WARC BAND 30m TS-180S Kenwood · WARC BAND 30m TS-180S Kenwood Installation in the circuit TX Band...
3
WARC BAND 30m TS-180S Kenwood Installation in the circuit TX Band 30m ( 10 MHz ) : Coilpack Unit ( X44-1290-00 ) AUX3 LPF Unit (X51-1180-00 ) A3/C3 point > Selection Key Material List: Is necessary 2 circuit board, one to Coil Pack and other to LPF Unit C1 = 82pf ceramic C2 = 2,2pf ceramic C3 = 82pf ceramic L1 = 3 turn 0,6uH primary ( IF Coil ) L1 = 18 turn 4,8uH secondary ( IF Coil ) L2 = 18 turn 4,8uH primary ( IF Coil ) L2 = 3 turn 0.6uH secondary ( IF Coil ) ADJUSTs : do the adjust ( IF Coil ) with an RF generator before install it on the circuit. Developed by PY2OHH - Miguel Instaled by PU4ASL - Ademilton
Transcript of WARC BAND 30m TS-180S Kenwood · WARC BAND 30m TS-180S Kenwood Installation in the circuit TX Band...
-
WARC BAND 30m TS-180S Kenwood Installation in the circuit TX Band 30m ( 10 MHz ) :
Coilpack Unit ( X44-1290-00 ) AUX3 LPF Unit (X51-1180-00 ) A3/C3 point > Selection Key
Material List: Is necessary 2 circuit board, one to Coil Pack and other to LPF Unit C1 = 82pf ceramic C2 = 2,2pf ceramic C3 = 82pf ceramic L1 = 3 turn 0,6uH primary ( IF Coil ) L1 = 18 turn 4,8uH secondary ( IF Coil ) L2 = 18 turn 4,8uH primary ( IF Coil ) L2 = 3 turn 0.6uH secondary ( IF Coil )
ADJUSTs : do the adjust ( IF Coil ) with an RF generator before install it on the circuit.
Developed by PY2OHH - Miguel Instaled by PU4ASL - Ademilton
-
COILPACK UNIT - Circuit Board
COILPACK UNIT - Diagram
-
LPF UNIT - Circuit Board
LPF UNIT - Circuit Diagram