WE ARE AVAILABLE 24/7 - processsupply.com · Bonney Forge to develop products at the highest...
Transcript of WE ARE AVAILABLE 24/7 - processsupply.com · Bonney Forge to develop products at the highest...
Physical Address 1509 Riverport RoadKingsport, TN 37660
Physical Address 400 Natalie Boulevard
Loudon, TN 37774
Kingsport TN: 423-765-9991 | Loudon TN: 865-458-2333
FOR QUESTIONS OR TO REQUEST A QUOTE, VISIT WWW.PROCESSSUPPLY.COM OR CALL
W E A R E A V A I L A B L E 2 4 / 7
Forged Steel FittingS & UnionS
SaleS Center/WarehouSe 14496 Croghan Pike
P.o. Box 330 Mt. union, Pa 17066
(814) 542-2545 • (800) 231-0655 (800) 345-7546 • Fax (814) 542-9977
www.bonneyforge.come-mail: [email protected]
Table Of COnTenTs
Corporate overview ................................................................................. 2, 3
Condensed Description ........................................................................... 4, 5
90° elbow – Class 2000, 3000, 6000 & 9000 ............................................. 6
45° elbow – Class 2000, 3000, 6000 & 9000 ............................................. 7
tee – Class 2000, 3000, 6000 & 9000 ....................................................... 8
Cross – Class 2000, 3000, 6000 & 9000 .................................................... 9
lateral – Class 3000, 6000 & 9000 ........................................................... 10
Street elbow – Class 3000 & 6000 ............................................................ 11
Quikleg 90® – Class 3000 & 6000 ............................................................ 12
Boss With lip – Class 3000 & 6000 .......................................................... 13
Socket Weld Couplings, reducers and Caps – Class 3000, 6000 & 9000 .. 14
threaded Couplings, reducers and Caps – Class 3000 & 6000 ................. 15
Plugs & Bushings – Class 3000/6000 ....................................................... 16
Socket Weld reducer inserts (MSS-SP-79) – Class 3000, 6000 & 9000 .. 17
SP-83 union – Class 3000 & 6000 ............................................................ 18
rockwood unions ..................................................................................... 19
lug nut unions ......................................................................................... 20
technical Data........................................................................................... 21
2
Bonney Forge - The Company You Rely on For Forged Steel Fittings and Unions
Since 1967, one name has been syn-onymous with premier Forged Steel Fittings and Unions – Bonney Forge.
Our continued investment in new technology helps maintain a constant level of superior quality in our prod-ucts, which is unparalleled in the industry. Some of this new technology includes, state-of-the-art machin-ing centers, which reduce product variability while increasing product serviceability and laser marking ma-chines, which increases our capability to provide part information even on the smallest of components.
Backing by the most comprehensive product line in the industry and an extensive inventory that makes all our products readily available, Bonney Forge is the number one resource for the power, oil, chemical, marine, and construction industries through-out the world.
Dependable, Durable, Uniform and Precise
Our unparalleled, integrated, state of the art manufacturing facility allows Bonney Forge to develop products at the highest volume, all of which define the Bonney Forge mission – consistent unyielding quality. The tight control we maintain over our manu-facturing process has earned Bonney Forge ISO-9001 recognition. Addition-ally, products are inspected to the
strict requirements of ASME B16.11, MSS SP-79, and MSS SP-83.
Superior Corrosion Resistance
All carbon and low alloy steel fittings are zinc-phosphate coated for superior corrosion resistance. Stainless steel fittings are electropolished to remove free iron and to provide a high-quality finish. All of this is done to ensure our products have the highest degree of corrosion resistance.
All The Fittings You Need
Our fittings come in a variety of classes and material grades for any application. Socket Weld fittings are available in class 3000, 6000 and 9000. Threaded fittings are available in class 2000, 3000, and 6000.
Threaded couplings, reducers, unions, half couplings and caps are available in class 3000 and 6000. Socket Weld couplings, reducers, half couplings and reducer inserts are available in class 3000, 6000 and 9000.
3
Other specialty designed products are available upon request including the following:
• ReducingTees • Multipleendconfigurations • Speciallengthcouplings • Wealsoconsidercustomer specific drawings
5
COndensed desCripTiOn
COuplings, reduCers & Caps
reduCer inserTs
uniOns
Type 1nominal pipe sizes from 1/4" x 1/8" to 2" x 1 1/2"
Type 2nominal pipe sizes from 1/2" x 1/4" to 2" x 1 1/4"
MSS-SP-83accommodates 1/8" to 3" pipe class 3000 and 1/4" to 2" pipe class 6000.
RockwoodFor use with 1/8" to 2" pipe. 1/8" to 2" threaded connection. 1/4" to 2" socket weld-stainless steel only.
available in class 3000 and 6000.
Socket weld reducer inserts available in class 3000, 6000 and 9000. inserts stocked in various materials. Consult factory for special applications.
Bonney Forge MSS-SP-83 threaded and socket weld unions in class 3000 and 6000. Use Bonney Forge Rockwood Unions for the ultimate in operation and durability.
Lug Nut3/8" to 4" class 3000 and 1/2" to 2" class 6000 threaded & socket weld.
4
sOCkeT Weld/Threaded fiTTings
plugs & bushings
COndensed desCripTiOn
90° Elbowthreaded Class 2000 - 1/4" to 4" Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Socket Weld Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Class 9000 - 1/2" to 2"
Teethreaded Class 2000 - 1/4" to 4" Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Socket Weld Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Class 9000 - 1/2" to 2"
45° Elbowthreaded Class 2000 - 1/4" to 4" Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Socket Weld Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Class 9000 - 1/2" to 2"
Lateralthreaded Class 3000 - 1/4" to 2" Class 6000 - 1/2" to 1 1/2" Socket Weld Class 3000 - 3/8" to 2" Class 6000 - 1/2" to 2" Class 9000 - 1/2" to 1 1/2"
Pipe Capthreaded Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Socket Weld Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4"
Half Couplingthreaded Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Socket Weld Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Class 9000 - 1/2" to 2"
Couplingthreaded Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Socket Weld Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Class 9000 - 1/2" to 2"
Reducerthreaded Class 3000 - 1/4" to 4" Class 6000 - 1/4" to 4" Socket Weld Class 3000 - 1/4" to 4" Class 6000 - 1/4" to 4" Class 9000 - 1/2" to 2"
Boss w/Lipthreaded Class 3000 - 1/4" to 3" Class 6000 - 1/8" to 3" Socket Weld Class 3000 - 1/4" to 3" Class 6000 - 1/8" to 3"
Street Elbowthreaded Class 3000 - 1/8" to 2" Class 6000 - 1/8" to 1 1/2"
Crossthreaded Class 2000 - 1/4" to 4" Class 3000 - 1/8" to 4" Class 6000 - 1/8" to 4" Socket Weld Class 3000 - 1/8" to 4" Class 6000 - 1/2" to 3" Class 9000 - 1/2" to 2"
Round Plug1/8" to 4"
Hexagon Plug1/8" to 4"
Square Plug1/8" to 4"
Hexagon Bushing1/4" to 4"
Flush Bushing1/4" to 4"
• Threaded - available in Class 2000, 3000, & 6000 • Socket Weld - available in Class 3000, 6000 & 9000
QuikLeg 90®
threaded Class 3000 - 1/2" to 2" Class 6000 - 1/2" to1 1/2" Socket Weld Class 3000 - 1/2" to 2" Class 6000 - 3/4" to 2"
Additional sizes available on request Additional sizes available on request
6
90° elbOW
Class 2000 Class 2000Class 3000 Class 3000Class 6000 Class 6000Class 9000 Class 9000
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
2000a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 5/8 4 5/16 5 3/4
Weight 0.23 0.29 0.48 0.75 1.08 1.59 2.19 3.52 7.09 11.33 25.08
3000a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6
Weight 0.27 0.35 0.58 0.97 1.42 2.29 2.77 5.43 5.87 11.03 17.50 33.20
6000a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 3/16 4 1/2 B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4 6
Weight 0.37 0.65 1.05 1.64 2.69 3.62 6.13 7.84 14.40 22.95 37.12 33.42
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
3000
a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 3/8 5 3/4 C 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 e 7/16 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 5/8
Weight 0.25 0.21 0.26 0.45 0.75 1.05 1.52 2.08 3.37 6.67 11.08 22.59
6000
a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 C 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 e 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 1/2 2 3/4
Weight 0.26 0.59 0.97 1.42 2.33 2.96 5.71 6.42 12.16 18.69 34.15
9000
a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16C 0.855 1.065 1.330 1.675 1.915 2.406
D Min. 3/8 1/2 1/2 1/2 1/2 5/8 e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8
Weight 1.70 2.79 3.81 5.71 8.15 11.26
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
2000a 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 3/4 2 1/16 2 1/2 3 1/8B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/8 6
Weight 0.21 0.24 0.47 0.73 1.03 1.46 1.77 3.03 8.07 9.46 24.57
3000a 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 5/16 4 4 3/4 6
Weight 0.23 0.30 0.58 0.91 1.29 2.02 2.29 4.54 5.26 7.83 12.99 24.75
6000a 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 3 1/8B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 5/16 4 4 3/4 6 6
Weight 0.56 0.58 0.91 1.54 2.25 2.84 5.12 6.82 10.28 15.00 35.20 24.75
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
3000
a 3/4 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 3/4 2 1/16 2 1/2 3 1/8B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/8 6C 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 e 5/16 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 5/8
Weight 0.22 0.19 0.22 0.42 0.70 0.95 1.39 1.68 2.96 7.76 8.55 24.06
6000
a 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 3/4 1 27/32 2 1/16 2 1/2 3 1/8B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 3/8 4 4 3/4 6 C 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 e 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 3/8 1 5/8
Weight 0.22 0.48 0.89 1.26 2.00 2.29 4.49 5.57 8.69 14.20 24.06
9000
a 1 1/4 1 5/16 1 3/8 1 3/4 1 27/32 2 1/16B 1 27/32 2 7/32 2 1/2 3 1/32 3 3/8 4C 0.855 1.065 1.330 1.675 1.915 2.406
D Min. 3/8 1/2 1/2 1/2 1/2 5/8 e 5/8 3/4 13/16 7/8 1 1 1/8
Weight 1.31 2.37 2.91 4.31 6.89 10.84
Note: 1. All Dimensions are in inches 2. Weights based on carbon steel (A105)
Note: 1. All Dimensions are in inches 2. Weights based on carbon steel (A105)
SPeCiFiCATioNS:ASme B16.11 ASme B1.20.1 - (NPT)
SPeCiFiCATioNS:ASme B16.11 ASme B1.20.1 - (NPT)
B
A
B BC
A A
E
D
B
A
D E
C
Threaded Threaded
Socket Weld Socket Weld
7
45° elbOW
Class 2000Class 3000Class 6000Class 9000
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
2000a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4
Weight 0.29 0.38 0.63 0.95 1.41 2.13 2.91 4.41 9.89 14.17 29.70
3000a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 1 11/32 4 4 3/4 6
Weight 0.36 0.47 0.77 1.29 1.89 3.08 3.73 7.00 7.63 14.67 22.65 40.08
6000a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 3/16 4 1/2B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4 6
Weight 0.47 0.87 1.45 2.24 3.71 4.92 8.13 10.11 19.16 30.43 47.55 47.77
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
3000
