance and surface abrasion performance.

2.6.3 General Purpose:2.6.3.1 Type: Silk-Screen Process - "Wilsonart Type 173".2.6.3.2 Type: Graphic Image Process - "Wilsonart Type 174".2.6.3.3 Sheet Thickness: 0.048 inch (1.2 mm) nominal.2.6.3.4 Laminate Conformance Standard: NEMA LD 3, Grade HGS.2.6.3.5 Laminate Conformance Standard: ISO 4586, Grade HGS.2.6.3.6 Color, Pattern, and Finish:2.6.3.7 Color, Pattern, and Finish: Indicated on Drawings.2.6.3.8 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.6.4 Vertical Surface:2.6.4.1 Type: Silk-Screen Process - "Wilsonart Type 363".2.6.4.2 Type: Graphic Image Process - "Wilsonart Type 364".2.6.4.3 Sheet Thickness: 0.028 inch (0.7 mm) nominal.2.6.4.4 Laminate Conformance Standard: NEMA LD 3, Grade VGP.2.6.4.5 Laminate Conformance Standard: ISO 4586, Grade VGP.2.6.4.6 Color, Pattern, and Finish:2.6.4.7 Color, Pattern, and Finish: Indicated on Drawings.2.6.4.8 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.6.5 Postforming Type: "Wilsonart Type 374".2.6.5.1 Sheet Thickness: 0.039 inch (1.0 mm) nominal.2.6.5.2 Laminate Conformance Standard: NEMA LD 3, Grade HGP.2.6.5.3 Laminate Conformance Standard: ISO 4586, Grade HGP.2.6.5.4 Color, Pattern, and Finish:2.6.5.5 Color, Pattern, and Finish: Indicated on Drawings.2.6.5.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.7 VIRTUAL DESIGN LIBRARY (VDL) LAMINATES

2.7.1 Product: "Wilsonart Virtual Design Library Laminate."

06 40 23.10-7

2.7.2 Enhanced Laminate Performance: Laminate with AEON Enhanced Performance Technology for increased surface wear resistance and surface abrasion performance.

2.7.3 Vertical Surface:2.7.3.1 Type: "Wilsonart Type 362".2.7.3.2 Type: "Wilsonart Type 367".2.7.3.3 Sheet Thickness: 0.028 inch (0.7 mm) nominal.2.7.3.4 Laminate Conformance Standard: NEMA LD 3, Grade VGP.2.7.3.5 Laminate Conformance Standard: ISO 4586, Grade VGP.2.7.3.6 Color, Pattern, and Finish:2.7.3.7 Color, Pattern, and Finish: Indicated on Drawings.2.7.3.8 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.7.4 Postforming:2.7.4.1 Type: "Wilsonart Type 372".2.7.4.2 Type: "Wilsonart Type 377".2.7.4.3 Sheet Thickness: 0.039 inch (1.0 mm) nominal.2.7.4.4 Laminate Conformance Standard: NEMA LD 3, Grade HGP.2.7.4.5 Laminate Conformance Standard: ISO 4586, Grade HGP.2.7.4.6 Color, Pattern, and Finish:2.7.4.7 Color, Pattern, and Finish: Indicated on Drawings.2.7.4.8 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.8 MARKERBOARD AND CHALKBOARD LAMINATES

2.8.1 Markerboard Product: Wilsonart Markerboard Laminate.

2.8.2 Markerboard Laminate - Horizontal Grade Type: "Wilsonart Type 136."2.8.2.1 Sheet Thickness: 0.048 inch (1.2 mm) nominal.2.8.2.2 Conformance Standard: NEMA LD 3, Grade HGS.2.8.2.3 Conformance Standard: ISO 4586, Grade HGS.2.8.2.4 Color and Finish: 1572, Antique White, Gloss -09 Finish.2.8.2.5 Color and Finish: 1573, Frosty White, Gloss -09 Finish.2.8.2.6 Color and Finish: 1595, Black, Gloss -09 Finish.2.8.2.7 Colors: Indicated on Drawings.2.8.2.8 Colors: Selected from manufacturer's full range of available selections.

2.8.3 Chalkboard Product: Wilsonart Chalkboard Laminate.

2.8.4 Chalkboard Laminate - Horizontal Grade Type: "Wilsonart Type 137."

2.8.5 Sheet Thickness: 0.048 inch (1.2 mm) nominal.2.8.5.1 Conformance Standard: NEMA LD 3, Grade HGS.2.8.5.2 Conformance Standard: ISO 4586, Grade HGS.2.8.5.3 Color and Finish: 4623, Graphite Nebula, Fine Velvet Textured Finish -38.

2.9 FIRE-RATED DECORATIVE LAMINATES

2.9.1 Product: "Wilsonart Fire-Rated Laminate." Manufactured with a fire-retardant-treated kraft phenolic core. Class A rated according to NFPA 101.

2.9.2 General Purpose Type: "Wilsonart Type 604."2.9.2.1 Sheet Thickness: 0.032 inch (0.8 mm) nominal.2.9.2.2 Laminate Conformance Standard: NEMA LD 3, Grade VGF.2.9.2.3 Laminate Conformance Standard: ISO 4586, Grade VGF.

