SECTION 04 21 00CLAY MASONRY UNITS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2011 - 2018 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Clay masonry units.

B. Accessories including reinforcement, anchorage, flashing, etc.

1.2 RELATED SECTIONS

A. Section 04 05 13 - Masonry Mortaring.

B. Section 04 21 13.13 - Brick Veneer Masonry.

C. Section 04 01 00 - Maintenance of Masonry.

D. Section 05 12 13 - Architecturally-Exposed Structural Steel Framing.

E. Section 05 21 13 - Deep Longspan Steel Joist Framing.

F. Section 05 50 00 - Metal Fabrications.

G. Section 06 10 00 - Rough Carpentry.

H. Section 07 62 00 - Sheet Metal Flashing and Trim.

I. Section 07 84 13 - Penetration Firestopping.

J. Section 07 90 00 - Joint Protection.

K. Section ______-____________: Product requirements for window anchors for placement by this section.

L. Section ______-____________: Fireplace and chimney flue accessories.

M. Section _____-__________: Execution requirements for special anchors specified by this section.

1.3 REFERENCES

A. ASTM A 36 - Standard Specification for Carbon Structural Steel.

B. ASTM A 82 - Standard Specification for Steel Wire, Plain, for Concrete Reinforcement.

C. ASTM A 153/A 153M - Zinc Coating (Hot-Dip) on Iron and Steel Hardware.

04 21 00-1

D. ASTM A 615/A 615M - Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement.

E. ASTM A 616 - Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement.

F. ASTM A 617 - Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement.

G. ASTM A 666 - Standard Specification for Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar.

H. ASTM A 775 - Standard Specification for Epoxy-Coated Steel Reinforcing Bars.

I. ASTM A 996 - Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement.

J. ASTM A 1008 - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable.

K. ASTM B 370 - Standard Specification for Copper Sheet and Strip for Building Construction.

L. ASTM C 62 - Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)

M. ASTM C 67 - Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile.

N. ASTM C 216 - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale).

O. ASTM C 1261 - Standard Specification for Firebox Brick for Residential Fireplaces.

P. ASTM D 1056 - Standard Specification for Flexible Cellular Materials Sponge or Expanded Rubber.

Q. ANSI A41.1 Building Code Requirements for Masonry

R. ANSI A41.2 Building Code Requirements for Reinforced Masonry

1.4 DESIGN / PERFORMANCE REQUIREMENTS

A. Work shall conform to ANSI A41.1 Building Code Requirements for Masonry, ANSI A41.2 Building Code Requirements for Reinforced Masonry or equivalent sections of the applicable Code.

1.5 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

C. Verification Samples: Furnish not less than five individual brick as samples, showing extreme variations in color and texture.

04 21 00-2

D. Manufacturer's Certificates: Test reports to certify products meet or exceed specified requirements.

1.6 QUALITY ASSURANCE

A. Manufacturer Qualifications: Primary products specified in this section will be supplied by a single manufacturer with a minimum of ten years experience.

B. Installer Qualifications: Company specializing in performing Work of this section with minimum three years documented experience.

C. Mock-Up: Mock-up or sample panels shall be used to review brick and mortar color and serve as the standard of workmanship for the Project.1. Construct masonry wall mockup, 4 feet (1.2 m) long by 3 feet (1 m) high, showing

proposed color range, texture, bond, mortar and workmanship.2. Locate where directed by Architect.3. When required provide a separate panel for each type of brick and mortar specified.4. Do not proceed with remaining work until workmanship, color and texture are

approved by Architect.5. Protect the panel until the Work is completed and accepted by the Architect.

D. Brick Tests:1. Submit brick tests sampled and tested in accordance with ASTM C 67.2. Test Reports:

a. Testing and reports shall be completed by an independent laboratory.b. Test reports for each type of building and facing brick shall be submitted to the

Architect/Engineer for review.c. Test reports shall indicate:

1) Compressive strength.2) 24 hour cold water absorption.3) 5-hour boil absorption.4) Saturation coefficient.5) Initial rate of absorption.6) Efflorescence.

1.7 ALLOWANCES

A. Include under provisions of Section 01 21 29 - Quantity Allowances.

B. Allowance includes each type of clay masonry unit included in this section. Installation is included in this section and is part of Contract Sum/Price.

1.8 DELIVERY, STORAGE, AND HANDLING

A. Store products in manufacturer's unopened packaging until ready for installation.

B. Deliver products of this section on pallets, with individual faces protected; keep dry.

C. Store brick off the ground to prevent contamination by mud, dust or other materials likely to cause staining or other defects.

D. Cover all materials with a non staining waterproof membrane material when necessary to protect from elements.

1.9 COORDINATION

A. Coordinate masonry work with installation of built-in work and adjacent construction.

04 21 00-3

1.10 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

B. Protection of Work:1. Wall Covering:

a. During erection, cover top of wall with strong nonstaining waterproof membrane at end of each day or shutdown.

b. Cover partially completed walls when work is not in progress.c. Extend cover minimum of 24 inches (610 mm) down both sides.d. Hold cover securely in place.

2. Load Applications:a. Do not apply uniform floor or roof loading for at least 12 hours after building

masonry columns or wall.b. Do not apply concentrated loads for at least 3 days after building masonry

columns or walls.3. Stain Prevention:

a. Prevent grout or mortar from staining the face of masonry.b. Remove immediately grout or mortar in contact with face of masonry.c. Protect all sills, ledges and projections from droppings of mortar.d. Protect base of wall from rain-splashed mud and mortar splatter.e. Scaffold boards shall be turned on edge when work is not in progress.

C. Cold Weather Protection:1. Preparation:

a. When ice or snow has formed on masonry bed, remove by carefully applying heat not to exceed 120 degrees F (49 degrees C) until surface is dry to the touch.

b. Remove all masonry deemed frozen or damaged.2. Products:

a. When brick suction exceeds 30 grams/min/30 sq. in., sprinkle with heated water:1) When units are above 32 degrees F (0 degrees C), heat water above 70

degrees F (21 degrees C).2) When units are below 32 degrees F (0 degrees C), heat water above 130

degrees F (54 degrees C).b. Do not use wet or frozen units.

3. Construction Requirements While Work is Progressing:a. Air temperature 40 degrees F (4 degrees C) to 32 degrees F (0 degrees C):

1) Heat sand or mixing water to produce mortar temperatures between 40 degrees F (4 degrees C) to 32 degrees F (0 degrees C).

b. Air temperature 32 degrees F (0 degrees C) to 25 degrees F (minus 4 degrees C):1) Heat sand and mixing water to produce temperatures between 40

degrees F (4 degrees C) and 120 degrees F (49 degrees C).2) Maintain temperature of mortar on boards above freezing.

c. Air temperatures 25 degrees F (minus 4 degrees C) to 20 degrees F (minus 7 degrees C).1) Heat sand and mixing water to produce mortar temperatures between 40

degrees F (4 degrees C) and 120 degrees F. (49 degrees C).2) Maintain mortar temperatures on boards above freezing.3) Use approved heat sources on both sides of walls under construction.4) Use windbreaks when wind is in excess of 15 mph (24 kms/h).

d. Air temperature 20 degrees F (minus 7 degrees C) and below:

04 21 00-4

1) Heat sand and mixing water to produce mortar temperatures between 40 degrees F (4 degrees C) and 120 degrees F (49 degrees C.).

2) Provide enclosures and auxiliary heat to maintain air temperature above 32 degrees F (0 degrees C).

3) Minimum temperature of units when laid: 20 degrees F (minus 7 degrees C).

e. Mean daily air temperature 40 degrees F (4 degrees C) to 32 degrees F (0 degrees C):1) Protect masonry from rain or snow for 24 hours by covering with

weather-resistive membrane.f. Mean daily air temperature 32 degrees F (0 degrees C) to 25 degrees F (minus

4 degrees C):1) Completely cover masonry with weather-resistive membrane for 24 hrs.

g. Mean daily temperature 25 degrees F (minus 4 degrees C) to 20 degrees F (minus 7 degrees C):1) Completely cover masonry with insulating blankets or equal protection for

24 hours.h. Mean daily air temperature 20 degrees F (minus 7 degrees C) and below:

1) Maintain masonry temperature above 32 degrees F (0 degrees C) for 24 hours by:a) Method: Enclosure and supplementary heat.b) Method: Electric heating blankets.c) Method: Infrared lamps.d) Method: Other approved methods.

