Water Resources -...
Transcript of Water Resources -...
![Page 1: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/1.jpg)
Water Resources
CPS-Pumps125 Morrison DriveRossville, TN 38066Phone: (901) 850-5115Fax: (901) 850-5119www.cps-pumps.com
![Page 2: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/2.jpg)
www.cps-pumps.com CPS-Pumps Water Resources 02/15/2019 Revision 1A
2World Class Centrifugal Pump Manufacturer
CPS-Pumps is a 30+ year old, world leading, centrifugal pump manufacturer. We have 29 com-plete product lines over the most complete flow and pressure of-fering in the industry today. We have multiple manufacturing facilities located throughout the world and pour our product line in standard materials and offer one of the most numerous metal-lurgical options in the industry.
Research & Design
CPS-Pumps has a vast Research & Development group that enhances current designs and develops new designs when client needs require it. We use Com-puter Aided Design software coupled with three dimensional flow field simulation analysis and rotor dynamics and supporting reliability simulation analysis for our mechanical design. We use 3-D printing capability for rapid prototype testing and confirma-tion of computation fluid dynam-ic design.
Our engineering software also guides in the design of the follow-ing:
• Lateral vibration analysis• Torsional vibration analysis• Axial vibration analysis• Static deflection• Bearing stiffness
To confirm casting and design calculations, we have a state of the art testing facility at our disposal. In this facility we have an Ingle & Burke direct-reading mass spec-trometer, metallurgical analysis meter, tensile & yield strength destructive testing equipment, X-ray and ultrasonic non-destruc-tive testing capabilities.
With 30+ years of design experi-ence, trust CPS-Pumps for your next application.
Hydraulic Testing Facilities
We have multiple, third party certified testing facilities used to confirm hydraulic performance. With flows through 90,000 gal-lons per minute and horsepowers through 1500 HP, be assured that we can confirm your job site re-
quirements. We can provide both non-witnessed and witnessed testing based on client requirements. All drivers, flow meters, electrical equipment and pressure gauging is ISO-17025 certified and the test lab has been certified by bit Under-writers Laboratory and Factory Mutual.
Manufacturing
We have a vast manufacturing capability that we have invested in for the last three decades. CPS-Pumps has the ability to manu-facture 25,000 pump assemblies per year and pour 10,000 tons of raw materials. This vast amount of capacity was added to give the client a readily available product, competitively priced and of the highest quality available today.
Quality Assurance
CPS-Pumps also has the high-est quality assurance standards available today. We are currently ISO-9001:2015 certified. We pride ourselves on our quality and continue to invest in our quality assurance systems.
Corporate
![Page 3: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/3.jpg)
www.cps-pumps.comCPS-Pumps Water Resources 02/15/2019 Revision 1A
3
Water Resources
The Water Resources markets are arguably one of the most impor-tant global markets in the world today. Anywhere where people live, they must have water re-sources. The CPS-Pumps prod-uct line is very diverse and offers the most important pump types needed for this very important market. In addition to the actual products, the product line can be customized to meet the ever changing needs of the engineer-ing community. From special metallurgy, special fabricated options to nearly any engineered coating, CPS-Pumps has an engi-neering staff to meet these needs.
CPS-Pumps offers a wide variety of pumps used in Water Resource applications. These include end suction, vertical column, non-clog, split case, chemical process, vertical turbine and self-primer. These pump configurations can be supplied in packed or me-chanical seal construction and can be poured in a variety of materi-
Water Resources
als. These cast materials include class 30 cast iron, ductile iron, all bronze, all 304 stainless steel, all 316 stainless steel, all Cd4MCu, all Alloy 20, all Hastalloy (B&C), all 2205 super duplex stainless steel, all 2507 super duplex stain-less steel, Cr28 and all Titanium.
CPS-Pumps regularly supplies pumps for transporting water from surface locations such as reservoirs, lakes, canals, rivers and from deepwell locations when surface water is not available.
Applications
DesalinationChemical TreatmentDistributionRaw Water IntakeSedimentationFiltrationBackwashSewage Treatment
Available Products
XA Flex-Coupled End Suction PumpsAQU Close-Coupled End Suc-tion PumpsKTG Vertical Inline End Suction PumpsVS-CNC, AQU, CSG & CSD Vertical Sump PumpsCNC Non-Clog PumpsSP Horizontal Splitcase PumpsB-SP Bottom Suction Splitcase PumpsV-SP Vertical Splitcase PumpsHML, HMM & HMH Multi-stage PumpsCSG ANSI Process CSD ANSI ProcessVMS Vertical Multistage PumpsCVT Vertical Turbine PumpsCMF Mixed Flow PumpsCAF Axial Flow PumpsCST Submersible Turbine PumpsSPT Self-Primer Trash PumpsSPU Self-Primer Utility PumpsSLS Self-Primer PumpsSPD Self-Primer Diaphragm Pumps
![Page 4: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/4.jpg)
www.cps-pumps.com CPS-Pumps Water Resources 02/15/2019 Revision 1A
The CPS-Pumps product line offers many different models for pumping water from surface and sub-surface locations. A complete vertical turbine product line is manufactured by CPS-Pumps for raw water intake applications. A complete axial flow (CAF) and mixed-flow (CMF) product line is also available for storm water, canal supply and flood control ap-plications.
Pumps can also be manufactured out of optional materials where brackish or salt water is used in the supply of water as seen in reverse osmosis applications. When these types of fluids are used special optional metallurgies are necessary for proper opera-
tion.
