We specialize in manufacturingprecision pumps for ­

industrial applications

" I Quick ShipmentsRanger's Quick Ship Program isstandard - no additional costs .

Made in the USARanger, Inc. manufactures a precisionbuilt helical gear pump for industrialapplications. The capacity range isavailable from 25 GPM to 360 GPM

and pressures to 125 PSI. Both lowviscosity and high viscosity liquidscan be efficiently pumped. Viscositiesof upwards to 1,000,000 SSu can behandled. Built-in gear reducers withseveral gear ratio's are available as astandard option.

Quality_I Ranger's quality assurance program

continuously promotes top qualityproducts.

Value

RANGER, INC.6400 Shelby View Dr., Suite 110Memphis,TN 38134

,...\800-264-4115 Toll Free901-388-1257 Office901-388-0470 Fax

.••..

Ranger offers quality, service, and" I value as a winning combination.

-

-..••.

\

_______________________________________________ r .I.

Ranger Close-Coupled GearReduction Option (G8)This series of Ranger pumps is designed to operate at reduced motor speeds.

This allows the pump to operate equally well for both high and lowviscosity liquids. Low pump speeds also increase pump life. Ranger

gear boxes are self contained with oil lubricated anti friction bearings andhardened steel gears standard for maximum sever duty. One gear box has

three interchangeable ratios that fit the 11, 17, and 22 Series pumps.

The charts on this page are intended as a guide only. All the applicationfactors must be considered to select the correct pump and reduction speed.

Other factors include temperature, liquid characteristics and inlet conditions.

Ranger gear boxes are not intended for the Series 48. Speeds shown forthe 48 Series are for reference with independent gear reductions. Contact Rangerfor information.

Typical Liquids/Viscosity List- (APPROXIMATE VISCOSITY RANGE SHOWN IN SSU @ 75°P/24°C)

30 to 100 100 to 250 250 to 800 800 to 2,500• Alcohols • SAE #5 Oil • SAE #10 Oil • SAE #20-30 Oil

• Gasoline • Com Oil • Soybean Oil • Paint Primer

• Turpentine • Olive Oil • Light Crude • Spar Varnish

MOTORI GEAR

PUMPMAXIMUMRPM

RATIORPMPERMISSIBLE HP

4.60:1

250 5.5

11 I

11503.94:1290 6.5

through

3.20:1360 8.0

224.60:1380 8.5

17503.94:1445 10.0

3.20:1545 10.0

3450

4.60:1750 10.0

2,500 to 8,000• SAE 40# Oil

• Heavy Turbine Oil• Enamel Paint

8,000 to 25,000• SAE #50 Oil• Ink

• Heavy Crude

25,000 to 75,000

• Asphalt• Shampoo• Gear Lube

75,000 to 300,000• Tar• Molasses• Chocolate

Note: Do not exceed maximum allowable HP shown

Series 11 11 gallons per revolutionSeries 17 17 gallons per revolutionSeries 22 22 gallons per revolutionSeries 48 52 gallons per revolution

SERIES RPM250 RPM290 RPM360 RPM380 RPM445 RPM545 RPM750 RPMPumD

PSISSU30100100010000301001000100003010010001000030100100010,00030100100010,00030100100010,00030100100010,000

11 f

GPM25262727293031313738393940414242474849 585960 80818225

HP.7.7.91.3.9.91.21.51.11.11.42.21.11.11.52.31.41.42.0 1.91.92.7 2.82.83.8

GPM

23252727272931313537393938404242454749 565860 788082

11<50

HP1.11.11.31.71.31.31.51.91.71.72.02.81.71.72.12.92.12.12.6 2.72.73.5 3.93.94.9GPM

232627 273031 35383933384142404548 515659 737881

11 l 100HP 1.92.12.5 2.22.43.0 2.83.13.92.92.93.34.13.53.54.0 4.44.45.2 6.3R.~7.~

