WARRANTY PROGRAMS - IKO · IKO L&M WARRANTY PROGRAM FOR BUILT UP ROOFING SURFACING FLASHINGS 5 Year...

Diamond Shield

L&M

WARRANTY PROGRAMSC O M M E R C I A L R O O F I N G

MM1L189 Diamond Shield Warranty Brochure_1213.indd 1 13-12-30 11:37 AM

IKO L&M WARRANTY PROGRAM FOR BUILT UP ROOFING

SURFACING FLASHINGS

5 Year

4 Ply No. 15 Single Pour2 Ply Mod-Bit

3 Ply No. 15 & 180 or 250 Cap4 Ply No. 15

10 Year

4 Ply No. 15 Single Pour 2 Ply Mod-Bit

4 Ply Type IV Single Pour 2 Ply Mod-Bit

4 Ply Type 6 Single Pour 2 Ply Mod-Bit

15 Year

1 Ply 95 or 180 & 3 Plies Type IV Single Pour 2 Ply Mod-Bit

1 Ply 95 or 180 & 3 Plies Type 6 Single Pour 2 Ply Mod-Bit

20 Year

1 Ply 180 & 4 Plies of Type IV Single Pour 2 Ply Mod-Bit

1 Ply 180 & 4 Plies of Type 6 Single Pour 2 Ply Mod-Bit

** Flashings are 2 Ply Polyester or Composite

IKO L&M WARRANTY PROGRAM FOR MOD-BIT ROOFING

BASE SHEET CAP SHEET

10 Year

95 180 or 250 or ArmourCool or Prevent or HD Cap

180 180 Base with Pour & Gravel

15 Year

180 250 or ArmourCool or Prevent or HD Cap

HD 250 or ArmourCool or Prevent or HD Cap

Fast-N-Stick 250 or ArmourCool or Prevent or HD Cap

ArmourBond (Flash or 180) 250 or ArmourCool or Prevent or HD Cap

ArmourVent 250 or ArmourCool or Prevent or HD Cap

Cold Gold Base 250 or Prevent

20 Year

180 250 (5.0) or ArmourCool or Prevent or HD Cap

HD 250 (5.0) or ArmourCool or Prevent or HD Cap

Fast-N-Stick 250 (5.0) or ArmourCool or Prevent or HD Cap

ArmourBond 180 250 (5.0) or ArmourCool or Prevent or HD Cap


Limited Labour and Membrane

Warranty (L&M)

This limited warranty is applicable to

commercial systems installed by an

IKO Registered Roofing Contractor

on commercial / industrial buildings.

The L&M is not pro-rated and covers

manufacturing defects resulting in

roof leaks and has a non-prorated

labour inclusion for IKO to pay for the

repair / replacement of the defective

material. To obtain an L&M warranty the

contractor must be an IKO Registered

Roofing Contractor and possess current

liability insurance. The contractor

should completely fill-out the limited

warranty application and submit it to

IKO Technical Services / Commercial

Warranties for processing.


IKO DIAMOND SHIELD WARRANTY PROGRAM FOR BUILT-UP ROOFING

SURFACING FLASHINGS

10 Year

4 PlyType IV Single Pour 2 Ply Mod-Bit

4 Ply Type 6 Single Pour 2 Ply Mod-Bit

15 Year

1 Ply 95 or 180 & 3 Plies Type IV Single Pour 2 Ply Mod-Bit

1 Ply 95 or 180 & 3 Plies of Type 6 Single Pour 2 Ply Mod-Bit

20 Year

1 Ply 180 & 4 Plies Type IV Single Pour 2 Ply Mod-Bit

1 Ply 180 & 4 Plies of Type 6 Single Pour 2 Ply Mod-Bit


IKO DIAMOND SHIELD WARRANTY PROGRAM FOR MOD-BIT ROOFING

BASE SHEET CAP SHEET

10 Year

95 180 or 250 or ArmourCool or Prevent or HD Cap

180 180 Base with Pour & Gravel

15 Year

180 250 or ArmourCool or Prevent or HD Cap

HD 250 or ArmourCool or Prevent or HD Cap

Fast-N-Stick 250 or ArmourCool or Prevent or HD Cap

ArmourBond (Flash or 180) 250 or ArmourCool or Prevent or HD Cap

ArmourVent 250 or ArmourCool or Prevent or HD Cap

Cold Gold Base 250 or Prevent

20 Year

180 250 (5.0) or ArmourCool or Prevent or HD Cap

HD 250 (5.0) or ArmourCool or Prevent or HD Cap

Fast-N-Stick 250 (5.0) or ArmourCool or Prevent or HD Cap

ArmourBond 180 250 (5.0) or ArmourCool or Prevent or HD Cap


Diamond Shield Limited Warranty

The Diamond Shield Limited Warranty

is applicable to commercial systems

installed on a commercial / industrial

building by an IKO Registered Roofing

Contractor with current liability

insurance. The Diamond Shield Warranty

is not pro-rated and covers repair or

replacement of the IKO commercial /

industrial roofing products without

cost to the Owner. Please refer to the

Diamond Shield Limited Warranty or

contact your local IKO representative

for information on the supporting

documentation required for warranty

issuance. A Diamond Shield Limited

Warranty is assessed a fee based on

roof size and warranty term requested.

Please refer to a sample copy of the

Diamond Shield Limited Warranty for

further information.

Note: The coverage is not prorated. (reference Canadian Commercial & Industrial Limited Warranty

Chart for details) The Diamond Shield application should be sent to IKO at least two weeks prior to

job commencement and include a copy of the roof schematic, roof details (flashings, penetrations etc.)

and written specification to ensure that the proposed system complies with IKO requirements.

