Water & Energy Saving Solutions - Robert Pearson€¦ · Water & Energy Saving Solutions Product...
Transcript of Water & Energy Saving Solutions - Robert Pearson€¦ · Water & Energy Saving Solutions Product...
Robert Pearson & Company Ltd. Water & Energy Saving Solutions
Product Guide 2019/2020
Sensor Taps Sensor WC Flush
PIR Urinal Controls
Limescale ControlInline Water Flow Regulators
Anti Ligature
Sanitary Shut Off Valves Actuated ValvesPIR Switches
Neoperl Aerators & Flow Regs
www.robertpearson.co.uk Tel: 01985 850954
Remote Tap Sensors
Sensor Urinal Flushvalves
ContentsWater Saving Flow Regulators Pages 1–5
Water Saving Tap Aerators and Flow Regulators ......................................................... Pages 2-3 Water Saving Tap Tail Flow Regulators ............................................................................................ Page 4 Water Saving Shower Flow Regulators ............................................................................................. Page 4
Water Saving Inline Flow Regulators .................................................................................................................... Page 5
Automatic “No-Touch” Sensor Operated Taps Pages 6–7
Tap Spouts Page 8Black Tap Spouts .......................................................................................................................................................................... Page 8Chrome Tap Spouts .................................................................................................................................................................. Page 8Brushed Stainless Steel Tap Spouts ......................................................................................................................... Page 8
“No Touch” Sensor Kits for your Tap Spouts Pages 9–10TPTS Model Black Tap Sensor Kits ............................................................................................................................ Page 9TPTS Model Chrome Tap Sensor Kits ..................................................................................................................... Page 9TPTS Model Brushed Stainless Steel Tap Sensor Kits ....................................................................... Page 10Touchpad Switch Kits for your Tap Spouts ................................................................................................. Page 10Programmable Tap Sensor Kits for your Tap Spouts .......................................................... Pages 10–11
“No Touch” Sensor Kits for your Shower Heads and Bath Spouts Pages 11-12Touchpad Switch Kits for your Bath ................................................................................................................... Page 12Programmable Shower and Bath Sensor Kits ......................................................................................... Page 12
Thermostatic Mixing Valves Page 12
Anti-Ligature and Vandal-Resistant Tap Spouts and Showerheads Page 13
High Security Sanitaryware Page 14
Hydroflow Water Conditioners Page 15
Swipe Type “No Touch” Sensor Operated WC Flushvalves Pages 16–17Electronic Touchpad WC Flushvalves ............................................................................................................... Page 17Programmable “Auto” Sensor WC Flushvalves ...................................................................................... Page 17
Automatic Sensor Operated Urinal Flushvalves Pages 18–19Programmable Sensor Operated Urinal Flushvalves ..................................................................... Page 19
PIR Urinal Flush Controls Page 19
Proximity Detection Shut Off Valves Page 20PIR Occupancy Switches ................................................................................................................................................. Page 20Normally Closed WRAS Solenoid Valves ....................................................................................................... Page 20
Actuated Valves Page 21Actuated FailsafeOpen/Failsafe Close WRAS Butterfly Valves ............................................. Page 21Actuated FailsafeOpen/Failsafe Close WRAS Ball Valves ........................................................... Page 21
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 8509541
… to our Water and Energy Saving Solutions Product Guide 2019/2020. As an official distributor for Neoperl® we can supply their full range of flow regulators and tap aerators etc., offering innovative solutions regarding drinking water for the plumbing industry. Neoperl® products can shape the water stream, regulate the flow rate and protect drinking water.
Alongside our Robert Pearson inline flow regulator products, these cost-effective products can help achieve BREEAM Points and help meet Code for Sustainable Homes etc. With these products you can achieve water savings of up to 70% by providing constant and maximum flow rates irrespective of fluctuations in changes of water pressure.
The following pages show a selection of the most requested Neoperl® products. We can supply aerators etc. with or without Neoperl® Chrome Housings. Caché® products screw into tap’s female thread (no housing required). For comprehensive product information visit www.robertpearson.co.uk/products/water-flow-regulators/ or visit www.neoperl.net
Perlator® Honeycomb
Female M22 and Male M24Housings for Standard (STD) aerator
Cascade®
Female M19 and Male M20Housings for Tiny Junior (TJ) aerator
or Cascade® SLC?
Male M18, Female M16 / IG 3/8”Housings for Tom Thumb (TT) aerator
Improved lime protectionDamage proof: unlike conventional wire mesh screens, the HONEYCOMB structure cannot be crushed. Integrated anti-clogging dome screen filters sediments and particles.
Superior lime protectionDamage proof: unlike conventional wire mesh screens, the CASCADE® structure cannot be crushed. Integrated anti-clogging dome screen filters sediments and particles.
Smart Lime Cleaning (SLC) for a maximum lifespan of your tap aerator:All the features of Cascade® + maximum lime resistance.No need to remove the aerator for cleaning.
Welcome …
Male M28Housing for Tubfiller (TF) aerator
US Female 3/4” and US Male 13/16”Housings for Junior (JR) aerator
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 8509542
Water Saving Tap Aerators and Flow RegulatorsNo plumbing required to fit. Simply replace existing tap aerator or flow straightener
Order Code: RP/CAAFRAvailabe Flow Rates/Colour Coding
Order Code: RP/MIKADOAvailabe Flow Rates/Colour Coding
1.9 Lpm Lime Green3.8 Lpm Blue5 Lpm Orange
6 Lpm Black 8 Lpm White
1.3 Lpm Brown1.9 Lpm Lime Green
3.8 Lpm Blue4.5 Lpm Pink
RP/CAAFR Cascade model combined aerator and flow regulator
RP/MIKADO model flow regulator with grid-like spray pattern
Order Code: RP/SPRAY-ITRAvailabe Flow Rates/Colour Coding
Order Code: RP/LAMINARAvailabe Flow Rates/Colour Coding
3.8 Lpm Blue5 Lpm Orange
7 Lpm Green
1.9 Lpm Lime Green3.8 Lpm Blue5 Lpm Orange
6 Lpm Black 8 Lpm White
RP/SPRAY-ITR model flow regulator with soft rain-like spray
RP/LAMINAR Perlator model combined laminar and flow regulator (does not aerate the water)
For additional information visit:robertpearson.co.uk/products/water-flow-regulators/
