WATERPROOFING AND GENERAL CONSTRUCTION

WATERPROOFING, SUBSTRATE PREPARATION AND GENERAL CONSTRUCTION SYSTEMS

CONTENTS

This catalogue is designed for quick reference. Please refer to product datasheets and packaging for detailed instructions.

ARDEX INTRODUCTIONARDEX Group 4ARDEX Vision 5ARDEX Innovation 6ARDEX Support 7SystemARDEX 7ARDEX and Our Environment 8ARDEX Australia – Committed to the Local Market 8ARDEX Digital Services 9Relevant Standards 10Warranty and Quality Assurance 10Technical Support Information 11Ongoing Professional Development 12

PRODUCT INFORMATIONTable of Properties – Liquids 14Table of Properties – Sheets 16

LIQUID APPLIED MEMBRANESAcrylic, Polyurethane and SBR Membranes 19Epoxy Membranes, Sealers and Adhesives 26Primers and Reinforcement Materials 27

ARDEX SHEET MEMBRANESButynol® and TPO 32Cover Boards and Insulation 34Torch-applied and Self-Adhesive Membranes 35WeldTec Weldable Membranes 40Hydrophilic Rubber Joints 43Drainage Systems and Geotextile Fabric 44Butynol® Accessories 46TPO & Bitumen Accessories 47WeldTec Accessories 48

GENERAL CONSTRUCTIONRepair Mortars 50Anodes and Bonding Agents 52Construction Grout 53Renders and Primer Additive 54Joint Sealants 56Crack Repair and Injection 57Concrete Crack Lock 61Crack Repair and Injection Accessories 62

DISCLAIMERDisclaimer 63

DIGITAL SERVICESDigital Services 64

INTRODUCTION

ABOUT ARDEX

ARDEX GROUP

As one of the leading building material manufacturers, the ARDEX Group is represented in over 100 countries.

ARDEX system solutions have been making buildings better all over the world. From the Burj Khalifa in Dubai, the London Olympic Aquatic Centre, the Sydney Opera House and commercial and residential projects big and small. ARDEX systems provide reliability and support that are always tailored to the specific requirements of the project.

Strong growth and intelligent acquisitions in foreign and local markets enables the ARDEX Group to draw from a global pool of resources. This allows ARDEX to ultimately supply complete system solutions which include market leading, high quality products and services to its valued customers.

For more than 70 years, ARDEX has been the quality leader for an entire industry, offering engineered products and systems in the areas of floor levelling and adhesives, tile and natural stone systems, sheet and liquid applied waterproofing membranes, general construction and decorative surfaces.

Production/ Warehousing Warehousing only

ARDEX GROUP AT A GLANCE:1949 Founded

1966 ABA Launched in Australia

3,000+ Employees

38+ Production Facilities

53+ Subsidiaries

The Burj Khalifa, Dubai, UAE.

4

“The ARDEX Group is the leading solution and service provider of innovative building systems.”

Family owned Company with people of integrity that are engaged and empowered

Customer centricity via direct end user engagement

Diversifying our products, services and channels including via digital platforms

Enhancing production, quality control and product development through digital technologies

Sustainability in our processes and solutions fostering social responsibility

Unique and efficient building and construction systems through agile innovation

ARDEX VISION

5

ARDEX INNOVATION

A world of experience… providing engineered solutions for waterproofing and general construction projects.

ARDEX Australia is part of the ARDEX Group, a company founded in Germany in 1949, that has grown to become a global business, providing engineered solutions for flooring, waterproofing and tiling applications.

Our waterproofing and general construction solutions are highly application specific. From sub-floor to roofing, we have developed products that stand the test of time – and moisture. Non-failure in these areas, even under extreme conditions, is critical which is why so many professionals rely on ARDEX.

Innovation has been a key influencer to this continued success, with technologies introduced many years ago still unique in their respective industries today. Being part of the Global ARDEX Group, ARDEX Australia has access to a huge research and development resource which is continually developing world unique products and technologies.

6

TECHNICAL SUPPORT INFORMATION

ARDEX is committed to being the leading provider of technical support in the field. We believe our responsibility does not end with the manufacture of innovative, technically superior products. Therefore, our team of technical advisers works with contractors and specifiers, as well as with the ARDEX R&D team to provide solutions for specific applications. Some of these common solutions are published in ARDEX Technical Bulletins which are on the ARDEX Australia website.

Contact our Technical Services department for help with anything out of the ordinary, if we don’t already have the answer we will certainly investigate.

Technical Services Toll Free 1800 224 070 (Australia) 0800 227 339 (NZ)

Technical Data is available on the ARDEX website www.ardexaustralia.com and the ARDEX Australia mobile app.

Some examples include:

• The largest field team of trained professionals • Project specific installation recommendations • Job start-up and walk through support • Local and national training • Contractor recommendation • Extensive digital resources

7

ARDEX AUSTRALIA – COMMITTED TO THE LOCAL MARKET

• Localised Research and Development – Formulations designed in Australia for Australian conditions • Five local manufacturing sites – Products made close to market • Seven distribution centres – Products available when you need them • Local Technical Team – Support and backup wherever you are • Customer service and sales support in every state

ARDEX AND OUR ENVIRONMENT

As part of our ongoing commitment to the environment ARDEX is constantly improving our existing range and developing new products to reduce our ecological footprint.

The indoor air quality of buildings is also enhanced by using ARDEX products. The performance leading and most commonly used ARDEX waterproofing and general construction products have been independently tested to the Green Building Council Green Star Specification for Office Design (IEQ-11) and Office Interior (IEQ-13). ARDEX products that meet the benchmark for VOC credit in the Green Building Council of Australia’s Rating Tools are marked with the following icon within this product catalogue.

8

The ARDEX Specification Tool provides on-demand system solutions for waterproofing, flooring,

remedial or tiling scenarios. Simply answer project specific questions and a complete system

recommendation, including products and application methods, are provided for immediate

download.

This selector takes the guesswork out of choosing the best tile

adhesive based on tile types and project substrates.

Visualise how ARDEX grouts match up to the colours of your chosen

tiles by using the ARDEX online grout colour selector.

Never be caught short again. Find out the amount of material you will

need for your project by using the instant online product calculator.

From quick reference specification sheets, to product information

papers and technical bulletins, ARDEX has a range of online

resources designed to help you, no matter the size of the project.

ON-DEMAND SPECIFICATION TOOL

TILE ADHESIVE SELECTOR

GROUT COLOUR SELECTOR

PRODUCT CALCULATORS

RESOURCES

24/7 RESOURCES

9

RELEVANT STANDARDS

WARRANTY AND QUALITY ASSURANCE

• AS 3740 – 2010 Waterproofing of wet areas within residential buildings • AS 4858 – 2004 Wet Area Membranes • AS 4654.2 – 2012 Waterproofing membrane systems for exterior use:

– Above Ground Level – Materials – Above Ground Level – Design and Installation

ARDEX products are generally warranted for 10–20 years when installed to relevant Australian Standards and applicable ARDEX specifications, technical data sheet and instruction for application and use.

The ARDEX Australia Guarantee or Warranty covers the: • repair or replacement of the product PLUS; • the costs of re-installation of the product PLUS; • the costs of replacement of any immediate covering such as tiles or carpet.

Product Warranty A product warranty is applicable on all ARDEX products for a period of between 10–20 years depending on the product. ARDEX warrant that their manufactured product is free from defects as well as being suitable for the purpose for which it is intended, that is as long as it has been applied in accordance with the ARDEX published literature.

SystemARDEX WarrantyThe SystemARDEX Warranty is project specific and warrants that the SystemARDEX combination of products that forms the total system are free from defects, are 100% compatible and the system combination is suitable for the purpose intended. The SystemARDEX Warranty is designed for applications involving multiple ARDEX products that form a system for a particular purpose. For example, floor surface preparation prior to laying vinyl may include up to five different ARDEX products and the total SystemARDEX combination would be warranted as being free from defects, totally compatible and suitable for a particular project application.

Extended Warranty For an extended warranty or one that includes an installation of non-standard product combinations (e.g. product combinations that are not detailed in our published data sheets) you need to contact the ARDEX Technical Services Department on 1800 224 070 prior to the installation for our best recommendations.

10

ARDEX products are backed by a team of Technical Support Specialists and Field Professionals dedicated to one goal – eliminating guesswork, improving onsite efficiencies and taking risk out of product and system installation.

ARDEX is committed to providing the highest level of technical support – from product training to customised system recommendations. ARDEX have a dedicated team of technical experts to help you at any stage with:• System recommendations• Onsite assistance and demonstrations• Complaint investigation

SYSTEM ARDEX

ARDEX is committed to developing products that are easy to use and offer high performance. ARDEX products are designed to work together for total reliability and performance. Each product is the careful result of research and development combining the input of contractors, specifiers and installers to ensure absolute product compatibility backed by a guarantee. This is System ARDEX.

TECHNICAL SUPPORT

11

The building industry, like any other, requires on-going training to keep up with the changes in legislation/standards and materials (tiles, concrete, substrates, etc.). ARDEX offers training for applicators as well as distributors and retailers of ARDEX product. The idea of the ARDEXacademy is to permanently share knowledge and expertise with customers.

Training is carried out by an ARDEX team of technical experts who have extensive knowledge and practical experience of the tiling, flooring, waterproofing and general construction industry. There are many courses available that can be booked via the ARDEX Australia website, including:

• ARDEX Undertile Liquid Waterproofing Accreditation Training • ARDEX Floor Levelling Training • ARDEX Undertile WeldTec Installation Training • ARDEX Epoxy Grout Training • ARDEX Retail Tile Training • ARDEX Large Format Thin Porcelain Tile Panel Installation

12

PRODUCT INFORMATION

WATERPROOFING, SUBSTRATE PREPARATION AND GENERAL CONSTRUCTION SYSTEMS

LIQ

UID

MEM

BR

AN

ES

Prod

uct

Kit size

Use

des

crip

tion

No. of parts

No. of coats

W.F.T. per coat (mm)

D.F.T. per coat (mm)

Total coverage/ kit (m2)

Recoat time minimum

Recoat time maximum

Full cure time

Thinning and cleaning up

New

nam

eO

ld n

ame

ARD

EX W

PM 0

01Su

perfl

ex P

rem

ixed

Bath

room

and

Bal

cony

15L

Unde

r tile

wat

erpr

oof m

embr

ane

for w

alls

12

0.5

0.25

152

hrs

inde

f.3

days

wat

erUn

der t

ile w

ater

proo

f mem

bran

e fo

r floo

rs1.

00.

507.

5

ARD

EX W

PM 0

02Su

perfl

ex T

wo

Part

Bath

room

and

Bal

cony

20L+

20kg

Unde

r tile

wat

erpr

oof m

embr

ane

for w

alls

22

0.6

0.40

242

hrs

inde

f.3

days

wat

erUn

der t

ile w

ater

proo

f mem

bran

e fo

r floo

rs0.

90.

6016

ARD

EX W

PM 1

55

Rapi

d15

LUn

der t

ile w

ater

proo

f mem

bran

e fo

r wal

ls1

20.

50.

2517

.22

hrs

inde

f.3

days

wat

erUn

der t

ile w

ater

proo

f mem

bran

e fo

r floo

rs1.

00.

258.

6

ARD

EX W

PM 1

5720

kgM

oist

ure

cure

d po

lyur

etha

ne m

embr

ane

for

reta

inin

g w

alls

and

pla

nter

s1

1–2

1.0

1.0

133

hr16

hrs

1 da

yxy

lene

ARD

EX W

PM 1

7915

LSi

ngle

com

pone

nt r

ubbe

r wat

erpr

oofin

g m

embr

ane

12

1.0

0.5

82–

4 hr

sn/

a24

–48

hrs

wat

er

ARD

EX W

PM 2

65Sh

elte

rcoa

t Prim

er W

ater

Base

d20

L W

ater

bas

ed p

rimer

for

ARD

EX u

nder

tile

mem

bran

es1

1n/

an/

a12

01

hr8

hrs

4 hr

sw

ater

ARD

EX W

PM 2

70Sh

elte

rcoa

t Prim

er S

olve

nt

Base

d20

L So

lven

t bas

ed p

rimer

for

unde

r tile

mem

bran

es1

1n/

an/

a12

030

m

ins

8 hr

s4

hrs

xyle

ne

ARD

EX W

PM 3

00H

ydrE

poxy

300

4LEf

flore

scan

t bar

rier

21

0.3

0.15

124

hrs

48 h

rs7

days

wat

er20

L60

ARD

EX W

PM 3

00H

ydrE

poxy

300

4LTw

o co

mpo

nent

wat

er b

ased

epo

xy m

oist

ure

barr

ier

22

0.3

0.15

64

hrs

48 h

rs7

days

wat

er20

L30

AR

DEX

WP

M 3

6820

kgSi

ngle

com

pone

nt c

opol

ymer

moi

stur

e ba

rrie

r1

20.

30.

1560

2–4

hrs

5 da

ys7

days

wat

er

14

TAB

LE O

F PR

OPE

RTI

ES –

LIQ

UID

S

LIQ

UID

MEM

BR

AN

ES S

EALE

RS,

AD

HES

IVES

AN

D A

DD

ITIV

ES

Prod

uct

Kit size

Use

des

crip

tion

No. of parts

No. of coats

W.F.T. per coat (mm)

D.F.T. per coat (mm)

Total coverage/ kit (m2)

Recoat time minimum

Recoat time maximum

Full Cure time

Thinning and cleaning up

New

nam

eO

ld n

ame

AR

DEX

WP

M 3

10Sh

elte

rgua

rd15

L

Sem

i per

mea

ble

roof

faça

de m

embr

ane

12

0.3

0.15

24

4 hr

s2–

3 da

ys7

days

wat

er

Low

per

mea

bilit

y

roof

mem

bran

e1.

