alfadisplatforms.com info@alfadisplatforms.com Alfadis PlatformsBoulevard Industriel 99B - 7700 Mouscron +32 56 85 62 09

We make you reach higher...

Alfadis Platforms offers a range of pneumatic, hydraulic and electrical platforms for your surface treatment problem.

pneumatic, hydraulic or electric / ATEX - zone 2 / easy movement / height improves productivity & security / CE-approved / 3 dimensions / Belgiumbetter quality / freed from obstacle / less maintenance / built-on-demand no contact with floor / ergonomic / retrofit / 2 persons / access platforms

Alfadis designs and produces platforms upon request according to the wishes of our customers. Together with our engineer-ing office we develop new platforms that solve the challenges of the customer and still meet the high standards.

Alfadis Platforms

Our pneumatic platforms are easy to operate, which allows them to move 3 dimensional. The results are better quality, more efficiency and an improved working environment, that leads to direct cost savings. They can be used in painting booths and oth-er hazardous areas.

Our range of hydraulic platforms are hydro- electrically driven. They are designed for more demanding environments. They are bigger, higher and extend even further. The platform elevates and carries a worker with tools to a specific height. These platforms are built on de-mand.

Electrical platforms have their own set of advan-tages where hydraulic or pneumatic models offer no solution. Energy is sup-plied by means of a cabling chain. The platforms can also be used in explosive atmospheres (ATEX 2 cat. 3G/D). Electrical platforms are built on demand.

for more information call today on +32 56 85 62 09, visit

alfadisplatforms.com or send an e-mail to info@alfadisplatforms.com

PNEUMATICPLATFORMS

HYDRAULIC PLATFORMS

ELECTRICAL PLATFORMS ON DEMAND

Alfadis Platforms3

ALFADIS PLATFORMS OFFERS PLATFORMS FOR ALL APPLICATIONS IN SURFACE TREATMENT WITH A MORE ADVANCED DESIGN AND A HIGHLY PROFESSIONAL APPROACH

Advanced design.

3D platforms for use in painting booths.

Hazardous environments.

CE- & GOST approved.

Replaces unstable ladders and scaffolds.

Improved quality and efficiency for paint or other surface treatment jobs.

Return on investment can be less than two years.

Faster, safer application, sanding, blasting, masking or inspection.

3D movement in total security.

Environment is clear and freed from obstacle.

ATEX-zone 2 version available.

Alfadis Platforms5

Advantages

Why platforms?

Approval and standards

General

The Alfalift does not only meet all requirements related to security of platforms but also all regulations

concerning hazardous environments.

The platforms are CE-approved by an European notified body and are originally designed for use in explosion risk environment (ATEX Zone 2 Cat. 3G or 3D). Each platform is engineered with the applicable safety legislation, including several safety measurements.

The main advantages of the Alfalift are:

• Improved working environments with increased safety and productivity.

• Ideal for hazardous and very demanding environments.

• Cost effective solution with improved and quality finishes (i.e., painting booths).

• Simple installation.• Controls and air supply point included inside

the cage.

Approval and standards

Alfadis Platforms6

Domains

Our range of platforms can be used in several areas where easy height access is acquired.

Preparation boothZinc spraying booth

Powder booth

Degreasing booth

Painting booth

Blasting booth

Alfadis Platforms7

HX Alfalift pneumatic platforms are pneumatically operated

access platforms. They are ideal for hazardous environments. These units are manufactured in a standard or customised design. The control is 3D and improves the safety and efficiency during many applications where easy height access is required. The installation is simple and little maintenance is needed. These devices will increase profitability, operator’s well-beiing, productivity and is one cost-effective solution to many tasks. Each Alfalift HX comes with a compressed air connection.

Pneumatic platforms can be fully utilised in painting booths. If mounted on side-walls, it can increase access for the entire workspace and

ultimately leave the floor free from obstacles. The selection of the right type of platform is done together with the customer based on the specifications of the booth and object to be treated.

HX3 is a 3D fully pneumatic platform. Pneumatic

cylinders and chains make the vertical and horizontal movements possible and a pneumatic motor navigates the platform for all lateral movements. The platform can carry one person and his equipment.

HX4 Alfalift is a 3D platform that is designed to carry

two persons and their equipment. It can be used in painting booths and

preparation booths. The platform is made with two doors on both sides that close automatically with the help of spring hinges. The HX4 can be custom-made depending on the customers’ wishes.

HX5 is a pneumatic platform that is similar to the HX3.

This platform is specially built for paint booth structures who aren’t strong enough to hold platforms. The HX5 drives fully on the ground and doesn’t come in contact with the wall. The new HX6 has the same characteristics as the HX5 but can hold two persons and their equipment.

Pneumatic platforms

Several types of pneumatic platforms, each with their own advantages.