06 40 23.10-8

2.9.2.4 Color, Pattern, and Finish:2.9.2.5 Color, Pattern, and Finish: Indicated on Drawings.2.9.2.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.9.3 General Purpose Type: "Wilsonart Type 605."2.9.3.1 Sheet Thickness: 0.048 inch (1.2 mm) nominal.2.9.3.2 Laminate Conformance Standard: NEMA LD 3, Grade HGF.2.9.3.3 Laminate Conformance Standard: ISO 4586, Grade HGF.2.9.3.4 Color, Pattern, and Finish:2.9.3.5 Color, Pattern, and Finish: Indicated on Drawings.2.9.3.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.9.4 General Purpose Type: "Wilsonart Type 607."2.9.4.1 Sheet Thickness: 0.059 inch (1.5 mm) nominal.2.9.4.2 Laminate Conformance Standard: NEMA LD 3, Grade SGF.2.9.4.3 Laminate Conformance Standard: ISO 4586, Grade SGF.2.9.4.4 Color, Pattern, and Finish:2.9.4.5 Color, Pattern, and Finish: Indicated on Drawings.2.9.4.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.10 COMPACT LAMINATES

2.10.1 Product: "Wilsonart Compact Laminate."

2.10.2 "Wilsonart Classic Grade": Self-supporting homogenous panels finished with melamine surface. Impact-resistant design.2.10.2.1 Product Type and Nominal Thickness: Type 114; 0.100 inch (2.5 mm).2.10.2.2 Product Type and Nominal Thickness: Type 514; 0.100 inch (2.5 mm).2.10.2.3 Product Type and Nominal Thickness: Type 117; 0.118 inch (3.0 mm).2.10.2.4 Product Type and Nominal Thickness: Type 515; 0.125 inch (3.2 mm).2.10.2.5 Product Type and Nominal Thickness: Type 569; 0.250 inch (6.4 mm).2.10.2.6 Product Type and Nominal Thickness: Type 571; 0.312 inch (7.9 mm).2.10.2.7 Product Type and Nominal Thickness: Type 572; 0.375 inch (9.5 mm).2.10.2.8 Product Type and Nominal Thickness: Type 568; 0.500 inch (12.7 mm).2.10.2.9 Product Type and Nominal Thickness: Type 575; 0.750 inch (19 mm).2.10.2.10 Product Type and Nominal Thickness: Type 590; 1.00 inch (2.5 mm).2.10.2.11 Laminate Conformance Standard: NEMA LD 3, Grade CGS.2.10.2.12 Laminate Conformance Standard: ISO 4586, Grade CGS.2.10.2.13 Finish: Matte -60.2.10.2.14 Color and Pattern:2.10.2.15 Color and Pattern: Indicated on Drawings.2.10.2.16 Color and Pattern: Selected from manufacturer's full range of available

selections.

2.10.3 "Wilsonart Fire-Rated Grade": For applications where fire-rated properties are required. Double-faced. Class A rated according to NFPA 101.2.10.3.1 Product Type and Nominal Thickness: Type 669; 0.250 inch (6.4 mm).2.10.3.2 Product Type and Nominal Thickness: Type 671; 0.312 inch (7.9 mm).2.10.3.3 Product Type and Nominal Thickness: Type 672; 0.375 inch (9.5 mm).2.10.3.4 Product Type and Nominal Thickness: Type 668; 0.500 inch (12.7 mm).2.10.3.5 Product Type and Nominal Thickness: Type 675; 0.500 inch (12.7 mm).2.10.3.6 Product Type and Nominal Thickness: Type 690; 1.00 inch (2.5 mm).2.10.3.7 Laminate Conformance Standard: NEMA LD 3, Grade CGS.2.10.3.8 Laminate Conformance Standard: ISO 4586, Grade CGS.

06 40 23.10-9

2.10.3.9 Finish: Matte -60.2.10.3.10 Color and Pattern:2.10.3.11 Color and Pattern: Indicated on Drawings.2.10.3.12 Color and Pattern: Selected from manufacturer's full range of available

selections.

2.10.4 "Wilsonart Laboratory Grade": For applications requiring high degree of chemical and stain resistance. Double-faced.2.10.4.1 Product Type and Nominal Thickness: 569-95; 0.250 inch (6.4 mm).2.10.4.2 Product Type and Nominal Thickness: 571-95; 0.312 inch (7.9 mm).2.10.4.3 Product Type and Nominal Thickness: 572-95; 0.375 inch (9.5 mm).2.10.4.4 Product Type and Nominal Thickness: 568-95; 0.500 inch (12.7 mm).2.10.4.5 Product Type and Nominal Thickness: 575-95; 0.750 inch (19 mm).2.10.4.6 Product Type and Nominal Thickness: 590-95; 1.00 inch (2.5 mm).2.10.4.7 Laminate Conformance Standard: NEMA LD 3, Grade CGS.2.10.4.8 Laminate Conformance Standard: ISO 4586, Grade CGS.2.10.4.9 Finish: Matte -95.2.10.4.10 Color and Pattern:2.10.4.11 Color and Pattern: Indicated on Drawings.2.10.4.12 Color and Pattern: Selected from manufacturer's full range of available

selections.

2.11 CHEMICAL-RESISTANT DECORATIVE LAMINATES

2.11.1 Product: "Wilsonart Chemsurf Chemical-Resistant Laminate."

2.11.2 Post-Forming Type: "Wilsonart Type 390".2.11.2.1 Sheet thickness: 0.034 inch (0.86 mm) nominal.2.11.2.2 Color, Pattern, and Finish:2.11.2.3 Color, Pattern, and Finish: Indicated on Drawings.2.11.2.4 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.12 HIGH WEAR DECORATIVE LAMINATES

2.12.1 Product: "Wilsonart High Wear Laminate."

2.12.2 General Purpose Laminate: "Wilsonart Type 107HW."2.12.2.1 Sheet Thickness: 0.048 inch (1.2 mm) nominal.2.12.2.2 Laminate Conformance Standard: NEMA LD 3, Grade HGS.2.12.2.3 Laminate Conformance Standard: ISO 4586, Grade HGS.2.12.2.4 Color, Pattern, and Finish:2.12.2.5 Color, Pattern, and Finish: Indicated on Drawings.2.12.2.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.12.3 Vertical Surface Laminate: "Wilsonart Type 335HW."2.12.3.1 Sheet Thickness: 0.028 inch (0.7 mm) nominal.2.12.3.2 Laminate Conformance Standard: NEMA LD 3, Grades VGS and VGP.2.12.3.3 Laminate Conformance Standard: ISO 4586, Grades VGS and VGP.2.12.3.4 Color, Pattern, and Finish:2.12.3.5 Color, Pattern, and Finish: Indicated on Drawings.2.12.3.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.12.4 Postforming Laminate: "Wilsonart Type 350HW."2.12.4.1 Sheet Thickness: 0.039 inch (1.0 mm) nominal.