Water distribution applications also use a variety of horizontal split case and vertical turbine pumps. CPS-Pumps has one of the most hydraulically complete split case and vertical turbine product lines available today. These pumps can be supplied with a nearly unlimited number of options, coatings and fabricated components.
Wastewater applications also are demanding in their design and construction. CPS-Pumps manufactures a complete line of non-clog pumps specifically designed and suited for large
spherical solids pumping applications.
These pumps can be supplied in flooded suction and/or self-prim-er orientations. The collection and treatment of these solids are critical to the entire environmen-tal community.
Self-primer pumps (SPT & SPU)are designed with long life in mind and feature a dual oil reservoir design. One reservoir supplies oil to the power frame as-sembly and the supplies oil for the mechanical seal assembly
The CPS-Pumps non-clog pumps (CNC) feature dedicated two vane, enclosed impellers spe-cifically designed to pump large spherical, stringy and limp solids in suspension and solution. The
4
Water Supply
![Page 5: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/5.jpg)
www.cps-pumps.comCPS-Pumps Water Resources 02/15/2019 Revision 1A
impeller eye on these non-clog pumps are rounded & tapered specifically designed for solids pumping.
The agricultural and irrigation markets around the world turn arid environments into land that can produce a variety of agricul-tural products. From soybeans, grapes, corn and wheat, these pumps are critical for food pro-duction in all parts of the world. CPS-Pumps manufactures a va-riety of vertical & submersible as well as axial & mixed flow pumps for pumping water from surface or sub-surface locations. A wide variety of horizontal pumps including end suction, split case and
self primers round out the of-fering making CPS-Pumps an unmatched source for your pump-ing equipment.
Pumps used in irrigation can source water from rivers, lakes, streams, canals and wells. For deepwell applications CPS-Pumps manufactures a full ver-tical turbine, as well as one of the most complete submersible turbine product lines available in the industry today. The submers-ible turbine pumps are perfectly suited for the many pivot applica-tions used to irrigate crops where surface water is not readily avail-able.
Irrigation pumps for livestock are also important to the farming in-dustry. The CPS-Pumps product line can supply water in this appli-cation from surface or sub-surface locations. This industry also uses non-clog product for the removal of animal waste. CPS-Pumps has a full flooded suction and self-primer product line that are perfectly suited for this demand-ing application.
Two-vane, semi-open impeller designs (SPT & SPU) are de-signed specifically for these waste applications and allow the passing of solids through three (3) inches
in diameter.
5
Irrigation
![Page 6: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/6.jpg)
www.cps-pumps.com CPS-Pumps Water Resources 02/15/2019 Revision 1A
6
Overhung Pum
psG
eneral End Suction
AQU Close-Coupled End Suction
Standards• CPS-Pumps
Operating Parameters• Flows to 9,000 GPM (2,044 m3/hr) • Heads to 450 FT (140 m)• Pressures to 195 PSI (13 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 1.25×2-5 (32/13) – 12×14-16 (300/40)
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Francis, enclosed, high efficiency impeller with broad band operating range• Cast iron casing/investment cast 304 stainless steel impeller• Casing has cast integral feet under the volute• 125 pound suction flange and 125 pound discharge flange with both cast to 250 pound dimensions• Impeller has back pump out vanes to keep seal chamber free of debris• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Standard CPS-21 mechanical seal with Carbon/ Silicon Carbide faces• Internal seal flush• Optional packing• Replaceable case wear ring standard• Turned, ground and polished 420 stainless steel shaft standard• Utilizes, stocked, standard C-Face motors 56C through 449TC brackets for coupling to drivers
KTG Vertical Inline End Suction
Standards• CPS-Pumps
Operating Parameters• Flows to 9,000 GPM (2,044 m3/hr) • Heads to 450 FT (140 m)• Pressures to 195 PSI (13 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 2×2-5 (50/13) – 14×14-16 (350/40)
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Francis, enclosed, high efficiency impeller with broad band operating range• Cast iron casing/investment cast 304 stainless steel impeller• Casing has cast integral base under the volute• Suction and discharge are on same vertical centerline• 125 pound suction flange and 125 pound discharge flange with both cast to 250 pound dimensions• Impeller has back pump out vanes to keep seal chamber free of debris• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Standard CPS-21 mechanical seal with Carbon/ Silicon Carbide faces• Internal seal flush• Optional packing• Replaceable case wear ring standard• Turned, ground and polished 420 stainless steel shaft standard• Utilizes, stocked, standard C-Face motors 56C through 449TC brackets for coupling to drivers
XA Flex-Coupled End Suction
Standards• CPS-Pumps
Operating Parameters• Flows to 24,000 GPM (5,500 m3/hr) • Heads to 450 FT (140 m)• Pressures to 195 PSI (13 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 1.25×2-5 (32/13) – 28×32-24 (700/60)