HX3 HX4 HX5 HX6

Alfadis Platforms8

Functionalities

Main advantages:

• Entirely pneumatically operated.

• Cost effective solution with an improved quality.

• Can be mounted on the wall for 3D movement and no-floor-contact operation.

• Payload of 150kg (1 person + 1 equipment) for HX3 & HX5 or 250kg (2 persons & equipment) for HX4 & HX6 model.

• Maximum working area of 5.2 m from floor, 2.8 m from wall.

Platforms give an optimal working position as it improves the finish quality and decreases worker fatigue or strain injuries. Transfer efficiency is increased and overspray in painting booths is reduced.

This product is suitable for a number of industries:

• Commercial vehicles, trucks, light rail manufacturing and body shops.

• Bus, transit authorities, coach and repair shops.

• Rail industry (including rail repairs).

• Earth-moving equipment.

• Agriculture equipment (paint shops).

• Aircraft, aerospace and defence industries (i.e., ground equipment and helicopters).

• Other options where safe working in height is essential.

OPTIMAL WORKING POSITION MAIN ADVANTAGES

Alfadis Platforms9

Technical features HX

Controls

The cage is equipped with 3 handles for simple use:

• Up and down.• Moving in and out.• Lateral movement left/right.

The handles return automatically in their neutral position. They are situated at the front of the platform.

Movements

Pneumatical cylinders make vertical and horizontal movements possible. A pneumatic motor navigates the platform for all lateral movements.

The mast

The mast of the Alfalift HX is made out of a rigid construction for the vertical guiding of the platform.

Power Supply

The platforms are totally pneumatic powered by using hose reels, cable chains or cable trolleys. The platform consumes not more than a standard paint gun.

Pressure 6-8 bar

Air consumption max. 500 l/min

‘AlfAlift HX plAtforms improve tHe sAfety And efficiency during mAny ApplicAtions wHere eAsy HeigHt Access is required.’

Alfadis Platforms10

“AlfAdis plAtforms is A leAder in tHe development of new tecHnologies witH yeArs of eXperience.”

The Alfalift HX is equiped with 4 safety devices:

• Against leaks and pinching of the hoses.

• Against excess charges.

• Against collisions and obstacles on the ground.

• Against unwanted openings of the access doors.

Service and maintenance

The Alfalift needs a minimum of service and maintenance. However due to some severe working environments, Alfadis Platforms can offer her maintenance services.

The platform is made of a mechanical welded construction. The floor is a non-skid plate and the platform is surrounded by railings of 1100 mm high and has a baseboard of 230 mm high that prevents objects from falling.

Noise level Max 85 dB

Speed (up & down) 6 m/min

Speed (left & right) 25 m/min

Speed (in & out) 6 m/min

The cage of the platform

• Designed to carry 1 person (HX3 & HX5) or 2 persons (HX4 & HX6) and equipment.

• Doors that only open to the inside and are autoclosing.

• Compressed air connection.

• Optional features can be added.

• Netto weight between 400 and 700 kg.

• Maximum load for HX3 & HX5 is 150 kg and for HX4 & HX6 250 kg.

THE PLATFORM SECURITIES

Alfadis Platforms11

DimensionsModel HX3 (stock model)

Reference Model 580 Model 730 Model 830 Model 830 MAX

A 920 mm 1070 mm 1170 mm 1270 mm

B 580 mm 730 mm 830 mm 830 mm

C max 4100 mm 4100 mm 4100 mm 4100 mm

D 1420 mm 1970 mm 2270 mm 2470 mm

Course 500 mm 900 mm 1100 mm 1200 mm

E height of mast = 4270 mm standard, but optionally up to 5070 mm

Model HX4

Reference

A Max 1450 mm

B Max 1000 mm

C Max 5200 mm

D* 2850 mm

Course Max 1400 mm

E Height of mast = max 6200 mm* to be checked, according to granted certificates

(HX3) (HX4)

Alfadis Platforms12

Dimensions

(HX5) (HX6)

Model HX5 Reference Model 580 Model 730 Model 830 Model 830 MAX

A 1095 mm 1245 mm 1345 mm 1445 mm

B 580 mm 730 mm 830 mm 830 mm

C max 4100 mm 4100 mm 4100 mm 4100 mm

D 1595 mm 2145 mm 2445 mm 2645 mm

Course 500 mm 900 mm 1100 mm 1200 mm

E height of mast = 4470 mm standard, but optionally up to 5270 mm

Model HX6

Reference

A Max 1625 mm

B Max 1000 mm

C Max 5200 mm

D* 3025 mm

Course Max 1400 mm

E Height of mast = max 6400 mm* to be checked, according to granted certificates

Alfadis Platforms13

Hydraulic & Electrical platforms

HD Alfalift Hydraulic and HE Electrical platforms provide a safe

and worry-free work environment where the operator is the primary concern. These elevating platforms are designed for use in painting booths, but can also be put in other hazardous areas. They reach much higher and further than the Alfalift HX and are deployable in industries where larger items have to be easily reached.

