Warehouse Pricing TX - SSG Texas · 2020. 8. 28. · Stocking Warehouse and Factory Representatives...

Stocking Warehouse and Factory Representatives For:

Texas Warehouse PricingPricing Eff ective May 2020 • Pricing Subject To Change Without Prior Notice

855-738-3835 Toll Free • Phone 817-275-3070 • Fax 817-275-3068• Website: www.ssg-texas.com

Pricing Eff ective May 2020 • Pricing Subject To Change Without Prior Notice

835 Toll Free • Phone 817-275-3070 • Fax 817-275-3068• Website: www.ssg-texa

DFW Warehouse2020 Exchange DriveArlington, TX 76011

Houston Warehouse423 Blueberry StreetHouston, TX 77018

2020 Exchange Drive Arlington, Texas 76011• Phone 817-275-3070 • Fax 817-275-3068 • Website: www.ssg-texas.com

Texas Warehouse • Pricing Effective May 2020

CUSTOMER SERVICEToll Free: 855-738-3835 • Offi ce Phone: (817) 275-3070 • Fax: (817) 275-3068

Email orders to: [email protected]

Brad Shuck - Inside SalesCustomer Service - Arlington Warehouse

[email protected] ce Phone: (817) 275-3070 x 223

SSG Texas is proud to represent these fi ne manufacturers of Division 8 & 10 products

CHICAGO BULLET PROOF

COMMERCIAL WASHROOM EQUIPMENT COMPANY INC.

Greg Shuck - [email protected]

Offi ce Phone: (817) 275-3070 x 221Cell Phone: (972) 880-1677

Darrell Hicks, AHC - Outside Sales(Louisiana, Mississippi,

Arkansas, West Tennessee)[email protected] Phone: (972) 207-6366

Brett Banta - Outside Sales (South Texas)

[email protected] Phone: (504) 473-2243

Amy Shuck - Offi ce [email protected]

Offi ce Phone: (817) 275-3070 x 222Fax: (972) 602-3068

Brian Dunn - Inside Sales/Customer Service Houston Warehouse

[email protected] Phone (832) 831-6672

Brad Shuck - Outside Sales(West Texas / Oklahoma) [email protected] Phone (817) 269-5523

You’ve trusted SSG Texas for your quick ship hollow metal and hardware needs for years. Now, we are proud to announce the same great service for wood doors!

Although not physically stocked at the SSG Texas warehouses, our wood doors are available for quick ship in as little as 3 days!

(some restrictions apply...please ask!)

For More Information or Pricing, Please Contact Your Local SSG Texas Representative

Greg Shuck - SSG Texas2020 Exchange Drive, Arlington, TX 76011

Toll Free 1-855-738-3835 Fax 817-275-3068www.ssg-texas.com [email protected]

Flush Architectural Grade Doors - Red Oak & Birch, 7 Ply & 5 Ply in 20, 60 & 90 Min. Available up to 3090 & 4080Flush Residential Grade Doors - Hollow Core & Solid Corew/ 20 Min. Available for Most Solid Cores 6’8” & 7’ HeightsMolded Panel Doors - Both Hollow Core & Solid Core w/ 20 Min. Available in Both Textured & Smooth 6 Panel DoorsPrefi nished Residential Grade DoorsResidential Grade Steel & Fiberglass DoorsStile & Rail Doors Available in Primed, Fir, Oak, Maple, Cherry, Mahogany& Other Species As Well As Panel Doors & French DoorsMany Sizes & Styles Available With Wide Stiles for Commercial HardwareWood Door Rabbited Frames and Flat JambsAvailable for Various Wall Thicknesses & Door Sizes20 Min. Wood Jambs & Frame AvailableHinged & Sliding Patio Door Systems Available in Wood, Clad Wood, Steel & Fiberglass

Wood, Aluminum & Vinyl Windows AvailableWood Screen Doors AvailableColumns Available in Wood & FiberglassWood Trim & Door Casing in MDF, Primed Wood, Fingerjoint Pine & HardwoodsPrehanging & Assembly of Wood, Steel & Fiberglass Door UnitsSpecial Door Sizing for Width & HeightComplete Custom Door & Frame ManufacturingFire Labeling of 20, 45, 60 & 90 Min.Machining of Wood Doors for use with Metal FramesFinishing & Painting of Wood Doors & FramesFabrication of Entrance Systems - Both Interior & ExteriorCoordination of Doors, Frames & HardwareWorldwide Packing, Crating & Shipping of all Products

Quick Ship Wood Doors and Prefi nished Steel Frames Now Available from SSG Texas!


2020 Exchange Drive Arlington, Texas 76011 • Phone 817-275-3070 • Fax 817-275-3068 • Website: www.ssg-texas.com

(Min. Order $50 or $8 Service Charge Added)



ITEMS ON THIS PAGE FAX ORDERS TO 817-275-3068MAKE ALL PURCHASE ORDERS OUT TO CAL-ROYAL PRODUCTS

PRICING IS LIST PRICE

(Minimum Order $50 or $8 Service Charge Added)

Additional designs, functions, fi nishes IC Core and additional keyways stocked at California warehouse. Keying other than KD or KA (Keyed-Alike) must be ordered from California warehouse.

ITEM DESCRIPTIONUS26DLIST

PRICE

US10BLIST

PRICE

CGN-00 ENTRANCE $162.45 $170.70

CGN-03 CLASSROOM $167.95 $176.20

CGN04 COMMUNICATING(KEYED DOUBLE CYLINDER) $192.70 $200.95

CGN-05 STOREROOM $162.45 $170.70

CGN-06 VESTIBULE $192.70 $200.95

CGN-07 CLASSROOM INTRUDER $192.70 NON STOCK

CGN-09 INSTITUTION(KEYED DOUBLE CYLINDER) $192.70 $200.95

CGN-20 PRIVACY $151.40 $156.95

GN-30 PASSAGE $123.90 $132.15

GN-40 SINGLE DUMMY $41.30 $44.05

ICCGN-00 ENTRANCE with IC Core $162.45 $170.70

ICCGN-03 CLASSROOM with IC Core $167.95 $176.20

ICCGN-05 STOREROOM with IC Core $162.45 $170.70

GND238 DEAD LATCH 2-3/8” $12.40 $12.40

GENESYS CGN SERIES

Grade 1 Cylindrical Leversets

• Heavy Duty• Hurricane Approved (FL13922)• Clutch Mechanism• Fixed Thru Bolt Installation• 3 ½” Rose• 1 ⅜” to 1 ¾” Door• ASA Strike• Schlage “C” Keyway

* Stocked in DFW and Houston



ITEMS ON THIS PAGE FAX ORDERS TO 817-275-3068 MAKE ALL PURCHASE ORDERS OUT TO CAL-ROYAL PRODUCTS





PRICE

US10BELIST

PRICESL00 ENTRANCE $89.50 $92.80SL01 ENTRANCE PUSH BUTTON $89.50 $92.80CSL00 CLUTCHING ENTRANCE $100.50 $103.80 SL03 CLASSROOM $89.50 $92.80 SL05 STOREROOM $89.50 $92.80 SL20 PRIVACY $74.35 $78.50 SL30 PASSAGE $71.60 $75.75 SL40 SINGLE DUMMY $24.80 $27.55 SL50 EXIT $72.50 $78.85 ULSLD238 DEAD LATCH 2-3/8” $12.40 $12.40 ULSLS238 SPRING LATCH 2-3/8” $12.40 $12.40 ICSL00 ENTRANCE with IC Core $89.50 $92.80 ICSL05 STOREROOM with IC Core $89.50 $92.80 ICSL03 CLASSROOM with IC Core $89.50 $92.80 6PUC 6 PIN NON-KEYED CORES $9.40 NET7PUC 7 PIN NON-KEYED CORES $9.40 NET

PIONEER SL SERIES


• Heavy Duty• Fixed Thru Bolt Installation• Hurricane Approved (FL13922)• 3-5/16” Rose• 1 ⅜” to 1 ¾” Door• ASA Strike• Schlage “C” Keyway


PRICE

US10BLIST

PRICEXP00 ENTRANCE $89.50 $92.80 XP03 CLASSROOM $89.50 $92.80 XP05 STOREROOM $89.50 $92.80 XP20 PRIVACY $74.35 $78.50 XP30 PASSAGE $71.60 $75.75 XP40 SINGLE DUMMY $24.80 $27.55 XP50 EXIT $72.50 $78.85

EXPLORER XP SERIES

• Heavy Duty• 3-5/16” Rose• 1 ⅜” to 1 ¾” Door• ASA Strike• Schlage “C” Keyway• Optional Thru Bolt Installation

PARTS AND ACCESSORIES (XP Series)ULSLD238 UL DEAD LATCH 2-3/8 $12.40 $12.40 ULSLS238 UL SPRING LATCH $12.40 $12.40

UL listed 2 ⅜”, (2 ¼” x 1”) faceplate, if ordered with lock only. Otherwise $11.91 .








ITEM DESCRIPTIONUS32D LIST

PRICETBA00 ENTRANCE $38.15

BA03 CLASSROOM $51.30

BA05 STOREROOM $43.50

BA20 PRIVACY $35.75

BA30 PASSAGE $30.55

BA40 SINGLE DUMMY $13.00

BARRINGTON BA SERIES

Grade 2 Cylindrical Knobsets

• Standard Duty• 3” Rose• 1 ⅜” to 1 ¾” Door Thickness• ASA Strike• Schlage “C” Keyway

UL listed 2 ⅜”, (2 ¼” x 1”) faceplate, if ordered with lock only. Otherwise $11.91 .