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Francis, enclosed, high efficiency impeller with broad band operating range• Cast iron casing/investment cast 304 stainless steel impeller• Casing has cast integral feet under the volute• 125 pound suction flange and 125 pound discharge flange with both cast to 250 pound dimensions• Impeller has back pump out vanes to keep seal chamber free of debris• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Standard CPS-21 mechanical seal with Carbon/ Silicon Carbide faces• Internal seal flush• Optional packing• Replaceable case wear ring standard• Turned, ground and polished 420 stainless steel shaft standard• Oil lubricated power frame with 100,000 hour minimum bearing life• Dual oil lip seal construction with bearing isolators as an option • Optional grease lubricated power frame
See AQU Product Bulletin See KTG Product Bulletin See XA Product Bulletin
![Page 7: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/7.jpg)
www.cps-pumps.comCPS-Pumps Water Resources 02/15/2019 Revision 1A
7
CSG ANSI Standard CSD ANSI Standard
Standards• ASME (ANSI) B73.1M • CPS-Pumps
Operating Parameters• Flows to 7,400 GPM (1,680 m3/hr) • Heads to 1000 FT (300 m)• Pressures to 450 PSI (30 bar)• Temperatures From -100°F (-75°C) to 500°F (260°C)
Size Range• 1×1.5-6 (26/16) – 8×10-16 (200/40)
Markets• Chemical Processing, Food & Beverage, General Industry, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Reverse-vane impeller with hydraulic balancing holes• Low flow impeller - Circular, concentric casing• 125# suction/125# discharge flange drilled & tapped for easy connection to system piping• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Standard Next-Gen CS power frame - External micrometer impeller adjustment that has 0.002” graduations cast on the bearing carrier - Double row angular contact outboard bearings - Single row, deep groove inboard bearings - Double lip oil seals - Constant level oiler - Large, reflective sight glass• Choice of lubrication systems• Five (5) choices of seal chambers - Large bore (FML, CBL) - Small bore (FMS, CBS) - Internal (FMI)• Largest shaft and bearing components in standard ANSI pumps
Standards• ASME (ANSI) B73.1M • CPS-Pumps
Operating Parameters• Flows to 7,000 GPM (1,590 m3/hr) • Heads to 730 FT (223 m)• Pressures to 316 PSI (22 bar)• Temperatures From -100°F (-75°C) to 500°F (260°C)
Size Range• 1×1.5-6 (25/16) – 8×10-15 (200/38)
Markets• Chemical Processing, Food & Beverage, General Industry, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Multi-vane, semi-open, high efficiency impeller with broad band operating range • Low flow impeller - Circular, concentric casing• 125# suction/125# discharge flange drilled & tapped for easy connection to system piping• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Upgraded Next-Gen CS power frame - External micrometer impeller adjustment that has 0.002” graduations cast on the bearing carrier - Double row outboard bearings - Single row, deep groove inboard bearings - Bearing isolators - Large, reflective sight glass• Choice of lubrication systems• Five (5) choices of seal chambers - Large bore (FML, CBL) - Small bore (FMS, CBS) - Internal (FMI)
See CSG Product Bulletin See CSD Product Brochure
Overhung Pum
psProcess E
nd Suction
![Page 8: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/8.jpg)
www.cps-pumps.com CPS-Pumps Water Resources 02/15/2019 Revision 1A
8
Overhung Pum
psSolids H
andling - Non-Subm
ersible
CNC Flex- Coupled Horizontal Non-Clog
CNCV Vertical Flex-Coupled Non-Clog
VS-CNC Vertical Wet Pit Non-Clog
See CNC Product Bulletin See CNCV Product Bulletin See VS-CNC Product Bulletin
Standards• CPS-Pumps
Operating Parameters• Flows to 14,000 GPM (3,180 m3/hr) • Heads to 360 FT (110 m)• Pressures to 156 PSI (10.7 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 3×3-10 (80/26) – 14×14-26 (350/66)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Ductile iron casing (with clean-out port)/304 investment cast impeller• 125 pound suction flange and 125 pound discharge flange• Two vane, enclosed, high efficiency impeller with large solids passing capability• Pump out vanes on front & rear of impeller for hydraulic balancing with rounded & tapered impeller inlet designed to pass limp, stringy solids• Recessed impeller lock nut to prevent rags and other debris from clogging eye of the impeller• Back pull out assembly to simplify maintenance• Casing has integral clean-out access to remove debris and obstructions• Suction cover has integral clean-out access to remove debris and obstructions• Standard packed stuffing box with lantern ring• Optional CPS-21 component mechanical seal or CPS-50 cartridge mechanical with Carbon/ Silicon Carbide faces• Accu-Shock bushing protection at rear of casing to prevent excessive shaft deflection and bearing damage from rocks or other large objects that may enter the pumping assembly• Optional replaceable front wear plate• Volute can be rotated to allow for maximum flexibility in the field• Upgraded Next-Gen CS power frame with complete micrometer impeller adjustment• Oil lubricated power frame with 50,000 hour minimum bearing life
Standards• CPS-Pumps
