WATER PURIFICATION SYSTEMSvides service of water purification systems for laboratory purposes....

W A T E R P U R I F I C A T I O N S Y S T E M S

W a t e r s o u r c e i n y o u r l a b o r a t o r y

w w w . h y d r o l a b . p l

Hydrolab is a company that designs, produces and pro-vides service of water purification systems for laboratory purposes.

Hydrolab is a leader on the Polish market in water puri-fication systems production. For 20 years Hydrolab has been introducing and implementing newest technologies of water purification by mechanical filtration, adsorption, iron removal, softening, membrane technologies (reverse osmosis, microfiltration, nanofiltration, ultrafiltration), as well as usage of 185nm and 254nm UV radiation and de-ionization.

In our offer we have more than a hundred models of wa-ter purification systems. On the basis of our experience and research, we designed and developed three series of demineralizers: TECHNICAL, HLP and SPRING, as an ideal solution fitting all of the requirements of a modern labo-ratory in areas of ultrapure water supply. We also made a variety of unique and innovative solutions, that extend our standard offer. These are: BASIC, POLISHING, R, PLUS and industrial systems: SPRING and TECHNICAL.

Demineralizers may be used in analytical laboratories, as well as dental operating rooms, beauty salons, and indu-stries: electronic, food, chemical, pharmaceutical etc. Hydrolab offers complex services of supplying laborato-ries with the highest quality water, giving advices in mat-ters of a demineralized water supply - providing support from planning to installation (with a full IQ, OQ, PQ docu-mentation).

The company has implemented the PN-EN ISO 9001:2009 quality management certificate in areas of design, pro-duction and service of water purification systems, which guarantees a high quality of our products and services.

ABOUT US

5

Clean water is the most important chemical reagent in a laboratory. Hydrolab offers systems producing water fit-ting the parameters of every water purity class, specified in PN-EN ISO 3696:1999, ASTM, CLSI, FP IX standards.

Ater quality in a modern laboratory, depending of a usa-ge purpose, should remain unchanged and proper, and its parameters (for example conductivity and temperature) should be constantly monitored. Basic standard of wa-ter quality in force in Poland are PN-EN ISO 3696:1999 for analytical laboratories, and Farmakopea Polska IX for pharmaceutical. The PN-EN ISO 3696:1999 standard de-scribes three classes of water purity:

Class 1Water without diluted contamination (colloidal ionic or or-ganic), fitting the strictest analytical requirements, inclu-ding a high-performance liquid chromatography. It is ad-vised to obtain it from second purity class water, treating it with further processes (for example reverse osmosis or deionization, and then filtering through 0,2μm membrane for substance removal, or double distillation in a quartz apparatus).

Class 2Water with very low non-organic, organic and colloidal con-tamination. Should be obtained by a distillation, or a di-stillation forwarded by a deionization or a reverse osmosis.

Class 3Water for general purposes, used for „wet” chemical ta-sks. Obtained by a single distillation, a deionization or a reverse osmosis.

WATER

7

Mechanical filtrationMechanical filtration is a basic and necessary method of water purification for most of our devices. It prepares the tap water for a softening process, an iron removal, a re-verse osmosis and a UV lamp radiation. Its efficiency de-pends on a sediment module type, to the quality of demi-neralized water. It is made of a netted, stringed or foamed polypropylene cartridge and a housing. It holds all sort of mechanical contamination, such as sand, mud, stain of a grain size from 100 μm to 1μm. A sediment’s module life-time depends on contamination type and varies between 3 and 6 months. Activated carbon filtrationContaminations existing in tap water are sorbed on an activated carbon. Hydrolab’s carbon modules prepare the tap water for further stages of purifcation process. They have a granulated or compressed activated carbon of 500-1000 nm permeability and a 1000 m2/g area. They indicate adsorption properties and remove chlorium, its derivatives and organic contamination extremely well, protecting the osmotic module. Large surface and per-meability, as well as material bound by it, make a good environment for microorganisms. Activated carbon filters should be regularly replaced for minimizing the bacteria accumulation. With 0,3 - 0,4 mg/dm3 chlorium concen-tration, a twice a year replacement should be sufficient. SofteningWater preparation for a reverse osmosis process, removes calcium and magnesium ions from water. Iron removalWater preparation for a reverse osmosis process, removes iron ions from water. Reverse osmosis module - ROAn RO membrane holds up to 96-99% of diluted organic and non-organic contamination. Osmotic water conducti-vity varies between a few to several μS/cm. Retention level (96-99%) depends on salinity, temperature, pressure and flow speed of tap water. A semi-permeable osmotic mem-brane consists of many layers wrapped on a perforated central tube situated inside the membrane. Contaminated water is pumped under pressure on the membrane’s sur-face, where water molecules by diffusion flow through the membrane. Contaminations are extracted, purified water flows through the central tube and under pressure exits the membrane.