D. Hot Weather Protection:1. When temperature exceeds 100 degrees F or 90 degrees F with 8 mph wind (above

38 degrees C or 32 degrees C with 13 kms/h wind).a. Maintain temperature of mortar and grout between 70 degrees F and 120

degrees F (21 degrees C and 49 degrees C).1) Limit spread of mortar bed to 4 feet (1.2 m). Place units within 1 minute

of spreading mortar.b. Partially or recently completed walls may be fog sprayed and/or covered with

opaque plastic or canvas or both to control moisture evaporation.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Corporate Office & Bowerston Plant, which is located at: The Bowerston Shale Company 515 E. Main Street P. O. Box 199; Bowerston, OH 44695; Tel: 740-269-2921; Fax: 740-269-5456; Email:request info (info@bowerstonshale.com); Web:www.bowerstonshale.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 CLAY MASONRY UNITS

A. Face Brick: Provide to the sizes colors and textures specified. Furnish special units for corners, lintels, bullnosed corners and others as indicated on the Drawings. Shaped to profile indicated and provide to color and surface texture to match face brick unless otherwise indicated.1. Modular Size: 3-5/8 inch Wide by 2-1/4 inch High by 7-5/8 inch Long (92.1 mm Wide

by 57.2 mm High by 193.7 mm Long).

04 21 00-5

a. Face Brick: ASTM C 216 Grade: SW Type: FBS.b. Face Brick: ASTM C 216 Grade: SW Type: FBX.c. Colors:

1) As selected by the Architect from the range available within the allowance specified.

2) #41 W/C3) #41 Smooth4) #1000 Buff Smooth Flash5) #1003 Buff Smooth6) #110 Red Smooth7) #1100 Red Smooth Flash8) #1110 Cherry Red Smooth Flash9) #110-3 Mahogany Smooth10) #110-6 Sorrel Smooth11) #1113 Crimson Flash Smooth12) #1116 Chestnut Flash Smooth13) #120 Red Rugg14) #1200 Monticello Blend15) #125 Cherry Bark16) #1252 Cardinal Blend17) #130 Red W/C18) #1300 Valley Blend19) #130-1 W/C20) #130-3 Mahogany W/C21) #130-6 Sorrell W/C22) #1303 Mahogany Flash W/C23) #1306 Sorrel Flash W/C24) #1310 Cherry Flash W/C25) #1348 Red Rough Tex Flash26) #138 Red R/T27) #1425 Buff Bark Flash28) #1445 Mission Blend29) #1448 Blush Buff Flash R/T30) #145 Red Vertex31) #1450 Red Vertex Flash32) #145-3 Mahogany Vertex33) #145-6 Sorrel Vertex34) #1520 Blush Buff Sand Face35) #1525 Buff Sand Face Flash36) #1545 Buff Vertex Flash37) #1546 Dark Blush Buff Vertex38) #1620 Red Sand Face39) #1625 Red Flash Sand Face40) #208 Smooth FR IS41) #225 Red Bark Flash42) #245 Blush Buff Rugg43) #300 White Birch Bark44) #325 Walnut Bark45) #340 White W/C46) #340-1 W/C47) #345 White Vertex48) #360 White Rugg49) #425 Blush Buff Bark Blend50) #443 Lite Blush Buff Velvet51) #445 Blush Buff Velvet52) #446 Darker Blush Buff Velvet

04 21 00-6

53) #501 Cordovan Velvet54) #510 Cordovan Smooth55) #520 Cordovan Sandface56) #525 Cordovan Rugg57) #545 Cordovan Vertex58) #610 Dark Red Smooth Iron Spot59) #615 Red Smooth Full Range Iron Spot60) #717 Dark Smooth Iron Spot61) #721 Dark Smooth Full Range Iron Spot62) #7210 Dark W/C Full Range Iron Spot63) #806 Gray And White Bark Blend64) #825 Medium Gray/Brown Bark Blend65) #923 Light Gray Bark66) #925 Gray Bark Blend67) #926 Dark Gray Bark68) 49R Blend IS69) 85/15 W/C70) 85/15 Clear W/C71) 938 Light Gray W/C72) 940 Medium Gray W/C73) 942 Dark Gray W/C74) 938-1 Light Gray W/C75) 940-1 Medium Gray W/C76) 942-1 Dark Gray W/C77) Antique Red Flash V/M78) Autumn Blend Clear W/C79) Autumn Blend R/T80) Autumn Blend Smooth81) Autumn Blend V/M82) Autumn Blend W/C83) Autumn Rose Clear W/C84) Autumn Rose R/T85) Autumn Rose Smooth86) Autumn Rose V/M87) Autumn Rose W/C88) Aztec Red89) Bordeaux90) Briarcliffe91) Buckskin92) Burgundy Blend93) BW 50 R/T94) BW 50 V/M95) BW 50 W/C96) Canyon Blend R/T Full Range97) Canyon Blend R/T Lite Flash98) Canyon R/T99) Charcoal Gray100) Cherokee Blend V/M101) Chocolate R/T102) Chocolate R/T Full Range103) Chocolate Smooth104) Chocolate Smooth Full Range105) Chocolate W/C106) Chocolate W/C Full Range107) Cocoa108) Collegiate Red Flash V/M

04 21 00-7

109) Colonial Brown110) Dark Red Flash W/C NB111) Dark Red Flash Smooth NB112) Dark Red Flash Bark113) Dark Red Flash V/M114) Dark Red Smooth115) Desert Brown Smooth116) Desert Brown Flash Smooth117) Desert Brown W/C118) Desert Brown Flash W/C119) Desert Sage Smooth120) Desert Sage W/C121) Desert Sage Flash W/C122) Desert Tan Smooth123) Desert Tan Velvet124) Eau Claire125) Frisco Blend126) Harrison Range127) Harvest Blend128) Hoosier Blend129) Irish Gold130) Knox Blend131) Latrobe Blend W/C132) Lite Chocolate FL V/M (W.B.)133) Mohican Blend134) Monroe Blend135) Old English136) Olde Cheyenne137) Olde Harvard Smooth138) Olde Windsor139) Patent Black W/C140) Phoenix Red141) Pioneer Blend Smooth142) Pioneer Blend W/C143) Pioneer Blend W/C IS144) Pioneer W/C145) Red Bark Full Range146) Red Brush-Tex147) Red Brush-Tex Flash148) Red Smooth149) Red Smooth Full Range150) Red Smooth Iron Spot151) Red V/M152) Red V/M Full Range153) Red W/C Full Range154) Rose Mist155) Rustic Red156) Santa Fe R/T157) Santa Fe Smooth158) Santa Fe W/C159) Santa Fe W/C IS160) Sunset Clear W/C161) Sunset Flash R/T162) Sunset Flash Smooth163) Sunset Flash V/M164) Sunset Flash W/C

04 21 00-8

165) Terra Cotta Bark166) Terra Cotta Red R/T167) Terra Cotta Red V/M168) Terra Cotta Red W/C169) University Blend Smooth170) University Blend Smooth Iron Spot171) University Blend V/M172) University Blend W/C173) University Blend W/C Iron Spot174) Woodsfield Blend

2. Standard Size: 3-/5/8 inch Wide by 2-1/4 inch High by 8 inch (Long 92.1 mm Wide by 57.2 mm High by 203 mm Long).a. Face Brick: ASTM C 216 Grade: SW Type: FBS.b. Face Brick: ASTM C 216 Grade: SW Type: FBX.c. Colors:

1) As selected by the Architect from the range available within the allowance specified.

