We Design Innovative Bus Interiors LED Retrofit Systems Designed ForPretoria Hadley/Transmatic L-20...
-
Upload
clinton-arnold -
Category
Documents
-
view
215 -
download
0
Transcript of We Design Innovative Bus Interiors LED Retrofit Systems Designed ForPretoria Hadley/Transmatic L-20...
We Design Innovative Bus Interiors
LED Retrofit SystemsDesigned For
PretoriaPretoriaand
Hadley/Transmatic L-20Hadley/Transmatic L-20
Fluorescent
Aisle Lighting / Ducting Systems
Advantages of Pretoria LED Retrofit Kits
• Systems Designed for the L-20 Fiberglass and Pretoria Lamp
Fixtures
• Simple, Quick and Solid Installation – (40’ Bus Typically < 90
Minutes)
• Two LED Color Hue Options – Pretoria LED’s Provide Consistent
Color
• 6500K (Cool White)
• 4500K (Warm White)
• New Pretoria and L-20 Lens Profiles are Available in White and
Blue/White
• Elimination of High Voltage Ballast
• Elimination of Fluorescent Lamp Tubes
• Decreased Power Consumption
• Each Fixture Retains Ability to Fully Extinguish or Dim at Five
Different
Light Output Levels (10%, 20%, 40%, 60% or 80%)
LED Array ExtrusionDouble Row of LED’s
Existing FluorescentLight Housing
LED Array Support
Cross Section of a Typical Fluorescent Light Housing
Showing LED Array and Mid Point LED Array Support
Drill ¼” Hole in Bottom of Fixture with the
Provided Drill Guide to Accept the LED Array Support
LED Array Support is pre-installed onto the supplied LED Driver mount bracket
No need to drill holes for the L-20
- Pretoria Fluorescent - - L-20 Fluorescent -
-Pretoria -
New Mounting Plate with LED Driver Attached
is Supplied for each Fixture
- L-20 -
New Mounting Plate with LED Driver attached
is Supplied for each Fixture
Ensure that the Positive and Negative Connections from the LED Driver to the LED Array is completed before Installation of the
LED Array into the Fixture.
The Barrel Connectors can be inserted into the Side of the LED Array Extrusion as Shown.
Keep and Re-Use the Ballast/Driver Mounting Screws
LED Array Support End Caps
Insert one End of the LED Array around the Spring Sided Socket and Push Until the Spring
Bottoms Out
Insert the Opposite End of the LED Array
Around the Fixed Socket AndPush the LED Array Straight Down to
Engage the LED Array into the LED Array Center Supports
Spring Sided SocketFixed Socket
L-20 Fluorescent L-20 Fluorescent /LED Retrofit 40’ LF New Flyer
Pretoria Fluorescent Pretoria Fluorescent /LED Retrofit 40’ LF Orion
www.pretoriausa.com