06 40 23.10-10

2.12.4.2 Laminate Conformance Standard: NEMA LD 3, Grade HGP.2.12.4.3 Laminate Conformance Standard: ISO 4586, Grade HGP.2.12.4.4 Color, Pattern, and Finish:2.12.4.5 Color, Pattern, and Finish: Indicated on Drawings.2.12.4.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.13 CABINET LINERS

2.13.1 Product: "Wilsonart Cabinet Liner Sheets."

2.13.2 Cabinet Liner Laminate: "Wilsonart Type 101."2.13.2.1 Sheet Thickness: 0.020 inch (0.51 mm) nominal.2.13.2.2 Laminate Conformance Standard: NEMA LD 3, Grade CLS.2.13.2.3 Laminate Conformance Standard: ISO 4586, Grade CLS.2.13.2.4 Color, Pattern, and Finish:2.13.2.5 Color, Pattern, and Finish: Indicated on Drawings.2.13.2.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.13.3 Cabinet Liner Laminate: "Wilsonart Type 184."2.13.3.1 Sheet Thickness: 0.024 inch (0.61 mm) nominal.2.13.3.2 Laminate Conformance Standard: NEMA LD 3, Grade CLS.2.13.3.3 Laminate Conformance Standard: ISO 4586, Grade CLS.2.13.3.4 Color, Pattern, and Finish:2.13.3.5 Color, Pattern, and Finish: Indicated on Drawings.2.13.3.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.14 PHENOLIC BACKER SHEETS

2.14.1 Product: "Wilsonart Phenolic Backer Sheets."2.14.1.1 Sheet Thickness: ___ inch nominal.2.14.1.2 Laminate Conformance Standard: NEMA LD 3.2.14.1.3 Laminate Conformance Standard: ISO 4586.2.14.1.4 Color, Pattern, and Finish: ____.2.14.1.5 Color, Pattern, and Finish: Indicated on Drawings.2.14.1.6 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.14.2 Fire-Rated Backer Sheet: "Wilsonart Type 264-FR." Use in conjunction with "Wilsonart Type 604 Fire-Rated Laminate." Class A rated according to NFPA 101.2.14.2.1 Sheet Thickness: 0.030 inch (0.76 mm) nominal.2.14.2.2 Laminate Conformance Standard: NEMA LD 3, Grade BKV.2.14.2.3 Laminate Conformance Standard: ISO 4586, Grade BKV.2.14.2.4 Color: Brown (natural color).

2.14.3 Fire-Rated Backer Sheet: "Wilsonart Type 266-FR."2.14.3.1 Application: Use in conjunction with "Wilsonart Type 605 Fire-Rated Laminate"

and "Wilsonart Type 607 Fire-Rated Laminate". Class A rated according to NFPA 101.

2.14.3.2 Sheet Thickness: 0.050 inch (1.27 mm) nominal.2.14.3.3 Laminate Conformance Standard: NEMA LD 3, Grade BKH.2.14.3.4 Laminate Conformance Standard: ISO 4586, Grade BKH.2.14.3.5 Color: Brown (natural color).

2.15 DECORATIVE EDGES AND EDGEBANDS

06 40 23.10-11

2.15.1 Decorative Edge Products: "Wilsonart Decorative Edges."2.15.1.1 Beveled Edge, FE Profile.2.15.1.2 Cascade Edge, FE Profile.2.15.1.3 Crescent Edge, FE Profile.2.15.1.4 Beveled Edge, SE Profile.2.15.1.5 Cascade Edge, SE Profile.2.15.1.6 Crescent Edge, SE Profile.2.15.1.7 Color, Pattern, and Finish:2.15.1.8 Color, Pattern, and Finish: Indicated on Drawings.2.15.1.9 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.15.2 Edgeband Products: "Wilsonart Edgeband."2.15.2.1 Composition: ABS/PVC extruded fabrication.2.15.2.2 Width: 15/16 inch (23.8 mm).2.15.2.3 Width: 1-5/16 inches (33.3 mm).2.15.2.4 Thickness: Refer to Tech Data Sheet.2.15.2.5 Color, Pattern, and Finish:2.15.2.6 Color, Pattern, and Finish: Indicated on Drawings.2.15.2.7 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.16 DECORATIVE PLASTIC LAMINATE RESURFACING

2.16.1 Vertical Surface Laminates:

2.16.2 Product: "Wilsonart RE-COVER Laminate Type 735."2.16.2.1 Sheet Thickness: 0.032 inch (0.81 mm) nominal.2.16.2.2 Sheet Width: 36 inches (914 mm).2.16.2.3 Sheet Width: 48 inches (1219 mm).2.16.2.4 Sheet Width: 60 inches (1524 mm).2.16.2.5 Laminate Conformance Standard: NEMA LD 3, Grade VGS.2.16.2.6 Laminate Conformance Standard: ISO 4586, Grade VGS.2.16.2.7 Applications: Vertical surfaces only. Radiused applications require a minimum

radius of 7 inches (178 mm) is required.2.16.2.8 Edging: Self-edged.2.16.2.9 Color, Pattern, and Finish:2.16.2.10 Color, Pattern, and Finish: Indicated on Drawings.2.16.2.11 Color, Pattern, and Finish: Selected from manufacturer's full range of available

selections.