Operating Parameters• Flows to 14,000 GPM (3,180 m3/hr) • Heads to 360 FT (110 m)• Pressures to 156 PSI (10.7 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 3×3-10 (80/26) – 14×14-26 (350/66)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Ductile iron casing (with clean-out port)/304 investment cast impeller• 125 pound suction flange and 125 pound discharge flange• Two vane, enclosed, high efficiency impeller with large solids passing capability• Pump out vanes on front & rear of impeller for hydraulic balancing with rounded & tapered impeller inlet designed to pass limp, stringy solids• Recessed impeller lock nut to prevent rags and other debris from clogging eye of the impeller• Back pull out assembly to simplify maintenance• Casing has integral clean-out access to remove debris and obstructions• Suction elbow has integral, heavy duty cast base with clean-out access to remove debris and obstructions• Standard packed stuffing box with lantern ring• Optional CPS-21 component mechanical seal or CPS-50 cartridge mechanical with Carbon/ Silicon Carbide faces• Accu-Shock bushing protection at rear of casing to prevent excessive shaft deflection and bearing damage from rocks or other large objects that may enter the pumping assembly• Optional replaceable front wear plate• Volute can be rotated to allow for maximum flexibility in the field• Grease lubricated power frame with 50,000 hour minimum bearing life
Standards• CPS-Pumps
Operating Parameters• Flows to 14,000 GPM (3,180 m3/hr) • Heads to 360 FT (110 m)• Pressures to 156 PSI (10.7 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 3×3-10 (80/26) – 14×14-26 (350/66)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Ductile iron casing (with clean-out port)/304 investment cast impeller• Two vane, enclosed, high efficiency impeller with large solids passing capability• Heavy duty, bronze, fluted inboard head bushing that can be supplied in a variety of optional materials• Pump out vanes on front & rear of impeller for hydraulic balancing with rounded & tapered impeller inlet designed to pass limp, stringy solids• Recessed impeller lock nut to prevent rags and other debris from clogging eye of the impeller• Optional replaceable front wear plate• Column lengths to 33 feet (10m)• Separate, heavy-duty line-shaft bearing housings with fluted bronze bearing that can be supplied in a variety of optional materials• Heavy wall lineshaft bearings• Replaceable case wear ring standard• Turned, ground and polished 420 stainless steel shaft standard• Utilizes, stocked, standard C-Face motors 56C through 449TC brackets for coupling to drivers
![Page 9: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/9.jpg)
www.cps-pumps.comCPS-Pumps Water Resources 02/15/2019 Revision 1A
9
Overhung Pum
psSolids H
andling - Self-Primer
SPT Self Priming Trash
Standards• CPS-Pumps
Operating Parameters• Flows to 5,000 GPM (1,136 m3/hr) • Heads to 120 FT (37 m)• Pressures to 52 PSI (3.5 bar)• Temperatures From 40°F (4°C) to 180°F (82°C)
Size Range• 2×2-6 (50/16) – 12×12-18 (300/46)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Two vane, semi-open, high efficiency impeller with large solids passing capability• Rounded & tapered impeller inlet designed to pass limp, stringy solids• Suction lift to 24 feet (8 m)• Heavy wall wet end components suitable for light slurries• Oversized from cover for inspection and removing obstructions• 125# suction/125# discharge flanges• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Heavy duty, 304 stainless steel shaft sleeve• Cartridge mechanical seal with Silicon-Carbide/ Silicon-Carbide faces standard• Impeller clearance adjustment can be done by adjusting the power frame or by adjusting the front cleanest plate• Carbon steel front and rear wear plates for abrasion resistance• Removal of suction check valve with out removal of suction piping• Dual oil lubrication chambers for mechanical seal and power frame• Solids passing capability to 3 inches (80 mm)• Many driver options (electric, gasoline, diesel)• Can be base mounted or trailer mounted• Optional SAE engine brackets
See SPT Product Bulletin
SPU Self Priming Utility
Standards• CPS-Pumps
Operating Parameters• Flows to 2,700 GPM (613 m3/hr) • Heads to 200 FT (61 m)• Pressures to 87 PSI (5.96 bar)• Temperatures From 40°F (4°C) to 180°F (82°C)
Size Range3×3-11 (80/28) – 6×6-12 (150/30)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Muli-vane, semi-open, high efficiency impeller with large solids passing capability• Rounded & tapered impeller inlet designed to pass limp, stringy solids• Suction lift to 24 feet (8 m)• Heavy wall wet end components suitable for light slurries• Oversized from cover for inspection and removing obstructions• 125# suction/125# discharge flanges• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Heavy duty, 304 stainless steel shaft sleeve• Cartridge mechanical seal with Silicon-Carbide/ Silicon-Carbide faces standard• Impeller clearance adjustment can be done by adjusting the power frame or by adjusting the front cleanest plate• Carbon steel front and rear wear plates for abrasion resistance• Removal of suction check valve with out removal of suction piping• Dual oil lubrication chambers for mechanical seal and power frame• Solids passing capability to 3 inches (80 mm)• Many driver options (electric, gasoline, diesel)• Can be base mounted or trailer mounted• Optional SAE engine brackets
SPL Self Priming Light Duty
Standards• CPS-Pumps
Operating Parameters• Flows to 500 GPM (114 m3/hr) • Heads to 135 FT (41 m)• Pressures to 58 PSI (4.03 bar)• Temperatures From 40°F (4°C) to 180°F (82°C)
Size Range1.5×1.5-6 (38/16) – 4×4-5 (100/12)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Multi-vane solids passing impeller• Suction lift to 24 feet (8 m)• Heavy wall wet end components suitable for light slurries• Hard faced mechanical seal• External grease fittings for mechanical seal and power frame• Solids passing capability to 2 inches (50 mm)• Many driver options (electric, gasoline, diesel)
See SPU Product Bulletin See SPL Product Bulletin
