Waste & Storage Bins - Hospitality, Materials Handling ... · Waste & Storage Bins Forklift Tipping...
Transcript of Waste & Storage Bins - Hospitality, Materials Handling ... · Waste & Storage Bins Forklift Tipping...
Type CFS Tipping Bin
The light weight and cost effective type CFS6 Fork Skip Bin has been manufactured from 2mm plate and is suitable for goods or waste transport and storage. Fitted with a forklift carriage and safety chain, two front wheels, a rear swivel wheel and push handle, these bins are designed for manual push over. Zinc plate finish.
• Fork Pocket size: 140 mm x 65 mm
• Fork Pocket Centres: 367 mm
• Safe Working Load: 350 kg
• Drain Plug fitted standard
Waste & Storage Bins Forklift Tipping Bins
TypeCapacity (cu. m)
SWL (kg)
Length (mm)
Height (mm)
Width (mm)
Overall Width (mm)
Unit Weight (kg)
CFS 6 0.35 350 1120 860 580 730 65
CFS 9 0.65 350 1120 860 900 1050 90
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type FSB Tipping Bin
A light weight and cost effective bin suitable for goods transport, storage or waste. Manufactured from 2mm plate, and available in either painted or zinc plated finish.
Fitted with a forklift carriage, these bins are designed for manual push over. Wheels fitted standard, two front and one rear.
• Fork Pocket Size: 160 mm x 65 mm
• FSB6 Fork Pocket Centres: 300 mm
• FSB9 Fork Pocket Centres: 640 mm
Options Available:
• Crane Lugs
• Drain Valve & Strainer
TypeCapacity (cu. m)
SWL (kg)
Length (mm)
Height (mm)
Width (mm)
Overall Width (mm)
Unit Weight (kg)
FSB 6 0.35 350 1120 860 580 730 65
FSB 9 0.65 350 1120 860 900 1050 90
WIDTH
HEIGHT
OVERALL
WIDTH
LENGTH
FSB 6
FSB 9 FSB 6 Tipped
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type NSD Tipping Bin
The NSD self dumping waste bins provide an economical solution to collecting and disposing of industrial waste. During transport, the forklift tines are positioned fully under the bin ensuring the forklifts full lifting capacity is utilised.
To empty the bin the operator places the front feet of the bin inside the edge of the bulk dumpster, then drive backwards until the tines clear the pivot point and then raise to allow the bin to tip forward. Available in either painted or zinc plated finish.
• Safe Working Load: 1000 kg
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: NSD6: 380 mm NSD9 – NSD18: 635 mm
Options Available:
• Crane Lugs
• Drain Valve & Strainer
• Cast Iron or Rubber Wheels
TypeCapacity (cu. m)
Length (mm)
Width (mm)
Height (mm)
Unit Weight
(kg)
NSD 6 0.7 1425 600 1000 185
NSD 9 1.0 1425 900 1000 200
NSD 12 1.35 1425 1200 1000 215
NSD 15 1.7 1425 1500 1000 240
NSD 18 2.0 1425 1800 1000 260
HEIGHT
LENGTH 70
Stackable
NSD 12 + Wheels & Lugs NSD 12
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type SSD Tipping Bin
A low profile, compact bin for use in confined areas. Well suited to production machinery such as punching machines for the collection of slugs etc. Heavy duty construction with self dumping ability, the forklift operator empties the bin without leaving the drivers seat. Available in either painted or zinc plated finish.
• Safe Working Load: 1000 kg
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 405 mm
• Bin Width: 710 mm
Options Available:
• Crane Lugs
• Drain Valve & Strainer
• Cast Iron or Rubber Wheels
Type Capacity (cu. m) Width (mm) Length (mm) Height (mm)Unit Weight
(kg)
SSD 3 0.2 710 1185 400 80
SSD 4 0.3 710 1245 500 90
SSD 5 0.4 710 1300 600 100
SSD 6 0.5 710 1360 700 110
LENGTH 95
HEIGHT
SSD 3
SSD 6 Stacked
SSD 4 + Wheels
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type JSD Tipping Bin
These are bulk capacity bins for heavy waste, with models available up to 5.4 cubic metres. Manufactured from 5mm plate and channel reinforcement, these bins have an SWL of 3000kg.
The JSD bins are fitted with oversize fork pockets to suit large forklifts. They are a self dumping bin with the operator not having to leave the drivers seat during the tipping cycle. Enamel paint finish.