2.16.3 Product: "Wilsonart RE-COVER Chalkboard Type 737."2.16.3.1 Sheet Thickness: 0.049 inch (1.24 mm).2.16.3.2 Sheet Width: 48 inches (1219 mm).2.16.3.3 Total Weight: 0.371 lbs. per sq. ft.2.16.3.4 Finish Conformance Standard: AAMA 611, AA-M12C22A42/A44, Class I.2.16.3.5 Color: Graphite Nebula.2.16.3.6 Color: Indicated on Drawings.2.16.3.7 Color: Selected from manufacturer's standard offerings.

2.16.4 Product: "Wilsonart RE-COVER Decorative Metals Type 480."2.16.4.1 Decorative Metal Series: Type 415/419, Metro Collection and Color Anodized.2.16.4.2 Sheet Thickness: 0.035 inch (0.89 mm).2.16.4.3 Sheet Width: 48 inches (1219 mm).2.16.4.4 Total Weight: 0.402 lbs. per sq. ft.2.16.4.5 Finish Conformance Standard: AAMA 611, AA-M12C22A42/A44, Class I.2.16.4.6 Color: Matte Pewter.

06 40 23.10-12

2.16.4.7 Color: Matte Grey Bronze.2.16.4.8 Color: Matte Gunmetal Grey.2.16.4.9 Color: Oiled Bronze.2.16.4.10 Color: Satin White Bronze.2.16.4.11 Color: Satin Brushed Nickel.2.16.4.12 Color: Matte Natural Aluminum.2.16.4.13 Color: Brite Brushed Natural Aluminum.2.16.4.14 Color: Satin Brushed Natural Aluminum.2.16.4.15 Color: Alumasteel.2.16.4.16 Color: Satin Brushed Smoke Aluminum.2.16.4.17 Color: Satin Brushed Gold Aluminum.2.16.4.18 Color: Satin Brushed Copper Aluminum.2.16.4.19 Color: Satin Brushed Black Aluminum.2.16.4.20 Color: Satin Brushed Lite Bronze Aluminum.2.16.4.21 Color: Satin Brushed Medium Bronze Aluminum.2.16.4.22 Color: Indicated on Drawings.2.16.4.23 Color: Selected from manufacturer's standard offerings.

2.17 ACCESSORY MATERIALS

2.17.1 Substrate Repair Materials: Following products are acceptable for repairing damaged high pressure decorative laminate or wood substrates:2.17.1.1 J-B Weld WoodWeld.2.17.1.2 Elmer's Carpenter's Wood Filler.2.17.1.3 Bondo All-Purpose Putty.

2.17.2 Substrate Cleaning Materials: Following products are acceptable; do not use a cleaner that will leave an oily residue and do not use to thin adhesive products:2.17.2.1 Wilsonart 110 Adhesive Solvent.2.17.2.2 Wilsonart 121 Adhesive Cleaner.2.17.2.3 Wilsonart 130 Low VOC Adhesive Solvent.2.17.2.4 Wilsonart 131 Adhesive Cleaner. OTC compliant.2.17.2.5 Wilsonart 131A Adhesive Cleaner Aerosol. OTC compliant.2.17.2.6 Windex with ammonia.2.17.2.7 Non-proprietary acetone, isopropyl alcohol, or denatured alcohol cleaning

material.

2.17.3 Self-Edging Adhesive: Wilsonart 30 PVA Yellow Wood Glue.

2.17.4 Contact Adhesive:2.17.4.1 Product: "Wilsonart 1730/1731 Low VOC Contact Adhesive."2.17.4.2 Description: High solids, low VOC contact adhesive for non-postforming

applications.

2.17.5 Contact Adhesive, Water-Based:2.17.5.1 Product: "Wilsonart H20."2.17.5.2 Description: Non-flammable low VOC water-based contact adhesive for

postforming applications.

2.17.6 Polyvinyl Acetate (PVA) Adhesive:2.17.6.1 Product: "Wilsonart PVA Adhesive."2.17.6.2 Description: PVA-based adhesives for bonding decorative laminate to wood

substrates. Acceptable for cold press, hot press, and postforming applications.

2.18 DECORATIVE METAL LAMINATES

2.18.1 Basis of Design: Wilsonart.

06 40 23.10-13

2.18.2 Sheet Materials:2.18.2.1 Aluminum Sheet: ASTM B 209. Alloy and temper to suit decorative metal

applications.2.18.2.2 Galvalume Steel Sheet: ASTM A 792/A 792M.2.18.2.3 Metal Laminate Sheet: Colored metallic decorative layer pressed over kraft

paper core sheets impregnated with phenolic resin.

2.18.3 Conformance Standards:2.18.3.1 Surface Burning Characteristics: Unless otherwise specified, decorative metal

fabrications comply with ASTM E 84 for the Class rating indicated under each decorative metal type listed in Part 2 of this Specification Section. The following values apply:

2.18.3.1.1 Class A-I Rated:2.18.3.1.1.1 Flame spread index, 0-25.2.18.3.1.1.2 Smoke-developed index, 0-450.

2.18.3.1.2 Class B-II Rated:2.18.3.1.2.1 Flame spread index, 26-75.2.18.3.1.2.2 Smoke-developed index, 0-450.

2.18.3.2 UL 2818:2.18.3.2.1 GREENGUARD - Emission levels in UL 2818, Section 7.1 are applicable

for furniture products.2.18.3.2.2 GREENGUARD Gold - Emission levels in UL 2818, Section 7.2 are

applicable for building materials, finishes, and furnishings.