11

GPM222627 263031 343839 374142 4448 485559 707781125

HP 2.22.42.8 2.72.93.5 3.33.64.4 3.53.94.7 4.24.7 5.45.46.2 7.57.58.5

17 f

GPM38404142454748495759606160626364717374 889091 123125126

25

HP.8.81.11.81.01.01.32.21.21.21.83.01.31.31.93.31.71.72.5 2.32.33.6 3.53.56.0GPM

33384142404548495257606155606364667174 838891 118123126

17 <50

HP1.41.41.72.41.61.61.92.82.12.12.73.92.32.32.94.32.92.93.7 3.83.84.9 5.45.47.9

17 l GPM344041 4147484953596052566263636773 808490 115119125

100HP 2.62.93.6 3.03.34.23.83.84.45.64.24.24.86.25.05.05.8 6.36.37.6 9.09.011.5

17

GPM3941 46484951586052546163636572 808289 115117124

125

HP 3.44.1 4.04.94.64.65.26.45.05.05.67.06.06.06.8 7.57.58.8 10.810.813.3

22 f

GPM52535555606163637677797980818383949597 116117119 16216316525

HP111.11.41.91.~1~1.72~20202R~90000~n,,~0707~" ~o~o" ""70

GPM

50525455586062637476787978808283929496 114116118 161162164

22 <~O•..•Donon0">OR0">0">o~">">1">1">7"n">">">">.1"""'""0 "R"R~n 7">7">0"

GPM

44505355525861636874777972788183869295 108114117 154160163

22 l 1nn•..•D">~">~">R,,">42424~~~~4~4RO7~~7~7R~7RRRRR7R R2R204 1201201,41

GPM

495355505761636673777970778183849195 106113117 152159163

22 125HP 4.24.55.05.25.25.56.36.56.57.18.46.96.97.79.08.38.39.1 10.210.211.4 14.714.716.8

SERIES

RPM250 RPM300 RPM350 RPM400 RPM500 RPM600 RPM700 RPMPumD

PSISSU30100100010000301001000100003010010001000030100100010000301001000100003010010001000030100100010000

f

GPM118122127129140142146150164167171175189192196200249251256259294297302305348352358360

48 2~HP~R40424R4~4~~~R~~O~5RO70R1~RRn1nnRanl,n a1~ R1n11I '" ~1a 0'"'"I'R 0o~ 0

GPM

98102118123123130139143148150163164172180189194232240248254277287293299 340348354

48 ~oHP""a~~70~.~oR">a77">7Ra"1n aaR1n'11 "1">~1?1? ,114 R17~1~1R11R a??~ 1aI?">R?R R

lGPM 102114 122134 148159 172185 210222246 240277289 322344

48 1MHP RR1n R 12 ~1~~ 14 R1R 0 17 ~10 ~ 20212212~0 2~01270~1R I ~~.~404

GPM

108130155162180 235243 267285 355

48 125HP 12.217.018.620.122.1 25.528.5 32.436.0 47.0

VERSATILITY • THICK-N-THIN • BLENDING • MIXING • TRANSFERSOLVENTS • MOLASSES • GASOLINE • RESINS • OIL • ASPHALT • CHEMICALS

Stuffing BoxRanger Pumps can be supplied as standard with stuffingbox packing or single mechanical seals. They can beeasily converted from one arrangement to the other.Several types of both packing and seals are available forvarious applications; for example - high temperatures orcorrosive conditions. Contact Ranger for applicationassistance.

Maximum Pump Ratings125 PSI (862 KPA) maximum inlet and discharge pressure750 RPM maximum. (See speed vs. viscosity curve formaximum RPM).

350°F (177°C) maximum temperature for standardpacking.212°F (lOO°C) maximum temperature for BUNA-Nmechanical seal

400°F (204°C) maximum temperature for Vitonmechanical seal

Consult Ranger for any application over 350°F (I 77°C)

Standard Fitted Materials of ConstructionHousing & Backplates ASTM A 48 Options

Class 30 Cast Iron

Iron AlloyCarbon SteelBronze

GearsShafts

Bearing Bushings

R.V. Parts, Gaskets

Hardware

Carbon SteelFiberZinc Plated Steel

440 Stainless SteelCarbonIron

TFE/GraphiteStainless SteelAluminum MECHANICAL SEAL

Read Installation, Operation, andMaintenance Manual before

installing, performing maintenance,or operating a Ranger Pump,

Construction Advantages• Positiveshaftand gear supportwith four internalbearings• Dowelpins insurepositivepumpalignment• Hardenedgearsand shaftsfor longservicelife• Intregalspeedreduceravailableas option• Field adjustablereliefavailable• FabricationoptionsincludeBase,Coupling,

and Drives

Optional Direction of RotationEI II EI Disc,harge IIEI

Discharge

Field Adjustable Relief ValveA relief valve is needed for the pump system to protect

the pump from over-pressure. The valvecan be positioned to provideprotection for thedischarge. *A high pressure spring isavailable to give a full rangeof relief settings.

