WAS Pumps XFP100E CB1 50HZ.pdf
-
Upload
danilo-rocha -
Category
Documents
-
view
99 -
download
3
Transcript of WAS Pumps XFP100E CB1 50HZ.pdf
Letterkenny - WAS Pumps at max head (16.67 l/s @ 14.92m)
XFP100E CB1 50HZ
ABS reserves the right to change any data and dimensions without prior notice and can not be held responsible for the use of information contained in this software.
ABSEL PRO 1.7.2 / 2006-12-21
Operating data specification Flow 16.2 l/s16.2 l/s Head 14.9 m14.9 mStatic head 14.4 m14.4 m Efficiency 55.8 %55.8 %Shaft power 4.26 kW4.26 kW NPSH 1.4 m1.4 mFluid Water Water Temperature 4 °C4 °CNature of system Single head pump Single head pump No. of pumps 1 1
Pump data Type XFP100E CB1 50HZ XFP100E CB1 50HZ Make ABS ABS Series XFP PE1-PE3 XFP PE1-PE3 Impeller Contrabloc Plus impeller, 1 vane Contrabloc Plus impeller, 1 vane N° of vanes 1 1 Impeller size 225 mm225 mmFree passage 80 mm80 mm Suction port DN100 DN100 Discharge port DN100 DN100
Motor data Rated voltage 400 V400 V Frequency 50 Hz50 HzRated power P2 6 kW6 kW Nominal speed 1470 rpm1470 rpmNumber of poles 4 4 Efficiency 89.8 %89.8 %Power factor 0.71 0.71 Rated current 13.6 A13.6 AStarting current 88.3 A 88.3 A Rated torque 39 Nm 39 Nm Starting torque 81.8 Nm 81.8 Nm Degree of protection IP68 IP68 Insulation class H H
ISO 9906 Gr 2
Testnorm
2011-06-29 0 5 10 15 20 25 30 35 40 45 50 Q [l/s]
123456789
101112131415161718192021
H [m]
3
4
5
6
7
P2 [kW]
10203040506070
PE60/4-E-50HZ
69.5%Hydr.eff.
3
3
3
Hydraulic efficiency
1
0 4 8 12 16 20 24 28 32 36 40 44 48 52 Q [l/s]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
H [m]
3
4
5
6
7
P2 [kW]
10
20
30
40
50
60
70
PE60/4-E-50HZ
69.5%Hydr.eff.
3
3
3
Hydraulic efficiency
1
Pump performance curves
XFP100E CB1 XFP100E CB1 50HZ
1470 rpm
FrequencyDischargeDN100
Reference curve
Curve number
4.26 kWRated power Hydraulic efficiency
1.4 m55.8 %14.9 m16.2 l/s
1 kg/dm³Density
NPSHHeadFlow
50 Hz
2011-07-19Date
1.57 mm²/sRated speedTestnorm
ISO 9906 Gr 2 Viscosity
80 mmContrabloc Plus impeller, 1 vane 1 225 mm
Letterkenny - WAS Pumps at max head (16.67 l/s @ 14.92m)
ABS reserves the right to change any data and dimensions without prior notice and can not be held responsible for the use of information contained in this software.
ABSEL PRO 1.7.2 / 2006-12-21
2011-06-29 RevisionSolid size ImpellerN° of vanesImpeller size
Letterkenny - WAS Pumps at min head (16.67 l/s @ 14.4m)
XFP100E CB1 50HZ
ABS reserves the right to change any data and dimensions without prior notice and can not be held responsible for the use of information contained in this software.
