WASP-NET Home Pioneer of a New Era in Fast EM CAD and Optimization:
-
Upload
norman-lamb -
Category
Documents
-
view
215 -
download
0
description
Transcript of WASP-NET Home Pioneer of a New Era in Fast EM CAD and Optimization:
WASP-NET Home Pioneer of a New Era in Fast EM CAD and
Optimization: Hybrid MM/FE/MoM/FD Technique Four Solvers in one CAD
Tool The High-Speed Exact Hybrid Electromagnetics (EM) Based CAD
and Optimization SoftwareforWaveguide, Coax, Combline and Antenna
Components WASP-Net s top efficiency is based on more than 20 years
of renowned research in advanced computational electromagneticsin
cooperation with the University of Bremen, Germany Since more than
ten years successfully applied by leading space-,
wireless-communication- and microwave-companies to reduce design
time drastically MiGMicrowave Innovation Group Fahrenheitstr. 11, D
Bremen, Germany Phone: Fax: In cooperation with the Microwave
Department, University of Bremen, Germany WASP-NET, MiG GmbH &
Co. KG, registered HR A 22515 H WASP-NET, MiG GmbH & Co. KG,
registered HR A 22515
APPLICATION RANGES Applications Fast exact CAD and optimization of
waveguide components, coax components, combline / interdigital
filters, aperture antennas. Based on the new hybrid MM/FE/MoM/FD
method, WASP-NET combines the high speed of the analytic
mode-matching (MM) method with the flexibility of the space
discretization finite-element (FE), method-of-moment (MoM), and
finite-difference (FD) techniques. WASP-Netis tailored for the fast
CAD and optimization of microwave components and aperture antennas.
Hhhhh CAD and optimization examples include: Filters (waveguide,
combline, interdigital, coaxial, dual-mode, evanescent-mode,
corrugated, waffel-iron, ridged waveguide, dielectric resonator,
folded, cross-coupled filters, etc.) Diplexers, Multiplexers
Couplers Polarizers Phase Shifters Ortho-Mode-Transducers
Transformers Transitions Horn Antennas, Horn Clusters, Slot Arrays
Feed-Networks Hybrid Junctions, also Compensated Compensated Bends
WASP-NET,MiG GmbH & Co. KG, registered HR A 22515 WASP-NET, MiG
GmbH & Co. KG, registered HR A 22515
GENERAL FEATURES WASP-NET - serving for over ten years the leaders
in international space-, communication- and microwave-industry to
cut design time drastically -features a unique comprehensive hybrid
EM CAD software: Combining intellegently mode-matching (MM) /
finite-element (FE), method-of-moment (MoM), and finite-difference
(FD) methods, thus using advantages of all four field solvers in
one single CAD tool: Efficiency of the MM flexibility of the FE,
MoM, FD methods. WASP-NET includes a user-friendly filter wizard
for the fast full-wave filter synthesis. WASP-NET contains three
powerful optimizers, by which also toughest component specs can be
met within shortest optimization time. The efficient evolution
strategy optimizer is capable to find the global minimum. WASP-NET
is embedded in a user-friendly graphical user interface, which
guides the user to intuitively create designs. Help buttons,
immediate graphical visualization of the layout, template wizards,
online help, quick start and tutorial manuals, and an extensive
pool of typicaldesign examples help to quickly design even
complicated components within shortest time dimensions. WASP-NET
see cover feature article, Microwave Journal, September 2002 The
unquestioned advantage of WASP-NETs comprehensive hybrid approach
lies in the immanent opportunity to counter the well known struggle
with limitations of the more common utilizing of single or
restrictednumber of methods WASP-NET CAD and optimization example:
WR-62 E-plane septated T-junction coupled diplexer with compensated
corners References WASP-NET,MiG GmbH & Co. KG, registered HR A
22515 GENERAL BACKGROUND, ACCURACY, SPEED Background, Accuracy,
Speed
WASP-NET GENERAL BACKGROUND, ACCURACY, SPEED Background, Accuracy,
Speed WASP-NET has its origin in the combination of systematically
advancing results of over twenty years of renowned research in fast
computational electromagnetics at the Microwave Department, Prof.