Demineralization on an ionex resinDeionization modules contain ionex resins in an ion H+/OHˉ form. Osmotic water is purified on deionization co-lumns, where remaining mineral salts are captured. In an ion exchange process, existing ions and molecules in wa-ter, having a particular charge, are bound by ionites. After this process, the conductivity decreases to 0,055 μS/cm. UV lamp 254nmUV lamp radiation is used for disinfection. These devi-ces emit a radiation of a 254nm wave length, initiating a photochemical reaction damaging DNA structures of mi-croorganisms existing in water. This radiation causes an irreversible deactivation of bacteria, viruses, mold, fungus and other organisms. UV lamp consists of a radiation tube with a UV radiator, protected by a quartz housing, moun-ted inside. 8500h lifetime. UV lamp 185/254This device emits radiation of a 185 and 254nm wave length, damaging DNA structures and reducing TOC. 8500h lifetime. UltrafiltrationUltrafiltration is a low-pressure process of separation, using asymmetrical permeable membranes, of a 1-10μm radius, letting water, salts and saccharides flow through it, separating them from proteins and larger molecules. Reduces endotoxins extremely well. Microfiltration 0,2 μm (capsule)Microfiltration capsule is a ready-to-use flow filter inten-ded for sterilizing water. Made of a polypropylene housing and a double-layer membrane (cellulose acetate or poly-etherosulfone) with a 0,2 μm and 0,45 μm pore size. Wor-king surface is the pore amount equal to bacteria retained on a specific membrane area. It is 1 x 107 CFU/cm2 for the Brevundimonas diminuta.

TECHNOLOGY

6

The TECHNICAL demineralizers are widely used water purifica-tion systems fed by tap water, and retain 96-99% of dissolved organic and non-organic contamination, heavy metals and ra-dioactive elements. Fully automated and unattended, equipped with a control and measurement system, monitoring all the stages of the water purification process. Obtained water mat-ches the PN-EN ISO 3696:1999, ASTM, CLSI standards for third class water quality.

Perfect for washers, analyzers, autoclaves, environmental chambers, water baths, HLP demineralizers, as well as, through developing a proper network, supplying several laboratory ro-oms and floors.

Standard:Water purified in this device fits the PN-EN ISO 3696:1999 standard for III purity class.

Application:Obtained water is used for preparation of mediums, reagents, buffer solutions; can be used as a source for other laboratory devices – washers, analyzers, autoclaves, environmental cham-bers, cleaning systems.

* device equipped with a UV lamp

SERIESTECHNICAL

9

• Equipped with a pump (increasing the feed water pressure) with automatics.• Retention level: 97-99%• Maximum filtrate pressure - 3 bar (45 psi).• Unattended and automated• Equipped with a nozzle with a minimum range of 2 meters.• Optional tank installation.• Automatic system shutdown when the tank is full or the filtrate valve is closed.• Optional connection to a washer, an autoclave etc.• May be used for making a demi water network with seve-

ral water intake points.• Maintenance procedures may be performed by the user (easy disposables replacement).• Energy consumption: 0,55 kW.• Optional installation of a UV sterilizer.• Can be installed by the user.• Power supply: 230V/50Hz. Functions monitoring the device:• The device is equipped with a 24V automatics with a

microprocessor control and measurement system, that includes:

• color display screen with a Touch Panel• conductometer measuring conductivity and temperature of feed and purified water (measured in µS/cm or MOhm),• clock displaying date and time,• information about current system status,• information about the membrane module retention level,• alarm informing about necessity to replace the mechani-

cal and/or activated carbon filter,• graphic and sound alarm signal,• maintenance dates preview,• tank fill level,• built-in RS 232 connection to personal computers allowing to adjust maintenance frequency and alarm levels• built-in USB connection to personal computers allowing

to adjust maintenance frequency and alarm levels• Software.• Manometer measuring feed water pressure. Functions protecting the device:• Pump shutdown when:• the feed water pressure is too low (lack of feed water) -

low pressure sensor,• the tank is full - high pressure sensor.• Thermal protection of the RO module, automated sys-

tem shutdown when the feed water temperature is be-low 4˚C or above 40˚C.