ABSEL PRO 1.7.2 / 2006-12-21
Operating data specification Flow 17.1 l/s17.1 l/s Head 14.7 m14.7 mStatic head 8.2 m8.2 m Efficiency 57.4 %57.4 %Shaft power 4.32 kW4.32 kW NPSH 1.4 m1.4 mFluid Water Water Temperature 4 °C4 °CNature of system Single head pump Single head pump No. of pumps 1 1
Pump data Type XFP100E CB1 50HZ XFP100E CB1 50HZ Make ABS ABS Series XFP PE1-PE3 XFP PE1-PE3 Impeller Contrabloc Plus impeller, 1 vane Contrabloc Plus impeller, 1 vane N° of vanes 1 1 Impeller size 225 mm225 mmFree passage 80 mm80 mm Suction port DN100 DN100 Discharge port DN100 DN100
Motor data Rated voltage 400 V400 V Frequency 50 Hz50 HzRated power P2 6 kW6 kW Nominal speed 1470 rpm1470 rpmNumber of poles 4 4 Efficiency 89.8 %89.8 %Power factor 0.71 0.71 Rated current 13.6 A13.6 AStarting current 88.3 A 88.3 A Rated torque 39 Nm 39 Nm Starting torque 81.8 Nm 81.8 Nm Degree of protection IP68 IP68 Insulation class H H
ISO 9906 Gr 2
Testnorm
2011-06-29 0 5 10 15 20 25 30 35 40 45 50 Q [l/s]
123456789
101112131415161718192021
H [m]
3
4
5
6
7
P2 [kW]
10203040506070
PE60/4-E-50HZ
69.5%Hydr.eff.
3
3
3
Hydraulic efficiency
1
0 4 8 12 16 20 24 28 32 36 40 44 48 52 Q [l/s]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
H [m]
3
4
5
6
7
P2 [kW]
10
20
30
40
50
60
70
PE60/4-E-50HZ
69.5%Hydr.eff.
3
3
3
Hydraulic efficiency
1
Pump performance curves
XFP100E CB1 XFP100E CB1 50HZ
1470 rpm
FrequencyDischargeDN100
Reference curve
Curve number
4.32 kWRated power Hydraulic efficiency
1.4 m57.4 %14.7 m17.1 l/s
1 kg/dm³Density
NPSHHeadFlow
50 Hz
2011-07-19Date
1.57 mm²/sRated speedTestnorm
ISO 9906 Gr 2 Viscosity
80 mmContrabloc Plus impeller, 1 vane 1 225 mm
Letterkenny - WAS Pumps at min head (16.67 l/s @ 14.4m)
ABS reserves the right to change any data and dimensions without prior notice and can not be held responsible for the use of information contained in this software.
ABSEL PRO 1.7.2 / 2006-12-21
2011-06-29 RevisionSolid size ImpellerN° of vanesImpeller size
50 HzMotor performance curve
PE60/4-E-50HZ
2011-07-19
Letterkenny - WAS Pumps at max head (16.67 l/s @ 14.92m)
400 V1470 rpm6 kW
Tolerance according to VDE 0530 T1 12.84 for rated power
Moment of inertiaStarting torqueStarting current
Frequency
DateRated voltageNumber of polesNominal speedService factorRated power
88.3 A ABSEL PRO 1.7.2 / 2006-12-21 ABS reserves the right to change any data and dimensions without prior notice and can not be held responsible for the use of
information contained in this software.
0.011 kg m²81.8 Nm
Loading
No load
25 %
50 %
75 %
100 %
125 %
P1 [kW]P2 [kW]
0.43580
1.8541.5
3.4143
5.0384.5
6.6796
8.4727.5
I [A]eff [%]
8.9970
9.21480.92
10.0787.88
11.5389.32
13.5989.83
16.388.53
cosn [rpm]
0.069921500
0.29041492
0.48921484
0.63081476
0.70961468
0.75011460
M [Nm]s [%]
00
9.60.5333
19.31.067
29.111.6
39.032.133
49.052.667
4
20 40 60 80 100 120 P2/P2n [%]0 0
0.1 1.5
0.2 3
0.3 4.5
0.4 6
0.5 7.5
0.6 9
0.7 10.5
0.8 12
0.9 13.5
1 15
1.1 16.5
1.2 18
1.3 19.5
1.4 21
P [kW]
I/In
cos
n/ns
M/Mn
P2
P1
eff
s