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 8509543
Water Saving Tap Aerators and Flow RegulatorsNo plumbing required to fit. Simply replace existing tap aerator or flow straightener
For additional information visit:robertpearson.co.uk/products/water-flow-regulators/
Order Code: RP/CACHEAvailabe Flow Rates/Colour Coding
Order Code: RP/SSRAvailabe Flow Rates/Colour Coding
Caché Service KeyOrder Codes:
3.8 Lpm Blue5 Lpm Orange6 Lpm Black
7 Lpm Green 8 Lpm White
3.8 Lpm Blue5 Lpm Orange6 Lpm Black
7 Lpm Green 8 Lpm White
RP/CACHÉ Perlator model combined aerator and flow regulator Screws into female tap thread—no housing required
Order Code: RP/UNRESTRICTED
RP/SSR Perlator model combined aerator and flow regulator with swivel feature
RP/UNRESTRICTED model flow straightener (mainly for taps used in low pressure installations)
The angle of the water stream can be adjusted directly at the aerator by moving the adjust-able tilting plate. Swivel angle (depending on the aerator model): ± 6° up to ± 10°
RP/CACHE/KEY/TT
RP/CACHE/KEY/TJ
RP/CACHE/KEY/JR
RP/CACHE/KEY/STD Approximate size guide for caché service keys: Yellow (TT) = 16mm, Green (TJ) = 18mmRed (JR) = 21mm, Grey (STD) = 24mm
Water Saving Shower Flow RegulatorsNo plumbing required. Water savings and improved distribution at peak times
Order Code: RP/SFR/DWAvailabe Flow Rates/Colour Coding
Order Code: RP/PCW-01Availabe Flow Rates/Colour Coding
Order Code: RP/PCW-02Availabe Flow Rates/Colour Coding
4 Lpm Grey6 Lpm Black 8 Lpm White9 Lpm Orange
10 Lpm Blue 12 Lpm Red 15 Lpm Lime Green
4 Lpm Dark Grey6 Lpm Black 8 Lpm White 9 Lpm Orange
10 Lpm Light Blue 12 Lpm Red 15 Lpm Lime Green
2 Lpm Olive4 Lpm Dark Grey6 Lpm Black 8 Lpm White
9 Lpm Orange10 Lpm Light Blue 12 Lpm Red
RP/SFR/DW model ½” Shower Flow Regulator c/w chrome housing
RP/PCW-01 model ½” Washer Regulator for shower hose
RP/PCW-02 model ½” Washer Regulator for male thread shower handles (and bib/pillar tap tails)
Water Saving Tap Tail Flow RegulatorsNo plumbing required. Water savings and improved distribution at peak times
Order Code: RP/DWSA/TTFRAvailabe Flow Rates/Colour Coding
1.4 Lpm Brown1.9 Lpm Yellow2.5 Lpm Orange3.5 Lpm Beige5 Lpm Violet
6 Lpm Pink 8 Lpm Red9 Lpm Lilac 10 Lpm Black 12 Lpm White
RP/DWSA/TTFR model ½” Tap Tail Flow Regulator c/w chrome housing
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 8509544
Water Saving Inline Flow Regulators
• Up to 70% water savings at taps and showers etc. by ensuring maximum and constant flow rates, irrespective of changes in water pressure between 1 & 10 bar unless stated otherwise. Reduced hot water consumption also provides energy savings
• Improves water distribution around the site especially at peak demand periods
Order Codes: 15mm RP/ACC or 22mm RP/ACC
Order Code: 15mm RP/ISO
Order Code: 15mm RP/GA
Optional strainer available on request. Optional Red and/or Blue Handles for the valves available on request.
Availabe Flow Rates (litres per minute) for both 15mm RP/ACC and 22mm RP/ACC
2.5 Lpm Lime Green 4 Lpm Pink6 Lpm Grey 8 Lpm White
10 Lpm Yellow 12 Lpm Brown 15 Lpm Blue 18 Lpm Green
Availabe Flow Rates (litres per minute) for 15mm RP/GA
4 Lpm Pink6 Lpm Grey 8 Lpm White 10 Lpm Yellow
12 Lpm Brown 15 Lpm Blue 18 Lpm Green
Optional Red and/or Blue Handles for the valves available on request.
Availabe Flow Rates (litres per minute) for 15mm RP/ISO
4 Lpm Grey5 Lpm Yellow 6 Lpm Black 8 Lpm White
10 Lpm Blue 12 Lpm Red 15 Lpm Lime Green 18 Lpm Green
Can help achieve BREEAM points. Help meet Code for Sustainable Homes etc.
RP/ACC model combined flow reulating & isolating ACCESS valve (for outlets supplied with water pressure 0.5 Bar – 6 Bar maximum)
RP/ISO model combined flow reulating & isolating valve
RP/GA model flow regulating insert(for your own choice of compression ended 15mm valve)
For additional information visit:robertpearson.co.uk/products/water-flow-regulators/
www.robertpearson.co.uk Tel: 01985 8509545
Automatic “No Touch” Sensor Operated TapsUse up to 70% less water than conventional taps. Can help achieve BREEAM Points
“Special-build” two tone c/w PVD charcoal black body(200mm spout projection)
Panel Mounted Brushed Stainless Steel Sensor Tap Kits
Panel Mounted Sensor Tap (150mm spout projection)Mains Powered: SSTW-M/150mm
Battery Powered: SSTW-B/150mm
Panel Mounted Sensor Tap (200mm spout projection)Mains Powered: SSTW-M/200mm
Battery Powered: SSTW-B/200mm
Panel Mounted Sensor Tap (250mm spout projection)Mains Powered: SSTW-M/250mm
Battery Powered: SSTW-B/250mm
Each kit c/w: 1 x pre-wired Sensor Tap fitted with 5 Lpm flow regulator (lower flow rates available if specified),
1 x 15mm Solenoid Valve 0.75 bar – 10 bar (low pressure 0 bar – 1.5 bar maximum available if specified)
1 x pre-wired 6v PSU or pre-wired Battery Pack.
• Easy to operate – simply put your hands in front of the sensor
• Reliable & Hygienic “No-touch” operation
• Optional automatic purge facility available
(optional) Y Distributor(optional) Y Distributor
(optional) Y Distributor
(optional) Y Distributor
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 8509546
Highneck Sensor Tap Chrome finish (for vessel basins)Mains Powered: CPTHN-MBattery Powered: CPTHN-B
Highneck Sensor Tap Brushed steel (for vessel basins)Mains Powered: SSHN-MBattery Powered: SSHN-B
Shortneck Sensor Tap Chrome finishMains Powered: CPTSN-MBattery Powered: CPTSN-B
Shortneck Sensor Tap Brushed steel finishMains Powered: SSSN-MBattery Powered: SSSN-B
32º Spout Projection Sensor Tap Brushed steel finishMains Powered: SS32-MBattery Powered: SS32-B
Sensor Tap Chrome finish Mains Powered: CSN-MBattery Powered: CSN-B
Basin/Deck Mounted Sensor Tap Kits
Sensor Tap Chrome finishMains Powered: CMT-MBattery Powered: CMT-B
For additional information visit:robertpearson.co.uk/products/sensor-taps/
45º Spout Projection Sensor Tap Brushed steel finishMains Powered: SS45-MBattery Powered: SS45-B
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 8509547
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 8509548
Black Tap Spouts
Chrome Tap Spouts
Panel-mounted Stainless Steel Tap Spouts
Use our remote no-touch sensor kits to control the water flow for these spouts
TECHNICAL DATAOperating pressure ............... 5 Bar maximumMax Inlet temp ...................... 65 ºCFinish .......................................... Powder coatedStandard flow reg. ................ 3.8 LpmOptional flow reg. ................. 1.9, 5, 6 or 8 Lpm
Optional unrestricted insert for very low water applications on request
Other RAL colours available
TECHNICAL DATAOperating pressure ............... 5 Bar maximumMax Inlet temp ...................... 65 ºCFinish .......................................... ChromeStandard flow reg. ................ 3.8 LpmOptional flow reg. ................. 1.9, 5, 6 or 8 Lpm
Optional unrestricted insert for very low water applications on request
TECHNICAL DATASpout projection .................... 200mm (approx.)Standard flow reg. ................ 5 Lpm
TECHNICAL DATASpout projection .................... 200mm (approx.)Standard flow reg. ................ Unrestricted
“Twist-and-Lock” function: can be used in any application, but designed specifically for healthcare environments as the spout can quickly and easily be removed by the building manager for cleaning, ensuring minimal downtime.