Dr. habil. Fritz Arndt, University of Bremen -documented in more
than 200 publications - with most productive longterm
interrelations with the practical field. WASP-NET based on the
rigorous hybrid mode-matching (MM) / finite-element (FE),
method-of-moment (MoM), and finite-difference (FD) method -
achieves exact accuracy and extremely high efficiency, taking into
account fast changing market dynamics: first pass design success,
drastic reduction in time-to-market C-band waffle-iron filter
fabricated without any tuning screws Fabrication, photograph,
measurements by courtesy of Bosch SatCom, Germany The high
calculation speed and accuracy of WASP-NETtogether with its
powerful optimizers allow the optimization also of toughest
component design problems according to given specs within
shortesttime frames References WASP-NET CPU speed: 0.1 seconds per
frequency point, 209 modes (2GHz P4PC) WASP-NET,MiG GmbH & Co.
KG, registered HR A 22515 WASP-NET FILTER WIZARD Filter Wizard
FILTER WIZARD
WASP-NETs user-friendly full-wave filter wizard yields exact
synthesis results for all typical cavity coupled waveguide filters
within a few minutes Enter desired waveguide and iris / post / or
insert type Enter specs Accurate full-wave synthesis results in
typically 1 5 min. 2 GHz P4 PC Automatic creation of filter
structure Immediate visualization of synthesized filterby WASP-Nets
graphics tool WNVisT ; DXF,STL, SAT, OFF format output for
postprocessing, e.g. milling machines Example: WR-22 seven
resonator filter coupled by one-sided irises with finite radii
WASP-NET synthesis speed: About 2 min. for the complete synthesis,
2GHz P4 PC, analysis a few seconds References WASP-NET,MiG GmbH
& Co. KG, registered HR A 22515 WASP-NET OPTIMIZERS Optimizers
OPTIMIZERS
WASP-NET employs three powerful optimizers: Evolution strategy
(which is capable to find the global minimum), robust direct
search, and gradient optimizers. Demonstration of successful
optimization towards the global minimum by utilizing the efficiency
of the evolution strategy optimizer of WASP-NET Example: WR-34
fifteen double-post coupled resonator filter Posts modeled by a
new, fast MM / Trans-FE method Half of the filter and double-post
element visualized by WASP-NETs graphics tool WNVIsT, giving
instant insight into correctness of input data References WASP-NET
optimization speed: 0.2 seconds per frequency point, all modes up
to TE_27_0, 2GHz P4 PC WASP-NET,MiG GmbH & Co. KG, registered
HR A 22515 Some Dates of Company History
WASP-NET Company History MiG Microwave Innovation Group Some Dates
of Company History 1993 Founding of MiG, proving since then highly
successful on the international space-, wireless-communication and
microwave market, having established many most productive relations
with leading industry 1999 MiG has countered signs of stagnation in
the development of WASP-Net by untertaking farsighted changes in
company structures, institutionalizing a more systematic approach
to technological development, with the widely acknowledged result
of WASP-Net having since then progressed to its characteristic and
pioneering features of comprehensively utilizing hybrid methods,
proving outstanding innovative potential and unique in exploiting
the advantages of four solvers (MM/FE/MoM/FD) within one single CAD
tool. 2001 MiG progressed its formal company status from GbR to
orderly structures of a GmbH & Co. KG, becoming a registered
company (HR A 22515). MiG entering into formal collaboration with
the University of Bremen. 2002 / 2003/ 2004 The impressive number
of WASP-Net usersextends itself reliably on international level
serving us as obligation to deliver to them, also in the years to
come, innovative EM CAD software progressions based on systematic
research efforts of highest qualification MiGs location at Bremen
Innovation and Technology CenterBITZ on the University Campus,
University of Bremen WASP-NET,MiG GmbH & Co. KG, registered HR
A 22515 EXACT FAST CAD METHODS History Methods
Microwave Department, University of Bremen, Prof. Dr.-Ing. habil.