• Can be automatically shut down when any alarm occurs.• System autostart.• Notification/alarm preview. Dimensions(width x depth x height): 200x510x610mm Feed water parameters:Conductivity < 1200 µS/cmPressure > 0,35 MPa Temperature: 5-40 0CHardness < 250 mg CaCO3/dm3Fe < 0,2 mg/dm3 Required connections:• cold tap water connection ½” lub ¾”• 230V socket• Drain

General informationFed by: tap waterEfficiency: 5 l/hWater intake speed: 1-2 I/minRetention level > 97-99%TOC < 50ppbBacteria < 1cfu/ml *

StandardPurity classDemineralized water fits the PN-EN ISO 3696:1999 stan-dard for a third class of water purity.

Usagemay be used for mediums, buffer solutions, reagents. Can supply other laboratory devices: washers, analyzers, au-toclaves, polishing systems etc.*Device equipped with a UV lamp

Technical specification:• Works under tap water pressure.• Water purification process levels:• sediment filtration,• activated carbon filtration,• reverse osmosis.• System efficiency: 5 dm3/h (daily: 1200 dm3).

Models Efficiency l/h Dimensions mm Catalogue no.

Technical 5 5 230x400x510 DT-0005-0CTechnical 10 10 230x450x580 DT-0010-0CTechnical 15 15 230x450x580 DT-0015-0CTechnical 25 25 230x450x580 DT-0025-0CTechnical 40 40 260x470x650 DT-0040-0CTechnical 60 60 260x470x650 DT-0060-0C

MODELS

* the amount of purified water depends on the quality of tap water

8

HLP demineralizers are fed by tap water and match require-ments of an every modern laboratory, in areas of supplying with purified water for instrumental and analytical purposes. Con-ductivity of obtained water does not exceed 0.055 µS/cm, so it is applicable for PN-EN ISO 3696:1999, ASTM, CLSI, FP IX stan-dards. Water may also be used for AAS, ICP/MS, IC, HPLC, GC instrumental analyses. In addition, our demineralizers are equ-ipped with a microprocessor control and measurement system.

SERIESHLP

*the amount of purified water depends on the quality of tap water

11

General informationSupply: tap waterEfficiency: 10 dm3/hPurified water intake speed: 1-2 I/minConductivity < 0,06 µS/cmNa+, SO42-, Cl-, Br-, N02-, NO3-, P043- < 0.5 ppb Fe, Zn, Cu, Cr, Mn < 0.1 ppbTOC < 30ppbBacteria < 1cfu/ml *Particles > 0,2μm < 1/ml*

Standard:Water purified in this device fits the PN-EN ISO 3696:1999 standard for I*, II, III purity class, and microbiological/physicochemical FP IX requirements for purified produc-tion water*.

Application:Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC*, GC*, bacteria cultures*, bioche-mical analyses*

* device equipped with a UV lamp and a microfiltration capsule 0,22 μm

Technical specificationTechnical specification:Device operates under tap water pressureWater purification levels:- sediment filtration (two levels)- carbon filtration- reverse osmosis- initial ion exchange demineralization (main column)- UV lamp – 254 nm (model: HLPUV)- microfiltration cascade capsule 0,45/0,22 μm (models: HLPs, HLPsp, HLPUV)

Automatic and unattended system operation Mobile intake point of water. System equipped with a 10dm3 pressure storage tank. Optional tank replacement with a larger one User-performed maintenance procedu-res (easy disposables replacement).UV lamp lifetime – 8500 hours (model: HLPUV)Maximum operating pressure: 1 MPaIntended to be fed by cold water: 5-40°C

10

Models Efficiency l/h Dimensions in mm Standard PN-EN 3696:1999 Catalogue no.