DIAMOND SHIELD WARRANTY FEES

TERM FEES

5 Years $ 0.06 / sq.ft. min. $ 600.00

10 Years $ 0.11 / sq.ft. min. $ 900.00

15 Years $ 0.15 / sq.ft. min. $ 1,200.00

20 Years $ 0.20 / sq.ft. min. $ 2,000.00


Thank you for considering IKO Premium Roofing products.

For additional information on IKO’s full line of superior Commercial/Industrial Roofing and Waterproofing products

please call: 1-855-IKO-ROOF (1-855-456-7663), or visit our web site at: www.iko.com

Note: The information in this document is subject to change without notice.

IKO assumes no responsibility for errors that may appear in this document.

© Copyright 12/13 · MM1L189

IKO offers a range of commercial roofing warranties from pro-rated Limited Material Warranties

to Diamond Shield Limited Warranties which cover materials and workmanship.

The Limited Material Warranty is obtainable through dealers, and only requires the contractor’s

signature to be valid.

The Limited Labour and Membrane Warranty and the Diamond Shield Limited Warranty require

the contractor’s company to be an IKO Registered Roofer. Information on registration procedures

and required training programs can be obtained from your roofing products distributor, or your

IKO Representative.

Please ask your IKO Technical Service Manager for specific information and processing details for the

level of warranty coverage you require.

Correspondence and questions should be directed to:

IKO Technical Services

Commercial Warranties

80 Stafford Drive, Brampton, ON

Phone: 1-888-766-2468

email: [email protected]

IKO Commercial Roofi ng Warranties:

Application for Limited Diamond Shield Warranty

1. ___________________________________________________________________________ Ph. ______________________________ 2. __________________________________________________________________________________ ____________________________ 3. ____________________________________________________________________________ 4. _____________________________________________________________________ __________________ 5. _____________________________________________________________________ ______________________________ 6. __________________________________________________________________________________ _____________________________ 7. _______________________________________________________________________________________________________________ 8. _____________________________________________________________________________________________________________ 9. __________________________________________________________________________________________________________________ 10. ______________________________________________________________________________________________________ 11. _________________________________________________________________________ ______________________________ 12. ___________________________________________________________________________________ _____________________________ 13. __________________________________________________________________________ _____________________________ 14. __________________________________________________________________________________ _______________________________

15. __________________________________________________ _____________________________________ _______________________________________________________ ______________________________

New Construction Re-cover (no tear-off) Complete tear-off Partial tear-off (explain with cover letter)

Steel Structural Concrete Wood Plank Plywood Other: _________________ Gauge, PSI, Thickness: __________________

Fibreglass Perlite Fibreboard Isocyanurate Other (specify): _____________________ Thickness: __________________

: EPDM BUR ( gravel smooth) Coal Tar Pitch Mineral Cap Sprayed Urethane Other (specify) __________________

_______________________________ None IKOTherm None ________________ _____________________________________________________________________________________________

Isocyanurate Expanded Polystyrene Fibreglass Perlite Extruded Polystyrene Composite Type X Gypsum

Other (specify): ______________________________________________________________ CoverShield Protectoboard None

Manufacturer ___________________________________ Fibreboard Perlite Fibreglass Other (specify) _______________

(if applicable): Asphalt Adhesive Mechanically Fastened (accepted fasteners) Fastening Rate: _____________________

Attachment (if applicable): Asphalt Adhesive Mechanically Fastened (accepted fasteners) Fastening Rate: ____________________

_____________________________ __________________________ ____________________ IKO Other (specify) __________________________________ Type I Type II Type III

________________________________________________________________ _______________________________________________________________________________________________________________

(e.g. Modiflex MF-95-FS): _________________________________________________________________________________________ (e.g. Type IV Glass Ply): ______________________________________________________________________________________ (e.g. Torchflex TP-250-CAP): ___________________________________________________________________________________

(e.g. Armourbond Flash): ______________________________________________________________________________________________ (e.g. Torchflex TP-180-CAP): ____________________________________________________________________________________________

: Manufacturer: __________________ Type: _________________ ___________________ lbs./sq. ft. ______________ (MGR) (Size and number): _________________________________________________________________________________

43. Other products used, not listed above (eg. Primers, bitumen, cafts, etc.): ____________________________________________________________________ I understand that this warranty will be null and void if any of the information above is inaccurate. By signing this application form, I hereby acknowledge that I have read, understood, and complied with the terms and requirements of the IKO Limited Warranty being applied for. I further acknowledge that for DSLW’s I am responsible for any workmanship deficiencies occurring in the initial 2 years of warranty coverage, and all workmanship deficiencies for all other IKO warranties.

Officer: ____________________________________ Date: ______________________________________ IKO Sales Rep: _____________________________ Roof Accessibility: No Ladder Needed Ladder at Job Site Ladder will be provided by roofing contractor

Project Starting Date: ___________________ Approximate Project Completion Date: ____________________ Warranty Period applied for: __________________ mm/dd/yyyy mm/dd/yyyy years


WARRANTY PROGRAMS - IKO · IKO L&M WARRANTY PROGRAM FOR BUILT UP ROOFING SURFACING FLASHINGS 5 Year...

Documents

Transcript of WARRANTY PROGRAMS - IKO · IKO L&M WARRANTY PROGRAM FOR BUILT UP ROOFING SURFACING FLASHINGS 5 Year...