00.

507

AR

DEX

WP

M 3

30Fa

çade

Mem

bran

e15

LFa

çade

mem

bran

e1

20.

350.

175

202

hrs

2–3

days

24 h

rsw

ater

AR

DEX

WP

M 4

05Sh

elte

rcre

te A

dditi

ve20

L

Slur

ry c

oat

1

12.

0n/

a10

0Be

fore

Su

rfac

e Dr

ying

24 h

rs

wat

erSc

reed

or r

ende

r1

2 to

30n/

a1.

3/m

m16

hrs

n/a

24 h

rs

Tem

pora

ry w

ater

proo

fing

21.

0n/

a24

16 h

rs21

day

s24

hrs

AR

DEX

WP

M 9

0815

LLi

ght f

oot t

raffi

cabl

e m

embr

ane

13

0.40

0.20

12.5

4 hr

s2–

3 da

ys4

days

wat

er

AR

DEX

WP

M 8

1215

LM

oist

ure

cure

d, p

olyu

reth

ane

mem

bran

e1

21.

51.

512

2 hr

s24

hrs

7 da

ysso

lven

t or

m

ethy

late

d sp

irits

AR

DEX

WP

M 8

12SL

15L

Self-

leve

lling

pol

yure

than

e m

embr

ane

12

1.25

1.25

122

hrs

24 h

rs7

days

solv

ent o

r

met

hyla

ted

spiri

ts

AR

DEX

WP

M 8

1336

kgC

hem

ical

res

ista

nt s

eam

less

floo

r co

atin

g2

12-

52-

512

2 hr

s24

hrs

7 da

ysso

lven

t or

m

ethy

late

d sp

irits

AR

DEX

WP

M 8

2115

LAl

ipha

tic p

olyu

reth

ane

coat

ing

12

0.3

0.15

602

hrs

24 h

rs7

days

wat

er

AR

DEX

WP

M 8

2218

kgPo

lyur

etha

ne to

p co

at fo

r lo

w to

med

ium

pe

dest

rian

traf

fic2

20.

30.

1560

2 hr

s24

hrs

7 da

ysso

lven

t or

m

ethy

late

d sp

irits

AR

DEX

WP

M 8

2318

kgPo

lyur

etha

ne to

p co

at fo

r ve

hicu

lar

traf

fic2

20.

30.

1560

2 hr

s24

hrs

7 da

ysso

lven

t or

m

ethy

late

d sp

irits

15

TAB

LE O

F PR

OPE

RTI

ES –

LIQ

UID

S

16

TAB

LE O

F PR

OPE

RTI

ES –

SH

EETS

SHEE

T M

EMB

RA

NES

Prod

uct

Type

Reinforcement type

Reinforcement Weight (gsm)

Rolls per pallet

Roll length (m)

Roll width (m)

Normal edge lap (mm)

Nom

inal

th

ickn

ess/

wei

ght

per

m²

Surf

ace

finis

h (t

op/b

otto

m)

New

nam

eO

ld n

ame

BU

TYN

OL®

RO

OFI

NG

AR

DEX

BU

TYN

OL®

1.0

Buty

nol®

Sta

ndar

dBu

tyl r

ubbe

rn/

an/

an/

a17

.86

1.4

501.

0mm

Blac

k

AR

DEX

BU

TYN

OL®

1.5

Buty

nol®

Med

ium

1.5m

mBl

ack

or G

rey

TPO

RO

OFI

NG

AR

DEX

WPM

612

Ther

mop

last

ic

poly

olefi

nPo

lyes

ter

n/a

n/a

30.5

1.52

75–1

501.

14m

mG

rey

AR

DEX

WPM

612

FL

Ther

mop

last

ic

poly

olefi

nPo

lyes

ter

n/a

n/a

30.5

3.05

75–1

501.

14m

mG

rey

AR

DEX

WPM

615

Ther

mop

last

ic

poly

olefi

nPo

lyes

ter

n/a

n/a

30.5

275

–150

1.5m

mW

hite

BAS

E SH

EETS

AR

DEX

WPM

114

APP

with

SB

S St

rips

Poly

este

r/

Gla

ss18

023

81.

010

0–15

04.

0mm

Sand

ed P

olym

er/

Ther

mo-

Adhe

sive

Str

ips

AR

DEX

WPM

116

F/B

Base

She

etAP

PN

on-w

oven

Po

lyes

ter

120

2810

1.05

502.

7mm

Torc

h Fi

lm/F

leec

e

TOR

CH

-ON

MEM

BR

AN

ES

AR

DEX

WPM

150

3/16

0 M

embr

ane

APP

Combined polyester/

glass

150

2810

1.0

753.

0mm

Sand

/Tor

ch F

ilm

AR

DEX

WPM

185

Min

eral

Mem

bran

eAP

P18

020

81.

075

4.0m

mG

rey,

Sla

te/T

orch

Film

AR

DEX

WPM

188

SBS

180

2810

1.0

753.

0mm

Torc

h Fi

lm/T

orch

Film

AR

DEX

WPM

444

APP

Poly

este

r18

023

101.

010

04.

1mm

Sand

or T

alc/

Po

lyth

ene

Film

17

TAB

LE O

F PR

OPE

RTI

ES –

SH

EETS

SHEE

T M

EMB

RA

NE

AD

HES

IVES

AN

D S

OLV

ENTS

Prod

uct

Type

Cov

erag

eD

ry t

ime

Cle

an u

pN

ew n

ame

Old

nam

e

AR

DEX

WPM

240

Shel

terb

it Pr

imer

Bi

tum

en c

ut5m

²/L

1–2

hour

sAR

DEX

WA

98 S

AR

DEX

WA

98 A

WA

Adhe

sive

Solv

ent-b

ased

con

tact

4.8m

²/L

15–6

0 m

inut

esAR

DEX

WA

98 S

AR

DEX

WA

98 S

WA

Solv

ent

Hyd

roca

rbon

n/a

n/a

n/a

SHEE

T M

EMB

RA

NES

(con

t’d)

SELF

-AD

HES

IVE

SBS

SHEE

TS

AR

DEX

WPM

117

SBS

Fibr

egla

ssn/

a25

151.

010

02.

0To

rch

Film

/ Se

lf-Ad

hesi

ve

AR

DEX

WPM

30

00X

Shel

ters

eal 3

000

SBS

n/a

n/a

2520

1.0

601.

5PE

She

et

UN

DER

TILE

MEM

BR

AN

ES

AR

DEX

WPM

750

Synt

hetic

ru

bber

n/a

n/a

n/a

201.

440

0.75

mm

Poly

prop

ylen

e

AR

DEX

WPM

10

00

Synt

hetic

ru

bber

n/a

n/a

n/a

201.

440

1.2m

mPo

lypr

opyl

ene

WEL

DA

BLE

MEM

BR

AN

ES

AR

DEX

Roo

t Rep

ell

Synt

hetic

ru

bber

n/a

n/a

n/a

201.

440

1.2m

mPo

lypr

opyl

ene

AR

DEX

WPM

150

0Fl

eece

d-lin

edn/

an/

an/

a20

1.4

1.5

1.5m

mPo

lypr

opyl

ene

SHEE

T M

EMB

RA

NES

Prod

uct

Type

Reinforcement type

Reinforcement Weight (gsm)

Rolls per pallet

Roll length (m)

Roll width (m)

Normal edge lap (mm)

Nom

inal

th

ickn

ess/

wei

ght

per

m²

Surf

ace

finis

h (t

op/b

otto

m)

New

nam

eO

ld n

ame

BU

TYN

OL®

RO

OFI

NG

AR

DEX

BU

TYN

OL®

1.0

Buty

nol®

Sta

ndar

dBu

tyl r

ubbe

rn/

an/

an/

a17

.86

1.4

501.

0mm

Blac

k

AR

DEX

BU

TYN

OL®

1.5

Buty

nol®

Med

ium

1.5m

mBl

ack

or G

rey

TPO

RO

OFI

NG

AR

DEX

WPM

612

Ther

mop

last

ic

poly

olefi

nPo

lyes

ter

n/a

n/a

30.5

1.52

75–1

501.

14m

mG

rey

AR

DEX

WPM

612

FL

Ther

mop

last

ic

poly

olefi

nPo

lyes

ter

n/a

n/a

30.5

3.05

75–1

501.

14m

mG

rey

AR

DEX

WPM

615

Ther

mop

last

ic

poly

olefi

nPo

lyes

ter

n/a

n/a

30.5

275

–150

1.5m

mW

hite

BAS

E SH

EETS

AR

DEX

WPM

114

APP

with

SB

S St

rips

Poly

este

r/

Gla

ss18

023

81.

010

0–15

04.

0mm

Sand

ed P

olym

er/

Ther

mo-

Adhe

sive

Str

ips

AR

DEX

WPM

116

F/B

Base

She

etAP

PN

on-w

oven

Po

lyes

ter

120

2810

1.05

502.

7mm

Torc

h Fi

lm/F

leec

e

TOR

CH

-ON

MEM

BR

AN

ES

AR

DEX

WPM

150

3/16

0 M

embr

ane

APP

Combined polyester/

glass

150

2810

1.0

753.

0mm

Sand

/Tor

ch F

ilm

AR

DEX

WPM

185

Min

eral

Mem

bran

eAP

P18

020

81.

075

4.0m

mG

rey,

Sla

te/T

orch

Film

AR

DEX

WPM

188

SBS

180

2810

1.0

753.

0mm

Torc

h Fi

lm/T

orch

Film

AR

DEX

WPM

444

APP

Poly

este

r18

023

101.

010

04.

1mm

Sand

or T

alc/

Po

lyth

ene

Film

LIQUID APPLIED MEMBRANES

ACRYLIC, POLYURETHANE, EPOXY AND SBR MEMBRANES

TWO COMPONENT UNDERTILE WATERPROOFING MEMBRANE

SINGLE COMPONENT UNDERTILE WATERPROOFING MEMBRANE

ARDEX WPM 002 is a tough, rapid drying two component waterproofing membrane specifically designed for use under tiles.

• Rapid drying time – can be tiled over in 16–24 hrs • Fibre reinforced – no need for reinforcing mat • BRANZ Appraisal #701 for undertile

waterproofing • Low VOC – meets Green Building Council of

Australia Green Star IEQ-13 requirements

TYPICAL APPLICATIONS

Internal and external wet areas, balconies, decks, and other areas that will be tiled or otherwise protected by regular foot traffic.Suitable for permanent immersion (when tiled over).

SUBSTRATES

Concrete, renders and screeds, fibre cement*, plasterboard*, plywood*.*Not recommended for external applications.

COVERAGE • Floors: 16m² (2 coats) D.F.T. – 1.2mm • Walls: 24m² (2 coats) D.F.T. – 0.8mm

COLOURS • Liquid: Light Grey/Green • Powder: Off White

DRYING TIMES • Recoat time: 1–2 hrs • Ready to tile: 16–24 hrs • Full cure: 3 days

VOC CONTENT

25g/L

PACKAGING CODE

20kg pail/20kg bag 8000082

ARDEX WPM 001 is a tough, ready to use waterproofing membrane specifically designed for use under tiles.

• Fibre reinforced – no need for reinforcing mat • Advanced acrylic – will not re-emulsify

once cured • BRANZ Appraisal #702 for undertile

waterproofing • Low VOC – meets Green Building Council of

Australia Green Star IEQ-13 requirements

TYPICAL APPLICATIONS

Internal wet areas, balconies, decks, and other areas that will be tiled or otherwise protected by regular foot traffic.

SUBSTRATES

Concrete, renders and screeds, fibre cement*, plasterboard*, plywood*.*Not recommended for external applications.

COVERAGE • Floors: 7.5m² (2 coats) D.F.T. – 1.0mm • Walls: 15m² (2 coats) D.F.T. – 0.5mm

COLOURS

Blue Viscous Paste

DRYING TIMES • Recoat time: 1–2 hrs • Ready to tile: 48 hrs • Full cure: 3 days

VOC CONTENT

18g/L

PACKAGING CODE

20kg 10593

ARDEX WPM 001(Superflex Bathroom and Balcony Premixed)

ARDEX WPM 002(Superflex Bathroom and Balcony Two Part)

19

ACR

YLI

C, P

OLY

UR

ETH

AN

E A

ND

SB

R M

EMB

RA

NES

ARDEX WPM 157 is a one component moisture cured polyurethane system for waterproofing planter box internals, roof and deck areas (that are to be paved or covered) and landscaped decks.

• Excellent flexibility – accommodates building movement

• Single component – ready to use, no mixing required

• Excellent chemical resistance • Low VOC – meets Green Building Council of

Australia Green Star IEQ-13 requirements

TYPICAL APPLICATIONS

Planter box internals, landscaped decks, roof and deck areas (that are to be paved or covered).

SUBSTRATES

Concrete, renders, screeds, compressed fibre cement and fibre cement*.

COVERAGE

Approx. 13m² (1–2 coat) D.F.T. – 1.0mm

COLOURS

Grey

DRYING TIMES • Recoat time: 3 hrs • Dry through: 24 hrs

VOC CONTENT

121g/L

PACKAGING CODE

20kg pail 20313

ONE PART MOISTURE CURED POLYURETHANE MEMBRANE

ARDEX WPM 155 Rapid is a water based polyurethane-acrylic waterproofing membrane developed for high performance under-tile waterproofing.