'See Installation, Operation and Maintenance Manual for details

Discharge

Identifying Direction of Rotation MountingHi-Drive PumpsY: Clockwise Rotation W: Clockwise RotationZ: Counterclockwise Rotation X: Counterclockwise Rotation

Piping DirectionPiping direction is determined when facing the drive shaft. These diagrams will serve as a helpful basis for you to determine the direction ofrotation wanted according to your piping system.

La-Drive PumpsLY: Clockwise RotationLZ: Counterclockwise Rotation

Rotation is determined byfacing the end of driveshaft

LW: Clockwise RotationLX: Counterclockwise Rotation

(gcw

Ranger PumpsPump Identification

9 - Ports 90°8 - Ports 180°

11 --.11 Gallons per rev.17 - .17 Gallons per rev.22 - .22 Gallons per rev.48 --.48 Gallons per rev.

HB - Outboard bearingHH - Pump with hydraulic adaptor and rigid couplingBH - Replacement pump for HH Pump without adaptorGO - Replacement pump for GHB uni(without gear reductionGB - Pump with gear reduction

RV - Relief valveNo letter - No relief valve

IC - Carbon graphite bushing

X - or no letter bronze bushingT - TFE & graphite bushingI - Iron BushingH - Hi Temperature bronze bushing

G - TFE & graphite packingr X - or no letter - standard packingT - Pure TFE packing

229 P H B F R V LX - sse G D - DSA 8093 packingC - Carbon/Graphite packingIT ----C:::-ss -Stainless steel shafts

No letter or XX - Steel shafts

Rotation & Shaft position (See Installation Manual pg. 4)No letter - W position (See Installation Manual pg. 4)

F - FlangeNo letter - Pipe port

P - PackingM - Mechanical Seal

t1" DIA. SHAFT 6.44

x 1/4" Key (164)i

l~~~)l3.5(89)

1 I.I11.00 .' ~ --.

(280) . "f • 5.00 .I (127) -...

j; : O~-L DIA THRU 4 PLACE~j 0.75. (19)

0.75 5.50

(19) (14)

L1.75

(45)

1" DIA. SHAFT

x 1/4" Key

f6.44(164)!

25.00

(635)23.50

597) 15.00

'381'J

3.00

(76)

SERIES HBRV bbbL4119P -119M

22.8821.253.7513.50

(581)(540)(95)(343)

179P - 179M

23.6322.003.1314.25(600)

(559)(80)(362)

XX.XX = DIM. IN INCHES

(XXX) = DIM. IN MM.

SERIES 229P - 228M HBFRVXX.XX = DIM. IN INCHES

(XXX) = DIM. IN MM.

4.08(102)

DISTRIBUTED BY:

1.91(49)5.14

(131)

v.vV

eiil

~ Example: 22 Series1-

",fl pwnp turning at--f--

,/500 rpm would _,,_+ __

produce a flow of '--.v 1110 gpm Igallonspelf""rte) _

./ • s~fl ~';~- -/'

--~- - - .;.--f-<:'""- - -- ----S"'-~\"

§--

---).I----- _!-"" ..~ie~-- -.

48 - 4" Pump 17 - 2'/2" Pump ~22 - 3" Pump 11 - 2" Pump ('J

40038036034032030028026024022020018016014012010080604020

o200 250 300 350 400 450 500 550 600 650 700 750

RPM Max RPM

Based on 50 P.S.I., 100 SSU

::;;"­('J

40038036034032030028026024022020018016014012010080604020

o

Approximate Flow Rates<::'

~u;2:.:J

1514143813631287121111351060

98490883375768160653045437830322715176

o

3.15

(80).063

(16)

6.00 I- 1 HI-DRIVE(152)

0.69 DIA THRU 4 PLACES(17)

SERIES 48

1.25

(32)