2) #41 W/C3) #41 Smooth4) #1000 Buff Smooth Flash5) #1003 Buff Smooth6) #110 Red Smooth7) #1100 Red Smooth Flash8) #1110 Cherry Red Smooth Flash9) #110-3 Mahogany Smooth10) #110-6 Sorrel Smooth11) #1113 Crimson Flash Smooth12) #1116 Chestnut Flash Smooth13) #120 Red Rugg14) #1200 Monticello Blend15) #125 Cherry Bark16) #1252 Cardinal Blend17) #130 Red W/C18) #1300 Valley Blend19) #130-1 W/C20) #130-3 Mahogany W/C21) #130-6 Sorrell W/C22) #1303 Mahogany Flash W/C23) #1306 Sorrel Flash W/C24) #1310 Cherry Flash W/C25) #1348 Red Rough Tex Flash26) #138 Red R/T27) #1425 Buff Bark Flash28) #1445 Mission Blend29) #1448 Blush Buff Flash R/T30) #145 Red Vertex31) #1450 Red Vertex Flash32) #145-3 Mahogany Vertex33) #145-6 Sorrel Vertex34) #1520 Blush Buff Sand Face35) #1525 Buff Sand Face Flash36) #1545 Buff Vertex Flash37) #1546 Dark Blush Buff Vertex38) #1620 Red Sand Face39) #1625 Red Flash Sand Face40) #208 Smooth FR IS

04 21 00-9

41) #225 Red Bark Flash42) #245 Blush Buff Rugg43) #300 White Birch Bark44) #325 Walnut Bark45) #340 White W/C46) #340-1 W/C47) #345 White Vertex48) #360 White Rugg49) #425 Blush Buff Bark Blend50) #443 Lite Blush Buff Velvet51) #445 Blush Buff Velvet52) #446 Darker Blush Buff Velvet53) #501 Cordovan Velvet54) #510 Cordovan Smooth55) #520 Cordovan Sandface56) #525 Cordovan Rugg57) #545 Cordovan Vertex58) #610 Dark Red Smooth Iron Spot59) #615 Red Smooth Full Range Iron Spot60) #717 Dark Smooth Iron Spot61) #721 Dark Smooth Full Range Iron Spot62) #7210 Dark W/C Full Range Iron Spot63) #806 Gray And White Bark Blend64) #825 Medium Gray/Brown Bark Blend65) #923 Light Gray Bark66) #925 Gray Bark Blend67) #926 Dark Gray Bark68) 49R Blend IS69) 85/15 W/C70) 85/15 Clear W/C71) 938 Light Gray W/C72) 940 Medium Gray W/C73) 942 Dark Gray W/C74) 938-1 Light Gray W/C75) 940-1 Medium Gray W/C76) 942-1 Dark Gray W/C77) Antique Red Flash V/M78) Autumn Blend Clear W/C79) Autumn Blend R/T80) Autumn Blend Smooth81) Autumn Blend V/M82) Autumn Blend W/C83) Autumn Rose Clear W/C84) Autumn Rose R/T85) Autumn Rose Smooth86) Autumn Rose V/M87) Autumn Rose W/C88) Aztec Red89) Bordeaux90) Briarcliffe91) Buckskin92) Burgundy Blend93) BW 50 R/T94) BW 50 V/M95) BW 50 W/C96) Canyon Blend R/T Full Range

04 21 00-10

97) Canyon Blend R/T Lite Flash98) Canyon R/T99) Charcoal Gray100) Cherokee Blend V/M101) Chocolate R/T102) Chocolate R/T Full Range103) Chocolate Smooth104) Chocolate Smooth Full Range105) Chocolate W/C106) Chocolate W/C Full Range107) Cocoa108) Collegiate Red Flash V/M109) Colonial Brown110) Dark Red Flash W/C NB111) Dark Red Flash Smooth NB112) Dark Red Flash Bark113) Dark Red Flash V/M114) Dark Red Smooth115) Desert Brown Smooth116) Desert Brown Flash Smooth117) Desert Brown W/C118) Desert Brown Flash W/C119) Desert Sage Smooth120) Desert Sage W/C121) Desert Sage Flash W/C122) Desert Tan Smooth123) Desert Tan Velvet124) Eau Claire125) Frisco Blend126) Harrison Range127) Harvest Blend128) Hoosier Blend129) Irish Gold130) Knox Blend131) Latrobe Blend W/C132) Lite Chocolate FL V/M (W.B.)133) Mohican Blend134) Monroe Blend135) Old English136) Olde Cheyenne137) Olde Harvard Smooth138) Olde Windsor139) Patent Black W/C140) Phoenix Red141) Pioneer Blend Smooth142) Pioneer Blend W/C143) Pioneer Blend W/C IS144) Pioneer W/C145) Red Bark Full Range146) Red Brush-Tex147) Red Brush-Tex Flash148) Red Smooth149) Red Smooth Full Range150) Red Smooth Iron Spot151) Red V/M152) Red V/M Full Range

04 21 00-11

153) Red W/C Full Range154) Rose Mist155) Rustic Red156) Santa Fe R/T157) Santa Fe Smooth158) Santa Fe W/C159) Santa Fe W/C IS160) Sunset Clear W/C161) Sunset Flash R/T162) Sunset Flash Smooth163) Sunset Flash V/M164) Sunset Flash W/C165) Terra Cotta Bark166) Terra Cotta Red R/T167) Terra Cotta Red V/M168) Terra Cotta Red W/C169) University Blend Smooth170) University Blend Smooth Iron Spot171) University Blend V/M172) University Blend W/C173) University Blend W/C Iron Spot174) Woodsfield Blend

3. Engineer Size: 3-5/8 inch Wide by 2-3/4 inch High by 7-5/8 inch Long (92.1 mm Wide by 71.4 mm High by 193.7 mm Long).a. Face Brick: ASTM C 216 Grade: SW Type: FBS.b. Face Brick: ASTM C 216 Grade: SW Type: FBX.c. Colors:

1) As selected by the Architect from the range available within the allowance specified.

2) #41 W/C3) #41 Smooth4) #1000 Buff Smooth Flash5) #1003 Buff Smooth6) #110 Red Smooth7) #1100 Red Smooth Flash8) #1110 Cherry Red Smooth Flash9) #110-3 Mahogany Smooth10) #110-6 Sorrel Smooth11) #1113 Crimson Flash Smooth12) #1116 Chestnut Flash Smooth13) #120 Red Rugg14) #1200 Monticello Blend15) #125 Cherry Bark16) #1252 Cardinal Blend17) #130 Red W/C18) #1300 Valley Blend19) #130-1 W/C20) #130-3 Mahogany W/C21) #130-6 Sorrell W/C22) #1303 Mahogany Flash W/C23) #1306 Sorrel Flash W/C24) #1310 Cherry Flash W/C25) #1348 Red Rough Tex Flash26) #138 Red R/T27) #1425 Buff Bark Flash28) #1445 Mission Blend