• Fast drying Polyurethane acrylic membrane • Excellent film build – easy to gauge thickness • Class III membrane – in accordance with

AS4858 requirements • Low VOC – meets Green Building Council of

Australia Green Star IEQ-13 requirements

TYPICAL APPLICATIONS

Internal and external wet areas, balconies, decks, and other areas that will be tiled or otherwise protected by regular foot traffic.

SUBSTRATES

Concrete, renders, screeds, compressed fibre cement, fibre cement*, plasterboard* and plywood*.*Not recommended for external applications.

COVERAGE • Walls: 17.2m² (2 coats) D.F.T. – 0.5mm • Floors: 17.2m² (2 coats) with ARDEX STB

Tape – D.F.T. – 0.5mm • Floors: 8.6m² (2 coats) D.F.T. – 1.0mm

COLOURS

Grey

DRYING TIMES • Recoat time: 1–2 hours • Ready to tile: 4–6 hours • Full cure: 3 days

VOC CONTENT

42g/L

PACKAGING CODE

4L (5.3kg) 1972815L (20kg) pails 19727

MODIFIED POLYURETHANE WATERPROOFING MEMBRANE

ARDEX WPM 157ARDEX WPM 155 RAPID

20

ACR

YLI

C, P

OLY

UR

ETH

AN

E A

ND

SB

R M

EMB

RA

NES

ARDEX WPM 179 is a one component liquid applied, latex modified, bituminous elastomeric waterproofing membrane.

• Easily applied: single pack, high build, long pot life • Retains flexibility at low temperatures • Resists ponding water (once fully cured) • Water based – environmentally friendly and

safe to use • Excellent Chemical Resistance properties

TYPICAL APPLICATIONS • Below ground tanking, basements and retaining

walls (not negative hydrostatic situations) • Bridge decks and concrete structures • Planter boxes, terraces/balconies (protected) • Corrosion protection of metal roofs and structures • Waterproof liners for sewage and containment

ponds, dams and tanks • Underground structures/tunnel lining

SUBSTRATES

Masonry, concrete blocks, concrete, steel, sand cement screeds, renders.

COVERAGE • Waterproof Membrane: covers approx. 8m²

(D.F.T. at 1.0mm)

COLOURS

Black

DRYING TIMES

Recoat time: 2–4 hrs; Full cure: 24–48 hrs

VOC CONTENT

<1g/L

PACKAGING CODE

15L pail 12981

SINGLE COMPONENT RUBBER WATERPROOFING MEMBRANE

ARDEX WPM 179

ARDEX WPM 310 is a tough, UV stable flexible premixed liquid applied waterproofing membrane. It has been specifically formulated as a general purpose membrane for exposed wall and roof waterproofing.

• Flexible – accommodates normal building movement

• Provides excellent UV resistance • Decorative – choice of colours • Low VOC – meets Green Building Council of

Australia Green Star IEQ-13 requirements

TYPICAL APPLICATIONS

As a decorative textured finish and waterproofing of external walls and façades. ARDEX WPM 310 is also suitable as a waterproofing membrane over concrete roof and decks.

SUBSTRATES

Brick, masonry, concrete block, concrete screeds, and render.

COVERAGE • Roof membrane application:

7m² D.F.T. – 1.0mm • Wall membrane application:

24m² D.F.T. – 0.3mm

COLOURS

White, Koala Grey and Special Colour

DRYING TIMES • Recoat time: 4 hrs • Dry through: 24 hrs • Full cure: 7 days

VOC CONTENT

100g/L

PACKAGING CODE

15L pail 10217 (White Base)15L pail 10212 (Koala Grey)

EXTERNAL FAÇADE AND ROOF MEMBRANE

ARDEX WPM 310(Shelterguard)

21

ACR

YLI

C, P

OLY

UR

ETH

AN

E A

ND

SB

R M

EMB

RA

NES

ARDEX WPM 812 is a single-component, high viscosity, rollable, liquid polyurethane which cures to form a tough and permanently flexible waterproof membrane. ARDEX WPM 812 SL is a single-component, low viscosity, self-levelling, liquid polyurethane which cures to form a tough and permanently flexible waterproof membrane.

• One part - ready to use - easy application • Tough - with the ability to increase impact and

wear resistance by adding an ARDEX top coat • Labour saving, can be applied in single

application • High permanent flexibility • Excellent adhesion to a wide range of

substrates • Quick access for trades • No bleed through • Non-flammable and low VOC

TYPICAL APPLICATIONS

Waterproofing external balconies, roof and deck areas, podium levels, wet area floors and walls prior to the application of a variety of surface toppings, such as pavers and suitable textured finishes. Planter box interiors, general tanking and below grade waterproofing.

SUBSTRATES

Concrete, screeds.

COVERAGE

Approx. 12m² (1–2 coat) D.F.T. – 1.25mm

COLOURS

WPM 812: Charcoal, WPM 812SL: Grey

DRYING TIMES • Recoat time: 2–4 hrs • Dry through: 24 hrs

PACKAGING CODE

15L (18kg) pail 32380 (Charcoal)15L (18kg) pail Self Levelling 37004 (Grey)

ARDEX WPM 812/ 812SL

SINGLE PART, MOISTURE CURED, POLYURETHANE MEMBRANE

ARDEX WPM 330 is an extremely weather resistant water based acrylic waterproofing membrane. Specially designed as an exposed façade membrane, ARDEX WPM 330 prevents moisture, salt and carbon dioxide entering and damaging the building structure while still allowing the building to breathe.

• Protects buildings against chloride ion, sulfide ion and carbon dioxide attack

• Large range or durable colours • Resists fungi and algae growth • Low VOC – meets Green Building Council of

Australia Green Star IEQ-13 requirements

TYPICAL APPLICATIONS

Building façades and external walls, roof parapets, silos, lighthouses and other external structures.Particularly important in coastal areas, high traffic density areas for application over concrete and brick surfaces.

SUBSTRATES

Rendered walls, brick/masonry walls, fibre cement sheets, tilt up and pre-cast concrete, light weight aerated concrete blocks.

COVERAGE

15L unit: covers approx. 20m² (two coats) D.F.T. at 0.35mm

COLOURS

Special Colour

DRYING TIMES • Recoat time: 2–4 hrs • Full cure: 24 hrs

VOC CONTENT

61g/L

PACKAGING CODE

15L pail 10392 (Special Colour)

EXTERNAL ANTI-CARBONATION FAÇADE MEMBRANE

ARDEX WPM 330(Sheltercoat Façade Membrane)

22

ACR

YLI

C, P

OLY

UR

ETH

AN

E M

EMB

RA

NES

ARDEX WPM 813 is a monolithic system recommended for use in factories, store houses, parking decks, offices and laboratories, etc.

• Good resistance to wheeled traffic • Resistance to acids, alkalis, grease and other

industrial chemicals • Environmentally friendly, no solvent or amine

is used • High build finishes; can be applied in a single

application • Excellent chemical and mechanical properties

TYPICAL APPLICATIONS • Factory floors • Warehouses • Parking decks • Offices and laboratories

SUBSTRATES

Concrete, screeds.

COVERAGE 1.2kg per square metre to obtain an average dry film thickness (DFT) of 1mm. Application thickness will vary according to requirement; for example:Warehouses, offices and laboratories – 2mm DFTParking Deck – 3-5mm DFT.

COLOURS

Grey

DRYING TIMES • Recoat time: 12 hrs • Dry through: 24 hrs • Full cure: 4 days

PACKAGING CODE

36kg kit (18kg Part A & 18kg Part B) 8005141

HIGH HARDNESS, CHEMICAL RESISTANT SEAMLESS FLOOR COATING

ARDEX WPM 813

SINGLE PART, ALIPHATIC POLYURETHANE COATING

ARDEX WPM 821 is a water based liquid solution and represents the ultimate in polyurethane technology. ARDEX WPM 821 combines the excellent durability properties associated with conventional polyurethanes with the ease of application and environmental safety issues associated with water based systems.

• Water- based, easy clean up using water • Exceptional UV resistance • Excellent adhesion to both damp and dry

substrates • Excellent exterior durability • Excellent colour retention • Resistant to mild chemicals, alkaline and

motor oils • One part - ready to use - easy application • Non-flammable • Low VOC

TYPICAL APPLICATIONS • Warehouse and commercial floors • Car parks • Sports finishes ie. timber and cushion based

floors • Floors and walls in food processing areas

SUBSTRATES

Suitable for application over most substrates including concrete, asphalt, timber, brick, etc.

COVERAGE

Approx. 3.5m² – 4m²

COLOURS

Grey

DRYING TIMES • Recoat time: 2–4 hrs • Full cure: 7 days

PACKAGING CODE

15L (18kg) pail 32379

ARDEX WPM 821

23

ACR

YLI

C, P

OLY

UR

ETH

AN

E M

EMB

RA

NES

ARDEX WPM 823 is a tough, fast curing, hybrid polyurethane coating designed as a trafficable, impact resistant finish providing a long life protective barrier for both internal and exposed situations.

• Simple application, easy to use & fast cure • UV resistant & vehicle trafficable • Quick access for trades • Permanently flexible – total adhesion • Once cured has immediate resistance to rain

damage • High chemical resistance • May be line marked with fast dry paints • ARDEX WPM 823 as a topcoat is UV resistant • Provides a durable, chemically resistant finish

TYPICAL APPLICATIONS

ARDEX WPM 823 is typically used as a colour-fast,non-slip surface over ARDEX WPM 813 waterproof membrane on exposed decks, car parks, ramps, loading docks or other areas where heavy vehicular traffic is anticipated.

SUBSTRATES

Concrete, screeds.

COVERAGE

An 18kg kit of WPM 823 will give a 60m2 coverage at a WFT of 0.3 mm and a DFT of 0.15 mm.

COLOURS

Grey, Special Colour

DRYING TIMES

2 hours

VOC CONTENT

70g/L

PACKAGING CODE

Part A: 3.6kg canPart B: 14.4kg can/pail 8005415

ARDEX WPM 823

UV-STABLE, POLYURETHANE TOP COAT FOR VEHICULAR TRAFFIC

ARDEX WPM 822 is a tough, fast curing, aliphatic polyurethane coating designed as a trafficable, impact resistant finish providing a long life protective barrier for both internal and exposed situations. ARDEX WPM 822 as a top coat is UV resistant and provides a durable, chemically resistant finish.

• Simple application, easy to use & fast cure • UV resistant & foot trafficable • Quick access for trades • Permanently flexible – total adhesion • Once cured has immediate resistance to rain

damage • High chemical resistance • May be line marked with fast dry paints • ARDEX WPM 822 as a topcoat is UV resistant • Provides a durable, chemically resistant finish

TYPICAL APPLICATIONS

ARDEX WPM 822 is typically used as a colour-fast,non-slip surface over ARDEX WPM 812 waterproof membrane on exposed decks, plant-room floors, roofs, box gutters, balconies, terraces, etc.

SUBSTRATES

Concrete, screeds.

COVERAGE

An 18kg kit of WPM 822 will give a 60m2 coverage at a WFT of 0.3 mm and a DFT of 0.15 mm.

COLOURS

Special Colour

DRYING TIMES

2 hours

PACKAGING CODE

Part A: 2kg canPart B: 16kg can/pail 8005413

UV-STABLE, ABRASION RESISTANT, POLYURETHANE TOP COAT

ARDEX WPM 822

24

ACRY

LIC

, PO

LYUR

ETH

ANE

MEM

BRAN

ES A

ND

CO

ATIN

GS

ARDEX WPM 908 is a single part acrylic based trafficable membrane. It has specifically been developed for use as a hard wearing trafficable membrane on various substrates.

• Water based – safe to use, low odour and easy cleaning

• Hard wearing – excellent abrasion resistance properties

• Single component – ready to use, no mixing required

• Green Star – meets the benchmark for VOC credit in the Green Building Council of Australia’s Rating Tools

• UV resistant – suitable for exposed applications • Slip resistant – formulated to give anti-slip

properties

TYPICAL APPLICATIONS

Pedestrian traffic podiums, terraces, balconies, roof decks, plant room floors, trafficable box gutters, steps, pathways, patios.

SUBSTRATES

Concrete, screeds, compressed fibre cement sheets wet area grade only.

COVERAGE • 15L: covers approx. 12.5m2 (3 coats)

D.F.T. – 0.60mm • 2.5m2/L per coat

COLOURS

Grey, White

DRYING TIMES • Recoat time: 2–4 hrs • Full cure: 3–5 days

VOC CONTENT

70g/L

PACKAGING CODE

15L (17kg) pail 11082 (Grey)15L (17kg) pail 11084 (White)

WATER BASED ACRYLIC TRAFFICABLE MEMBRANE

ARDEX WPM 908

25

ACR

YLI

C, P

OLY

UR

ETH

AN

E A

ND

SB

R M

EMB

RA

NES

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

• Can be applied to damp surfaces • AS 4020.2005 Potable Water Approved • Hydrostatic pressure resistant

waterproof membrane • Prevents rising damp and formation of

efflorescence • Water based – safe to use in sensitive locations • Low VOC – meets Green Building Council of

Australia Green Star IEQ-13 requirements

TYPICAL APPLICATIONSLow water vapour transmission coating and as a barrier/seal coating over freshly laid or damp concrete. Waterproofing barrier on the negative side in below grade surfaces such as basements, tunnels, liftwells, retaining walls and carparks. Waterproofing membrane or barrier coating over freshly laid hardened concrete, prior to the application of conventional levelling compounds carpet and tile adhesives.

SUBSTRATESBrick, masonry, concrete block, concrete, stone, screeds, and renders.