![Page 10: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/10.jpg)
www.cps-pumps.com CPS-Pumps Water Resources 02/15/2019 Revision 1A
V-SP Vertical Double Suction Split Case
Standards• CPS-Pumps
Operating Parameters• Flows to 30,000+ GPM (6813+ m3/hr) • Heads to 550 FT (168 m)• Pressures to 238 PSI (16 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 2.5×3-10 (65/24) – 40×48-38 (1000/98)
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Vertical orientation for space savings• Multi-vane, enclosed, high efficiency impeller with broad band operating range• Exclusive Thru-Bore casing that allows packing housings/seal chambers to be removed with the rotor assembly• Top bearing can be inspected and/or replaced with out removing casing top• Top roller bearing is of the deep groove, double roller bearing• Fully removable rotor assembly• Packing standard with optional CPS-21 or CPS-1 mechanical seals• Heavy duty, 304 stainless steel shaft sleeves with exclusive external o-ring groove• Bronze, API style, stepped case wear rings• 125# suction/125# discharge flange with 250# cast dimensions standard• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Proprietary outboard, heavy duty, fluted bushing that cannot be contaminated by the pumped fluid• 50,000+ hour minimum L10 bearing life standard• Oil lip sealed grease lubricated bearing
See V-SP Product Bulletin
10
Betw
een Bearings Pum
psSingle Stage - A
xially Split
SP Double Suction Split Case
See SP Product Bulletin
Standards• CPS-Pumps
Operating Parameters• Flows to 30,000+ GPM (6,813+ m3/hr) • Heads to 550 FT (168 m)• Pressures to 238 PSI (16 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 2.5×3-10 (65/24) – 40×48-38 (1000/98)
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Multi-vane, enclosed, high efficiency impeller with broad band operating range• Exclusive Thru-Bore casing that allows packing housings/seal chambers to be removed with the rotor assembly• Bearings can be inspected and/or replaced with out removing casing top• Fully removable rotor assembly• Packing standard with optional CPS-21 or CPS-1 mechanical seals• Heavy duty, 304 stainless steel shaft sleeves with exclusive external o-ring groove• Bronze, API style, stepped case wear rings• 125# suction/125# discharge flange with 250# cast dimensions standard• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Single row inboard and single row outboard bearings with optional double row at either location• 50,000+ hour minimum L10 bearing life standard• Oil lip sealed grease lubricated bearings with optional oil lubrication
B-SP Bottom Suction Split Case
Standards• CPS-Pumps
Operating Parameters• Flows to 30,000+ GPM (6813+ m3/hr) • Heads to 550 FT (168 m)• Pressures to 238 PSI (16 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 2.5×3-10 (65/24) – 40×48-38 (1000/98)
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Bottom suction orientation for space savings• Multi-vane, enclosed, high efficiency impeller with broad band operating range• Exclusive Thru-Bore casing that allows packing housings/seal chambers to be removed with the rotor assembly• Bearings can be inspected and/or replaced with out removing casing top• Fully removable rotor assembly• Packing standard with optional CPS-21 or CPS-1 mechanical seals• Heavy duty, 304 stainless steel shaft sleeves with exclusive external o-ring groove• Bronze, API style, stepped case wear rings• 125# suction/125# discharge flange with 250# cast dimensions standard• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Single row inboard and single row outboard bearings with optional double row at either location• 50,000+ hour minimum L10 bearing life standard• Oil lip sealed grease lubricated bearing
See B-SP Product Bulletin
![Page 11: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/11.jpg)
www.cps-pumps.comCPS-Pumps Water Resources 02/15/2019 Revision 1A
11
HML Multistage Split Case
Standards• CPS-Pumps
Operating Parameters• Flows to 900 GPM (204 m3/hr) • Heads to 950 FT (290 m)• Pressures to 411 PSI (28 bar)• Temperatures From 32°F (0°C) to 350°F (177°C)
Size Range• 1.5×2.5-8 (38/20) – 4×5-11 (100/28)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Marine & Offshore Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Cast iron casing/investment cast 304 stainless steel impellers• Exclusive Unified-Bore casing that allows the pump to be provided with packing or mechanical seals without any additional machining modification• Fully removable rotor assembly• Hydraulically opposed impeller orientation• Multi-vane, enclosed, high efficiency impeller with broad band operating range• Bronze, labyrinth style, case wear rings offer superior pressure boundary protection• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Heavy duty, 304 stainless steel shaft sleeves with separate shaft sleeve nuts• Packing standard with optional component and/ or cartridge mechanical seals available• 125# suction/250# discharge flange drilled & tapped for easy connection to system piping• Drilled & tapped suction & discharge flanges for easy connection to system piping• Grease lubricated bearings with optional ring oil lubrication• Optional bearing isolators• Single row inboard and single row outboard bearings with optional double row at either location• 50,000+ hour minimum L10 bearing life standard
See HML Product Bulletin
Betw
een Bearings Pum
psM
ultistage - Axially Split
HMM Multistage Split Case
Standards• CPS-Pumps
Operating Parameters• Flows to 5,300 GPM (1,203 m3/hr) • Heads to 1,250 FT (366 m)• Pressures to 541 PSI (37 bar)• Temperatures From 32°F (0°C) to 500°F (260°C)