PRICESG00 ENTRANCE $68.15 SG03 CLASSROOM $68.15 SG05 STOREROOM $68.15 SG20 PRIVACY $55.75 SG30 PASSAGE $54.55 SG40 SINGLE DUMMY $27.25 SG50 EXIT $54.55 ULHIL238 2-3/8” DEAD LATCH (key functions only) $12.40 ULSLS238 2-3/8” SPRING LATCH (for privacy only) $12.40 ULSHIL238 2-3/8” SPRNG LATCH (for passage only) $12.40

CHALLENGER SG SERIES

• Standard Duty• Optional Thru Bolt Installation• 3” Rose• 1 ⅜” to 1 ¾” Door• ASA Strike• Schlage “C” Keyway








CB160 SERIESITEM DESCRIPTION

US26DLIST

PRICE

US10B LIST

PRICECB160 SINGLE CYLINDER DEADBOLT $37.50 $39.70

Grade 1Heavy Duty Deadbolts

• Maximum Heavy Duty• Available with Interchangeable Core• 1 ⅜” to 2” Door Thickness• Adjustable UL Listed 3 Hour Fire Rating• Schlage “C” Keyway

Grade 2Standard Duty Deadbolts


PRICE

US10B LIST

PRICECRB800 SINGLE CYLINDER DEADBOLT $73.90 $76.10 CRB700 DOUBLE CYLINDER DEADBOLT $92.65 $94.85



CRB800 SERIES

• Standard Duty• Wrought Brass or Stainless Steel Trim• 1 ⅜” to 1 ¾” Door Thickness• Adjustable backset 2 ⅜” - 2 ¾”• Schlage “C” Keyway






T300 SERIES


PRICE

US10B LIST

PRICE

ULT360 SINGLE CYLINDER DEADBOLT $47.85 $51.40

ICULT360 SINGLE CYLINDER DEADBOLTW/ IC CORE $49.55 $53.05



PRICE

US10B LIST

PRICET220 SINGLE CYLINDER DEADBOLT $30.00 $32.15 T330 DOUBLE CYLINDER DEADBOLT $40.00 $42.10

• Standard Duty• Wrought Brass or Stainless Steel Trim• 1 ⅜” to 1 ¾” Door Thickness• Adjustable backset 2 ⅜” - 2 ¾”• Schlage “C” Keyway

T220 SERIES

Grade 3Standard Duty Deadbolts

Grade 2Heavy Duty Deadbolts

• Heavy Duty• Wrought Brass or Stainless Steel Trim• 1 ⅜” to 1 ¾” Door Thickness• Adjustable backset 2 ⅜” - 2 ¾”• Schlage “C” Keyway







REPLACEMENT CYLINDERS• Made to Original Manufacturers’ Keying Specifi cations• Can be keyed with original pins

ILLUSTRATION ITEM# DESCRIPTION KEYED LIST PRICE EA. FINISHKEY-IN-KNOB / LEVER & DEADBOLT CYLINDERS (packed with tailpiece assortment pack)

KKARA-4 6-pin Arrow “A” 5 pin

$14.15 US26D

KKC59-4 6-pin Corbin 60 Russwin 59 5 pin KKCL4-4 6-pin Corbin L1 thru L4 6 pin KKKW5-4 6-pin Kwikset 5 pin KKRD1-4 6-pin Russwin D-1 thru 4 6 pin KKSCC-4 6-pin Schlage “C” 6 pin KKSCE-4 6-pin Schlage “E” 6 pin KKSCF-4 6-pin Schlage “F” 6 pin KKSCP-4 6-pin Schlage C-K 5-pin KKSLA-4 6-pin Sargent “LA” thru “LC” 6 pin KKSRA-4 6-pin Sargent “RA” 6 pin KKWFE-4 6-pin Weiser / Falcon “E” 5 pin KKYA8-4 6-pin Yale 8 (E1R) 5 pin KKYGA-4 6-pin Yale “GA” 6 pin

1-1/4” MORTISE CYLINDERS (packed with Adams Rite and Yale Cams) KMARA-4 6-pin Arrow “A” 5 pin

$19.60 US26D

KMC59-4 6-pin Corbin 60 Russwin 59 5 pin KMCL4-4 6-pin Corbin L1 thru L4 6 pin KMKW5-4 6-pin Kwikset 5 pin KMRD1-4 6-pin Russwin D-1 thru 4 6 pin KMSCC-4 6-pin Schlage “C” 6 pin KMSCE-4 6-pin Schlage “E” 6 pin KMSCF-4 6-pin Schlage “F” 6 pin KMSCP-4 6-pin Schlage C-K 5-pin KMSLA-4 6-pin Sargent “LA” thru “LC” 6 pin KMSRA-4 6-pin Sargent “RA” 6 pin KMWFE-4 6-pin Weiser / Falcon “E” 5 pin KMYA8-4 6-pin Yale 8 (E1R) 5 pin KMYGA-4 6-pin Yale “GA” 6 pin

TAILPIECE ASSORTMENT PACK INCLUDED

ADAMS RITE AND YALE CAMS INCLUDED

ITEM DESCRIPTION ALUM DURON900PBF BARRIER FREE, ADJUSTABLE 1-6 $133.23 $133.23PARTS AND ACCESSORIESHOSRPS/900 SUPER RIGID PARALLEL ARM STOPPER HOLD-OPEN $60.01 $60.01

SPAS900 SUPER RIGID PARALLEL ARM STOPPERNON-HANDED $54.00 $54.00

950 FLAT DROP BRACKET $18.02 $18.02

900 SERIES

Grade 1Door Closers


• All Cylinders drilled for 6 Pins






Additional arms, plated and painted fi nishes available from the California warehouse.

Grade 1Door Closers

ITEM DESCRIPTION ALUM DURO

CR441 BARRIER FREE, ADJUSTABLE 1-6 (EQUAL TO LCN 4041) $196.18 $196.18

PARTS AND ACCESSORIES

CR3077SPASSUPER RIGID PARALLEL ARM STOPPER NON-HANDED (EQUIVALENT TO LCN CUSH-N-STOP (CUSH) ARM)

$54.00 $54.00

CR3049HOSRPSSUPER RIGID PARALLEL ARM STOPPER NON-HANDED.EQUIVALENT TO LCN HOLD-OPEN (H-CUSH) ARM

$60.01 $60.01

CR18PA DROP PLATE FOR PARALLEL ARM MOUNTING TOP RAIL $31.07 $31.07

CR441 SERIES


ITEM DESCRIPTION ALUMDURO

300PCOV ADJUSTABLE 3-6 (EXTERIOR) FULL COVER $98.98300PBFCOV ADJUSTABLE 1-4 (INTERIOR) FULL COVER $98.98PARTS AND ACCESSORIES301/302 HOLD OPEN ARM AND PARALLEL BRACKET $26.10704 FLAT DROP BRACKET $15.02

300 SERIES

ITEM DESCRIPTION ALUM DUROCR801 ADJUSTABLE 1-6 (EXTERIOR/INTERIOR) FULL COVER $136.24 $136.24

CR801 SERIES

ITEM DESCRIPTION ALUMDURO

500-PBF ADJUSTABLE 1-5 WITH BACK CHECK (NO COVER) $93.50PARTS AND ACCESSORIES500COV SLIM PLASTIC COVER $8.09501/502 HOLD OPEN ARM AND PARALLEL BRACKET $26.10704 FLAT DROP BRACKET $15.02

500 SERIES






• ANSI A156.4 Grade 1: UL Listed• Cal-Royal’s fi nest concealed overhead door closer series

meeting the highest industry standards Grade 1.

• UL Listed for fi xed size door closers. ( Grade 1 )UL Listed 10c for adjustable door closers. ( Grade 1 )

• Center Hung Door Application: Double or Single Acting ( applied door stop renders unit Single Acting ). Adjustable “S” type side loading or “A” type, “K” type, and “PT” type end loading arms are available for center pivoted door applications.

• Offset Hung Door Application: Single Acting Offset“JO” and “VO” type top arms are available for butt hungor offset pivoted applications.

• Available with ½”, ¾” long, and 7/8” extended spindles.

FEATURES

FUNCTIONS

• Built-in positive Back Stop and Hold-Open positions are available:

• Handicap (ADA) adjustable spring tensionsavailable for use on center pivoteddoor applications:

• Available also in light, medium, heavy standard Fixed Spring Tensions.

POWER SIZE 1 2 3 4Max Door width [inches (mm)] 31 1/2 (800) 35 7/16 (900) 39 3/8 (1000) 43 5/16 (1100)Max Door weight [lbs (kg)] 220 (100)

105º Back Stop with Hold-Open105º Back Stop - no Hold-Open 90º Back Stop with Hold-Open 90º Back Stop - no Hold-Open

5.0 lb. Opening Force (Center Hung Door)8.5 lb. Opening Force (Center Hung Door)

• Power Adjustable 1-4 ( Grade 1 )• Meets both 5 and 8.5 lbs opening force for ADA• Replacement for International, Calibre,

and CR Laurence

Max. Opening 130º

Max. Opening 130ºLatching Speed adjusting valveClosing Speed adjusting valve

SpeedIncrease

SpeedDecrease

88 SERIES






Specify Arm Package. Arm package complete units come standard with top arm assembly “S” side loading arm or “A”, “K”,and “PT” end loading arm, adjustable dual-purpose bottom pivot set and anchor set with all fasteners (88-PV).