Smart 4 200x360x420 II class DH-0004-00

Models Microfiltration Pump increasing Lamp Standard Catalogue no. 0,2 μm pressure 254 nm PN-EN 3696:1999

HLP 5 - - - II class DH-0005-00 HLP 5s + - - I class DH-0005-0S HLP 5p - + - II class DH-0005-0P HLP 5sp + + - I class DH-0005-SP HLP 5UV + + + I class DH-0005-UV







SPRING demineralizers are devices fed by tap water, with extended equipment and advanced automatics. Similar to HLP series, SPRING systems produce water of 0,055 μS/cm conductivity, matching the requirements of stan-dards: PN-EN ISO 3696:1999, ASTM, CLSI, FP IX. These devices are intended for more demanding users, equipped with advanced automatics, that monitors the disposables usage, archiving data, allowing personalization of alarm levels for feed water, after reverse osmosis treatment and ultrapure, membrane rinsing, ultrapure water recircu-lation, and work with several adjutages simultaneously. Our devices also contain protection functions, that ensure that the system work is easy and comfortable.

In Spring systems, the demineralization process on ion exchange resins is based on the SQF system (Slow Qu-ick Flow), a new hydraulic solution allowing the filtrate recirculation, keeping the double demineralization. SQF results in a more efficient final demineralization by exten-ded contact of a filtrate with the resin, while keeping a high product emission rate.

Disposable modules count in SPRING systems is reduced to two: A (initial filtration) and B (cleaning column opera-ting in the SQF system), connected by quick connectors, so the replacement procedure may be performed easily by the user.

SERIESSPRING

13

General information: • fed by: tap water• efficiency: 5-60 l/h• purified water dosage speed 1-2 l/min• conductivity < 0,06 μS/cm• Na+, SO42-, Cl-, Br-, N02-, NO3-, P043- < 0,5 ppb• Fe, Zn, Cu, Cr, Mn < 0.1 ppb• TOC < 5 ppb• TOC < 3 ppb*• bacteria < 1 cfu/ml• particles > 0,2 μm < 1/ml• endotoxins < 0,001 EU/ml*• RNases < 0,01 ng/ml*• DNases < 4 pg/μl*

Standard:Water purified in this device fits the PN-EN ISO 3696:1999 standard for I*, II, III purity class, and microbiological/physicochemical FP IX requirements for purified produc-tion water*.

Application:Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC*, GC*, bacteria cultures*, bioche-mical analyses*, molecular biology**

* device equipped with a UV lamp and a microfiltration capsule 0,22 μm** device equipped with an ultrafiltration module UF

Technical specification:• Device operates under tap water pressure• Water purification levels:- sediment filtration (two levels) - carbon filtration - reverse osmosis - ion exchange demineralization (SQF system) - UV lamp: 185/254 nm or 254 nm (optional) - ultrafiltration module (optional) - microfiltration capsule 0,45/0,2μm (optional)• Automatic and unattended system operation • System equipped with a 24V pump increasing feed water

pressure, with an automatics.• Water intake point – purity class according to PN-EN ISO

3696:1999 equipped with a demi water nozzle of a min. 2 m reach

• System equipped with a 10dm3 pressure storage tank• Optional connection to a washer, an autoclave, an ana-

lyser etc.• Optional installation of a UV sterilizer• Maximum operating pressure: 1 MPa• User-performed maintenance procedures (easy disposa-

bles replacement)• Intended to be fed by cold water: 5-40°C• Automatic membrane module rinsing• Energy consumption less than 25W• Energy consumption 50W (model: UV)• Power supply: 230V/50Hz• Optional user-performed device installation

Models Efficiency in l/h Dimensions in mm Catalogue no.

Spring 5 5 230x510x610 DS-0005-0C Spring 10 10 230x510x610 DS-0010-0C Spring 15 15 230x510x610 DS-0015-0C Spring 25 25 230x510x610 DS-0025-0C Spring 40 40 230x510x610 DS-0040-0C Spring 60 60 230x510x610 DS-0060-0C

MODELS

12

Devices providing ultrapure water, that fits the PN-EN ISO 3696:1999 standard for first purity class.

System is fed by an external source of initially purified water that fits the requirements of II or III purity class, according to PN-EN ISO 3696:1999.

Cleaning module is a fully automated and unattended system, equipped by default with an automatic diagnostic apparatus.

Water purification levels: demineralization and recircu-lation on a mixed ion exchange resin (TOC), UV lamp – 185/254nm, ultrafiltration, microfiltration (0,45/0,22 μm capsule).