04 21 00-12

29) #1448 Blush Buff Flash R/T30) #145 Red Vertex31) #1450 Red Vertex Flash32) #145-3 Mahogany Vertex33) #145-6 Sorrel Vertex34) #1520 Blush Buff Sand Face35) #1525 Buff Sand Face Flash36) #1545 Buff Vertex Flash37) #1546 Dark Blush Buff Vertex38) #1620 Red Sand Face39) #1625 Red Flash Sand Face40) #208 Smooth FR IS41) #225 Red Bark Flash42) #245 Blush Buff Rugg43) #300 White Birch Bark44) #325 Walnut Bark45) #340 White W/C46) #340-1 W/C47) #345 White Vertex48) #360 White Rugg49) #425 Blush Buff Bark Blend50) #443 Lite Blush Buff Velvet51) #445 Blush Buff Velvet52) #446 Darker Blush Buff Velvet53) #501 Cordovan Velvet54) #510 Cordovan Smooth55) #520 Cordovan Sandface56) #525 Cordovan Rugg57) #545 Cordovan Vertex58) #610 Dark Red Smooth Iron Spot59) #615 Red Smooth Full Range Iron Spot60) #717 Dark Smooth Iron Spot61) #721 Dark Smooth Full Range Iron Spot62) #7210 Dark W/C Full Range Iron Spot63) #806 Gray And White Bark Blend64) #825 Medium Gray/Brown Bark Blend65) #923 Light Gray Bark66) #925 Gray Bark Blend67) #926 Dark Gray Bark68) 49R Blend IS69) 85/15 W/C70) 85/15 Clear W/C71) 938 Light Gray W/C72) 940 Medium Gray W/C73) 942 Dark Gray W/C74) 938-1 Light Gray W/C75) 940-1 Medium Gray W/C76) 942-1 Dark Gray W/C77) Antique Red Flash V/M78) Autumn Blend Clear W/C79) Autumn Blend R/T80) Autumn Blend Smooth81) Autumn Blend V/M82) Autumn Blend W/C83) Autumn Rose Clear W/C84) Autumn Rose R/T

04 21 00-13

85) Autumn Rose Smooth86) Autumn Rose V/M87) Autumn Rose W/C88) Aztec Red89) Bordeaux90) Briarcliffe91) Buckskin92) Burgundy Blend93) BW 50 R/T94) BW 50 V/M95) BW 50 W/C96) Canyon Blend R/T Full Range97) Canyon Blend R/T Lite Flash98) Canyon R/T99) Charcoal Gray100) Cherokee Blend V/M101) Chocolate R/T102) Chocolate R/T Full Range103) Chocolate Smooth104) Chocolate Smooth Full Range105) Chocolate W/C106) Chocolate W/C Full Range107) Cocoa108) Collegiate Red Flash V/M109) Colonial Brown110) Dark Red Flash W/C NB111) Dark Red Flash Smooth NB112) Dark Red Flash Bark113) Dark Red Flash V/M114) Dark Red Smooth115) Desert Brown Smooth116) Desert Brown Flash Smooth117) Desert Brown W/C118) Desert Brown Flash W/C119) Desert Sage Smooth120) Desert Sage W/C121) Desert Sage Flash W/C122) Desert Tan Smooth123) Desert Tan Velvet124) Eau Claire125) Frisco Blend126) Harrison Range127) Harvest Blend128) Hoosier Blend129) Irish Gold130) Knox Blend131) Latrobe Blend W/C132) Lite Chocolate FL V/M (W.B.)133) Mohican Blend134) Monroe Blend135) Old English136) Olde Cheyenne137) Olde Harvard Smooth138) Olde Windsor139) Patent Black W/C140) Phoenix Red

04 21 00-14

141) Pioneer Blend Smooth142) Pioneer Blend W/C143) Pioneer Blend W/C IS144) Pioneer W/C145) Red Bark Full Range146) Red Brush-Tex147) Red Brush-Tex Flash148) Red Smooth149) Red Smooth Full Range150) Red Smooth Iron Spot151) Red V/M152) Red V/M Full Range153) Red W/C Full Range154) Rose Mist155) Rustic Red156) Santa Fe R/T157) Santa Fe Smooth158) Santa Fe W/C159) Santa Fe W/C IS160) Sunset Clear W/C161) Sunset Flash R/T162) Sunset Flash Smooth163) Sunset Flash V/M164) Sunset Flash W/C165) Terra Cotta Bark166) Terra Cotta Red R/T167) Terra Cotta Red V/M168) Terra Cotta Red W/C169) University Blend Smooth170) University Blend Smooth Iron Spot171) University Blend V/M172) University Blend W/C173) University Blend W/C Iron Spot174) Woodsfield Blend

4. Norman Size: 3-/5/8 inch Wide by 2-1/4 inch High by 11-5/8 inch Long (92.1 mm Wide by 57.2 mm High by 295.3 mm Long).a. Face Brick: ASTM C 216 Grade: SW Type: FBS.b. Face Brick: ASTM C 216 Grade: SW Type: FBX.c. Colors:

1) As selected by the Architect from the range available within the allowance specified.

2) #41 W/C3) #41 Smooth4) #1000 Buff Smooth Flash5) #1003 Buff Smooth6) #110 Red Smooth7) #1100 Red Smooth Flash8) #1110 Cherry Red Smooth Flash9) #110-3 Mahogany Smooth10) #110-6 Sorrel Smooth11) #1113 Crimson Flash Smooth12) #1116 Chestnut Flash Smooth13) #120 Red Rugg14) #1200 Monticello Blend15) #125 Cherry Bark16) #1252 Cardinal Blend

04 21 00-15

17) #130 Red W/C18) #1300 Valley Blend19) #130-1 W/C20) #130-3 Mahogany W/C21) #130-6 Sorrell W/C22) #1303 Mahogany Flash W/C23) #1306 Sorrel Flash W/C24) #1310 Cherry Flash W/C25) #1348 Red Rough Tex Flash26) #138 Red R/T27) #1425 Buff Bark Flash28) #1445 Mission Blend29) #1448 Blush Buff Flash R/T30) #145 Red Vertex31) #1450 Red Vertex Flash32) #145-3 Mahogany Vertex33) #145-6 Sorrel Vertex34) #1520 Blush Buff Sand Face35) #1525 Buff Sand Face Flash36) #1545 Buff Vertex Flash37) #1546 Dark Blush Buff Vertex38) #1620 Red Sand Face39) #1625 Red Flash Sand Face40) #208 Smooth FR IS41) #225 Red Bark Flash42) #245 Blush Buff Rugg43) #300 White Birch Bark44) #325 Walnut Bark45) #340 White W/C46) #340-1 W/C47) #345 White Vertex48) #360 White Rugg49) #425 Blush Buff Bark Blend50) #443 Lite Blush Buff Velvet51) #445 Blush Buff Velvet52) #446 Darker Blush Buff Velvet53) #501 Cordovan Velvet54) #510 Cordovan Smooth55) #520 Cordovan Sandface56) #525 Cordovan Rugg57) #545 Cordovan Vertex58) #610 Dark Red Smooth Iron Spot59) #615 Red Smooth Full Range Iron Spot60) #717 Dark Smooth Iron Spot61) #721 Dark Smooth Full Range Iron Spot62) #7210 Dark W/C Full Range Iron Spot63) #806 Gray And White Bark Blend64) #825 Medium Gray/Brown Bark Blend65) #923 Light Gray Bark66) #925 Gray Bark Blend67) #926 Dark Gray Bark68) 49R Blend IS69) 85/15 W/C70) 85/15 Clear W/C71) 938 Light Gray W/C72) 940 Medium Gray W/C

04 21 00-16

73) 942 Dark Gray W/C74) 938-1 Light Gray W/C75) 940-1 Medium Gray W/C76) 942-1 Dark Gray W/C77) Antique Red Flash V/M78) Autumn Blend Clear W/C79) Autumn Blend R/T80) Autumn Blend Smooth81) Autumn Blend V/M82) Autumn Blend W/C83) Autumn Rose Clear W/C84) Autumn Rose R/T85) Autumn Rose Smooth86) Autumn Rose V/M87) Autumn Rose W/C88) Aztec Red89) Bordeaux90) Briarcliffe91) Buckskin92) Burgundy Blend93) BW 50 R/T94) BW 50 V/M95) BW 50 W/C96) Canyon Blend R/T Full Range97) Canyon Blend R/T Lite Flash98) Canyon R/T99) Charcoal Gray100) Cherokee Blend V/M101) Chocolate R/T102) Chocolate R/T Full Range103) Chocolate Smooth104) Chocolate Smooth Full Range105) Chocolate W/C106) Chocolate W/C Full Range107) Cocoa108) Collegiate Red Flash V/M109) Colonial Brown110) Dark Red Flash W/C NB111) Dark Red Flash Smooth NB112) Dark Red Flash Bark113) Dark Red Flash V/M114) Dark Red Smooth115) Desert Brown Smooth116) Desert Brown Flash Smooth117) Desert Brown W/C118) Desert Brown Flash W/C119) Desert Sage Smooth120) Desert Sage W/C121) Desert Sage Flash W/C122) Desert Tan Smooth123) Desert Tan Velvet124) Eau Claire125) Frisco Blend126) Harrison Range127) Harvest Blend128) Hoosier Blend