“JO” or “VO” type off set arms are optional, but must be specifi ed. Specify fi nish ALUM or DURO. For optional pivots, suffi x arm type (“S”, “A”, “K” or “PT”) and pivot type (“88-G” or “88-GE”) and after body part #

(eg. 8840S + G) otherwise, shipped with adjustable dual-purpose bottom pivot set and anchor set with all fasteners (88-PV).

List Prices

POWER SIZE SPINDLE OPENING ITEM #

BODY ONLY

ARMS PACKAGE ( “S”, “A”, “K”, “PT” )

ARMS PACKAGE( “JO and “VO” )

LIST PRICE( Per Piece)

LIST PRICE( 1 PC )

1 CASE( 4 PCS )

LIST PRICE( 1 PC )

1 CASE( 4 PCS )

Adjustable 1 - 4ADA 5 lbs( Interior )

ADA 8.5 lbs( Exterior )

1/2”

90º HO 8840

$128.00 $157.00 $152.00

N/A

105º HO 8850

90º NHO 8820

105º NHO 8830

3/4”

90º HO 8809 128.00 157.00 152.00

105º HO 8810 128.00 157.00 152.00

90º NHO 8811128.00 157.00 152.00

105º NHO 8812

7/8”

90º HO 8800 173.00 206.00 200.00

105º HO 8801

173.00 206.00 200.00 90º NHO 8802

105º NHO 8803

Light

1/2”

90º HO 8855

128.00 157.00 152.00 163.00 158.00

105º HO 8856

90º NHO 8857

105º NHO 8858

Medium

90º HO 8859

105º HO 8860 128.00 157.00 152.00 163.00 158.00

90º NHO 8861

128.00 157.00 152.00 163.00 158.00

105º NHO 8862

Heavy

90º HO 8863

105º HO 8864

90º NHO 8865

105º NHO 8866

STOCK ITEM PRICES IN BOLDNON-STOCK ITEMS AVAILABLE WITH FACTORY LEAD TIME AND SUBJECT TO MINIMUM ORDER

88 SERIES Concealed Overhead Door Closers






►PARTS & ACCESSORIES FOR 88 SERIES STANDARD DISCOUNT ONLY

ILLUSTRATION ITEM # DESCRIPTION LIST PRICE UNIT

88-VO ALUM “VO” Type Off set Top Arm Assembly,Surface Type,

7/8” Depth Top Rail

$46.00

Each

88-VO DURO 46.00

88-JO ALUM “JO” Type Off set Top Arm Assembly,Mortise Type,

9/16” Depth Top Rail

43.00

88-JO DURO 43.00

88-S“S” Type Adjustable

Side Loading Top Arm Assembly,1/2” Depth Top Rail

28.00

88-A“A” Type Adjustable

End Loading Top Arm Assembly,1” Depth Top Rail

28.00

88-PT“PT” Type Adjustable

End Loading Top Arm Assembly,7/8” Depth Top Rail

30.00

88-K

“K” Type AdjustableEnd Loading Top Arm Assembly,

5/8” Depth Top Rail28.00

88-PV Adjustable Dual PurposeBottom Pivot Set 24.00

88-G Adjustable Floor MountBottom Pivot Set 28.00

88-GE Adjustable Threshold MountBottom Pivot Set 25.00

88-ANC Standard Anchor Set 9.00

88-FIX Standard Fixed Anchor Set 9.00






Additional sizes, fi nishes, trim designs, IC Core and additional keyways stocked at California warehouse. Keying other than KD or KA (Keyed-Alike) must be ordered from California warehouse.

ITEM DESCRIPTION US32D US10BA9800EO36 RIM EXIT FOR DOORS 36” WIDE $364.60 $406.40AF9800EO36 FIRE RATED RIM EXIT FOR DOORS 36” WIDE $428.85 $460.45 TRIMS AND ACCESSORIES US26D US10B9800NL NIGHT LATCH PULL WITH CYLINDER $83.20 $83.20 9800DTP DUMMY TRIM PULL $65.55 $65.55 98TP00 ENTRANCE THUMBPIECE TRIM $124.80 -ENT00L ENTRANCE LEVER TRIM $120.40 $120.40 ICENT00L BEST, FALCON, SFIC CLUTCH ENTRANCE $120.40 $120.40 STR05L STOREROOM LEVER TRIM $120.40 $120.40 PAS30L PASSAGE LEVER TRIM $120.40 $120.40 NESC9800 RIGID ENTRANCE $150.80 $150.80 NESC9805 RIGID STOREROOM ALWAYS LOCKED $150.80 $150.80 NESC9830 ESCUTCHEON TRIM CLUTCH PASSAGE $150.80 $150.80 HDESC-00 HEAVY DUTY ,CLUTCH ENTRANCE $237.15 -ICHDESC-00 BEST, FALCON, SFIC CLUTCH ENTRANCE $237.15 -

9800 SERIES

Grade 1EXIT DEVICES *Stocked in DFW and Houston

*Stocked in DFW and Houston*Stocked in DFW and Ho

ITEM DESCRIPTION US32D US10BA7700EO36 RIM EXIT FOR DOORS 36” WIDE $464.90 $499.20 AF7700EO36 FIRE RATED RIM EXIT FOR DOORS 36” WIDE $546.00 $584.50 A7760V3684 SURFACE VERTICAL ROD 36” X 84” **SH $608.40 -TRIMS AND ACCESSORIES US26D US10BENT00L ENTRANCE LEVER TRIM $120.40 $120.40 ICENT00L BEST, FALCON, SFIC CLUTCH ENTRANCE $120.40 $120.40 STR05L STOREROOM LEVER TRIM $120.40 $120.40 PAS30L PASSAGE LEVER TRIM $120.40 $120.40 ESC7700 ENTRANCE ESCUTCHEON TRIM $150.80 $150.80 ESC7705 STOREROOM FUNCTION ESCUTCHEON TRIM $150.80 $150.80 ESC7730 ESCUTCHEON TRIM CLUTCH PASSAGE $150.80 $150.80 7700NL NIGHT LATCH PULL WITH CYLINDER $83.20 $83.20 7700DTP DUMMY TRIM PULL $65.55 $65.55 HDESC-00 HEAVY DUTY ,CLUTCH ENTRANCE $237.15 -ICHDESC-00 BEST, FALCON, SFIC CLUTCH ENTRANCE $237.15 -

7700 SERIES

ITEM DESCRIPTION PRIME COATED424 SQUARE STEEL MULLION FIRE RATED APPLICATION $312.00 418 REMOVABLE ALUMINUM MULLION (NON RATED) $260.60 LCKUL424 LOCKABLE, UL-LISTED FIRE EXIT MULLION $508.60ROD96 ALUM ROD ONLY, FOR EXIT DEVICE 96” HIGH $26.00VRRD10 ALUM VERTICAL ROD FOR 10 FT. DOORS $26.00

MULLIONS / EXTENSION RODS






Additional sizes, fi nishes, trim designs, IC Core and additional keyways stocked at California warehouse. Keying other than KD or KA (Keyed-Alike) must be ordered from California warehouse.

ITEM DESCRIPTION ALUMLIST PRICE

US32DLIST PRICE

5000EO36 RIM EXIT FOR DOORS 36” WIDE $135.60 $197.50 5000EO48 RIM EXIT ONLY FOR DOORS 48” WIDE $142.35 -5000V3684 SURFACE VERTICAL ROD 36” X 84” **SH $230.25 -F5000EO36 FIRE RATED RIM EXIT FOR DOORS 36” WIDE $182.30 -F5000V3684 FIRE RATED SURFACE VERTICAL ROD 36” X 84” **SH $296.85 -TRIMS AND ACCESSORIES US26D ALUMCLU6000L LEVER KEYLOCK, “C” KEYWAY WITH CLUTCH $101.95 -5000EOP COVER PLATE - $17.70 5000NL NIGHT LATCH PULL WITH CYLINDER - $46.30 5000DTP DUMMY TRIM PULL - $17.70 8000L RIGID ENTRANCE CYLINDRICAL TRIM $86.85 -8000S RIGID STOREROOM CYLINDRICAL TRIM ALWAYS LOCKED $92.60 -8000PAS PASSAGE CYLINDRICAL TRIM $73.85 -

5000 SERIES

Grade 2EXIT DEVICES

ITEM DESCRIPTION ALUMLIST PRICE

DUROLIST PRICE

A2200EO36 RIM EXIT FOR DOORS 36” WIDE $169.45 $169.45 A2220EO48 RIM EXIT ONLY FOR DOORS 48” WIDE $177.65 -A2260V3684 SURFACE VERTICAL ROD 36” X 84” **SH $273.45 $273.45 AF2200EO36 FIRE RATED RIM EXIT FOR DOORS 36” WIDE $233.75 $233.75 AF2260V3684 FIRE RATED SURFACE VERTICAL ROD 36” X 84” **SH $364.60 -TRIMS AND ACCESSORIES2200NL NIGHT LATCH PULL WITH CYLINDER $52.00 $52.00 2200DTP DUMMY TRIM PULL $27.05 $27.05 NESC2200 RIGID ENTRANCE ESCUTCHEON TRIM $126.90 $126.90 NESC2205 RIGID STOREROOM ESCUTCHEON TRIM ALWAYS LOCKED $126.90 $126.90 NESC2230 PASSAGE ESCUTCHEON TRIM $126.90 $126.90

US26D US10BENT00L ENTRANCE LEVER TRIM $120.40 $120.40 ICENT00L BEST, FALCON, SFIC CLUTCH ENTRANCE $120.40 $120.40 STR05L STOREROOM LEVER TRIM $120.40 $120.40 PAS30L PASSAGE LEVER TRIM $120.40 $120.40

2200 SERIES

Grade 1EXIT DEVICES








Additional sizes, styles and fi nishes stocked at California warehouse.