COVERAGE • Primer or efflorescence barrier:

60m²/20L kit, 12m2/4L kit (1 coat) • Moisture barrier: 30m²/20L kit, 6m2/4L kit

(2 coats)

COLOURS

Grey, Mojo Black

DRYING TIMES • Recoat time: 4 hrs • Full cure: 7 days

VOC CONTENT

26g/L

PACKAGING CODE

4L kits 10207 (Grey), 10447 (Black)20L kits 8000021 (Grey), 8000022 (Black)

WATER BASED EPOXY MEMBRANE

ARDEX WPM 300(HydrEpoxy 300)

SINGLE PART BARRIER MEMBRANE

ARDEX WPM 368 is a single component acrylic copolymer barrier coating that will prevent rising damp, efflorescence and will resist negative hydrostatic pressure when used in accordance with the technical data sheet.

• Can be applied to damp surfaces • Can be safely applied to freshly laid hardened

(green) concrete • When applied directly to the substrate

(dual coat system) the cured membrane will withstand 250kPa of hydrostatic pressure which is equivalent to a 25 metre head of water

• Prevents rising damp and the formation of efflorescence when used as a dual coat system

TYPICAL APPLICATIONS

It has excellent adhesion to most substrates including brick, masonry, concrete block, concrete, stone and is simple to use by brush or roller.

SUBSTRATES

Brick, masonry, concrete block, concrete, screeds, renders, and stone.

COVERAGE • Water Stop: 45m² (1 coat) • Moisture barrier: 22.5m² (2 coats)

COLOURS

Grey

DRYING TIMES • Recoat time: 2–4 hrs • Full cure: 7 days

PACKAGING CODE

20kg pail 19623

ARDEX WPM 368

26

EPO

XY

MEM

BR

AN

ES, S

EALE

RS

AN

D A

DH

ESIV

ES

ARDEX WPM 270(Sheltercoat Solvent Based Primer)

ARDEX WPM 265(Sheltercoat Water Based Primer)

GENERAL PURPOSE WATER BASED PRIMER

GENERAL PURPOSE SOLVENT BASED PRIMER

ARDEX WPM 270 is a clear solvent-based primer designed to seal and improve the adhesion of dense or highly porous substrates.

• Highly penetrating – ideal for porous substrates

• Heavy duty primer – suitable for dense concrete (>30MPa)

• Rapid drying • Low viscosity binder that seals absorbent

substrates and consolidates dust

LOCATION

External

SUBSTRATES

Fibre-cement sheets (wet area grade), marine plywood, concrete, renders and screeds, masonry/concrete blocks.

COVERAGE

6m²/L – may vary depending on surface porosity

COLOURS

Clear

DRYING TIMES

Recoat time: 30 mins

PACKAGING CODE

20L metal pail 10204

ARDEX WPM 265 is a red water-based acrylic primer designed to seal porous substrates and enhance the adhesion of subsequent ARDEX undertile membranes.

• Water-based • Suitable for most substrates • Coloured – primed surfaces are

easily identified • Low VOC – meets Green Building Council of

Australia Green Star IEQ-13 requirements

LOCATION

Internal/External

SUBSTRATES

New and old concrete, fibre cement, compressed fibreboards.

COVERAGE

6m²/L – may vary depending on surface porosity

COLOURS

Red

DRYING TIMES

Recoat time: 1 hr

VOC CONTENT

11g/L

PACKAGING CODE

20L pail 10601

27

PRIM

ERS

AN

D R

EIN

FOR

CEM

ENT

MAT

ERIA

LS

ARDEX WPM 405(Sheltercrete Additive)

ARDEX WPM 801

HIGH PERFORMANCE POLYMER ADDITIVE

FAST-DRYING, HIGH-PERFORMANCE PRIMER FOR POLYURETHANE

ARDEX WPM 405 is an SBR, multi-purpose, concentrated liquid polymer additive which when used with sand/cement greatly improves the bond strength and flexibility.

• Water resistant – can be used as a temporary waterproofing sealer externally

• High strength – can be used as an admix for render/screeds

• Water based – safe to use and low odour • Low VOC – meets Green Building Council of

Australia Green Star IEQ-13 requirements

TYPICAL APPLICATIONS

Temporary waterproofing sealer in high exposure areas such as rooftops. Slurry coat prior to applying renders or screeds.

Admix for sand/cement mixes especially in repair mortars, fillets, covings renders and screeds.

SUBSTRATES

Renders, screeds, masonry.

COVERAGE • Temp waterproofing: 12m² (2 coats) at 1mm • Slurry coat: 3m2/L • Render: 2m²/L

COLOURS

White liquid

DRYING TIMES

16 hrs (for temp waterproofing/screeds)

VOC CONTENT

32g/L

PACKAGING CODE

20L pail 10611

ARDEX WPM 801 is a fast drying, single-component, polyurea-modified, resin-based primer that penetrates and seals concrete, masonry, plywood and many other surfaces. ARDEX WPM 801 imparts a surface finish that is particularly receptive to urethane-based sealants and other high performance coatings such as ARDEX WPM 812 and ARDEX WPM 813.

• Does not contain TDI, MOCA, bitumen or tar- based compounds

• Excellent adhesion to a wide range of surfaces • Suitable as a primer for sealants and coatings

subjected to immersion in water • Water resistant, protects the substrate in the

event of interruption by wet weather • Minimises outgassing effects of porous

substrates

TYPICAL APPLICATIONS

To prepare surfaces for the adhesion of urethane based sealants and other high performance coatings. To promote inter-coat adhesion between new and existing coatings.

SUBSTRATES

Concrete, screeds.

COVERAGE

6-10m²/L per coat

COLOURS

Light yellowish liquid

DRYING TIMES • 3 - 4 hrs @ 10 - 15°C • 1 - 2 hrs @ 15 - 25°C • 0.5 - 1 hr @ 25°C

PACKAGING CODE

15L (18kg) pail 37005

28

PRIM

ERS

AN

D R

EIN

FOR

CEM

ENT

MAT

ERIA

LS

ARDEX WR PRIME ARDEX P9

ARDEX WR Prime is a performance enhancing primer and additive for renders and other cement based construction products.

• Enhances bond strength, increases flexibility and working time of cement based construction products

• Improves surface strength and adhesion of cement based render

• Ideal as a primer and additive for most cement based construction products

LOCATION

Internal/External

SUBSTRATES

Masonry (Brick & Blockwork), Concrete walls, Autoclaved Aerated Concrete Blocks and Panels, Existing Render, Blueboard, Fibre-cement Sheet.

COVERAGE

One litre of ARDEX WR Prime is sufficient for approximately 6m2.

COLOURS

White liquid

DRYING TIMES

When used as a primer, allow to dry to a clear, thin film prior to application of subsequent products.

PACKAGING CODE

15L cube 23642

ARDEX P 9 Single Part Primer is a water-based primer used for improving the adhesion of ARDEX products to smooth, dense and various non-porous substrates. ARDEX P 9 Single Part Primer is suitable for internal and external wall or floor applications.

LOCATION

Internal/External

SUBSTRATES • Particleboard*, plywood*, sheet timber* • Medium density fibre-cement sheet,

compressed fibre-cement sheet • Jointing compound over plasterboard • Concrete, renders, screeds, masonry and

lightweight concrete blocks • Autoclaved aerated concrete (AAC) • Existing glazed tiles (not suitable for shower

floors or permanently immersed conditions) • Metal surfaces (contact ARDEX on

specific types) • Some plastics (contact ARDEX on

specific types) • Epoxy coatings (contact ARDEX

on specific coating) • Painted surfaces (contact ARDEX on

specific types) • Contact ARDEX if other substrates

are encountered*Not recommended for external applications.

COVERAGE

One litre of ARDEX WR Prime is sufficient for approximately 6m2.

COLOURS

White liquid

DRYING TIMES

When used as a primer, allow to dry to a clear, thin film prior to application of subsequent products.

PACKAGING CODE

1L pail 167914L pail 16778

PERFORMANCE ENHANCING POLYMER PRIMER & ADDITIVE

SINGLE PART PRIMER

29

PRIM

ERS

AN

D R

EIN

FOR

CEM

ENT

MAT

ERIA

LS

WOVEN REINFORCEMENT CLOTH

ARDEX DECKWEB

Polyester cloth used in critical areas like, cracks, movement joints, corner/coving areas and also wall floor junctions in conjunction with under tile membranes. ARDEX Deckweb’s principal function is to control correct membrane thickness in critical areas mentioned above.

PACKAGING CODE

6 x 190mm x 50m roll 102921 x 190mm x 50m roll 102931 x 190mm x 10m roll 102901 x 100mm x 50m roll 37196

30

PRIM

ERS

AN

D R

EIN

FOR

CEM

ENT

MAT

ERIA

LS

ARDEX SHEET MEMBRANESENVIRONMENTALLY FRIENDLY AND

ENERGY EFFICIENT ROOFING MEMBRANES

ROOFING SYSTEMS

A synthetic rubber membrane with properties which resist ageing from heat, sunlight and ozone. It has excellent gas impermeability and toughness and remains flexible at low temperatures.ARDEX Butynol® protects against water, moisture vapour, gases, sun, ozone, frost, acids, chemicals and bacteria.

• Single-ply, flexible synthetic rubber membrane • Superior weatherability • Potable water AS4020 certificate approved • No maintenance required • Meets requirements of AS4654 – Waterproofing

membranes for external above-ground use

TYPICAL USES

Typical applications are roof membranes, external balconies and decks (protected) gutter linings, water containment (i.e. pillow tanks, reservoirs, pond liners), below grade applications.

TYPE

Butyl rubber

THICKNESS/WEIGHT • 1.0mm (1.2kg/m²) • 1.5mm (1.8kg/m²)

TOP SURFACE

Butyl rubber

BOTTOM SURFACE

Butyl rubber

ELONGATION

300%

ROLL SIZE

17.86m rolls (1.4m width)

ROLL WEIGHT CODE

1.0mm (30kg) Black 132671.5mm (45kg) Black 13272 1.5mm (45kg) Grey 13282

ARDEX BUTYNOL®

ROOFING AND TANKING MEMBRANE

ARDEX WPM 612 FL

ARDEX WPM 612 FL Fleece-Backed TPO is a high performance, flexible Thermoplastic PolyOlefin roofing membrane made from the incorporation of a ethylene propylene rubber into a polypropylene matrix and produced with a polyester weft inserted reinforcement with polyester fleece backing. Fast to install and safe to use, it is also environmentally friendly. The benefits from ARDEX TPO membranes range from heat reflectivity and energy efficiency to green roofing systems.ARDEX TPO's lightweight, flexible, scrim-reinforced membrane is engineered to provide dependable performance in most commercial roofing applications

TYPICAL USES

Roofing membrane for concrete roofs, green roofs and metal roofs.

TYPE

Thermoplastic polyolefin

REINFORCEMENT

Polyester

THICKNESS/WEIGHT

1.14mm (1.30kg/m²)

TOP SURFACE/BOTTOM SURFACE

TPO/Polyester Fleece

TEAR RESISTANCE

≥400/400 N

ROLL SIZE

30.5m x 3.05m x 1.14mm roll

ROLL WEIGHT CODE

121kg 24953

TPO FLEECE-BACKED ROOFING MEMBRANE

32

BU

TYN

OL®

AN

D T

PO

ARDEX WPM 612 FL

ARDEX WPM 612

ENVIRONMENTALLY FRIENDLY TPO ROOFING MEMBRANE

ARDEX WPM 612 TPO is a flexible, high performance Thermoplastic PolyOlefin roofing membrane that is environmentally friendly, fast to install and safe to use. It is made from the incorporation of a ethylene propylene rubber into a polypropylene matrix and produced with a polyester weft inserted reinforcement. The benefits from ARDEX TPO membranes range from heat reflectivity and energy efficiency to green roofing systems.ARDEX TPO's lightweight, flexible, scrim-reinforced membrane is engineered to provide dependable performance in most commercial roofing applications

TYPICAL USES

Roofing membrane for concrete roofs, green roofs and metal roofs.

TYPE

Thermoplastic polyolefin

REINFORCEMENT

Polyester

THICKNESS/WEIGHT

1.14mm (1.14kg/m²)

TOP SURFACE/BOTTOM SURFACE

TPO

TEAR RESISTANCE

≥400/400 N

ROLL SIZE

30.5m x 1.52m x 1.14mm roll

ROLL WEIGHT CODE

53kg 24952

ENVIRONMENTALLY FRIENDLY TPO ROOFING MEMBRANE

ARDEX WPM 615 is a proprietary Thermoplastic PolyOlefin combining polypropylene and ethylene propylene rubber. ARDEX TPO membranes are lightweight, flexible, scrim reinforced to provide dependable performance in most commercial roofing applications.

• Ease of Installation – 2m widths providing fast economical coverage

• Safe Installation – hot air welding eliminates the need for naked flames on site

• Superior weatherability and durability – contains no plasticisers and no halogen flame retardants resulting in outstanding UV resistance

• Outstanding reflectivity – light coloured surfaces reflects sunlight improving the energy efficiency of the building

TYPICAL USES

Roofing membrane for concrete roofs, green roofs and metal roofs.

TYPE

Thermoplastic polyolefin

REINFORCEMENT

Polyester

THICKNESS/WEIGHT

1.5mm (1.54kg/m²)

TOP SURFACE/BOTTOM SURFACE

TPO

TEAR RESISTANCE

≥400/400 N

ROLL SIZE

30.5m x 2.0m x 1.5mm roll

ROLL WEIGHT CODE

94kg White 11042

ARDEX WPM 615

33

BU

TYN

OL®

AN

D T

PO

12.7MM HIGH DENSITY POLYISO COVER BOARD

CLOSED-CELL PIR FOAM INSULATION BOARD

ARDEX POLYISO ROOFING INSULATION

ARDEX POLYISO flat board roofing insulation consists of a closed-cell polyiso foam core laminated to black glass reinforced mat facer on both surfaces. ARDEX POLYISO insulation provides outstanding thermal performance on commercial roofing applications.