04 21 00-17

129) Irish Gold130) Knox Blend131) Latrobe Blend W/C132) Lite Chocolate FL V/M (W.B.)133) Mohican Blend134) Monroe Blend135) Old English136) Olde Cheyenne137) Olde Harvard Smooth138) Olde Windsor139) Patent Black W/C140) Phoenix Red141) Pioneer Blend Smooth142) Pioneer Blend W/C143) Pioneer Blend W/C IS144) Pioneer W/C145) Red Bark Full Range146) Red Brush-Tex147) Red Brush-Tex Flash148) Red Smooth149) Red Smooth Full Range150) Red Smooth Iron Spot151) Red V/M152) Red V/M Full Range153) Red W/C Full Range154) Rose Mist155) Rustic Red156) Santa Fe R/T157) Santa Fe Smooth158) Santa Fe W/C159) Santa Fe W/C IS160) Sunset Clear W/C161) Sunset Flash R/T162) Sunset Flash Smooth163) Sunset Flash V/M164) Sunset Flash W/C165) Terra Cotta Bark166) Terra Cotta Red R/T167) Terra Cotta Red V/M168) Terra Cotta Red W/C169) University Blend Smooth170) University Blend Smooth Iron Spot171) University Blend V/M172) University Blend W/C173) University Blend W/C Iron Spot174) Woodsfield Blend

5. Norwegian Size: 3-/5/8 inch Wide by 2-3/4 inch High by 11-5/8 inch Long (92.1 mm Wide by 71.4 mm High by 295.3mm).a. Face Brick: ASTM C 216 Grade: SW Type: FBS.b. Face Brick: ASTM C 216 Grade: SW Type: FBX.c. Colors:

1) As selected by the Architect from the range available within the allowance specified.

2) #41 W/C3) #41 Smooth4) #1000 Buff Smooth Flash

04 21 00-18

5) #1003 Buff Smooth6) #110 Red Smooth7) #1100 Red Smooth Flash8) #1110 Cherry Red Smooth Flash9) #110-3 Mahogany Smooth10) #110-6 Sorrel Smooth11) #1113 Crimson Flash Smooth12) #1116 Chestnut Flash Smooth13) #120 Red Rugg14) #1200 Monticello Blend15) #125 Cherry Bark16) #1252 Cardinal Blend17) #130 Red W/C18) #1300 Valley Blend19) #130-1 W/C20) #130-3 Mahogany W/C21) #130-6 Sorrell W/C22) #1303 Mahogany Flash W/C23) #1306 Sorrel Flash W/C24) #1310 Cherry Flash W/C25) #1348 Red Rough Tex Flash26) #138 Red R/T27) #1425 Buff Bark Flash28) #1445 Mission Blend29) #1448 Blush Buff Flash R/T30) #145 Red Vertex31) #1450 Red Vertex Flash32) #145-3 Mahogany Vertex33) #145-6 Sorrel Vertex34) #1520 Blush Buff Sand Face35) #1525 Buff Sand Face Flash36) #1545 Buff Vertex Flash37) #1546 Dark Blush Buff Vertex38) #1620 Red Sand Face39) #1625 Red Flash Sand Face40) #208 Smooth FR IS41) #225 Red Bark Flash42) #245 Blush Buff Rugg43) #300 White Birch Bark44) #325 Walnut Bark45) #340 White W/C46) #340-1 W/C47) #345 White Vertex48) #360 White Rugg49) #425 Blush Buff Bark Blend50) #443 Lite Blush Buff Velvet51) #445 Blush Buff Velvet52) #446 Darker Blush Buff Velvet53) #501 Cordovan Velvet54) #510 Cordovan Smooth55) #520 Cordovan Sandface56) #525 Cordovan Rugg57) #545 Cordovan Vertex58) #610 Dark Red Smooth Iron Spot59) #615 Red Smooth Full Range Iron Spot60) #717 Dark Smooth Iron Spot

04 21 00-19

61) #721 Dark Smooth Full Range Iron Spot62) #7210 Dark W/C Full Range Iron Spot63) #806 Gray And White Bark Blend64) #825 Medium Gray/Brown Bark Blend65) #923 Light Gray Bark66) #925 Gray Bark Blend67) #926 Dark Gray Bark68) 49R Blend IS69) 85/15 W/C70) 85/15 Clear W/C71) 938 Light Gray W/C72) 940 Medium Gray W/C73) 942 Dark Gray W/C74) 938-1 Light Gray W/C75) 940-1 Medium Gray W/C76) 942-1 Dark Gray W/C77) Antique Red Flash V/M78) Autumn Blend Clear W/C79) Autumn Blend R/T80) Autumn Blend Smooth81) Autumn Blend V/M82) Autumn Blend W/C83) Autumn Rose Clear W/C84) Autumn Rose R/T85) Autumn Rose Smooth86) Autumn Rose V/M87) Autumn Rose W/C88) Aztec Red89) Bordeaux90) Briarcliffe91) Buckskin92) Burgundy Blend93) BW 50 R/T94) BW 50 V/M95) BW 50 W/C96) Canyon Blend R/T Full Range97) Canyon Blend R/T Lite Flash98) Canyon R/T99) Charcoal Gray100) Cherokee Blend V/M101) Chocolate R/T102) Chocolate R/T Full Range103) Chocolate Smooth104) Chocolate Smooth Full Range105) Chocolate W/C106) Chocolate W/C Full Range107) Cocoa108) Collegiate Red Flash V/M109) Colonial Brown110) Dark Red Flash W/C NB111) Dark Red Flash Smooth NB112) Dark Red Flash Bark113) Dark Red Flash V/M114) Dark Red Smooth115) Desert Brown Smooth116) Desert Brown Flash Smooth

04 21 00-20

117) Desert Brown W/C118) Desert Brown Flash W/C119) Desert Sage Smooth120) Desert Sage W/C121) Desert Sage Flash W/C122) Desert Tan Smooth123) Desert Tan Velvet124) Eau Claire125) Frisco Blend126) Harrison Range127) Harvest Blend128) Hoosier Blend129) Irish Gold130) Knox Blend131) Latrobe Blend W/C132) Lite Chocolate FL V/M (W.B.)133) Mohican Blend134) Monroe Blend135) Old English136) Olde Cheyenne137) Olde Harvard Smooth138) Olde Windsor139) Patent Black W/C140) Phoenix Red141) Pioneer Blend Smooth142) Pioneer Blend W/C143) Pioneer Blend W/C IS144) Pioneer W/C145) Red Bark Full Range146) Red Brush-Tex147) Red Brush-Tex Flash148) Red Smooth149) Red Smooth Full Range150) Red Smooth Iron Spot151) Red V/M152) Red V/M Full Range153) Red W/C Full Range154) Rose Mist155) Rustic Red156) Santa Fe R/T157) Santa Fe Smooth158) Santa Fe W/C159) Santa Fe W/C IS160) Sunset Clear W/C161) Sunset Flash R/T162) Sunset Flash Smooth163) Sunset Flash V/M164) Sunset Flash W/C165) Terra Cotta Bark166) Terra Cotta Red R/T167) Terra Cotta Red V/M168) Terra Cotta Red W/C169) University Blend Smooth170) University Blend Smooth Iron Spot171) University Blend V/M172) University Blend W/C

04 21 00-21

173) University Blend W/C Iron Spot174) Woodsfield Blend

6. Closure/Econo Size: 3-5/8 inch Wide by 3-5/8 inch High by 7-5/8 inch Long (92.1 mm Wide by 92.1 mm High by 193.7 mm Long).a. Face Brick: ASTM C 216 Grade: SW Type: FBS.b. Face Brick: ASTM C 216 Grade: SW Type: FBX.c. Colors:

1) As selected by the Architect from the range available within the allowance specified.