• Safe Working Load: 3000 kg
• Fork Pocket Size: 180 mm x 80 mm
• Fork Pocket Centres: 950 mm
Options Available:
• Crane Lugs
• Drain Valve & Strainer
Type Capacity (cu. m) Width (mm) Length (mm) Height (mm)Unit Weight
(kg)
JSD 18 3.2 1910 1900 1125 850
JSD 24 4.3 2510 1900 1125 950
JSD 30 5.4 3110 1900 1125 1050
HEIGHT
LENGTH 35
JSD 18
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type CSD Tipping Bin
The economical CSD bin is a self dumping bin suitable for most waste handling applications. This bin is supplied standard with 4 crane lugs and upending lugs under.
It is also fitted with a drain plug and wheel brackets (wheels not supplied unless ordered). Being a nesting bin, it uses a minimum of space for storage and transport. Available in either
painted or zinc plated finish.
• Safe Working Load: 1500 kg
• Crane Lugs fitted standard
• Drain Plug fitted standard
Options Available:
• Rubber or Cast Iron Wheels
TypeCapacity (cu. m)
Width (mm)
Length (mm)
Height (mm)
Fork Pocket Size (mm)
Fork Pocket Centres
(mm)
Unit Weight (kg)
CSD 9 0.95 1010 1570 1010 185 x 75 380 180
CSD 12 1.25 1310 1570 1010 185 x 75 680 205
HEIGHT
LENGTH
CSD 12
CSD 12 + Wheels CSD 12 Stacked
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type NTU Tipping Bin
The NTU heavy duty tip up bin is manufactured from 3mm plate and is fitted with fully reinforced edges. These bins are ideally suited to heavy waste including metal, timber and building site rubble.
The release mechanism is activated by the forklift operator pulling the pull chord from the driver’s seat. The custom built shock absorber prevents impact forces being transmitted to the forklift during emptying. Available in either painted or zinc plated finish.
• Fork Pocket size: 165 mm x 65 mm
• Fork Pocket Centres: 635 mm (NTU 6 – 405 mm)
• Safe Working Load: 1000 kg
Options Available:
• Crane Lugs
• Cast Iron or Rubber Wheels
• Drain Cock & Strainer
Type Capacity (cu. m) Width (mm) Length (mm) Height (mm) Weight (kg)
NTU 6 0.7 600 1420 1000 190
NTU 9 1.0 900 1420 1000 210
NTU 12 1.35 1200 1420 1000 225
NTU 15 1.7 1500 1420 1000 255
NTU 18 2.0 1800 1420 1000 280
HEIGHT
LENGTH 200
NTU 12
NTU 12 Tipped NTU 18
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type TU Tipping Bin
The TU bin is manufactured from 3mm plate and has a lower profile which allows more versatility in confined areas. The pouring lip and smooth formed edges make this bin ideal for food industry applications.
The release mechanism is activated by the forklift operator pulling the draw rope from the driver’s seat. The custom built shock absorber prevents impact forces being transmitted to the forklift during emptying. Available in either painted or zinc plated finish.
• Fork Pocket size: 165 mm x 65 mm
• Fork Pocket Centres: 635 mm (TU6 – 405 mm)
• Safe Working Load: 1000 kg
Options Available:
• Crane Lugs
• Cast Iron or Rubber Wheels
• Drain Valve & Strainer
Type Capacity (cu. m) Width (mm) Length (mm) Height (mm) Unit Weight (kg)
TU 6 0.5 700 1400 915 185
TU 9 0.75 1000 1400 915 200
TU 12 1.0 1300 1400 915 215
TU 15 1.25 1600 1400 915 240
TU 18 1.5 1900 1400 915 260
HEIGHT
LENGTH 200
TU 9 + Wheels
TU 12 + Wheels TU 12 + Crane Lugs
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type JTU Tipping Bin
A larger bin for bulk capacity, the JTU bin is manufactured from 3mm plate and fitted with strengthening ribs. The release mechanism is activated by the forklift operator pulling the draw rope from the driver’s seat. Powerful shock absorbers prevent impact forces being transmitted to the forklift during emptying. Available in either painted or zinc plated finish.