LOCATION

External roofing applications (covered).

SUBSTRATES

Suitable for steel, concrete and wood deck substrates.

TYPICAL USES

Used for insulation before application of ARDEX WPM 615, WPM 612 and WPM 612 FL TPO membrane.

THICKNESS

38.1mm, 50.8mm and 58.4mm (please contact ARDEX for availability of other thicknesses).

TYPE

Polyisocyanurate foam core

COLOURS

Dark grey

DIMENSIONS CODE

1.22m x 2.25m 22911 (50.80mm)Other thicknesses available on request; lead times apply.

ARDEX HD Cover Board is a 12.7mm thick Polyiso board designed for use as a cover board in conjunction with ARDEX WPM 615, WPM 612 and WPM 612 FL TPO membranes. It is a high-density, closed-cell, Polyiso foam core that has been manufactured with a coated fibreglass facer.

• Easy to cut and handle – reducing installation time and labour costs

• Lightweight – each board weighs only 5kg in total

• Thermal Properties – highest thermal performance of any 12mm cover board

• Added Protection – compressive strength of more than 700kPa adding structural strength to the entire roofing system

TYPICAL USES

Used as a cover board over mineral wool and EPS insulation. Ideal as a backer board against upstands. Suitable over existing bitumen sheet membranes. Can be applied directly onto steel support (as long as flute span is less than 70mm) recover over metal deck.

DIMENSIONS CODE

1.22m x 2.25m 12926 (12.7mm)

ARDEX HD COVER BOARD

34

CO

VER

BO

AR

DS

AN

D IN

SULA

TIO

N

ARDEX WPM 116 is an A.P.P. type modified bitumen membrane slip or base sheet.ARDEX WPM 116 is reinforced with a non-woven polyester.

• Excellent elongation • Cold flexibility –5˚C • Good mechanical characteristics • Good puncture resistance

TYPICAL USES

Used as a base layer to allow dispersion of vapour in exposed bitumen sheet waterproofing systems.

TYPE

APP

REINFORCEMENT

Polyester (50g/m²)

THICKNESS/WEIGHT

2.7mm

TOP SURFACE

Torch film

BOTTOM SURFACE

Polyester surface

HEAT STABILITY

110˚C

COLD FLEXIBILITY

–5˚C

ROLL SIZE

10m x 1.05m x 2.7mm

ROLL WEIGHT

30kg

ROLLS PER PALLET CODE

28 10524

2.7MM APP BITUMEN FIBRE BACKED BASE SHEET

ARDEX WPM 116(Shelterbit Fibre Back Base Sheet)

ARDEX WPM 114 is an APP (Atactic Polypropylene) Plastomeric type modified bitumen membrane vented base sheet, consisting of a specially formulated bituminous compound of distilled asphalt modified with selected high-grade viscoelastic polymers. ARDEX WPM 114 is used as part of a multi-layer waterproofing system where there may be potential moisture issues in the substrate.

TYPICAL USES

ARDEX WPM 114 is used as part of a multi-layer system in roofing applications for waterproofing. It has been designed to be used in situations where there may be potential moisture issues in the substrate and can only be used as the base sheet of a multi-layer roofing system.

TYPE

APP with SBS Strips

REINFORCEMENT

Polyester/Glass (180g/m²)

THICKNESS/WEIGHT

4.0mm

TOP SURFACE

Sanded polymer

BOTTOM SURFACE

Thermo-Adhesive strips

HEAT STABILITY

100°C

COLD FLEXIBILITY

–10°C

ROLL SIZE

8m x 1.0m x 4mm

ROLL WEIGHT

45kg

ROLLS PER PALLET CODE

20 25223

ARDEX WPM 114(Shelterbit Vented Base Sheet)

4.0 MM APP VENTED BASE SHEET

TOR

CH

-APP

LIED

AN

D S

ELF-

AD

HES

IVE

MEM

BR

AN

ES

35

ARDEX WPM 117 (Shelterstick Self-adhesive Membrane) is a self-adhesive bituminous membrane.

• Cold applied and installed without the use of naked flames, offering a higher safety level on the job

• Highly resistant to acids, alkalis or other pollutants

• Membrane self seals on contact if being installed using nails or other fasteners

TYPICAL USES

Ideal for general waterproofing, foundations, tunnels, etc. and especially when, due to the type of operation or materials, the use of torch/fire must be avoided.

TYPE

SBS

REINFORCEMENT

Fibreglass

THICKNESS/WEIGHT

2mm

TOP SURFACE

Torch Film

BOTTOM SURFACE

Self-Adhesive

ROLL WEIGHT

34kg

ROLL SIZE

1m x 15m x 2mm

ROLLS PER PALLET CODE

25 24560

2MM SBS FIBREGLASS REINFORCED BITUMINOUS MEMBRANE

ARDEX WPM 117 (Shelterstick Self-Adhesive Membrane)

ARDEX WPM 150 (Shelterbit 3/160) is an A.P.P. type modified bitumen membrane.

• A.P.P. modified compound • Excellent cold flexibility to –5˚C • Heat welded laps provide homogeneous joint • Combined reinforcement carrier • High mechanical characteristics • High puncture resistance

TYPICAL USES

ARDEX WPM 150 is used as a single layer or multi-layer tanking membrane in horizontal or vertical applications, also for waterproofing balconies, terraces and roofs. ARDEX WPM 150 membrane is a sandwich membrane and must be protected from UV radiation.

TYPE

APP

REINFORCEMENT

Fibreglass and polyester (150g/m²)

THICKNESS/WEIGHT

3.0mm

TOP SURFACE

Sand

BOTTOM SURFACE

Torch film

HEAT STABILITY

110˚C

COLD FLEXIBILITY

–5˚C

ROLL SIZE

10m x 1.0m x 3.0mm

ROLL WEIGHT

35kg

ROLLS PER PALLET CODE

28 10527

3.0MM COMBINED REINFORCED APP BITUMEN MEMBRANE

ARDEX WPM 150(Shelterbit 3/160 Membrane)

TOR

CH

-APP

LIED

AN

D S

ELF-

AD

HES

IVE

MEM

BR

AN

ES

36

ARDEX WPM 188 is an SBS type modified bitumen membrane. ARDEX WPM 188 is treated with a preventative chemical to stop roots from plants penetrating the membrane.

• Positive vapour barrier • Excellent resistance to pollutants and aging • High flexibility during application at sub-zero

temperature with no physical strain • Maintains shape stability at high temperatures • High resistance to perforation • Resists root growth ingress into both the

membrane and the laps

TYPICAL USES

Planter boxes, garden beds, roof gardens, flower beds and green civil works. Tanking membrane in horizontal and vertical applications.

TYPE

SBS

REINFORCEMENT

Combine polyester/glass

THICKNESS/WEIGHT

3mm

HEAT STABILITY

90°C

COLD FLEXIBILITY

–20°C

ROLL SIZE

10m x 1m x 3mm

ROLL WEIGHT

38kg

ROLLS PER PALLET CODE

28 16634

3.0MM SBS BITUMEN MEMBRANE

ARDEX WPM 188 (Shelterbit Garden Tanking Membrane)

ARDEX WPM 185 is an A.P.P. type modified bitumen membrane.

• Positive vapour barrier • Excellent resistance to atmospheric agents • Cold flexibility –5˚C • Resistant to chemical attacks • Withstand thermal shocks • High puncture resistance

TYPICAL USES

ARDEX WPM 185 is used as a cap layer in exposed membrane systems (allowing light foot traffic for maintenance). ARDEX WPM 185 is available in slate grey (mineral chip finish).

TYPE

APP

REINFORCEMENT

Fibreglass and polyester (180g/m²)

THICKNESS/WEIGHT

4.5kg/m²

TOP SURFACE

Slate Chip

BOTTOM SURFACE

Torch film

HEAT STABILITY

110˚C

COLD FLEXIBILITY

–5˚C

ROLL SIZE

10m x 1.0m x 4.0mm

ROLL WEIGHT

36kg (8m)

ROLLS PER PALLET CODE

25 16639

4.5KG/M² MINERAL COATED APP BITUMEN MEMBRANE

ARDEX WPM 185(Shelterbit Mineral Membrane)

TOR

CH

-APP

LIED

AN

D S

ELF-

AD

HES

IVE

MEM

BR

AN

ES

37

ARDEX WPM 444 (Shelterbit Phoenix Star) is an APP (Atactic Polypropylene) plastomeric type modified bitumen membrane, consisting of a specially formulated bituminous compound of distilled asphalt modified with selected high grade visco-elastic polymers and reinforced with a combined reinforcement (polyester and fibreglass).

TYPICAL USES

ARDEX WPM 444 (Shelterbit Phoenix Star) is designed for use as a multi-layer system on concrete or plywood substrates, or as a single layer system on concrete substrates with a protective topping such as paving slabs or concrete.

TYPE

APP

REINFORCEMENT

Fibreglass and polyester

THICKNESS/WEIGHT

4.0mm

TOP SURFACE

Sanded or talc

BOTTOM SURFACE

Polythene film

HEAT STABILITY

130°C

COLD FLEXIBILITY

–15°C

ROLL SIZE

10m x 1m x 4mm

ROLL WEIGHT

40kg

ROLLS PER PALLET CODE

23 19413

ARDEX WPM 444(Shelterbit Phoenix Star – Plain)

4.0MM REINFORCED APP BITUMEN MEMBRANE

ARDEX WPM 3000X is a peel and stick SBS rubber modified bituminous/asphalt membrane. ARDEX WPM 3000X can be adjusted should it initially be placed in the wrong position.

• Cold application – no open flames • Ideal for restricted spaces • Chemical resistance • Highly resistant to acids, alkalis and

other pollutants • Flexibility and adaptability • Self sealing – the membrane self seals

on contact maintaining its watertightness

TYPICAL USES

Planter boxes, foundations, below-ground applications, retaining walls, balconies, decks under cement screeds or other compatible hard coverings.

TYPE

SBS

THICKNESS/WEIGHT

1.5mm

HEAT STABILITY

90˚C

COLD FLEXIBILITY

–30˚C

ROLL SIZE

20m x 1m x 1.5mm

ROLL WEIGHT

30kg

ROLLS PER PALLET CODE

25 10543

1.5MM SBS SELF-ADHESIVE SHEET MEMBRANE

ARDEX WPM 3000X(Shelterseal 3000X Membrane)

TOR

CH

-APP

LIED

AN

D S

ELF-

AD

HES

IVE

MEM

BR

AN

ES

38

WELDABLE WATERPROOFING MEMBRANES

WELDABLE SOLUTIONS FROMROOFTOPS TO BASEMENTS

VERSATILE RUBBER WATERPROOFING MEMBRANE

RUBBER MEMBRANE WATERPROOFING SYSTEM

ARDEX WPM 1000 Weldable Waterproofing Membrane is a versatile rubber membrane that can be heat welded, that is used in tiled areas such as balconies, decks, roof tops and podiums.

• Sheet membrane for waterproofing tiled areas • Tiling can begin 60 minutes after

membrane installation • Thin & consistent waterproofing gauge • Heat weld corners and laps • Available with a unique clamp waste outlet • Meets requirements of AS4654 – Waterproofing

membranes for external above-ground use

TYPICAL USES

It is suitable for waterproofing underground tanking, rooftops, decks, undertile, canal and pond linings.

TYPE

Synthetic rubber

THICKNESS/WEIGHT

1.2mm

TOP SURFACE

Polypropylene

BOTTOM SURFACE

Polypropylene

ROLL SIZE

20m x 1.4m x 1.2mm

ROLL WEIGHT CODE

Approx. 38kg 16475

ARDEX WPM 750 is an undertile waterproofing sheet membrane system that is used in tiled areas such as showers and bathrooms.The system provides a more secure system with consistent gauge thickness and heat welded laps that can be tank tested intermediately and tiled to directly.

• Sheet membrane for waterproofing tiled areas • Tiling can begin 60 minutes after

membrane installation • Thin & consistent waterproofing gauge • Heat weld corners and laps • Available with a unique clamp waste outlet • Meets requirements of AS4654 – Waterproofing

membranes for external above-ground use

TYPICAL USES

It is used for waterproofing tiled areas such as showers and bathrooms.

TYPE

Synthetic rubber

THICKNESS/WEIGHT

0.75mm

TOP SURFACE

Polypropylene

BOTTOM SURFACE

Polypropylene

ROLL SIZE

20m x 1.4m x 0.75mm

ROLL WEIGHT CODE

Approx. 16.32kg 13319

ARDEX WPM 1000ARDEX WPM 750

40

WEL

DTE

C W

ELD

AB

LE M

EMB

RA

NES

BELOW GROUND TANKING MEMBRANE

ARDEX WPM 1500 is a fleece-lined, weldable tanking membrane for below ground applications. It is generally applied prior to concrete being cast against it. ARDEX WPM 1500 is fully bonded which allows resistance against lateral water migration.

• Accommodates structural movements • Resistant to chemical attacks • Withstands thermal shocks • High elongation with excellent crack

bridging capabilities • Forms a unique continuous waterproofing

membrane • Not reliant on confining pressures, hydration

or tape seams • Welded detailing creates very strong

watertight laps • Resists tearing, flex cracking, bubbling

and abrasions • Versatile vapour barrier • Meets requirements of AS4654 – Waterproofing

membranes for external above-ground use

TYPICAL USES

It is used as a single layer or multilayer membrane in horizontal or vertical applications for waterproofing for below ground tanking.