ITEM DESCRIPTION LISTPRICE EA.

CRHD78112083 CLR GEARED MORTISE CONTINUOUS HINGE HEAVY DUTY 83” $172.43 CRHD78112083 DB GEARED MORTISE CONTINUOUS HINGE HEAVY DUTY 83” $178.72 CRHD78157083 CLR GEARED FULL SURFACE CONTINUOUS HINGE HEAVY DUTY 83” $198.87 CRHD78157083 DB GEARED FULL SURFACE CONTINUOUS HINGE HEAVY DUTY 83” $206.43 CRHD78210083 CLR GEARED FULL SURFACE CONTINUOUS HINGE HEAVY DUTY 83” $206.43 CRHD78210083 DB GEARED FULL SURFACE CONTINUOUS HINGE HEAVY DUTY 83” $213.93 CRHD78210095 CLR GEARED FULL SURFACE CONTINUOUS HINGE HEAVY DUTY 95” $236.62 CRHD78224083 CLR GEARED MORTISE CONTINUOUS HINGE HEAVY DUTY 83” $186.29 CRHD78224095 CLR GEARED MORTISE CONTINUOUS HINGE HEAVY DUTY 95” $213.93

HEAVY WEIGHT CONTINUOUS HINGESCRHD781120

T CONTINUOCRHD781570

US HINGESCRHD782100 CRHD782240

ITEM DESCRIPTION LIST PRICE EA.

TBH30 4-1/2” X 4-1/2” STANDARD WEIGHT, PLAIN BEARING HINGESUS10B US26D NRP US26D USP NRP USP$7.33 $6.00 $6.83 $4.48 $5.20

PLAIN BEARING HINGES

HINGES


BB31 4-1/2” X 4-1/2” STANDARD WEIGHT, BALL BEARING HINGESUS10B NRP US10B US26D NRP US26D NRP US32D USP NRP USP$11.13 $12.65 $9.44 $10.35 $29.65 $6.53 $7.45

BALL BEARING HINGES


NEWSH140 US26D 4-1/2” X 4-1/2” STANDARD WEIGHT ,SPRING HINGES $16.21

STANDARD WEIGHT SPRING HINGES

NEWSH140BB31TBH30


BB5200


BB5200 NRP US26D 4-1/2” X 4-1/2” HEAVY WEIGHT ,BALL BEARING HINGES $22.87






Additional products, styles and fi nishes stocked at California warehouse.

DSHP18 DSLP4WB26 UNDS14

MISCELLANEOUS HARDWARE

ITEM DESCRIPTION US26D LIST PRICE

US32D LIST PRICE

US10BLIST PRICE

MF6341 EXTENSION FLUSH BOLT COMMERCIAL $21.02 NON STOCK $21.89

UL831 HEAVYDUTY EXPOSED SCREW UL-LISTED SURFACE BOLT 8” $16.23 NON STOCK NON STOCK

BKICK1034 10" X 34" KICKPLATE .050” NON STOCK $46.49 $115.04

BKICK834 8" X 34" KICK PLATE .050” NON STOCK $36.96 $92.05

BARM3436 34” X 36” STAINLESS STEEL ARMOR PLATE NON STOCK $125.84 NON STOCK

1001 ADA 4” x 16” SOLID BAR ROUND PULL PLATE 3/4” DIA. NON STOCK $43.03 NON STOCK

PSPL4016 PUSH PLATE SIZE 0.050” X 4" X 16" NON STOCK $9.88 $26.40

PULPL4016 PULL PLATE SIZE 0.050” X 4” X 16" NON STOCK $43.38 $54.23

DPSTRK1 BRASS DUST PROOF STRIKE $16.70 NON STOCK $16.70

ASAST ASA STRIKE $2.43 NON STOCK $3.64

DSLP4 SOLID BRASS DOME STOP LOW PROFILE $5.61 NON STOCK $5.61

DSHP18 SOLID BRASS DOME STOP HIGH PROFILE $6.42 NON STOCK $6.42

WB26 WALL BUMPER SOLID BRASS NON STOCK $2.54 $3.47

UNDS14 UNIVERSAL LOW AND HIGH DOME STOP $8.89 NON STOCK $8.89

MF6341

UL831

PULPL4016 BKICK1034

DPTSTRK1

BARM3436

BKICK834

PSPL4016

ASAST

1001 ADA







Additional products, styles and fi nishes stocked at California warehouse.

ULDV160 970HDCDV-48 LPG2

MISCELLANEOUS HARDWARE

ITEM DESCRIPTION LISTPRICE

M68 MEN WITH BRAILLE PICTOGRAM TEXT $10.24

MH68 MEN/HANDICAP WITH BRAILLE PICTOGRAM $10.24

RS68 UNISEX RESTROOM WITH BRAILLE $10.24

RSH68 UNISEX HANDICAP RESTROOM WITH BRAILLE $10.24

W68 WOMEN WITH BRAILLE PICTOGRAM TEXT $10.24

WH68 WOMEN/BRAILLE PICTROGRAM-HANDICAP $10.24

M68 MH68 RS68 RSH68 W68 WH68

SIGNS

ITEM DESCRIPTION US26DLIST PRICE

US32DLIST PRICE

US10BLIST PRICE

ULDV160 UL LISTED DOOR VIEWER 160 DEGREES $5.15 NON STOCK $5.15

HDCDV-48 HEAVY DUTY ADJUSTABLE CHAIN DOOR STOP $18.66 NON STOCK NON STOCK

LPG2 LATCH GUARD PROTECTOR ALUM $8.43 NON STOCK DURO $8.43

970 SEX BOLTS FEMALE PART ONLY - 1/4” - 20 (SET OF 4) $4.27

* Stocked in DFW




ITEMS ON THIS PAGE FAX ORDERS TO 817-275-3068 MAKE ALL PURCHASE ORDERS OUT TO DKS



Additional sizes and options stocked at DKS’ California warehouse.

CAL ROYAL PRODUCTS

LITES AND LOUVERS

SVL SERIES, VISION LITE LOW PROFILE

ITEM #SIZE

(DOOR CUTOUT)Width x Height

PCS/CTN LIST PRICE

SVL520 5" x 20" 6 $68.15 eachSVL535 5" x 35" 6 $80.85 SVL624 6" x 24" 6 $77.39 SVL627 6" x 27" 6 $73.92 SVL630 6" x 30" 6 $82.01 SVL722 7" x 22" 6 $68.15 SVL830 8" x 30" 6 $80.85 SVL832 8" x 32" 6 $80.85 SVL836 8" x 36" 6 $91.24

SVL1212 12" x 12" 10 $47.35 SVL1818 18" x 18" 2 $84.32 SVL2424 24" x 24" 4 $86.63 SVL2430 24" x 30" 4 $94.71 SVL2436 24" x 36" 2 $103.95 SVL2460 24" x 60" 2 $194.04 SVL2464 24" x 64" 2 $220.61 P R I C E S D O N O T I N C L U D E G L A S S

► 45-180 Minute Fire Rated Steel Vision Lites for 3/16” to 1/4” Glass► Low Profi le Beveled Vision lite for Fire Rated Doors► Frame has Single-side Fasteners► 20 Gauge Cold Rolled Steel► Designed for use with 1-3/4” doors only► Baked on powder coat fi nish► Color: Standard Bronze► Fasteners: #8 x 7/8” Flathead phillips head SMS




ITEMS ON THIS PAGE FAX ORDERS TO 817-275-3068MAKE ALL PURCHASE ORDERS OUT TO DKS




CAL ROYAL PRODUCTS

LITES AND LOUVERSGLASS REPLACEMENTS / ACCESSORIES

GLASS SIZES WS(1/4") TEMP (1/4")4" x 34" $ 110.88 each $ 42.74 each5" x 26" $110.88 $42.746" x 21" $110.88 $42.747" x 29" $161.70 -- 7" x 31" $173.25 $42.747" x 35" $189.42 $42.7411" x 11" $110.88 $42.7423" x 23" $410.03 $76.2323" x 29" $516.29 $98.1823" x 63" $1,158.47 $210.21

TEMP (Tempered Glass): Heat-strengthened glass and cannot be cut after manufacturing. Fire Rating: None. Clear wire free glass recommended for non fi re rated applications. Use of glazing compound or glazing tape on both sides of glass is recommended to minimize breakage. Size: Minimum 2” x 2”, max sheet size: 88” x 118”.WS (Superlite I-W Wired Glass): 20 ga CRS (Cold Rolled Steel) beveled vision lite, 1/4” wired glass with fi lm. Glass is UL labeled standard. Fire Rating: 20 minutes to 90 minutes. Install in fi re listed and labeled vision frames. Use of glazing compound or glazing tape on both sides of glass is recommended to minimize breakage. Size: Minimum 4” x 4”, max rated size: 36” x 84”.