a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 3/8 5 3/4C 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 e 7/16 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 5/8
Weight 0.33 0.27 0.34 0.59 0.94 1.29 2.04 2.77 4.11 8.68 13.79 28.60
6000
a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6C 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 e 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 1/2 2 3/4
Weight 0.34 0.80 1.27 1.91 3.17 4.04 7.55 8.19 16.15 24.43 42.79
9000
a 1 1/2 1 3/4 2 2 3/8 2 1/2 3B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16C 0.855 1.065 1.330 1.675 1.915 2.406
D Min. 3/8 1/2 1/2 1/2 1/2 5/8 e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8
Weight 2.31 3.62 5.20 7.55 10.78 15.79
Note: 1. All Dimensions are in inches 2. Weights based on carbon steel (A105)
SPeCiFiCATioNS:ASme B16.11 ASme B1.20.1 - (NPT) Threaded
Socket Weld
8
Tee
A A
B B C
A AED
9
CrOss
Class 2000Class 3000Class 6000Class 9000
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
2000a 31/32 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2B 1 1/16 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6
Weight 0.56 0.47 0.83 1.19 1.64 2.46 3.51 5.50 18.32 26.41 45.76
3000a 31/32 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 B 1 1/16 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6
Weight 0.65 0.58 0.97 1.60 2.28 3.65 4.54 8.47 9.10 17.69 26.13 47.37
6000a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 4 1/2 B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 6
Weight 0.65 1.19 1.60 2.65 4.34 5.92 10.50 12.12 23.15 28.13 54.00 43.50
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
3000
a 15/16 15/16 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2B 1 1/16 1 1/16 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6C 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 e 7/16 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 5/8
Weight 0.25 0.25 0.42 0.72 1.17 1.49 2.38 3.25 5.08 15.78 24.73 40.00
6000
a 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 B 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 C 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535
D Min. 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 e 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 1/2
Weight 1.55 2.31 3.74 5.25 8.80 9.66 16.75 23.00
9000
a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4C 0.855 1.065 1.330 1.675 1.915 2.406
D Min. 3/8 1/2 1/2 1/2 1/2 5/8 e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8
Weight 1.75 4.12 5.25 5.12 8.75 22.19
Note: 1. All Dimensions are in inches 2. Weights based on carbon steel (A105)
SPeCiFiCATioNS:ASme B16.11 ASme B1.20.1 - (NPT)
B C
AED
Threaded
Socket Weld
B
A
Class 3000Class 6000Class 9000
ClASS DimeNSioNS1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
3000
a 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 5B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32e 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8
Weight 1.00 1.99 2.73 4.43 5.45 11.10 11.70
6000
a 3 3 1/2 3 15/16 4 3/4 5 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 e 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8
Weight 2.38 3.25 5.44 7.19 12.31
ClASS DimeNSioNS1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
3000
a 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32C 0.690 0.855 1.065 1.330 1.675 1.915 2.406
D Min. 3/8 3/8 1/2 1/2 1/2 1/2 5/8 e 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16
Weight 1.00 0.88 1.56 2.08 3.08 4.22 6.89
6000
a 2 9/16 3 3 1/2 3 15/16 4 3/4 5B 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32C 0.855 1.065 1.330 1.675 1.915 2.406
D Min. 3/8 1/2 1/2 1/2 1/2 5/8 e 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8
Weight 2.00 3.07 4.85 6.25 11.94 12.50
9000
a 3 3 1/2 3 15/16 4 3/4 5 B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 C 0.855 1.065 1.330 1.675 1.915
D Min. 9/16 5/8 11/16 7/8 1/2 e 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8
Weight 1.75 2.38 3.75 6.88 6.88 Note: 1. All Dimensions are in inches
2. Weights based on carbon steel (A105)
SPeCiFiCATioNS:ASme B16.11 - (SoCkeT eNDS oNlY)ASme B1.20.1 - (NPT) Threaded
Socket Weld
10
laTeral
A A
DB BC
E E
11
sTreeT elbOW
Class 3000Class 6000
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
3000
a 7/8 7/8 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2 B 1 1/16 1 1/16 1 5/16 1 1/2 1 13/16 2 3/16 2 7/16 3 1/32 3 5/16C 1 1/4 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16
Weight 0.27 0.25 0.41 0.61 1.02 1.73 2.42 4.05 5.25
6000
a 7/8 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2 B 1 1/16 1 5/16 1 1/2 1 13/16 2 3/16 2 7/16 3 1/32 3 5/16 C 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16
Weight 0.42 0.44 0.69 1.18 2.09 3.12 4.87 7.04
Note: 1. All Dimensions are in inches 2. Weights based on carbon steel (A105)
SPeCiFiCATioNS:ASme B16.11 ASme B1.20.1 - (NPT)
Threaded
B
C
A
Class 3000Class 6000
ClASS DimeNSioNS1/2 3/4 1 1 1/4 1 1/2 2
3000
a 1 1/2 1 1/2 2 2 2 3/8 2 1/2B 1 7/8 1 7/8 2 1/2 2 1/2 3 3 1/8F 1 7/8 1 7/8 2 1/2 2 1/2 3 3 1/4g 0.855 1.065 1.330 1.675 1.915 2.406h 1/2 9/16 3/4 3/4 3/4 7/8
Weight 2.63 2.19 6.02 5.10 10.31
6000
a 1 1/2 2 2 2 3/8 2 1/2B 1 7/8 2 1/2 2 1/2 3 3 1/8 F 1 7/8 2 1/2 2 1/2 3 3 1/8g 0.855 1.065 1.330 1.675 1.915h 9/16 9/16 3/4 3/4 7/8
Weight 6.53 10.31
ClASS DimeNSioNS1/2 3/4 1 1 1/4 1 1/2 2
3000
a 1 1/2 1 1/2 1 1/2 2 2 2 3/8B 1 7/8 1 7/8 1 7/8 2 1/2 2 1/2 3C 0.855 1.065 1.330 1.675 1.915 2.406
D Min. 3/8 1/2 1/2 1/2 1/2 5/8 e 5/8 3/4 7/8 1 1/4 1 1/4 1 1/2F 1 7/8 1 7/8 1 7/8 2 1/2 2 1/2 3g 0.855 1.065 1.330 1.675 1.915 2.406h 9/16 9/16 9/16 3/4 3/4 3/4
Weight 2.03 2.63 3.89 6.33
6000
a 1 1/2 2 2 3/8 2 3/8 2 1/2B 1 7/8 2 1/2 3 3 3 3/8C 1.065 1.330 1.675 1.915 2.406
D Min. 1/2 1/2 1/2 1/2 5/8 e 7/8 1 1/16 1 1/4 1 1/2 1 5/8F 1 7/8 2 1/2 3 3 3 1/8g 1.065 1.330 1.675 1.915 2.406h 9/16 3/4 9/16 9/16 11/16
Weight 2.19 6.02 4.75 10.98
Note: 1. All Dimensions are in inches 2. Weights based on carbon steel (A105)
SPeCiFiCATioNS:ASme B16.11 - (SoCkeT DimeNSioNS oNlY)ASme B1.20.1 - (NPT) Threaded
Socket Weld
12
Quikleg 90
B BCG G
A A
E D
A A
H H
13
bOss WiTh lip
Class 3000Class 6000
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3
3000
a 1 3/16 1 3/16 1 5/16 1 3/8 1 11/16 1 7/8 2 2 1/4 2 1/2 2 3/4B 11/16 13/16 15/16 1 1/16 1 5/16 1 11/16 1 15/16 2 7/16 2 7/8 3 1/2e 1 1 1/16 1 3/8 1 1/2 1 13/16 2 1/4 2 1/2 3 1/8 3 5/8 4 3/8
Weight 0.13 0.21 0.29 0.29 0.51 0.84 1.18 2.04 2.93 4.11
6000
a 1 3/16 1 3/16 1 3/16 1 5/16 1 3/8 1 11/16 1 7/8 2 2 1/4 2 1/2 2 3/4B 9/16 11/16 13/16 15/16 1 1/16 1 5/16 1 11/16 1 15/16 2 7/16 2 7/8 3 1/2e 7/8 1 1 1/4 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5
Weight 0.12 0.15 0.20 0.33 0.43 0.93 1.15 1.86 3.02 4.40 6.40
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3
3000
a 1 3/16 1 3/16 1 5/16 1 3/8 1 11/16 1 7/8 2 2 1/4 2 1/2 2 3/4B 11/16 13/16 15/16 1 1/16 1 5/16 1 11/16 1 15/16 2 7/16 2 7/8 3 1/2
D Min. 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8e 15/16 1 1/16 1 5/16 1 1/2 1 13/16 2 1/4 2 1/2 3 1/8 3 5/8 4 3/8F 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535
Weight 0.13 0.21 0.29 0.29 0.51 0.84 1.18 2.04 2.93 4.11
6000
a 1 3/16 1 3/16 1 3/16 1 5/16 1 3/8 1 11/16 1 7/8 2 2 1/4 2 1/2 2 3/4B 9/16 11/16 13/16 15/16 1 1/16 1 5/16 1 11/16 1 15/16 2 7/16 2 7/8 3 1/2
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8e 7/8 1 1 1/4 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5F 0.420 0.555 0.690 0.855 1.065 1.340 1.675 1.915 2.406 2.906 3.535
Weight 0.18 0.16 0.22 0.33 0.43 0.93 1.24 1.91 3.07 4.83 6.83
Note: 1. All Dimensions are in inches 2. Weights based on carbon steel (A105)
SPeCiFiCATioNS:ASme B16.11 - (SoCkeT DimeNSioNS oNlY) ASme B1.20.1 - (NPT)
Threaded
Socket Weld
E E
45° 45°
B B
A A
D
.380 .380
14
sOCkeT Weld COuplings, reduCers and Caps
Class 3000Class 6000Class 9000
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
3000
a 1 1/16 1 1/16 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 9/16 2 3/4 3aa 1 1/32 1 1/32 1 1/32 1 3/16 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64B 3/4 7/8 1 1/16 1 1/4 1 1/2 1 13/16 2 1/4 2 1/2 3 3 5/8 4 5/16 5 1/2C 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4e 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4F 11/16 3/4 3/4 7/8 1 1 1/16 1 3/16 1 1/4 1 1/2 1 9/16 1 13/16 2 1/16
CoUPliNg Weight 0.09 0.12 0.16 0.24 0.39 0.57 0.90 1.04 1.79 2.42 4.06 5.73HAlF CoUPliNg Weight 0.10 0.13 0.18 0.32 0.46 0.75 1.24 1.33 2.38 3.55 6.24 8.30ReDUCeR Weight 0.12 0.16 0.24 0.39 0.57 0.90 1.04 1.79 2.42 4.06 5.73CAP Weight 0.07 0.10 0.14 0.22 0.36 0.55 1.01 1.27 1.99 3.38 6.30 12.08
6000
a 1 1/16 1 1/16 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 9/16 2 3/4 3aa 1 1/16 1 1/8 1 1/8 1 5/32 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64B 7/8 1 1/16 1 5/16 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4C 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
D Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4e 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4F 15/16 15/16 1 1 1/16 1 1/4 1 5/16 1 3/8 1 5/8 1 11/16 1 15/16 2 5/16
CoUPliNg Weight 0.23 0.33 0.45 0.67 1.27 1.37 2.09 3.85 4.93 6.69 8.00HAlF CoUPliNg Weight 0.56 0.80 1.58 1.72 2.99 4.99 5.44 9.50 12.64ReDUCeR Weight 0.23 0.33 0.45 0.67 1.27 1.37 2.09 3.85 4.93 6.69 8.00CAP Weight 0.20 0.27 0.42 0.58 1.18 1.41 2.19 3.65 5.63 8.78 14.25
9000
a 1 3/8 1 1/2 1 3/4 1 51/64 2 2 1/2 aa 1 3/8 1 1/2 1 3/4 1 51/64 2 2 1/2B 1 13/16 2 2 3/8 2 3/4 3 1/16 3 5/8C 0.855 1.065 1.330 1.675 1.915 2.406
D Min. 3/8 1/2 1/2 1/2 1/2 5/8 e 3/8 3/8 1/2 1/2 1/2 3/4
CoUPliNg Weight 0.62 1.04 1.71 1.69 2.93 4.61 HAlF CoUPliNg Weight 0.88 0.80 1.74 2.22 2.93 4.99 ReDUCeR Weight 0.62 1.04 1.71 1.69 2.93 4.61
Socket WeldCap Coupling Half
CouplingReducing Coupling
F
D D DDDE E
AA A AA
B B B BC C C C
15
Threaded COuplings, reduCers and Caps
Class 3000Class 6000
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
3000
a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4B 3/4 3/4 7/8 1 1/8 1 3/8 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 1/2C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8D 15/16 1 1 1 1/4 1 7/16 1 5/8 1 3/4 1 3/4 1 7/8 2 3/8 2 9/16 2 11/16
CoUPliNg Weight 0.13 0.11 0.13 0.29 0.42 0.85 1.60 2.26 2.95 4.61 6.89 12.48HAlF CoUPliNg Weight 0.06 0.05 0.06 0.13 0.21 0.42 0.79 1.12 1.53 2.34 3.26 6.48ReDUCeR Weight 0.11 0.13 0.29 0.42 0.85 1.60 2.26 2.95 4.61 6.89 12.48CAP Weight 0.10 0.09 0.10 0.24 0.37 0.74 1.35 1.64 2.40 4.45 7.14 12.42
6000
a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4B 7/8 1 1 1/4 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8D 1 1 1/16 1 1/16 1 5/16 1 1/2 1 11/16 1 13/16 1 7/8 2 2 1/2 2 11/16 2 15/16
CoUPliNg Weight 0.18 0.28 0.39 0.70 0.95 1.93 2.28 4.20 6.00 8.65 13.41 21.86HAlF CoUPliNg Weight 0.10 0.12 0.19 0.35 0.49 0.97 1.15 2.08 3.05 4.35 6.83 7.05ReDUCeR Weight 0.28 0.39 0.70 0.95 1.93 2.28 4.20 6.00 8.65 13.41 21.86CAP Weight 0.16 0.23 0.31 0.55 0.78 1.55 1.90 2.79 4.35 8.10 10.73 15.58
Note: 1. All dimensions are in inches. 2. Weights based on carbon steel (A105) 3.Reducerweightsshownarebasedonfullcouplingsizes.
4.Reducerssmallerthan1/4"arenotoffered.
Note: 1. All dimensions are in inches. 2. Weights based on carbon steel (A105) 3.Reducerweightsshownarebasedonfullcouplingsizes. 4.Reducerssmallerthan1/4"arenotoffered.
Threaded
Cap Coupling Half Coupling
Reducing Coupling
D CA A
B B B B
SPeCiFiCATioNS:ASme B16.11
SPeCiFiCATioNS:ASme B16.11 ASme B1.20.1 - (NPT)
sOCkeT Weld reduCer inserTs (Mss sp-79)
Class 3000Class 6000Class 9000
3000 6000 9000 WeigHT
SiZe C D Fig. Type A (min.) B e Fig.
