Water level-indiator
-
Upload
ishtiaq-ahmad -
Category
Documents
-
view
53 -
download
1
Transcript of Water level-indiator
![Page 1: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/1.jpg)
GROUP MEMBERS Tanmoy Das (13-23395-1) ARIF ABUL AHSAN (13-23350-1) ALAM, S. M. NUR (13-23467-1)
Submitted TO======>
![Page 2: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/2.jpg)
![Page 3: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/3.jpg)
![Page 4: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/4.jpg)
Overflow ProblemsTo Prevent Wastage Of EnergyTo Prevent Wastage Of WaterAttentionObservationAutomatic Switch Off
![Page 5: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/5.jpg)
1.Bredboard (1 Pcs) 2.Bjt ---BC547 NPN ( 4 Pcs) 3.LED of different color (3 Pcs) 4.Resistence—220 ohm (6 Pcs) 5.Buzzer (1 Pcs) 6. Battery (9 V) (1 Pcs) 7. Connecting Wire 8.A Bowl 9.Water
![Page 6: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/6.jpg)
![Page 7: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/7.jpg)
![Page 8: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/8.jpg)
Here’s a SIMPLE WATER LEVEL INDICATOR CIRCUIT. It is best suited for overhead water tanks to display the amount of water. The circuit consisting of 3 LED’s used to indicate minimum, medium and maximum levels. It is possible to increase the count of indicator LED’s and make it more convenient. The circuit is powered by a 9V battery and it consumes only very less current.
![Page 9: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/9.jpg)
The circuit consisting of 5 sensing probes which is dipped in water to sense the level of water. The probe A is connected as common to other three, which should be at the bottom most part of the water tank, also it act as a reference level. The probes B, C,D, and E are set as minimum, middle and maximum level respectively. Assemble the circuit on a general purpose PCB and enclose it in a casing and mount it with the indicator LED’s pointing out of the box. A short length three, 18 SWG copper wires can be used as sensing probes and for common sensor Probe A, a bare copper wire can be used.
![Page 10: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/10.jpg)
When water in the tank touches the probe A and B both, a small current flows from A to B through water and to the base of transistor T1 via a 220Ω resistor. As a result the transistor conducts causing the LED1 to glow. Similarly, when water touches sensor C, LED2 glow and indicates that the tank is half-filled. Finally, when the water touches sensor D, LED3 glows and indicates the tank is completely filled
![Page 11: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/11.jpg)
![Page 12: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/12.jpg)
![Page 13: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/13.jpg)
Breadboard==250 Tk =============220 Led =====2 TK(per piece)====2*3===6 Bjt=====4 TK(per piece)====4*4====16 Battery (9V)====================40 Resistance=====================10 Buzzer========================20 Connecting Wire================10
Total============322
![Page 14: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/14.jpg)
Water level indicator is used in applications like storage,tanks,boilers e.t.c. to indicate level of water inside.
Easily indicate when water level is full in tank with beep Sound
It can be used to measure any liquid which are electricity sensative
No extra sensor need.Copper wire can be used as sensor.
To save energy To save water Low Cost
![Page 15: Water level-indiator](https://reader034.fdocuments.in/reader034/viewer/2022042512/55a69d201a28abef7d8b475a/html5/thumbnails/15.jpg)
Digital Fundamentals-Thomas L.Floyd(8th
Edition)www.electronicsforyou.comhttps://www.youtube.com/watch?v=uQj8GK
QgQxgwww.mycircuits9.com