2.18.4 Type 408, Metal Laminates: Metal laminate sheet.2.18.4.1 Design: L6441.

2.18.4.1.1 Sheet Thickness: 0.032 inch (0.8 mm).2.18.4.1.2 Sheet Weight: 0.27 lbs. per sq. ft.2.18.4.1.3 Surface Burning Characteristics: Class A-I rated.2.18.4.1.4 Color: Brite Brushed Sterling.2.18.4.1.5 Color: Satin Brushed Palladium.2.18.4.1.6 Color: Satin Brushed Penny.2.18.4.1.7 Color: Ribboned Brite Brushed Sterling.2.18.4.1.8 Color: Ribboned Satin Brushed Palladium.2.18.4.1.9 Color: Ribboned Satin Brushed Penny.2.18.4.1.10 Color: Ribboned Satin Brushed Aged Gold.2.18.4.1.11 Color: Ribboned Matte Silver.2.18.4.1.12 Color: Indicated on Drawings.2.18.4.1.13 Color: Selected from manufacturer's standard offerings.

2.18.4.2 Design: L6442.2.18.4.2.1 Sheet Thickness: 0.032 inch (0.8 mm).2.18.4.2.2 Sheet Weight: 0.27 lbs. per sq. ft.2.18.4.2.3 Surface Burning Characteristics: Class A-I rated.2.18.4.2.4 Color: Brite Brushed Sterling.2.18.4.2.5 Color: Satin Brushed Palladium.2.18.4.2.6 Color: Satin Brushed Penny.2.18.4.2.7 Color: Ribboned Brite Brushed Sterling.2.18.4.2.8 Color: Ribboned Satin Brushed Palladium.2.18.4.2.9 Color: Ribboned Satin Brushed Penny.2.18.4.2.10 Color: Ribboned Satin Brushed Aged Gold.2.18.4.2.11 Color: Ribboned Matte Silver.2.18.4.2.12 Color: Indicated on Drawings.2.18.4.2.13 Color: Selected from manufacturer's standard offerings.

2.18.4.3 Design: L6443.2.18.4.3.1 Sheet Thickness: 0.032 inch (0.8 mm).2.18.4.3.2 Sheet Weight: 0.27 lbs. per sq. ft.

06 40 23.10-14

2.18.4.3.3 Surface Burning Characteristics: Class A-I rated.2.18.4.3.4 Color: Brite Brushed Sterling.2.18.4.3.5 Color: Satin Brushed Palladium.2.18.4.3.6 Color: Satin Brushed Penny.2.18.4.3.7 Color: Ribboned Brite Brushed Sterling.2.18.4.3.8 Color: Ribboned Satin Brushed Palladium.2.18.4.3.9 Color: Ribboned Satin Brushed Penny.2.18.4.3.10 Color: Ribboned Satin Brushed Aged Gold.2.18.4.3.11 Color: Ribboned Matte Silver.2.18.4.3.12 Color: Indicated on Drawings.2.18.4.3.13 Color: Selected from manufacturer's standard offerings.




2.18.4.7 Design: L6447.2.18.4.7.1 Sheet Thickness: 0.032 inch (0.8 mm).2.18.4.7.2 Sheet Weight: 0.27 lbs. per sq. ft.

06 40 23.10-15

2.18.4.7.3 Surface Burning Characteristics: Class A-I rated.2.18.4.7.4 Color: Brite Brushed Sterling.2.18.4.7.5 Color: Satin Brushed Palladium.2.18.4.7.6 Color: Satin Brushed Penny.2.18.4.7.7 Color: Ribboned Brite Brushed Sterling.2.18.4.7.8 Color: Ribboned Satin Brushed Palladium.2.18.4.7.9 Color: Ribboned Satin Brushed Penny.2.18.4.7.10 Color: Ribboned Satin Brushed Aged Gold.2.18.4.7.11 Color: Ribboned Matte Silver.2.18.4.7.12 Color: Indicated on Drawings.2.18.4.7.13 Color: Selected from manufacturer's standard offerings.


2.18.4.9 Design: L6452.2.18.4.9.1 Sheet Thickness: 0.032 inch (0.8 mm).2.18.4.9.2 Sheet Weight: 0.29 lbs. per sq. ft.2.18.4.9.3 Surface Burning Characteristics: Class A-I rated.2.18.4.9.4 Color: Vinyl Records.

2.18.4.10 Design: L6454.2.18.4.10.1 Sheet Thickness: 0.039 inch (1.0 mm).2.18.4.10.2 Sheet Weight: 0.35 lbs. per sq. ft.2.18.4.10.3 Surface Burning Characteristics: Class A-I rated.2.18.4.10.4 Color: Bronze Age.

2.18.4.11 Design: L6455.2.18.4.11.1 Sheet Thickness: 0.059 inch (1.5 mm).2.18.4.11.2 Sheet Weight: 0.54 lbs. per sq. ft.2.18.4.11.3 Surface Burning Characteristics: Class B-II rated.2.18.4.11.4 Color: Hot Tin Roof.

2.18.4.12 Design: L6449.2.18.4.12.1 Sheet Thickness: 0.035 inch (0.89 mm).2.18.4.12.2 Sheet Weight: 0.27 lbs. per sq. ft.2.18.4.12.3 Surface Burning Characteristics: Class A-I rated.2.18.4.12.4 Color: Sequin Brite Brushed Sterling.2.18.4.12.5 Color: Sequin Satin Brushed Palladium.2.18.4.12.6 Color: Indicated on Drawings.2.18.4.12.7 Color: Selected from manufacturer's standard offerings.

2.18.4.13 Design: L6451.2.18.4.13.1 Sheet Thickness: 0.035 inch (0.89 mm).2.18.4.13.2 Sheet Weight: 0.27 lbs. per sq. ft.2.18.4.13.3 Surface Burning Characteristics: Class A-I rated.2.18.4.13.4 Color: Sequin Brite Brushed Sterling.2.18.4.13.5 Color: Sequin Satin Brushed Palladium.2.18.4.13.6 Color: Indicated on Drawings.2.18.4.13.7 Color: Selected from manufacturer's standard offerings.