The cage has a door on both sides and, if required, equipped with a door in front to exit the cage at height.

HE

HDS & HES scissor lift is able

to carry up to two persons and their equipment. The platforms go higher while remaining stable compared to the Alfalift HX.

HDR & HER swiveling arm is a

mounted lifting platform that is moveable on rails and equipped with hydraulic or electrical traction. The swiveling arm can be operated manually or automatically.

The Alfalift HD and HE are able to reach much higher than the HX.

HD

Alfadis Platforms14

Technical features HD & HE

Controls

The controls are situated at the rear of the platform, on the side of the mast. The platform can be equipped with pedals to move vertically and horizontally.

The cage is equipped with buttons for simple use:

• Up and down.

• Moving in and out.

• Lateral movement left/right.

Movements

An electric motor makes lateral movement possible. This motor powers the drivewheel on floor height. If required the motor is ATEX executed.

The mast

The mast is made out of a rigid structure for the vertical guiding of the platform. An emergency button is installed on both sides of the mast.

Power Supply

The hydraulic & electrical unit is placed outside (not ATEX).

‘AlfAlift Hd & He plAtforms go HigHer And furtHer, wHile remAining stAble in eXpolosive AreAs.’

Alfadis Platforms15

“AlfAdis plAtforms Are ce-Approved And comply witH requirements for AteX zone 2 .”

The Alfalift HD & HE can be equipped with several safety devices:

• Against leaks and pinching of the hoses.

• Against excess charges.

• Against collisions and obstacles on the ground.

• Against the failing of the chain.

• Against a power supply breakdown.

• Against leaks in the hydraulic circuit.

• A horn in the cage to alert the other personnel.

• Up to 2 anchoring points.

• Against unwanted openings of the access doors.

On demand

On demand, it is possible to request other dimensions.

The platform is made of a mechanically welded construction. The floor is a gridfloor that allows the ventilation of the booth to pass through. The platform is equipped with railings, including a baseboard. The maximum dimensions of the cage are 1100 x 2000 mm.

Noise level Max 85 dB

Speed (up & down) 6 m/min

Speed (left & right) 10 - 25 m/min

Speed (in & out) 6 m/min

The cage of the platform

• Designed to carry up to 2 persons and their equipment.

• Doors that open to the inside and are autoclosing.

• Compressed air connection.

• Optional features can be added.

• Netto weight between 1500 and 1800 kg.

• Maximum load is 300 kg.

THE PLATFORM SECURITIES

Alfadis Platforms16

Technical specifications LHE

Model LHE

Reference

A Max 1525 mm

B Max 830 mm

C Max 6400 mm

D* 4325 mm

Course Max 2800 mm

E Height of mast = max 8450 mm

F 2300 mm

G 1070 mm* to be checked, according to granted certificates

Alfadis Platforms17

Technical specifications HD(hydraulic scissor)

Dimension Description Formula

A Innerwidth cage Max 1100 mm

B Horizontal stroke Max 2800 mm

C min Total width retracted Max 4100 mm

C max Total width retracted Max 1300 - 1800 mm

D Vertical stroke Max 7000 mm

E Innerlength cage Max 2000 mm

Alfadis Platforms18

Technical specifications HS

Type* HS

Charge 300 kg

Lenght 4000 mm

With 800 mm

Course 2000 mm

Height 2800 mm

* Example on site. Dimensions on demand

Alfadis Platforms19

Platforms on demand

E very customer and booth is different. Alfadis Platforms listens to the wishes of the customer

and designs a platform that answers to the challenges. Together with our engineering office, we make use of the latest technologies to meet the standards of the customer, quality and safety legislation.

Flexibility is key.

We design our platforms to the wishes of our customers!

Alfadis Platforms20

When an image says more than words...

Alfadis Platforms21

O ur responsibility does not end upon the completion of your project. We also have a highly skilled team of

service and maintenance engineers, who ensure the continuous operation of your installation with minimal downtime.

O ur aftersales commitment not only covers maintenance and repair work, but also the required spare parts, most of

them manufacturerd in-house.

O ur Aftersales Department is at your service to study and discuss all kinds of extensions and additions to your actual

installation.

Our website gives the possibility to order spare parts for your pneumatic, hydraulic or electrical platform. The “webshop”

enables you to choose from a range of parts that are displayed with pictures. Every customer can fill in a price request that will be sent by our sales responsables.

Aftersales

What can we do for you?

Alfadis Platforms22

www.alfadisplatforms.com

info@alfadisplatforms.com

Alfadis Platforms

Boulevard Industriel 99B-7700 Mouscron

+32 56 85 62 09

Alfadis Platforms is part of

Contact us