SERIESULTRA

15

General information:• fed by: tap water• efficiency: 5-25 l/h• purified water dosage speed 1-2 l/min• conductivity < 0,055 μS/cm• Na+, SO42-, Cl-, Br-, N02-, NO3-, P043- < 0,5 ppb• Fe, Zn, Cu, Cr, Mn < 0.1 ppb• TOC < 5 ppb• TOC < 3 ppb*• bacteria < 1 cfu/ml• particles > 0,2 μm < 1/ml• endotoxins < 0,001 EU/ml*• RNases < 0,01 ng/ml*• DNases < 4 pg/μl*

Standard:Water purified in this device fits the PN-EN ISO 3696:1999 standard for I purity class, and microbiological/physico-chemical FP IX requirements for purified production water*.

Application:Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses, molecular biology** device equipped with an ultrafiltration module UF and a photooxidation module 185/254 nm

Technical specification:System intended to be fed by purified water of II or III pu-rity class, according to N-ENISO 3696:1999• Water purification levels: - demineralization on a spectrally clean mixed ion

exchange TOC resin - UV lamp: 185/254 nm - ultrafiltration module - cascade microfiltration capsule 0,45/0,2μm• Automatic and unattended system operation • System equipped with a recirculation pump• Mobile intake point of water – first purity class according

to PN-EN ISO 3696:1999, equipped with a microfiltration capsule 0,45/0,2 μm

• Recurring, automatic purified water recirculation between water intakes

• Automatic system shutdown if full recirculation• Maximum operating pressure: 0,3 MPa• User-performed maintenance procedures (easy disposa-

bles replacement)• Intended to be fed by cold water: 5-40°C• Energy consumption less than 50W• Optional user-performed device installation• Power supply: 230V/50Hz

TOC – device equipped with a basic ion exchange TOC mo-dule and a microfiltration capsule (0,45/0,2 μm) in the recirculation loop

TOC/UV – device equipped with a basic ion exchange TOC module, photooxidation UV module (185/254 nm) and a microfiltration capsule in the recirculation loop 0,45/0,2 μm (available lamps: 185 nm and 254 nm)

TOC/UF – device equipped with a basic ion exchange TOC module, ultrafiltration module, and a microfiltration cap-sule (0,45/0,2 μm) in the recirculation loop

TOC/UV/UF – device equipped with a basic ion exchan-ge TOC module, ultrafiltration module, photooxidation UV module (185/254 nm) and a microfiltration capsule (0,45/0,2 μm) in the recirculation loop

Models Microfiltration Cleaning ionite UV lamp Ultrafiltration Catalogue no. 0,2 μm TOC 185/254 nm module

TOC + + - - DR-TOC-00 TOC/UV + + + - DR-TOC-UV TOC/UF + + - + DR-TOC-UF TOC/UV/UF + + + + DR-TOC-UV-UF

Catalogue no. EM-SB-21 EJ-2000-1 EUV-185-254 EU-ST-01

MODELS

MODELS

14

R demineralizers are devices that combine features of two series: Spring and Cleaning into one system, optimizing investment costs by reduction of shared construction are-as. These devices produce ultrapure water fitting the FP IX and PN-EN ISO 3696:1999 standard for first purity class. They are also equipped with an extended automatics, that allows the user to monitor disposables performance, data archiving, individual adjustment of alarm levels for feed water parameters, water after reverse osmosis, and ul-trapure, along with controlling the function of automatic membrane modules rinsing. These systems also have a set of protections for comfortable system operation.

SERIESR

17

General information:• fed by: II, III purity class water (PN-EN ISO 3696:1999)• purified water dosage speed 1-3 l/min• conductivity < 0,055 μS/cm• Na+, SO42-, Cl-, Br-, N02-, NO3-, P043- < 0,5 ppb• Fe, Zn, Cu, Cr, Mn < 0.1 ppb• TOC < 5 ppb• TOC < 3 ppb*• bacteria < 1 cfu/ml• particles > 0,2 μm < 1/ml• endotoxins < 0,001 EU/ml*• RNases < 0,01 ng/ml*• DNases < 4 pg/μl*

Standard:Water purified in this device fits the PN-EN ISO 3696:1999 standard for I purity class, and microbiological/physico-chemical FP IX requirements for purified production water.