VLV, INVERTED Y-BLADE LOUVERS90 Minute Fire Rated Steel Louvers

► For use in Fire Rated door applications under positive and neutral pressure Intertek testing certifi cation in compliance to NFPA 252 (2000), UL 10C (2009), NFPA 252 (2012), CSI CODE 089000 Louvers & Vents► 18 Gauge cold rolled steel frame and blades►Mitered welded corner frame construction► Reverse “Y” blades are frame supported at 1” increments, with blocked vision design► Single side mounting for non corridor exposure with fastening screws included► Designed for use with 1-3/4” doors only► Baked on powder coat fi nish► Color: Standard Bronze► Fasteners: Phillips head screws #8 x 3/4”

ITEM # SIZE(DOOR CUTOUT) PCS/CTN LIST PRICE

VLV1212 12" x 12" 4 $85.47 eachVLV1812 18" x 12" 2 $102.79 VLV1818 18" x 18" 2 $121.28 VLV2412 24" x 12" 2 $121.28 VLV2418 24" x 18" 2 $131.67 VLV2424 24" x 24" 1 $169.79 VLV2460 24" x 60" 2 $488.57 VLV2464 24" x 64" 2 $503.58


ITEM DESCRIPTION LIST PRICE

GT Black Glazing Tape 1/16” x 3/8” x 150’ $33.00







CR 2000 SERIES SADDLE THRESHOLDS

ITEM # SIZE FINISH LIST PRICE PER EA. / LENGTH PCS/ MC UNIT36” 48” 72”

CR2715 ½” H x 5” W ALUM 27.90 37.25 55.80 20 EACHDURO 40.60 54.20 81.20

1/2”

CR 3700 SERIES SADDLE THRESHOLDS

ITEM # SIZE FINISH LIST PRICE PER EA. / LENGTH PCS/ MC UNIT36” 48” 72”

CR3715 ¼” H x 5” W ALUM 27.95 37.25 55.90 20 EACHDURO 40.65 54.25 81.30

5”1/4”

DRIP CAPITEM # SIZE FINISH LIST PRICE PER EA. / LENGTH PCS

/ MC UNIT40” 52” 76”CR4462 2 ½” ALUM 13.50 18.05 26.95 50 EACHDURO 18.90 22.70 33.95

Packaging includes:• Fasteners: #10 x ¾” wood screwsNote: Suggested length should be 4” longer than width of door. Allow 2” distance on each end for maximum cover.

5”







DOOR BOTTOM SWEEPS

ILLUSTRATION ITEM # DESCRIPTION FINISHLIST PRICE EACH /

LENGTH PCS / MC UNIT

36” 48”

BTSR-108

Door Bottom Sweep with Rain Dripmade of Extruded Aluminum Retainerand Vinyl InsertWidth: 9/16” (14.3mm)Profi le Height: 1 7/16” (36.6mm)Total Height: 2” (51.3mm)

AV 12.80 17.00

20 Ea.

DV 16.90 22.60

BTS-103

Door Bottom Sweep made ofExtruded Aluminum Retainerand Vinyl InsertWidth: ¼” (6.4mm)Profi le Height: ⅞” (22.2mm)Insert Height: 1” (25.4mm)Total Height: 1 ⅞” (47.6mm)

AV 8.90 11.90

20 Ea.

DV 12.20 16.20

BTN-112

Door Bottom Sweep made ofExtruded Aluminum Retainerand Vinyl Insert Width: ¼” (6.4mm)Profi le Height: 1 ¼” (31.8mm)Total Height: 1 11/16” (42.9mm)

AN 13.40 17.80

20 Ea.

DN 17.50 23.40

Packaging includes: • 1 unit of Door Bottom Sweep• #6 x ⅝” PPHSMS ( Standard )

Testing/Ratings:

ADHESIVE WEATHERSTRIPSILLUSTRATION ITEM # DESCRIPTION FINISH LIST PRICE EACH /

LENGTHPCS / MC UNIT

C-880Silicone Adhesive Weatherstrip with 3M Adhesive tapeWidth: ½” (12.7mm)Height: ¼” (6.35mm)

B17’ 25’

10 Ea.24.10 36.40

B 204’ 510’ *1 Ea.282.20 705.50

Packaging includes: • Cleaner• UL sticker label• *1 = 1 Roll

NOTE:Model C880 is fi re rated UL10C, UL Sound, Smoke, Wind and BHMA Certifi ed

Testing/Ratings:







BRUSH WEATHERSTRIPS

ILLUSTRATION ITEM # DESCRIPTION FINISHLIST PRICE EACH /

LENGTH PCS / MC UNIT

36” 48”

BW-302

Nylon Brush with Extruded Aluminum Seal RetainerWidth: ¼” (6.4mm)Profi le Height: ¾” (19.1mm)Insert Height: ⅝” (15.9mm)Total Height: 1 ⅜” (35mm)

A 12.20 16.20

20 Ea.D 16.00 21.40

BW-305

Nylon Brush with Extruded Aluminum Seal RetainerWidth: ¼” (6.4mm)Profi le Height: ⅞” (22.2mm)Insert Height: 1” (25.4mm)Total Height: 1 ⅞” (47.6mm)

A 19.00 25.30

20 Ea.D 24.60 32.90

Packaging includes: • 1 Unit of Brush Weatherstrip • #6 x ⅝” PPHSMS ( Standard )

Testing/Ratings:

Testing/Ratings:

PERIMETER GASKETINGITEM # IMAGE AND DESCRIPTION FINISH LIST PRICE EACH / LENGTH PCS /

MC UNIT36” x 84” 48” x 84” 48” x 96” 72” x 84” 72” x 96”

PG-603 Aluminum Channel with Vinyl InsertWidth: ¼” (6.4mm)Profi le Height: ⅞” (22.2mm)Total Height: 1 ⅛” (28.6mm)

AV 28.30 29.90 33.30 33.30 36.60

25 Ea.

DV 50.50 53.50 59.40 59.40 65.30

Packaging includes: • 1 piece Jamb Header• 1 piece Strike Jamb• 1 piece Hinge Jamb• #6 x ⅝” PPHSMS ( Standard )

NOTE:Model PG-603 is fi re rated UL10C, UL Sound, Smoke, Wind and BHMA Certifi ed



TX Warehouse DiscountsItems listed on the follow pages represent items stocked in the DFW & Houston

Warehouses. Pricing is subject to change without notice.

TEXASWAREHOUSEMULTIPLIERS

Quantity Doors Frames1-9

10-1920+

Pricing Subject To Change. Please Call For Current Pricing.PALLETS USED FOR LTL FREIGHT (one charge regardless of # pallets) ADD $40

CALIFORNIAWAREHOUSEMULTIPLIERS

Quantity Doors Frames1-20

21-4041-8080+

Pricing Subject To Change. Please Call For Current Pricing.

CA Warehouse DiscountsPlease use the follow multipliers for order shipping from the CA warehouse.

Pricing is subject to change without notice.







HINGE CROSS-REFERENCE CHART

3068 Door 3070 DoorA B C E A B C E

DKS 7 3/8 37 5/16 67 1/4 38 7/16 7 3/8 39 5/16 71 1/4 42 7/16Amweld 7 3/8 37 5/16 67 1/4 38 7/16 7 3/8 39 5/16 71 1/4 42 7/16Ceco 6 5/8 37 5/8 68 5/8 36 15/16 6 5/8 39 5/8 72 5/8 40 15/16Curries 4 7/8 35 1/8 65 3/8 38 3/4 4 7/8 37 1/8 69 3/8 42 3/4Dean Steel 4 7/8 35 1/8 65 3/8 38 7/16 4 7/8 37 1/8 69 3/8 42 7/16Mesker 4 7/8 35 1/8 65 3/8 38 7/16 37 1/8 37 1/8 69 3/8 42 7/16Republic 7 3/8 37 5/16 67 1/4 38 7/16 9 3/8 39 5/16 69 1/4 42 7/16New Republic 4/ 7/8 35 1/8 65 3/8 38 7/16 4 7/8 37 1/8 69 3/8 42 7/16Steelcraft 7 3/8 37 5/16 67 1/4 38 7/16 7 3/8 39 5/16 71 1/4 42 7/16







PALLETS USED FOR LTL FREIGHT (one charge regardless of # pallets) ADD $40

MAX DUTY DOORS* Stocked in DFW only

Part Number Size Description List PriceMD2868 2868 Max-Duty Door $ 640MD3068 3068 Max-Duty Door $ 640

Hand Part Number Size Description List PriceRH MD4086 2868 5 ³⁄ ” 12 Gauge Frame w/ 3DL & ASA $ 386LH MD4087 2868 5 ³⁄ ” 12 Gauge Frame w/ 3DL & ASA $ 386RH MD4011 2868 8 ³⁄ ” 12 Gauge Frame w/ 3DL & ASA $ 498LH MD4012 2868 8 ³⁄ ” 12 Gauge Frame w/ 3DL & ASA $ 498

Hand Part Number Size Description List PriceRH MD4100 3068 5 ³⁄ ” 12 Gauge Frame w/ 3DL & ASA $ 386LH MD4101 3068 5 ³⁄ ” 12 Gauge Frame w/ 3DL & ASA $ 386RH MD4800 3068 8 ³⁄ ” 12 Gauge Frame w/ 3DL & ASA $ 497LH MD4801 3068 8 ³⁄ ” 12 Gauge Frame w/ 3DL & ASA $ 497