Black panel-mounted spoutOrder Code: MB3TS-PM
Chrome panel-mounted spoutOrder Code: CTS-PM
Spout with 60º water oulet endOrder Code: EZ-SS-60
Spout with 60º water oulet endOrder Code: SSEZ-60-Healthcare
Black deck/basin-mounted spoutOrder Code: MB3TS-DM
Chrome deck/basin-mounted spoutOrder Code: CTS-DM
Spout with 90º water oulet endOrder Code: EZ-SS-90
Spout with 90º water oulet endOrder Code: SSEZ-90-Healthcare
“No-Touch” Sensor Kits for your Tap Spouts
TPTS model Black Tap Sensor kits
TPTS model Chrome Tap Sensor kits
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 850954
Anti-ligature sensor with 50mm detection range. Gives you total flexibility of design
9
Battery-poweredOrder Code: TPTS-B/HP/MB3/1 Tap Sensor kitOrder Code: TPTS-B/HP/MB3/2 Tap Sensor kit
Other RAL colours available
Battery-poweredOrder Code: TPTS-B/HP/CHR/1 Tap Sensor kit
Order Code: TPTS-B/HP/CHR/2 Tap Sensor kit
This could be your own spout
Our sensor
• Optional automatic purge facility available to flush taps that have not been used for long periods.
• Optional lock out facility also available on mains powered kits.
Mains-poweredOrder Code: TPTS-M/HP/MB3/1 Tap Sensor kit
Order Code: TPTS-M/HP/MB3/2 Tap Sensor kit
Other RAL colours available
Water Pressure – Mains poweredStandard pressure valves 0.5 bar – 6 bar Low pressure valves 0 bar – 0.5 bar maximum replace HP with LP in order code.
Mains-poweredOrder Code: TPTS-M/HP/CHR/1 Tap Sensor kit
Order Code: TPTS-M/HP/CHR/2 Tap Sensor kit
Water Pressure – Battery poweredStandard pressure valves 0.75 bar – 10 barLow pressure valves 0 bar – 1.5 bar maximum (replace HP with LP in order code)Very low pressure valves 0 bar – 0.5 bar maximum (replace HP with VLP in order code)
Page 3
Step 10 : Time settings & basic operation (Programmable sensor)
Page 7
3
220-240V a.c
21
220-240V a.c
Page 1Flushvalve WC Flushing System Instructions - Version INFL002 v2.0 180511
Your kit will include the following items:
*unless purchasing the Flushvalve individually
Safe
ty fi
rst
Kit
co
nte
nts
Boa
rd la
you
t -
Insid
e li
d
These instructions relate to the use of the Flushvalve WC Flushing System V2 with the Fully Automatic Sensor. Any external or ‘add-on’ parts will be supplied with separate instructions.
It is recommended that the electrical part of the installation be carried out by a qualified electrician in accordance with the latest electrical regulations. It is also recommended that any plumbing is carried out by a qualified plumber.
This is a sophisticated electronic device which must be installed correctly to perform correctly.
If the appliance is used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, they must be given adequate supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT: Please read these instructions carefully and follow each stage in order!
Key (Right):
1. Flush time and option setting switch2. Power socket - In3. Power socket - Out (For multiple installa-
tions)4. Automatic Sensor input5. Wave-On or tactile switch Sensor input
(optional)6. Flushvalve input
Safety
• CAUTION! 220-240V a.c.• NEVER open the cover with the supply live.• DO NOT extend cables.• DO NOT leave badly fitted cables.• DO NOT leave slack cables in the
enclosure.• DO NOT interfere with the mains flex.• DO check all cables and connections.• DO ask for advice if/when necessary.
ON
1
2
3
4
5
6
7
8
OIP
WC Flushvalve V2
1 ½” BSP(2” BSP Optional)
Control system
Automatic sensor with bezel
Wave-On sensor (optional)
Backplate (80mm DIA)(optional)
1
2
3
4 5 6
1
3
220-240V a.c
21
220-240V a.c
Page 1Flushvalve WC Flushing System Instructions - Version INFL002 v2.0 180511
Your kit will include the following items:
*unless purchasing the Flushvalve individually
Safe
ty fi
rst
Kit
co
nte
nts
Boa
rd la
you
t -
Insid
e li
d
These instructions relate to the use of the Flushvalve WC Flushing System V2 with the Fully Automatic Sensor. Any external or ‘add-on’ parts will be supplied with separate instructions.
It is recommended that the electrical part of the installation be carried out by a qualified electrician in accordance with the latest electrical regulations. It is also recommended that any plumbing is carried out by a qualified plumber.
This is a sophisticated electronic device which must be installed correctly to perform correctly.
If the appliance is used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, they must be given adequate supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT: Please read these instructions carefully and follow each stage in order!
Key (Right):
1. Flush time and option setting switch2. Power socket - In3. Power socket - Out (For multiple installa-
tions)4. Automatic Sensor input5. Wave-On or tactile switch Sensor input
(optional)6. Flushvalve input
Safety
• CAUTION! 220-240V a.c.• NEVER open the cover with the supply live.• DO NOT extend cables.• DO NOT leave badly fitted cables.• DO NOT leave slack cables in the
enclosure.• DO NOT interfere with the mains flex.• DO check all cables and connections.• DO ask for advice if/when necessary.
ON
1
2
3
4
5
6
7
8
OIP
WC Flushvalve V2
1 ½” BSP(2” BSP Optional)
Control system
Automatic sensor with bezel
Wave-On sensor (optional)
Backplate (80mm DIA)(optional)
1
2
3
4 5 6
With the control box installed, and the appropriate dip switchesselected in step.8 (for standard wave sensor) or settings selected via the Programmer in step.10 (for programmable sensor), there are slight variations to follow depending on whether the standard wave or programmable sensor is used- so please read carefully.
Plug battery in to the battery connector (see step.6 diagram). The LED should flash twice, then after approximately 10 seconds it should flash again to indicate that the capacitors are charged- the board is now ready to go. This procedure is the same for both the standard wave and programmable sensor.
For the standard wave sensor (master) only - set the time parameters using the switches, and actuate the flushvalve to ensure that the times set via the switches, correspond with the actual live flushtime.
For the programmable sensor startup - all switches need to be switched to the OFF position. Using the handheld programmer, connect to the sensor and program the appropriate settings, (full list of menu settings are detailed in the Handheld Programmer instructions). Ensure that the times set correspond with the -
IMPORTANT : Battery low indicator will not sound if the alarm jumper is removed from board (alarm jumper indicated in Step.3 Board Layout diagram)
actual live flushtime.
Dual flush (using both sensors) - connect both sensors to the control box and set the appropriate flushtime for each, e.g. for the programmable sensor, set flushtime to 6 seconds, and for sensor 2 (half flush) will operate the flush for half the time of the master sensor, so in this case 3 seconds.
Once the flushtimes are set, the Flushvalve WC Flushing System is now ready to use.
Time settings
Below details the full range of default and optional settings for both the Auto Flushvalve and Wave Flush modes, via the DVS Handheld Programmer:
1 2 3 4 5 6
Time settings
Option settings
ON
IMPORTANT : Please ensure that all 6 of the dip switches arein the OFF / downward position (see right), prior to adjustingany settings via the handheld programmer.
Step 11 : Final step - setup routine
PLEASE NOTE : A 30 second delay between cycles to allow for the cistern to refill.