Application:Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses, molecular biology*

* device equipped with an ultrafiltration module UF and a photooxidation module 185/254 nm

Technical specification:Device operates under tap water pressureWater purification levels: - sediment filtration - carbon filtration - reverse osmosis - ion exchange demineralization (TOC) - UV lamp: 185/254 nm or 254 nm - ultrafiltration module UF - microfiltration capsule 0,45/0,2μm

• Automatic and unattended system operation • System equipped with a recirculation pump• Mobile intake point of water – first purity class according

to PN-EN ISO 3696:1999,equipped with a microfiltration capsule 0,45/0,2 μm

• Optional installation of an additional water intake point for general laboratory purposes – III purity class, accor-ding to PN-EN ISO 3696:1999

• Recurring, automatic purified water recirculation between water intakes

• System equipped with a 10dm3 pressure storage tank• Automatic system shutdown when a tank is full• Maximum working pressure: 1 MPa• User-performed maintenance procedures (easy disposa-

bles replacement)• Intended to be fed by cold water: 5-40°C• Automatic membrane module rinsing• Energy consumption: 50W• Optional user-performed device installation• Power supply: 230V/50Hz

Models:

serie R - device equipped with a basic ion exchange TOC module in its recirtulation loop, and a microfiltration capsule 0,45/0,2 μm. CATALOGUE NO. DR-TOC-00

serie R UV - device equipped with a basic ion exchange TOC module in its recirculation loop, a photooxidation UV module 185/254 nm, and a microfiltration capsule 0,45/0,2 μm. (available lamp options: 185 nm and 254 nm). CATALOGUE NO. DR-TOC-UV

serie R UF - device equipped with a basic ion exchange TOC module in its recirtulation loop, a photooxidation UV module 185/254 m, and a microfiltration capsule 0,45/0,2 μm. CATALOGUE NO. DR-TOC-UF

serie R UV UF - device equipped with a basic ion exchange TOC module in its recirtulation loop, a photooxida-tion UV module 185/254 m, an ultrafiltration module, and a microfiltration capsule 0,45/0,2 μm (available lamp options: 185 nm and 254 nm). CATALOGUE NO. DR-TOC-UV-UF

16

19

BASIC deionizers are devices of a high demineralized wa-ter production efficiency. The quality of obtained water (depends on the tap water flow intensity) varies between 0.2-0.8 µS/cm. Fully automated and unattended devices are equipped with a microprocessor control and measu-rement system, which constantly monitors the water pa-rameters. Purified water fits the PN-EN ISO 3696:1999, ASTM, CLSI standards for second class. BASIC deionizers are a perfect source of high quality water for washers, analyzers, autoclaves etc.

SERIESBASIC

Standard:Water purified in this device fits the PN-EN ISO 3696:1999 standard for II, III purity class.

Application:Basic water for general laboratory purposes; for instrumen-tal analyses AAS, ICP/MS; obtained water may be used for preparations of mediums, buffer solutions, reagents; may be used as a source for other laboratoru devices: washers, analysers, autoclaves, environmental chambers, cleaning demineralizers

Technical specification:• Device operates under tap water pressure• Water purification levels: - sediment filtration - ion exchange filtration• Conductivity of obtained water (dependable on tap water

flow): 0,1 - 5 μS/cm• Water intake point – II purity class, according to PN-EN

ISO 3696:1999, equipped with a demi water nozzle of a min. 2 m reach

• User-performed maintenance procedures (easy disposa-bles replacement)

• Can be connected to an autoclave, a washer, a climate chamber etc.

• Power supply: 230V/50Hz• Optional user-performed device installation• Monitoring message/alarm preview

Models Flow intensity [L/h] Bed volume l Catalogue no.

Basic 2 20-40 2 DB-002-0K Basic 5 50-100 5 DB-005-0K Basic 10 100-200 10 DB-010-0K Basic 15 150-300 15 DB-015-0K Basic 25 250-500 25 DB-025-0K

MODELS

18

INDUSTRIAL SYSTEMS – SPRING/TECHNICAL demineralizers, of an industrial efficiency of between 100 and 1000 dm3/h, allow to obtain water of a high pureness, matching the standards of PN-EN ISO 3696:1999, ASTM, CLSI and FP IX.