2) #41 W/C3) #41 Smooth4) #120 Red Rugg5) #1200 Monticello Blend6) #125 Cherry Bark7) #1252 Cardinal Blend8) #130 Red W/C9) #1300 Valley Blend10) #130-1 W/C11) #130-3 Mahogany W/C12) #130-6 Sorrell W/C13) #1303 Mahogany Flash W/C14) #1306 Sorrel Flash W/C15) #1310 Cherry Flash W/C16) #1348 Red Rough Tex Flash17) #138 Red R/T18) #1425 Buff Bark Flash19) #1445 Mission Blend20) #1448 Blush Buff Flash R/T21) #145 Red Vertex22) #1450 Red Vertex Flash23) #145-3 Mahogany Vertex24) #145-6 Sorrel Vertex25) #1520 Blush Buff Sand Face26) #1525 Buff Sand Face Flash27) #1545 Buff Vertex Flash28) #1546 Dark Blush Buff Vertex29) #1620 Red Sand Face30) #1625 Red Flash Sand Face31) #208 Smooth FR IS32) #225 Red Bark Flash33) #245 Blush Buff Rugg34) #300 White Birch Bark35) #325 Walnut Bark36) #340 White W/C37) #340-1 W/C38) #345 White Vertex39) #360 White Rugg40) #425 Blush Buff Bark Blend41) #443 Lite Blush Buff W/C42) #445 Blush Buff W/C43) #446 Darker Blush Buff Velvet44) #501 Cordovan W/C45) #520 Cordovan Sandface46) #525 Cordovan Rugg47) #545 Cordovan Vertex48) #610 Dark Red Smooth Iron Spot

04 21 00-22

49) #615 Red Smooth Full Range Iron Spot50) #717 Dark Smooth Iron Spot51) #721 Dark Smooth Full Range Iron Spot52) #7210 Dark W/C Full Range Iron Spot53) #806 Gray And White Bark Blend54) #825 Medium Gray/Brown Bark Blend55) #923 Light Gray Bark56) #925 Gray Bark Blend57) #926 Dark Gray Bark58) 49R Blend IS59) 85/15 W/C60) 85/15 Clear W/C61) 938 Light Gray W/C62) 940 Medium Gray W/C63) 942 Dark Gray W/C64) 938-1 Light Gray W/C65) 940-1 Medium Gray W/C66) 942-1 Dark Gray W/C67) Antique Red Flash V/M68) Autumn Blend Clear W/C69) Autumn Blend R/T70) Autumn Blend Smooth71) Autumn Blend V/M72) Autumn Blend W/C73) Autumn Rose Clear W/C74) Autumn Rose R/T75) Autumn Rose Smooth76) Autumn Rose V/M77) Autumn Rose W/C78) Aztec Red79) Bordeaux80) Briarcliffe81) Buckskin82) Burgundy Blend83) BW 50 R/T84) BW 50 V/M85) BW 50 W/C86) Canyon Blend R/T Full Range87) Canyon Blend R/T Lite Flash88) Canyon R/T89) Charcoal Gray90) Cherokee Blend V/M91) Chocolate R/T92) Chocolate R/T Full Range93) Chocolate Smooth94) Chocolate Smooth Full Range95) Chocolate W/C96) Chocolate W/C Full Range97) Cocoa98) Collegiate Red Flash V/M99) Colonial Brown100) Dark Red Flash W/C NB101) Dark Red Flash Smooth NB102) Dark Red Flash Bark103) Dark Red Flash V/M104) Dark Red Smooth

04 21 00-23

105) Desert Brown Smooth106) Desert Brown Flash Smooth107) Desert Brown W/C108) Desert Brown Flash W/C109) Desert Sage Smooth110) Desert Sage W/C111) Desert Sage Flash W/C112) Desert Tan Smooth113) Desert Tan Velvet114) Eau Claire115) Frisco Blend116) Harrison Range117) Harvest Blend118) Hoosier Blend119) Irish Gold120) Knox Blend121) Latrobe Blend W/C122) Lite Chocolate FL V/M (W.B.)123) Mohican Blend124) Monroe Blend125) Old English126) Olde Cheyenne127) Olde Harvard Smooth128) Olde Windsor129) Patent Black W/C130) Phoenix Red131) Pioneer Blend Smooth132) Pioneer Blend W/C133) Pioneer Blend W/C IS134) Pioneer W/C135) Red Bark Full Range136) Red Brush-Tex137) Red Brush-Tex Flash138) Red Smooth139) Red Smooth Full Range140) Red Smooth Iron Spot141) Red V/M142) Red V/M Full Range143) Red W/C Full Range144) Rose Mist145) Rustic Red146) Santa Fe R/T147) Santa Fe Smooth148) Santa Fe W/C149) Santa Fe W/C IS150) Sunset Clear W/C151) Sunset Flash R/T152) Sunset Flash Smooth153) Sunset Flash V/M154) Sunset Flash W/C155) Terra Cotta Bark156) Terra Cotta Red R/T157) Terra Cotta Red V/M158) Terra Cotta Red W/C159) University Blend Smooth160) University Blend Smooth Iron Spot

04 21 00-24

161) University Blend V/M162) University Blend W/C163) University Blend W/C Iron Spot164) Woodsfield Blend

7. Utility Size: 3-5/8 inch Wide by 3-5/8 inch High by 11-5/8 inch Long (92.1 mm Wide by 92.1 mm High by 295.3 mm Long).a. Face Brick: ASTM C 216 Grade: SW Type: FBS.b. Face Brick: ASTM C 216 Grade: SW Type: FBX.c. Colors:

1) As selected by the Architect from the range available within the allowance specified.

2) #41 W/C3) #41 Smooth4) #120 Red Rugg5) #1200 Monticello Blend6) #125 Cherry Bark7) #1252 Cardinal Blend8) #130 Red W/C9) #1300 Valley Blend10) #130-1 W/C11) #130-3 Mahogany W/C12) #130-6 Sorrell W/C13) #1303 Mahogany Flash W/C14) #1306 Sorrel Flash W/C15) #1310 Cherry Flash W/C16) #1348 Red Rough Tex Flash17) #138 Red R/T18) #1425 Buff Bark Flash19) #1445 Mission Blend20) #1448 Blush Buff Flash R/T21) #145 Red Vertex22) #1450 Red Vertex Flash23) #145-3 Mahogany Vertex24) #145-6 Sorrel Vertex25) #1520 Blush Buff Sand Face26) #1525 Buff Sand Face Flash27) #1545 Buff Vertex Flash28) #1546 Dark Blush Buff Vertex29) #1620 Red Sand Face30) #1625 Red Flash Sand Face31) #208 Smooth FR IS32) #225 Red Bark Flash33) #245 Blush Buff Rugg34) #300 White Birch Bark35) #325 Walnut Bark36) #340 White W/C37) #340-1 W/C38) #345 White Vertex39) #360 White Rugg40) #425 Blush Buff Bark Blend41) #443 Lite Blush Buff W/C42) #445 Blush Buff W/C43) #446 Darker Blush Buff Velvet44) #501 Cordovan W/C45) #520 Cordovan Sandface46) #525 Cordovan Rugg