TYPE

Fleece-lined, weldable tanking membrane.

THICKNESS/WEIGHT

1.5mm

ROLL SIZE

20m x 1.4m x 1.5mm

ROLL WEIGHT CODE

Approx. 53kgs 19807

ARDEX WPM 1500

ARDEX ROOT REPELL™ Weldable Waterproofing Membrane is a high performance, single-ply, butyl-based membrane that can be heat welded. Specially formulated ARDEX ROOT REPELL™ contains a premium root inhibitor that repels root growth without killing the root. It is designed primarily for areas covered with or exposed to soil and plants. Once installed ARDEX ROOT REPELL™ will remain a permanently flexible waterproof lining and bonds to most building surfaces. ARDEX ROOT REPELL™ also has excellent gas impermeability and toughness and will remain flexible at low temperatures.

• Meets requirements of AS4654 – Waterproofing membranes for external above-ground use

TYPICAL USES

Suitable for waterproofing planter boxes, living roofs and as a damp proofing membrane.

TYPE

Butyl

THICKNESS/WEIGHT

1.0mm

ROLL SIZE

20m x 1.4m x 1.2mm

ROLL WEIGHT CODE

Approx. 38kg 24578

ARDEX ROOT REPELL™

WELDABLE WATERPROOFING MEMBRANE

(WPM1000 RR)

41

WEL

DTE

C W

ELD

AB

LE M

EMB

RA

NES

ROOFING MEMBRANEWELDABLE ROOFING MEMBRANE

ARDEX WPM 717 and ARDEX WPM 720 are weldable, fleece-backed waterproofing membranes with properties that resist ageing from heat, sunlight and ozone. They have excellent gas impermeability, toughness and remain flexible at low temperatures and are suitable in all climatic zones.

• Welded laps and seams for fast installation

• Suitable for use over imperfect substrates

• Suitable for use over substrates with residual moisture

• Excellent resistance to ageing from heat, sunlight and ozone

• Excellent resistance to atmospheric agents

• Excellent resistance to geothermal gas including hydrogen sulphide and methane

• Welded detailing creates very strong watertight laps

• Excellent flexibility at lower temperatures

TYPICAL USES

Ideal for use as a single layer membrane in horizontal or vertical applications for waterproofing decks and roofs that have residual moisture or are not perfectly flat and smooth. It is suitable for waterproofing underground tanking, rooftops, decks, undertile, canal and pond linings.

SUBSTRATES

Concrete, Plywood, Modified Bitumen Membranes,Insulation Board, Orientated Strandboard, CFCSheet, Timber, Galvanised Metal, Zincalume,Polyurethane Foams. For further substrate types please consult ARDEX Technical Department.

ROLL SIZE

WPM 717: 20m x 1.4m x 1.7mmWPM 720: 20m x 1.4m x 2.0mm

ROLL WEIGHT CODE

WPM 717: Approx. 47kg 32347WPM 720: Approx. 47kg 32349

ARDEX WPM 712 and ARDEX WPM 715 are high quality, heat-welded waterproofing membranes designed for use in exposed areas. Each membrane shows excellent resistance to atmospheric agents, and are resistant to ageing from heat, ozone, and sunlight.

• Welded laps and seams for fast installation • Excellent resistance to ageing from heat,

sunlight and ozone • Excellent resistance to atmospheric agents • Excellent resistance to geothermal gas

including hydrogen sulphide and methane • Welded detailing creates very strong

watertight laps • Excellent flexibility at lower temperatures • Suitable for potable water collection

TYPICAL USES

Ideal for use as single layer membranes in horizontal or vertical applications for waterproofing decks and roofs.

SUBSTRATES

Concrete, Plywood, Modified Bitumen Membranes,Insulation Board, Orientated Strandboard, CFCSheet, Timber, Galvanised Metal, Zincalume,Polyurethane Foams.For further substrate types please consult ARDEXTechnical Department.

ROLL SIZE

WPM 712: 20m x 1.4m x 1.2mmWPM 715: 20m x 1.4m x 1.5mm

ROLL WEIGHT CODE

WPM 712: Approx. 42kg 32339WPM 715: Approx. 42kg 32341

ARDEX WPM 712 | WPM 715 ARDEX WPM 717 | WPM 720

4242

WEL

DTE

C W

ELD

AB

LE M

EMB

RA

NES

Thanks to its particular chemical composition, ARDEX Hydrostop SW WPM 1950 hydrophilic rubber joint remains unaltered over time even at maximum expansion, is dimensionally stable even after numerous hydration and de-hydration cycles while maintaining its ability to increase its volume.In its maximum expansion, in all its sections, ARDEX Hydrostop SW WPM 1950 hydrophilic rubber joint is mechanically strong and elastic. The swelling process is controlled and designed to be compatible with fresh concrete.

BENEFITS

ARDEX Hydrostop SW WPM 1950 hydrophilic rubber joint is non-greasy, non-sticky, odourless and non-toxic. Thanks to its ductility it can be used in all conditions and, apart from the nails or adhesive, needs no additional support also in the vertical laying.

PACKAGING CODE

20mm x 10mm x 8m rolls 30127

ARDEX HYDROSTOP SW WPM 1950

POLYMERIC HYDROPHILIC RUBBER JOINTS

ARDEX Hydrostop SEA WPM 1955 is specifically designed to be used in applications in brackish and marine waters.Thanks to its particular chemical composition, ARDEX Hydrostop SEA WPM 1955 hydrophilic rubber joint remains unaltered over time even at maximum expansion, is dimensionally stable even after numerous hydration and dehydration cycles while maintaining its ability to increase its volume.In its maximum expansion, in all its sections, ARDEX Hydrostop SEA WPM 1955 hydrophilic rubber joint is mechanically strong and elastic. The swelling process is controlled and designed to be compatible with fresh concrete.

BENEFITS

ARDEX Hydrostop SEA WPM 1955 hydrophilic rubber joint is non-greasy, non-sticky, odorless and non-toxic. Thanks to its ductility it can be used in all conditions and, apart from the nails or adhesive, needs no additional support also in the vertical laying.

PACKAGING CODE

20mm x 10mm x 8m rolls 30146

POLYMERIC HYDROPHILIC RUBBER JOINTS

ARDEX HYDROSTOP SEA WPM 1955

43

HY

DR

OPH

ILIC

RU

BB

ER J

OIN

TS

ARDEX DRS 30/50 DC provides a uniform surface as well as an internal void space for effective draining of excess water. The drainage cells shallow and effective drainage profile helps landscapers to make use of mature plants on roof garden which needs soil depth and water retention properties by allowing for maximum soil depth which improves the growing environment.Due to its unique design and void properties, the drainage cell system helps heat to escape, enhancing building life by reducing the risk of cracking. Environmentally friendly and easy to install, the drainage cell material can withstand high compressive loadings while maintaining its drainage.

TYPICAL USES

Green Roof applications, Sports field drainage systems, Drainage for retaining walls, Landscaping drainage systems, Tunnel Drainage systems, Gas collection systems.

TYPE

ARDEX DRS 30/50 DC is made from recycled Polypropylene and is inert to soil borne chemicals and bacteria.

THICKNESS/WEIGHT

30mm (ARDEX DRS 30 DC)50mm (ARDEX DRS 50 DC)

DIMENSIONS CODE

30mm x 1.0m x 1.2m 2516950mm x 1.0m x 1.2m 25170

ARDEX DRS 30/50 DC

DRAINAGE CELL

ARDEX DRS 10/18 GC is a dimpled plastic sheet that provides effective drainage and waterproof membrane protection on foundation walls and other underground structures. The integrated non-woven geotextile covering the dimples prevents soil particles blocking the drainage sheet, creates an air gap for reliable ventilation and allows inflow. Its dimple structure effectively captures and transports high water volumes and resists high loads from earth and formwork.

TYPICAL USES

Planter boxes, foundations, below-ground applications, retaining walls.

TYPE

Needle-punched, non-woven, polypropylene geotextile fabric pressed into matting.

THICKNESS/WEIGHT

10mm (Single Cuspated ARDEX DRS 10 GC)20mm (Double Cuspated ARDEX DRS 18 GC)

ROLL WEIGHT

12.5m x 1.22m (ARDEX DRS 10 GC)25m x 1.10m (ARDEX DRS 18 GC)

DIMENSIONS CODE

10mm – 1.22m x 12.5m 2517110mm – 2.44m x 12.5m 2517218mm – 1.1m x 30m 25173

ARDEX DRS 10/18 GC

PREFABRICATED DRAINAGE COMPOSITE

44

DR

AIN

AGE

SYST

EMS

AN

D G

EOTE

XTI

LE F

AB

RIC

ARDEX DRS 1 GT is a UV-stabilised, needle-punched, non-woven, polypropylene geotextile designed to allow water to filter through easily while restricting soil particles.

TYPICAL USES

Soil backfill is retained by the geotextile fabric while allowing water to pass into a drainage core providing hydrostatic relief. Collected water is then conveyed to a proper collection system.

TYPE

Needle-punched, non-woven, polypropylene geotextile fabric pressed into matting.

THICKNESS/WEIGHT

1.2mm

ROLL WEIGHT

7kg (1 x 50m)14kg (2 x 50m)

ROLL SIZE CODE

1 x 50m 251742 x 50m 25175

ARDEX DRS 1 GT

GEOTEXTILE FABRIC

45

DR

AIN

AGE

SYST

EMS

AN

D G

EOTE

XTI

LE F

AB

RIC

ACCESSORIES

ARDEX BUTYNOL® VAPOUR VENT

CODE: 10571

ARDEX FLASHING TAPE

Underflashing for Butynol® in corners, pipes and penetrations.

CODE: 10397 (4.7m x 100mm)

ARDEX BUTYNOL® DECK DRAIN

CODE: 19461 (100mm round)

ARDEX WA 98 SOLVENT

Designed for general purpose clean-up and preparation procedures prior to the installation of ARDEX Butynol® membranes.

CODE: 13050

ARDEX SEAM TAPE

Uncured Butyl cold gum tape for use in conjunction with ARDEX Seam Primer for bonding Butynol® lap joints.

CODE: 10539 (30.4m x 50mm)

ARDEX BUTYNOL® HOT TAPE

Used for welding large panels of Butynol® membrane together.

CODE: 10431 (28m x 25mm)

ARDEX UNCURED FLASHING TAPE

Designed for patching and detailing Butynol around pipes and penetrations.

CODE: 10584 (30.4m x 150mm)

ARDEX WA 98 ADHESIVE

Specially formulated adhesive for all Butynol® applications including broadspan bonding and lap jointing in non-aggressive or non-immersed condition exposure.

CODE: 13052

ARDEX WPM 299 SEAM PRIMER

A water resistant primer adhesive, used with seam tape for general lap bonding.

CODE: 10205

ARDEX CA 20P

Designed for sealing Butynol® flashings into chases. Available in Black and White.

CODE: 10068 (White)12923 (Black)

10430 (28m x 38mm)

19420 (100mm square)

46

BU

TYN

OL®

AC

CES

SOR

IES

TPO ACCESSORIES BITUMEN ACCESSORIES

ARDEX WPM 240

Solvent based primer used for ARDEX bituminous membranes.

CODE: 10534

ARDEX BITUMINOUS ROOF SEALANT

One component, easy-to-use, UV-stable sealant with bitumen-based solvents.

CODE: 25432

ARDEX DROPPER

CODE: 10566 (180 x 90mm)

ARDEX SCUPPER

CODE: 10570 (100 x 65mm)

ARDEX PAVER SUPPORT PADS

CODE: 10512

NB: Other bitumen accessories include fixing washers, pressure seal, protection board.

ARDEX WPM 649

Solvent based adhesive for ARDEX WPM 615 TPO membrane (W56-TPO-3005).

CODE: 22082

ARDEX WPM 623

Non-reinforced flashing tape for use where pre-moulded accessory products are not appropriate.

CODE: 24950 (Grey)

NB: Other ARDEX TPO accessories include cut edge sealant, pourable sealer, eco walkway pads, seam plates and fasteners.

INSIDE OUT MOULDED CORNERS

Designed for flashing inside and outside corners on curbs, parapets and scuppers.

CODE: 12842 (Grey)

QUICK SEAM FLASHING

Designed for flashing metal roof edging profiles.

CODE: 11248 (30.5m x 140mm)

UNIVERSAL PIPE FLASHING

Designed to be used in roofing applications for flashing of round penetrations.

CODE: 11057 (Grey)

10565 (180 x 110mm)

47

TPO

& B

ITU

MEN

AC

CES

SOR

IES

ACCESSORIES

ARDEX STB & STA TAPE

An uncured butynol tape with a fleece layer that is used in the ARDEX WPM 155 Rapid under tile waterproofing system.

CODE: 16870 (15m x 75mm STB Tape) 19216 (2.4m x 40cm STA Tape)

ARDEX CA 750 CONTACT ADHESIVE

A ready to use water based contact adhesive for bonding both vinyl skirting or ARDEX Undertile Butynol® Membrane (WPM 750 or WPM 1000).

CODE: 24196 (15L pail)

ARDEX CATALYST SPRAY

ARDEX Catalyst Spray with the use of Speedtec technology is a clear solution which when applied to nominated ARDEX Adhesives accelerates the tack time for quicker installation of floor coverings. This also acts as an innate film formation for ARDEX WPM 179 – Single Component Rubber Membrane.

