· Web viewLarge spills: Stop the flow of material, if this is without risk. Dike the spilled...
7
XTREME POLISHING SYSTEMS PRODUCT IDENTIFIER - WECTGF B DATE & VERSION - 6 July 2022 Version 01 SAFETY DATA SHEET (SDS) SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier: WECTGF B Other means of identification: None Recommended use: Water based Epoxy Hardener Manufactured by: Xtreme Polishing Systems 2200 NW 32nd Street #700 Pompano Beach, FL E-mail Address : www.xtremepolishingsystems Prepared by: The Health, Safety and Environmental Department Telephone number of preparer: Fax number: Emergency Telephone Number: 24-Hour Emergency Telephone Number Canada (CANUTEC) : (613) 996-6666 SECTION 2. HAZARDS IDENTIFICATION GHS Classification of hazardous product Skin Sensitization (Category 1) Skin Corrosion/irritation (Category 2) Serious eye damage/irritation (Category 1) GHS Label Elements : Hazard Pictograms/symbols Signal Word: DANGER Hazard and Precautionary Statements: H317 May cause an allergic skin reaction H315 Causes skin irritation H318 Causes serious eye damage P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves/eye protection/face protection. P272 Contaminated work clothing should not be allowed out of the workplace. P264 Wash with plenty of water and soap thoroughly after handling. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. P310 Immediately call a POISON CENTER or doctor/physician. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P362 + P364 Take off contaminated clothing and wash before reuse. P501 Dispose of contents/container into safe container in accordance with local, regional or national regulations. Other Hazards Known: None known GHS Special Labeling: None known Page 1 of 7
Transcript of · Web viewLarge spills: Stop the flow of material, if this is without risk. Dike the spilled...
XTRE
ME
POLI
SHIN
G SY
STEM
SPRODUCT IDENTIFIER - WECTGF B
DATE & VERSION - 17 May 2023 Version 01
SAFETY DATA SHEET (SDS)
Page 1 of 1
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Product Identifier: WECTGF BOther means of identification: None
Recommended use: Water based Epoxy HardenerManufactured by: Xtreme Polishing Systems
2200 NW 32nd Street#700Pompano Beach, FL
E-mail Address : www.xtremepolishingsystemsPrepared by: The Health, Safety and Environmental Department
Telephone number of preparer: Fax number:
Emergency Telephone Number: 24-Hour Emergency Telephone Number Canada (CANUTEC) : (613) 996-6666
SECTION 2. HAZARDS IDENTIFICATION
GHS Classification of hazardous productSkin Sensitization (Category 1)Skin Corrosion/irritation (Category 2)Serious eye damage/irritation (Category 1)
GHS Label Elements: Hazard Pictograms/symbols
Signal Word: DANGERHazard and Precautionary Statements:H317 May cause an allergic skin reactionH315 Causes skin irritationH318 Causes serious eye damageP261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves/eye protection/face protection. P272 Contaminated work clothing should not be allowed out of the workplace. P264 Wash with plenty of water and soap thoroughly after handling. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. P310 Immediately call a POISON CENTER or doctor/physician. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P362 + P364 Take off contaminated clothing and wash before reuse. P501 Dispose of contents/container into safe container in accordance with local, regional or national regulations.Other Hazards Known: None knownGHS Special Labeling: None known
SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name CAS Number Concentration (%)Diethylene glycol monobutyl ether 112-34-5 1 - 5 %
Polyamine polymer Trade Secret 10 - 25 %2,4,6-tris (dimethylaminomethyl)phenol 90-72-2 1 - 5 %
Polyoxypropylene diamine 9046-10-0 1 - 5 %3,6,9-triazaundecamethylenediamine 112-57-2 1 - 5 %
SECTION 4. FIRST AID MEASURES
Inhalation IF INHALED: Remove person to fresh air and keep comfortable for breathing.Ingestion IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Skin Contact IF ON SKIN: Take off immediately all contaminated clothing. Wash immediately with plenty of soap and water.Eye Contact IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so.
Continue rinsing. Immediately call a POISON CENTER or doctor/physician.
Most important symptoms and effects (acute and delayed)The most important known symptoms and effects are described in the labelling (see Section 2) and/or in section 11.
Indication of any immediate medical attention and special treatment neededProvide general supportive measures and treat symptomatically. Chemical burns: Flush with water immediately. While flushing, remove clothes which do not adhere to affected area. Call an ambulance. Continue flushing during transport to hospital. Keep victim warm. Keep victim under observation. Symptoms may be delayed.
General InformationIF exposed or concerned: Get medical advice/attention. If you feel unwell, seek medical advice (show the label where possible). Ensure the medical personnel are aware of the material(s) involved, and take precautions to protect themselves. Show this safety data sheet to the doctor in attendance.
SECTION 5. FIRE-FIGHTING MEASURES