AUTO FLUSH VALVE MENURangeUser Detect TimeDual Detect TimeFlush Time(s)Walk Away TimeAutomatic PurgePurge Run TimeLock Outs
WAVE FLUSH VALVE MENUFlush TypeFlush Time(s)RangeAutomatic PurgePurge Run TimeLock Outs
DEFAULT SETTINGS
55 Seconds20 Seconds4 Seconds2 SecondsOFF4 SecondsOFF
Single4 Seconds2OFF4 SecondsOFF
OPTIONAL SETTINGS
1-10 1-10 Seconds10, 12, 14, 16, 18, 20, 22, 24, 26 & 28 Seconds2, 2.5, 3, 3.5, 4, 3/4.5, 3/5, 3.5/5.5, 4/6 & 6.5 Secs 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5 & 5.5 SecondsOFF, 3, 6, 12, 24, 36, 48 & 72 Hours2, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 SecondsOFF, 2-10 Ops
Single or Dual2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 Seconds1-3OFF, 3, 6, 12, 24, 36, 48 & 72 Hours2, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 SecondsOFF, 2-10 Ops
NOTE : For information on basic operation, data processing, charging and programmer layout please refer to the Handheld Programmer operating instructions.
Each 1 Tap Sensor kit c/w 1 x Control Box, 1 x pre-wired Solenoid Valve, 1 x pre-wired Sensor.
Each 2 Tap Sensor kit c/w 1 x Control Box, 2 x pre-wired Solenoid Valve, 2 x pre-wired Sensor.
For additional information visit:robertpearson.co.uk/products/tap-sensor-controls/
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 850954
TPTS model Brushed Stainless Steel Tap Sensor kits
Touchpad Switch Kits for your Tap Spouts
10
Battery-poweredOrder Code: TPTS-B/HP/SS/1 Tap Sensor kit
Order Code: TPTS-B/HP/SS/2 Tap Sensor kit
Battery-poweredOrder Code: TPTS-B/HP/1 Tap Touchpad kitOrder Code: TPTS-B/HP/2 Tap Touchpad kit
Mains-poweredOrder Code: TPTS-M/HP/SS/1 Tap Sensor kit
Order Code:
Battery-poweredOrder Code: TPTS-B/HP/2 Tap AV Sensor kit
Mains-poweredOrder Code: TPTS-M/HP/2 Tap AV Sensor kit
Mains-poweredOrder Code: TPTS-M/HP/1 Tap Touchpad kit
Order Code: TPTS-M/HP/2 Tap Touchpad kit
For applications that require separate hot and cold supplies use colour coded AV sensors
Lightly press the touchpad switch to turn the water on
For additional information visit:robertpearson.co.uk/products/programmable-sensors/
Programmable Tap Sensor Kits for your Tap Spouts Simply put your hand within the sensing range to activate the water
Programmable Steel Sensor KitMains Order Code: PsensT-MBattery Order Code: PsensT-B
Each kit comes with 1 x pre-wired Programmable Sensor, 1 x pre-wired Solenoid Valve and 1 x pre-wired 6vPSU or pre-wired battery pack.
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
Battery-poweredBlue Insert (Cold) Tap Sensor KitOrder Code: PsensT(B)-B
Red Insert (Hot) Tap Sensor KitOrder Code: PsensT(R)-B
Mains-powered 2 Tap KitRed + Blue Inserts 2 Tap Sensor Kit PsensT(R+B)-M / 2 Tap Kit
Kit c/w: 2 x Programmable Sensors, 2 x Pre-wired 15mm Solenoid Valves, 1 x Pre-wired 6V PSU, 1 x Y-Connector
For separate hot and cold supplies per basin use special colour coded Tap Sensors
For separate hot and cold supplies to your bath tub use colour coded AV Bath Sensors
For additional information visit:robertpearson.co.uk/products/shower-and-bath-sensor-controls/
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 85095411
Mains-poweredShower Order Codes: TPTS-M/HP/1 Shower Sensor kitTPTS-M/HP/2 Shower Sensor kit
Bath Order Code: TPTS-M/HP/1 Bath Sensor kit
Battery-poweredShower Order Codes: TPTS-B/HP/1 Shower Sensor kitTPTS-B/HP/2 Shower Sensor kit
Bath Order Code: TPTS-B/HP/1 Bath Sensor kit
“No-Touch” Sensor Kits for Shower Heads and Bath SpoutsWaterproof brushed stainless steel bath/shower sensor c/w 8 metre cable
Each 1 Bath AV Sensor kit c/w 1 x Control Box, 1 x pre-wired Solenoid Valve, 1 x pre-wired AV Sensor (specify colour).
Each 2 Bath AV Sensor kit c/w 1 x Control Box, 2 x pre-wired Solenoid Valve, 2 x pre-wired Sensor (1 red, 1 blue).
Battery-poweredOrder Codes: TPTS-B/HP/1 Bath AV Sensor Kit
TPTS-B/HP/2 Bath AV Sensor Kit
Mains-poweredOrder Codes: TPTS-M/HP/1 Bath AV Sensor Kit
TPTS-M/HP/2 Bath AV Sensor Kit
This could be your own shower head
Each 1 Shower/Bath Sensor kit c/w 1 x Control Box, 1 x pre-wired Solenoid Valve, 1 x pre-wired Waterproof Sensor.
Each 2 Shower Sensor kit c/w 1 x Control Box, 2 x pre-wired Solenoid Valve, 2 x pre-wired Waterproof Sensor.
Touchpad Switch Kits for your Bath
Battery-poweredOrder Code: TPTS-B/HP/1 Bath Touchpad kitOrder Code: TPTS-B/HP/2 Bath Touchpad kit
Battery-poweredShower Sensor Kit Order Code: PsensS-B
Bath Sensor Kit Order Code: PsensB-B
Mains-poweredOrder Code: TPTS-M/HP/1 Bath Touchpad kit
Order Code: TPTS-M/HP/2 Bath Touchpad kit
Mains-poweredShower Sensor Kit Order Code: PsensS-M
Bath Sensor Kit Order Code: PsensB-M
Lightly press the touchpad switch to turn the water on
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 85095412
Programmable Shower and Bath Sensor Kits Simply put your hand within the sensing range to activate the water
Each kit comes with 1 x pre-wired Programmable Sensor, 1 x pre-wired Solenoid Valve and 1 x pre-wired 6vPSU or pre-wired battery pack.
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
Thermostatic Mixing Valves
Order Codes:
15mm TMV3 Order Code: RP/TMV3/15
22mm TMV3 Order Code: RP/TMV3/22
15mm c/w MX service valve Order Code: RP/TMV3/MX/15
22mm c/w MX service valve Order Code: RP/TMV3/MX/22
All c/w Strainers and Check ValvesAvailable option 1 c/w Compression Top Connectors Available option 2 c/w Test Points
Delivers safe, blended hot water to taps, bidets and other water outlets
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 85095413
Anti-ligature Taps and Showerheads
Vandal Resistant Taps and Showerheads
Order Code: ALN-DM(v2)
Use our TPTS remote “no-touch” sensor kits to control the water flow automatically
Use our TPTS remote “no-touch” sensor kits to control the water flow automatically
Basin/Deck Mounted Anti-Ligature Tap Spout
Ceiling Mounted Anti-ligature Shower Head
Panel Mounted Tap Spout Panel Mounted Spout Panel Mounted Shower Head
Order Code: ALCMSH-PM(v2)
Order Code: VRTS-PM Order Code: VRSH-PMOrder Codes: VRBS-PM Bath SpoutVRBS(Tap)-PM Tap Spout
For additional information visit:robertpearson.co.uk/products/anti-ligature-taps/
High Security SanitarywareIdeal for Custodial, Mental Health projects, and washrooms where vandalism is a high risk
These TPTS sensors or touchpad switches fit into the backplate
Bath Backplate
Automatic sensor or touchpad switch Order Code: HSBP-BATH Remote Backplate for Bath
Order Code: HSBP-BASIN Remote Backplate for Basin
Order Code: HSWHB-INT High Security Integrated Basin & Backplate
Order Code: HSWHB-ST-INT High Security Integrated Single Tap Basin & Backplate
Anti-ligature Sensors or Touchpads for High Security Basin & Backplates
No Touch Sensors Touchpad Switches
Order Code: HSFP Floor standing WC Pan
Order Code: HSFP-Blue Gel Floor standing Blue Gel WC Pan
Order Code: HSWP Wall hung WC Pan
For additional information visit:robertpearson.co.uk/products/security-sanitaryware/
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 85095414
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 85095415
Domestic Unit Domestic/Light Commercial
Commercial Units
• No plumbing, maintenance or chemicals required
• Improve energy efficiency on hot water heating systems and prolong the life of plumbing equipment in hard water areas
• Help remove existing scale build-up – just 3mm of limescale can add 20% to your heating bills!