CODE: 16550

NB: Other ARDEX WeldTec accessories include under tile profile strips, corners and detail patches.48

Wel

dTec

AC

CES

SOR

IES

GENERAL CONSTRUCTION

CRACK REPAIR & INJECTION, REPAIR MORTARS AND FACADE SYSTEMS

ARDEX BR 340 MICROTEC® Fibre-Reinforced, Polymer-Modified, Structural Concrete Patching and Repair Mortar is designed for reinstating concrete surfaces damaged through concrete spalling and other chemical or mechanical causes. ARDEX BR 340 is a high-build patching mortar and is capable of being applied up to a thickness of 80mm in one application on vertical, horizontal and overhead surfaces. It is designed to be used in conjunction with an appropriate ARDEX bonding bridge or primer and ARDEX BRX 60 LO Low Output Anodes for ultimate corrosion control and cathodic prevention.

LOCATION

Internal/External

SUBSTRATES

Concrete

THICKNESS

10–80mm

BENEFITS

MICROTEC® fibre-reinforced, polymer modified with good adhesion to concrete. Contains active corrosion inhibitor and is shrinkage compensated.

COVERAGE

1.25m2 at 10mm thickness

DRYING AND CURING: • Pot life at 23°C is 30–45 minutes • Initial Set: 45–90 minutes • Final Set in 90 minutes–3 hours

PACKAGING CODE

20kg bag 24611

ARDEX BR 340

STRUCTURAL CONCRETE PATCHING & REPAIR MORTAR

HIGH-RESISTIVITY, STRUCTURAL CONCRETE PATCHING & REPAIR MORTAR

ARDEX BR 345 MICROTEC® Fibre-Reinforced, High Resistivity, Polymer-Modified, Structural Concrete Patching and Repair Mortar is designed for reinstating concrete surfaces damaged through concrete spalling and other chemical or mechanical causes. ARDEX BR 345 is a high-build patching mortar and is capable of being applied up to a thickness of 80mm in one application on vertical, horizontal and overhead surfaces. It is designed to be used for applications where high resistivity of the mortar is required. For applications where anodes are required, use ARDEX BR 340 instead.

LOCATION

Internal/External

SUBSTRATES

Concrete

THICKNESS

10–80mm

BENEFITS • MICROTEC® fibre-reinforced, high-resistivity,

polymer modified with excellent adhesion to concrete. Contains active corrosion inhibitor and is shrinkage compensated.

• Potable water approved

COVERAGE

1.25m2 at 10mm thickness

DRYING AND CURING: • Pot life at 23°C is 30–45 minutes • Initial Set in 45–90 minutes • Final Set in 90 minutes–3 hours

PACKAGING CODE

20kg bag 25475

ARDEX BR 345

50

REP

AIR

MO

RTA

RS

FLOWABLE STRUCTURAL MICRO CONCRETE

ARDEX BR 460 FLOW High-Performance, Flowable Structural Micro Concrete is a pourable repair mortar designed for reinstating horizontal concrete surfaces damaged through concrete spalling and other chemical or mechanical causes. ARDEX BR 460 FLOW exhibits superior flow characteristics and is capable of being applied in thicknesses of 20mm to 200mm in one pour. It is designed to be used in conjunction with ARDEX BRX 60 LO Low Output Anodes for ultimate corrosion control and cathodic prevention.

LOCATION

Internal/External

SUBSTRATES

Concrete

THICKNESS

20–200mm

BENEFITS

Low odour, polymer modified with good adhesion to concrete. Contains active corrosion inhibitor and is shrinkage compensated.

COVERAGE

20kg of powder makes approximately 10L of mortar.

• 0.5m2 at 20mm thickness • 0.1m2 at 100mm thickness

DRYING AND CURING: • To be used immediately after mixing • Initial Set in 5–8 hours • Final Set in 6–9 hours

PACKAGING CODE

20kg bag 24543

ARDEX BR 460 FLOW

ARDEX BR 10 ZP is a zinc-rich, cold galvanising primer for long-term, extra heavy duty corrosion protection. It is designed to prevent corrosion through galvanic protection by forming a protection barrier, encapsulating the metal in a zinc film. This is ideal for use on clean, rust free steel in highly corrosive environments such as coastal regions and for use on all structural steelwork. ARDEX BR 10 ZP will react on ferrous metals to replace damaged surfaces and provide a protective barrier.

LOCATION

Internal/External

SUBSTRATES

Structural steel

COVERAGE

Practical coverage may depend on surface profile, method of application and dry film thickness. Higher film thickness will lead to lower coverage. Cooler temperature, higher film thickness, or higher humidity conditions will lead to longer drying times. As a guide, 20 litres of ARDEX BR 10 ZP will cover 9m2.

COLOURS

Grey

DRYING AND CURING: • Touch-dry in 30 minutes • Re-coat time in 16 hours

PACKAGING CODE

1L pail 25472

ZINC-RICH EPOXY PRIMER

ARDEX BR 10 ZP

51

REP

AIR

MO

RTA

RS

ARDEX BRP 30 EP is a two-component, solvent-free, high-strength, structural epoxy bonding agent specially formulated for bonding concrete and cementitious materials to existing concrete.

• Has excellent adhesion to many building materials even when damp

• Can be applied to damp concrete • Solvent-free and low odour

USES • Bonding bridge for ARDEX BR Repair Mortars • Specially designed for situations where the

substrate is likely to remain damp or wet • For repairs on bridges, roads, wharves,

loading docks, warehouses and factories

SUBSTRATES

Concrete, repair mortars, construction grouts and renders

COVERAGE

Approximately 5 - 9m2 per 1.75L kit. The coverage may vary due to surface porosity, absorption of the substrate and wastage factors.

COLOURS

Light Grey

POT LIFE

30 - 60 minutes @ 23°C and 50% RH

MAX OVERLAY TIMES

3h @ 15°C and 50% RH 2h @ 25°C and 50% RH 1h @ 35°C and 50% RH

The new concrete or repair material shall be applied to the wet ARDEX BRP 30 EP bonding agent while it is still tacky.

PACKAGING CODE

Part A: 1.25L (2kg)Part B: 0.5L (0.5kg) 26083

ARDEX BRP 30 EP

SOLVENT-FREE STRUCTURAL EPOXY BONDING AGENT

SACRIFICIAL ZINC ANODES FOR CATHODIC PREVENTION

ARDEX BRX 60 LO Low Output Anodes have been developed specifically for corrosion control and cathodic prevention to be used in conjunction with the ARDEX BR Repair Mortar Range. The core of the ARDEX BRX 60 LO Anode is a 60gm sheet of zinc coated with an activation paste.

• No complex design • No wiring installation or external power

source needed • No regular checking and adjustment

of current supply • Simple and easy installation • Cost-effective and attractive

TYPICAL USES

Columns, beams and slabs, balconies, precast and in-situ cast façade, pipes, foundations, wharf beams and soffits, car parks, retaining walls, tunnel linings.

LOCATION

Internal/External

PACKAGING CODE

1 anode 25304

ARDEX BRX 60 LO

AN

OD

ES A

ND

BO

ND

ING

AG

ENTS

52

GENERAL PURPOSE, HIGH-STRENGTH, CLASS-A-TYPE CONSTRUCTION

HIGH PERFORMANCE, HIGH-STRENGTH, CLASS-C-TYPE CONSTRUCTION GROUT

ARDEX BG 90 GP ARDEX BG 140 HP

ARDEX BG 90 GP is a general purpose, high-strength, Class-A-Type construction grout that can be mixed to a non-slump or pourable mix and is suitable for a wide range of projects and applications. The cement-based formulation contains additives that provide positive expansion when the grout is in its plastic state and is also shrinkage compensated when in the hardened state. It is ideal for applications where high compressive and flexural strength is required.

LOCATION

Internal/External

SUBSTRATES

Concrete

THICKNESS

12–100mm

BENEFITS • High compressive strength and versatile • Positive expansion when the grout is in it's

plastic state

COLOURS

Grey powder

DRYING AND CURING • Pot life is 20 minutes • Initial set: 30 minutes (stiff),

2-4 hours (plastic), 4-6 hours (flowable) • Final set: 30 minutes - 1 hour (stiff),

3 hours - 5 hours (plastic), 5 -7 hours (flowable)

PACKAGING CODE

20kg bag 25104

ARDEX BG 140 HP is a high-performance, high-strength, Class-C-Type construction grout that can be mixed to a fluid, flowable or plastic mix and is suitable for a wide range of projects and applications. The cement-based formulation contains additives that provide positive expansion when the grout is in its plastic state as well as in its hardened state. It is suitable for applications requiring a grout thickness between 12mm and 100mm. ARDEX BG 140 HP is ideal for applications where high compressive and flexural strength is required. Depending on the water ratio, a compressive strength of up to 75MPa is achieved after 7 days and 90MPa after 28 days.

LOCATION

Internal/External

SUBSTRATES

Concrete

THICKNESS

12–100mm

BENEFITS • High compressive strength and versatile • Ideal for precision grouting applications • Positive expansion when the grout is in it's

plastic and hardened state

COLOURS

Grey powder

DRYING AND CURING • Pot life is 20-30 minutes • Final set: 1-3 hours (trowelable)

3-6 hours (flowable), >6 hours (fluid)

PACKAGING CODE

20kg bag 30101

53

CO

NST

RU

CTI

ON

GR

OU

T

GENERAL PURPOSE ACRYLIC RENDER

FIBRE-REINFORCED POLYMER RENDER

ARDEX WR 80 FR is a fine-medium grade render and is suitable for rendering walls, both internally and externally, at application thicknesses from 2–10mm. When used with an appropriate pump, a build-up of 40mm can be achieved in one coat.

LOCATION

Internal/External

SUBSTRATES

Masonry (Brickwork & Blockwork), Concrete walls, AAC – Autoclaved Aerated Concrete Blocks and Panels, EPS Foam Panels, Existing Render, Blueboard, Painted surfaces.

THICKNESS

2–10mm

BENEFITS

No maturing time required; can be applied immediately after mixing.

COVERAGE

Coverage will vary depending on the condition of the surface and site conditions. As a guide, 20kg of ARDEX WR 80 FR mixes to 13 litres of mortar. As a guide, 20kg will cover:

• 6.5m2 at 2mm thickness • 2.6m2 at 5mm thickness

COLOURS

Grey powder

DRYING TIMES • Touch-dry in 1–2 hours • Subsequent coats after 4–8 hours

PACKAGING CODE

20kg bag 30147

ARDEX WR 80 FR ARDEX WR 100

ARDEX WR 100 is a fine-grade acrylic render suitable for rendering walls, both internally and externally, at application thicknesses of 2–10 mm. ARDEX WR 100 is easy to use due to its superior non-slump and creamy consistency.

• No maturing time required – can be applied immediately after mixing

LOCATION

Internal/External

SUBSTRATES

Masonry (Brickwork & Blockwork), Concrete walls, AAC – Autoclaved Aerated Concrete Blocks and Panels.

THICKNESS

2–10mm

BENEFITS

No maturing time required, can be applied immediately after mixing.

COVERAGE

Coverage will vary depending on the condition of the surface and site conditions. As a guide, 20kg of ARDEX WR 100 mixes to 13 litres of mortar. As a guide, 20kg will cover:

• 6.5m2 at 2mm thickness • 2.6m2 at 5mm thickness • 1.3m2 at 10mm thickness

COLOURS

Light grey powder

DRYING TIME • Touch-dry in 1–2 hours • Subsequent coats after 4–8 hours

PACKAGING CODE

20kg bag 23638

54

REN

DER

S A

ND

PR

IMER

& A

DD

ITIV

E

ARDEX WR Prime is a performance enhancing primer and additive for renders and other cement based construction products.

• Enhances bond strength, increases flexibility and working time of cement based construction products

• Improves surface strength and adhesion of cement based render

• Ideal as a primer and additive for most cement based construction products

LOCATION

Internal/External

SUBSTRATES

Masonry (Brick & Blockwork), Concrete walls, AAC – Autoclaved Aerated Concrete Blocks and Panels, Existing Render, Blueboard, Fibre-cement Sheet.

BENEFITS

When used as an additive for cement based renders, adhesives, screeds and grouts, ARDEX WR Prime will significantly enhance bond strength and increase flexibility and working time. As a primer, it will improve adhesion to masonry, concrete walls, AAC panels, existing render, blueboard and fibre-cement sheet.

COVERAGE

One litre of ARDEX WR Prime is sufficient for approximately 6m2.

COLOURS

White liquid

DRYING TIMES

When used as a primer, allow to dry to a clear, thin film prior to application of subsequent products.

PACKAGING CODE

15L cube 23642

PERFORMANCE ENHANCING POLYMER PRIMER & ADDITIVE

FIBRE REINFORCED, POLYMER MODIFIED RENDER

ARDEX WR 120 FR is a fine-grade, fibre-reinforced, acrylic render suitable for rendering walls, both internally and externally, at an application thickness from 2–12mm. When used with an appropriate pump, a build-up of 30mm can be achieved in one coat.

• Fibre-reinforced to increase impact resistance and minimise cracking

LOCATION

Internal/External

SUBSTRATES

Masonry (Brickwork & Blockwork), Concrete Walls, AAC – Autoclaved Aerated Concrete, Blocks and Panels.

THICKNESS

2–12mm Up to 30mm when pump applied

BENEFITS

No maturing time required; can be applied immediately after mixing.