Size Range• 5×6-12 (125/30) – 8×10-26 (200/66)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Marine & Offshore Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Cast iron casing/investment cast 304 stainless steel impellers• Fully removable rotor assembly• Hydraulically opposed impeller orientation• Investment cast 304 stainless steel, tongue & groove stage pieces• Bronze, impeller wear rings standard• Bronze, tongue & groove throat bushings standard• Bronze, tongue & groove fit, case wear rings offer superior pressure boundary protection• 400# suction/400# discharge flange drilled & tapped for easy connection to system piping• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Heavy duty, 304 stainless steel shaft sleeves with separate shaft sleeve nuts• Packing standard with optional component and/ or cartridge mechanical seals available• Standard ring oil lubrication with 360º circumferential cooling jackets• Modular, removable bearing housings• Standard bearing isolators• Double row inboard and duplex angular contact outboard bearing• 50,000+ hour minimum L10 bearing life standard
See HMM Product Bulletin
HMH Multistage Split Case
Standards• CPS-Pumps
Operating Parameters• Flows to 850 GPM (193 m3/hr) • Heads to 2,100 FT (640 m)• Pressures to 909 PSI (63 bar)• Temperatures From 32°F (0°C) to 500°F (260°C)
Size Range• 1.5×2.5-8 (38/20) – 4×5-10 (100/25)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Marine & Offshore Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Cast iron casing/investment cast 304 stainless steel impellers• Fully removable rotor assembly• Hydraulically opposed impeller orientation• Investment cast 304 stainless steel, tongue & groove stage pieces• Bronze, impeller wear rings standard• Bronze, tongue & groove throat bushings standard• Bronze, tongue & groove fit, case wear rings offer superior pressure boundary protection• 600# suction/600# raised face discharge flange drilled & tapped for easy connection to system piping• Drilled & tapped suction & discharge flanges for easy connection to system piping• Suction & discharge gauge connections standard• Turned, ground and polished 420 stainless steel shaft standard• Heavy duty, 304 stainless steel shaft sleeves with separate shaft sleeve nuts• Packing standard with optional component and/ or cartridge mechanical seals available• Standard ring oil lubrication with 360º circumferential cooling jackets• Modular, removable bearing housings• Standard bearing isolators• Double row inboard and duplex angular contact outboard bearing• 50,000+ hour minimum L10 bearing life standard
See HMH Product Bulletin
![Page 12: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/12.jpg)
www.cps-pumps.com CPS-Pumps Water Resources 02/15/2019 Revision 1A
12
Vertical Pumps
Solids Handling - N
on-Submersible
See VS-CNC Product Bulletin
VS-CNC Vertical Wet Pit Non-Clog
Standards• CPS-Pumps
Operating Parameters• Flows to 14,000 GPM (3,180 m3/hr) • Heads to 360 FT (110 m)• Pressures to 156 PSI (10.7 bar)• Temperatures From 32°F (0°C) to 300°F (149°C)
Size Range• 3×3-10 (80/26) – 14×14-26 (350/66)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Ductile iron casing (with clean-out port)/304 investment cast impeller• Two vane, enclosed, high efficiency impeller with large solids passing capability• Heavy duty, bronze, fluted inboard head bushing that can be supplied in a variety of optional materials• Back pump out vanes on front & rear of impeller for hydraulic balancing with rounded & tapered impeller inlet designed to pass limp, stringy solids• Recessed impeller lock nut to prevent rags and other debris from clogging eye of the impeller• Optional replaceable front wear plate• Column lengths to 33 feet (10m)• Separate, heavy-duty line-shaft bearing housings with fluted bronze bearing that can be supplied in a variety of optional materials• Heavy wall lineshaft bearings• Replaceable case wear ring standard• Turned, ground and polished 420 stainless steel shaft standard• Utilizes, stocked, standard C-Face motors 56C through 449TC brackets for coupling to drivers
![Page 13: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/13.jpg)
www.cps-pumps.comCPS-Pumps Water Resources 02/15/2019 Revision 1A
VS-CSG Vertical Process Sump
Standards• ASME (ANSI) B73.1M Fluid End• CPS-Pumps
Operating Parameters• Flows to 7,000 GPM (1,590 m3/hr) • Heads to 730 FT (223 m)• Pressures to 316 PSI (22 bar)• Temperatures From -40°F(-40°C) to 660°F (350°C)
Size Range• 1×1.5-6 (25/16) – 8×10-15 (200/38)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • High efficiency, semi-open impeller with broad band operating range• Impeller has back pump out vanes to keep seal chamber free of debris• Low flow impeller - Circular, concentric casing• Column lengths to 33 feet (10m)• Heavy duty, double row thrust bearing• Separate, heavy-duty line-shaft bearing housings with fluted bronze bearing that can be supplied in a variety of optional materials• Heavy wall lineshaft bearings• Replaceable case wear ring standard• Turned, ground and polished 420 stainless steel shaft standard• Utilizes, stocked, standard C-Face motors 56C through 449TC brackets for coupling to drivers
See VS-CSG Product Brochure
VS-CSD Vertical Process Sump
Standards• ASME (ANSI) B73.1M Fluid End• CPS-Pumps
Operating Parameters• Flows to 7,400 GPM (1,690 m3/hr) • Heads to 1000 FT (300 m)• Pressures to 450 PSI (30 bar)• Temperatures From -40°F(-40°C) to 660°F (350°C)