MAX DUTY DOORS

MAX DUTY FRAMES

DKS







Frame Labor Charges

Door Prep Labor Charges

SHOP SERVICES FOR DFW WAREHOUSEPRICING: All Prices Listed Are Net

Prices Subject To Change Without NoticeFreight: F.O.B. Grand Prairie

Make Purchase Orders Out To:SSG TEXAS

Item Code Description Net PriceSINGLEFRAME Welding Single Opening HM Frame w/ Shipping Bar $20.00PAIRFRAME Welding Paired Opening HM Frame w/ Shipping Bar $24.00FLUSHSTRIKE Flush Bolt Preparation On Header $24.00SINGLECLOSER Closer Reinforcement Standard or Parallel (Single Opening) $8.00PAIRCLOSER Closer Reinforcement Standard or Parallel (Paired Opening) $12.00BLANKOUT Blank Out Strike $24.00RIMPREP Rim Panic Prep On Frame $12.00DBSTRIKE Deadbolt Prep On Frame $24.00FPWELD Punch & Dimple Frame & welding in pipe anchors $30.00RETROFRAME Cut in and Weld Hinge Reinforcement $30/hingeSTKCUTDOWN Cut Down Stick Material $30/cutEXPWELD Expansion Weld to Certain Jamb Depth $25.00ASTEXT Astragal Extension $25.00HDSPLICE Splicing Two Headers $35.00ELECSTK Electric Strike Prep $20.00FPCLOSER Full Profi le Closer Reinf. Weld in $15.00

Item Code Description Net PriceCUTOUTSTD Vision Lite or Louvers Cutout up to 24” x 12 $28.00CUTOUTLG Vision Lite or Louvers Cutout larger than 24” x 12” $36.00CUTOUTREIN Reinforce Cutout with Channel $35.00TRIMPREP Prep for Sectional Trim $25.00RIMPREPDOOR Rim Panic Prep $25.00DBPREPDOOR Deadbolt Prep $38.00DOORBOLT Lock Edge & Face Blank $30.00ASTINSTALL Install Astragal $40.00MBASA Convert MB to ASA $38.00FLUSHDOOR Flushbolt Prep Top & Bottom $40.00DOORCUTDOWN Door Undercut (No Welding) $25.00DRUCCHANNEL Door Undercut with Welded in Channel $50.00DRWIDTHCUTDOWN Door Undercut in Width with Welded in Channel $100.00RETRODOOR Cut Hinges in Retrofi t Door $50.00PEEPSITE Peep Hole Prep $5.00EDGEBLANK Blank Door Edge Out $20.00SSG Texas is now off ering door and frame fabricating capabilities at the Arlington location. This was the obvious nextstep in becoming a complete service center. Currently we are now off ering “Non-Labeled” shop services. In the near futurewe will be off ering labeling services as well. NOTE: 3 Hr. Mylar label will be removed on all modifi ed doors and frames You must have an open account with DKS Doors to utilize our shop services. All shop services are billed by and payableto SSG Texas. Doors and Frame material are billed by and payable to DKS Doors.

SSG TEXAS








ITEM# SIZE HINGELOCATION PREP STEEL LABEL WEIGHT

LBS.LIST

PRICE1801 2068 DKS Standard C CRS WHI 3 72 $4141802 MB1810 2468 DKS Standard C CRS WHI 3 78 $4141811 MB1807 2668 DKS Standard C CRS WHI 3 85 $4141808 MB1825 2868 DKS Standard C CRS WHI 3 89 $4141826 MB1869 21068 DKS Standard C CRS WHI 3 94 $4141870 MB1813

3068 DKS StandardC

CRS WHI 3 99 $4141818 MB1824 BR

CE1813

3068

Ceco C

CRS WHI 3 99 $414

CE1818 MBDE1813 Dean Steel CDE1818 MBCU1813 Curries CCU1818 MB

18303668 DKS Standard

CCRS WHI 3 112 $5191831 MB

1832 BR1834 3868 DKS Standard C CRS WHI 3 115 $5831837 MB1872 4068 DKS Standard C CRS WHI 3 120 $5831873 MB1835 2070 DKS Standard C CRS WHI 3 76 $4331836 MB1875 2470 DKS Standard C CRS WHI 3 $4331891 2670 DKS Standard C CRS WHI 3 87 $4331892 MB1894 2870 DKS Standard C CRS WHI 3 92 $4331895 MB1897 21070 DKS Standard C CRS WHI 3 100 $433

* Stocked in DFW only

SSG Texas can only sell doors and frames to authorized door and hardware distributors.

Nomenclature:C=161MB=86 edge blank faceBR=Blank Reinforced For Panic









LBS.LIST

PRICE1840

3070

DKS StandardC

CRS WHI 3

106

$433

1844 MB1847 BR

CE1840Ceco

CCE1844 MBCE1847 BRDE1840

Dean SteelC

DE1844 MBDE1847 BRCU1840

CurriesC

CU1844 MBCU1847 BR

REP1840Republic

CREP1844 MBREP1847 BR

18843070 DKS Standard

CGalvanized WHI 3 107 $4511887 MB

1890 BR1863

3080

DKS Standard

C

CRS WHI 3

118 $6441862 MB1864 BR1850 3670 MB 119 $5321849 C1853 3870 C 121 $5981856 BR1854

4070C

134 $5981855 MB1859 BR1865 4080 DKS Standard C CRS WHI 3 120 $7351866 MB











LBS.LIST

PRICEG1880

3068DKS Standard

C

Galvanized WHI 3

100 $433G1881 MBG1882 BR

CEG1813Ceco

CCEG1818 MB

G1884

3070

DKS StandardC

107 $451

G1887 MBG1890 BR

CEG1840Ceco

CCEG1844 MBCEG1847 BRCUG1840

CurriesC

CUG1844 MBCUG1847 BR

G18633080

DKS Standard

C119 $644G1862 MB

G1864 BRG1850

3670MB

120 $553G1849 CG1853

3870C

122 $617G1856 BRG1854

4070C

135 $617G1855 MBG1859 BRG1865

4080C

138 $715G1866 MB

* Stocked in Houston only



Hollow Metal Doors 18 Ga.










Hollow Metal Doors 16 Ga.

Inactive Flush Bolt Prep H.M. Doors 18 Ga.


LBS.LIST

PRICEG1622 3068

DKS Standard

C

Galvanized WHI 3

116 $640G1604

3070C

124 $668G1608 MBG1611 BRG1681 3090

MB180 $999

G1687 3690 190 $1350G1693 4090 200 $1908

ITEM# SIZE HINGELOCATION HAND PREP STEEL LABEL WEIGHT

LBS.LIST

PRICEG2006LIA 3068

DKS Standard

Left

ASA/FB Galvanized WHI 3106 $644G2006RIA Right

G2007LIA 3070 Left 108 $666G2007RIA Right

Continuous Hinge H.M. Doors 18 Gauge,15/32” Undercut in Width

ITEM# SIZE HINGELOCATION PREP STEEL GAUGE LABEL WEIGHT

LBS.LIST

PRICEG1813CH 3068

N/A

C

Galvanized 18 WHI 3

102 $471G1840CH 3070 C 104 $490G1847CH BRG1863CH 3080 C 119 $696G1611CH 3070 BR 16 124 $668

Retrofi t Hollow Metal Doors 18 Ga.ITEM# SIZE HINGE

LOCATION PREP STEEL LABEL WEIGHTLBS.

LIST PRICE

G1524 3068

N/A Lock Side Reinforced Galvanized Not Labeled

100 $516G1547 3070 107 $536G1548 4070 135 $742G1564 3080 119 $724











Steel Frames 4000 Series Masonry 16 Ga.ITEM# SIZE HAND HINGE

LOCATION ASSEMBLY DEPTH STEEL LABEL WEIGHTLBS.

LIST PRICE

4108 3068 RH

DKS Standard KD 5.75” Galvanized WHI 3

39 $2244109 LH 394112

3070RH 40

$2364113 LH 404116 3080 RH 54 $2804117 LH 544165 4068 RH 49 $2344166 LH 494167 4070 RH 50 $2454168 LH 504118 4080 RH 55 $2894119 LH 554505 6068 Pair 46 $2964511 6070 Pair 47 $309

-- 6080 Pair 52 $358

Steel Frames 5000 Series Drywall 16 Ga.ITEM# SIZE HAND HINGE

LOCATION ASSEMBLY DEPTH STEEL LABEL WEIGHTLBS.

LIST PRICE

5200 3068 RH

DKS Standard KD 5.875” CRS WHI 90

39 $2135201 LH 395500

3070RH 40

$2225501 LH 405623 4068 RH 40 $2175624 LH 405625 4070 RH 41 $2265626 LH 415636 6068 Pair 46 $2735637 6070 Pair 47 $283









Hollow Metal Doors 16 GaugeITEM# SIZE HINGE


LIST PRICE

1622 3068

DKS Standard

C

Galvanized WHI 3

116 $6401604

3070C 124 $668

1608 MB 124 $6681611 BR 124 $6681601 3068 MB 116 $6401620 3080 BR 159 $8281681 3090 MB 180 $9991687 3690 MB 190 $13501693 4090 MB 200 $1908

Inactive Flush Bolt Prep H.M. Doors 18 GaugeITEM# SIZE HINGE

LOCATION HAND PREP STEEL LABEL WEIGHTLBS.