Fritz Arndt 1978 Mode-matching (MM) techniques applied for the CAD
of waveguide transformers 1981, 1982 First MM based CAD and
optimization of waveguide filters (metal-insert, iris-coupled) 1982
First MM based CAD and optimizationof waveguide branch-guide
couplers 1983 First MM based CAD and optimization of waveguide mode
sensors by applying the evolution strategy 1984 First MM based CAD
and optimization of waveguide polarizers 1985 First MM based CAD
and optimization of waveguide filters with improved stopband
behavior, and of waveguide phase shifters 1986 First MM based CAD
and optimization of waveguide narrow-wall couplers 1986 First
hybrid MM / Method-of-Moments (MoM) based analysis of horn clusters
1987 Hybrid MM / Method-of-Moments (MoM) based CAD of waveguide
horn antennas 1987 First MM based CAD and optimization of waveguide
power dividers, fin-line, ridged waveguide transformers 1987 First
MM based CAD and optimization of corrugated low-pass filters 1988
First MM based CAD and optimization of diplexers and multiplexers,
already with strong relations to the industry MM CAD and
optimization of a Satcom C-Band diplexer (1988) fabricated without
tuning screws. Photograph, measurements by courtesy of MBB,
Ottobrunn, Germany References History Methods (cntd)
EXACT FAST CAD METHODS History Methods (cntd) Microwave Department,
University of Bremen, Prof. Dr.-Ing. habil. Fritz Arndt 1990 First
MM based CAD and optimization of elliptic function waveguide
filters with stopband poles 1991 First MM based CAD and
optimization offilters composed of recatngular and circular
waveguide elements 1993 First MM based CAD and optimizationof a
corrugated septum OMT 1993 First MM based CAD and optimization of
multiport coupled waveguide components 1997 Invited MTT paper on
state-of-the-art and ad-vanced CAD with MM and MM/FE hybrid methods
1997 3D finite-difference time-domain method with new subgrid
technique without interpolations 1997 FD-TD method with matrix
pencil technique 1999 3D MM (cavity mode expansion) for general
waveguide multiport junctions 2000 MM/FE method for ridged
waveguide and waffle-iron filters 2001 Hybrid MM/TransFE method
2001 Hybrid MM/FE/FD CAD method 2002 Hybrid MM/FE/MoM/FD CAD method
2003 / 2004 Efficiency improvements by advanced techniques, e.g.
AIM, extension of applications, e.g. large arrays, combline and
ridged wg. components Advanced application of the hybrid MM / FE
method for the fast CAD and optimization of combline filters and
diplexers References SOME HISTORICAL DATES OF THE CAD TOOL
WASP-NET History WASP-NET SOME HISTORICAL DATES OF THE CAD TOOL
2002Release of pioneering WASP-NET hybrid MM/FE/MoM/FD software:
Four solvers within one single CAD tool, combining the speed of MM
with the flexibility of FE/MoM/FD.Inclusion of horn antennas, horn
clusters, wire antennas, fast combline filter and combline diplexer
optimizations, cross-coupled filters Hybrid MM/FE/MoM/FD method
first presented onIEEE MTT-S IMS Microwave Symposium Workshop
1990Fast MM CAD and optimization software run modules for
industrial applications 1993MiGs software:MM building blocks for
circuit based CAD tools,WASP (WAveguide Synthesis Program) MM
filter synthesissoftwarewith own graphical user interface, WASP-NET
(WAveguide Synthesis Program for NETworks) MM CAD software,
WASP-FDTD (3D FD-TD solver) software 2000Release ofWASP-NET hybrid
MM/FE CAD and optimization software; improvements in GUI,first
graphical output. Extended CAD of waveguide components with
arbitrarily shapedcross-sections, such as waffle-iron, ridged
waveguide, evanescent mode and dual-mode filters as well as septum
polarizers. 2001Release of WASP-NET hybrid MM/FE/FD software for
inclusion of arbitrary 3D structures, like coax feeds, combline,
interdigital filters. Inclusion of a new hybrid MM/TransFE method.