• Commercial Units available for pipe sizes up to 200mm outside diameter. We can custom build models to suit any larger size pipe
Order Code: C32
Order Code: C65 Order Code: C100
Order Code: HS38 Order Code: HS40
Order Code: C40
Order Code: C50 Order Code: C80 Order Code: C125
Hydroflow Water ConditionersHelp prevent the build-up of encrusting limescale in plumbing systems
For additional information visit:robertpearson.co.uk/products/limescale-control/
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 850954
For additional information visit:robertpearson.co.uk/products/sensor-wc-flush/
16
Swipe Type “No-Touch” Sensor WC Flushvalves
38mm Chrome Bezel KitMains Powered Order Code: WCFV-ioBattery Powered Order Code: WCFV-B
38mm Stainless Steel Bezel KitMains Powered Order Code: WCFV-io-SSBattery Powered Order Code: WCFV-B-SS
38mm Matt Black 3 Bezel KitMains Powered Order Code: WCFV-io-PCMB3Battery Powered Order Code: WCFV-B-PCMB3
50mm Chrome Bezel KitMains Powered Order Code: WCFV-io (50)Battery Powered Order Code: WCFV-B (50)
50mm Stainless Steel Bezel KitMains Powered Order Code: WCFV-io-SS (50)Battery Powered Order Code: WCFV-B-SS (50)
Other RAL colours available
Simply put your hand within 50mm (2") of sensor to activate flush
Up to 50% water savings compared to some conventional siphonic flushing systems
Each kit comes with 1 x pre-wired Flushing Valve, 1 x Control Box and 1 x pre-wired Sensor.
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
Page 3
Step 10 : Time settings & basic operation (Programmable sensor)
Page 7
3
220-240V a.c
21
220-240V a.c
Page 1Flushvalve WC Flushing System Instructions - Version INFL002 v2.0 180511
Your kit will include the following items:
*unless purchasing the Flushvalve individually
Safe
ty fi
rst
Kit
co
nte
nts
Boa
rd la
you
t -
Insid
e li
d
These instructions relate to the use of the Flushvalve WC Flushing System V2 with the Fully Automatic Sensor. Any external or ‘add-on’ parts will be supplied with separate instructions.
It is recommended that the electrical part of the installation be carried out by a qualified electrician in accordance with the latest electrical regulations. It is also recommended that any plumbing is carried out by a qualified plumber.
This is a sophisticated electronic device which must be installed correctly to perform correctly.
If the appliance is used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, they must be given adequate supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT: Please read these instructions carefully and follow each stage in order!
Key (Right):
1. Flush time and option setting switch2. Power socket - In3. Power socket - Out (For multiple installa-
tions)4. Automatic Sensor input5. Wave-On or tactile switch Sensor input
(optional)6. Flushvalve input
Safety
• CAUTION! 220-240V a.c.• NEVER open the cover with the supply live.• DO NOT extend cables.• DO NOT leave badly fitted cables.• DO NOT leave slack cables in the
enclosure.• DO NOT interfere with the mains flex.• DO check all cables and connections.• DO ask for advice if/when necessary.
ON
1
2
3
4
5
6
7
8
OIP
WC Flushvalve V2
1 ½” BSP(2” BSP Optional)
Control system
Automatic sensor with bezel
Wave-On sensor (optional)
Backplate (80mm DIA)(optional)
1
2
3
4 5 6
1
3
220-240V a.c
21
220-240V a.c
Page 1Flushvalve WC Flushing System Instructions - Version INFL002 v2.0 180511
Your kit will include the following items:
*unless purchasing the Flushvalve individually
Safe
ty fi
rst
Kit
co
nte
nts
Boa
rd la
you
t -
Insid
e li
d
These instructions relate to the use of the Flushvalve WC Flushing System V2 with the Fully Automatic Sensor. Any external or ‘add-on’ parts will be supplied with separate instructions.
It is recommended that the electrical part of the installation be carried out by a qualified electrician in accordance with the latest electrical regulations. It is also recommended that any plumbing is carried out by a qualified plumber.
This is a sophisticated electronic device which must be installed correctly to perform correctly.
If the appliance is used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, they must be given adequate supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT: Please read these instructions carefully and follow each stage in order!
Key (Right):
1. Flush time and option setting switch2. Power socket - In3. Power socket - Out (For multiple installa-
tions)4. Automatic Sensor input5. Wave-On or tactile switch Sensor input
(optional)6. Flushvalve input
Safety
• CAUTION! 220-240V a.c.• NEVER open the cover with the supply live.• DO NOT extend cables.• DO NOT leave badly fitted cables.• DO NOT leave slack cables in the
enclosure.• DO NOT interfere with the mains flex.• DO check all cables and connections.• DO ask for advice if/when necessary.
ON
1
2
3
4
5
6
7
8
OIP
WC Flushvalve V2
1 ½” BSP(2” BSP Optional)
Control system
Automatic sensor with bezel
Wave-On sensor (optional)
Backplate (80mm DIA)(optional)
1
2
3
4 5 6
With the control box installed, and the appropriate dip switchesselected in step.8 (for standard wave sensor) or settings selected via the Programmer in step.10 (for programmable sensor), there are slight variations to follow depending on whether the standard wave or programmable sensor is used- so please read carefully.
Plug battery in to the battery connector (see step.6 diagram). The LED should flash twice, then after approximately 10 seconds it should flash again to indicate that the capacitors are charged- the board is now ready to go. This procedure is the same for both the standard wave and programmable sensor.
For the standard wave sensor (master) only - set the time parameters using the switches, and actuate the flushvalve to ensure that the times set via the switches, correspond with the actual live flushtime.
For the programmable sensor startup - all switches need to be switched to the OFF position. Using the handheld programmer, connect to the sensor and program the appropriate settings, (full list of menu settings are detailed in the Handheld Programmer instructions). Ensure that the times set correspond with the -
IMPORTANT : Battery low indicator will not sound if the alarm jumper is removed from board (alarm jumper indicated in Step.3 Board Layout diagram)
actual live flushtime.
Dual flush (using both sensors) - connect both sensors to the control box and set the appropriate flushtime for each, e.g. for the programmable sensor, set flushtime to 6 seconds, and for sensor 2 (half flush) will operate the flush for half the time of the master sensor, so in this case 3 seconds.
Once the flushtimes are set, the Flushvalve WC Flushing System is now ready to use.