These demineralizers may be used in an industry (pharmaceu-tical, food, cosmetics, electronics, etc.) as a central unit produ-cing demineralized water, distributed through a network, feeding multiple labratory rooms, floors or particular devices.

DesignDesign, production, service of laboratory water purification systems.

INDUSTRIALSYSTEMS

SPRING

TECHNICAL

Models Efficiency l/h Catalogue no.

SPRING 100 100 DS-0100-0C SPRING 150 150 DS-0150-0C SPRING 200 200 DS-0200-0C SPRING 300 300 DS-0300-0C SPRING 400 400 DS-0400-0C SPRING 600 600 DS-0600-0C

Models Efficiency l/h Catalogue no.

TECHNICAL 100 100 DT-0100-0C TECHNICAL 150 150 DT-0150-0C TECHNICAL 200 200 DT-0200-0C TECHNICAL 300 300 DT-0300-0C TECHNICAL 400 400 DT-0400-0C TECHNICAL 600 600 DT-0600-0C

21

Plus series stations are devices used in tap water softening, preparing it for further treatment by our HLP, Technical, Spring demineralizers. They remove ions of calcium and magnesium from water.

A resin is treated by cyclic regenerations, so it can be repleni-shed to it’s initial performance of water softening – the system is able to operate over many years.

ModelsPlus T – time station – resin regeneration is fully automated, performed every defined time.

Plus V – volume station - resin regeneration is fully automated, performed every defined volume.

Technical specification:Fed by tap water

Initial water purification:• efficient 5 μm sediment filter (10” height in a housing with deaeration)• ion exchange resin – strong acid cationite• compact construction – ionite column situated inside a salt housing• high efficiency in hardness ion removal• resistant to corrosion tank made of glassfiber• automated rinsing and resin regeneration• modern controlling head• temporal resin regeneration

SERIES PLUS

Models flow intensity [l/h] dimensions in mm Catalogue no.

Plus T 10 1000 350x420x540 DP-010-0T Plus T 20 1800 390x460x960 DP-020-0T Plus V 10 1000 350x420x540 DP-010-0V Plus V 20 1800 390x460x960 DP-020-0V

MODELS

20

47

Hydrolab’s water purification devices are fed by tap water of a different quality. By several protec-tion methods and process stages, we are able to provide the highest quality water for laboratory purposes. All of the stages are controlled, monitored and archived, so the service is effective, and its costs - optimized.

Correct system performance relies on a regular service and maintenance, as well as good communi-cation between the user and an authorized service point. SERVICEStandard replacement of disposables is performed by the user. Hydrolab’s devices inform the user, when the disposables will expire. The replacement may be performed manually by the user, and the materials are delivered within 24 hours after a request.

Service contractService contract ensures the User that the device inspection will be performed regularly on a plan-ned time, guaranteeing a stable and efficient system work.We also extend the warranty and provide extra discounts. Periodic inspectionAll maintenance and service procedures can be planned individually with the user. Service callsOur service is able to react in a time that does not exceed 24 hours.Service procedures are adjusted individually to the user’s requirements and needs.We guarantee our service protection all over the country. Periodic inspectionInspection in the Hydrolab Service Department is time and cost effective.Hydrolab Service Department is responsible for the collection and delivery logistics.We provide a substitute system for the inspection time. ValidationsHydrolab’s service guarantees full range of qualification process: installation (IQ), operational (OQ) and process (PQ). It is documented and made by Hydrolab. Modernization and improvementThe user’s requirements may change over time. Thus, we are constantly improve current devices. We also design and build demi water network. Protection, monitoring, inspectionWe guarantee constant service protection during the warranty and post-warranty period, and full documentation (for example for an audit purpose).Each user has access to the Registration Card, made individually for every device made by Hydrolab, containing all necessary information (parameters, services, disposables deliveries, installations etc.)

S E R V I C E

22

Dziewięć Włók 27B83-021 Wiślina

tel. +48 58 341 16 69tel. +48 58 341 90 00fax +48 58 585 86 97

[email protected]@hydrolab.pl

ISO 9001:2009 Design, production and service of water purification systems for laboratory and industrial purposes

WATER PURIFICATION SYSTEMSvides service of water purification systems for laboratory purposes....

Documents

Transcript of WATER PURIFICATION SYSTEMSvides service of water purification systems for laboratory purposes....