06 40 23.10-16

2.18.4.14 Design: L6453.2.18.4.14.1 Sheet Thickness: 0.047 inch (1.2 mm).2.18.4.14.2 Sheet Weight: 0.43 lbs. per sq. ft.2.18.4.14.3 Surface Burning Characteristics: Class B-II rated.2.18.4.14.4 Color: Rough Cut.

2.18.5 Type 414, Galvalume Steel: Steel sheet. Clear acrylic top coating, both sides. Protective film one side.2.18.5.1 Design: L6453.

2.18.5.1.1 Sheet Thickness: 0.019 inch (0.48 mm).2.18.5.1.2 Sheet Weight: 0.906 lbs. per sq. ft.2.18.5.1.3 Finish: Decorative faceted.2.18.5.1.4 Color: Crystal Steel.

2.18.6 Type 415, Metro Collection: Anodized aluminum sheet.2.18.6.1 Sheet Thickness: 0.025 inch 90.64 mm).2.18.6.2 Sheet Weight: 0.353 lbs. per sq. ft.2.18.6.3 Surface Burning Characteristics: Class A-I rated.2.18.6.4 Finish Conformance Standard: AAMA 611, AA-M12C22A42/A44, Class I.2.18.6.5 Color: Matte Pewter.2.18.6.6 Color: Matte Grey Bronze.2.18.6.7 Color: Matte Gunmetal Grey.2.18.6.8 Color: Indicated on Drawings.2.18.6.9 Color: Selected from manufacturer's standard offerings.

2.18.7 Type 418, Aluminum: Aluminum sheet bonded to a phenolic backer, and as follows:2.18.7.1 Type 418/415, Metro Collection: Anodized aluminum sheet bonded to a phenolic

backer.2.18.7.1.1 Application Limitations: For flat surfaces only.2.18.7.1.2 Sheet Thickness: 0.025 inch (0.64 mm).2.18.7.1.3 Overall Thickness: 0.040 inch (1.0 mm).2.18.7.1.4 Total Weight: 0.484 lbs. per sq. ft.2.18.7.1.5 Surface Burning Characteristics: Class A-I rated.2.18.7.1.6 Finish Conformance Standard: AAMA, AA-M12C22A42/A44, Class I.2.18.7.1.7 Color: Matte Pewter.2.18.7.1.8 Color: Matte Grey Bronze.2.18.7.1.9 Color: Matte Gunmetal Grey.2.18.7.1.10 Color: Indicated on Drawings.2.18.7.1.11 Color: Selected from manufacturer's standard offerings.

2.18.7.2 Type 418/419, Color Anodized: Aluminum sheet; color on exposed surface only. Bonded to a phenolic backer.

2.18.7.2.1 Application Limitations: For non-radiused flat surfaces.2.18.7.2.2 Sheet Thickness: 0.025 inch (0.64 mm).2.18.7.2.3 Overall Thickness: 0.040 inch (1.0 mm).2.18.7.2.4 Total Weight: 0.484 lbs. per sq. ft.2.18.7.2.5 Surface Burning Characteristics: Class A-I rated.2.18.7.2.6 Finish Conformance Standard: AAMA 611, AA-M12C22A42/A44, Class I.2.18.7.2.7 Color: Oiled Bronze.2.18.7.2.8 Color: Satin White Bronze.2.18.7.2.9 Color: Satin Brushed Nickel.2.18.7.2.10 Color: Matte Natural Aluminum.2.18.7.2.11 Color: Brite Brushed Natural Aluminum.2.18.7.2.12 Color: Satin Brushed Natural Aluminum.2.18.7.2.13 Color: Alumasteel.2.18.7.2.14 Color: Satin Brushed Smoke Aluminum.2.18.7.2.15 Color: Satin Brushed Gold Aluminum.

06 40 23.10-17

2.18.7.2.16 Color: Satin Brushed Copper Aluminum.2.18.7.2.17 Color: Satin Brushed Black Aluminum.2.18.7.2.18 Color: Satin Brushed Lite Bronze Aluminum.2.18.7.2.19 Color: Satin Brushed Medium Bronze Aluminum.2.18.7.2.20 Color: Polished Natural Aluminum.2.18.7.2.21 Color: Polished Gold Aluminum.2.18.7.2.22 Color: Indicated on Drawings.2.18.7.2.23 Color: Selected from manufacturer's standard offerings.

2.18.8 Type 419, Anodized Aluminum: Color anodized aluminum sheet; color on exposed surface only. Concealed side prepared to facilitate bonding to suitable substrates.2.18.8.1 Sheet Thickness: 0.025 inch (0.64 mm).2.18.8.2 Sheet Weight: 0.353 lbs. per sq. ft.2.18.8.3 Surface Burning Characteristics: Class A-I rated.2.18.8.4 Finish Conformance Standard: AAMA 611, AA-M12C22A42/A44, Class I.2.18.8.5 Food Service Applications: Complies with NSF/ANSI Standard 51 for splash

zones and FDA food contact requirements.2.18.8.6 Color: Oiled Bronze.2.18.8.7 Color: Satin White Bronze.2.18.8.8 Color: Satin Brushed Nickel.2.18.8.9 Color: Matte Natural Aluminum.2.18.8.10 Color: Brite Brushed Natural Aluminum.2.18.8.11 Color: Satin Brushed Natural Aluminum.2.18.8.12 Color: Alumasteel.2.18.8.13 Color: Satin Brushed Smoke Aluminum.2.18.8.14 Color: Satin Brushed Gold Aluminum.2.18.8.15 Color: Satin Brushed Copper Aluminum.2.18.8.16 Color: Satin Brushed Black Aluminum.2.18.8.17 Color: Satin Brushed Lite Bronze Aluminum.2.18.8.18 Color: Satin Brushed Medium Bronze Aluminum.2.18.8.19 Color: Polished Natural Aluminum.2.18.8.20 Color: Polished Gold Aluminum.2.18.8.21 Color: Indicated on Drawings.2.18.8.22 Color: Selected from manufacturer's standard offerings.