Time settings
Below details the full range of default and optional settings for both the Auto Flushvalve and Wave Flush modes, via the DVS Handheld Programmer:
1 2 3 4 5 6
Time settings
Option settings
ON
IMPORTANT : Please ensure that all 6 of the dip switches arein the OFF / downward position (see right), prior to adjustingany settings via the handheld programmer.
Step 11 : Final step - setup routine
PLEASE NOTE : A 30 second delay between cycles to allow for the cistern to refill.
AUTO FLUSH VALVE MENURangeUser Detect TimeDual Detect TimeFlush Time(s)Walk Away TimeAutomatic PurgePurge Run TimeLock Outs
WAVE FLUSH VALVE MENUFlush TypeFlush Time(s)RangeAutomatic PurgePurge Run TimeLock Outs
DEFAULT SETTINGS
55 Seconds20 Seconds4 Seconds2 SecondsOFF4 SecondsOFF
Single4 Seconds2OFF4 SecondsOFF
OPTIONAL SETTINGS
1-10 1-10 Seconds10, 12, 14, 16, 18, 20, 22, 24, 26 & 28 Seconds2, 2.5, 3, 3.5, 4, 3/4.5, 3/5, 3.5/5.5, 4/6 & 6.5 Secs 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5 & 5.5 SecondsOFF, 3, 6, 12, 24, 36, 48 & 72 Hours2, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 SecondsOFF, 2-10 Ops
Single or Dual2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 Seconds1-3OFF, 3, 6, 12, 24, 36, 48 & 72 Hours2, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 SecondsOFF, 2-10 Ops
NOTE : For information on basic operation, data processing, charging and programmer layout please refer to the Handheld Programmer operating instructions.
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 85095417
For additional information visit:robertpearson.co.uk/products/programmable-sensors/
Electronic Touchpad WC Flushvalves
Programmable “Auto” Sensor WC Flushvalves Automatically flushes WC when person moves away
Programmable Steel Sensor KitMains powered Order Code:PsensWC-AUTO-M
Battery powered Order Code:PsensWC-AUTO-B
50mm Stainless Steel Touchpad KitMains Powered Order Code:WCFV-io-TPS
Battery Powered Order Code: WCFV-B-TPS
Each kit comes with 1 x pre-wired Flushing Valve, 1 x Control Box and 1 x pre-wired Touchpad.
Each kit comes with 1 x pre-wired Flushing Valve, 1 x Control Box and 1 x pre-wired Programmable Sensor.
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
Page 3
Step 10 : Time settings & basic operation (Programmable sensor)
Page 7
3
220-240V a.c
21
220-240V a.c
Page 1Flushvalve WC Flushing System Instructions - Version INFL002 v2.0 180511
Your kit will include the following items:
*unless purchasing the Flushvalve individually
Safe
ty fi
rst
Kit
co
nte
nts
Boa
rd la
you
t -
Insid
e li
d
These instructions relate to the use of the Flushvalve WC Flushing System V2 with the Fully Automatic Sensor. Any external or ‘add-on’ parts will be supplied with separate instructions.
It is recommended that the electrical part of the installation be carried out by a qualified electrician in accordance with the latest electrical regulations. It is also recommended that any plumbing is carried out by a qualified plumber.
This is a sophisticated electronic device which must be installed correctly to perform correctly.
If the appliance is used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, they must be given adequate supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT: Please read these instructions carefully and follow each stage in order!
Key (Right):
1. Flush time and option setting switch2. Power socket - In3. Power socket - Out (For multiple installa-
tions)4. Automatic Sensor input5. Wave-On or tactile switch Sensor input
(optional)6. Flushvalve input
Safety
• CAUTION! 220-240V a.c.• NEVER open the cover with the supply live.• DO NOT extend cables.• DO NOT leave badly fitted cables.• DO NOT leave slack cables in the
enclosure.• DO NOT interfere with the mains flex.• DO check all cables and connections.• DO ask for advice if/when necessary.
ON
1
2
3
4
5
6
7
8
OIP
WC Flushvalve V2
1 ½” BSP(2” BSP Optional)
Control system
Automatic sensor with bezel
Wave-On sensor (optional)
Backplate (80mm DIA)(optional)
1
2
3
4 5 6
1
3
220-240V a.c
21
220-240V a.c
Page 1Flushvalve WC Flushing System Instructions - Version INFL002 v2.0 180511
Your kit will include the following items:
*unless purchasing the Flushvalve individually
Safe
ty fi
rst
Kit
co
nte
nts
Boa
rd la
you
t -
Insid
e li
d
These instructions relate to the use of the Flushvalve WC Flushing System V2 with the Fully Automatic Sensor. Any external or ‘add-on’ parts will be supplied with separate instructions.
It is recommended that the electrical part of the installation be carried out by a qualified electrician in accordance with the latest electrical regulations. It is also recommended that any plumbing is carried out by a qualified plumber.
This is a sophisticated electronic device which must be installed correctly to perform correctly.
If the appliance is used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, they must be given adequate supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT: Please read these instructions carefully and follow each stage in order!
Key (Right):
1. Flush time and option setting switch2. Power socket - In3. Power socket - Out (For multiple installa-
tions)4. Automatic Sensor input5. Wave-On or tactile switch Sensor input
(optional)6. Flushvalve input
Safety
• CAUTION! 220-240V a.c.• NEVER open the cover with the supply live.• DO NOT extend cables.• DO NOT leave badly fitted cables.• DO NOT leave slack cables in the
enclosure.• DO NOT interfere with the mains flex.• DO check all cables and connections.• DO ask for advice if/when necessary.
ON
1
2
3
4
5
6
7
8
OIP
WC Flushvalve V2
1 ½” BSP(2” BSP Optional)
Control system
Automatic sensor with bezel
Wave-On sensor (optional)
Backplate (80mm DIA)(optional)
1
2
3
4 5 6
With the control box installed, and the appropriate dip switchesselected in step.8 (for standard wave sensor) or settings selected via the Programmer in step.10 (for programmable sensor), there are slight variations to follow depending on whether the standard wave or programmable sensor is used- so please read carefully.
Plug battery in to the battery connector (see step.6 diagram). The LED should flash twice, then after approximately 10 seconds it should flash again to indicate that the capacitors are charged- the board is now ready to go. This procedure is the same for both the standard wave and programmable sensor.
For the standard wave sensor (master) only - set the time parameters using the switches, and actuate the flushvalve to ensure that the times set via the switches, correspond with the actual live flushtime.
For the programmable sensor startup - all switches need to be switched to the OFF position. Using the handheld programmer, connect to the sensor and program the appropriate settings, (full list of menu settings are detailed in the Handheld Programmer instructions). Ensure that the times set correspond with the -
IMPORTANT : Battery low indicator will not sound if the alarm jumper is removed from board (alarm jumper indicated in Step.3 Board Layout diagram)
actual live flushtime.
Dual flush (using both sensors) - connect both sensors to the control box and set the appropriate flushtime for each, e.g. for the programmable sensor, set flushtime to 6 seconds, and for sensor 2 (half flush) will operate the flush for half the time of the master sensor, so in this case 3 seconds.
Once the flushtimes are set, the Flushvalve WC Flushing System is now ready to use.
Time settings
Below details the full range of default and optional settings for both the Auto Flushvalve and Wave Flush modes, via the DVS Handheld Programmer:
1 2 3 4 5 6
Time settings
Option settings
ON
IMPORTANT : Please ensure that all 6 of the dip switches arein the OFF / downward position (see right), prior to adjustingany settings via the handheld programmer.
Step 11 : Final step - setup routine
PLEASE NOTE : A 30 second delay between cycles to allow for the cistern to refill.