Size Range• 1×1.5-6 (26/16) – 8×10-16 (200/40)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Reverse vane impeller with broad band operating range• Low flow impeller - Circular, concentric casing• Column lengths to 33 feet (10m)• Heavy duty, double row thrust bearing• Separate, heavy-duty line-shaft bearing housings with fluted bronze bearing that can be supplied in a variety of optional materials• Heavy wall lineshaft bearings• Replaceable case wear ring standard• Turned, ground and polished 420 stainless steel shaft standard• Utilizes, stocked, standard C-Face motors 56C through 449TC brackets for coupling to drivers
See VS-CSG Product Brochure
VS-AQU Vertical Sump
See VS-CSG Product Brochure
13
Vertical Pumps
Vertical Sump
Standards• CPS-Pumps
Operating Parameters• Flows to 9,000 GPM (2,044 m3/hr) • Heads to 450 FT (140 m)• Pressures to 195 PSI (13 bar)• Temperatures From -40°F(-40°C) to 660°F (350°C)
Size Range• 1.25×2-5 (32/13) – 12×14-16 (300/40)
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Francis, enclosed, high efficiency impeller with broad band operating range• Cast iron casing/investment cast 304 stainless steel impeller• 125 pound suction flange and 125 pound discharge flange with both cast to 250 pound dimensions• Impeller has back pump out vanes to keep seal chamber free of debris• Column lengths to 33 feet (10m)• Heavy duty, double row thrust bearing• Separate, heavy-duty line-shaft bearing housings with fluted bronze bearing that can be supplied in a variety of optional materials• Heavy wall lineshaft bearings• Replaceable case wear ring standard• Turned, ground and polished 420 stainless steel shaft standard• Utilizes, stocked, standard C-Face motors 56C through 449TC brackets for coupling to drivers
![Page 14: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/14.jpg)
www.cps-pumps.com CPS-Pumps Water Resources 02/15/2019 Revision 1A
14
Vertical Pumps
Wet P
it - Radial, A
xial & M
ixed Flow
CVT OLS & ELS Turbine
See CVT Product Bulletin
Standards• CPS-Pumps
Operating Parameters• Flows to 35,000+ GPM (7,950+ m3/hr) • Heads to 2500+ FT (762 m)• Pressures to 1082 PSI (75 bar)• Bowl sizes from 6 inch (150 mm) to 42 inch (1100 mm)• Temperatures From -325°F (-200°C) to 660°F (350°C)
Size Range• 5” (125 mm) - 42” (1100 mm) Bowls
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Vitreous enamel, glass lined, cast iron bowl/ investment cast 304 stainless steel impeller• Flanged bowl connections for easy assembly & disassembly• Francis, enclosed or semi-open, high efficiency impeller with broad band operating range• Bronze bowl bearings standard with many other options available in cast iron, marine, metal or phenolic backed (bronze, rubber or stainless), carbon graphite, composite & grease packed• Unique “CCR” models that feature larger diameter shafts with extended bearing lengths for higher pressure and higher horsepower applications (8”, 10”, 12” & 14” sizes) as well as integral sand lugs to protect the bowl from abrasive wear• Suction case with suction bell as an option (suction bell standard 16” and larger)• Optional basket or conical strainers• Optional bowl & impeller wear rings• O-ring bowl connection standard through 16” diameter• Open or enclosed lineshaft options• Threaded or flanged lineshaft options• Threaded or flanged column assemblies• Cast iron, high ring base discharge heads (4”, 6”, 8”, 10”, 12”, 14” & 16”)• Specially designed “Deepset” heads are also available (8”, 10” & 12”)• Optional fabricated discharge heads
See CAF Product Bulletin
CMF Mixed Flow
Standards• CPS-Pumps
Operating Parameters• Flows to 40,000 GPM (11,350 m3/hr) • Heads to 150+ FT (31+ m)• Pressures to 65 PSI (4.47 bar)• Bowl sizes from 8 inch (200 mm) to 30 inch (750 mm)• Temperatures From 32°F (0°C) to 200°F (92°C)
Size Range• 8” (200 mm) - 30” (760 mm) Bowls
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Cast iron bowl/bronze impeller• Flanged bowl connections for easy assembly & disassembly• Francis, mixed-flow, high efficiency impeller with broad band efficiency• Bronze bowl bearings standard with many other options available cast iron, marine, metal or phenolic backed (bronze, rubber or stainless), carbon graphite, composite & grease packed• Suction bell standard• Optional basket or conical strainers • Optional bowl liner• Open or enclosed lineshaft options• Threaded or flanged lineshaft options• Threaded or flanged column assemblies• Cast iron, high ring base discharge heads (4”, 6”, 8”, 10”, 12”, 14” & 16”)• Optional fabricated discharge heads • Fabricated motor stands available for below base discharge applications• Packing, mechanical seal and tension tube assembly options available
See CMF Product Bulletin
CAF Axial Flow
Standards• CPS-Pumps
Operating Parameters• Flows to 80,000 GPM (18,170 m3/hr) • Heads to 12 FT (4 m)• Pressures to 5 PSI (0.36 bar)• Bowl sizes from 8 inch (200 mm) to 42 inch (1,100 mm)• Temperatures From 32°F (0°C) to 200°F (92°C)
Size Range• 8” (200 mm) - 42” (1100 mm) Bowls
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Cast iron bowl/investment cast 304 stainless steel impeller• Flanged bowl connections for easy assembly & disassembly• Francis, axial-flow, high efficiency impeller with broad band efficiency• Bronze bowl bearings standard with many other options available in cast iron, marine, metal or phenolic backed (bronze, rubber or stainless), carbon graphite, composite & grease packed• Suction bell standard• Optional basket or conical strainers• Open or enclosed lineshaft options• Threaded or flanged lineshaft options• Threaded or flanged column assemblies• Cast iron, high ring base discharge heads (4”, 6”, 8”, 10”, 12”, 14” & 16”)• Optional fabricated discharge heads• Fabricated motor stands available for below base discharge applications• Packing, mechanical seal and tension tube assembly options available
