Web Publishing Rule on ISA 2004This procedure will help you to publish a web site using ISA 2004 or later versions.Scenario we have a web site located on a web server !ro" the internal networ#. We want to publish it on a public IP Address$ so anyone !ro" everywhere "ay access the site.%onsidering that you already have the Web Site createdwe go straight&through creating the rule on ISA server.Step 1%reate a new rule 'o to (icroso!t ISA Server and clic# Action->New-> Web Server and Publishing Rule Step 2'ive it a suggestive na"e and clic# Next Step 3 Select Allow and clic# NextStep ! Speci!y the Web Server on with your Web Site is locatedI! you have "ultiple web sites hosted on the sa" server$ you "ust give the e)act path !or your website. Write it in the Path *eldStep " Select the do"ains that will have access to the web site in our case select An# $o%ain because we want everyone to have access to the websiteStep & %reate a 'istener to listen !or inco"ing connection select New and give ita suggestive na"e then clic# NextStep ( Select the networ#+networ#s !or wich the listener will listen%lic# on Address-> Speci)ed *P address on the *SA Server co%puter in the selected networ+.Select a unused public ip address and clic# Add. This will be the public IP !or the website.Step , Speci!y the port that the ISA Server will use to listen on the selected IP address !or inco"ing connectionsI! you have a security certi*cate you "ust enable SS, and select the certi*cate%lic# Next -> -inishStep . %lic# Next and select the users that will have access to the web site. In our case is All /sers%lic# Next-> -inishStep 10 -ouble %lic# the rule Step 11 In the action tab select AllowStep 12 In the -ro% tab select An#where or add speci*c locations that will access the websiteStep 13 In the 1o tab speci!y the IP address o! the server to publishStep 1! In the 2ridging tab select the port to redirect the re.uests