Advanced graphical on-line visualization WNVisT and output (DXF,
SAT, STL, OFF). References WASP-NET,MiG GmbH & Co. KG,
registered HR A 22515 WASP-NET, MiG GmbH & Co. KG, registered
HR A 22515
Journal Articles September 2002: Cover Feature Article in MW
Journal Current challenges for EM-based CAD software for microwave
components relate to a new quality of efficiency and speed. The
direction that CAD tools are taking is towards hybrid methods. The
latest WASP-NET CAD and optimization tool addresses these
challenges by utilizing fast hybrid methods and employing all four
common solvers in one single tool, thus exploiting the benefits of
using the efficiency of the mode-matching method together with the
flexibility of the FE/MoM/FD techniques. Microwave Department,
University of Bremen September 2001: GERMANY, University of Bremen,
Microwave Department ... Twenty years of research experience and
cooperation between the University of Bremen and the Microwave
Innovation Group (MiG) has seen the development of the commercially
available WASP-NET, a hybrid MM/FE/FD/MoM CAD software package.
Based on research experience in numerical electromagnetics (EM), in
particular in MM, FE, FD, MoM and related hybrid techniques, the
software package has been created for the robust, fast and rigorous
CAD and optimization of all kinds of waveguide components and
networks to solve tough real-world design problems in realistsic
time dimensions. WASP-NET,MiG GmbH & Co. KG, registered HR A
22515 WASP-NET, MiG GmbH & Co. KG, registered HR A 22515
EVENTS Events WASP-NET and its advanced numerical methods are
presented to our customers, interested engineers and the scientific
community at numerous exhibitions andworkshops 2003 Exhibitions:
MTT-S IMS (Philadelphia, PA), AP-S (Columbus, OH), EuMC (Munich,
Germany) 2004 please see us: JUNE 8-10, MTT-S IMS 2004 (Fort Worth,
TX), Booth # 715 JUNE 21-23, AP-S 2004 (Monterey, CA), Booth # 28
OCTOBER 11-15, EuMW 2004 (Amsterdam, The Netherlands) NOVEMBER
8-10, JINA 2004 (Nice, France) WASP-NET,MiG GmbH & Co. KG,
registered HR A 22515 WASP-NET, MiG GmbH & Co. KG, registered
HR A 22515
EVENTS Events Presentation of WASP-NETs new antenna features: Wire
antennas, corrugated horns, horn clusters, horns with reflector at
JINA 2002 (Nice, France) 2004 please see us: JUNE 8-10,MTT-S IMS
2004 (Fort Worth, TX), Booth # 715 JUNE 21-23, AP-S 2004 (Monterey,
CA), Booth # 28 OCTOBER 11-15,EuMW 2004 (Amsterdam, The
Netherlands) NOVEMBER 8-10,JINA 2004 (Nice, France) WASP-NET,MiG
GmbH & Co. KG, registered HR A 22515 WASP-NET MiG Microwave
Innovation Group
Contact Interested how you can join the many in leading space-,
wireless-communication and microwave industry who continuously
prove a most beneficial utilizing of WASP-Net? CONTACT MiGMicrowave
Innovation Group GmbH & Co. KG Electromagnetic Design + CAD
Software Fahrenheitstr. 11, D Bremen, Germany Phone: Fax:
WASP-NET,MiG GmbH & Co. KG, Dr. Jill Arndt (GM), registered HR
A 22515, U ID DE