Powerful efficiency. Cost savings. Totally flexible.

FEED the FormEr™

FEED the FormEr™ automated transfer systems bridge the gap, safely and efficiently moving your raw material to the further processing equipment while reducing manual touch points. This intelligent, totally flexible use of automation allows you to improve efficiency, increase capacity and enhance food safety, all while saving you time and money.

Adding value through automation

The industry demands efficiency, and processors like you are consistently being asked to produce more with fewer resources while maintaining the highest standards in food safety. our newest offering has been designed with these important concerns in mind. The Provisur® family of proven brands has the expertise and offerings to build and calibrate an integrated system that works for your operation. Introducing FEED the FormEr™, a flexible material handling system that automates the process of transferring product to the next stage of processing. Taking out the manual labor step and removing the associated carts and equipment saves money, improves yields, and increases production while enhancing food safety.

Improved yields

With no carts to worry about, there’s no spillage from moving and dumping product, and no product left inside the carts or spilled on the floor means less waste.

Increased production

removing human intervention allows you to optimize run time. You’ll have a much more efficient transfer by removing traffic flow obstacles, allowing consistent, quicker on-time delivery of the raw material.

Enhanced safety

manual intervention and carts are two big risk points for food safety and sanitation. Cross-contamination of raw material and production runs can come from material left in carts, so eliminating them will enhance the safety of your line. FEED the FormEr has also been designed to make sanitation easier.

Cost savings

With the elimination of manual labor to move product into your former, you’ll no longer have all of the time and costs associated with carts, including reduced sanitation time and lower potential for injury. In addition, consistent flow rates reduce wear on downstream equipment. This leads to improved uptime and lower cost for you.

Flexible, intelligent design

We’ve done our research on how to improve your line and add value through this automated process so that we could build in the features you want most. That’s our promise. Weiler® FEED the FormEr. Adding value through automation.

Feature Benefit

Removable Wear StripsNo conveyor bed; less surface contact; easier to clean

Drop Down Sides Easy access to belt for sanitation

Lugged Belt Positive drive and reliable tracking

Belt Guides Self aligning belt

Frame Construction Open for optimum sanitation

Minimal Surface To Surface Contact

Sanitary design; easy to clean

Belt Rides Under Adjustable Side Panels

Minimizes product spillage and belt fraying

Plastic Belt Return No moving parts; sanitary; maintenance free

Gravity Tensioned Belt Wipe

No residual raw material on belt; improved yields

Rubber Lagged/Seamless Motorized Pulley

Extremely clean and sanitary drive system

Gate Kick Stands Easy access to bottom side of gate

FEED the FormEr™

• Built Weiler® tough: FEED the FormEr is built with the same high quality material handling design features you’ve come to expect from Provisur® equipment.

• Multiple applications: The system can handle almost any raw material, including beef, pork and chicken, feeding a number of pieces of further processing equipment such as formers, stuffers, pumps or holding hoppers.

• Unique diverter gates: We’ve designed the diverter gates with a unique curvature that allows higher capacity and flow rates and virtually eliminates meat stoppage and blockage.

• Food safety improvements: The sanitary design reduces risks associated with safety and sanitation.

• System automation: The user-friendly controls are automated for hopper monitoring and prioritized product delivery between the preparation line and further processing equipment.

• Designed for you: FEED the FormEr can be tailored to your specific application and processing needs, regardless if you are installing a new line or need to retrofit into an existing line and process. The option to use conveyors or pumps gives flexibility in the design process so that the equipment can be tailored to fit your needs.

• Enhanced ROI: Even with all of the exceptional features, FEED the FormEr cost of ownership is low, ensuring the health of your bottom line.

• Support to get you going: We offer turnkey project management and general contractor capabilities to be sure you get the support you need to get FEED the FormEr working for you.

• Two-step validation: To be sure your FEED the FormEr meets your needs, we use optiline® to validate proof of concept, then the Factory Acceptance Test validates fit and function.

Quality comes first.

Processors around the world are increasingly choosing high quality Weiler® equipment and systems. our flexible, intelligent design improves yields, increases production, and enhances food safety, all with a lower cost of ownership. The Weiler way is to keep your line running at maximum efficiency for the best performance.

The Provisur® Technologies family of proven brands, including Am2C®, Beehive®, Cashin®, Formax®, multitec™, TST™ and Weiler®, offers a complete platform for food processing equipment including integrated systems, grinding, mixing, separating, forming, coating, cooking, freezing, slicing and autoloading equipment for processing beef, poultry, pork, fish, and other food products.

For more information:

Integrated Systems Grinding & Mixing Separating Forming Coating Cooking Freezing Slicing Autoloading

AM2C® Beehive® Cashin® Formax® multitec™ TST™ Weiler®

©2014 Provisur Technologies, Inc.

USA

1116 East main Street, Whitewater WI 53190

Tel: 262-473-5254 Fax: 262-473-5867 E-mail: weilerinfo@provisur.com

UK

Unit 60 Waverly road, The Beeches Industrial Estate, Yate, Bristol BS37 5Qr England

Tel: +44 (0) 1454-320900 Fax: +44 (0) 1454-326262 E-mail: weilerinfo@provisur.com

The Netherlands

Schipholweg 315, 1171 PL Badhoevedorp (near Amsterdam)

Tel: +31 20-6590800 Fax: +31 20-6590801 E-mail: eu.info@provisur.com

South America Alameda Venus, 289 American Park Empresarial Nr, Indaiatuba, SP 13347-659 Brazil

Tel: +55 (19) 3935-3177 Fax: +55 (19) 3936-2148 E-mail: sa.info@provisur.com

Asia Pacific

11th Floor, Thaniya Building (BTS Wing), 62 Silom road, Bangrak Bangkok 10500 Thailand

Tel: +66 (0) 2652 3050 to 51 Fax: +66 (0) 2652 3052 E-mail: ap.info@provisur.com