COVERAGE

Coverage will vary depending on the condition of the surface and site conditions. As a guide, 20kg of ARDEX WR 120 FR mixes to 13 litres of mortar.As a guide, 20kg will cover:

• 6.5m2 at 2mm thickness • 2.6m2 at 5mm thickness • 1.3m2 at 10mm thickness

COLOURS

Light grey powder

DRYING TIME • Touch-dry in 1–2 hours • Subsequent coats after 4–8 hours

PACKAGING CODE

20kg bag 24968

ARDEX WR 120 FR ARDEX WR PRIME

55

REN

DER

S A

ND

PR

IMER

& A

DD

ITIV

E

POLYURETHANE-BASED JOINT SEALANT

ARDEX RA 040 is a one-component, polyurethane-based joint sealant. It has excellent bond strength to most porous and non-porous substrates without the use of a primer. ARDEX RA 040 is non-sag and may be applied on vertical and horizontal surfaces.

• Excellent primerless adhesion to most substrates

• Excellent weathering and UV stability • Perfect for vertical and overhead repairs

LOCATION

Internal/External

SUBSTRATES

Aluminium, concrete, masonry, metals.

COVERAGE

Varies upon joint width and depth.

COLOURS

Grey and white

DRYING AND CURING

24 hours/2mm

PACKAGING CODE

600mL sausage 24541 (Grey) 24554 (White) 30596 (Off White)

ARDEX RA 040

ARDEX RA 030 PLUS is a one-component, moisture curing, professional grade, elastomeric, polyether expansion joint sealant. It has excellent bond strength to most porous and non-porous substrates without the use of a primer. ARDEX RA 030 PLUS is non-sag and may be applied on vertical and horizontal surfaces.

• No bubble formation or foaming during installation on damp surfaces

• Excellent primerless adhesion to most substrates

• Excellent weathering and UV stability • Movement capability: 50% of joint width • No Isocyanates, solvents, halogens or acids • Can be painted over

LOCATION

Internal/External

SUBSTRATES

EIFS, stucco, aluminium, concrete, masonry, wood, stone, glass, vinyl, fibre cement sheet, metals, PVC.

COVERAGE

Varies upon joint width and depth.

COLOURS

Grey

DRYING AND CURING

36–72 hours

VOC CONTENT

30g/L

PACKAGING CODE

600mL sausage 24540

ARDEX RA 030 PLUS

MOISTURE-CURING EXPANSION JOINT SEALANT

JOIN

T SE

ALA

NTS

56

HYBRID POLYURETHANE CRACK & SPALL REPAIR

FAST SETTING SEMI-RIGID POLYUREA JOINT SEALANT

ARDEX RA 56 is an ultra-low viscosity, 2-component hybrid polyurethane crack filler. It is a rapid curing concrete repair material used when minimal down time is crucial.

• Cures stronger than concrete • Ultra Low Viscosity – Offers deep

penetration into cracks • Rapid cure – Trafficable in less than

1 hour • Ideal for spall repair when mixed

with sand or aggregate

LOCATION

Internal/External

SUBSTRATES

Concrete

COVERAGE

Coverage varies with depth of fill area.

COLOURS

Grey

DRYING AND CURING

Open to full traffic in 60 minutes.

VOC CONTENT

17g/L

PACKAGING CODE

254mL cartridge 199304L commercial kit 30595

ARDEX RA 56 ARDEX RA 54

ARDEX RA 54 is used to fill interior control joints or new construction saw joints on horizontal concrete surfaces. With a very rapid cure time, repaired joints can be opened to traffic in 90 minutes.

• Fill interior control joints or new construction joints

• Heavy duty vehicle traffic – Designed for individual floor applications

• Rapid cure – Trafficable in 90 minutes

LOCATION

Designed for industrial floor applications receiving heavy duty vehicle traffic. This can be used in exterior applications, when minimal (10% to 12%) joint movement from thermal cycling will occur.

SUBSTRATES

Concrete

COVERAGE

Approx. 3 linear metres with a joint size of 3 x 25mm.

COLOURS

Grey

DRYING AND CURING

Can be shaved in approx. 45 minutes, open to full traffic in 90 minutes.

VOC CONTENT

7g/L

PACKAGING CODE

254mL cartridge 1992940kg commercial kit 8004938

57

CR

ACK

REP

AIR

AN

D IN

JEC

TIO

N

ULTRA-FAST CURE ACRYLIC ADHESIVE

ARDEX RA 84 is a two-component, non-sag, styrene-free, acrylic system used for anchoring and dowelling applications in uncracked concrete using threaded rod and rebar. Due to its ultra-fast cure time, it is an ideal capping gel for ARDEX Crack Injection applications. ARDEX RA 84 is moisture insensitive, allowing installation and curing in damp, water-saturated environments.

• Ultra-fast 30 minute full cure time at 25°C in dry concrete

• High bond strength with fast cure times • Easily dispensable even at low temperatures • Styrene-free • Non-sag

SUBSTRATES

Concrete

COLOURS

Light grey

DRYING AND CURING

20 minutes – 4 hours depending on substrate conditions.

PACKAGING CODE

300ml cartridge 30509

ARDEX RA 84

MULTI-PURPOSE EPOXY REPAIR ADHESIVE

ARDEX RA 88 is a two component, high performance ceramic blend epoxy. No-drip, non-sag, repair adhesive perfect for horizontal, vertical and overhead use (trowelable).

• Non-sag – Perfect for overhead and vertical repairs

• High strength – Stronger than concrete • Trowelable and cure underwater • Potable water approved

LOCATION

It can also be used for repairing holes, spalls and cracks in concrete, repairing rotted wood, installing anchor bolts and repairing hand rails.

SUBSTRATES

Almost any material, including metal, concrete, brick, wood, stone, block and other substrates.

COVERAGE

Approx. 6 linear metres with a bead thickness of 6 x 6mm.

COLOURS

Grey

DRYING AND CURING

Open to full traffic in 2–3 hours, ready to receive paint in 2–3 hours.

VOC CONTENT

53g/L

PACKAGING CODE

254mL cartridge 19927

ARDEX RA 88 PLUS

58

CR

ACK

REP

AIR

AN

D IN

JEC

TIO

N

STRUCTURAL CONCRETE CRACK INJECTION EPOXY

ARDEX RA 142

ARDEX RA 142 is a Super Low Viscosity, two-component epoxy adhesive perfect for gravity-feed and pressure injection repair of hairline to fine width horizontal cracks. It can also be used as an epoxy mortar for spall repair when mixed with aggregate.

• Very thin liquid for superior crack penetration • 100% solids, solvent free system with low

VOC content • Pressure injection and gravity feed structural

crack repair in horizontal concrete, masonry for cracks from 0.05mm to 3mm

• Epoxy resin binder for epoxy mortar patching and overlay of interior surface using addition of aggregate

• Shear fracture repairs on interior and exterior concrete slabs

LOCATION

Internal/External

SUBSTRATES

Almost any material

COVERAGE

Coverage varies

COLOURS

Amber tint

DRYING AND CURING

Fully cured in 24 hours

VOC CONTENT

8g/L

PACKAGING CODE

470mL dual cartridge 22780

ARDEX RA 144 is a low viscosity, high modulus structural epoxy adhesive used for a variety of repair projects. It can also be used as an epoxy mortar for spall repair when mixed with aggregate.

• 100% solids, solvent free system with low VOC content

• Pressure injection and gravity feed structural crack repair in horizontal concrete, masonry for cracks from 3mm to 6mm

• Epoxy resin binder for epoxy mortar patching and overlay of interior surface using addition of aggregate

• Shear fracture repairs on interior and exterior concrete slabs

LOCATION

Internal/External

SUBSTRATES

Almost any material

COVERAGE

Coverage varies

COLOURS

Amber tint

DRYING AND CURING

Fully cured in 24 hours

VOC CONTENT

8g/L

PACKAGING CODE

470mL dual cartridge 22791

ARDEX RA 144

STRUCTURAL CONCRETE CRACK INJECTION EPOXY

59

CR

ACK

REP

AIR

AN

D IN

JEC

TIO

N

BLINDSIDE CONCRETE CRACK INJECTION EPOXY GEL

ARDEX RA 146 is a thixotropic structural epoxy adhesive system with a gel-like consistency ideal for repair of medium size cracks (6–10mm) when using an injection port system. It is a high strength epoxy system perfect for blind-side crack repair of most substrates. It will bond the structure back to its original monolithic strength.

• Structural crack repair of medium to large cracks

• Pressure injected blind-side crack repairs such as basement or foundation walls or parking garages

• Pressure injection for cracks from 6mm to 10mm

• 100% solids, solvent free system with low VOC content

LOCATION

Internal/External

SUBSTRATES

Almost any material

COVERAGE

Coverage varies

COLOURS

Concrete grey

DRYING AND CURING

Fully cured in 24 hours

VOC CONTENT

16g/L

PACKAGING CODE

470mL dual cartridge 22792

ARDEX RA 146

60

CR

ACK

REP

AIR

AN

D IN

JEC

TIO

N

CARBON-FIBRE CRACK BRIDGING STITCH

CONCRETE CRACK LOCK

The Concrete Crack Lock (CCL) is a revolutionary new product that was developed to improve concrete crack repair. Once installed, the CCL permanently bonds both sides of the crack together. Due to the unique shape of the CCL and the preparation in the concrete, the tensile strength of the carbon fibre is relied upon as well as the epoxy bond strength along its length.

TYPICAL USES

The Concrete Crack Lock has been engineered to stop cracks in concrete slabs, poured walls, masonry, concrete block foundations, columns, industrial buildings, bridges, and foundations. The CCL System is designed for cracks of various sizes under virtually any circumstance. It can also be used to increase seismic strength to repairs after an earthquake.

BENEFITS

High Strength, Non-Corrosive and Alkali Resistant with Minimal Aesthetic Impact.

UNPARALLELED STRENGTH

The Concrete Crack Lock permanently locks both sides of the crack together, preventing any further movement. Due to the shape of the Concrete Crack Lock, the tensile strength of the carbon fibre is maximise permanently holding both sides of the crack together. The Concrete Crack Lock eliminates any potential for corrosion, and reduces call-backs.

PACKAGING

Bag of 20 30440

Exclusively distributed in Australia by

R H I N O C A R B O N F I B R E C O N C R E T E C R A C K L O C KIntroducing a revolutionary new concrete repair product designed to make crack reinforcement more e�cient and less labour intensive.

TM

61

CO

NC

RET

E C

RAC

K L

OC

K

CRACK REPAIR AND INJECTION ACCESSORIES

ARDEX INJECTION T-PORT T-PORT 25-PACK CODE: 23617

Injection Ports for ARDEX Crack Injection Range.

ARDEX INJECTION CHECK WINDOWS CHECK WINDOW 25-PACK CODE: 23618

Check windows for ARDEX Crack Injection Range.

HEAVY DUTY DUAL-CARTRIDGE CAULKING GUN (2:1 RATIO) 470ML CODE: 23609

Recommended dispensing gun for ARDEX Crack Injection Epoxies.

ARDEX RA 56 NOZZLE – 3-PACK CODE: 19973

Mixing nozzles for ARDEX RA 56.

HEAVY DUTY CAULKING GUN CODE: 20281

Recommended dispensing gun for ARDEX Crack Repair Range.

ARDEX RA 88/54 NOZZLE – 3-PACK CODE: 19972

Mixing nozzles for ARDEX RA 54, RA 84 & RA 88.

ARDEX INJECTION MIXING NOZZLE – 3-PACK CODE: 23615

Mixing nozzles for ARDEX Crack Injection Range.

CR

ACK

REP

AIR

AN

D IN

JEC

TIO

N A

CC

ESSO

RIE

S

62

DISCLAIMER

The technical details, recommendations and other information contained in this catalogue are given in good faith and represent the best of our knowledge and experience at the time of printing. It is your responsibility to ensure that our products are used and handled correctly and in accordance with any applicable Australian Standard, our instructions are recommendations and only for the uses they are intended.

We also reserve the right to update information without prior notice to you to reflect our ongoing research and development program. Country specific recommendations, depending on local standards, codes of practice, building regulations or industry guidelines, may affect specific installation recommendations. The supply of our products and services is also subject to certain terms, warranties and exclusions, which may have already been disclosed to you in prior dealings or are otherwise available to you on request. You should make yourself familiar with them.

© ARDEX Australia Pty Ltd 2020

63

ARDEX DIGITAL SERVICES

Website:

All the information you need in one place.

ardexaustralia.com

Apple & Android Apps:

The ARDEX app is a slimmed down version of the website and hosts a variety of helpful features in the palm of your hand.

YouTube:

Access an extensive video library with helpful how-to videos.

youtube.com/ardexaustralia

Facebook: • Introduction of new products • Access to video library • And much more...

facebook.com/ArdexAU

Twitter:

Product news & updates.

twitter.com/ardexaustralia

Instagram:

Images of ARDEX related projects around Australia.

instagram.com/ardexaustralia

LinkedIn:

Industry news & updates from our team of experts.

Search for ARDEX Australia

App Store

(search for “ARDEX Australia”)

Google Play Store

(search for “ARDEX Australia”)

64

Twitter:

Product news & updates.

twitter.com/ardexaustralia

App Store

(search for “ARDEX Australia”)

NOTES

65

NOTES

66

NOTES

67

ARDEX AUSTRALIA PTY LTD

7/20 Powers Road Seven Hills NSW 2147

1300 788 780

technicalservices@ardexaustralia.com www.ardexaustralia.com

ARDEX NEW ZEALAND LTD

15 Alfred Street Onehunga, Auckland 1061

0800 227 339

info@ardexnz.com www.ardex.co.nz

Stockist details:

0320

TOLL FREE TECHNICAL SERVICES

1800 224 070 (Australia) 0800 227 339 (NZ)