LIST PRICE

2006LIA 3068

DKS Standard

LH

FB/ASA CRS WHI 3

105 $5302006RIA RH 1052007LIA 3070 Left 107 $5512007RIA Right 1072003LIA 2670 LH 87 $5512003RIA RH 872009LIA 3080 LH 118 $7432009RIA RH 118

Nomenclature:C=161MB=86 edge blank faceBR=Blank Reinforced For Panic6 Panel Hollow Metal Doors 18 Gauge


LBS.LIST

PRICE1700 3068

DKS StandardC

CRS WHI 3 105$4331701 MB

1705 3070 C $4571706 MB








Continuous Hinge H.M. Doors 18 Gauge, 15/32” undercut in width


LBS.LIST

PRICE1813CHI 3068

N/A

C

CRS WHI 3

101 $4511818CHI MB1840CHI 3070 C 103 $4701847CHI BR1863CHI

3080C

118 $6341862CHI MB1864CHI BR

Retrofi t Hollow Metal Doors 18 GaugeITEM# SIZE HINGE


LIST PRICE

1524 3068

N/A Lock Side Reinforced CRS Not Labeled

99 $4871547 3070 106 $5061548 4070 134 $7001564 3080 118 $6831544 2670 90 $5061545 2870 95 $5061549 3670 124 $623

1400 Series Steel Stiff ened Doors 16 Gauge HAND ITEM # SIZE PREP LIST PRICE

RH 1435 3070 C $694LHRH 1436 3070 MB $694LH

1-3/8” Hollow Metal DoorsITEM# SIZE HINGE


LIST PRICE

1112SPL 3068 2 Hinges (See DKS catalog) C 18 Gauge CRS - 105 $442







* Stocked in DFW onlyITEM# SIZE HAND HINGE

LOCATION ASSEMBLY DEPTH STEEL LABEL LIST PRICE

52003068

RH

DKS Standard KD

5.875”

CRS WHI 90

$2135201 LH5500

3070RH

$2225501 LH5623

4068RH

$2175624 LH5625

4070RH

$2265626 LH5635 6068 Pair $2735637 6070 Pair $2835707

3068RH

7.75”

$2285708 LH5709

3070RH

$2355710 LH5711

3080RH

$2625712 LH5713

4068RH

$2365714 LH5715

4070RH

$2435716 LH5717

4080RH

$2705718 LH5737

3068RH

8.25

$2575738 LH5739

3070RH

$2695740 LH5741

3080RH

$2975742 LH5743

4068RH

$2665744 LH5745

4070RH

$2785746 LH5747

4080RH

$3065748 LH

5000 Series Drywall - 16 Gauge







ITEM# SIZE HAND HINGELOCATION ASSEMBLY DEPTH STEEL LABEL LIST

PRICE4002

3070RH

DKSStandard KD 4.75” CRS WHI 3

$2054003 LH4500 6070 Pair $3094082

2668RH

DKS Standard KD 5.75”

CRS

WHI 3

$1954083 LH4084

2670RH

$2054085 LH4100

3068RH

$1954101 LH4104

3070RH

$2054105 LH4108

3068RH

Galvanized

$2244109 LH4112

3070RH

$2364113 LH4124

3668RH

$2344125 LH4122

3670RH

$2454123 LH4128

4070RH

CRS $2134129 LH4116

3080RH

Galvanized

$2804117 LH4118

4080RH

$2894119 LH4511 6070 Pair $3094525 8070 Pair $3184733 3070 RH

DKSStandard KD

7.125”

Galvanized WHI 3

$2684734 3070 LH4745 4070 RH

$2834746 4070 LH4220 3068 RH

7.75”$2604221 LH

4224 3070 RH $2684225 LH

4000 Series Masonry -16 Gauge* Stocked in DFW only







4000 Series Masonry -16 Gauge* Stocked in DFW only

ITEM# SIZE HAND HINGELOCATION ASSEMBLY DEPTH STEEL LABEL LIST

PRICE4228 3080 RH

DKS Standard KD

7.75”

Galvanized WHI3

$3054229 LH4451 4068 RH $2754452 LH4453 4070 RH $2834454 LH4230 4080 RH $3204231 LH4534 6068 Pair $3484542 6070 Pair $3624450 6080 Pair $3984340 3068 RH

8.25”

$2784341 LH4344 3070 RH $2894345 LH4348 3080 RH $3184349 LH4455 4068 RH $2974456 LH4457 4070 RH $3094458 LH4350 4080 RH $3374351 LH4569 6068 Pair $3934570 6070 Pair $4074463 6080 Pair $4284800 3068 RH

8.75”

$2414801 LH4803 3070 RH $2514804 LH4459 3080 RH $3184460 LH4806 4068 RH $2584807 LH4809 4070 RH $2684810 LH4461 4080 RH $3374462 LH4539 6068 Pair $3944540 6070 Pair $4074541 6080 Pair $428







ITEM# DEPTH SIZE STEEL LISTPRICE

57530H4 36” 5.75” CRS $86

57540H4 48” 5.75” CRS $93

57560H4 72” 5.75” CRS $109

4” FACE HEADS 16 GaugeITEM# DEPTH SIZE TYPE LISTPRICE

7000 5.75” 10’ Galvanized $105

CO7000 5.75” 10” Cased Open $118

MUL575 5.75” 10” Blank Mullion $204

Blank Masonry Stick Material

Door and Frame Handing ChartSINGLE SWING DOORS

DOUBLE DOORS

When door swings towards you and hinges are on right side of the door – Door is R.H.R. / Frame is L.H.When door swings inside and hinges are on right side of the door – Door is R.H. / Frame is R.H.

Right Hand Reverse Door (Swing Out) Left Hand Frame

Left Hand Reverse Door(Swing Out) Right Hand Frame

Right Hand Door (Swing In)Right Hand Frame

Left Hand Door (Swing In)Left Hand Frame

When door leaf swing towards you and hinges are on the right side of active leaf – Door is R.H.R Active / Frame is L.H. Active

When door leaf swing inside and hinges are on the right side of active leaf – Door is R.H. Active / Frames is R.H. Active

OUTSIDEPair of Doors – R.H.R. Active

(Swing Out)Double Door Frame L.H. Active

OUTSIDEPair of Doors – L.H.R. Active

(Swing Out)Double Door Frame R.H. Active

OUTSIDEPair of Doors – R.H. Active

(Swing In)Double Door Frame R.H. Active

OUTSIDEPair of Doors – L.H. Active

(Swing In)Double Door Frame L.H. Active







EXP 4000 Expandable Masonry Frames

16 Gauge Galvanized5.625” to 8.75” DepthExpandable Masonry Frame90 Minutes WHI

The DKS “EXP” adjustable frame is a three piece system designed to adjust to multiple depth wall conditions. Slide rails placed inside the frame throat allow the frame to accommodate all jamb depths from 4 5/8” to 7 ¾” using a single frame.The frame material used in manufacturing is A-40 galvanized 16 gauge. Prime Painted with two part epoxy baked on at the factory.Three 7 gauge 4.5 x 4.5 hinge reinforcements for 6’8” and 7’0” heights. Four 7 gauge hinge reinforcements for 8’0” height frames. All locations are DKS Standard. All hinge reinforcements are prepared to accept standard weight or heavy weight template hinges. The ASA strike reinforcement is 12 gauge material drilled and tapped to accept 12-24 screws.The frame is prepared for silencer application.

* Stocked in DFW & Houston

COMPLETE FRAME SIZES

WIDTH HEIGHT LIST PRICE

SINGLE

3’0”6'8" $3707'0" 3828'0" 402

3’6”6'8" 3807'0" 3928'0" 412

4’0”6'8" 3887'0" 4008'0" 420

PAIR

6’0”6'8" 4257'0" 4378’0" 457

FRAME COMPONENTSPART LENGTH LIST PRICE

HINGEJAMB

6'8" $1597'0" 1658'0" 175

STRIKEJAMB

6'8" 1517'0" 1578'0" 167

SINGLEHEAD

3’0” 603’6” 704’0” 78

PAIRHEAD 6’0” 107

HOW TO ORDERExample: 3070 Part # 5625 (5.625” to 8.75”)

Expandable Masonry Right Hand Frame

TYPE SIZE PARTX 305625 HX 705625 HJRX 705625 SJR

TYPE X (Expandable Masonry)

SIZE Width / Height

PART

H (Head),HJ (Hinge Jamb Right or Left), SJ (Strike Jamb Right or Left),PR (Pair Head)







EXP 5000 Expandable Drywall Frames

16 Gauge Galvanized5.625” to 8.75” DepthExpandable Drywall Frame90 Minutes WHI

The DKS “EXP” adjustable frame is a three piece system designed to adjust to multiple depth wall conditions. Slide rails placed inside the frame throat allow the frame to accommodate all jamb depths from 4 5/8” to 7 ¾” using a single frame.The frame material used in manufacturing is A-40 galvanized 16 gauge. Prime Painted with two part epoxy baked on at the factory.Three 7 gauge 4.5 x 4.5 hinge reinforcements for 6’8” and 7’0” heights. Four 7 gauge hinge reinforcements for 8’0” height frames. All locations are DKS Standard. All hinge reinforcements are prepared to accept standard weight or heavy weight template hinges. The ASA strike reinforcement is 12 gauge material drilled and tapped to accept 12-24 screws.The frame is prepared for silencer application.