Type A (min.) B e Fig. Type A (min.) B e 3000 6000 9000
3/8 x 1/4 0.685 0.555 1 3/8 3/4 15/16 1 3/8 27/32 1 0.12 0.201/2 x 3/8 0.850 0.690 1 3/8 13/16 1 1/16 1 3/8 29/32 1 3/16 0.16 0.191/2 x 1/4 0.850 0.555 1 3/8 13/16 15/16 1 3/8 13/16 1 0.17 0.193/4 x 1/2 1.060 0.855 1 3/8 7/8 1 5/16 1 3/8 1 1 3/8 1 3/8 1 3/16 1 3/4 0.26 0.36 0.623/4 x 3/8 1.060 0.690 2 3/8 5/8 1 3/8 7/8 1 3/16 0.19 0.253/4 x 1/4 1.060 0.555 2 3/8 11/16 2 3/8 7/8 0.23 0.271 x 3/4 1.325 1.065 1 1/2 15/16 1 17/32 1 1/2 1 1/8 1 11/16 1 1/2 1 1/4 2 0.38 0.60 1.101 x 1/2 1.325 0.855 2 3/8 5/8 1 3/8 1 1/8 1 3/8 1 3/8 1 1/8 1 3/4 0.32 0.49 0.741 x 3/8 1.325 0.690 2 3/8 11/16 2 3/8 7/8 0.37 0.411 x 1/4 1.325 0.555 2 3/8 3/4 2 3/8 15/16 0.41 0.50
1 1/4 x 1 1.670 1.330 1 1/2 1 1 7/8 1 1/2 1 3/16 2 1 1/2 1 3/8 2 3/8 0.62 0.89 1.441 1/4 x 3/4 1.670 1.065 2 1/2 11/16 2 1/2 13/16 1 1/2 1 3/16 2 0.54 1.04 1.811 1/4 x 1/2 1.670 0.855 2 3/8 3/4 2 3/8 7/8 2 3/8 7/8 0.65 0.95 1.141 1/4 x 3/8 1.670 0.690 2 3/8 13/16 2 3/8 15/16 0.70 1.041 1/4 x 1/4 1.670 0.555 2 3/8 7/8 2 3/8 1 0.75 1.141 1/2 x 1 1/4 1.910 1.675 1 1/2 1 1/8 2 1/4 1 1/2 1 3/8 2 3/8 1 1/2 1 5/8 2 3/4 0.80 1.23 1.901 1/2 x 1 1.910 1.330 2 1/2 11/16 1 1/2 1 5/32 2 1/16 1 1/2 1 3/8 2 3/8 0.68 1.13 1.13
1 1/2 x 3/4 1.910 1.065 2 1/2 3/4 2 1/2 1 2 1/2 1 0.84 1.04 1.231 1/2 x 1/2 1.910 0.855 2 3/8 13/16 2 3/8 1 1/16 2 3/8 1 0.97 1.15 1.331 1/2 x 3/8 1.910 0.690 2 3/8 7/8 2 3/8 1 1/8 1.00 1.252 x 1 1/2 2.385 1.915 1 1/2 1 1/4 2 1/2 1 1/2 1 17/32 2 11/16 1 1/2 2 1/16 3 1.24 1.93 2.432 x 1 1/4 2.385 1.675 2 1/2 13/16 2 1/2 15/16 1 1/2 2 2 3/4 1.16 1.36 1.96
2 x 1 2.385 1.330 2 1/2 7/8 2 1/2 1 2 1/2 1 1.50 1.86 1.542 x 3/4 2.385 1.065 2 1/2 15/16 2 1/2 1 1/16 2 1/2 1 1/16 1.69 1.82 1.822 x 1/2 2.385 0.855 2 3/8 1 2 3/8 1 1/8 2 3/8 1 1/8 1.81 1.92 1.92
Note: 1. All dimensions are in inches. 2. Weights based on carbon steel (A105) 3. Larger sizes are available upon request, and are supplied in accordance to MSS SP-79.
SPeCiFiCATioNS:mSS SP-79 ASme B16.11 - (SoCkeT DimeNSioNS oNlY)
Type 1 Type 2
E CD DC
17
A AB B
Class 3000Class 6000
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
3000/6000
a 1 3/8 1 5/8 1 5/8 1 3/4 1 3/4 2 2 2 2 1/2 2 3/4 2 3/4 3B 13/32 9/16 11/16 13/16 1 1/16 1 5/16 1 11/16 1 29/32 2 3/8 2 7/8 3 1/2 4 1/2C 7/16 5/8 11/16 7/8 1 1/16 1 3/8 1 3/4 2 2 1/2 3 3 3/4 4 7/8
D Min. 1/4 1/4 5/16 5/16 3/8 3/8 9/16 5/8 11/16 3/4 13/16 1e 7/16 1/2 9/16 11/16 3/4 27/32 7/8 15/16 1 1 1/4 1 11/16 1 25/32F 9/32 3/8 7/16 9/16 5/8 13/16 15/16 1 1/8 1 5/16 1 1/2 1 11/16 2 1/2g 1/4 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 1 1/4h 3/8 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 1/4
J Min. 3/16 3/16 3/16 1/4 1/4 3/8 3/8 3/8 1/2 7/16 1RoUND PlUg Weight 0.05 0.11 0.18 0.25 0.41 0.73 1.20 1.57 3.10 5.01 7.40 13.25
HexAgoN PlUg Weight 0.03 0.06 0.09 0.16 0.27 0.48 0.93 1.35 2.26 3.84 7.08 12.07
SqUARe PlUg Weight 0.02 0.04 0.06 0.12 0.19 0.35 0.61 0.83 1.41 2.33 3.57 6.28
Hex BUSHiNg Weight 0.03 0.04 0.06 0.12 0.21 0.38 0.37 0.77 1.31 3.78 7.31
FlUSH BUSHiNg Weight 0.05 0.07 0.03 0.06 0.09 0.17 0.19 0.39 0.62 1.00 1.88
Note: 1. All Dimensions are in inches 2. Weights based on carbon steel (A105)
SPeCiFiCATioNS:ASme B16.11 ASme B1.20.1 - (NPT)
16
plugs & bushings
Flush Bushing Hex Bushing Hex Plug Round Plug Square Plug
E
CC
B F
E E
A
H
GD
J
18
sp-83 uniOn
Class 3000Class 6000
ClASS DimeNSioNS SiZeS (iNCHeS)1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3
3000
a 1 45/64 1 23/32 1 7/8 2 2 9/32 2 1/2 2 7/8 3 1/32 3 1/2 4 3/64 4 19/64B 1 3/8 1 3/8 1 9/16 1 13/16 2 11/64 2 9/16 3 1/8 3 1/2 4 1/4 4 7/8 5 3/4C 7/8 7/8 1 1/32 1 15/64 1 31/64 1 13/16 2 15/64 2 31/64 3 1/32 3 21/32 4 13/32D 61/64 31/32 1 1/8 1 1/4 1 9/32 1 1/2 1 7/8 2 1/32 2 1/4 2 51/64 3 3/64
e Min. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8F 0.420 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535
Weight 0.41 0.38 0.54 0.79 1.25 1.80 2.88 3.64 5.81 8.77 12.98
6000
a 1 7/8 1 63/64 2 19/64 2 1/2 2 7/8 3 1/64 3 17/32 4 17/64 B 1 37/64 1 13/16 2 13/64 2 37/64 3 7/64 3 27/64 4 3/32 4 7/8 C 1 1/32 1 15/64 1 15/32 1 51/64 2 11/64 2 15/32 3 1/32 3 21/32D 1 1/8 1 15/64 1 35/64 1 1/2 1 7/8 2 1/64 2 17/32 3 1/64
e Min. 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8F 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406
Weight 0.59 0.84 1.42 2.09 3.40 4.09 7.18 12.44
Note: 1.The"B"Dimensionsismeasuredacrosstheflatsoftheunionnut. 2. All Dimensions are in inches
3. Weights based on carbon steel (A105)
SPeCiFiCATioNS:ASme B16.11 ASme B1.20.1 - (NPT)
A
D E
BCF
A
BC
Type 601
Type 602bType 604
Type 602
TYPe DimeNSioNSSiZeS (iNCHeS)
1/8 18-NPT
1/4 18-NPT
3/8 18-NPT
1/2 14-NPT
3/4 14-NPT
1 11 1/2-NPT
1 1/4 11 1/2-NPT
1 1/2 11 1/2-NPT
2 11 1/2-NPT
TYPe 601, 602, 604
a 1 7/8 1 7/8 2 2 5/32 2 25/64 2 25/32 2 31/32 3 5/64 3 21/32B 1 1/4 1 1/4 1 3/8 1 21/32 2 2 3/8 2 3/4 3 3 23/32C 3/4 3/4 29/32 1 7/64 1 27/64 1 41/64 2 1/32 2 5/16 2 13/16
Style nut hex hex hex hex oCtagon oCtagon oCtagon oCtagon oCtagonWeight 0.37 0.34 0.43 0.68 1.06 1.51 2.19 2.58 4.83
TYPe 602B
a 1 3/4 2 2 11/64 2 7/16 2 3/4 2 15/16 3 7/64 3 21/32B 1 1/4 1 3/8 1 21/32 2 2 3/8 2 3/4 3 3 23/32C 3/4 29/32 1 1/8 1 27/64 1 41/64 2 1/32 2 5/16 2 13/16D 1 1 1/4 1 27/64 1 7/16 1 3/4 1 15/16 2 7/64 2 13/32
e Min. 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8F 0.555 0.690 0.855 1.065 1.330 1.675 1.915 2.406
Style nut hex hex hex oCtagon oCtagon oCtagon oCtagon oCtagonWeight 0.30 0.43 0.68 1.04 1.46 2.09 2.55 4.71
Note: 1.The"B"Dimensionismeasuredacrosstheflatsoftheunionnut. 2. All Dimensions are in inches 3. Weights based on carbon steel (A105)
FEATURES:•IdealforSteamService •Designsratedfor3000WOG/600WSP •Ball-to-ConeSeatsforsmoothalignment•Canberepeatedlyassembledand disassembled •Replaceableandinterchangableparts•Carbonsteelcomponentsarecoated to resist corrosion •Stayssealed-regardlessof shock, vibration, expansion and rough wrenching •SiliconBronzeandStainlessSteelseats double locked under 120,000 lbs, psi •Convenientlypackaged •SuitableforusewithSchedule40/80pipe•100%hydrotested •Type604ispreferredoverbronze to carbon steel seated unions
SPeCiFiCATioNS:ASme B16.11 - (SoCkeT DimeNSioNS oNlY) ASme B1.20.1 - (NPT)
19
rOCkWOOd uniOns
Type 601 Type 602
Product Comparison
Type 602B Type 604
A A AD E
A
B B B BC C CF C
Type 601 Type 602 Type 602B Type 604
SeAT mATeRiAl Silicon Bronze
Stainless Steel
Stainless Steel
Silicon Bronze (male)
Stainless (female)
eND CoNNeCTioN threaded threaded Socket Weld threaded
20
lug nuT uniOns
Class 3000Class 6000
Lug Nut unions from Bonney Forge are supplied with modified Stub Acme threads ideal for applications requiringrapidassemblyand/ordisassembly.
AAD E
B BC CF
ClASS DimeNSioNS SiZeS (iNCHeS)3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
3000
a 1 7/8 1 63/64 2 19/64 2 57/64 2 29/32 3 1/32 3 31/64 4 1/16 4 31/64 8 1/32B 2 9/16 3 3 5/8 4 1/4 5 5 5/8 6 3/8 7 3/16 8 10 23/64C 1 1/32 1 15/64 1 31/64 1 13/16 2 3/16 2 15/32 3 1/32 3 21/32 4 13/32 5 29/64D 1 1/8 1 15/64 1 19/64 1 57/64 1 29/32 2 1/32 2 15/64 2 13/16 3 15/64 6 17/32
e Min. 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4F 0.690 0.855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
Weight 0.59 0.91 3.12 2.28 3.48 4.66 7.07 11.40 15.42
6000
a 2 3/8 2 37/64 2 57/64 3 1/8 3 37/64 4 9/64 B 3 5/8 4 1/4 5 5 5/8 6 3/8 7 3/16 C 1 15/32 1 51/64 2 11/64 2 9/16 3 1/32 3 11/16 D 1 5/8 1 37/64 1 57/64 2 1/8 2 37/64 2 57/64
e Min. 3/8 1/2 1/2 1/2 1/2 5/8 F 0.855 1.065 1.330 1.675 1.915 2.406
Weight 1.95 2.84 3.96 7.00 14.16
SPeCiFiCATioNS:ASme B16.11 - (SoCkeT DimeNSioNS oNlY) ASme B1.20.1 - (NPT)
Note: 1. Seating characteristics of MSS SP-83 unions. 2.The"B"dimensionisthediameteracrossthelugsoftheunionnut.
3.Twinlugdesignofferedinsizesupto3/4"Class3000&1/2"Class6000 4.Tri-Lugdesignofferedinsizesfrom1"to3"Class3000&3/4"to2"Class6000. 5.Quad-Lugdesignofferedin4"Class3000.
21
TeChniCal infOrMaTiOn
pipe sChedule – eQuivalenCy
pipe pressure CalCulaTiOns
PressureRatingsforBonneyForgeForgedSteelFittingscomplywithASMEB16.11.Theallowablepressurerating for fittings are equivalent to the pressure ratings of the corresponding pipe listed in the table below. The fitting is suitable for the application if the application pipe nominal wall thickness is less than or equal to the nominalthicknessoftheScheduleNo./WallDesignationlistedbelow.
FiTTiNg ClASS FiTTiNg CoNNeCTioNPiPe eqUivAleNT
Schedule No. Wall Designation
2000 Threaded Sch. 80 xS
3000 Threaded Sch. 160 -
6000 Threaded - xxS
3000 Socket-Weld Sch. 80 xS
6000 Socket-Weld Sch. 160 -
9000 Socket-Weld - xxS
ASme B31.1 – 2012 ASme B31.3 - 2012
P = Pressure Rating
Se = Allowable Stress (@temperature)
tm = Wall Thickness
A = Corrosion Allowance (Typically = 0)
Do = outer Diameter of Pipe
Y = Table 104.1.2 (A) of ASme B31.1 (0.4 if temperature is less than 900°F)
P = Pressure Rating
D = outer Diameter of Pipe
S = Allowable Stress (@ Temperature): Table A-1
e = quality Factor: Table A-1A or A-1B
W = Weld Joint Strength Reduction Factor: Para. 302.3.5(e) (Typically = 1.0)
t = Pipe Wall Thickness
Y = Table 304.1.1 or intermediate Temperature interpolations (Below equation)
D = outer Diameter of Pipe
d = inside Diameter of Pipe
c = Sum of mechanical Allowances plus Corrosion and erosion Allowances. Threads: Dimension h of ASme B1.20. machined Surfaces or grooves: Specified Tolerance (or 0.02” plus Specified Depth of Cut; when tolerance is not specified)
P= _____________ t= _____________ or P= _____________
Y= _____________
2 Se (tm – A) PD 2 (SeW+PY)
d + 2c
2 (SeW+PY) D-2tY
D +d + 2c
Do – 2y (tm – A)
ReprintedfromASMEB31.1–2012andASMEB31.3–2012bypermissionofTheAmericanSocietyofMechanicalEngineers.Allrightsreserved. No further copies can be made without written permission.