04 21 00-25

47) #545 Cordovan Vertex48) #610 Dark Red Smooth Iron Spot49) #615 Red Smooth Full Range Iron Spot50) #717 Dark Smooth Iron Spot51) #721 Dark Smooth Full Range Iron Spot52) #7210 Dark W/C Full Range Iron Spot53) #806 Gray And White Bark Blend54) #825 Medium Gray/Brown Bark Blend55) #923 Light Gray Bark56) #925 Gray Bark Blend57) #926 Dark Gray Bark58) 49R Blend IS59) 85/15 W/C60) 85/15 Clear W/C61) 938 Light Gray W/C62) 940 Medium Gray W/C63) 942 Dark Gray W/C64) 938-1 Light Gray W/C65) 940-1 Medium Gray W/C66) 942-1 Dark Gray W/C67) Antique Red Flash V/M68) Autumn Blend Clear W/C69) Autumn Blend R/T70) Autumn Blend Smooth71) Autumn Blend V/M72) Autumn Blend W/C73) Autumn Rose Clear W/C74) Autumn Rose R/T75) Autumn Rose Smooth76) Autumn Rose V/M77) Autumn Rose W/C78) Aztec Red79) Bordeaux80) Briarcliffe81) Buckskin82) Burgundy Blend83) BW 50 R/T84) BW 50 V/M85) BW 50 W/C86) Canyon Blend R/T Full Range87) Canyon Blend R/T Lite Flash88) Canyon R/T89) Charcoal Gray90) Cherokee Blend V/M91) Chocolate R/T92) Chocolate R/T Full Range93) Chocolate Smooth94) Chocolate Smooth Full Range95) Chocolate W/C96) Chocolate W/C Full Range97) Cocoa98) Collegiate Red Flash V/M99) Colonial Brown100) Dark Red Flash W/C NB101) Dark Red Flash Smooth NB102) Dark Red Flash Bark

04 21 00-26

103) Dark Red Flash V/M104) Dark Red Smooth105) Desert Brown Smooth106) Desert Brown Flash Smooth107) Desert Brown W/C108) Desert Brown Flash W/C109) Desert Sage Smooth110) Desert Sage W/C111) Desert Sage Flash W/C112) Desert Tan Smooth113) Desert Tan W/C114) Eau Claire115) Frisco Blend116) Harrison Range117) Harvest Blend118) Hoosier Blend119) Irish Gold120) Knox Blend121) Latrobe Blend W/C122) Lite Chocolate FL V/M (W.B.)123) Mohican Blend124) Monroe Blend125) Old English126) Olde Cheyenne127) Olde Harvard Smooth128) Olde Windsor129) Patent Black W/C130) Phoenix Red131) Pioneer Blend Smooth132) Pioneer Blend W/C133) Pioneer Blend W/C IS134) Pioneer W/C135) Red Bark Full Range136) Red Brush-Tex137) Red Brush-Tex Flash138) Red Smooth139) Red Smooth Full Range140) Red Smooth Iron Spot141) Red V/M142) Red V/M Full Range143) Red W/C Full Range144) Rose Mist145) Rustic Red146) Santa Fe R/T147) Santa Fe Smooth148) Santa Fe W/C149) Santa Fe W/C IS150) Sunset Clear W/C151) Sunset Flash R/T152) Sunset Flash Smooth153) Sunset Flash V/M154) Sunset Flash W/C155) Terra Cotta Bark156) Terra Cotta Red R/T157) Terra Cotta Red V/M158) Terra Cotta Red W/C

04 21 00-27

159) University Blend Smooth160) University Blend Smooth Iron Spot161) University Blend V/M162) University Blend W/C163) University Blend W/C Iron Spot164) Woodsfield Blend

8. 8X8 Size: 3-5/8 inch Wide by 7-5/8 inch High by 7-5/8 inch Long (92.1 mm Wide by 193.7 mm High by 193.7 mm Long).a. Face Brick: ASTM C 216 Grade: SW Type: FBS.b. Face Brick: ASTM C 216 Grade: SW Type: FBX.c. Colors:

1) As selected by the Architect from the range available within the allowance specified.

2) #41 W/C3) #41 Smooth4) #120 Red Rugg5) #1200 Monticello Blend6) #125 Cherry Bark7) #1252 Cardinal Blend8) #130 Red W/C9) #130-1 W/C10) #130-3 Mahogany W/C11) #130-6 Sorrell W/C12) #138 Red R/T13) #145 Red Vertex14) #145-3 Mahogany Vertex15) #145-6 Sorrel Vertex16) #1520 Blush Buff Sand Face17) #1546 Dark Blush Buff Vertex18) #1620 Red Sand Face19) #1625 Red Flash Sand Face20) #208 Smooth FR IS21) #245 Blush Buff Rugg22) #300 White Birch Bark23) #325 Walnut Bark24) #340 White W/C25) #340-1 W/C26) #345 White Vertex27) #360 White Rugg28) #425 Blush Buff Bark Blend29) #443 Lite Blush Buff W/C30) #445 Blush Buff W/C31) #446 Darker Blush Buff W/C32) #501 Cordovan W/C33) #520 Cordovan Sandface34) #525 Cordovan Rugg35) #545 Cordovan Vertex36) #610 Dark Red Smooth Iron Spot37) #615 Red Smooth Full Range Iron Spot38) #717 Dark Smooth Iron Spot39) #721 Dark Smooth Full Range Iron Spot40) #7210 Dark W/C Full Range Iron Spot41) #806 Gray And White Bark Blend42) #825 Medium Gray/Brown Bark Blend43) #923 Light Gray Bark44) #925 Gray Bark Blend

04 21 00-28

45) #926 Dark Gray Bark46) 49R Blend IS47) 85/15 W/C48) 85/15 Clear W/C49) 938 Light Gray W/C50) 940 Medium Gray W/C51) 942 Dark Gray W/C52) 938-1 Light Gray W/C53) 940-1 Medium Gray W/C54) 942-1 Dark Gray W/C55) Autumn Blend Clear W/C56) Autumn Blend R/T57) Autumn Blend Smooth58) Autumn Blend V/M59) Autumn Blend W/C60) Autumn Rose Clear W/C61) Autumn Rose R/T62) Autumn Rose Smooth63) Autumn Rose V/M64) Autumn Rose W/C65) Aztec Red66) Bordeaux67) Briarcliffe68) Buckskin69) Burgundy Blend70) BW 50 R/T71) BW 50 V/M72) BW 50 W/C73) Canyon Blend R/T Full Range74) Canyon Blend R/T Lite Flash75) Canyon R/T76) Charcoal Gray77) Chocolate R/T78) Chocolate R/T Full Range79) Chocolate Smooth80) Chocolate Smooth Full Range81) Chocolate W/C82) Chocolate W/C Full Range83) Cocoa84) Dark Red Flash W/C NB85) Dark Red Flash Smooth NB86) Dark Red Flash Bark87) Dark Red Flash V/M88) Dark Red Smooth89) Desert Brown Smooth90) Desert Brown W/C91) Desert Sage Smooth92) Desert Sage W/C93) Desert Tan Smooth94) Desert Tan W/C95) Harrison Range96) Harvest Blend97) Hoosier Blend98) Knox Blend99) Latrobe Blend W/C100) Lite Chocolate FL V/M (W.B.)

04 21 00-29

101) Patent Black W/C102) Phoenix Red103) Pioneer Blend Smooth104) Pioneer Blend W/C105) Pioneer Blend W/C IS106) Pioneer W/C107) Red Bark Full Range108) Red Brush-Tex109) Red Brush-Tex Flash110) Red Smooth111) Red Smooth Full Range112) Red Smooth Iron Spot113) Red V/M114) Red V/M Full Range115) Red W/C Full Range116) Rustic Red117) Santa Fe R/T118) Santa Fe Smooth119) Santa Fe W/C120) Santa Fe W/C IS121) Sunset Clear W/C122) Sunset Flash R/T123) Sunset Flash Smooth124) Sunset Flash V/M125) Sunset Flash W/C126) Terra Cotta Bark127) Terra Cotta Red R/T128) Terra Cotta Red V/M129) Terra Cotta Red W/C130) Woodsfield Blend

9. Meridian Size: 3-5/8 inch Wide by 3-5/8 inch High by 15-5/8 inch Long (92.1 mm Wide by 92.1 mm High by 396.9 mm Long).a. Face Brick: ASTM C 216 Grade: SW Type: FBS.b. Face Brick: ASTM C 216 Grade: SW Type: FBX.c. Colors:

1) As selected by the Architect from the range available within the allowance specified.