* Stocked in DFW & Houston

COMPLETE FRAME SIZES

WIDTH HEIGHT LIST PRICE

SINGLE

3’0”6'8" $3707'0" 3828'0" 402

3’6”6'8" 3807'0" 3928'0" 412

4’0”6'8" 3887'0" 4008'0" 420

PAIR

6’0”6'8" 4257'0" 4378’0" 457

FRAME COMPONENTSPART LENGTH LIST PRICE

HINGEJAMB

6'8" $1597'0" 1658'0" 175

STRIKEJAMB

6'8" 1517'0" 1578'0" 167

SINGLEHEAD

3’0” 603’6” 704’0” 78

PAIRHEAD 6’0” 107

HOW TO ORDERExample: 3070 Part # 5625 (5.625” to 8.75”)

Expandable Masonry Right Hand Frame

TYPE SIZE PARTX 305625 HX 705625 HJRX 705625 SJR

TYPE X (Expandable Masonry)

SIZE Width / Height

PART

H (Head),HJ (Hinge Jamb Right or Left), SJ (Strike Jamb Right or Left),PR (Pair Head)




ACCESSORIES PRICING IS NET PRICE



ILLUSTRATION ITEM# DESCRIPTION LISTPRICE

MAS575-4 Masonry Tube Anchor, 3/4” EMT Tubing2” Strap Width, 5-3/4” Unequal Rabbet, 16 Ga. $2.70 ea

FBTAB-6 Flush Bolt Tabs, SPLIT Tail, 1” x 2-1/2”3/32 Off set, 8-32 Tap, 1/2” C/L for 1” Body, 11 Ga. $2.30 ea

FBGID-4 Flush Bolt Guide, 5/16” Off set1/2” D-Hole, For Door Top & Bottom, 12 Ga. $2.88 ea

PRECLAM-8 Pressure Clamp Assembly, 16 Ga. $3.66 ea

LFF 161 Cylindrical Lock Filler, 1-1/8” x 2 1/4”Mahined C.S. Holes, 11 Ga. $2.88 ea

DBFIL-5 Deadlock Filler, 1-1/8” x 2 1/4”Machined C.S. Holes For Doors, 10 Ga. $2.88 ea

MLCYL-3Conversion Assembly

Mort Lock to Cylindrical Lock, 1-1/4” x 8”3/8” Off Center, 1-1/8” x 2-1/4” Face Plate, 12 Ga.

$19.46

ACCESSORIES







ACCESSORIESILLUSTRATION ITEM# DESCRIPTION LIST

PRICE

MLASA-4

Conversion AssemblyMort Lock to 4-7/8” Strike

1-1/4” x 8”3/8” Off Center

1-1/8” x 2-1/4” Face Plate12 Ga.

$19.46

MLF86-1

86 Mortise Lock Filler1-1/4” x 8”

Machined C.S. Holes16 Ga.

$5.76

DBLAT-1

Cylindrical Lock - Dead Lock, SPLIT Tail1-1/4” x 4-1/2”

3/32 Off set1” Hole

8-32 Tap12 Ga.

$5.25 ea

DBCONV-2

Deadlock Reinforcement PlateFor 1 ¾” Doors

Dimensions: 2 3⁄16” x 1 ⅜” x 1 9⁄16”Thickness: 14 Gauge

$5.68

FLUSHSTRK-2

Reversible Flush Bolt StrikeWith Backing Plate

1-1/8” x 3-3/4”3/32” Off est

8-32 Tap16 Ga.

$11.37 ea

TSTRK-2

2-3/4” Strike Reinforcement (frame)1” x 2-1/2”

7/8” x 1-1/4” Hole8-32 Tap12 Ga.

$2.88 ea

SF

Strike Filler4-7/8” x 1-1/4”

1-5/8” at Lip For Frame11 Ga.

$3.84 ea








ASATAB-7

4-7/8” Strike Reinforcement, SPLIT Tail1” x 2-1/2” Tab

3/32” Off set12-24 Ta

$2.30 ea

WS475Wood Stud Anchor 2 x 4 Stud

Welded Type 18 Ga.For 4-3/4” Frames

$4.07 ea

WS575 Wood Stud Anchor for 5 ¾” Frame $4.07 eaWS675 Wood Stud Anchor for 6 ¾” Frame $4.62 ea

WS7125 Wood Stud Anchor For 7-1/8” Frames $4.62 eaWS775 Wood Stud Anchor For 7-3/4” Frames $4.62 eaWS825 Wood Stud Anchor for 8 ¼” Frame $4.98 eaWS875 Wood Stud Anchor for 8 ¾” Frame $4.98 ea

CR01Closer Reinforcement

1-3/4” x 16”12 Ga.

$5.43 ea

SB36Spreader Bar

3/4” x 3/4” x 36”16 Ga.

$4.53 ea

SB72Spreader Bar

3/4” x 3/4” x 72”16 Ga.

$9.05 ea

ST-8114

#8 TEK 1 ¼” Self-Tapping ScrewLength: 1 ¼”

Head: Phillips, Oval headType: Self-Drilling, Self-Tapping

$8.13 per

hundred

WD-6Wood Lag Screw

6” Long⅜” Dia.

$5.88per

hundred

CLFC-78

CylindricalLock Face

Cover18 Ga.

$2.17 ea

HINGE SHIM-94 4-1/2” Hinge ShimReversible $1.81 ea

ACCESSORIES








DC-10

C ChannelDoor / Framing channel for reinforcing steel doors

in listed glass frameSold in lengths of 10’ and can be cut to size

Dimensions: ¾” x ¾” x 10’Thickness: 0.053 in. (16 gauge)

$41.63

C-BRKTL (LH)C-BRKTR (RH)

Handed Corner Bracket/FrameFor LH or RH $1.72

CRFP-30 Full Profi le Closer Reinforcement14” Long for 5 ¾” frame depth $15.29

DBOX-638

Dust BoxDimensions (Inner Box): Length: 3 ⅝”L x 1 ⅜”W

Total Length: 6 ⅜”14 Gauge

$3.00

DY-5 Stud Dynabolt Anchor5” Long x ⅜” Dia. $5.43

HFPLTHinge Filler Plate

Use: For Doors and Frames4 ½” hinges

$4.16

MAS01 Wire Masonry Anchor $1.79

MPAA-10

Multi-Purpose Adjustable Anchor(2 per set)

Can be used as a single 8 ¾” wood/metal stud or complete opening anchor

$3.89

SPCAN 82 Prime Coat Spray Can $21.90

ACCESSORIES








SS775Steel Stud Anchor, Welded Type,

Thickness: 18 Ga. Steel Stud for 7 ¾” Frame

$3.38

DHRF-825 4-1/2” Door Hinge Reinforcement3/16” x 1-1/4” x 8” $5.43

FRHR-1 4-1/2” Frame Hinge Reinforcement3/16” x 1-1/4” x 8” $5.43

DSM21 Door Silencer. 1/2” Dia. 11/16” Length, For MetalFrames

$15.39per200

ZAST686’8” Z Astragal

Flush Bolt & ASA PrepNon-Handed

$44.35

ZAST70LZAST70R

7’0” Z Astragal LEFT7’0” Z Astragal RIGHT $45.52

ZAST80LZAST80R

8’0” Z Astragal LEFT8’0” Z Astragal RIGHT $71.50

ZAST-ASA68NH6’8” Z AstragalASA Prep OnlyNon-Handed

$44.35

ZAST-ASA70LH 7’0” Z Astragal LEFT HANDASA Prep Only

45.52ZAST-ASA70RH 7’0” Z Astragal RIGHT HAND

ASA Prep Only

AST68 6’8” Flat AstragalNo Hardware Prep $39.01



ACCESSORIESACCESSORIESACCESSORIES

NOMINAL DOOR SIZE W & H (in.)

WEIGHT (lbs) PRIMECOATED

STAINLESSSTEEL

8 x 812 x 1218 x 1824 x 24

2.74.711.218.0

UF-5000 UNIVERSAL ACCESS DOOR / FLUSH FOR ALL SURFACES

Add $14.00 list for cylinder lock & key, all keyed alike

$22.30$26.10$43.80$61.10

$75.40$102.00$206.00$263.00

FLUSH FOR DRYWALL WITH DRYWALL BEAD FLANGE


WEIGHT (lbs) PRIMECOATED

8 x 812 x 1218 x 1824 x 24

2.03.06.09.0

Add $14.00 list for cylinder lock & key, all keyed alike

$30.50$35.40$48.60$72.20

PA-3000 PLASTIC ACCESS DOOR, FLUSH FOR ALL SURFACES


WEIGHT (lbs) PRICE

8 x 812 x 1218 x 1822 x 22

0.51

2.254

18.2020.3039.7049.70

SIZE W & H (in.)

WEIGHT (lbs)

PRICE

30 x 3636 x 36

155170

MATERIALMODELROOF HATCHSTYLE

G3844G4444

RHG GALVANIZED STEEL ROOF ACCESS HATCHES

Additional Options:

$703.00$976.00

DW-5040


WEIGHT (lbs)

PRIME COATED

STAINLESS STEEL

8 X 8 2.7 $23.30 $79.20

12 X 12 4.7 $27.20 $107.10

18 X 18 11.2 $45.80 $217.00

24 X 24 18.0 $63.90 $277.00


WEIGHT (lbs)

PRIME COATED

8 X 8 2.0 $31.70

12 X 12 3.0 $36.80

18 X 18 6.0 $50.60

24 X 24 9.0 $75.60


WEIGHT (lbs)

PRIME COATED

8 X 8 0.5 $19.00

12 X 12 1 $21.30

18 X 18 2.25 $41.20

22 X 22 4 $51.70

ROOF HATCH STYLE MODEL MATERIAL SIZE W & H (in.) WEIGHT PRICE

LADDER ACCESS G3844 GALVANIZED 30 X 36 155 $703.00

LADDER ACCESS G4444 GALVANIZED 36 X 36 170 $976.00

2020 Exchange Drive Arlington, Texas 75050 • Phone 817-275-3070 • Fax 817-275-3068Website: http://www.ssg-texas.com

Warehouse Pricing TX - SSG Texas · 2020. 8. 28. · Stocking Warehouse and Factory Representatives...

Documents

Transcript of Warehouse Pricing TX - SSG Texas · 2020. 8. 28. · Stocking Warehouse and Factory Representatives...