BRANCH FITTINGS
AND SPECIALTY
FORGED PRODUCTS
SALES CENTER/WAREHOUSE 14496 CROGHAN PIKE
P.O. BOX 330 MT. UNION, PA 17066
(814) 542-2545 • (800) 231-0655 (800) 345-7546 • FAX (814) 542-9977
www.bonneyforge.come-mail: [email protected]
Pipet®, Vesselet® and Bosset® are trademarks registered for the exclusive use of WFI International.
WFI INTERNATIONAL A BONNEY FORGE COMPANY
4407 HAYGOOD STREET HOUSTON, TX 77022
(713) 695-3633 • (800) 231-0430 FAX (713) 695-3528
www.wfi-intl.come-mail: [email protected]
How to Order .......................................................................................... 4-5
Quality Control ............................................................................................ 5
Pipets® ................................................................................................... 6-19
Bossets® ............................................................................................. 20-22
Vesselets® ........................................................................................... 23-25
Special Tees .............................................................................................. 26
Wyes and Laterals ..................................................................................... 27
Specialty Products ............................................................................... 28-29
Flanges ..................................................................................................... 30
Consolidation Charts ........................................................................... 31-33
Table Of COnTenTs
2
Expertise, capability and desire.
These are the cornerstones for
success. They are also the same
three reasons why WFI has become
a world leader in the design and
manufacture of high quality forgings,
fittings, flanges, and a wide variety of
specialty items.
Founded in 1972, WFI has grown
from a few employees and 2,800
square feet of office and production
space to 150 employees and more
than 120,000 square feet of space
located on 13 acres.
Excellence in Quality is the standard
at WFI. We are recognized in the
industry for our superior Nuclear
Quality Assurance Program. Originally
awarded in 1977, WFI currently
holds a Quality System Certificate
(QSC 425) issued by ASME as a
Material Organization manufacturing
and supplying both ferrous and
non-ferrous materials. WFI’s Quality
Assurance Program is written to meet
ExcEllEncE in Quality is thE standard at WFi
the most stringent requirements of
ASME Section III, NCA3800, 10CFR50
Appendix B, 10CFR21, and ANSI
N45.2. In addition to these nuclear
standards, our quality program meets
the ever increasing demands of the
piping and pressure vessels codes
including ASME Section I and VIII,
B31.1, B31.3, B31.4, B31.8, API6A
PED Annex I Paragraph 4.3, TuV AD-
WO and the requirements of MIL-I-
45208A and MIL-STD-6875F.
All of WFI products are
competitively priced and we are at
your service 24-hours-a-day,
7-days-a-week. We maintain one
of the highest levels of on time
deliveries in our industry and our
professional sales and engineering
staff can always be reached to
assist you.
Our Mission
To be, today and in the future, the
recognized leader in our industry,
marketing and manufacturing
forged fittings, branch connections
and other related products
to satisfy our customer’s
expectations.
3
To be cost effective through Total
Quality performance of these
operations, and thus provide the
resources required to support
our commitment to improve our
products, processes and
customer service.
To be a law abiding corporate
citizen respecting the rights
of individuals, contributing to
the needs of the community
and conserving the state
of the environment.
hoW to ordEr Branch connEctions/WFi PiPEts
1. Specify Run or Header Size (For Consolidated Run Sizes see pages 30-32) 2. Specify Branch/Outlet Size 3. Specify Class, Schedule or Thickness:
• Socket-weld & Threaded Branches: Specify Header Size, Branch Size and Class (3000, 6000 & 9000) • Buttweld Branches: Specify Schedule or Thickness for both header and branch pipes: Std, XS, S160 etc.
4. Specify Branch Style
Pipet®
Buttweld Pipet® (BWP) Threaded Pipet® (THP) Socketweld Pipet® (SWP) BW/SW/THD Elbo Pipet®
(BEP, SEP, TEP) BW/SW/THD Lateral Pipet®
(BLP, SLP, TLP)
5. Select Material Specification
• Carbon Steel - SA/A105, SA/A105N, SA/A350-LF2 Class___, etc. • Stainless Steels: SA/A 182 F304L, F316L, F347, F321, F317/L, etc. • Chrome Moly: SA/A182 F11 Class___, F22 Class___, F5, F9, F91, etc. • Other: High Yield, Nickel/Nickel Alloys, Copper Nickel, Nickel Copper, Duplex, 6 Moly, Super Duplex, Titanium, etc.
4 5
WFI International craftsmanship is combined with rigid quality control systems to provide complete assurance of the highest manufacturing standards and compliance with applicable ASME and ASTM specifications. Every fitting manufactured is subjected to three separate quality control systems: one for material control, one for manufacturing control, and one for design control.
All forgings are inspected before being passed to the shipping room. Frequent analyses are made to check against mill documents. Accurate records are kept of every fitting, from initial forging bar through forging, heat treatment, machining, storage and shipment. Every single fitting is traceable to the exact material and process used in its manufacture.
In-house testing capabilities include:
Mechanical Testing: Tensile/Yield, Hardness and Charpy Magnetic Particle Examination Chemical Product Analysis Corrosion Testing Positive Material Identification (PMI) Macrostructure Examination Utrasonic Examination Microstructure Examination Liquid Penetrant Examination Ferrite Examination
Quality control
6. Specify Piping Code (if available):
Examples: ASME B31.1, B31.3, B31.4, B31.8, ASME See VIII & ASME Sec I
Branch Connection fittings are engineered fittings. Stock fittings are designed using "proof of design" Burst Tests. ASME B31.1 and ASME B31.3 codes accept Burst Test Design fittings. ASME Section III also accepts Burst Test Design fittings. ASME Sec VIII, Sec I, B31.4 and B31.8 require additional design considerations and Burst Test design stock fittings may not meet specific code requirements in certain applications. They, as well as some specifications, require area replacement calculations as proof of adequacy. The requirements are project specific and WFI must be consulted and provided with the following additional ordering information:
Design Code & Edition/Addenda Design Temperature Design Pressure Corrosion Allowance (if applicable) Design/Location Factor (if applicable)
hoW to ordEr Branch connEctions/WFi PiPEts (continuEd)
Butt-WEld
standard WEight
Extra strong
Each outlet size listed is available to fit any run curvature. BW Ends per B16.9 and B16.25. Design per MSS-SP-97.
RUN PIPE SIZES Outlet sizes 6" and less fit a number of run pipe sizes, and the fittings are marked accordingly. See page 30 for Pipet Consolidation Chart. SCHEDULES Standard Weight Fittings are the same as schedule 40 fittings through 10". A schedule 40 Butt-Weld Pipet for sizes 12" and larger is available. Dimensions and prices on application. Extra Strong Fittings are the same as schedule 80 fittings through 8". A schedule 80 Butt-Weld Pipet for sizes 10" and larger is available. Dimensions and prices on application. Pipe schedule numbers and weight designations are in accordance with ASME B36.10.FLATS A flat Butt-Weld Pipet fitting for use on welding caps, elliptical heads and flat surfaces is available.ORDERING When ordering a fitting, see page 4.
Although every attempt has been made to insure that the information contained in these tables is correct, WFI reserves the right to change the “B” and “C” dimensions as deemed necessary.
*The "C" dimension represents the waterway dimension of the fitting and does not include the minimal taper and radius required for manufacturing purposes. Installation holes in header should be based on actual fittings.
buTT-Weld PiPeT®
SA/A105 & SA/A350 LF2 CL1
6
1/8 5/8 7/8 0.269 0.081/4 5/8 7/8 0.364 0.083/8 3/4 1 0.493 0.101/2 3/4 1-1/8 0.622 0.123/4 7/8 1-1/2 0.824 0.221 1-1/16 1-13/16 1.062 0.321-1/4 1-1/4 2-1/4 1.38 0.641-1/2 1-5/16 2-9/16 1.625 0.782 1-1/2 3-5/16 2.313 1.142-1/2 1-5/8 3-21/32 2.500 1.943 1-3/4 4-9/32 3.125 2.603-1/2 1-7/8 5 3.548 4.454 2 5 -3/8 4.145 4.126 2-3/8 7-21/32 6.112 11.008 2-3/4 9-3/4 7.981 18.0010 3-1/16 12 10.020 27.2212 3-3/8 14-1/4 12.000 44.0014 3-1/2 15-1/2 13.250 56.0016 3-11/16 17-5/8 15.250 76.0018 3-13/16 19-3/4 17.250 97.0020 4 21-7/8 19.250 120.0024 4-9/16 26 23.250 194.6126 4-11/16 28-7/16 25.250 230.9030 5-3/8 32-5/8 29.250 335.2336 5-3/8 38-15/16 35.250 477.50
Dimensions
A B C*Outlet Size
Inches
Stan
dard
Appx. Weight Pounds
1/8 5/8 7/8 0.215 0.101/4 5/8 7/8 0.302 0.103/8 3/4 1 0.423 0.101/2 3/4 1-1/8 0.546 0.123/4 7/8 1-1/2 0.742 0.181 1-1/16 1-13/16 1.062 0.361-1/4 1-1/4 2-1/4 1.278 0.551-1/2 1-5/16 2-9/16 1.625 0.682 1-1/2 3-5/16 2.313 1.242-1/2 1-5/8 3-21/32 2.500 2.263 1-3/4 4-9/32 3.125 2.843-1/2 1-7/8 5 3.364 4.964 2 5-3/8 4.145 4.566 3-1/16 7-21/32 5.800 15.00 8 3-7/8 9-3/4 7.625 28.6610 3-11/16 12 9.750 36.1912 4-1/16 14-1/4 11.750 67.0014 3-15/16 15-1/2 13.000 72.2516 4-3/16 17-5/8 15.000 102.1018 4-3/8 19-3/4 17.000 129.7520 4-11/16 21-7/8 19.000 165.8524 5-1/2 26 23.000 262.1026 5-3/4 28-7/16 25.000 315.67
Dimensions
A B C*Outlet Size
Inches
Extra
Stro
ng
Appx. Weight Pounds
Larger outlet sizes available on application
Larger outlet sizes available on application
7
buTT-Weld PiPeT®
SA/A105 & SA/A350 LF2 CL1
Butt-WEld
schEdulE 160
xxs
1/2 1-1/8 1-1/4 0.464 0.243/4 1-1/4 1-1/2 0.612 0.391 1-1/2 1-3/4 0.815 0.621-1/4 1-3/4 2-1/4 1.160 1.161-1/2 2 2-3/4 1.338 1.802 2-3/16 3 1.689 2.292-1/2 2-7/16 4 2.125 3.023 2-7/8 4-7/16 2.624 6.344 3-5/16 5 -3/8 3.438 9.946 4-1/8 8-1/2 5.187 25.25
Dimensions
A B C*Outlet Size
Inches
Sche
dule
160
Appx. Weight Pounds
Each outlet size listed is available to fit any run curvature. BW Ends per B16.9 and B16.25. Design per MSS-SP-97.
RUN PIPE SIZES Outlet sizes 6" and less fit a number of run pipe sizes, and the fittings are marked accordingly. See page 30 for Pipet Consolidation Chart. SCHEDULES Pipe schedule numbers and weight designations are in accordance with ASME B36.10.FLATS A flat Butt-Weld Pipet fitting for use on welding caps, elliptical heads and flat surfaces is available.ORDERING When ordering a fitting, see page 4.
Although every attempt has been made to insure that the information contained in these tables is correct, WFI reserves the right to change the “B” and “C” dimensions as deemed necessary.
*The "C" dimension represents the waterway dimension of the fitting and does not include the minimal taper and radius required for manufacturing purposes. Installation holes in header should be based on actual fittings.
1/2 1-1/8 1-1/4 0.252 0.233/4 1-1/4 1-1/2 0.434 0.651 1-1/2 1-3/4 0.599 0.781-1/4 1-3/4 2-1/4 0.896 1.161-1/2 2 2-3/4 1.100 1.602 2-3/16 3 1.503 2.462-1/2 2-7/16 4 1.771 3.023 2-7/8 4-7/16 2.300 6.914 3-5/16 5 -3/8 3.152 11.006 4-1/8 8-1/2 4.897 32.94
Dimensions
A B C*Outlet Size
Inches
XXS
Appx. Weight Pounds
8
Threaded PiPeT®
SA/A105 & SA/A350 LF2 CL1
thrEadEd cl 3000
cl 6000
1/4 3/4 1-1/16 .437 0.143/8 13/16 1-1/16 .563 0.141/2 1 1-15/32 .718 0.283/4 1-1/16 1-45/64 .922 0.391 1-5/16 2-3/32 1.156 0.731-1/4 1-5/16 2-17/32 1.500 0.961-1/2 1-3/8 2-25/32 1.734 1.122 1-1/2 3-5/16 2.218 1.662-1/2 1-13/16 3-29/32 2.625 2.733 2 4-21/32 3.250 3.884 2-1/4 5-13/16 4.250 6.18
Dimensions
A B C*Outlet Size
Inches CL
300
0
1/4 3/4 1-1/16 .437 0.143/8 1-1/8 1-5/16 .563 0.141/2 1-1/4 1-3/4 .718 0.283/4 1-7/16 2-1/16 .922 0.391 1-9/16 2-17/32 1.156 0.731-1/4 1-5/8 2-1/2 1.484 0.961-1/2 1-11/16 3-5/16 1.734 1.122 2-1/16 3-31/32 2.218 1.66
Dimensions
A B C*Outlet Size
Inches
CL 6
000
Appx. Weight Pounds
Appx. Weight Pounds
Each outlet size listed is available to fit any run curvature. Threaded ends are in accordance with ANSI/ASME B1.20.1 Design per MSS-SP-97.