• Fork Pocket size: 165 mm x 65 mm
• Fork Pocket Centres: 735 mm
• Safe Working Load: 1000 kg
Options Available:
• Crane Lugs
• Cast Iron or Rubber Wheels
• Drain Valve & Strainer
• Plastic Lids for JTU 18 only
Type Capacity (cu. m) Width (mm) Length (mm) Height (mm) Unit Weight (kg)
JTU 18 2.25 1900 1460 1100 270
JTU 24 3.0 2500 1460 1100 310
HEIGHT
LENGTH 200
JTU 18 + Plastic Lids
JTU 24 + Crane Lugs
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type ROB Rollover Bin
The ROB bin has a smooth tipping action with minimal impact when emptying. The cut away front lip makes this style of bin ideal for tipping liquid product. To tip, the operator simply pulls the handle via a draw rope without leaving their seat. Available in either painted or zinc plated finish.
• Fork Pocket size: 165 mm x 65 mm
• Fork Pocket Centres: 625 mm
• Safe Working Load: 1000 kg
Options Available:
• Crane Lugs
• Cast Iron or Rubber Wheels
• Drain Valve & Strainer
Type Capacity (cu. m) Width (mm) Length (mm) Height (mm)Unit Weight
(kg)
ROB 9 0.90 1050 1500 1095 210
ROB 12 1.15 1350 1500 1095 225
ROB 15 1.40 1650 1500 1095 255
ROB 18 1.70 1950 1500 1095 280
LENGTH155
HEIGHT
ROB 9
ROB 9 + Wheels
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Forklift Tipping Bins
Type SROB Roll Sideways Bin
Sideways discharge bin with the ability to tip in either direction. Fork pockets are provided for end or sideways lifting and tipping. This bin is ideally suited to the food industry. Available in either painted or zinc plated finish. Stainless Steel also available on request. Wheels fitted as standard.
• Safe Working Load: 600 kg
• Fork Pockets: 140 mm x 60 mm
• End Fork Pocket Centres: 450 mm
• Side Fork Pocket Centres: 660 mm
Options Available:
• Crane Lugs
• Drain Plug
TypeCapacity (litres)
Width (mm) Length (mm) Height (mm) Unit Weight (kg)
SROB 9 400 700 1200 1075 150
SROB 12 550 700 1500 1075 170
Lever Release Forward Tipped
Sideways Tipped
SROB 12
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Drop Bottom Bins
Type DB Drop Bottom Bin
The DB Drop Bottom Bin is a heavy duty unit manufactured from 3mm plate and is reinforced to handle all types of solid waste product.
Able to be transported by either forklift or crane, emptying is carried out by pulling the draw rope handle which allows the floor to drop open from one side, allowing complete emptying. Shock absorbing system removes all impact from forklift or crane during emptying. Enamel painted finish.
• Fork Pocket Size: 160 mm x 65 mm
• Fork Pocket Centres: 684 mm
• Safe Working Load: 1000 kg
Options Available:
• Cast Iron or Rubber Wheels
Type Capacity (cu. m) Width (mm) Length (mm) Height (mm)Unit Weight
(kg)
DB 800 0.8 1200 1025 1045 225
DB 1100 1.1 1200 1025 1345 250
WIDTH LENGTH
HEIGHT
DB 800
DB 800 + WheelsDB 1100
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Hopper Bins
Type HB Hopper Bin
The HB Hopper Bin has a unique “Clam Shell” opening mechanism and is available in three models with different volume capacities as detailed in the table below. The bin is fitted with forklift pockets and is stackable 2 high. Enamel paint finish.
• Fork Pocket size: 160 mm x 65 mm
• Fork Pocket Centres: 625 mm
• Safe Working Load: 1000 kg
Options Available:
• Crane Lugs
• Wheels
Type Capacity (cu. m) Width (mm) Length (mm) Height (mm)Unit Weight
(kg)
HB1-5 0.5 1120 1120 1350 200
HB1-10 1.0 1120 1120 1750 250
HB1-15 1.5 1120 1120 2150 300
HB1-10
HB1-15 + WheelsClam Shell Gate
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Crane Bins
Type SCB Crane Bins
Heavy duty bins suitable for all waste products. Space saving shape allows bins to nest inside each other for transport and storage. Available in 1 tonne capacity made from 3mm plate or 2 tonne capacity made from 5mm plate. Bins are fitted with 2 way entry fork pockets allowing for emptying with forklifts fitted with rotator, as well as being fitted with crane lugs and upending lugs for emptying by crane. Available in either painted or zinc plated finish.