AUTO FLUSH VALVE MENURangeUser Detect TimeDual Detect TimeFlush Time(s)Walk Away TimeAutomatic PurgePurge Run TimeLock Outs
WAVE FLUSH VALVE MENUFlush TypeFlush Time(s)RangeAutomatic PurgePurge Run TimeLock Outs
DEFAULT SETTINGS
55 Seconds20 Seconds4 Seconds2 SecondsOFF4 SecondsOFF
Single4 Seconds2OFF4 SecondsOFF
OPTIONAL SETTINGS
1-10 1-10 Seconds10, 12, 14, 16, 18, 20, 22, 24, 26 & 28 Seconds2, 2.5, 3, 3.5, 4, 3/4.5, 3/5, 3.5/5.5, 4/6 & 6.5 Secs 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5 & 5.5 SecondsOFF, 3, 6, 12, 24, 36, 48 & 72 Hours2, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 SecondsOFF, 2-10 Ops
Single or Dual2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 Seconds1-3OFF, 3, 6, 12, 24, 36, 48 & 72 Hours2, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 SecondsOFF, 2-10 Ops
NOTE : For information on basic operation, data processing, charging and programmer layout please refer to the Handheld Programmer operating instructions.
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 850954
Automatic Sensor Operated Urinal Flushvalves
50mm Stainless Steel Bezel KitOrder Code: Standard HP 0.5 Bar - 6 Bar SBUFC(V2)-M/HP/SS
Order Code: Optional LP 0 Bar - 0.5 Bar max SBUFC(V2)-M/LP/SS
50mm Chrome Bezel KitOrder Code: Standard HP 0.5 Bar - 6 Bar SBUFC(V2)-M/HP/CHROME
Order Code: Optional LP 0 Bar - 0.5 Bar max SBUFC(V2)-M/LP/CHROME
50mm Matt Black 3 Bezel KitOrder Code: Standard HP 0.5 Bar - 6 Bar SBUFC(V2)-M/HP/PCMB3
Order Code: Optional LP 0 Bar - 0.5 Bar max SBUFC(V2)-M/LP/PCMB3
36mm Flat Steel Bezel KitOrder Code: Standard HP 0.5 Bar - 6 Bar SBUFC(V2)-M/HP/36mm
Order Code: Optional LP 0 Bar - 0.5 Bar max SBUFC(V2)-M/LP/36mm
Other RAL colours available
For additional information visit:robertpearson.co.uk/products/urinal-flushvalves/
Up to 90% water savings. Can help achieve Wat 1 BREEAM Points
Each kit comes with 1 x pre-wired Solenoid Valve, 1 x Control Box and 1 x pre-wired Sensor.
18
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 85095419
For additional information visit:robertpearson.co.uk/products/programmable-sensors/
Programmable Sensor Operated Urinal Flushvalves
PIR Urinal Flush Controls
Automatically flushes individual urinal bowl when person moves away
Single PIR controls the water flow to a small range of urinal bowls
Programmable Steel Sensor KitMains Order Code: PsensU-M
Each kit comes with 1 x pre-wired Programmable Sensor, 1 x pre-wired Solenoid Valve and 1 x pre-wired 6vPSU.
Page 8
WarrantyThe battery operated Flushvalve Control System kit is guaranteed for 1 year from purchase against defective material and assembly.
SupportFor technical support please visit our technical pages on our website at www.robertpearson.co.uk or contact us by e-mail at [email protected] Alternatively, you can telephone us direct on 01985 850954 and our customer service team will be pleased to help you.
Disposal of electrical and electronic equipment
The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions-
Flushvavle replacement body
Flushvalve with in-built overflow (base only) - 1 1/2” base
Flushvalve with in-built overflow (base only) - 2” base
have been made for the collection and recycling of unwanted electrical and electronic equipment. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre. In order to help preserve our environment we ask that you dispose of this product correctly.Please contact your local council for collection centre details.
Disposal of waste batteries
The use of this crossed out wheeled bin logo indicates that the battery needs to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for the collection and recycling of waste batteries. Outside of the EU it will be necessary to dispose of this product at your local community waste collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this battery correctly. Please contact your local council for collection centre details.
*Drawings not to scale
Step 12 : Base options, warranty, support and end of life disposal
AC01-010
DVS Handheld Programmer with USB interface.
For use with programming DVS taps, showers, urinals, baths and WC flush systems.
Handheld Programmer
Ceiling Recessed PIR (80mm dia)
Mains Powered Order Code: PDLMBattery Powered Order Code: PDLB
For additional information visit:robertpearson.co.uk/products/pir-urinal-controls/
Ceiling Recessed PIR (128mm dia)
Mains Powered Order Code: DLMBattery Powered Order Code: DLB
Installation instructions
2
Kit
co
nte
nts
1
Safe
ty fi
rst
Solenoid valve
PDLM/PDLB Sensor
Optional 6-volt DCDVS power supply (Fig. 1)
PDLM and PDLBUrinal Flush Controller
RP
_PD
LM_P
DLB
_Oct
201
8
These instructions relate to the use of the PDLM or PDLB Urinal Flush Controller only, any external or ‘add-on’ parts will be supplied with separate instructions.
It is recommended that the electrical part of the installation be carried out by a qualified electrician in accordance with the latest electrical regulations. It is also recommended that any plumbing is carried out by a qualified plumber.
This is a sophisticated electronic device which must be installed correctly to perform correctly.
If the appliance is used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, they must be given adequate supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT: Please read these instructions carefully and follow each stage in order!
Your kit will include the PDLM or PDLB sensor shown in Fig 1, one solenoid valve and a lithium 6-volt battery. Alternatively you may have a 6-volt power supply, which will need to be connected to a mains 240V output point.
The water pressure needs to be 0.35 bar minimum to 10 bar maximum. If your water pressure is outside these limits, please contact manufacturer for assistance.
Contact details:Robert Pearson & Company Ltd.Post Office HouseStocktonWarminster (Wilts)BA12 0SE
Tel: 01985 850954Fax: 01985 850112E-mail: [email protected]: www.robertpearson.co.uk
Flushvalve WC Flushing System (battery operated)
PsensWC-B / PsensWCAUTO-BInstallation & Operating Instructions
RP_W
CFV
(bat
tary
)_Ja
n201
7
Installation instructions
2
Kit
co
nte
nts
1
Safe
ty fi
rst
Solenoid valve
PDLM/PDLB Sensor
Optional 6-volt DCDVS power supply (Fig. 1)
Installation instructions
2
Kit
co
nte
nts
1
Safe
ty fi
rst
Solenoid valve
PDLM/PDLB Sensor
Optional 6-volt DCDVS power supply (Fig. 1)
Installation instructions
2
Kit
co
nte
nts
1
Safe
ty fi
rst
Solenoid valve
PDLM/PDLB Sensor
Optional 6-volt DCDVS power supply (Fig. 1)
PDLM and PDLBUrinal Flush Controller
RP
_PD
LM_P
DLB
_Oct
201
8
These instructions relate to the use of the PDLM or PDLB Urinal Flush Controller only, any external or ‘add-on’ parts will be supplied with separate instructions.
It is recommended that the electrical part of the installation be carried out by a qualified electrician in accordance with the latest electrical regulations. It is also recommended that any plumbing is carried out by a qualified plumber.
This is a sophisticated electronic device which must be installed correctly to perform correctly.
If the appliance is used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, they must be given adequate supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT: Please read these instructions carefully and follow each stage in order!