RUN PIPE SIZES Outlet sizes noted above fit a number of run pipe sizes, and the fittings are marked accordingly. See page 30 for Pipet Consolidation Chart.FLATS A flat Threaded Pipet for use on welding caps, elliptical heads and flat surfaces is available.ORDERING When ordering a fitting, see page 4.
Although every attempt has been made to insure that the information contained in these tables is correct, WFI reserves the right to change the “B” and “C” dimensions as deemed necessary.
*The "C" dimension represents the waterway dimension of the fitting and does not include the minimal taper and radius required for manufacturing purposes. Installation holes in header should be based on actual fittings.
9
sockEt WEld
cl 3000
cl 6000
sOCkeT-Weld PiPeT®
SA/A105 & SA/A350 LF2 CL1
1/4 3/4 1 0.364 3/8 0.143/8 13/16 1-1/16 0.493 7/16 0.141/2 1 1-15/32 0.622 9/16 0.283/4 1-1/16 1-45/64 0.824 9/16 0.391 1-5/16 2-3/32 1.049 25/32 0.731-1/4 1-5/16 2-17/32 1.38 23/32 0.961-1/2 1-3/8 2-25/32 1.61 3/4 1.122 1-1/2 3-5/16 2.067 13/16 1.662-1/2 1-13/16 3-29/32 2.469 3/4 2.733 2 4-21/32 3.068 15/16 3.884 2-1/4 5-13/16 4.026 1-1/16 6.60
Dimensions
A B C* EOutlet Size
Inches
1/2 1-1/4 1-3/4 0.464 13/16 0.283/4 1-7/16 2-1/16 0.612 15/16 0.391 1-9/16 2-17/32 0.815 1-1/32 0.731-1/4 1-5/8 2-1/2 1.160 1-1/32 0.961-1/2 1-5/8 3-5/16 1.338 1-1/16 1.632 2-1/16 3-31/32 1.687 1-3/8 1.66
Dimensions Outlet Size Inches
CL 3
000
CL 6
000
Appx. Weight Pounds
Appx. Weight Pounds
A B C* E
Each outlet size listed is available to fit any run curvature. Socket dimensions are in accordance with ASME B16.11. Design per MSS-SP-97.
RUN PIPE SIZES Outlet sizes noted above fit a number of run pipe sizes, and the fittings are marked accordingly. See page 30 for Pipet Consolidation Chart.FLATS A flat Socket-Weld Pipet for use on welding caps, elliptical heads and flat surfaces is available.ORDERING When ordering a fitting, see page 4.
Although every attempt has been made to insure that the information contained in these tables is correct, WFI reserves the right to change the “B” and “C” dimensions as deemed necessary.
*The "C" dimension represents the waterway dimension of the fitting and does not include the minimal taper and radius required for manufacturing purposes. Installation holes in header should be based on actual fittings.
10
buTT-Weld PiPeT®
STAINLESS & ALLOY
Butt-WEld
standard WEight
Extra strong
3/8 3/4 1 0.493 0.091/2 3/4 1-1/8 0.622 0.123/4 7/8 1-1/2 0.824 0.281 1-1/16 1-3/4 1.049 0.341-1/4 1-1/4 2-1/4 1.38 0.721-1/2 1-5/16 2-1/2 1.610 0.902 1-1/2 3 2.067 1.122-1/2 1-5/8 3-1/2 2.469 2.313 1-3/4 4 3.068 2.504 2 5 4.026 5.896 2-3/8 7-1/2 6.065 10.50
Dimensions
A B COutlet Size
Inches
Stan
dard
Appx. Weight Pounds
Each outlet size listed is available to fit any run curvature. BW Ends per B16.9 and B16.25. Design per MSS-SP-97.
RUN PIPE SIZES Outlet sizes 6" and less fit a number of run pipe sizes, and the fittings are marked accordingly. See page 31 for Pipet Consolidation Chart. SCHEDULES Standard Weight Fittings are the same as schedule 40 fittings through 10". A schedule 40 Butt-Weld Pipet for sizes 12" and larger is available. Dimensions and prices on application. Extra Strong Fittings are the same as schedule 80 fittings through 8". A schedule 80 Butt-Weld Pipet for sizes 10" and larger is available. Dimensions and prices on application. Pipe schedule numbers and weight designations are in accordance with ASME B36.10.FLATS A flat Butt-Weld Pipet fitting for use on welding caps, elliptical heads and flat surfaces is available.ORDERING When ordering a fitting, see page 4.
Although every attempt has been made to insure that the information contained in these tables is correct, Bonney Forge reserves the right to change the “B” and “C” dimensions as deemed necessary.
3/8 3/4 1 0.423 0.151/2 3/4 1-1/8 0.546 0.123/4 7/8 1-1/2 0.742 0.211 1-1/16 1-3/4 0.957 0.431-1/4 1-1/4 2-1/4 1.278 0.691-1/2 1-5/16 2-1/2 1.500 0.892 1-1/2 3 1.939 1.252-1/2 1-5/8 3-1/2 2.323 2.633 1-3/4 4 2.900 3.824 2 5 3.826 6.176 3-1/16 7-1/2 5.761 15.06
Dimensions A B C
Outlet Size Inches
Extra
Stro
ng
Appx. Weight Pounds
1/4 3/4 7/8 .438 0.143/8 13/16 1 .563 0.141/2 1 1-1/4 .703 0.283/4 1-1/16 1-1/2 .906 0.391 1-5/16 1-7/8 1.141 0.731-1/4 1-5/16 2-1/4 1.484 0.961-1/2 1-3/8 2-1/2 1.719 1.122 1-1/2 3 2.188 1.66
1/4 3/4 1 .438 0.143/8 1-1/8 1-1/4 .563 0.141/2 1-1/4 1-1/2 .703 0.283/4 1-7/16 1-3/4 .906 0.391 1-9/16 2-1/4 1.141 0.731-1/4 1-5/8 2-1/2 1.484 0.961-1/2 1-11/16 3 1.719 1.632 2-1/16 3-5/8 2.188 1.66
Each outlet size listed is available to fit any run curvature. Threaded ends are in accordance with ANSI/ASME B1.20.1 Design per MSS-SP-97.
RUN PIPE SIZES Outlet sizes noted above fit a number of run pipe sizes, and the fittings are marked accordingly. See page 31 for Pipet Consolidation Chart.FLATS A flat Threaded Pipet for use on welding caps, elliptical heads and flat surfaces is available.ORDERING When ordering a fitting, see page 4.
Although every attempt has been made to insure that the information contained in these tables is correct, WFI reserves the right to change the “B” and “C” dimensions as deemed necessary.
11
Threaded PiPeT®
STAINLESS & ALLOY
thrEadEd
cl 3000
cl 6000 Dimensions
A B COutlet Size
Inches
CL 3
000
Appx. Weight Pounds
Dimensions A B C
Outlet Size Inches
CL 6
000
Appx. Weight Pounds
1112
Each outlet size listed is available to fit any run curvature. Socket dimensions are in accordance with ASME B16.11. Design per MSS-SP-97.
RUN PIPE SIZES Outlet sizes noted above fit a number of run pipe sizes, and the fittings are marked accordingly. See page 31 for Pipet Consolidation Chart.FLATS A flat Socket-Weld Pipet for use on welding caps, elliptical heads and flat surfaces is available.ORDERING When ordering a fitting, see page 4.
Although every attempt has been made to insure that the information contained in these tables is correct, WFI reserves the right to change the “B” and “C” dimensions as deemed necessary.
sOCkeT-Weld PiPeT®
STAINLESS & ALLOY
sockEt WEld
cl 3000
cl 6000
1/4 3/4 7/8 0.364 3/8 0.143/8 13/16 1-1/16 0.493 7/16 0.141/2 1 1-1/4 0.622 9/16 0.283/4 1-1/16 1-1/2 0.824 9/16 0.391 1-5/16 1-7/8 1.049 25/32 0.731-1/4 1-5/16 2-1/4 1.38 23/32 0.961-1/2 1-3/8 2-1/2 1.61 3/4 1.122 1-1/2 3 2.067 13/16 1.66
1/2 1-1/4 1-3/8 .464 13/16 0.283/4 1-7/16 1-3/4 .612 15/16 0.391 1-9/16 2 .815 1-1/32 0.731-1/4 1-5/8 2-1/2 1.16 1-1/32 0.961-1/2 1-11/16 2-3/4 1.338 1-1/16 1.632 2-1/16 3-3/8 1.687 1-3/8 1.66
CL 6
000
Outlet Size Inches
Dimensions Appx. Weight Pounds
CL 3
000
Outlet Size Inches
Dimensions Appx. Weight Pounds A B C E
A B C E
13
lighTWeighT sChedule 10s, lW, and Cl300 PiPeTs®
Butt-WEld
thrEadEd
sockEt WEld
*Branch dimensions are in accordance with ASME B16.11 CL 3M.
Benefits• Reduces Welding Reduces weld volume and
welding time by more than 50% compared to traditional designs.
• Reduces Header Weld Cross Section Allows full penetration groove welds without “suck in” or distortion.
• Reduces Heat Build Up Reduces run pipe heat distortion.
• Is Used on All Run Pipe Thicknesses (CL300) S5s/10s & LW design can be used with any schedule or thickness run pipe in B16.5 Class 150 & Class 300 piping systems.
• Meets Piping Codes & Standards Burst Tests, Markl Fatigue Tests, Finite Element Analysis, MSS- SP-97, ASME B31.1 & B31.3, ASME/ANSI B16.9 & B16.11.
IdentificationSpecify Butt-Weld as follows: Light Wall x Branch Schedule: 10" LW x 2" S10s Run Schedule x Branch Schedule: 10" S10s x 2" S10s CL300 x Branch Schedule: 10" CL300 x 2" Std Wt*
Specify Socket-Weld & Threaded as follows:Light Wall x Branch Class: 10" LW x 2" CL 3M SWPRun Wall x Branch Class: 10" S10s x 2" CL 3M THD 10" S40s x 2" CL 3M SWP S10s
CL300 x Branch Class: 10" CL300 x 2" CL 3M THD
*Fittings designated CL300 can be installed on any run pipe thick-ness (S10s, Std, XS, S160, XXS) in B16.5 Class 150 or Class 300 Piping Systems.
**To obtain S10s/LW/CL300 design for run pipes thicker than S10s, either LW or CL300 must be specified.
NOTE: Although every attempt has been made to insure that the information contained in these tables is correct, WFI reserves the right to change the “C” dimension as deemed necessary.
See page 32 for consolidation chart.
Outlet Size
Inches
BUTT-WELD THREADED* SOCKET WELD
DimensionsAppx. Wt/Lb
DimensionsAppx. Wt/Lb
DimensionsAppx. Wt/Lb A C A C A
C
3M 5s 10s
C = ID of
specified branch
pipe
3M provided unless
otherwise specified
1/2 3/4 0.10 1 0.703 0.25 1 0.622 0.710 0.674 0.243/4 7/8 0.23 1-1/16 0.906 0.35 1-1/16 0.824 0.920 0.884 0.341 1-1/16 0.26 1-5/16 1.141 0.65 1-5/16 1.049 1.185 1.097 0.631-1/2 1-5/16 0.78 1-3/8 1.719 0.92 1-3/8 1.610 1.770 1.682 0.912 1-1/2 0.89 1-1/2 2.188 1.40 1-1/2 2.067 0.703 2.157 1.373 1-3/4 2.274 2 4.376 2-3/8 10.19
14
laTeral PiPeT®
45° connEctions
ForgEd
45° BRANCH CONNECTIONS THREADED, SOCKET-WELD AND BUTT-WELD ENDS
Also available for run sizes through 36". See footnotes at bottom of page 15.
Nominal Run Pipe
Size
Outlet Size
Dimensions
CL 3000 Threaded and Socket-Weld
CL 6000 Threaded and Socket-Weld
STD & XS Butt-Weld
Sch. 160 and XXS Butt-Weld
E E E E2-1/2 - 1-1/4 12 - 3 1/4 1-9/16 1-9/16 1-9/16
2-1/2 - 1-1/4 12 - 3 3/8 1-9/16 1-9/16 1-9/16
2-1/2 - 1-1/4 12 - 3 1/2 1-9/16 1-15/16 1-9/16 1-7/8
1-1/2 - 1-1/4 5 - 2 12 - 6
3/4 1-15/162-1/4 2-1/4
2-5/161-15/16 2-1/8
2-1/2 - 2 5 - 3 12 - 6
12-1/4 2-1/4
2-5/162-1/2
2-1/4 2-1/4
2-5/162-7/16
2-1/2 - 2 5 - 3 12 - 6
1-1/4 2-1/2 2-11/16 2-1/2 2-15/16
2-1/2 - 2 5 - 3 12 - 6
1-1/2 2-11/16 3-3/16 2-11/16 3-1/4
5 - 4 8 - 6 12 - 10
2 3-3/16 3-7/16
Order to Specific Run Pipe
Sizes
3
4
15
elbO PiPeT®
90° long radius
ForgEd
FOR ELBOW OUTLETS THREADED, SOCKET-WELD AND BUTT-WELD ENDS
Footnotes applying to the Elbo Pipet and Lateral Pipet:Socket Dimensions to ASME B16.11Thread Dimensions to ANSI/ASME B1.20.1Butt-Weld End Dimensions to ASME B16.9 & B16.25Each Elbo Pipet 2" & smaller is uniquely designed to fit all the elbow sizes shown. The complete size range interchangeability is so marked on the fitting.**Available as Butt-Weld outlets only. Larger sizes available - STD/XS/S160/XXS.