2) #41 W/C3) #41 Smooth4) #130-1 W/C5) #340-1 W/C6) 85/15 W/C7) 85/15 Clear W/C8) 938-1 Light Gray W/C9) 940-1 Medium Gray W/C10) 942-1 Dark Gray W/C11) Autumn Blend Clear W/C12) Autumn Blend Smooth ES13) Autumn Blend W/C ES14) Autumn Rose Smooth ES15) Autumn Rose W/C ES16) Briarcliffe17) Buckskin18) Burgundy Blend19) BW 50 W/C20) Charcoal Gray

04 21 00-30

21) Chocolate Smooth22) Chocolate Smooth Full Range ES23) Chocolate W/C24) Chocolate W/C Full Range ES25) Cocoa26) Colonial Brown27) Dark Red Flash W/C NB28) Dark Red Flash Smooth NB29) Dark Red Flash V/M30) Dark Red Smooth ES31) Eau Claire32) Frisco Blend33) Harrison Range34) Hoosier Blend35) Knox Blend36) Latrobe Blend W/C37) Mohican Blend38) Monroe Blend39) Olde Harvard Smooth40) Olde Windsor41) Pioneer Blend Smooth ES42) Pioneer Blend W/C ES43) Pioneer W/C44) Red Smooth45) Red Smooth Full Range ES46) Red W/C Full Range ES47) Rose Mist48) Rustic Red49) Santa Fe Smooth ES50) Santa Fe W/C ES51) Sunset Clear W/C52) Sunset Flash Smooth ES53) Sunset Flash W/C ES54) Terra Cotta Red W/C55) University Blend Smooth56) University Blend W/C57) Woodsfield Blend

B. Building Brick: ASTM C 62: Solid units.1. Grade NW for interior and backup areas.2. SW when in contact with earth.3. MW exterior and backup areas.

C. Fire Brick: ASTM C 1261.

2.3 ACCESSORlES

A. Reinforcing Bars:1. Billet Steel Deformed Bars: ASTM A 615.2. Rail Steel Deformed Bars: ASTM A 616 or A 996.3. Axle Steel Deformed Bars: ASTM A 617 or A 996.4. Epoxy Coated Billet Steel: ASTM A 615 and ASTM A 775.

B. Corrugated Ties: ASTM A 1008, 20 Gage, Width: __________ inch, length: ___________ inches, Galvanized: ASTM A 153, Class B-2.

C. Truss Joint Reinforcement: ASTM A 82 (ASTM A 666), Size________, Galvanized: ASTM A

04 21 00-31

153, Class B-2.

D. Ladder Joint Reinforcement: ASTM A 82 (ASTM A 666), Size________, Galvanized: ASTM A 153, Class B-2.

E. Wire Wall Ties: ASTM A 82, Wire Size: ________, Shape: ________, Length: ________ inches, Galvanized: ASTM A 153, Class B-2.

F. Dovetail Anchors: ASTM A 1008, Gage: ______, Length: _______ inches, Galvanized: ASTM A 153, Class B-2.

G. Anchors:1. Plate Bent Bar Anchors: ASTM A 36, Diameter: ________inch, Length: ________

inches, Galvanized: ASTM A 153, Class B-2.2. Plate Header Bar Anchors: ASTM A 36, Diameter: ________ inch, Length: ________

inches, Galvanized: ASTM A 153, Class B-2.

H. Flashing:1. Copper: ASTM B 370, 5 oz.2. Copper: ASTM B 370, 7 oz.3. Stainless Steel: ASTM A 666, Grade_______, Type 304.4. Plastic: PVC, 30 mils (0.75 mm) thick.5. Combinations:

a. Plastic/Copper: 5 oz.b. Cooper/Fabric: 5 oz.c. Asphalt-Coated Copper: 5 oz.d. Plastic/Copper: 7 oz.e. Cooper/Fabric: 7 oz.f. Asphalt-Coated Copper: 7 oz.

I. Preformed Control and Expansion Joints:1. Premolded Foam: ASTM D 1056, Type 2, Class A, Grade 1.2. Neoprene: ASTM D 1056, Type 2, Class A, Grade 1.3. Backer Rod: Extruded, Closed Cell Polyethylene.

J. Weep holes:1. Rope Wicks: Cotton Sash Cord, 12 inches long with end laid in cavity.2. Plastic Tubes: 1/4 inch (6 mm) minimum inside diameter by 4 inches (102 mm) long.3. Aluminum Weep/Vents.4. Plastic Weep/Vents.

K. Mortar and Grout: As specified in Section 04 05 13 - Masonry Mortaring.

L. Nailing Strips: Specified in Section 06 11 00 - Wood Framing.

M. Steel Lintels: Size as indicated on Drawings and as specified in Section 05 50 00 - Metal Fabrications.

PART 3 EXECUTION

3.1 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. Verify items provided by other sections of work are properly sized and located.

C. Verify built-in items are in proper location, and ready for roughing into masonry work.

04 21 00-32

D. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

A. Clean surfaces thoroughly prior to installation.

B. Direct and coordinate placement of metal anchors supplied to other sections.

C. Furnish temporary bracing during installation of masonry work. Maintain in place until building structure provides permanent support.

D. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

A. Install in accordance with ANSI A41.1 Building Code Requirements for Masonry, ANSI A41.2 Building Code Requirements for Reinforced Masonry or equivalent sections of the applicable Code.1. Establish lines, levels, and coursing indicated. Protect from displacement.2. Maintain masonry courses to uniform dimension. Form bed and head joints of uniform

thickness.3. Coursing of Brick Units: Lay masonry in bond pattern as indicated on Drawings4. Do not shift or tap masonry units after mortar has achieved initial set. Where

adjustment is required, remove mortar and replace.5. Perform job site cutting of masonry units with proper tools to assure straight, clean,

unchipped edges. Prevent broken masonry unit corners or edges.6. Isolate masonry from vertical structural framing members with movement joint as

indicated on Drawings.7. Isolate top of masonry from horizontal structural framing members and slabs or decks

with compressible joint filler.

B. Tooling and Pointing:1. Joint Profile: Tool mortar joints to a concave appearance.2. Joint Profile: Tool mortar joints to a concave V-shaped appearance.3. Joint Profile: Tool mortar joints to a concave grapevine appearance.4. Tool exposed joints when "thumb-print" hard.5. Flush cut all joints not tooled.6. When pointing, rake mortar joints to a depth of not less than 1/2 inch (12 mm). Fill

solidly with pointing mortar. Tool joints.

C. Masonry Flashings:1. Clean surface of masonry from projections that might puncture flashing.2. Place through-wall flashing on bed of mortar.3. Cover flashing with mortar.4. Lap flashing a minimum of 6 inches (152 mm).5. Leave flashing project from face of wall approximately 1/4 inch (6 mm) to form a drip.

Flashing shall be cut back to the face of the wall after inspection, if the drip is deemed objectionable by Architect.

D. Weeps:1. Provide weep holes in head joints of the first brick course immediately above flashing

by placing weeps no more than 24 inches (610 mm) on center horizontally.2. Keep cavity free from mortar.

E. Expansion and Control Joints: Provide where indicated on the Drawings.

04 21 00-33

1. Keep clean from all mortar and debris.2. Install neoprene pre-molded foam pad.3. Install backer rod.4. Install sealant as specified in Section 07 90 00 - Joint Protection.

3.4 CLEANING

A. Remove excess mortar and mortar smears as work progresses.

B. Replace defective mortar. Match adjacent work.

C. Clean soiled surfaces with cleaning solution.

D. Use non-metallic tools in cleaning operations.

3.5 PROTECTION OF FINISHED WORK

A. Protect exposed external corners subject to damage.

B. Protect base of walls from mud and mortar splatter.

C. Protect masonry and other items built into masonry walls from mortar droppings and staining caused by mortar.

D. Protect tops of masonry work with waterproof coverings secured in place without damaging masonry. Provide coverings where masonry is exposed to weather when work is not in progress.

END OF SECTION

04 21 00-34