2.18.9 Type 480: Self-adhesive decorative metal for resurfacing over suitable existing substrates.2.18.9.1 Product: Wilsonart RE-COVER Decorative Metals Type 480.2.18.9.2 Decorative Metal Series: Type 415/419, Metro Collection and Color Anodized.2.18.9.3 Sheet Thickness: 0.035 inch (0.89 mm).2.18.9.4 Total Weight: 0.402 lbs. per sq. ft.2.18.9.5 Finish Conformance Standard: AAMA 611, AA-M12C22A42/A44, Class I.2.18.9.6 Color: Matte Pewter.2.18.9.7 Color: Matte Grey Bronze.2.18.9.8 Color: Matte Gunmetal Grey.2.18.9.9 Color: Oiled Bronze.2.18.9.10 Color: Satin White Bronze.2.18.9.11 Color: Satin Brushed Nickel.2.18.9.12 Color: Matte Natural Aluminum.2.18.9.13 Color: Brite Brushed Natural Aluminum.2.18.9.14 Color: Satin Brushed Natural Aluminum.2.18.9.15 Color: Alumasteel.2.18.9.16 Color: Satin Brushed Smoke Aluminum.2.18.9.17 Color: Satin Brushed Gold Aluminum.2.18.9.18 Color: Satin Brushed Copper Aluminum.2.18.9.19 Color: Satin Brushed Black Aluminum.

06 40 23.10-18

2.18.9.20 Color: Satin Brushed Lite Bronze Aluminum.2.18.9.21 Color: Satin Brushed Medium Bronze Aluminum.2.18.9.22 Color: Indicated on Drawings.2.18.9.23 Color: Selected from manufacturer's standard offerings.

2.18.10 Bonding Adhesive: Spray-grade contact adhesive for bonding decorative metal fabrications to substrate. Complies with CID A-A-1936A.2.18.10.1 Flatwork (Non-Postforming) Product: "Wilsonart 950/951 Contact Adhesive,

Flatwork Spray Grade."2.18.10.2 Postforming Product: "Wilsonart 800/801 Contact Adhesive, Postforming Spray

Grade."

2.18.11 Low-VOC Bonding Adhesive: Spray-grade contact adhesive for bonding decorative metal fabrications to substrate. Complies with SCAQMD Rule 1168.2.18.11.1 Flatwork (Non-Postforming) Product: "Wilsonart 1730/1731 Contact Adhesive,

California Compliant Bulk."

2.18.12 Bonding Adhesive Cleaner: Solvent-based adhesive cleaner. For removing residue and overspray resulting from product installation; not for us e on decorative metal surfaces. Use for Wilsonart 950/951 and Wilsonart 800/801 Contact Adhesives.2.18.12.1 Product: "Wilsonart 121 Adhesive Cleaner."

2.18.13 Low-VOC Bonding Adhesive Cleaner: Solvent-based adhesive cleaner. For removing residue and overspray resulting from product installation; not for us e on decorative metal surfac es. Use for Wilsonart 1730/1731 contact adhesives.2.18.13.1 Product: "Wilsonart 131 Low VOC Adhesive Cleaner."

2.18.14 Elastomeric Sealant: Mildew-resistant silicone sealant. Complies with ASTM C 920, Type S (single component), Grade NS (nonsag). Acceptable to FDA for installations subject to food contact.2.18.14.1 Product: Acceptable to decorative metals manufacturer.2.18.14.2 Color: Complementary to decorative metals color.2.18.14.3 Color: Clear.2.18.14.4 Color: As selected from sealant manufacturer's standard offerings.

2.18.15 Construction Adhesive: Decorative metals manufacturer's recommended silicone-based construction adhesive for backsplashes, endsplashes, and other applications according to manufacturer's published fabrication instructions.

2.18.16 Accessory Materials for Resurfacing Applications: Provide substrate repair materials and substrate cleaning materials acceptable to manufacturer.

2.18.17 Fabrication:2.18.17.1 General: Fabricate components in shop, to greatest extent practicable, in

profiles, sizes, and shapes indicated according to approved shop drawings and manufacturer's published fabrication requirements.

2.18.17.2 Conduct hemming, bending, roll forming, and similar assembly operations according to manufacturer's published fabrication requirements.

2.18.17.3 Use only cutting and fabrication tools acceptable to decorative metals manufacturer.

2.18.17.4 Provide holes and cutouts indicated on approved shop drawings.

2.19 CONTACT ADHESIVES

2.19.1 Non-postforming:2.19.1.1 1730/1731 Low VOC Contact Adhesive.2.19.1.2 730/731 Contact Adhesive, low VOC canister.

06 40 23.10-19

2.19.2 Postforming:2.19.2.1 H2O Contact Adhesive, water-based.

2.19.3 Water-resistant, non-staining bond for common High Pressure Laminate (HPL) applications.

2.19.4 Limitations: Avoid contact with copper. Avoid vinyl surfaces containing plasticizers.

2.20 COLD PRESS PVA ADHESIVES

2.20.1 3100 PVA Adhesive;2.20.1.1 For bonding decorative laminate to wood products.

2.20.2 3105 PVA Adhesive:2.20.2.1 High solids, for bonding decorative laminate to wood products.

2.20.3 3116 PVA Adhesive:2.20.3.1 For bonding decorative laminate to wood products and bonding paper-backed

products.

2.20.4 Limitations:2.20.4.1 Avoid tempered hardboard, fire retardant treated materials, moisture resistant

treated materials, low pressure melamine, metallic, polyester, and painted surfaces, wheatboard, and strawboard.

2.21 HOT PRESS PVA ADHESIVES

2.21.1 3131 PVA Adhesive:2.21.1.1 High solids for bonding decorative laminates to wood products.