ORDERING When ordering fittings - see page 4.
Although every attempt has been made to insure that the information contained in these tables is correct, WFI reserves the right to change dimensions as deemed necessary.
The values listed are based on long radius elbows, twice the branch size listed.
Nominal Elbow Size
Inches
Outlet SizeInches
Dimensions
STD. Buttweld
XS Buttweld
CL 3000 THD and Socketweld
CL 6000 THD and Socketweld
E E E E
36 thru 3/4 36 thru 1
1/2 3/4
1-3/8 1-11/16
1-3/8 1-11/16
1-19/32 1-7/8
1-7/8 2-1/4
36 thru 2 36 thru 2
1 1-1/4
1-15/16 2-1/8
1-15/16 2-1/8
2-1/4 2-1/2
2-1/2 2-11/16
36 thru 2 36 thru 2
1-1/2 2
2-5/16 2-3/4
2-5/16 2-3/4
2-11/16 3-1/4
3-1/4
Order to Specific Elbow Sizes
**2-1/2 **3 **4
3-3/16 3-1/2 4-5/16
3-3/16 3-1/2 4-5/16
** **
16
niPPle PiPeT®
Plain End
thrEadEd End
*Available in lengths 4 1/2", 5 1/2" and 6 1/2"Weights based on Carbon Steel (.283 lbs/in3)
ORDERING When ordering fittings - see page 4.
Although every attempt has been made to insure that the information contained in these tables is correct, WFI reserves the right to change the “C” dimension as deemed necessary.
Integrally reinforced branch connection of one piece construction which eliminates costly welds and provides convenience of socket-weld and threaded ends for valves and instruments. Available in standard lengths of 3 1/2" and 6 1/2". Special lengths on request.
17
flanged PiPeT®
ovErviEW
ELIMINATE WELDS!
Don’t waste time and money making 3 welds... when the single weld WFI® Flanged Pipet® performs better!
FORGED ONE-PIECE CONSTRUCTION MEANS LESS WELDING.
WFI Flanged Pipets are available in any length, material, pipe wall thickness and flange rating.
WFI Flanged Pipets offer a simplified installation and provide more exacting tolerances where multiple flanges of constant height are required.
One-piece construction eliminates two extra stress points and the clean, seamless bore of-fers better performance. The base is contoured for attachment to a pipe, elbow or vessel.
RF, RTJ and other standard flanged faces are available.
• Excellent choice for hot tap applications. (When specified, hot tap configurations will be supplied.)
• Integrally reinforced, weld-on connection.• Exclusive design distributes stress more evenly and removes flow interruptions.• Available in all sizes, heights, wall thicknesses, and materials.
ordEring inFormation
Specify:• Header Size and Schedule• Outlet Size and Schedule• Flange Rating and Bore• Face Style (RF, RTJ, Etc.)• Design Standard (ASME B16.5 unless otherwise requested)
Example: 6" Std. Wt. x 2" 300# RF S80 Bore
AVAILABLE IN ALL FORGING-QUALITY MATERIALS.
OLD METHODBranch Connection–
Pipe-Weld Neck Flange
NEW METHODWFI® Flanged Pipet®
Thre
aded
& P
lain
End
Outlet Size Inches
Dimensions Appx. Weight PoundsA*
B
S/80 S/160 XXS1/2 3-1/2 0.546 0.464 0.252 0.45
3/4 3-1/2 0.742 0.612 0.434 0.64
1 3-1/2 0.957 0.815 0.599 0.92
1-1/4 3-1/2 1.278 1.160 0.896 1.40
1-1/2 3-1/2 1.500 1.338 1.100 1.72
2 3-1/2 1.939 1.687 1.503 2.50
Thre
aded
& P
lain
End
Outlet Size Inches
Dimensions Appx. Weight PoundsA*
C
S/80 S/160 XXS1/2 3-1/2 0.464 0.464 0.252 0.45
3/4 3-1/2 0.612 0.612 0.434 0.64
1 3-1/2 0.815 0.815 0.599 0.92
1-1/4 3-1/2 1.160 1.160 0.896 1.40
1-1/2 3-1/2 1.338 1.338 1.100 1.72
2 3-1/2 1.687 1.687 1.503 2.50
18
flanged PiPeT®
NOTES: Flange dimensions and tolerances are in accordance with published flange standards (ASME B16.5, API6A, etc.) Available in all standard facingsOutlet sizes greater than 2" NPS are available upon request.“A” dimensions other than 6" are available upon request.Flange thickness for Class 150 and Class 300 include 1/16" raised face.Flange thickness for Class 600, 1500 and 2500 does not include 1/4" raised face.Available under MIL-I-45208 and ASME Section III Quality Programs.
*For 1500 and 2500 Class when used as a Lateral Pipet or Elbo Pipet, the flange diameter may cause interference with the run pipe. For that reason in these products, WFI offers a standard “A” dimension of 9". If a shorter “A” dimension is required, it is recommended that you contact WFI.
cl 150
cl 300
cl 400 & 600
cl 900 & 1500
cl 2500
ELBO-FLANGED PIPET45° FLANGED PIPET
CL 2
500
CL 9
00 &
150
0CL
400
& 6
00CL
300
Outlet Flange Flange Bolt No. Bolt Size A O.D. Thk. Circle of Holes Hole
1/2 6 3.50 .44 2.38 4 .62 3/4 6 3.88 .50 2.75 4 .62 1 6 4.25 .56 3.12 4 .62 1 1/4 6 4.62 .62 3.50 4 .62 1 1/2 6 5.00 .69 3.88 4 .62 2 6 6.00 .75 4.75 4 .75 1/2 6 3.75 .56 2.62 4 .62 3/4 6 4.62 .62 3.25 4 .75 1 6 4.88 .69 3.50 4 .75 1 1/4 6 5.25 .75 3.88 4 .75 1 1/2 6 6.12 .81 4.50 4 .88 2 6 6.50 .88 5.00 8 .75 1/2 6 3.75 .56 2.62 4 .62 3/4 6 4.62 .62 3.25 4 .75 1 6 4.88 .69 3.50 4 .75 1 1/4 6 5.25 .81 3.88 4 .75 1 1/2 6 6.12 .88 4.50 4 .88 2 6 6.50 1.00 5.00 8 .75 1/2 6* 4.75 .88 3.25 4 .88 3/4 6* 5.12 1.00 3.50 4 .88 1 6* 5.88 1.12 4.00 4 1.00 1 1/4 6* 6.25 1.12 4.38 4 1.00 1 1/2 6* 7.00 1.25 4.88 4 1.12 2 9 8.50 1.50 6.50 8 1.00 1/2 6* 5.25 1.19 3.50 4 .88 3/4 6* 5.50 1.25 3.75 4 .88 1 6* 6.25 1.38 4.25 4 1.00 1 1/4 6* 7.25 1.50 5.12 4 1.12 1 1/2 9 8.00 1.75 5.75 4 1.25 2 9 9.25 2.00 6.75 8 1.12
CL 1
50
19
PiPeT®
hEavy Wall
ForgEd
Type 1 - Straight thru bore design
Type 2 - Conventional tapered bore design
The Heavy Wall Forged Pipet® is anintegrally reinforced branch connection.It provides the economical and engineering answer to the problem of welding outlet fittings on high pressure, high temperature piping and pressure vessels.
Run WallThickness 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3
BranchPipe Size A C A C A C A C A C A C A C A C A C A C
3 2-7/8 2.906 3-7/32 2.900 3-3/8 2.906 3-5/8 2.900 4-1/8 2.900 4-9/16 2.900 5 2.900 5-1/2 2.900 5-7/8 2.900 6-1/16 2.900
3-1/2 3-1/8 3.359 3-1/4 3.359 3-7/16 3.359 3-3/4 3.359 4-3/16 3.359 4-5/8 3.359 5-1/16 3.359 5-9/16 3.359 6 3.359 6-5/16 3.359
4 3-5/16 3.843 3-3/8 3.826 3-1/2 3.828 3-7/8 3.826 4-3/4 3.826 4-3/4 3.826 5-3/16 3.826 5-5/8 3.826 6-1/8 3.826 6-9/16 3.826
5 3-3/4 4.812 3-3/4 4.812 4 4.812 4-1/4 4.812 4-3/4 4.812 5-1/4 4.812 5-3/4 4.812 6-1/4 4.812 6-5/8 4.812 7-3/16 4.812
6 4-1/8 5.750 4-11/32 5.761 4-1/2 5.760 4-11/16 5.760 5-1/4 5.760 5-3/4 5.760 6-1/4 5.760 6-3/4 5.760 7-1/4 5.760 7-13/16 5.760
8 4-3/16 7.625 4-5/8 7.625 4-7/8 7.625 5-5/32 7.625 5-3/4 7.625 6-11/32 7.625 6-15/16 7.625 7-17/32 7.625 8-3/32 7.625 8-11/16 7.625
10 4-1/4 9.750 4-27/32 9.750 5 9.562 5-5/16 9.562 5-15/16 9.562 6-9/16 9.562 7-3/16 9.562 7-13/16 9.562 8-7/16 9.562 9-1/16 9.562
12 4-3/8 11.750 5-3/32 11.750 5-3/8 11.375 5-11/16 11.375 6-5/16 11.375 6-15/16 11.375 7-9/16 11.375 8-3/16 11.375 8-13/16 11.375 9-7/16 11.375
14 4-1/2 13 5-1/4 13 5-1/2 12.500 5-13/16 12.500 6-5/16 12.500 6-15/16 12.500 7-9/16 12.500 8-3/16 12.500 8-13/16 12.500 9-7/16 12.500
16 4-11/16 15 5-7/8 15 6 14.312 6-7/16 14.310 6-5/8 14.310 7-1/4 14.310 7-7/8 14.310 8-1/2 14.310 9-1/8 14.310 9-3/4 14.310
18 5-1/8 17 6-1/2 17 6-1/2 16.125 6-1/2 16.126 6-13/16 16.126 7-7/16 16.126 8-7/32 16.126 8-13/16 16.126 9-13/32 16.126 10-1/32 16.126
20 5-5/8 19 6-3/4 19 7 17.937 7-9/16 17.938 7-25/32 17.938 8-3/32 17.938 8-21/32 17.938 9-1/4 17.938 9-29/32 17.938 10-15/32 17.938
24 6-1/2 23 7-5/8 23 8 21.564 8-23/32 21.564 8-31/32 21.564 9-13/16 21.568 10-1/2 21.568 11 21.564 12-9/16 21.564 10-21/32 21.564
20
bOsseT®
• Designed in accordance with ANSI B16.11• Available in Class 3000-6000-9000-10000• Available in over 60 different materials• A weld-on connection in socket-weld, threaded or combination threaded and socket-weld designs• Forty different designs and combinations available. Please contact WFI for further details or visit our
web site at www.wfi-intl.com.
B-1 BossEt Combination Socket-Weld & Threaded Boss
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 38.1 50.8 50.8 50.8 50.8 63.5 IN 1 1/2 2 2 2 2 2 1/2 MM 17.9 23.4 29.4 37.7 43.7 56.0 IN 45/64 59/64 1 5/32 1 31/64 1 23/32 2 13/64
A
H
B-1-F BossEt Combination Socket-Weld & Threaded Insert Type Boss
Plug for Combination Socket-Weld & Threaded Boss
B-2 BossEt Socket-Weld Boss
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 40 65.1 65.1 65.1 65.1 63.5 IN 1 1/2 2 2 2 2 2 1/2 MM 65.1 65.1 65.1 65.1 65.1 85.7 IN 2 2 2 2 2 3 3/8
BRANCH PIPE I.D.
A 3000 LB
A 6000 LB
H
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 38.1 50.8 50.8 50.8 50.8 63.5 IN 1 1/2 2 2 2 2 2 1/2 MM 17.9 23.4 29.4 37.7 43.7 56.0 IN 45/64 59/64 1 5/32 1 31/64 1 23/32 2 13/64
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 44.5 46.0 52.4 52.4 52.4 65.1 IN 1 3/4 1 13/16 2 1/16 2 1/16 2 1/16 2 9/16 MM 21.3 26.7 33.4 42.2 48.3 60.3 IN .840 1.050 1.315 1.660 1.900 2.375
A
H
A
H
21
bOsseT®
• Designed in accordance with ANSI B16.11• Available in Class 3000-6000-9000-10000• Available in over 60 different materials• A weld-on connection in socket-weld, threaded or combination threaded and socket-weld designs• Forty different designs and combinations available. Please contact WFI for further details or visit our
web site at www.wfi-intl.com.