Options Available:
• Cast Iron or Rubber Wheels
• 4 Way Entry Pockets
TypeFork
Pocket Size (mm)
Fork Pocket Centres
(mm)
Capacity (cu. m)
SWL (kg)
Width (mm)
Length (mm)
Height (mm)
Unit Weight
(kg)
SCB 112 165 x 65 585 0.75 1000 1200 1230 895 150
SCB 115 165 x 65 865 1.25 1000 1500 1230 1095 180
SCB 121 165 x 65 865 1.80 1000 2100 1230 1095 230
SCB 212 165 x 65 585 0.75 2000 1200 1230 895 220
SCB 215 165 x 65 865 1.25 2000 1500 1230 1095 290
SCB 221 165 x 65 865 1.80 2000 2100 1230 1095 380
WIDTH
HEIGHT
SCB 212
Crane Emptying Forklift Emptying
SCB 221 Stacked
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Crane Bins
Type SSC Crane Bins
A heavy load capacity storage bin suitable for all manufacturing and construction sites. This versatile bin can be moved by crane, forklift or pallet truck.
Fitted with four way forklift pockets and corner crane lifting lugs, these bins can be stacked 4 high. The bin can be emptied by crane or a forklift fitted with carriage rotator.
Bins have corner drain holes, and are available in either painted or zinc plated finish.
Options Available:
• Cast Iron or Rubber Wheels (not stackable)
• No Drain Holes
Type Capacity (cu. m) SWL (kg) Width (mm) Length (mm)
Height (mm)
Unit Weight (kg)
SSC 400 0.4 2000 1250 1250 475 200
SSC 800 0.8 2000 1250 1250 775 220
SSC 1000 1.0 2000 1250 1250 925 240
SSC 1200 1.2 2000 1250 1250 1075 260
LENGTH / WIDTH
HE
IGH
T
SSC 800 and SSC 1000
4 Way Pockets SSC 1000
SSC 800
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Crane Bins
Type BWB Bulk Waste Bin
The BWB Bulk Waste Bin is ideal for building and mining sites using overhead cranes. This bin is available in three different sizes up to a maximum capacity of 14 tonne SWL. Enamel paint finish.
Note: BWB 50 supplied with lifting chains.
Type Capacity (cu. m) SWL (kg) Width (mm) Length (mm)
Height (mm)
Unit Weight (kg)
BWB 15 1.5 3000 1500 1800 830 560
BWB 30 3.0 5000 1500 2400 905 825
BWB 50 5.0 14,000 2400 3000 960 2560
WIDTH (INSIDE) LENGTH
HE
IGH
TBWB 15
BWB 15BWB 30
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Crane Bins
Type CB 20 Crane Bin
The CB 20 bin is a heavy duty bin suitable for products such as sand, gravel, excavation waste and scrap metal.
The bin comes standard with 6 crane lugs for crane operation, and fork pockets are fitted for transport. Enamel paint finish.
Refer to table for full specifications.
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 725 mm
Type CB 30 Crane Bin
With a larger capacity, the CB 30 has a higher safe working load. Enamel paint finish.
Refer to table for full specifications.
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 725 mm
HEIGHT
LENGTH
Type CB 50 Crane Bin
Manufactured from 6 mm plate and reinforced with additional bracing, the CB 50 is an extremely heavy duty bin for large capacity volumes. Enamel paint finish.
Refer to table for full specifications.
• Fork Pocket Size: 185 mm x 85 mm
• Fork Pocket Centres: 950 mm
Type Capacity (cu. m) SWL (kg) Width (mm) Length (mm)
Height (mm)
Unit Weight (kg)
CB 20 1.25 2000 1170 1924 905 310
CB 30 1.90 3000 1330 2155 1045 390
CB 50 2.0 5000 1660 2495 905 720
LENGTH
HEIGHT
CB 50
CB 20
CB 30
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Waste & Storage Bins Crane Bins
Type NCB Crane Bin
A stackable bin designed for crane lifting and emptying. The stack legs allow for easy handling by forklift. Available in either painted or zinc plated finish.
• Safe Working Load: 1000 kg
Available Options
• Cast Iron or Rubber Wheels
• Drain holes
• Fork pockets
Type CPB 6 Crane Bin
A compact, heavy duty stackable bin ideal in machine shops and foundries for component storage. Manufactured from 3mm plate and fitted with crane lugs, these bins are easily moved by forklift or crane. Available in either painted or zinc plated finish.
• Capacity: 0.23 cubic metres
• Safe Working Load: 1000 kg
• Unit Weight: 80 kg
Available Options
• Cast Iron or Rubber Wheels
TypeCapacity (cu. m)
Width (mm)
Unit Weight
(kg)
NCB 6 0.7 600 160
NCB 9 1.0 900 180
NCB 12 1.35 1200 190
1465
1000
570
980705
NCB 9
CPB 6 Stacked
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)