Your kit will include the PDLM or PDLB sensor shown in Fig 1, one solenoid valve and a lithium 6-volt battery. Alternatively you may have a 6-volt power supply, which will need to be connected to a mains 240V output point.
The water pressure needs to be 0.35 bar minimum to 10 bar maximum. If your water pressure is outside these limits, please contact manufacturer for assistance.
Contact details:Robert Pearson & Company Ltd.Post Office HouseStocktonWarminster (Wilts)BA12 0SE
Tel: 01985 850954Fax: 01985 850112E-mail: [email protected]: www.robertpearson.co.uk
Flushvalve WC Flushing System (battery operated)
PsensWC-B / PsensWCAUTO-BInstallation & Operating Instructions
RP_W
CFV
(bat
tary
)_Ja
n201
7
Installation instructions
2
Kit
co
nte
nts
1
Safe
ty fi
rst
Solenoid valve
PDLM/PDLB Sensor
Optional 6-volt DCDVS power supply (Fig. 1)
Installation instructions
2
Kit
co
nte
nts
1
Safe
ty fi
rst
Solenoid valve
PDLM/PDLB Sensor
Optional 6-volt DCDVS power supply (Fig. 1)
Ceiling Surface Mounted PIRMains Powered Order Code: FMMBattery Powered Order Code: FMB
Each kit comes with PIR Sensor, Solenoid Valve and 6v Transformer or Battery Pack.
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 85095420
Normally Closed WRAS Solenoid Valves
PIR Occupancy Switches
• Will switch any lighting load up to 6amps or 1500w or any motor load up to 1amp or 250w
• Adjustable time overrun from 10 seconds to 40 minutes—adjustable “Lux” sensor
Turns lights/valves etc. ON only when the room is occupied. Up to 70% energy savings
Water saving. Can help achieve BREEAM Wat 4 credits
Ceiling Recessed PIR SwitchOrder Code: PIR/D/REC
Ceiling Mounted PIR SwitchOrder Code: PIR/D/SM
Wall Mounted PIR SwitchOrder Code: PIR/D/WM
• 230v standard (optional 12v and 24v on request)
• ½” – 2” size valves available
• Optional valves with manual override
• Optional normally open valves also available (need to be controlled by remote switch rather than PIR)
For additional information visit:robertpearson.co.uk/products/water-shut-off-valves/
Magnetic Valve Opener
Proximity Detection Shut Off Valves
• Allows you to temporarily energise the solenoid vave
• Available in 3 sizes for ½” – 2” size valves
The Problem: Leaking and damaged ball valves and taps etc. are not only an expensive waste of water, but also pose a risk of serious damage from flooding.
The Solution: When the PIR switch detects that the room is occupied, it will automatically turn the water supply and lights etc. “ON” so the appliances work as normal.
www.robertpearson.co.uk For more information call: +44 (0)1985 850854www.robertpearson.co.uk Tel: 01985 85095421
Actuated Failsafe Open/Failsafe Close WRAS Butterfly Valves
Actuated ValvesWater saving. Can help achieve BREEAM Wat 4 credits
Our failsafe actuator uses an internal capacitor to achieve ‘Failsafe’ functionality on loss of power.
Failsafe Close: The actuator powers Open the valve and then on removing power, the capacitor will return the valve to the Failsafe Close position.
Failsafe Open: The actuator powers Close the valve and then on removing power, the capacitor will return the valve to the Failsafe Open position.
• Power Open / Power Close option available
• 230v standard (optional 12v and 24v on request)
• 2” – 16” size WRAS Butterfly Valves
• Lugged or Wafer WRAS Butterfly Valve options
Actuated Failsafe Open/Failsafe Close WRAS Ball ValvesOur failsafe actuator uses an internal capacitor to achieve ‘Failsafe’ functionality on loss of power.
Failsafe Close: The actuator powers Open the valve and then on removing power, the capacitor will return the valve to the Failsafe Close position.
Failsafe Open: The actuator powers Close the valve and then on removing power, the capacitor will return the valve to the Failsafe Open position.
• Power Open / Power Close option available
• 230v standard (optional 12v and 24v on request)
• ½” – 2” size WRAS Ball Valves available
Actuated Failsafe Open/Failsafe Close Ball ValvesOur failsafe actuator uses an internal capacitor to achieve ‘Failsafe’ functionality on loss of power.
Failsafe Close: The actuator powers Open the valve and then on removing power, the capacitor will return the valve to the Failsafe Close position.
Failsafe Open: The actuator powers Close the valve and then on removing power, the capacitor will return the valve to the Failsafe Open position.
• Power Open / Power Close option available
• 230v standard (optional 12v and 24v on request)
• ½” – 4” size Ball Valves available
For additional information visit:robertpearson.co.uk/products/actuated-valves/
ROBERT PEARSON & COMPANY LTDPost Office House, Post Office Lane
Stockton, Warminster Wiltshire BA12 0SE
Telephone: (01985) 850954Facsimile: (01985) 850112
E-Mail: [email protected]: www.robertpearson.co.uk
Projects carried out in 2018 include:Restaurants / Bars / Clubs NandosMcDonaldsZizziWahacaFive GuysBelushis
OfficesThe Gherkin (London)Goldman Sachs (HQ) (London)Blackrock UK (HQ) (London)Verde Building (London)Southbank Place (London)Economist Plaza (London)Chubb Building (London)Abcam HQ (Cambridge)IBM (Warwick)“Can of Ham” (London)100 Bishopsgate (London)1 Bank Street (Canary Wharf)Kings Cross R1 (London)Soho House (London)Google (London)
Factories / IndustrialABP Food Group (Ireland)Gs Fresh Beetroot (Norfolk)LSH Mercedes (Birmingham)
Arts / EntertainmentBBCTricycle Theatre (London)
Empire Cinema (Hemel Hempstead)V&A Museum (Dundee)Bristol Old VicTheatre Royal Stratford East
Sports CentresTwickenham StadiumAll England Lawn Tennis ClubBeacon of Light (Sunderland)Brackley Leisure CentreThe Hive Leisure Centre (Ely)Tottenham Hotspur Training GroundGrasshoppers Rugby Football Club
HotelsStrand Palace Hotel (London)The Lensbury (Teddington)Crown Plaza (Nottingham)Hampton by Hilton (Belfast)One Bishopsgate Plaza (London)Hoxton Hotel (London)Sandford Springs Hotel & Golf Club
EducationTinbergen Building (Oxford Uni)Oxstalls Campus (Gloucester Uni)Fry Building (Bristol University)Francis Holland School (London)Riverside School (Goole)Harris Academy (Dundee)Park Spring School (Leeds)Greenford High SchoolGarth Hill College (Bracknell)
University College School (London)University of WarwickTonbridge SchoolHeriot Watt University (Edinburgh)
Hospitals / HealthcareCheswold Park Hospital (Doncaster)St John of God`s Hospital (Dublin)Priory Hospital GroupSturdee Community HospitalNUA Healthcare (Ireland)Oak Tree Manor (Tendering)East Lothian Community Hospital
Government Dundee City CouncilRoyal Parks (London)Horne Army Barracks (Larkhill)DNRC, Stanford Hall (Leics)MOD (London)MOD RAF Marham (Norfolk)Middlesbrough Town HallCharing Cross Police Station
RetailWestfield Shopping CentresMarks & Spencers Aldi (HQ) (Atherstone
TransportNetwork RailShannon Airport (Ireland)Wigan Bus Station
Not applicable to all products. For full details of WRAS and ECA approved products please contact us