B-3 BossEt Threaded Boss
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 38.1 50.8 50.8 50.8 50.8 63.5 IN 1 1/2 2 2 2 2 2 1/2 MM 17.9 23.4 29.4 37.7 43.7 56.0 IN 45/64 59/64 1 5/32 1 31/64 1 23/32 2 13/64
A
H
B-4 BossEt Threaded Boss with Weld Ring
B-5 BossEt Threaded Thermowell Boss
B-6 BossEt Socket-Weld Boss with Weld Ring
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 33.3 34.9 42.9 47.6 50.8 57.2 IN 1 5/16 1 3/8 1 11/16 1 7/8 2 2 1/4 MM 23.8 27.0 33.3 42.9 49.2 61.9 IN 15/16 1 1/16 1 5/16 1 11/16 1 15/16 2 7/16
A
E
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 47.6 50.8 60.3 66.7 79.4 85.7 IN 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 MM 25.4 30.2 36.5 44.5 50.8 63.5 IN 1 1 3/16 1 7/16 1 3/4 2 2 1/2
A
E
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 33.3 34.9 42.9 47.6 50.8 57.2 IN 1 5/16 1 3/8 1 11/16 1 7/8 2 2 1/4 MM 23.8 27.0 33.3 42.9 49.2 61.9 IN 15/16 1 1/16 1 5/16 1 11/16 1 15/16 2 7/16
A
E
23
VesseleT®
ovErviEW
THE VESSELET IS A CONTOURED INTEGRALLY REINFORCED INSERT BRANCH CONNECTION
WHEN DO YOU SPECIFY A VESSELET®?
When you need: • Fully interpretable radiographic or ultrasonic weld examination• Longer life under cyclic fatigue loading• An insert fitting that is fully engineered and supported by Markl fatigue tests, burst tests, finite element analysis and years of successful experience in actual service
FEATURES OF THE VESSELET®
• True butt-weld installation in header• Outlets available in butt-weld, socket-weld, threaded & flanged configurations• Designed for easy installation• Low stress intensification factor (sif)• Available in outlet size range to 60”• Available in over 60 different alloys• Meets all the requirements of the applicable codes & standards
Butt-weld for ease of NDT or inservice inspection
Welds directly into header or vessel for total integral type construction
ordEring inFormation
Required for all Codes:
1. Header (run) size & schedule or wall thickness2. Outlet size & schedule or wall thickness3. Material4. Quantity
Note: In the absence of any other information, WFI will supply fittings proven by burst test. Applicable codes are B131.1, B31.3 & ASME III
For ASME VIII, ASME Sec. 1, B31.4 & 8, additional service conditions are required. This enables WFI to insure that the Vesselet® provided meets the code requirements. These codes do not accept product line proof testing. They, as well as some speci-fications, require area replacement as proof of adequacy. These requirements are project specific and require additional ordering information as listed below.
1. Design Code2. Design temperature3. Design pressure4. Corrosion allowance (if applicable)
22
bOsseT®
• Designed in accordance with ANSI B16.11• Available in over 60 different materials• A weld-on connection in socket-weld, threaded or combination threaded and socket-weld designs• Forty different designs and combinations available.
B-11 BossEt Threaded Drill-Thru Extended Boss
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 47.6 50.8 60.3 66.7 79.4 85.7 IN 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 MM 5.6 9.5 15.1 22.2 26.2 35.7 IN 7/32 3/8 19/32 7/8 1 1/32 1 13/32
A
F
B-12 BossEt Socket-Weld Drill-Thru Extended Boss
B-13 BossEt Combination Socket-Weld & Threaded Drill-Thru Extended Boss
accEss holE x-ray Plugs
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 47.6 50.8 60.3 66.7 79.4 85.7 IN 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 MM 5.6 9.5 15.1 22.2 26.2 35.7 IN 7/32 3/8 19/32 7/8 1 1/32 1 13/32
3000 LB 6000 LB
Outlet Size
DN 15 20 25 32 40 50 NPS 1/2 3/4 1 1 1/4 1 1/2 2MM 47.6 50.8 60.3 66.7 79.4 85.7 IN 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 MM 5.6 9.5 15.1 22.2 26.2 35.7 IN 7/32 3/8 19/32 7/8 1 1/32 1 13/32
A
F
A
F
H = Customer Specified Length
1" (25) For pipe wall thickness over 1 3/8" (34.9 - 76.2) 1 1/2" (40) For pipe wall thickness over 3" - 5" (76.2 - 127.0) 2" (50) For pipe wall thickness over 5" (127.0)
1" (25) For pipe wall thickness 5/8" - 1 3/8" (15.9 - 34.9)
25
safeTy relief ValVe VesseleT®
Safety Relief Valve Vesselets®
Special support nozzle designed to reduce flow induced vibrations. Engineered for tem-perature, pressure and flow conditions. Also considers fatigue and is designed to accom-modated stresses induced from opening and closing of the valve and seismic conditions.
Designed by WFI utilizing proven technology from ASME, WRC and SwRI.
A safety relief valve requires more from its attachment nozzle than pressure/temperature protection.
WFI’s Safety Relief Valve Vesselt® (SRVV) adds protection for:
• Flow induced vibration
• Seismic loads
• Reaction forces
• Premature Seat failure
FILL OUT THE INFORMATION BELOW AND RETURN TO WFI FOR A QUOTE:
ovErviEW
Process Fill in below
Line Size/Wall Thickness
Steam Flow (lbs/hr)
Steam Pressure
Steam TemperatureMaterial
Line Material
SRVV MaterialValve
Weight
Set Pressure
Rated Capacity (lbs/hr)
Inlet ID
Weld Prep (if required)
Outlet ID
In order to do seismic analysis, WFI needs either the seismic acceleration or Universal Building Code Zone.
In order to analyze the reaction forces, WFI needs a sketch of your layout or the dimensions listed on the typical layout sketch (Figure 1).
A Offset of Discharge Elbow (24" Default) ___________________
B Height of Seat _________________
C Max, Min, or WFI Optimizes ___________________
D Elbow Schedule (S/40 Default) ___________________
E Valve Lift Time _________________ (from Valve Mfg. .04 sec. Default)
Note: Default Valves are used when none are given to complete the analysis
DEFAULTS Outlet Nom. Size Height Used 3" 6" 4" 8" 6" 8" 8" 10"
SRVV Designed for Vibration Control plus Pressure/Temperature and Fatigue Endurance
24
VesseleT®
conFigurations
sizEs, WEights & dimEnsions
LATERAL & ELBO VESSELETS®
Integrally reinforced, contoured-insert type branch connection ideally suited for cyclical and high pres-sure/temperature services. Patented design reduces weld volume, and lends itself to non-destructive examination. May be used to replace seamless re-ducing laterals. Available in butt-weld, socket-weld, threaded, and flanged configurations.
THERMALET®
Integrally reinforced contoured-insert type branch connections, threaded (class 3000 and class 6000) and flanged (class150 thru class 2500) for thermowells in heavily insulated pipes. Moves attachment weld away from instrument tap. Patented design reduces weld volume, and lends itself to non-destructive examination.
FLANGED VESSELET®
Integrally reinforced contoured insert type branch connections with integral flange outlet (class 150 thru class 2500). Eliminates flange attachment weld. Customized projection heights available.
Special Shapes and Configurations for Problems Specific to the Piping IndustryThe following patents apply: 262,397 274,549 4,438,955 282,867 4,450,613 (foreign patents also)
STUDDET®
Designed for mating flanges to vessels or tanks utilizing contoured insert type connection. Available in all flange sizes and pressure ratings. Patented design reduces weld volume, and lends itself to non-destructive examination.
Backed by complete testing programWFI has conducted comprehensive burst tests of Vesselts®. Additionally, WFI has conducted fatigue tests to offer more directly applicable data for stress intensification factor (sif) calcu-lations, which are of major importance in piping system analysis.
WFI offers full engineering capability to develop special configurations and designs, and to perform analysis of those designs using in-house finite element analysis.
1/2 1-1/4 0.803/4 1-1/4 0.901 1-1/4 1.101-1/4 1-1/4 1.301-1/2 1-3/4 1.752 1-1/2 3.193 1-11/16 6.904 2-1/16 12.036 2-11/16 24.458 3 44.1410 3-1/8 63.3312 3-5/16 98.3714 3-5/8 122.0016 3-3/4 141.9018 4-5/8 173.7020 5-1/8 208.0024 5-5/8 313.00Bu
tt-W
eld
Vess
elet
- Si
zes,
Wei
ghts
& D
imen
sion
s Outlet Size Inches
Dimensions Appx. Weight Pounds A Installation OD
OD’s vary by
application
“A” Dimensions shown are nominal for STD x STD and XS x XS. Other Schedules may vary.
27
seamless fOrged Wyes and laTerals
During the last 5 years, WFI has invested more than $4 million in new NC/CNC machine tools and forging dies to more efficiently produce large seamless Wyes and Laterals for the power and energy industries. WFI also utilizes in house programs including Finite Element Analysis and Three-Dimensional CAD/CAM to assist in the drawing, design and machining of these parts.
These investments give WFI the ability to produce fittings such as Wyes and Laterals with as near as uniform wall as possible while main-taining the strength of the fitting using the pressure area method of design and finite element analysis where required. WFI understands that uniform wall thickness and smooth rounded external and internal surfaces are extremely important as they relate to both thermal stress and stresses from external forces that these parts experience in service. Seamless Laterals and Wyes, used primarily in high pressure steam lines and in high pressure subsea piping are subject to high thermal and reaction stresses due to excessive section thickness compared to the mating pipe. WFI’s unique manufacturing process allows us to produce these parts with maximum radiuses and a more uniform wall thickness which results in greatly reducing these stresses.
ovErviEW
SEAMLESS REDUCING LATERAL
SEAMLESS SIZE-ON-SIZE WYE
26
seamless fOrged sPeCial Tees
ovErviEW
SEAMLESS SIZE-ON-SIZE TEE
WFI designs and manufactures Seamless Tees to meet all ASME Code requirements including ASME Section I, Section III, Section VIII, ASME B31 Codes, ASME B16.9, WFI’s Tees are also broadly used in API and MSS applications.
WFI Seamless Tees are ideal for high pressure process and refinery piping, subsea lines, topside manifold piping, subsea risers, steam lines and boiler piping. Our manufacturing process allows us to quickly make tees with heavy walls, tees with non standard reductions, and tees in hard to find material grades.
WFI also manufactures true “Seamless” Barred and Target/Cushion tees. WFI Seamless Barred Tees have integral bars that are not welded into the branch. These are ideal for subsea corrosion resistant alloy tees where welding may affect material properties in heat affected zones. WFI Seamless Target/Cushion Tees are forged with one end of the run solid. This provides a 90 degree flow path through one end of the run and out the branch. Target Tees are normally provided with center to end dimensions in accordance with ASME B16.9 dimensions for buttwelding tees for new piping installations. They can also be manufactured with center to end dimensions equal to those required for buttweld elbows to replace elbows in existing piping systems. Target tees are broadly used for erosive flow conditions such as those found in topside or subsea manifolds in offshore oil and gas production.
WFI Tees are available in Carbon Steel, Low Temp, High Yield, Chrome Moly, Stainless, 6 Moly, Duplex, Super Duplex, Nickel, Nickel Alloys, Nickel Copper and Copper Nickel.
SEAMLESS TARGET TEE
29
sPeCialTy PrOduCTs
FlangEs
Designed and engineered by WFI or to customers specifications. Available in all material grades and sizes.
saFE End/transition PiEcE
Forged flanges available in all B16, MSS, API, AWWA, and METRIC standards including orifice and anchor flanges. Project specific designs, special materials, and rush deliveries available.
nozzElEt®
A traditional insert welding outlet contoured to fit the inside diameter of the run pipe vessel wall. Available in butt-weld and flanged configurations.
studding outlEt
Designed for mating flanges to vessels or tanks economically. Manufactured for either I.D. or O.D. installation. Available in all flange sizes and pressure ratings. Provides the strength and safety the vessel code requires.
28
sPeCialTy PrOduCTs
sWagE niPPlEs*
Available in hard to find material grades and in reducing sizes. Designed in accordance with B16.9, B16.11 and B16.28. WFI forged shapes guaranteed to meet minimum wall thickness with no thinning.
ForgEd shaPEs
WFI design provides special integral reinforcement at critical stress concentration areas. Available as concentric and eccentric in all material grades. All end finishes and special reductions are available. Complies to MSS-SP-95.
stuB Ends
* Non Commodity Items
Designed in accordance with B16.9 (ASA) or MSS-SP-43. Available in all sizes and material grades.
rEducErs & caPs
Forged seamless concentric and eccentric reducers designed in accordance with B16.9 and MSS-SP-75. Caps available in butt-weld and threaded configurations in accordance with B16.9, B16.11, ASME Sec I and Sec VIII. These products available in all material grades and sizes.
WFI specializes in special forgings and fittings of any shape, size or material. Modern forging and machining equipment, in-house engineering and design, in-house heat treatment and a complete metallurgical testing lab make WFI a fast, reliable source for virtually any type of piping or pressure vessel component. We can build from your drawings and specifications or help recommend a stronger, more versatile design.
31
engineering sPeCifiCaTiOns
PiPEt® consolidation chart a105/350 lF2
HOW IT WORKS
Each outlet size indicated on the chart is designed to fit a number of Run Pipe sizes, e.g., the 1/2" fitting marked 36 - 1 1/4" x 1/2" will fit all Run Pipe sizes from 1 1/4" to 36". When placed on a 36" Run Pipe, there will be a maximum radial gap of 1/16" between the top of the Run Pipe and the base of the fitting at the crotch as shown on the sketch. This gap is negligible when welding.
THE PIPET MEANS REDUCED INVENTORY
The chart above outlines the full range of THP, SWP and BWP size consolidation. This chart has been devised and the fitting designed to substantially minimize warehouse inventory. All fittings are manufactured and marked as shown on the chart.