![Page 15: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/15.jpg)
www.cps-pumps.comCPS-Pumps Water Resources 02/15/2019 Revision 1A
15
Vertical Pumps
Wet P
it - Submersible
CST Submersible Turbine
Standards• CPS-Pumps
Operating Parameters• Flows to 2,200 GPM (500 m3/hr) • Heads to 2500+ FT (762 m)• Pressures to 1082 PSI (75 bar)• Bowl sizes from 6 inch (150 mm) to 15 inch (380 mm)• Settings to 2000 feet (610 m)
Size Range• 5” (125 mm) - 11+” (280+ mm) Bowls
Markets• Aerospace, Build Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Semiconductor Water Resources
Features • Vitreous enamel, glass lined, cast iron bowl/ investment cast 304 stainless steel impeller• Flanged bowl connections for easy assembly & disassembly• Francis, enclosed, high efficiency impeller with broad band efficiency• Bronze bowl bearings standard with many other options available in cast iron, marine, metal or phenolic backed (bronze, rubber or stainless), carbon graphite, composite & grease packed• Optional bowl & impeller wear rings• O-ring bowl connection standard through 16” diameter• Threaded & flanged discharge case options• Fabricated discharge elbows available in 90º orientation (150#, 300#, 600# & 900# ratings)• Unique motor bracket design that has flow path above motor bracket bearing keeping contaminants out of the shaft bore• Couples to standard NEMA splined motor
See CST Product Bulletin
![Page 16: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/16.jpg)
www.cps-pumps.com CPS-Pumps Water Resources 02/15/2019 Revision 1A
Horizontal Pum
psH
orizontal Turbine
16
HMT Horizontal Turbine
Standards• CPS-Pumps
Operating Parameters• Flows to 35,000 GPM (7,950 m³/hr) • Heads to 2500+ Feet (762+ m)• Pressures to 1083 PSI (74.6 bar)• Temperatures From 32°F (0°C) to 400ºF (204ºC)
Size Range• 5" (125 mm) – 42" (1100 mm) Bowls
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Vitreous enamel, glass lined, cast iron bowl/investment cast 304 stainless steel impeller• Flanged bowl connections for easy assembly & disassembly• Francis, enclosed, high efficiency impeller with broad band operating range• Bronze bowl bearings standard with many other options available (cast iron, marine, metal or phenolic backed (bronze, rubber or stainless), carbon graphite, composite & grease packed)• Optional bowl & impeller wear rings• O-ring bowl connection standard through 16" diameter• Threaded or flanged shafting options (1045, 416 stainless steel, 316 stainless steel, Nitronic 50, 17-4PH stainless)• Heavy duty ASTM A536 ductile iron, suction heads (4", 6", 8", 10", 12", 14" & 16")• Fabricated discharge flanges available in a variety of pressure ratings (150#, 300#, 600# & 900# ratings)• Packing, component & cartridge mechanical seal options available• Standard ring oil bearing lubrication with 360º circumferential cooling jacket• Duplex angular contact outboard bearing• 50,000+ hour minimum L10 bearing life standard
See HMT Product Bulletin
![Page 17: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/17.jpg)
www.cps-pumps.comCPS-Pumps Water Resources 02/15/2019 Revision 1A
17
Specialty Pumps
Vertical Diffuser/Self-Prim
er Diaphragm
SPD Self Priming Diaphragm
Standards• CPS-Pumps
Operating Parameters• Flows to 240 GPM (1136 m3/hr) • Heads to 60 FT (18 m)• Pressures to 26 PSI (2 bar)• Temperatures From 32°F (0°C) to 120°F (49°C)
Size Range• 3×3 (80/80) – 4×4 (100/100)
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Suction lift to 24 feet• The entire fluid assembly can run dry indefinitely• High resistance to abrasion• Large solids passing capability• Many driver options (electric, gasoline & diesel)• Integral 30:1 gear reduction housing to ensure proper pump operation• Oil lubricated powertrain components• Pump can be supplier on a fabricated steel base, handcart or a high speed trailer• Optional pulsation damper• Many driver options (electric, gasoline, diesel)
See SPD Product Bulletin
VMS Vertical Multistage Diffuser
Standards• CPS-Pumps
Operating Parameters• Flows to 1,050 GPM (240 m³/hr) • Heads to 995 Feet (303 m)• Pressures to 26 PSI (2 bar)• Temperatures From 32°F (0°C) to 350ºF (177ºC)
Size Range• 1×1 (25/25) – 6×6 (150/150
Markets• Building Trades, Chemical Processing, Food & Beverage, General Industry, Irrigation & Agriculture, Marine & Offshore, Mining & Aggregate, Power Generation, Oil & Gas, Pharmaceutical, Pulp & Paper, Water Resources
Features • Cast Iron base & motor stand/stamped 304 stainless steel impeller• Available with cast iron or 316 stainless steel top/ bottom brackets• Cartridge Carbon/Silicone-Carbide/Viton mechanical seal standard• External port for dry running monitoring• Radial, enclosed, high efficiency impeller with broad operating range• 250# suction/250# discharge flange standard• Optional oval, grooved or DIN flanges available• Easily removable motor coupling for easy motor replacement• NEMA or IEC motor options
See VMS Product Bulletin
![Page 18: Water Resources - CPS-Pumpscps-pumps.com/wordpress/wp-content/uploads/2019/06/Water-Resources.pdf · World Class Centrifugal Pump Manufacturer CPS-Pumps is a 30+ year old, world leading,](https://reader034.fdocuments.in/reader034/viewer/2022042202/5ea23684dab05475232b873b/html5/thumbnails/18.jpg)
CPS-Pumps 125 Morrison DriveRossville, TN 38066Phone: (901) 850-5115Fax: (901) 850-5119www.cps-pumps.com
www.cps-pumps.com