2.21.2 3132 PVA Adhesive:2.21.2.1 High solids for bonding decorative laminates to wood products.


treated materials, low pressure melamine, metallic, polyester, and painted surfaces, wheatboard, and strawboard.

2.22 POSTFORMING AND PINCH ROLLING PVA ADHESIVES

2.22.1 3000/3001 PVA Adhesive:2.22.1.1 High solids for bonding decorative laminate to wood products and postforming

applications.


treated materials, low pressure melamine, metallic, polyester, and painted surfaces, liner grade laminate to wood.

3 EXECUTION

3.1 EXAMINATION

3.1.1 Examine surfaces for conditions that could adversely affect the performance of the decorative plastic laminate installation, including edge performance.

3.1.2 Surfaces to be adhesively bonded shall be clean, dry and free of any dust, loose paint, wax, moisture, dirt, grease, oil, rust, or other contaminants.

06 40 23.10-20

3.1.3 Commencement of work will constitute acceptance of existing conditions and surfaces to receive the work.

3.2 INSTALLATION, GENERAL

3.2.1 Install materials according to referenced Specification Sections and the following conformance standards as applicable:3.2.1.1 AWI AWS.3.2.1.2 KCMA A161.1.

3.2.2 To avoid stress cracking, do not use square-cut inside corners. All inside corners to have a minimum 1/8 inch radius and all edges routed smooth.

3.2.3 Drill oversized holes for screws, bolts, and similar fasteners. Slightly countersink fasteners into face side of laminate-clad substrate.

3.2.4 Use carbide-tipped saw and router blades for cutting, with high tool speed and low feed speed. Keep cutting blades sharp. Use appropriate hold-downs to prevent vibration.

3.3 ADHESIVE SPRAY APPLICATIONS

3.3.1 Comply with adhesive manufacturer's printed installation instructions.

3.3.2 Apply contact adhesive uniformly to both surfaces and with a minimum 80 percent coverage for each surface. Apply PVA adhesive to one side with a minimum 80 percent coverage.

3.3.3 Apply two coats of adhesive to porous surfaces. Provide 100 percent coverage for edges.

3.3.4 Apply uniform downward pressure (30 to 40 psi minimum) across the entire bonded surface.

3.4 ADHESIVE BRUSH APPLICATIONS

3.4.1 Comply with adhesive manufacturer's printed installation instructions.

3.4.2 Apply contact adhesive uniformly to both surfaces with a brush or solvent-resistant medium nap roller; cover each surface 100 percent. Apply PVA adhesive to one side, for 100 percent coverage.

3.4.3 Provide two coats of adhesive on porous surfaces. Double coat edges.

3.4.4 Apply uniform downward pressure (30 to 40 psi minimum) across the entire bonded surface.

3.5 RESURFACING LAMINATE INSTALLATION

3.5.1 Comply with resurfacing laminate manufacturer's printed installation instructions.

3.5.2 Substrate Repairs: Restore damaged substrates with specified repair materials. Sand and clean all repaired areas prior to applying resurfacing laminate.3.5.2.1 If bonding to a painted, stained, or varnished wood or wood veneer substrate,

sand surface smooth with #80 or #100 grit sandpaper. Remove all dust with a damp cloth. Allow to thoroughly dry.

3.5.2.2 If bonding a flat self-edge to an exposed substrate edge, the bonding surface will require a skim coat of the specified substrate material.

3.5.3 Substrate Cleaning: Substrates to receive resurfacing laminate must be clean and free of residue. Use one of the specified cleaning materials and allow proper dry time.

3.5.4 Prior to installation, and before removing peel sheet that covers laminate adhesive, dry fit

06 40 23.10-21

laminate to substrate. After peel sheet is removed, apply uniform bonding pressure (30 to 40 psi minimum) over the entire bonded surface, using an approved roller.3.5.4.1 Resurfacing laminate is NOT repositionable. Any attempts to reposition the

laminate will result in inadequate bonding.

3.5.5 Where self-edging is required, comply with resurfacing laminate manufacturer's printed installation instructions, including recommended adhesive.

3.6 DECORATIVE METAL INSTALLATION

3.6.1 General: Install decorative metal assemblies plumb, level, and true according to approved shop drawings and manufacturer's published installation instructions.

3.6.2 For balanced panel installation, apply manufacturer's recommended backer sheet to back (unexposed) panel surface.

3.6.3 Form joints in locations shown on approved shop drawings and acceptable to manufacturer.

3.6.4 Allow for material expansion and contraction as recommended by manufacturer.

3.6.5 Spray Adhesive Application: Provide a smooth, uniform adhesive spread with a minimum 80 percent coverage on each surface; use only spray equipment approved by decorative metals manufacturer. Apply uniform pressure over 100 percent of the area to be bonded, using approved rollers. Allow to dry according to manufacturer's recommendations. Promptly remove excess adhesive from material surfac es with specified adhesive cleaner.

3.6.6 Resurfacing Applications Using RE-COVER: Prior to installation, and before removing peel sheet that covers decorative metal laminate adhesive, dry fit metal to substrate. After peel sheet is removed, apply uniform bonding pressure (30 to 40 psi minimum) over the entire bonded surface, using an approved roller. RE-COVER metal is NOT repositionable. Any attempts to reposition the metal will result in inadequate bonding.

3.6.7 Do not remove any protective films until completion of installation.

3.7 CLEANING AND PROTECTION

3.7.1 Clean decorative plastic laminate according to manufacturer's printed care and maintenance instructions.

3.7.2 Protect installed products and finish surfaces from damage during remainder of construction period.

END OF SECTION

06 40 23.10-22

€¦ · Web viewUnsuitable substrates are high pressure laminate, plaster, concrete, and gypsum...

Documents

Transcript of €¦ · Web viewUnsuitable substrates are high pressure laminate, plaster, concrete, and gypsum...