Outlet Size Inches 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 6
Butt-Weld Pipet, STD (BWP) 1 - 1/2 2 - 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 6 36 - 1 1/4 36 - 2 1/2 3 1/2 - 1 1/4 2 - 1 1/2 3 1/2 - 2 3 - 2 1/2 4 - 3 4 - 3 1/2 6 - 5 8 36 - 4 6 - 2 1/2 36 - 4 6 - 3 1/2 10 - 5 6 - 5 10 - 8 10 36 - 8 36 - 8 36 - 12 14 - 8 20 - 12 14 - 12 36 - 16 36 - 22 18 - 16 24 - 20 34 - 26 42 - 36
Butt-Weld Pipet, XS (BWP) 3/4 - 1/2 1 1/2 - 3/4 1 2 - 1 1/4 1 1/2 2 2 1/2 3 4 6 36 - 1 36 - 2 3 -1 1/4 5 - 2 1/2 3 1/2 - 2 3 - 2 1/2 4 - 3 4 - 3 1/2 6 - 5 8 36 - 3 1/2 36 - 6 36 - 4 6 - 3 1/2 10 - 5 6 - 5 10 - 8 10 36 - 8 36 - 12 14 - 8 20 - 12 14 - 12 36 - 16 36 - 22 18 - 16 24 - 20 34 - 26 42 - 36
Socket-Weld Pipet, 3000# (SWP) 1/4 1/2 - 3/8 1 - 1/2 1 1/4 - 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 36 - 3/8 36 - 3/4 36 - 3/4 36 - 1 1/2 2 1/2 - 1 1/4 2 - 1 1/2 2 1/2 - 2 3 1/2 - 2 1/2 3 1/2 - 3 4 - 3 1/2 6 - 5 36 - 3 3 1/2 - 2 5 - 3 6 - 4 6 - 4 6 - 5 10 - 8 36 - 4 36 - 6 36 - 8 36 - 8 14 - 6 20 - 12 36 - 16 36 - 22
Socket-Weld Pipet, 6000# (SWP)
36 - 1/4 36 - 3/8 1/2 1 - 3/4 1 1 - 1/4 1 - 1/2 2 2 1/2 3 1/2 - 3 4 36 - 3/4 36 - 1 1/4 2 1/2 - 1 1/4 4 - 1 1/2 2 1/2 - 2 3 1/2 - 2 1/2 3 1/2 - 3 5 - 4 5 36 - 3 36 - 5 5 - 3 6 - 4 6 - 4 10 - 6 8 - 6 36 - 6 36 - 8 18 - 8 26 - 12 14 - 10 36 - 20 36 - 28 36 - 16
Threaded Pipet, 3000# (THP) 3/8 - 1/4 1 - 3/8 1/2 1 1/4 - 3/4 1 1 1/2 - 1 1/4 1 - 1/2 2 2 1/2 3 4 36 - 1/2 36 - 1 1/4 36 - 3/4 36 - 1 1/2 2 1/2 - 1 1/4 3 1/2 - 2 2 1/2 - 2 3 1/2 - 2 1/2 3 1/2 - 3 4 - 3 1/2 6 - 5 36 - 3 36 - 4 5 - 3 6 - 4 6 - 4 14 - 6 10 - 8 36 - 6 36 - 8 36 - 8 36 - 16 12 16 - 14 20 - 18 36 - 22
Threaded Pipet, 6000# (THP) 3/8 - 1/4 1 - 3/8 1/2 3/4 1 1/4 - 1 1 1/2 - 1 1/4 1 - 1/2 2 2 1/2 3 4 36 - 1/2 36 - 1 1/4 36 - 3/4 2 1/2 - 1 2 1/2 - 1 1/4 3 1/2 - 2 2 1/2 - 2 3 1/2 - 2 1/2 3 1/2 - 3 3 1/2 5 36 - 1 1/2 36 - 3 8 - 4 5 - 3 6 - 4 5 - 4 4 6 36 - 10 36 - 6 36 - 8 10 - 6 6 - 5 10 - 8 26 - 12 12 - 8 18 - 12 36 - 28 36 - 14 36 - 20
45° Lateral Pipets, (BLP-SLP-TLP) 3/8 - 1/4 1 - 3/8 1/2 3/4 1 1/4 - 1 1 1/2 - 1 1/4 1 - 1/2 2 36 - 1/2 36 - 1 1/4 36 - 3/4 2 1/2 - 1 2 1/2 - 1 1/4 3 1/2 - 2 2 1/2 - 2 3 1/2 - 2 1/2 36 - 1 1/2 36 - 3 8 - 4 5 - 3 6 - 4
For Run Pipe Consolidations and Branch Pipe Sizes not listed on chart, please contact WFI.30
anChOr flanges
WELDING NECK ANCHOR FLANGES
Anchor flanges are important elements in many thrust-control systems, especially those protecting pipeline pumping stations. Welded into the line and encased in concrete, they immobilize the pipe at predetermined locations and transfer built-up stresses to external structures.
For example, in cross-county pipelines end forces of considerable magnitude are generated by internal pressure and temperature changes. A 24" O.D. x 0.594" wall pipe in a pipeline operating at 1100 psi and subjected to a 90° rise in metal temperature, for example, will develop total thrust of 1,000,000 lbs. Unless these forces are properly controlled, they can damage pumps, valves and other close-tolerance equipment.
Anchor Flanges may be used to secure subsea piping and risers to platform structures.
ovErviEW
REQUIRED FOR ALL CODES
1. Design Code
2. Material
3. Design Pressure
4. Design Temperature
5. Installation Temperature
6. Allowable Concrete Bearing Stress
7. Corrosion Allowance
8. Run Pipe Diameter
9. Run Pipe Schedule Thickness
10. Other applicable moment and load information
ordEring inFormation
32
engineering sPeCifiCaTiOns
stainlEss - chromE - alloy PiPEt® consolidation chart
HOW IT WORKS
Each outlet size indicated on the chart is designed to fit a number of Run Pipe sizes, e.g., the 1/2" fitting marked 36 - 1 1/4" x 1/2" will fit all Run Pipe sizes from 1 1/4" to 36". When placed on a 36" Run Pipe, there will be a maximum radial gap of 1/16" between the top of the Run Pipe and the base of the fitting at the crotch as shown on the sketch. This gap is negligible when welding.
THE PIPET MEANS REDUCED INVENTORY
The chart above outlines the full range of THP, SWP and BWP size consolidation. This chart has been devised and the fitting designed to substantially minimize warehouse inventory. All fittings are manufactured and marked as shown on the chart.
REF. FIG. UW-16.1(a) SECTION VIII DIVISION 1 For Run Pipe Consolidations and Branch Pipe Sizes not listed on chart, please contact WFI.
Outlet Size Inches1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4
Butt-Weld Pipet, STD (BWP) & Socket-Weld Pipet, 3000# (SWP)1/4 36 - 3/8
1/2 - 3/8 36 - 3/4
1 - 1/2 36 - 1 1/4
2 - 3/4 36 - 2 1/2
1 3 1/2 - 1 1/4 36 - 4
1 1/4 2 - 1 1/2 6 - 2 1/2 36 - 8
1 1/2 3 - 2 8 - 3 1/2 36 - 10
2 3 - 2 1/2 6 - 3 1/2 16 - 8 36 - 18
2 1/2 3 1/2 - 3 5 - 4 12 - 6 24 - 14 36 - 26
3 4 - 3 1/2 6 - 5 14 - 8 36 - 16
3 1/2 4 6 - 5 10 - 8 24 - 12 36- 26
4 5 6 10 - 8 20 - 12 36 - 22
Butt-Weld Pipet, XS (BWP)36 - 1/4 3/8
36 - 1/23/4 - 1/2 36 - 1
1 1/2 - 3/4 36 - 2
1 3 - 1 1/4 36 - 3 1/2
2 - 1 1/4 5 - 2 1/2 36 - 6
1 1/2 2 1/2 - 2 8 - 3 36 - 10
2 3 - 2 1/2 6 - 3 1/2 14 - 8 36 - 16
2 1/2 4 - 3 8 - 5 20 - 10 36 - 22
3 4 - 3 1/2 6 - 5 16 - 8 32 - 18 36 - 34
3 1/2 4 6 - 5 12 - 8 34 - 14 36
4 5 6 10 - 8 20 - 12 36 - 22
Butt-Weld Pipet, S160 (BWP)1/2 36 - 3/4
1 - 3/4 36 - 1 1/4
2 - 1 36 - 2 1/2
1 1/4 4 - 1 1/2 36 - 5
2 1/2 - 1 1/2 6 - 3 36 - 8
2 3 - 2 1/2 10 - 3 1/2 36 - 12
3 - 2 1/2 5 - 3 1/2 18 - 6 36 - 20
3 1/2 - 3 5 - 4 10 - 6 26 - 12 36 - 28
4 5 6 8 14 - 10 36 - 16
Socket-Weld Pipet, 6000# (SWP)36 - 1/4 36 - 3/8 1/2
36 - 3/41 - 3/4 36 - 1 1/4
2 - 1 36 - 2 1/2
1 1/4 4 - 1 1/2 36 - 5
2 1/2 - 1 1/2 6 - 3 36 - 8
2 3 - 2 1/2 10 - 3 1/2 36 - 12
2 1/2 3 - 3 1/2 6 - 4 18 - 8 36 - 20
3 3 1/2 4 5 6 10 - 8 22-12 26 - 24 36 - 30
4 5 6 8 10 14 - 12 20 - 16 36 - 22
Butt-Weld Pipet, XXS (BWP)36 - 1/2 36 - 3/4 1
36 - 1 1/42 1/2 - 1 1/4 36 - 3
4 - 1 1/2 36 - 5
3 1/2 - 2 8 - 4 36 -10
4 - 2 1/2 10 - 5 36 - 12
4 - 3 10 - 5 20 -12 36 - 22
4 6 - 5 14 - 8 36 -16
Socket-Weld Pipet, 9000# (SWP)36 - 1/2 36 - 3/4 1
36 - 1 1/42 1/2 - 1 1/4 36 - 3
4 - 1 1/2 36 - 5
3 1/2 - 2 8 - 4 36 -10
Threaded Pipet, 3000#, 6000# (THP)3/8 - 1/4 36 - 1/2
1 - 3/8 36 -1 1/4
1/2 1 1/2 - 3/4 36 - 2
3/4 2 1/2 - 1 36 - 3
1 1/4 - 1 4 - 1 1/2 36 - 5
1 1/2 - 1 1/4 3 1/2 - 2 8 - 4 36 - 10
1 1/2 2 3 1/2 - 2 1/2 10 - 4 36 - 12
2 2 1/2 4 -3 10 - 5 18 - 12 36 - 20
2 1/2 3 1/2 - 3 5 - 4 10 - 6 26 - 12 36 - 28
3 3 1/2 4 6 - 5 12 - 8 36 - 14
4 5 6 10 - 8 18 - 12 36 - 20
33
engineering sPeCifiCaTiOns
lightWEight schEdulE 10s, lW, and class 300 - stainlEss PiPEt consolidation chart
HOW IT WORKS
Each outlet size indicated on the chart is designed to fit a number of Run Pipe sizes, e.g., the 1/2" fitting marked 36 - 1 1/4" x 1/2" will fit all Run Pipe sizes from 1 1/4" to 36". When placed on a 36" Run Pipe, there will be a maximum radial gap of 1/16" between the top of the Run Pipe and the base of the fitting at the crotch as shown on the sketch. This gap is negligible when welding.
THE PIPET MEANS REDUCED INVENTORY
The chart above outlines the full range of THP, SWP and BWP size consolidation. This chart has been devised and the fitting designed to substantially minimize warehouse inventory. All fittings are manufactured and marked as shown on the chart.
For Run Pipe Consolidations and Branch Pipe Sizes not listed on chart, please contact WFI.
Outlet Size Inches1/2 3/4 1 1 1/2 2 3 4
Butt-Weld Pipet, LW or CL300 and Sch. 10S1 1/4 - 1/2 36 - 1 1/2
2 1/2 - 1 36 - 3
1 1/2 - 1 4 - 2 36 - 5
2 3 - 2 1/2 10 - 3 1/2 36 - 12
3 - 2 1/2 5 - 3 1/2 18 - 6 36 - 20
3 1/2 4 5 8 - 6 14 - 10 42 - 16
5 6 10 - 8 18 - 12 44 - 20 72 - 46
Butt-Weld Pipet, CL300 x STD.1 -1/2 36 - 1 1/4
2 - 3/4 36 - 2 1/2
3 1/2 - 1 1/4 36 - 4
3 - 2 8 - 3 1/2 36 - 10
3 - 2 1/2 6 - 3 1/2 16 - 8 36 - 18
4 - 3 1/2 6 - 5 14 - 8 36 - 16
5 6 10 - 8 20 - 12 36 - 22
Socket Weld Pipet, LW or CL300 x CL 3000, and 10S x CL30001 -1/2 36 - 1 1/4
2 - 3/4 36 - 2 1/2
3 1/2 - 1 1/4 36 - 4
3 - 2 8 - 3 1/2 36 - 10
3 - 2 1/2 6 - 3 1/2 16 - 8 36 - 18
4 - 3 1/2 6 - 5 14 - 8 36 - 16
5 6 10 - 8 18 - 12 44 - 20 72 - 46
Threaded Pipet, LW or CL300 x CL 3000, and 10S x CL30001 1/2 - 3/4 36 - 2
2 1/2 - 1 36 - 3
1 1/4 - 1 4 - 1 1/2 36 - 5
2 3 1/2 - 2 1/2 10 - 4 36 - 12
2 1/2 4 - 3 10 - 5 18 - 12 36 -20
3 1/2 4 6 - 5 12 - 8 36 - 14
4 5 6 10 - 8 18 - 12 36 - 20
Physical Address 1509 Riverport RoadKingsport, TN 37660
Physical Address 400 Natalie Boulevard
Loudon, TN 37774
Kingsport TN: 423-765-9991 | Loudon TN: 865-458-2333
FOR QUESTIONS OR TO REQUEST A QUOTE, VISIT WWW.PROCESSSUPPLY.COM OR CALL
W E A R E A V A I L A B L E 2 4 / 7